FILE
quartet.c
File preview with syntax highlighting.
linux-6.19.14/sound/pci/ice1712/quartet.c
1// SPDX-License-Identifier: GPL-2.0-or-later 2/* 3 * ALSA driver for ICEnsemble VT1724 (Envy24HT) 4 * 5 * Lowlevel functions for Infrasonic Quartet 6 * 7 * Copyright (c) 2009 Pavel Hofman <pavel.hofman@ivitera.com> 8 */ 9 10#include <linux/delay.h> 11#include <linux/interrupt.h> 12#include <linux/init.h> 13#include <linux/slab.h> 14#include <linux/string.h> 15#include <sound/core.h> 16#include <sound/tlv.h> 17#include <sound/info.h> 18 19#include "ice1712.h" 20#include "envy24ht.h" 21#include <sound/ak4113.h> 22#include "quartet.h" 23 24struct qtet_spec { 25 struct ak4113 *ak4113; 26 unsigned int scr; /* system control register */ 27 unsigned int mcr; /* monitoring control register */ 28 unsigned int cpld; /* cpld register */ 29}; 30 31struct qtet_kcontrol_private { 32 unsigned int bit; 33 void (*set_register)(struct snd_ice1712 *ice, unsigned int val); 34 unsigned int (*get_register)(struct snd_ice1712 *ice); 35 const char * const texts[2]; 36}; 37 38enum { 39 IN12_SEL = 0, 40 IN34_SEL, 41 AIN34_SEL, 42 COAX_OUT, 43 IN12_MON12, 44 IN12_MON34, 45 IN34_MON12, 46 IN34_MON34, 47 OUT12_MON34, 48 OUT34_MON12, 49}; 50 51static const char * const ext_clock_names[3] = {"IEC958 In", "Word Clock 1xFS", 52 "Word Clock 256xFS"}; 53 54/* chip address on I2C bus */ 55#define AK4113_ADDR 0x26 /* S/PDIF receiver */ 56 57/* chip address on SPI bus */ 58#define AK4620_ADDR 0x02 /* ADC/DAC */ 59 60 61/* 62 * GPIO pins 63 */ 64 65/* GPIO0 - O - DATA0, def. 0 */ 66#define GPIO_D0 (1<<0) 67/* GPIO1 - I/O - DATA1, Jack Detect Input0 (0:present, 1:missing), def. 1 */ 68#define GPIO_D1_JACKDTC0 (1<<1) 69/* GPIO2 - I/O - DATA2, Jack Detect Input1 (0:present, 1:missing), def. 1 */ 70#define GPIO_D2_JACKDTC1 (1<<2) 71/* GPIO3 - I/O - DATA3, def. 1 */ 72#define GPIO_D3 (1<<3) 73/* GPIO4 - I/O - DATA4, SPI CDTO, def. 1 */ 74#define GPIO_D4_SPI_CDTO (1<<4) 75/* GPIO5 - I/O - DATA5, SPI CCLK, def. 1 */ 76#define GPIO_D5_SPI_CCLK (1<<5) 77/* GPIO6 - I/O - DATA6, Cable Detect Input (0:detected, 1:not detected */ 78#define GPIO_D6_CD (1<<6) 79/* GPIO7 - I/O - DATA7, Device Detect Input (0:detected, 1:not detected */ 80#define GPIO_D7_DD (1<<7) 81/* GPIO8 - O - CPLD Chip Select, def. 1 */ 82#define GPIO_CPLD_CSN (1<<8) 83/* GPIO9 - O - CPLD register read/write (0:write, 1:read), def. 0 */ 84#define GPIO_CPLD_RW (1<<9) 85/* GPIO10 - O - SPI Chip Select for CODEC#0, def. 1 */ 86#define GPIO_SPI_CSN0 (1<<10) 87/* GPIO11 - O - SPI Chip Select for CODEC#1, def. 1 */ 88#define GPIO_SPI_CSN1 (1<<11) 89/* GPIO12 - O - Ex. Register Output Enable (0:enable, 1:disable), def. 1, 90 * init 0 */ 91#define GPIO_EX_GPIOE (1<<12) 92/* GPIO13 - O - Ex. Register0 Chip Select for System Control Register, 93 * def. 1 */ 94#define GPIO_SCR (1<<13) 95/* GPIO14 - O - Ex. Register1 Chip Select for Monitor Control Register, 96 * def. 1 */ 97#define GPIO_MCR (1<<14) 98 99#define GPIO_SPI_ALL (GPIO_D4_SPI_CDTO | GPIO_D5_SPI_CCLK |\ 100 GPIO_SPI_CSN0 | GPIO_SPI_CSN1) 101 102#define GPIO_DATA_MASK (GPIO_D0 | GPIO_D1_JACKDTC0 | \ 103 GPIO_D2_JACKDTC1 | GPIO_D3 | \ 104 GPIO_D4_SPI_CDTO | GPIO_D5_SPI_CCLK | \ 105 GPIO_D6_CD | GPIO_D7_DD) 106 107/* System Control Register GPIO_SCR data bits */ 108/* Mic/Line select relay (0:line, 1:mic) */ 109#define SCR_RELAY GPIO_D0 110/* Phantom power drive control (0:5V, 1:48V) */ 111#define SCR_PHP_V GPIO_D1_JACKDTC0 112/* H/W mute control (0:Normal, 1:Mute) */ 113#define SCR_MUTE GPIO_D2_JACKDTC1 114/* Phantom power control (0:Phantom on, 1:off) */ 115#define SCR_PHP GPIO_D3 116/* Analog input 1/2 Source Select */ 117#define SCR_AIN12_SEL0 GPIO_D4_SPI_CDTO 118#define SCR_AIN12_SEL1 GPIO_D5_SPI_CCLK 119/* Analog input 3/4 Source Select (0:line, 1:hi-z) */ 120#define SCR_AIN34_SEL GPIO_D6_CD 121/* Codec Power Down (0:power down, 1:normal) */ 122#define SCR_CODEC_PDN GPIO_D7_DD 123 124#define SCR_AIN12_LINE (0) 