FILE
wireless.h
File preview with syntax highlighting.
linux-6.19.14/include/uapi/linux/wireless.h
1/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ 2/* 3 * This file define a set of standard wireless extensions 4 * 5 * Version : 22 16.3.07 6 * 7 * Authors : Jean Tourrilhes - HPL - <jt@hpl.hp.com> 8 * Copyright (c) 1997-2007 Jean Tourrilhes, All Rights Reserved. 9 */ 10 11#ifndef _UAPI_LINUX_WIRELESS_H 12#define _UAPI_LINUX_WIRELESS_H 13 14/************************** DOCUMENTATION **************************/ 15/* 16 * Initial APIs (1996 -> onward) : 17 * ----------------------------- 18 * Basically, the wireless extensions are for now a set of standard ioctl 19 * call + /proc/net/wireless 20 * 21 * The entry /proc/net/wireless give statistics and information on the 22 * driver. 23 * This is better than having each driver having its entry because 24 * its centralised and we may remove the driver module safely. 25 * 26 * Ioctl are used to configure the driver and issue commands. This is 27 * better than command line options of insmod because we may want to 28 * change dynamically (while the driver is running) some parameters. 29 * 30 * The ioctl mechanimsm are copied from standard devices ioctl. 31 * We have the list of command plus a structure descibing the 32 * data exchanged... 33 * Note that to add these ioctl, I was obliged to modify : 34 * # net/core/dev.c (two place + add include) 35 * # net/ipv4/af_inet.c (one place + add include) 36 * 37 * /proc/net/wireless is a copy of /proc/net/dev. 38 * We have a structure for data passed from the driver to /proc/net/wireless 39 * Too add this, I've modified : 40 * # net/core/dev.c (two other places) 41 * # include/linux/netdevice.h (one place) 42 * # include/linux/proc_fs.h (one place) 43 * 44 * New driver API (2002 -> onward) : 45 * ------------------------------- 46 * This file is only concerned with the user space API and common definitions. 47 * The new driver API is defined and documented in : 48 * # include/net/iw_handler.h 49 * 50 * Note as well that /proc/net/wireless implementation has now moved in : 51 * # net/core/wireless.c 52 * 53 * Wireless Events (2002 -> onward) : 54 * -------------------------------- 55 * Events are defined at the end of this file, and implemented in : 56 * # net/core/wireless.c 57 * 58 * Other comments : 59 * -------------- 60 * Do not add here things that are redundant with other mechanisms 61 * (drivers init, ifconfig, /proc/net/dev, ...) and with are not 62 * wireless specific. 63 * 64 * These wireless extensions are not magic : each driver has to provide 65 * support for them... 66 * 67 * IMPORTANT NOTE : As everything in the kernel, this is very much a 68 * work in progress. Contact me if you have ideas of improvements... 69 */ 70 71/***************************** INCLUDES *****************************/ 72 73#include <linux/types.h> /* for __u* and __s* typedefs */ 74#include <linux/socket.h> /* for "struct sockaddr" et al */ 75#include <linux/if.h> /* for IFNAMSIZ and co... */ 76 77#ifdef __KERNEL__ 78# include <linux/stddef.h> /* for offsetof */ 79#else 80# include <stddef.h> /* for offsetof */ 81#endif 82 83/***************************** VERSION *****************************/ 84/* 85 * This constant is used to know the availability of the wireless 86 * extensions and to know which version of wireless extensions it is 87 * (there is some stuff that will be added in the future...) 88 * I just plan to increment with each new version. 