File Index
Files and directories
Sign in
FILE

tas5805m.c

File preview with syntax highlighting.

linux-6.19.14/sound/soc/codecs/tas5805m.c C
  1// SPDX-License-Identifier: GPL-2.0
  2//
  3// Driver for the TAS5805M Audio Amplifier
  4//
  5// Author: Andy Liu <andy-liu@ti.com>
  6// Author: Daniel Beer <daniel.beer@igorinstitute.com>
  7//
  8// This is based on a driver originally written by Andy Liu at TI and
  9// posted here:
 10//
 11//    https://e2e.ti.com/support/audio-group/audio/f/audio-forum/722027/linux-tas5825m-linux-drivers
 12//
 13// It has been simplified a little and reworked for the 5.x ALSA SoC API.
 14
 15#include <linux/module.h>
 16#include <linux/moduleparam.h>
 17#include <linux/kernel.h>
 18#include <linux/firmware.h>
 19#include <linux/slab.h>
 20#include <linux/of.h>
 21#include <linux/init.h>
 22#include <linux/i2c.h>
 23#include <linux/regmap.h>
 24#include <linux/gpio/consumer.h>
 25#include <linux/regulator/consumer.h>
 26#include <linux/atomic.h>
 27#include <linux/workqueue.h>
 28
 29#include <sound/soc.h>
 30#include <sound/pcm.h>
 31#include <sound/initval.h>
 32
 33/* Datasheet-defined registers on page 0, book 0 */
 34#define REG_PAGE		0x00
 35#define REG_DEVICE_CTRL_1	0x02
 36#define REG_DEVICE_CTRL_2	0x03
 37#define REG_SIG_CH_CTRL		0x28
 38#define REG_SAP_CTRL_1		0x33
 39#define REG_FS_MON		0x37
 40#define REG_BCK_MON		0x38
 41#define REG_CLKDET_STATUS	0x39
 42#define REG_VOL_CTL		0x4c
 43#define REG_AGAIN		0x54
 44#define REG_ADR_PIN_CTRL	0x60
 45#define REG_ADR_PIN_CONFIG	0x61
 46#define REG_CHAN_FAULT		0x70
 47#define REG_GLOBAL_FAULT1	0x71
 48#define REG_GLOBAL_FAULT2	0x72
 49#define REG_FAULT		0x78
 50#define REG_BOOK		0x7f
 51
 52/* DEVICE_CTRL_2 register values */
 53#define DCTRL2_MODE_DEEP_SLEEP	0x00
 54#define DCTRL2_MODE_SLEEP	0x01
 55#define DCTRL2_MODE_HIZ		0x02
 56#define DCTRL2_MODE_PLAY	0x03
 57
 58#define DCTRL2_MUTE		0x08
 59#define DCTRL2_DIS_DSP		0x10
 60
 61/* This sequence of register writes must always be sent, prior to the
 62 * 5ms delay while we wait for the DSP to boot.
 63 */
 64static const uint8_t dsp_cfg_preboot[] = {
 65	0x00, 0x00, 0x7f, 0x00, 0x03, 0x02, 0x01, 0x11,
 66	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
 67	0x00, 0x00, 0x7f, 0x00, 0x03, 0x02,
 68};
 69
 70static const uint32_t tas5805m_volume[] = {
 71	0x0000001B, /*   0, -110dB */ 0x0000001E, /*   1, -109dB */
 72	0x00000021, /*   2, -108dB */ 0x00000025, /*   3, -107dB */
 73	0x0000002A, /*   4, -106dB */ 0x0000002F, /*   5, -105dB */
 74	0x00000035, /*   6, -104dB */ 0x0000003B, /*   7, -103dB */
 75	0x00000043, /*   8, -102dB */ 0x0000004B, /*   9, -101dB */
 76	0x00000054, /*  10, -100dB */ 0x0000005E, /*  11,  -99dB */
 77	0x0000006A, /*  12,  -98dB */ 0x00000076, /*  13,  -97dB */
 78	0x00000085, /*  14,  -96dB */ 0x00000095, /*  15,  -95dB */
 79	0x000000A7, /*  16,  -94dB */ 0x000000BC, /*  17,  -93dB */
