gina24.c

  1// SPDX-License-Identifier: GPL-2.0-only
  2/*
  3 *  ALSA driver for Echoaudio soundcards.
  4 *  Copyright (C) 2003-2004 Giuliano Pochini <pochini@shiny.it>
  5 */
  6
  7#define ECHO24_FAMILY
  8#define ECHOCARD_GINA24
  9#define ECHOCARD_NAME "Gina24"
 10#define ECHOCARD_HAS_MONITOR
 11#define ECHOCARD_HAS_ASIC
 12#define ECHOCARD_HAS_INPUT_NOMINAL_LEVEL
 13#define ECHOCARD_HAS_OUTPUT_NOMINAL_LEVEL
 14#define ECHOCARD_HAS_SUPER_INTERLEAVE
 15#define ECHOCARD_HAS_DIGITAL_IO
 16#define ECHOCARD_HAS_DIGITAL_IN_AUTOMUTE
 17#define ECHOCARD_HAS_DIGITAL_MODE_SWITCH
 18#define ECHOCARD_HAS_EXTERNAL_CLOCK
 19#define ECHOCARD_HAS_ADAT	6
 20#define ECHOCARD_HAS_STEREO_BIG_ENDIAN32
 21
 22/* Pipe indexes */
 23#define PX_ANALOG_OUT	0	/* 8 */
 24#define PX_DIGITAL_OUT	8	/* 8 */
 25#define PX_ANALOG_IN	16	/* 2 */
 26#define PX_DIGITAL_IN	18	/* 8 */
 27#define PX_NUM		26
 28
 29/* Bus indexes */
 30#define BX_ANALOG_OUT	0	/* 8 */
 31#define BX_DIGITAL_OUT	8	/* 8 */
 32#define BX_ANALOG_IN	16	/* 2 */
 33#define BX_DIGITAL_IN	18	/* 8 */
 34#define BX_NUM		26
 35
 36
 37#include <linux/delay.h>
 38#include <linux/init.h>
 39#include <linux/interrupt.h>
 40#include <linux/pci.h>
 41#include <linux/module.h>
 42#include <linux/firmware.h>
 43#include <linux/slab.h>
 44#include <linux/io.h>
 45#include <sound/core.h>
 46#include <sound/info.h>
 47#include <sound/control.h>
 48#include <sound/tlv.h>
 49#include <sound/pcm.h>
 50#include <sound/pcm_params.h>
 51#include <sound/asoundef.h>
 52#include <sound/initval.h>
 53#include <linux/atomic.h>
 54#include "echoaudio.h"
 55
 56MODULE_FIRMWARE("ea/loader_dsp.fw");
 57MODULE_FIRMWARE("ea/gina24_301_dsp.fw");
 58MODULE_FIRMWARE("ea/gina24_361_dsp.fw");
 59MODULE_FIRMWARE("ea/gina24_301_asic.fw");
 60MODULE_FIRMWARE("ea/gina24_361_asic.fw");
 61
 62#define FW_361_LOADER		0
 63#define FW_GINA24_301_DSP	1
 64#define FW_GINA24_361_DSP	2
 65#define FW_GINA24_301_ASIC	3
 66#define FW_GINA24_361_ASIC	4
 67
 68static const struct firmware card_fw[] = {
 69	{0, "loader_dsp.fw"},
 70	{0, "gina24_301_dsp.fw"},
 71	{0, "gina24_361_dsp.fw"},
 72	{0, "gina24_301_asic.fw"},
 73	{0, "gina24_361_asic.fw"}
 74};
 75
 76static const struct pci_device_id snd_echo_ids[] = {
 77	{0x1057, 0x1801, 0xECC0, 0x0050, 0, 0, 0},	/* DSP 56301 Gina24 rev.0 */
 78	{0x1057, 0x1801, 0xECC0, 0x0051, 0, 0, 0},	/* DSP 56301 Gina24 rev.1 */
 79	{0x1057, 0x3410, 0xECC0, 0x0050, 0, 0, 0},	/* DSP 56361 Gina24 rev.0 */
 80	{0x1057, 0x3410, 0xECC0, 0x0051, 0, 0, 0},	/* DSP 56361 Gina24 rev.1 */
 81	{0,}
 82};
 83
 84static const struct snd_pcm_hardware pcm_hardware_skel = {
 85	.info = SNDRV_PCM_INFO_MMAP |
 86		SNDRV_PCM_INFO_INTERLEAVED |
 87		SNDRV_PCM_INFO_BLOCK_TRANSFER |
 88		SNDRV_PCM_INFO_MMAP_VALID |
 89		SNDRV_PCM_INFO_PAUSE |
 90		SNDRV_PCM_INFO_SYNC_START,
 91	.formats =	SNDRV_PCM_FMTBIT_U8 |
 92			SNDRV_PCM_FMTBIT_S16_LE |
 93			SNDRV_PCM_FMTBIT_S24_3LE |
 94			SNDRV_PCM_FMTBIT_S32_LE |
 95			SNDRV_PCM_FMTBIT_S32_BE,
 96	.rates = 	SNDRV_PCM_RATE_8000_48000 |
 97			SNDRV_PCM_RATE_88200 |
 98			SNDRV_PCM_RATE_96000,
 99	.rate_min = 8000,
100	.rate_max = 96000,
101	.channels_min = 1,
102	.channels_max = 8,
103	.buffer_bytes_max = 262144,
104	.period_bytes_min = 32,
105	.period_bytes_max = 131072,
106	.periods_min = 2,
107	.periods_max = 220,
108	/* One page (4k) contains 512 instructions. I don't know if the hw
109	supports lists longer than this. In this case periods_max=220 is a
110	safe limit to make sure the list never exceeds 512 instructions.
111	220 ~= (512 - 1 - (BUFFER_BYTES_MAX / PAGE_SIZE)) / 2 */
112};
113
114#include "gina24_dsp.c"
115#include "echoaudio_dsp.c"
116#include "echoaudio_gml.c"
117#include "echoaudio.c"