125#define SCR_AIN12_MIC (SCR_AIN12_SEL0) 126#define SCR_AIN12_LOWCUT (SCR_AIN12_SEL1 | SCR_AIN12_SEL0) 127 128/* Monitor Control Register GPIO_MCR data bits */ 129/* Input 1/2 to Monitor 1/2 (0:off, 1:on) */ 130#define MCR_IN12_MON12 GPIO_D0 131/* Input 1/2 to Monitor 3/4 (0:off, 1:on) */ 132#define MCR_IN12_MON34 GPIO_D1_JACKDTC0 133/* Input 3/4 to Monitor 1/2 (0:off, 1:on) */ 134#define MCR_IN34_MON12 GPIO_D2_JACKDTC1 135/* Input 3/4 to Monitor 3/4 (0:off, 1:on) */ 136#define MCR_IN34_MON34 GPIO_D3 137/* Output to Monitor 1/2 (0:off, 1:on) */ 138#define MCR_OUT34_MON12 GPIO_D4_SPI_CDTO 139/* Output to Monitor 3/4 (0:off, 1:on) */ 140#define MCR_OUT12_MON34 GPIO_D5_SPI_CCLK 141 142/* CPLD Register DATA bits */ 143/* Clock Rate Select */ 144#define CPLD_CKS0 GPIO_D0 145#define CPLD_CKS1 GPIO_D1_JACKDTC0 146#define CPLD_CKS2 GPIO_D2_JACKDTC1 147/* Sync Source Select (0:Internal, 1:External) */ 148#define CPLD_SYNC_SEL GPIO_D3 149/* Word Clock FS Select (0:FS, 1:256FS) */ 150#define CPLD_WORD_SEL GPIO_D4_SPI_CDTO 151/* Coaxial Output Source (IS-Link) (0:SPDIF, 1:I2S) */ 152#define CPLD_COAX_OUT GPIO_D5_SPI_CCLK 153/* Input 1/2 Source Select (0:Analog12, 1:An34) */ 154#define CPLD_IN12_SEL GPIO_D6_CD 155/* Input 3/4 Source Select (0:Analog34, 1:Digital In) */ 156#define CPLD_IN34_SEL GPIO_D7_DD 157 158/* internal clock (CPLD_SYNC_SEL = 0) options */ 159#define CPLD_CKS_44100HZ (0) 160#define CPLD_CKS_48000HZ (CPLD_CKS0) 161#define CPLD_CKS_88200HZ (CPLD_CKS1) 162#define CPLD_CKS_96000HZ (CPLD_CKS1 | CPLD_CKS0) 163#define CPLD_CKS_176400HZ (CPLD_CKS2) 164#define CPLD_CKS_192000HZ (CPLD_CKS2 | CPLD_CKS0) 165 166#define CPLD_CKS_MASK (CPLD_CKS0 | CPLD_CKS1 | CPLD_CKS2) 167 168/* external clock (CPLD_SYNC_SEL = 1) options */ 169/* external clock - SPDIF */ 170#define CPLD_EXT_SPDIF (0 | CPLD_SYNC_SEL) 171/* external clock - WordClock 1xfs */ 172#define CPLD_EXT_WORDCLOCK_1FS (CPLD_CKS1 | CPLD_SYNC_SEL) 173/* external clock - WordClock 256xfs */ 174#define CPLD_EXT_WORDCLOCK_256FS (CPLD_CKS1 | CPLD_WORD_SEL |\ 175 CPLD_SYNC_SEL) 176 177#define EXT_SPDIF_TYPE 0 178#define EXT_WORDCLOCK_1FS_TYPE 1 179#define EXT_WORDCLOCK_256FS_TYPE 2 180 181#define AK4620_DFS0 (1<<0) 182#define AK4620_DFS1 (1<<1) 183#define AK4620_CKS0 (1<<2) 184#define AK4620_CKS1 (1<<3) 185/* Clock and Format Control register */ 186#define AK4620_DFS_REG 0x02 187 188/* Deem and Volume Control register */ 189#define AK4620_DEEMVOL_REG 0x03 190#define AK4620_SMUTE (1<<7) 191 192/* 193 * Conversion from int value to its binary form. Used for debugging. 194 * The output buffer must be allocated prior to calling the function. 195 */ 196static char *get_binary(char *buffer, int value) 197{ 198 int i, j, pos; 199 pos = 0; 200 for (i = 0; i < 4; ++i) { 201 for (j = 0; j < 8; ++j) { 202 if (value & (1 << (31-(i*8 + j)))) 203 buffer[pos] = '1'; 204 else 205 buffer[pos] = '0'; 206 pos++; 207 } 208 if (i < 3) { 209 buffer[pos] = ' '; 210 pos++; 211 } 212 } 213 buffer[pos] = '\0'; 214 return buffer; 215} 216 217/* 218 * Initial setup of the conversion array GPIO <-> rate 219 */ 220static const unsigned int qtet_rates[] = { 221 44100, 48000, 88200, 222 96000, 176400, 192000, 223}; 224 225static const unsigned int cks_vals[] = { 226 CPLD_CKS_44100HZ, CPLD_CKS_48000HZ, CPLD_CKS_88200HZ, 227 CPLD_CKS_96000HZ, CPLD_CKS_176400HZ, CPLD_CKS_192000HZ, 228}; 229 230static const struct snd_pcm_hw_constraint_list qtet_rates_info = { 231 .count = ARRAY_SIZE(qtet_rates), 232 .list = qtet_rates, 233 .mask = 0, 234}; 235 236static void qtet_ak4113_write(void *private_data, unsigned char reg, 237 unsigned char val) 238{ 239 snd_vt1724_write_i2c((struct snd_ice1712 *)private_data, AK4113_ADDR, 240 reg, val); 241} 242 243static unsigned char qtet_ak4113_read(void *private_data, unsigned char reg) 244{ 245 return snd_vt1724_read_i2c((struct snd_ice1712 *)private_data, 246 AK4113_ADDR, reg); 247} 248 249 250/* 251 * AK4620 section 252 */ 253 254/* 255 * Write data to addr register of ak4620 256 */ 257static void qtet_akm_write(struct snd_akm4xxx *ak, int chip, 258 unsigned char addr, unsigned char data) 259{ 260 unsigned int tmp, orig_dir; 261 int idx; 262 unsigned int addrdata; 263 struct snd_ice1712 *ice = ak->private_data[0]; 264 265 if (snd_BUG_ON(chip < 0 || chip >= 4)) 266 return; 267 /*dev_dbg(ice->card->dev, "Writing to AK4620: chip=%d, addr=0x%x, 268 data=0x%x\n", chip, addr, data);*/ 269 orig_dir = ice->gpio.get_dir(ice); 270 ice->gpio.set_dir(ice, orig_dir | GPIO_SPI_ALL); 271 /* set mask - only SPI bits */ 272 ice->gpio.set_mask(ice, ~GPIO_SPI_ALL); 273 274 tmp = ice->gpio.get_data(ice); 275 /* high all */ 276 tmp |= GPIO_SPI_ALL; 277 ice->gpio.set_data(ice, tmp); 278 udelay(100); 279 /* drop chip select */ 280 if (chip) 281 /* CODEC 1 */ 282 tmp &= ~GPIO_SPI_CSN1; 283 else 284 tmp &= ~GPIO_SPI_CSN0; 285 ice->gpio.set_data(ice, tmp); 286 udelay(100); 287 288 /* build I2C address + data byte */ 289 addrdata = (AK4620_ADDR << 6) | 0x20 | (addr & 0x1f); 290 addrdata = (addrdata << 8) | data; 291 for (idx = 15; idx >= 0; idx--) { 292 /* drop clock */ 293 tmp &= ~GPIO_D5_SPI_CCLK; 294 ice->gpio.set_data(ice, tmp); 295 udelay(100); 296 /* set data */ 297 if (addrdata & (1 << idx)) 298 tmp |= GPIO_D4_SPI_CDTO; 299 else 300 tmp &= ~GPIO_D4_SPI_CDTO; 301 ice->gpio.set_data(ice, tmp); 302 udelay(100); 303 /* raise clock */ 304 tmp |= GPIO_D5_SPI_CCLK; 305 ice->gpio.set_data(ice, tmp); 306 udelay(100); 307 } 308 /* all back to 1 */ 309 tmp |= GPIO_SPI_ALL; 310 ice->gpio.set_data(ice, tmp); 311 udelay(100); 312 313 /* return all gpios to non-writable */ 314 ice->gpio.set_mask(ice, 0xffffff); 315 /* restore GPIOs direction */ 316 ice->gpio.set_dir(ice, orig_dir); 317} 318 319static void qtet_akm_set_regs(struct snd_akm4xxx *ak, unsigned char addr, 320 unsigned char mask, unsigned char value) 321{ 322 unsigned char tmp; 323 int chip; 324 for (chip = 0; chip < ak->num_chips; chip++) { 325 tmp = snd_akm4xxx_get(ak, chip, addr); 326 /* clear the bits */ 327 tmp &= ~mask; 328 /* set the new bits */ 329 tmp |= value; 330 snd_akm4xxx_write(ak, chip, addr, tmp); 331 } 332} 333 334/* 335 * change the rate of AK4620 336 */ 337static void qtet_akm_set_rate_val(struct snd_akm4xxx *ak, unsigned int rate) 338{ 339 unsigned char ak4620_dfs; 340 341 if (rate == 0) /* no hint - S/PDIF input is master or the new spdif 342 input rate undetected, simply return */ 343 return; 344 345 /* adjust DFS on codecs - see datasheet */ 346 if (rate > 108000) 347 ak4620_dfs = AK4620_DFS1 | AK4620_CKS1; 348 else if (rate > 54000) 349 ak4620_dfs = AK4620_DFS0 | AK4620_CKS0; 350 else 351 ak4620_dfs = 0; 352 353 /* set new value */ 354 qtet_akm_set_regs(ak, AK4620_DFS_REG, AK4620_DFS0 | AK4620_DFS1 | 355 AK4620_CKS0 | AK4620_CKS1, ak4620_dfs); 356} 357 358#define AK_CONTROL(xname, xch) { .name = xname, .num_channels = xch } 359 360#define PCM_12_PLAYBACK_VOLUME "PCM 1/2 Playback Volume" 361#define PCM_34_PLAYBACK_VOLUME "PCM 3/4 Playback Volume" 362#define PCM_12_CAPTURE_VOLUME "PCM 1/2 Capture Volume" 363#define PCM_34_CAPTURE_VOLUME "PCM 3/4 Capture Volume" 364 365static const struct snd_akm4xxx_dac_channel qtet_dac[] = { 366 AK_CONTROL(PCM_12_PLAYBACK_VOLUME, 2), 367 AK_CONTROL(PCM_34_PLAYBACK_VOLUME, 2), 368}; 369 370static const struct snd_akm4xxx_adc_channel qtet_adc[] = { 371 AK_CONTROL(PCM_12_CAPTURE_VOLUME, 2), 372 AK_CONTROL(PCM_34_CAPTURE_VOLUME, 2), 373}; 374 375static const struct snd_akm4xxx akm_qtet_dac = { 376 .type = SND_AK4620, 377 .num_dacs = 4, /* DAC1 - Output 12 378 */ 379 .num_adcs = 4, /* ADC1 - Input 12 380 */ 381 .ops = { 382 .write = qtet_akm_write, 383 .set_rate_val = qtet_akm_set_rate_val, 384 }, 385 .dac_info = qtet_dac, 386 .adc_info = qtet_adc, 387}; 388 389/* Communication routines with the CPLD */ 390 391 392/* Writes data to external register reg, both reg and data are 393 * GPIO representations */ 394static void reg_write(struct