 80	0x000000D3, /*  18,  -92dB */ 0x000000EC, /*  19,  -91dB */
 81	0x00000109, /*  20,  -90dB */ 0x0000012A, /*  21,  -89dB */
 82	0x0000014E, /*  22,  -88dB */ 0x00000177, /*  23,  -87dB */
 83	0x000001A4, /*  24,  -86dB */ 0x000001D8, /*  25,  -85dB */
 84	0x00000211, /*  26,  -84dB */ 0x00000252, /*  27,  -83dB */
 85	0x0000029A, /*  28,  -82dB */ 0x000002EC, /*  29,  -81dB */
 86	0x00000347, /*  30,  -80dB */ 0x000003AD, /*  31,  -79dB */
 87	0x00000420, /*  32,  -78dB */ 0x000004A1, /*  33,  -77dB */
 88	0x00000532, /*  34,  -76dB */ 0x000005D4, /*  35,  -75dB */
 89	0x0000068A, /*  36,  -74dB */ 0x00000756, /*  37,  -73dB */
 90	0x0000083B, /*  38,  -72dB */ 0x0000093C, /*  39,  -71dB */
 91	0x00000A5D, /*  40,  -70dB */ 0x00000BA0, /*  41,  -69dB */
 92	0x00000D0C, /*  42,  -68dB */ 0x00000EA3, /*  43,  -67dB */
 93	0x0000106C, /*  44,  -66dB */ 0x0000126D, /*  45,  -65dB */
 94	0x000014AD, /*  46,  -64dB */ 0x00001733, /*  47,  -63dB */
 95	0x00001A07, /*  48,  -62dB */ 0x00001D34, /*  49,  -61dB */
 96	0x000020C5, /*  50,  -60dB */ 0x000024C4, /*  51,  -59dB */
 97	0x00002941, /*  52,  -58dB */ 0x00002E49, /*  53,  -57dB */
 98	0x000033EF, /*  54,  -56dB */ 0x00003A45, /*  55,  -55dB */
 99	0x00004161, /*  56,  -54dB */ 0x0000495C, /*  57,  -53dB */
100	0x0000524F, /*  58,  -52dB */ 0x00005C5A, /*  59,  -51dB */
101	0x0000679F, /*  60,  -50dB */ 0x00007444, /*  61,  -49dB */
102	0x00008274, /*  62,  -48dB */ 0x0000925F, /*  63,  -47dB */
103	0x0000A43B, /*  64,  -46dB */ 0x0000B845, /*  65,  -45dB */
104	0x0000CEC1, /*  66,  -44dB */ 0x0000E7FB, /*  67,  -43dB */
105	0x00010449, /*  68,  -42dB */ 0x0001240C, /*  69,  -41dB */
106	0x000147AE, /*  70,  -40dB */ 0x00016FAA, /*  71,  -39dB */
107	0x00019C86, /*  72,  -38dB */ 0x0001CEDC, /*  73,  -37dB */
108	0x00020756, /*  74,  -36dB */ 0x000246B5, /*  75,  -35dB */
109	0x00028DCF, /*  76,  -34dB */ 0x0002DD96, /*  77,  -33dB */
110	0x00033718, /*  78,  -32dB */ 0x00039B87, /*  79,  -31dB */
111	0x00040C37, /*  80,  -30dB */ 0x00048AA7, /*  81,  -29dB */
112	0x00051884, /*  82,  -28dB */ 0x0005B7B1, /*  83,  -27dB */
113	0x00066A4A, /*  84,  -26dB */ 0x000732AE, /*  85,  -25dB */
114	0x00081385, /*  86,  -24dB */ 0x00090FCC, /*  87,  -23dB */
115	0x000A2ADB, /*  88,  -22dB */ 0x000B6873, /*  89,  -21dB */
116	0x000CCCCD, /*  90,  -20dB */ 0x000E5CA1, /*  91,  -19dB */
117	0x00101D3F, /*  92,  -18dB */ 0x0012149A, /*  93,  -17dB */
118	0x00144961, /*  94,  -16dB */ 0x0016C311, /*  95,  -15dB */
119	0x00198A13, /*  96,  -14dB */ 0x001CA7D7, /*  97,  -13dB */
120	0x002026F3, /*  98,  -12dB */ 0x00241347, /*  99,  -11dB */
121	0x00287A27, /* 100,  -10dB */ 0x002D6A86, /* 101,  -9dB */
122	0x0032F52D, /* 102,   -8dB */ 0x00392CEE, /* 103,   -7dB */
123	0x004026E7, /* 104,   -6dB */ 0x0047FACD, /* 105,   -5dB */
124	0x0050C336, /* 106,   -4dB */ 0x005A9DF8, /* 107,   -3dB */
125	0x0065AC8C, /* 108,   -2dB */ 0x00721483, /* 109,   -1dB */