89 */ 90#define WIRELESS_EXT 22 91 92/* 93 * Changes : 94 * 95 * V2 to V3 96 * -------- 97 * Alan Cox start some incompatibles changes. I've integrated a bit more. 98 * - Encryption renamed to Encode to avoid US regulation problems 99 * - Frequency changed from float to struct to avoid problems on old 386 100 * 101 * V3 to V4 102 * -------- 103 * - Add sensitivity 104 * 105 * V4 to V5 106 * -------- 107 * - Missing encoding definitions in range 108 * - Access points stuff 109 * 110 * V5 to V6 111 * -------- 112 * - 802.11 support (ESSID ioctls) 113 * 114 * V6 to V7 115 * -------- 116 * - define IW_ESSID_MAX_SIZE and IW_MAX_AP 117 * 118 * V7 to V8 119 * -------- 120 * - Changed my e-mail address 121 * - More 802.11 support (nickname, rate, rts, frag) 122 * - List index in frequencies 123 * 124 * V8 to V9 125 * -------- 126 * - Support for 'mode of operation' (ad-hoc, managed...) 127 * - Support for unicast and multicast power saving 128 * - Change encoding to support larger tokens (>64 bits) 129 * - Updated iw_params (disable, flags) and use it for NWID 130 * - Extracted iw_point from iwreq for clarity 131 * 132 * V9 to V10 133 * --------- 134 * - Add PM capability to range structure 135 * - Add PM modifier : MAX/MIN/RELATIVE 136 * - Add encoding option : IW_ENCODE_NOKEY 137 * - Add TxPower ioctls (work like TxRate) 138 * 139 * V10 to V11 140 * ---------- 141 * - Add WE version in range (help backward/forward compatibility) 142 * - Add retry ioctls (work like PM) 143 * 144 * V11 to V12 145 * ---------- 146 * - Add SIOCSIWSTATS to get /proc/net/wireless programatically 147 * - Add DEV PRIVATE IOCTL to avoid collisions in SIOCDEVPRIVATE space 148 * - Add new statistics (frag, retry, beacon) 149 * - Add average quality (for user space calibration) 150 * 151 * V12 to V13 152 * ---------- 153 * - Document creation of new driver API. 154 * - Extract union iwreq_data from struct iwreq (for new driver API). 155 * - Rename SIOCSIWNAME as SIOCSIWCOMMIT 156 * 157 * V13 to V14 158 * ---------- 159 * - Wireless Events support : define struct iw_event 160 * - Define additional specific event numbers 161 * - Add "addr" and "param" fields in union iwreq_data 162 * - AP scanning stuff (SIOCSIWSCAN and friends) 163 * 164 * V14 to V15 165 * ---------- 166 * - Add IW_PRIV_TYPE_ADDR for struct sockaddr private arg 167 * - Make struct iw_freq signed (both m & e), add explicit padding 168 * - Add IWEVCUSTOM for driver specific event/scanning token 169 * - Add IW_MAX_GET_SPY for driver returning a lot of addresses 170 * - Add IW_TXPOW_RANGE for range of Tx Powers 171 * - Add IWEVREGISTERED & IWEVEXPIRED events for Access Points 172 * - Add IW_MODE_MONITOR for passive monitor 173 * 174 * V15 to V16 175 * ---------- 176 * - Increase the number of bitrates in iw_range to 32 (for 802.11g) 177 * - Increase the number of frequencies in iw_range to 32 (for 802.11b+a) 178 * - Reshuffle struct iw_range for increases, add filler 179 * - Increase IW_MAX_AP to 64 for driver returning a lot of addresses 180 * - Remove IW_MAX_GET_SPY because conflict with enhanced spy support 181 * - Add SIOCSIWTHRSPY/SIOCGIWTHRSPY and "struct iw_thrspy" 182 * - Add IW_ENCODE_TEMP and iw_range->encoding_login_index 183 * 184 * V16 to V17 185 * ---------- 186 * - Add flags to frequency -> auto/fixed 187 * - Document (struct iw_quality *)->updated, add new flags (INVALID) 188 * - Wireless Event capability in struct iw_range 189 * - Add support for relative TxPower (yick !) 