snd_ice1712 *ice, unsigned int reg, 395 unsigned int data) 396{ 397 unsigned int tmp; 398 399 guard(mutex)(&ice->gpio_mutex); 400 /* set direction of used GPIOs*/ 401 /* all outputs */ 402 tmp = 0x00ffff; 403 ice->gpio.set_dir(ice, tmp); 404 /* mask - writable bits */ 405 ice->gpio.set_mask(ice, ~(tmp)); 406 /* write the data */ 407 tmp = ice->gpio.get_data(ice); 408 tmp &= ~GPIO_DATA_MASK; 409 tmp |= data; 410 ice->gpio.set_data(ice, tmp); 411 udelay(100); 412 /* drop output enable */ 413 tmp &= ~GPIO_EX_GPIOE; 414 ice->gpio.set_data(ice, tmp); 415 udelay(100); 416 /* drop the register gpio */ 417 tmp &= ~reg; 418 ice->gpio.set_data(ice, tmp); 419 udelay(100); 420 /* raise the register GPIO */ 421 tmp |= reg; 422 ice->gpio.set_data(ice, tmp); 423 udelay(100); 424 425 /* raise all data gpios */ 426 tmp |= GPIO_DATA_MASK; 427 ice->gpio.set_data(ice, tmp); 428 /* mask - immutable bits */ 429 ice->gpio.set_mask(ice, 0xffffff); 430 /* outputs only 8-15 */ 431 ice->gpio.set_dir(ice, 0x00ff00); 432} 433 434static unsigned int get_scr(struct snd_ice1712 *ice) 435{ 436 struct qtet_spec *spec = ice->spec; 437 return spec->scr; 438} 439 440static unsigned int get_mcr(struct snd_ice1712 *ice) 441{ 442 struct qtet_spec *spec = ice->spec; 443 return spec->mcr; 444} 445 446static unsigned int get_cpld(struct snd_ice1712 *ice) 447{ 448 struct qtet_spec *spec = ice->spec; 449 return spec->cpld; 450} 451 452static void set_scr(struct snd_ice1712 *ice, unsigned int val) 453{ 454 struct qtet_spec *spec = ice->spec; 455 reg_write(ice, GPIO_SCR, val); 456 spec->scr = val; 457} 458 459static void set_mcr(struct snd_ice1712 *ice, unsigned int val) 460{ 461 struct qtet_spec *spec = ice->spec; 462 reg_write(ice, GPIO_MCR, val); 463 spec->mcr = val; 464} 465 466static void set_cpld(struct snd_ice1712 *ice, unsigned int val) 467{ 468 struct qtet_spec *spec = ice->spec; 469 reg_write(ice, GPIO_CPLD_CSN, val); 470 spec->cpld = val; 471} 472 473static void proc_regs_read(struct snd_info_entry *entry, 474 struct snd_info_buffer *buffer) 475{ 476 struct snd_ice1712 *ice = entry->private_data; 477 char bin_buffer[36]; 478 479 snd_iprintf(buffer, "SCR: %s\n", get_binary(bin_buffer, 480 get_scr(ice))); 481 snd_iprintf(buffer, "MCR: %s\n", get_binary(bin_buffer, 482 get_mcr(ice))); 483 snd_iprintf(buffer, "CPLD: %s\n", get_binary(bin_buffer, 484 get_cpld(ice))); 485} 486 487static void proc_init(struct snd_ice1712 *ice) 488{ 489 snd_card_ro_proc_new(ice->card, "quartet", ice, proc_regs_read); 490} 491 492static int qtet_mute_get(struct snd_kcontrol *kcontrol, 493 struct snd_ctl_elem_value *ucontrol) 494{ 495 struct snd_ice1712 *ice = snd_kcontrol_chip(kcontrol); 496 unsigned int val; 497 val = get_scr(ice) & SCR_MUTE; 498 ucontrol->value.integer.value[0] = (val) ? 0 : 1; 499 return 0; 500} 501 502static int qtet_mute_put(struct snd_kcontrol *kcontrol, 503 struct snd_ctl_elem_value *ucontrol) 504{ 505 struct snd_ice1712 *ice = snd_kcontrol_chip(kcontrol); 506 unsigned int old, new, smute; 507 old = get_scr(ice) & SCR_MUTE; 508 if (ucontrol->value.integer.value[0]) { 509 /* unmute */ 510 new = 0; 511 /* un-smuting DAC */ 512 smute = 0; 513 } else { 514 /* mute */ 515 new = SCR_MUTE; 516 /* smuting DAC */ 517 smute = AK4620_SMUTE; 518 } 519 if (old != new) { 520 struct snd_akm4xxx *ak = ice->akm; 521 set_scr(ice, (get_scr(ice) & ~SCR_MUTE) | new); 522 /* set smute */ 523 qtet_akm_set_regs(ak, AK4620_DEEMVOL_REG, AK4620_SMUTE, smute); 524 return 1; 525 } 526 /* no change */ 527 return 0; 528} 529 530static int qtet_ain12_enum_info(struct snd_kcontrol *kcontrol, 531 struct snd_ctl_elem_info *uinfo) 532{ 533 static const char * const texts[3] = 534 {"Line In 1/2", "Mic", "Mic + Low-cut"}; 535 return snd_ctl_enum_info(uinfo, 1, ARRAY_SIZE(texts), texts); 536} 537 538static int qtet_ain12_sw_get(struct snd_kcontrol *kcontrol, 539 struct snd_ctl_elem_value *ucontrol) 540{ 541 struct snd_ice1712 *ice = snd_kcontrol_chip(kcontrol); 