126	0x00800000, /* 110,    0dB */ 0x008F9E4D, /* 111,    1dB */
127	0x00A12478, /* 112,    2dB */ 0x00B4CE08, /* 113,    3dB */
128	0x00CADDC8, /* 114,    4dB */ 0x00E39EA9, /* 115,    5dB */
129	0x00FF64C1, /* 116,    6dB */ 0x011E8E6A, /* 117,    7dB */
130	0x0141857F, /* 118,    8dB */ 0x0168C0C6, /* 119,    9dB */
131	0x0194C584, /* 120,   10dB */ 0x01C62940, /* 121,   11dB */
132	0x01FD93C2, /* 122,   12dB */ 0x023BC148, /* 123,   13dB */
133	0x02818508, /* 124,   14dB */ 0x02CFCC01, /* 125,   15dB */
134	0x0327A01A, /* 126,   16dB */ 0x038A2BAD, /* 127,   17dB */
135	0x03F8BD7A, /* 128,   18dB */ 0x0474CD1B, /* 129,   19dB */
136	0x05000000, /* 130,   20dB */ 0x059C2F02, /* 131,   21dB */
137	0x064B6CAE, /* 132,   22dB */ 0x07100C4D, /* 133,   23dB */
138	0x07ECA9CD, /* 134,   24dB */ 0x08E43299, /* 135,   25dB */
139	0x09F9EF8E, /* 136,   26dB */ 0x0B319025, /* 137,   27dB */
140	0x0C8F36F2, /* 138,   28dB */ 0x0E1787B8, /* 139,   29dB */
141	0x0FCFB725, /* 140,   30dB */ 0x11BD9C84, /* 141,   31dB */
142	0x13E7C594, /* 142,   32dB */ 0x16558CCB, /* 143,   33dB */
143	0x190F3254, /* 144,   34dB */ 0x1C1DF80E, /* 145,   35dB */
144	0x1F8C4107, /* 146,   36dB */ 0x2365B4BF, /* 147,   37dB */
145	0x27B766C2, /* 148,   38dB */ 0x2C900313, /* 149,   39dB */
146	0x32000000, /* 150,   40dB */ 0x3819D612, /* 151,   41dB */
147	0x3EF23ECA, /* 152,   42dB */ 0x46A07B07, /* 153,   43dB */
148	0x4F3EA203, /* 154,   44dB */ 0x58E9F9F9, /* 155,   45dB */
149	0x63C35B8E, /* 156,   46dB */ 0x6FEFA16D, /* 157,   47dB */
150	0x7D982575, /* 158,   48dB */
151};
152
153#define TAS5805M_VOLUME_MAX	((int)ARRAY_SIZE(tas5805m_volume) - 1)
154#define TAS5805M_VOLUME_MIN	0
155
156struct tas5805m_priv {
157	struct i2c_client		*i2c;
158	struct regulator		*pvdd;
159	struct gpio_desc		*gpio_pdn_n;
160
161	uint8_t				*dsp_cfg_data;
162	int				dsp_cfg_len;
163
164	struct regmap			*regmap;
165
166	int				vol[2];
167	bool				is_powered;
168	bool				is_muted;
169
170	struct work_struct		work;
171	struct mutex			lock;
172};
173
174static void set_dsp_scale(struct regmap *rm, int offset, int vol)
175{
176	uint8_t v[4];
177	uint32_t x = tas5805m_volume[vol];
178	int i;
179
180	for (i = 0; i < 4; i++) {
181		v[3 - i] = x;
182		x >>= 8;
183	}
184
185	regmap_bulk_write(rm, offset, v, ARRAY_SIZE(v));
186}
187
188static void tas5805m_refresh(struct tas5805m_priv *tas5805m)
189{
190	struct regmap *rm = tas5805m->regmap;
191
192	dev_dbg(&tas5805m->i2c->dev, "refresh: is_muted=%d, vol=%d/%d\n",
193		tas5805m->is_muted, tas5805m->vol[0], tas5805m->vol[1]);
194
195	regmap_write(rm, REG_PAGE, 0x00);
196	regmap_write(rm, REG_BOOK, 0x8c);
197	regmap_write(rm, REG_PAGE, 0x2a);
198
199	/* Refresh volume. The actual volume control documented in the
200	 * datasheet doesn't seem to work correctly. This is a pair of
201	 * DSP registers which are *not* documented in the datasheet.