190 * 191 * V17 to V18 (From Jouni Malinen <j@w1.fi>) 192 * ---------- 193 * - Add support for WPA/WPA2 194 * - Add extended encoding configuration (SIOCSIWENCODEEXT and 195 * SIOCGIWENCODEEXT) 196 * - Add SIOCSIWGENIE/SIOCGIWGENIE 197 * - Add SIOCSIWMLME 198 * - Add SIOCSIWPMKSA 199 * - Add struct iw_range bit field for supported encoding capabilities 200 * - Add optional scan request parameters for SIOCSIWSCAN 201 * - Add SIOCSIWAUTH/SIOCGIWAUTH for setting authentication and WPA 202 * related parameters (extensible up to 4096 parameter values) 203 * - Add wireless events: IWEVGENIE, IWEVMICHAELMICFAILURE, 204 * IWEVASSOCREQIE, IWEVASSOCRESPIE, IWEVPMKIDCAND 205 * 206 * V18 to V19 207 * ---------- 208 * - Remove (struct iw_point *)->pointer from events and streams 209 * - Remove header includes to help user space 210 * - Increase IW_ENCODING_TOKEN_MAX from 32 to 64 211 * - Add IW_QUAL_ALL_UPDATED and IW_QUAL_ALL_INVALID macros 212 * - Add explicit flag to tell stats are in dBm : IW_QUAL_DBM 213 * - Add IW_IOCTL_IDX() and IW_EVENT_IDX() macros 214 * 215 * V19 to V20 216 * ---------- 217 * - RtNetlink requests support (SET/GET) 218 * 219 * V20 to V21 220 * ---------- 221 * - Remove (struct net_device *)->get_wireless_stats() 222 * - Change length in ESSID and NICK to strlen() instead of strlen()+1 223 * - Add IW_RETRY_SHORT/IW_RETRY_LONG retry modifiers 224 * - Power/Retry relative values no longer * 100000 225 * - Add explicit flag to tell stats are in 802.11k RCPI : IW_QUAL_RCPI 226 * 227 * V21 to V22 228 * ---------- 229 * - Prevent leaking of kernel space in stream on 64 bits. 230 */ 231 232/**************************** CONSTANTS ****************************/ 233 234/* -------------------------- IOCTL LIST -------------------------- */ 235 236/* Wireless Identification */ 237#define SIOCSIWCOMMIT 0x8B00 /* Commit pending changes to driver */ 238#define SIOCGIWNAME 0x8B01 /* get name == wireless protocol */ 239/* SIOCGIWNAME is used to verify the presence of Wireless Extensions. 240 * Common values : "IEEE 802.11-DS", "IEEE 802.11-FH", "IEEE 802.11b"... 241 * Don't put the name of your driver there, it's useless. */ 242 243/* Basic operations */ 244#define SIOCSIWNWID 0x8B02 /* set network id (pre-802.11) */ 245#define SIOCGIWNWID 0x8B03 /* get network id (the cell) */ 246#define SIOCSIWFREQ 0x8B04 /* set channel/frequency (Hz) */ 247#define SIOCGIWFREQ 0x8B05 /* get channel/frequency (Hz) */ 248#define SIOCSIWMODE 0x8B06 /* set operation mode */ 249#define SIOCGIWMODE 0x8B07 /* get operation mode */ 250#define SIOCSIWSENS 0x8B08 /* set sensitivity (dBm) */ 251#define SIOCGIWSENS 0x8B09 /* get sensitivity (dBm) */ 252 253/* Informative stuff */ 254#define SIOCSIWRANGE 0x8B0A /* Unused */ 255#define SIOCGIWRANGE 0x8B0B /* Get range of parameters */ 256#define SIOCSIWPRIV 0x8B0C /* Unused */ 257#define SIOCGIWPRIV 0x8B0D /* get private ioctl interface info */ 258#define SIOCSIWSTATS 0x8B0E /* Unused */ 259#define SIOCGIWSTATS 0x8B0F /* Get /proc/net/wireless stats */ 260/* SIOCGIWSTATS is strictly used between user space and the kernel, and 261 * is never passed to the driver (i.e. the driver will never see it). */ 262 263/* Spy support (statistics per MAC address - used for Mobile IP support) */ 264#define SIOCSIWSPY 0x8B10 /* set spy addresses */ 265#define SIOCGIWSPY 0x8B11 /* get spy info (quality of link) */ 266#define SIOCSIWTHRSPY 0x8B12 /* set spy threshold (spy event) */ 267#define SIOCGIWTHRSPY 0x8B13 /* get spy threshold */ 268 269/* Access Point manipulation */ 270#define SIOCSIWAP 0x8B14 /* set access point MAC addresses */ 271#define SIOCGIWAP 0x8B15 /* get access point MAC addresses */ 272#define SIOCGIWAPLIST 0x8B17 /* Deprecated in favor of scanning */ 273#define SIOCSIWSCAN 0x8B18 /* trigger scanning (list cells) */ 