542 unsigned int val, result; 543 val = get_scr(ice) & (SCR_AIN12_SEL1 | SCR_AIN12_SEL0); 544 switch (val) { 545 case SCR_AIN12_LINE: 546 result = 0; 547 break; 548 case SCR_AIN12_MIC: 549 result = 1; 550 break; 551 case SCR_AIN12_LOWCUT: 552 result = 2; 553 break; 554 default: 555 /* BUG - no other combinations allowed */ 556 snd_BUG(); 557 result = 0; 558 } 559 ucontrol->value.integer.value[0] = result; 560 return 0; 561} 562 563static int qtet_ain12_sw_put(struct snd_kcontrol *kcontrol, 564 struct snd_ctl_elem_value *ucontrol) 565{ 566 struct snd_ice1712 *ice = snd_kcontrol_chip(kcontrol); 567 unsigned int old, new, tmp, masked_old; 568 old = get_scr(ice); 569 masked_old = old & (SCR_AIN12_SEL1 | SCR_AIN12_SEL0); 570 tmp = ucontrol->value.integer.value[0]; 571 if (tmp == 2) 572 tmp = 3; /* binary 10 is not supported */ 573 tmp <<= 4; /* shifting to SCR_AIN12_SEL0 */ 574 if (tmp != masked_old) { 575 /* change requested */ 576 switch (tmp) { 577 case SCR_AIN12_LINE: 578 new = old & ~(SCR_AIN12_SEL1 | SCR_AIN12_SEL0); 579 set_scr(ice, new); 580 /* turn off relay */ 581 new &= ~SCR_RELAY; 582 set_scr(ice, new); 583 break; 584 case SCR_AIN12_MIC: 585 /* turn on relay */ 586 new = old | SCR_RELAY; 587 set_scr(ice, new); 588 new = (new & ~SCR_AIN12_SEL1) | SCR_AIN12_SEL0; 589 set_scr(ice, new); 590 break; 591 case SCR_AIN12_LOWCUT: 592 /* turn on relay */ 593 new = old | SCR_RELAY; 594 set_scr(ice, new); 595 new |= SCR_AIN12_SEL1 | SCR_AIN12_SEL0; 596 set_scr(ice, new); 597 break; 598 default: 599 snd_BUG(); 600 } 601 return 1; 602 } 603 /* no change */ 604 return 0; 605} 606 607static int qtet_php_get(struct snd_kcontrol *kcontrol, 608 struct snd_ctl_elem_value *ucontrol) 609{ 610 struct snd_ice1712 *ice = snd_kcontrol_chip(kcontrol); 611 unsigned int val; 612 /* if phantom voltage =48V, phantom on */ 613 val = get_scr(ice) & SCR_PHP_V; 614 ucontrol->value.integer.value[0] = val ? 1 : 0; 615 return 0; 616} 617 618static int qtet_php_put(struct snd_kcontrol *kcontrol, 619 struct snd_ctl_elem_value *ucontrol) 620{ 621 struct snd_ice1712 *ice = snd_kcontrol_chip(kcontrol); 622 unsigned int old, new; 623 old = new = get_scr(ice); 624 if (ucontrol->value.integer.value[0] /* phantom on requested */ 625 && (~old & SCR_PHP_V)) /* 0 = voltage 5V */ { 626 /* is off, turn on */ 627 /* turn voltage on first, = 1 */ 628 new = old | SCR_PHP_V; 629 set_scr(ice, new); 630 /* turn phantom on, = 0 */ 631 new &= ~SCR_PHP; 632 set_scr(ice, new); 633 } else if (!ucontrol->value.integer.value[0] && (old & SCR_PHP_V)) { 634 /* phantom off requested and 1 = voltage 48V */ 635 /* is on, turn off */ 636 /* turn voltage off first, = 0 */ 637 new = old & ~SCR_PHP_V; 638 set_scr(ice, new); 639 /* turn phantom off, = 1 */ 640 new |= SCR_PHP; 641 set_scr(ice, new); 642 } 643 if (old != new) 644 return 1; 645 /* no change */ 646 return 0; 647} 648 649#define PRIV_SW(xid, xbit, xreg) [xid] = {.bit = xbit,\ 650 .set_register = set_##xreg,\ 651 .get_register = get_##xreg, } 652 653 654#define PRIV_ENUM2(xid, xbit, xreg, xtext1, xtext2) [xid] = {.bit = xbit,\ 655 .set_register = set_##xreg,\ 656 .get_register = get_##xreg,\ 657 .texts = {xtext1, xtext2} } 658 659static const struct qtet_kcontrol_private qtet_privates[] = { 660 PRIV_ENUM2(IN12_SEL, CPLD_IN12_SEL, cpld, "An In 1/2", "An In 3/4"), 661 PRIV_ENUM2(IN34_SEL, CPLD_IN34_SEL, cpld, "An In 3/4", "IEC958 In"), 662 PRIV_ENUM2(AIN34_SEL, SCR_AIN34_SEL, scr, "Line In 3/4", "Hi-Z"), 663 PRIV_ENUM2(COAX_OUT, CPLD_COAX_OUT, cpld, "IEC958", "I2S"), 664 PRIV_SW(IN12_MON12, MCR_IN12_MON12, mcr), 665 PRIV_SW(IN12_MON34, MCR_IN12_MON34, mcr), 666 PRIV_SW(IN34_MON12, MCR_IN34_MON12, mcr), 667 PRIV_SW(IN34_MON34, MCR_IN34_MON34, mcr), 668 PRIV_SW(OUT12_MON34, MCR_OUT12_MON34, mcr), 669 PRIV_SW(OUT34_MON12, MCR_OUT34_MON12, mcr), 670}; 671 672static int qtet_enum_info(struct snd_kcontrol *kcontrol, 673 struct snd_ctl_elem_info *uinfo) 674{ 675 struct qtet_kcontrol_private private = 676 qtet_privates[kcontrol->private_value]; 677 return snd_ctl_enum_info(uinfo, 1, ARRAY_SIZE(private.texts), 678 private.texts); 679} 680 681static int qtet_sw_get(struct snd_kcontrol *kcontrol, 682 struct snd_ctl_elem_value *ucontrol) 683{ 684 struct qtet_kcontrol_private private = 685 qtet_privates[kcontrol->private_value]; 686 struct snd_ice1712 *ice = snd_kcontrol_chip(kcontrol); 687 ucontrol->value.integer.value[0] = 688 (private.get_register(ice) & private.bit) ? 