202	 */
203	set_dsp_scale(rm, 0x24, tas5805m->vol[0]);
204	set_dsp_scale(rm, 0x28, tas5805m->vol[1]);
205
206	regmap_write(rm, REG_PAGE, 0x00);
207	regmap_write(rm, REG_BOOK, 0x00);
208
209	/* Set/clear digital soft-mute */
210	regmap_write(rm, REG_DEVICE_CTRL_2,
211		(tas5805m->is_muted ? DCTRL2_MUTE : 0) |
212		DCTRL2_MODE_PLAY);
213}
214
215static int tas5805m_vol_info(struct snd_kcontrol *kcontrol,
216			     struct snd_ctl_elem_info *uinfo)
217{
218	uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
219	uinfo->count = 2;
220
221	uinfo->value.integer.min = TAS5805M_VOLUME_MIN;
222	uinfo->value.integer.max = TAS5805M_VOLUME_MAX;
223	return 0;
224}
225
226static int tas5805m_vol_get(struct snd_kcontrol *kcontrol,
227			    struct snd_ctl_elem_value *ucontrol)
228{
229	struct snd_soc_component *component = snd_kcontrol_chip(kcontrol);
230	struct tas5805m_priv *tas5805m =
231		snd_soc_component_get_drvdata(component);
232
233	mutex_lock(&tas5805m->lock);
234	ucontrol->value.integer.value[0] = tas5805m->vol[0];
235	ucontrol->value.integer.value[1] = tas5805m->vol[1];
236	mutex_unlock(&tas5805m->lock);
237
238	return 0;
239}
240
241static inline int volume_is_valid(int v)
242{
243	return (v >= TAS5805M_VOLUME_MIN) && (v <= TAS5805M_VOLUME_MAX);
244}
245
246static int tas5805m_vol_put(struct snd_kcontrol *kcontrol,
247			    struct snd_ctl_elem_value *ucontrol)
248{
249	struct snd_soc_component *component = snd_kcontrol_chip(kcontrol);
250	struct tas5805m_priv *tas5805m =
251		snd_soc_component_get_drvdata(component);
252	int ret = 0;
253
254	if (!(volume_is_valid(ucontrol->value.integer.value[0]) &&
255	      volume_is_valid(ucontrol->value.integer.value[1])))
256		return -EINVAL;
257
258	mutex_lock(&tas5805m->lock);
259	if (tas5805m->vol[0] != ucontrol->value.integer.value[0] ||
260	    tas5805m->vol[1] != ucontrol->value.integer.value[1]) {
261		tas5805m->vol[0] = ucontrol->value.integer.value[0];
262		tas5805m->vol[1] = ucontrol->value.integer.value[1];
263		dev_dbg(component->dev, "set vol=%d/%d (is_powered=%d)\n",
264			tas5805m->vol[0], tas5805m->vol[1],
265			tas5805m->is_powered);
266		if (tas5805m->is_powered)
267			tas5805m_refresh(tas5805m);
268		ret = 1;
269	}
270	mutex_unlock(&tas5805m->lock);
271
272	return ret;
273}
274
275static const struct snd_kcontrol_new tas5805m_snd_controls[] = {
276	{
277		.iface	= SNDRV_CTL_ELEM_IFACE_MIXER,
278		.name	= "Master Playback Volume",
279		.access	= SNDRV_CTL_ELEM_ACCESS_TLV_READ |
280			  SNDRV_CTL_ELEM_ACCESS_READWRITE,
281		.info	= tas5805m_vol_info,
282		.get	= tas5805m_vol_get,
283		.put	= tas5805m_vol_put,
284	},
285};
286
287static void send_cfg(struct regmap *rm,
288		     const uint8_t *s, unsigned int len)
289{
290	unsigned int i;
291
292	for (i = 0; i + 1 < len; i += 2)
293		regmap_write(rm, s[i], s[i + 1]);
294}
295
296/* The TAS5805M DSP can't be configured until the I2S clock has been
297 * present and stable for 5ms, or else it won't boot and we get no
298 * sound.