274#define SIOCGIWSCAN 0x8B19 /* get scanning results */ 275 276/* 802.11 specific support */ 277#define SIOCSIWESSID 0x8B1A /* set ESSID (network name) */ 278#define SIOCGIWESSID 0x8B1B /* get ESSID */ 279#define SIOCSIWNICKN 0x8B1C /* set node name/nickname */ 280#define SIOCGIWNICKN 0x8B1D /* get node name/nickname */ 281/* As the ESSID and NICKN are strings up to 32 bytes long, it doesn't fit 282 * within the 'iwreq' structure, so we need to use the 'data' member to 283 * point to a string in user space, like it is done for RANGE... */ 284 285/* Other parameters useful in 802.11 and some other devices */ 286#define SIOCSIWRATE 0x8B20 /* set default bit rate (bps) */ 287#define SIOCGIWRATE 0x8B21 /* get default bit rate (bps) */ 288#define SIOCSIWRTS 0x8B22 /* set RTS/CTS threshold (bytes) */ 289#define SIOCGIWRTS 0x8B23 /* get RTS/CTS threshold (bytes) */ 290#define SIOCSIWFRAG 0x8B24 /* set fragmentation thr (bytes) */ 291#define SIOCGIWFRAG 0x8B25 /* get fragmentation thr (bytes) */ 292#define SIOCSIWTXPOW 0x8B26 /* set transmit power (dBm) */ 293#define SIOCGIWTXPOW 0x8B27 /* get transmit power (dBm) */ 294#define SIOCSIWRETRY 0x8B28 /* set retry limits and lifetime */ 295#define SIOCGIWRETRY 0x8B29 /* get retry limits and lifetime */ 296 297/* Encoding stuff (scrambling, hardware security, WEP...) */ 298#define SIOCSIWENCODE 0x8B2A /* set encoding token & mode */ 299#define SIOCGIWENCODE 0x8B2B /* get encoding token & mode */ 300/* Power saving stuff (power management, unicast and multicast) */ 301#define SIOCSIWPOWER 0x8B2C /* set Power Management settings */ 302#define SIOCGIWPOWER 0x8B2D /* get Power Management settings */ 303 304/* WPA : Generic IEEE 802.11 informatiom element (e.g., for WPA/RSN/WMM). 305 * This ioctl uses struct iw_point and data buffer that includes IE id and len 306 * fields. More than one IE may be included in the request. Setting the generic 307 * IE to empty buffer (len=0) removes the generic IE from the driver. Drivers 308 * are allowed to generate their own WPA/RSN IEs, but in these cases, drivers 309 * are required to report the used IE as a wireless event, e.g., when 310 * associating with an AP. */ 311#define SIOCSIWGENIE 0x8B30 /* set generic IE */ 312#define SIOCGIWGENIE 0x8B31 /* get generic IE */ 313 314/* WPA : IEEE 802.11 MLME requests */ 315#define SIOCSIWMLME 0x8B16 /* request MLME operation; uses 316 * struct iw_mlme */ 317/* WPA : Authentication mode parameters */ 318#define SIOCSIWAUTH 0x8B32 /* set authentication mode params */ 319#define SIOCGIWAUTH 0x8B33 /* get authentication mode params */ 320 321/* WPA : Extended version of encoding configuration */ 322#define SIOCSIWENCODEEXT 0x8B34 /* set encoding token & mode */ 323#define SIOCGIWENCODEEXT 0x8B35 /* get encoding token & mode */ 324 325/* WPA2 : PMKSA cache management */ 326#define SIOCSIWPMKSA 0x8B36 /* PMKSA cache operation */ 327 328/* -------------------- DEV PRIVATE IOCTL LIST -------------------- */ 329 330/* These 32 ioctl are wireless device private, for 16 commands. 331 * Each driver is free to use them for whatever purpose it chooses, 332 * however the driver *must* export the description of those ioctls 333 * with SIOCGIWPRIV and *must* use arguments as defined below. 334 * If you don't follow those rules, DaveM is going to hate you (reason : 335 * it make mixed 32/64bit operation impossible). 336 */ 337#define SIOCIWFIRSTPRIV 0x8BE0 338#define SIOCIWLASTPRIV 0x8BFF 339/* Previously, we were using SIOCDEVPRIVATE, but we now have our 340 * separate range because of collisions with other tools such as 341 * 'mii-tool'. 