1 : 0; 689 return 0; 690} 691 692static int qtet_sw_put(struct snd_kcontrol *kcontrol, 693 struct snd_ctl_elem_value *ucontrol) 694{ 695 struct qtet_kcontrol_private private = 696 qtet_privates[kcontrol->private_value]; 697 struct snd_ice1712 *ice = snd_kcontrol_chip(kcontrol); 698 unsigned int old, new; 699 old = private.get_register(ice); 700 if (ucontrol->value.integer.value[0]) 701 new = old | private.bit; 702 else 703 new = old & ~private.bit; 704 if (old != new) { 705 private.set_register(ice, new); 706 return 1; 707 } 708 /* no change */ 709 return 0; 710} 711 712#define qtet_sw_info snd_ctl_boolean_mono_info 713 714#define QTET_CONTROL(xname, xtype, xpriv) \ 715 {.iface = SNDRV_CTL_ELEM_IFACE_MIXER,\ 716 .name = xname,\ 717 .info = qtet_##xtype##_info,\ 718 .get = qtet_sw_get,\ 719 .put = qtet_sw_put,\ 720 .private_value = xpriv } 721 722static const struct snd_kcontrol_new qtet_controls[] = { 723 { 724 .iface = SNDRV_CTL_ELEM_IFACE_MIXER, 725 .name = "Master Playback Switch", 726 .info = qtet_sw_info, 727 .get = qtet_mute_get, 728 .put = qtet_mute_put, 729 .private_value = 0 730 }, 731 { 732 .iface = SNDRV_CTL_ELEM_IFACE_MIXER, 733 .name = "Phantom Power", 734 .info = qtet_sw_info, 735 .get = qtet_php_get, 736 .put = qtet_php_put, 737 .private_value = 0 738 }, 739 { 740 .iface = SNDRV_CTL_ELEM_IFACE_MIXER, 741 .name = "Analog In 1/2 Capture Switch", 742 .info = qtet_ain12_enum_info, 743 .get = qtet_ain12_sw_get, 744 .put = qtet_ain12_sw_put, 745 .private_value = 0 746 }, 747 QTET_CONTROL("Analog In 3/4 Capture Switch", enum, AIN34_SEL), 748 QTET_CONTROL("PCM In 1/2 Capture Switch", enum, IN12_SEL), 749 QTET_CONTROL("PCM In 3/4 Capture Switch", enum, IN34_SEL), 750 QTET_CONTROL("Coax Output Source", enum, COAX_OUT), 751 QTET_CONTROL("Analog In 1/2 to Monitor 1/2", sw, IN12_MON12), 752 QTET_CONTROL("Analog In 1/2 to Monitor 3/4", sw, IN12_MON34), 753 QTET_CONTROL("Analog In 3/4 to Monitor 1/2", sw, IN34_MON12), 754 QTET_CONTROL("Analog In 3/4 to Monitor 3/4", sw, IN34_MON34), 755 QTET_CONTROL("Output 1/2 to Monitor 3/4", sw, OUT12_MON34), 756 QTET_CONTROL("Output 3/4 to Monitor 1/2", sw, OUT34_MON12), 757}; 758 759static const char * const follower_vols[] = { 760 PCM_12_PLAYBACK_VOLUME, 761 PCM_34_PLAYBACK_VOLUME, 762 NULL 763}; 764 765static 766DECLARE_TLV_DB_SCALE(qtet_master_db_scale, -6350, 50, 1); 767 768static int qtet_add_controls(struct snd_ice1712 *ice) 769{ 770 struct qtet_spec *spec = ice->spec; 771 int err, i; 772 struct snd_kcontrol *vmaster; 773 err = snd_ice1712_akm4xxx_build_controls(ice); 774 if (err < 0) 775 return err; 776 for (i = 0; i < ARRAY_SIZE(qtet_controls); i++) { 777 err = snd_ctl_add(ice->card, 778 snd_ctl_new1(&qtet_controls[i], ice)); 779 if (err < 0) 780 return err; 781 } 782 783 /* Create virtual master control */ 784 vmaster = snd_ctl_make_virtual_master("Master Playback Volume", 785 qtet_master_db_scale); 786 if (!vmaster) 787 return -ENOMEM; 788 err = snd_ctl_add(ice->card, vmaster); 789 if (err < 0) 790 return err; 791 err = snd_ctl_add_followers(ice->card, vmaster, follower_vols); 792 if (err < 0) 793 return err; 794 /* only capture SPDIF over AK4113 */ 795 return snd_ak4113_build(spec->ak4113, 796 ice->pcm->streams[SNDRV_PCM_STREAM_CAPTURE].substream); 797} 798 799static inline int qtet_is_spdif_master(struct snd_ice1712 *ice) 800{ 801 /* CPLD_SYNC_SEL: 0 = internal, 1 = external (i.e. spdif master) */ 802 return (get_cpld(ice) & CPLD_SYNC_SEL) ? 