299 */
300static int tas5805m_trigger(struct snd_pcm_substream *substream, int cmd,
301			    struct snd_soc_dai *dai)
302{
303	struct snd_soc_component *component = dai->component;
304	struct tas5805m_priv *tas5805m =
305		snd_soc_component_get_drvdata(component);
306
307	switch (cmd) {
308	case SNDRV_PCM_TRIGGER_START:
309	case SNDRV_PCM_TRIGGER_RESUME:
310	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
311		dev_dbg(component->dev, "clock start\n");
312		schedule_work(&tas5805m->work);
313		break;
314
315	case SNDRV_PCM_TRIGGER_STOP:
316	case SNDRV_PCM_TRIGGER_SUSPEND:
317	case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
318		break;
319
320	default:
321		return -EINVAL;
322	}
323
324	return 0;
325}
326
327static void do_work(struct work_struct *work)
328{
329	struct tas5805m_priv *tas5805m =
330	       container_of(work, struct tas5805m_priv, work);
331	struct regmap *rm = tas5805m->regmap;
332
333	dev_dbg(&tas5805m->i2c->dev, "DSP startup\n");
334
335	mutex_lock(&tas5805m->lock);
336	/* We mustn't issue any I2C transactions until the I2S
337	 * clock is stable. Furthermore, we must allow a 5ms
338	 * delay after the first set of register writes to
339	 * allow the DSP to boot before configuring it.
340	 */
341	usleep_range(5000, 10000);
342	send_cfg(rm, dsp_cfg_preboot, ARRAY_SIZE(dsp_cfg_preboot));
343	usleep_range(5000, 15000);
344	send_cfg(rm, tas5805m->dsp_cfg_data, tas5805m->dsp_cfg_len);
345
346	tas5805m->is_powered = true;
347	tas5805m_refresh(tas5805m);
348	mutex_unlock(&tas5805m->lock);
349}
350
351static int tas5805m_dac_event(struct snd_soc_dapm_widget *w,
352			      struct snd_kcontrol *kcontrol, int event)
353{
354	struct snd_soc_component *component = snd_soc_dapm_to_component(w->dapm);
355	struct tas5805m_priv *tas5805m =
356		snd_soc_component_get_drvdata(component);
357	struct regmap *rm = tas5805m->regmap;
358
359	if (event & SND_SOC_DAPM_PRE_PMD) {
360		unsigned int chan, global1, global2;
361
362		dev_dbg(component->dev, "DSP shutdown\n");
363		cancel_work_sync(&tas5805m->work);
364
365		mutex_lock(&tas5805m->lock);
366		if (tas5805m->is_powered) {
367			tas5805m->is_powered = false;
368
369			regmap_write(rm, REG_PAGE, 0x00);
370			regmap_write(rm, REG_BOOK, 0x00);
371
372			regmap_read(rm, REG_CHAN_FAULT, &chan);
373			regmap_read(rm, REG_GLOBAL_FAULT1, &global1);
374			regmap_read(rm, REG_GLOBAL_FAULT2, &global2);
375
376			dev_dbg(component->dev, "fault regs: CHAN=%02x, "
377				"GLOBAL1=%02x, GLOBAL2=%02x\n",
378				chan, global1, global2);
379
380			regmap_write(rm, REG_DEVICE_CTRL_2, DCTRL2_MODE_HIZ);
381		}
382		mutex_unlock(&tas5805m->lock);
383	}
384
385	return 0;
386}
387
388static const struct snd_soc_dapm_route tas5805m_audio_map[] = {
389	{ "DAC", NULL, "DAC IN" },
390	{ "OUT", NULL, "DAC" },
391};
392
393static const struct snd_soc_dapm_widget tas5805m_dapm_widgets[] = {
394	SND_SOC_DAPM_AIF_IN("DAC IN", "Playback", 0, SND_SOC_NOPM, 0, 0),
395	SND_SOC_DAPM_DAC_E("DAC", NULL, SND_SOC_NOPM, 0, 0,
396		tas5805m_dac_event, SND_SOC_DAPM_PRE_PMD),
397	SND_SOC_DAPM_OUTPUT("OUT")
398};
399
400static const struct snd_soc_component_driver soc_codec_dev_tas5805m = {