342 * We now have 32 commands, so a bit more space ;-). 343 * Also, all 'even' commands are only usable by root and don't return the 344 * content of ifr/iwr to user (but you are not obliged to use the set/get 345 * convention, just use every other two command). More details in iwpriv.c. 346 * And I repeat : you are not forced to use them with iwpriv, but you 347 * must be compliant with it. 348 */ 349 350/* ------------------------- IOCTL STUFF ------------------------- */ 351 352/* The first and the last (range) */ 353#define SIOCIWFIRST 0x8B00 354#define SIOCIWLAST SIOCIWLASTPRIV /* 0x8BFF */ 355#define IW_IOCTL_IDX(cmd) ((cmd) - SIOCIWFIRST) 356#define IW_HANDLER(id, func) \ 357 [IW_IOCTL_IDX(id)] = func 358 359/* Odd : get (world access), even : set (root access) */ 360#define IW_IS_SET(cmd) (!((cmd) & 0x1)) 361#define IW_IS_GET(cmd) ((cmd) & 0x1) 362 363/* ----------------------- WIRELESS EVENTS ----------------------- */ 364/* Those are *NOT* ioctls, do not issue request on them !!! */ 365/* Most events use the same identifier as ioctl requests */ 366 367#define IWEVTXDROP 0x8C00 /* Packet dropped to excessive retry */ 368#define IWEVQUAL 0x8C01 /* Quality part of statistics (scan) */ 369#define IWEVCUSTOM 0x8C02 /* Driver specific ascii string */ 370#define IWEVREGISTERED 0x8C03 /* Discovered a new node (AP mode) */ 371#define IWEVEXPIRED 0x8C04 /* Expired a node (AP mode) */ 372#define IWEVGENIE 0x8C05 /* Generic IE (WPA, RSN, WMM, ..) 373 * (scan results); This includes id and 374 * length fields. One IWEVGENIE may 375 * contain more than one IE. Scan 376 * results may contain one or more 377 * IWEVGENIE events. */ 378#define IWEVMICHAELMICFAILURE 0x8C06 /* Michael MIC failure 379 * (struct iw_michaelmicfailure) 380 */ 381#define IWEVASSOCREQIE 0x8C07 /* IEs used in (Re)Association Request. 382 * The data includes id and length 383 * fields and may contain more than one 384 * IE. This event is required in 385 * Managed mode if the driver 386 * generates its own WPA/RSN IE. This 387 * should be sent just before 388 * IWEVREGISTERED event for the 389 * association. */ 390#define IWEVASSOCRESPIE 0x8C08 /* IEs used in (Re)Association 391 * Response. The data includes id and 392 * length fields and may contain more 393 * than one IE. This may be sent 394 * between IWEVASSOCREQIE and 395 * IWEVREGISTERED events for the 396 * association. */ 397#define IWEVPMKIDCAND 0x8C09 /* PMKID candidate for RSN 398 * pre-authentication 399 * (struct iw_pmkid_cand) */ 400 401#define IWEVFIRST 0x8C00 402#define IW_EVENT_IDX(cmd) ((cmd) - IWEVFIRST) 403 404/* ------------------------- PRIVATE INFO ------------------------- */ 405/* 406 * The following is used with SIOCGIWPRIV. It allow a driver to define 407 * the interface (name, type of data) for its private ioctl. 408 * Privates ioctl are SIOCIWFIRSTPRIV -> SIOCIWLASTPRIV 409 */ 410 411#define IW_PRIV_TYPE_MASK 0x7000 /* Type of arguments */ 412#define IW_PRIV_TYPE_NONE 0x0000 413#define IW_PRIV_TYPE_BYTE 0x1000 /* Char as number */ 414#define IW_PRIV_TYPE_CHAR 0x2000 /* Char as character */ 415#define IW_PRIV_TYPE_INT 0x4000 /* 32 bits int */ 416#define IW_PRIV_TYPE_FLOAT 0x5000 /* struct iw_freq */ 417#define IW_PRIV_TYPE_ADDR 0x6000 /* struct sockaddr */ 418 419#define IW_PRIV_SIZE_FIXED 0x0800 /* Variable or fixed number of args */ 420 421#define IW_PRIV_SIZE_MASK 0x07FF /* Max number of those args */ 422 423/* 424 * Note : if the number of args is fixed and the size < 16 octets, 425 * instead of passing a pointer we will put args in the iwreq struct... 