1 : 0; 803} 804 805static unsigned int qtet_get_rate(struct snd_ice1712 *ice) 806{ 807 int i; 808 unsigned char result; 809 810 result = get_cpld(ice) & CPLD_CKS_MASK; 811 for (i = 0; i < ARRAY_SIZE(cks_vals); i++) 812 if (cks_vals[i] == result) 813 return qtet_rates[i]; 814 return 0; 815} 816 817static int get_cks_val(int rate) 818{ 819 int i; 820 for (i = 0; i < ARRAY_SIZE(qtet_rates); i++) 821 if (qtet_rates[i] == rate) 822 return cks_vals[i]; 823 return 0; 824} 825 826/* setting new rate */ 827static void qtet_set_rate(struct snd_ice1712 *ice, unsigned int rate) 828{ 829 unsigned int new; 830 unsigned char val; 831 /* switching ice1724 to external clock - supplied by ext. circuits */ 832 val = inb(ICEMT1724(ice, RATE)); 833 outb(val | VT1724_SPDIF_MASTER, ICEMT1724(ice, RATE)); 834 835 new = (get_cpld(ice) & ~CPLD_CKS_MASK) | get_cks_val(rate); 836 /* switch to internal clock, drop CPLD_SYNC_SEL */ 837 new &= ~CPLD_SYNC_SEL; 838 /* dev_dbg(ice->card->dev, "QT - set_rate: old %x, new %x\n", 839 get_cpld(ice), new); */ 840 set_cpld(ice, new); 841} 842 843static inline unsigned char qtet_set_mclk(struct snd_ice1712 *ice, 844 unsigned int rate) 845{ 846 /* no change in master clock */ 847 return 0; 848} 849 850/* setting clock to external - SPDIF */ 851static int qtet_set_spdif_clock(struct snd_ice1712 *ice, int type) 852{ 853 unsigned int old, new; 854 855 old = new = get_cpld(ice); 856 new &= ~(CPLD_CKS_MASK | CPLD_WORD_SEL); 857 switch (type) { 858 case EXT_SPDIF_TYPE: 859 new |= CPLD_EXT_SPDIF; 860 break; 861 case EXT_WORDCLOCK_1FS_TYPE: 862 new |= CPLD_EXT_WORDCLOCK_1FS; 863 break; 864 case EXT_WORDCLOCK_256FS_TYPE: 865 new |= CPLD_EXT_WORDCLOCK_256FS; 866 break; 867 default: 868 snd_BUG(); 869 } 870 if (old != new) { 871 set_cpld(ice, new); 872 /* changed */ 873 return 1; 874 } 875 return 0; 876} 877 878static int qtet_get_spdif_master_type(struct snd_ice1712 *ice) 879{ 880 unsigned int val; 881 int result; 882 val = get_cpld(ice); 883 /* checking only rate/clock-related bits */ 884 val &= (CPLD_CKS_MASK | CPLD_WORD_SEL | CPLD_SYNC_SEL); 885 if (!(val & CPLD_SYNC_SEL)) { 886 /* switched to internal clock, is not any external type */ 887 result = -1; 888 } else { 889 switch (val) { 890 case (CPLD_EXT_SPDIF): 891 result = EXT_SPDIF_TYPE; 892 break; 893 case (CPLD_EXT_WORDCLOCK_1FS): 894 result = EXT_WORDCLOCK_1FS_TYPE; 895 break; 896 case (CPLD_EXT_WORDCLOCK_256FS): 897 result = EXT_WORDCLOCK_256FS_TYPE; 898 break; 899 default: 900 /* undefined combination of external clock setup */ 901 snd_BUG(); 902 result = 0; 903 } 904 } 905 return result; 906} 907 908/* Called when ak4113 detects change in the input SPDIF stream */ 909static void qtet_ak4113_change(struct ak4113 *ak4113, unsigned char c0, 910 unsigned char c1) 911{ 912 struct snd_ice1712 *ice = ak4113->change_callback_private; 913 int rate; 914 if ((qtet_get_spdif_master_type(ice) == EXT_SPDIF_TYPE) && 915 c1) { 916 /* only for SPDIF master mode, rate was changed */ 917 rate = snd_ak4113_external_rate(ak4113); 918 /* dev_dbg(ice->card->dev, "ak4113 - input rate changed to %d\n", 919 rate); */ 920 qtet_akm_set_rate_val(ice->akm, rate); 921 } 922} 923 924/* 925 * If clock slaved to SPDIF-IN, setting runtime rate 926 * to the detected external rate 927 */ 928static void qtet_spdif_in_open(struct snd_ice1712 *ice, 929 struct snd_pcm_substream *substream) 930{ 931 struct qtet_spec *spec = ice->spec; 932 struct snd_pcm_runtime *runtime = substream->runtime; 933 int rate; 934 935 if (qtet_get_spdif_master_type(ice) != EXT_SPDIF_TYPE) 936 /* not external SPDIF, no rate limitation */ 937 return; 938 /* only external SPDIF can detect incoming sample rate */ 939 rate = snd_ak4113_external_rate(spec->ak4113); 940 if (rate >= runtime->hw.rate_min && rate <= runtime->hw.rate_max) { 941 runtime->hw.rate_min = rate; 942 runtime->hw.rate_max = rate; 943 } 944} 945 946/* 947 * initialize the chip 948 */ 949static int qtet_init(struct