401	.controls		= tas5805m_snd_controls,
402	.num_controls		= ARRAY_SIZE(tas5805m_snd_controls),
403	.dapm_widgets		= tas5805m_dapm_widgets,
404	.num_dapm_widgets	= ARRAY_SIZE(tas5805m_dapm_widgets),
405	.dapm_routes		= tas5805m_audio_map,
406	.num_dapm_routes	= ARRAY_SIZE(tas5805m_audio_map),
407	.use_pmdown_time	= 1,
408	.endianness		= 1,
409};
410
411static int tas5805m_mute(struct snd_soc_dai *dai, int mute, int direction)
412{
413	struct snd_soc_component *component = dai->component;
414	struct tas5805m_priv *tas5805m =
415		snd_soc_component_get_drvdata(component);
416
417	mutex_lock(&tas5805m->lock);
418	dev_dbg(component->dev, "set mute=%d (is_powered=%d)\n",
419		mute, tas5805m->is_powered);
420
421	tas5805m->is_muted = mute;
422	if (tas5805m->is_powered)
423		tas5805m_refresh(tas5805m);
424	mutex_unlock(&tas5805m->lock);
425
426	return 0;
427}
428
429static const struct snd_soc_dai_ops tas5805m_dai_ops = {
430	.trigger		= tas5805m_trigger,
431	.mute_stream		= tas5805m_mute,
432	.no_capture_mute	= 1,
433};
434
435static struct snd_soc_dai_driver tas5805m_dai = {
436	.name		= "tas5805m-amplifier",
437	.playback	= {
438		.stream_name	= "Playback",
439		.channels_min	= 2,
440		.channels_max	= 2,
441		.rates		= SNDRV_PCM_RATE_48000,
442		.formats	= SNDRV_PCM_FMTBIT_S32_LE,
443	},
444	.ops		= &tas5805m_dai_ops,
445};
446
447static const struct regmap_config tas5805m_regmap = {
448	.reg_bits	= 8,
449	.val_bits	= 8,
450
451	/* We have quite a lot of multi-level bank switching and a
452	 * relatively small number of register writes between bank
453	 * switches.
454	 */
455	.cache_type	= REGCACHE_NONE,
456};
457
458static int tas5805m_i2c_probe(struct i2c_client *i2c)
459{
460	struct device *dev = &i2c->dev;
461	struct regmap *regmap;
462	struct tas5805m_priv *tas5805m;
463	char filename[128];
464	const char *config_name;
465	const struct firmware *fw;
466	int ret;
467
468	regmap = devm_regmap_init_i2c(i2c, &tas5805m_regmap);
469	if (IS_ERR(regmap)) {
470		ret = PTR_ERR(regmap);
471		dev_err(dev, "unable to allocate register map: %d\n", ret);
472		return ret;
473	}
474
475	tas5805m = devm_kzalloc(dev, sizeof(*tas5805m), GFP_KERNEL);
476	if (!tas5805m)
477		return -ENOMEM;
478
479	tas5805m->i2c = i2c;
480	tas5805m->pvdd = devm_regulator_get(dev, "pvdd");
481	if (IS_ERR(tas5805m->pvdd)) {
482		dev_err(dev, "failed to get pvdd supply: %ld\n",
483			PTR_ERR(tas5805m->pvdd));
484		return PTR_ERR(tas5805m->pvdd);
485	}
486
487	dev_set_drvdata(dev, tas5805m);
488	tas5805m->regmap = regmap;
489	tas5805m->gpio_pdn_n = devm_gpiod_get(dev, "pdn", GPIOD_OUT_LOW);
490	if (IS_ERR(tas5805m->gpio_pdn_n)) {
491		dev_err(dev, "error requesting PDN gpio: %ld\n",
492			PTR_ERR(tas5805m->gpio_pdn_n));
493		return PTR_ERR(tas5805m->gpio_pdn_n);
494	}
495
496	/* This configuration must be generated by PPC3. The file loaded
497	 * consists of a sequence of register writes, where bytes at
498	 * even indices are register addresses and those at odd indices
499	 * are register values.
500	 *
501	 * The fixed portion of PPC3's output prior to the 5ms delay
502	 * should be omitted.