426 */ 427 428/* ----------------------- OTHER CONSTANTS ----------------------- */ 429 430/* Maximum frequencies in the range struct */ 431#define IW_MAX_FREQUENCIES 32 432/* Note : if you have something like 80 frequencies, 433 * don't increase this constant and don't fill the frequency list. 434 * The user will be able to set by channel anyway... */ 435 436/* Maximum bit rates in the range struct */ 437#define IW_MAX_BITRATES 32 438 439/* Maximum tx powers in the range struct */ 440#define IW_MAX_TXPOWER 8 441/* Note : if you more than 8 TXPowers, just set the max and min or 442 * a few of them in the struct iw_range. */ 443 444/* Maximum of address that you may set with SPY */ 445#define IW_MAX_SPY 8 446 447/* Maximum of address that you may get in the 448 list of access points in range */ 449#define IW_MAX_AP 64 450 451/* Maximum size of the ESSID and NICKN strings */ 452#define IW_ESSID_MAX_SIZE 32 453 454/* Modes of operation */ 455#define IW_MODE_AUTO 0 /* Let the driver decides */ 456#define IW_MODE_ADHOC 1 /* Single cell network */ 457#define IW_MODE_INFRA 2 /* Multi cell network, roaming, ... */ 458#define IW_MODE_MASTER 3 /* Synchronisation master or Access Point */ 459#define IW_MODE_REPEAT 4 /* Wireless Repeater (forwarder) */ 460#define IW_MODE_SECOND 5 /* Secondary master/repeater (backup) */ 461#define IW_MODE_MONITOR 6 /* Passive monitor (listen only) */ 462#define IW_MODE_MESH 7 /* Mesh (IEEE 802.11s) network */ 463 464/* Statistics flags (bitmask in updated) */ 465#define IW_QUAL_QUAL_UPDATED 0x01 /* Value was updated since last read */ 466#define IW_QUAL_LEVEL_UPDATED 0x02 467#define IW_QUAL_NOISE_UPDATED 0x04 468#define IW_QUAL_ALL_UPDATED 0x07 469#define IW_QUAL_DBM 0x08 /* Level + Noise are dBm */ 470#define IW_QUAL_QUAL_INVALID 0x10 /* Driver doesn't provide value */ 471#define IW_QUAL_LEVEL_INVALID 0x20 472#define IW_QUAL_NOISE_INVALID 0x40 473#define IW_QUAL_RCPI 0x80 /* Level + Noise are 802.11k RCPI */ 474#define IW_QUAL_ALL_INVALID 0x70 475 476/* Frequency flags */ 477#define IW_FREQ_AUTO 0x00 /* Let the driver decides */ 478#define IW_FREQ_FIXED 0x01 /* Force a specific value */ 479 480/* Maximum number of size of encoding token available 481 * they are listed in the range structure */ 482#define IW_MAX_ENCODING_SIZES 8 483 484/* Maximum size of the encoding token in bytes */ 485#define IW_ENCODING_TOKEN_MAX 64 /* 512 bits (for now) */ 486 487/* Flags for encoding (along with the token) */ 488#define IW_ENCODE_INDEX 0x00FF /* Token index (if needed) */ 489#define IW_ENCODE_FLAGS 0xFF00 /* Flags defined below */ 490#define IW_ENCODE_MODE 0xF000 /* Modes defined below */ 491#define IW_ENCODE_DISABLED 0x8000 /* Encoding disabled */ 492#define IW_ENCODE_ENABLED 0x0000 /* Encoding enabled */ 493#define IW_ENCODE_RESTRICTED 0x4000 /* Refuse non-encoded packets */ 494#define IW_ENCODE_OPEN 0x2000 /* Accept non-encoded packets */ 495#define IW_ENCODE_NOKEY 0x0800 /* Key is write only, so not present */ 496#define IW_ENCODE_TEMP 0x0400 /* Temporary key */ 497 498/* Power management flags available (along with the value, if any) */ 499#define IW_POWER_ON 0x0000 /* No details... */ 500#define IW_POWER_TYPE 0xF000 /* Type of parameter */ 501#define IW_POWER_PERIOD 0x1000 /* Value is a period/duration of */ 502#define IW_POWER_TIMEOUT 0x2000 /* Value is a timeout (to go asleep) */ 503#define IW_POWER_MODE 0x0F00 /* Power Management mode */ 504#define IW_POWER_UNICAST_R 0x0100 /* Receive only unicast messages */ 505#define IW_POWER_MULTICAST_R 0x0200 /* Receive only multicast messages */ 506#define IW_POWER_ALL_R 0x0300 /* Receive