snd_ice1712 *ice) 950{ 951 static const unsigned char ak4113_init_vals[] = { 952 /* AK4113_REG_PWRDN */ AK4113_RST | AK4113_PWN | 953 AK4113_OCKS0 | AK4113_OCKS1, 954 /* AK4113_REQ_FORMAT */ AK4113_DIF_I24I2S | AK4113_VTX | 955 AK4113_DEM_OFF | AK4113_DEAU, 956 /* AK4113_REG_IO0 */ AK4113_OPS2 | AK4113_TXE | 957 AK4113_XTL_24_576M, 958 /* AK4113_REG_IO1 */ AK4113_EFH_1024LRCLK | AK4113_IPS(0), 959 /* AK4113_REG_INT0_MASK */ 0, 960 /* AK4113_REG_INT1_MASK */ 0, 961 /* AK4113_REG_DATDTS */ 0, 962 }; 963 int err; 964 struct qtet_spec *spec; 965 struct snd_akm4xxx *ak; 966 unsigned char val; 967 968 /* switching ice1724 to external clock - supplied by ext. circuits */ 969 val = inb(ICEMT1724(ice, RATE)); 970 outb(val | VT1724_SPDIF_MASTER, ICEMT1724(ice, RATE)); 971 972 spec = kzalloc(sizeof(*spec), GFP_KERNEL); 973 if (!spec) 974 return -ENOMEM; 975 /* qtet is clocked by Xilinx array */ 976 ice->hw_rates = &qtet_rates_info; 977 ice->is_spdif_master = qtet_is_spdif_master; 978 ice->get_rate = qtet_get_rate; 979 ice->set_rate = qtet_set_rate; 980 ice->set_mclk = qtet_set_mclk; 981 ice->set_spdif_clock = qtet_set_spdif_clock; 982 ice->get_spdif_master_type = qtet_get_spdif_master_type; 983 ice->ext_clock_names = ext_clock_names; 984 ice->ext_clock_count = ARRAY_SIZE(ext_clock_names); 985 /* since Qtet can detect correct SPDIF-in rate, all streams can be 986 * limited to this specific rate */ 987 ice->spdif.ops.open = ice->pro_open = qtet_spdif_in_open; 988 ice->spec = spec; 989 990 /* Mute Off */ 991 /* SCR Initialize*/ 992 /* keep codec power down first */ 993 set_scr(ice, SCR_PHP); 994 udelay(1); 995 /* codec power up */ 996 set_scr(ice, SCR_PHP | SCR_CODEC_PDN); 997 998 /* MCR Initialize */ 999 set_mcr(ice, 0); 1000 1001 /* CPLD Initialize */ 1002 set_cpld(ice, 0); 1003 1004 1005 ice->num_total_dacs = 2; 1006 ice->num_total_adcs = 2; 1007 1008 ice->akm = kcalloc(2, sizeof(struct snd_akm4xxx), GFP_KERNEL); 1009 ak = ice->akm; 1010 if (!ak) 1011 return -ENOMEM; 1012 /* only one codec with two chips */ 1013 ice->akm_codecs = 1; 1014 err = snd_ice1712_akm4xxx_init(ak, &akm_qtet_dac, NULL, ice); 1015 if (err < 0) 1016 return err; 1017 err = snd_ak4113_create(ice->card, 1018 qtet_ak4113_read, 1019 qtet_ak4113_write, 1020 ak4113_init_vals, 1021 ice, &spec->ak4113); 1022 if (err < 0) 1023 return err; 1024 /* callback for codecs rate setting */ 1025 spec->ak4113->change_callback = qtet_ak4113_change; 1026 spec->ak4113->change_callback_private = ice; 1027 /* AK41143 in Quartet can detect external rate correctly 1028 * (i.e. check_flags = 0) */ 1029 spec->ak4113->check_flags = 0; 1030 1031 proc_init(ice); 1032 1033 qtet_set_rate(ice, 44100); 1034 return 0; 1035} 1036 1037static const unsigned char qtet_eeprom[] = { 1038 [ICE_EEP2_SYSCONF] = 0x28, /* clock 256(24MHz), mpu401, 1xADC, 1039 1xDACs, SPDIF in */ 1040 [ICE_EEP2_ACLINK] = 0x80, /* I2S */ 1041 [ICE_EEP2_I2S] = 0x78, /* 96k, 24bit, 192k */ 1042 [ICE_EEP2_SPDIF] = 0xc3, /* out-en, out-int, in, out-ext */ 1043 [ICE_EEP2_GPIO_DIR] = 0x00, /* 0-7 inputs, switched to output 1044 only during output operations */ 1045 [ICE_EEP2_GPIO_DIR1] = 0xff, /* 8-15 outputs */ 1046 [ICE_EEP2_GPIO_DIR2] = 0x00, 1047 [ICE_EEP2_GPIO_MASK] = 0xff, /* changed only for OUT operations */ 1048 [ICE_EEP2_GPIO_MASK1] = 0x00, 1049 [ICE_EEP2_GPIO_MASK2] = 0xff, 1050 1051 [ICE_EEP2_GPIO_STATE] = 0x00, /* inputs */ 1052 [ICE_EEP2_GPIO_STATE1] = 0x7d, /* all 1, but GPIO_CPLD_RW 1053 and GPIO15 always zero */ 1054 [ICE_EEP2_GPIO_STATE2] = 0x00, /* inputs */ 1055}; 1056 1057/* entry point */ 1058struct snd_ice1712_card_info snd_vt1724_qtet_cards[] = { 1059 { 1060 .subvendor = VT1724_SUBDEVICE_QTET, 1061 .name = "Infrasonic Quartet", 1062 .model = "quartet", 1063 .chip_init = qtet_init, 1064 .build_controls = qtet_add_controls, 1065 .eeprom_size = sizeof(qtet_eeprom), 1066 .eeprom_data = qtet_eeprom, 1067 }, 1068 { } /* terminator */ 1069};
~/
Read-only file preview.