503	 */
504	if (device_property_read_string(dev, "ti,dsp-config-name",
505					&config_name))
506		config_name = "default";
507
508	snprintf(filename, sizeof(filename), "tas5805m_dsp_%s.bin",
509		 config_name);
510	ret = request_firmware(&fw, filename, dev);
511	if (ret)
512		return ret;
513
514	if ((fw->size < 2) || (fw->size & 1)) {
515		dev_err(dev, "firmware is invalid\n");
516		release_firmware(fw);
517		return -EINVAL;
518	}
519
520	tas5805m->dsp_cfg_len = fw->size;
521	tas5805m->dsp_cfg_data = devm_kmemdup(dev, fw->data, fw->size, GFP_KERNEL);
522	if (!tas5805m->dsp_cfg_data) {
523		release_firmware(fw);
524		return -ENOMEM;
525	}
526
527	release_firmware(fw);
528
529	/* Do the first part of the power-on here, while we can expect
530	 * the I2S interface to be quiet. We must raise PDN# and then
531	 * wait 5ms before any I2S clock is sent, or else the internal
532	 * regulator apparently won't come on.
533	 *
534	 * Also, we must keep the device in power down for 100ms or so
535	 * after PVDD is applied, or else the ADR pin is sampled
536	 * incorrectly and the device comes up with an unpredictable I2C
537	 * address.
538	 */
539	tas5805m->vol[0] = TAS5805M_VOLUME_MIN;
540	tas5805m->vol[1] = TAS5805M_VOLUME_MIN;
541
542	ret = regulator_enable(tas5805m->pvdd);
543	if (ret < 0) {
544		dev_err(dev, "failed to enable pvdd: %d\n", ret);
545		return ret;
546	}
547
548	usleep_range(100000, 150000);
549	gpiod_set_value(tas5805m->gpio_pdn_n, 1);
550	usleep_range(10000, 15000);
551
552	INIT_WORK(&tas5805m->work, do_work);
553	mutex_init(&tas5805m->lock);
554
555	/* Don't register through devm. We need to be able to unregister
556	 * the component prior to deasserting PDN#
557	 */
558	ret = snd_soc_register_component(dev, &soc_codec_dev_tas5805m,
559					 &tas5805m_dai, 1);
560	if (ret < 0) {
561		dev_err(dev, "unable to register codec: %d\n", ret);
562		gpiod_set_value(tas5805m->gpio_pdn_n, 0);
563		regulator_disable(tas5805m->pvdd);
564		return ret;
565	}
566
567	return 0;
568}
569
570static void tas5805m_i2c_remove(struct i2c_client *i2c)
571{
572	struct device *dev = &i2c->dev;
573	struct tas5805m_priv *tas5805m = dev_get_drvdata(dev);
574
575	cancel_work_sync(&tas5805m->work);
576	snd_soc_unregister_component(dev);
577	gpiod_set_value(tas5805m->gpio_pdn_n, 0);
578	usleep_range(10000, 15000);
579	regulator_disable(tas5805m->pvdd);
580}
581
582static const struct i2c_device_id tas5805m_i2c_id[] = {
583	{ "tas5805m", },
584	{ }
585};
586MODULE_DEVICE_TABLE(i2c, tas5805m_i2c_id);
587
588#if IS_ENABLED(CONFIG_OF)
589static const struct of_device_id tas5805m_of_match[] = {
590	{ .compatible = "ti,tas5805m", },
591	{ }
592};
593MODULE_DEVICE_TABLE(of, tas5805m_of_match);
594#endif
595
596static struct i2c_driver tas5805m_i2c_driver = {
597	.probe		= tas5805m_i2c_probe,
598	.remove		= tas5805m_i2c_remove,
599	.id_table	= tas5805m_i2c_id,
600	.driver		= {
601		.name		= "tas5805m",
602		.of_match_table = of_match_ptr(tas5805m_of_match),
603	},
604};
605
606module_i2c_driver(tas5805m_i2c_driver);
607
608MODULE_AUTHOR("Andy Liu <andy-liu@ti.com>");
609MODULE_AUTHOR("Daniel Beer <daniel.beer@igorinstitute.com>");
610MODULE_DESCRIPTION("TAS5805M Audio Amplifier Driver");
611MODULE_LICENSE("GPL v2");
~/ Read-only file preview.