all messages though PM */ 507#define IW_POWER_FORCE_S 0x0400 /* Force PM procedure for sending unicast */ 508#define IW_POWER_REPEATER 0x0800 /* Repeat broadcast messages in PM period */ 509#define IW_POWER_MODIFIER 0x000F /* Modify a parameter */ 510#define IW_POWER_MIN 0x0001 /* Value is a minimum */ 511#define IW_POWER_MAX 0x0002 /* Value is a maximum */ 512#define IW_POWER_RELATIVE 0x0004 /* Value is not in seconds/ms/us */ 513 514/* Transmit Power flags available */ 515#define IW_TXPOW_TYPE 0x00FF /* Type of value */ 516#define IW_TXPOW_DBM 0x0000 /* Value is in dBm */ 517#define IW_TXPOW_MWATT 0x0001 /* Value is in mW */ 518#define IW_TXPOW_RELATIVE 0x0002 /* Value is in arbitrary units */ 519#define IW_TXPOW_RANGE 0x1000 /* Range of value between min/max */ 520 521/* Retry limits and lifetime flags available */ 522#define IW_RETRY_ON 0x0000 /* No details... */ 523#define IW_RETRY_TYPE 0xF000 /* Type of parameter */ 524#define IW_RETRY_LIMIT 0x1000 /* Maximum number of retries*/ 525#define IW_RETRY_LIFETIME 0x2000 /* Maximum duration of retries in us */ 526#define IW_RETRY_MODIFIER 0x00FF /* Modify a parameter */ 527#define IW_RETRY_MIN 0x0001 /* Value is a minimum */ 528#define IW_RETRY_MAX 0x0002 /* Value is a maximum */ 529#define IW_RETRY_RELATIVE 0x0004 /* Value is not in seconds/ms/us */ 530#define IW_RETRY_SHORT 0x0010 /* Value is for short packets */ 531#define IW_RETRY_LONG 0x0020 /* Value is for long packets */ 532 533/* Scanning request flags */ 534#define IW_SCAN_DEFAULT 0x0000 /* Default scan of the driver */ 535#define IW_SCAN_ALL_ESSID 0x0001 /* Scan all ESSIDs */ 536#define IW_SCAN_THIS_ESSID 0x0002 /* Scan only this ESSID */ 537#define IW_SCAN_ALL_FREQ 0x0004 /* Scan all Frequencies */ 538#define IW_SCAN_THIS_FREQ 0x0008 /* Scan only this Frequency */ 539#define IW_SCAN_ALL_MODE 0x0010 /* Scan all Modes */ 540#define IW_SCAN_THIS_MODE 0x0020 /* Scan only this Mode */ 541#define IW_SCAN_ALL_RATE 0x0040 /* Scan all Bit-Rates */ 542#define IW_SCAN_THIS_RATE 0x0080 /* Scan only this Bit-Rate */ 543/* struct iw_scan_req scan_type */ 544#define IW_SCAN_TYPE_ACTIVE 0 545#define IW_SCAN_TYPE_PASSIVE 1 546/* Maximum size of returned data */ 547#define IW_SCAN_MAX_DATA 4096 /* In bytes */ 548 549/* Scan capability flags - in (struct iw_range *)->scan_capa */ 550#define IW_SCAN_CAPA_NONE 0x00 551#define IW_SCAN_CAPA_ESSID 0x01 552#define IW_SCAN_CAPA_BSSID 0x02 553#define IW_SCAN_CAPA_CHANNEL 0x04 554#define IW_SCAN_CAPA_MODE 0x08 555#define IW_SCAN_CAPA_RATE 0x10 556#define IW_SCAN_CAPA_TYPE 0x20 557#define IW_SCAN_CAPA_TIME 0x40 558 559/* Max number of char in custom event - use multiple of them if needed */ 560#define IW_CUSTOM_MAX 256 /* In bytes */ 561 562/* Generic information element */ 563#define IW_GENERIC_IE_MAX 1024 564 565/* MLME requests (SIOCSIWMLME / struct iw_mlme) */ 566#define IW_MLME_DEAUTH 0 567#define IW_MLME_DISASSOC 1 568#define IW_MLME_AUTH 2 569#define IW_MLME_ASSOC 3 570 571/* SIOCSIWAUTH/SIOCGIWAUTH struct iw_param flags */ 572#define IW_AUTH_INDEX 0x0FFF 573#define IW_AUTH_FLAGS 0xF000 574/* SIOCSIWAUTH/SIOCGIWAUTH parameters (0 .. 4095) 575 * (IW_AUTH_INDEX mask in struct iw_param flags; this is the index of the 576 * parameter that is being set/get to; value will be read/written to 577 * struct iw_param value field) */ 578#define IW_AUTH_WPA_VERSION 0 579#define IW_AUTH_CIPHER_PAIRWISE 1 580#define IW_AUTH_CIPHER_GROUP 2 581#define IW_AUTH_KEY_MGMT 3 582#define IW_AUTH_TKIP_COUNTERMEASURES 4 583#define IW_AUTH_DROP_UNENCRYPTED 5 584#define IW_AUTH_80211_AUTH_ALG 6 585#define IW_AUTH_WPA_ENABLED 7 586#define IW_AUTH_RX_UNENCRYPTED_EAPOL 8 587#define IW_AUTH_ROAMING_CONTROL 9 588#define IW_AUTH_PRIVACY_INVOKED 10 589#define IW_AUTH_CIPHER_GROUP_MGMT 11 590#define IW_AUTH_MFP 12 591 592/* IW_AUTH_WPA_VERSION values (bit field) */ 593#define IW_AUTH_WPA_VERSION_DISABLED 0x00000001 594#define IW_AUTH_WPA_VERSION_WPA 0x00000002 595#define IW_AUTH_WPA_VERSION_WPA2 0x00000004 596 597/* IW_AUTH_PAIRWISE_CIPHER, IW_AUTH_GROUP_CIPHER, and IW_AUTH_CIPHER_GROUP_MGMT 598 * values (bit field) */ 599#define IW_AUTH_CIPHER_NONE 0x00000001 600#define IW_AUTH_CIPHER_WEP40 0x00000002 601#define IW_AUTH_CIPHER_TKIP 0x00000004 602#define IW_AUTH_CIPHER_CCMP 0x00000008 603#define IW_AUTH_CIPHER_WEP104 0x00000010 604#define IW_AUTH_CIPHER_AES_CMAC 0x00000020 605 606/* IW_AUTH_KEY_MGMT values (bit field) */ 607#define IW_AUTH_KEY_MGMT_802_1X 1 608#define IW_AUTH_KEY_MGMT_PSK 2 609 610/* IW_AUTH_80211_AUTH_ALG values (bit field) */ 611#define IW_AUTH_ALG_OPEN_SYSTEM 0x00000001 612#define IW_AUTH_ALG_SHARED_KEY 0x00000002 613#define IW_AUTH_ALG_LEAP 0x00000004 614 615/* IW_AUTH_ROAMING_CONTROL values */ 616#define IW_AUTH_ROAMING_ENABLE 0 /* driver/firmware based roaming */ 617#define IW_AUTH_ROAMING_DISABLE 1 /* user space program used for roaming 618 * control */ 619 620/* IW_AUTH_MFP (management frame protection) values */ 621#define IW_AUTH_MFP_DISABLED 0 /* MFP disabled */ 622#define IW_AUTH_MFP_OPTIONAL 1 /* MFP optional */ 623#define IW_AUTH_MFP_REQUIRED 2 /* MFP required */ 624 625/* SIOCSIWENCODEEXT definitions */ 626#define IW_ENCODE_SEQ_MAX_SIZE 8 627/* struct iw_encode_ext ->alg */ 628#define IW_ENCODE_ALG_NONE 0 629#define IW_ENCODE_ALG_WEP 1 630#define IW_ENCODE_ALG_TKIP 2 631#define IW_ENCODE_ALG_CCMP 3 632#define IW_ENCODE_ALG_PMK 4 633#define IW_ENCODE_ALG_AES_CMAC 5 634/* struct iw_encode_ext ->ext_flags */ 635#define IW_ENCODE_EXT_TX_SEQ_VALID 0x00000001 636#define IW_ENCODE_EXT_RX_SEQ_VALID 0x00000002 637#define IW_ENCODE_EXT_GROUP_KEY 0x00000004 638#define IW_ENCODE_EXT_SET_TX_KEY 0x00000008 639 640/* IWEVMICHAELMICFAILURE : struct iw_michaelmicfailure ->flags */ 641#define IW_MICFAILURE_KEY_ID 0x00000003 /* Key ID 0..3 */ 642#define IW_MICFAILURE_GROUP 0x00000004 643#define IW_MICFAILURE_PAIRWISE 0x00000008 644#define IW_MICFAILURE_STAKEY 0x00000010 645#define IW_MICFAILURE_COUNT 0x00000060 /* 1 or 2 (0 = count not supported) 646 */ 647 648/* Bit field values for enc_capa in struct iw_range */ 649#define IW_ENC_CAPA_WPA 0x00000001 650#define IW_ENC_CAPA_WPA2 0x00000002 651#define IW_ENC_CAPA_CIPHER_TKIP 0x00000004 652#define IW_ENC_CAPA_CIPHER_CCMP 0x00000008 653#define IW_ENC_CAPA_4WAY_HANDSHAKE 0x00000010 654 655/* Event capability macros - in (struct iw_range *)->event_capa 656 * Because we have more than 32 possible events, we use an array of 657 * 32 bit bitmasks. Note : 32 bits = 0x20 = 2^5. */ 658#define IW_EVENT_CAPA_BASE(cmd) ((cmd >= SIOCIWFIRSTPRIV) ? \ 659 (cmd - SIOCIWFIRSTPRIV + 0x60) : \ 660 (cmd - SIOCIWFIRST)) 661#define IW_EVENT_CAPA_INDEX(cmd) (IW_EVENT_CAPA_BASE(cmd) >> 5) 662#define IW_EVENT_CAPA_MASK(cmd) (1 << (IW_EVENT_CAPA_BASE(cmd) & 0x1F)) 663/* Event capability constants - event autogenerated by the kernel 664 * This list is valid for most 802.11 devices, customise as needed... */ 665#define IW_EVENT_CAPA_K_0 (IW_EVENT_CAPA_MASK(0x8B04) | \ 666 IW_EVENT_CAPA_MASK(0x8B06) | \ 667 IW_EVENT_CAPA_MASK(0x8B1A)) 668#define IW_EVENT_CAPA_K_1 (IW_EVENT_CAPA_MASK(0x8B2A)) 669/* "Easy" macro to set events in iw_range (less efficient) */ 670#define IW_EVENT_CAPA_SET(event_capa, cmd) (event_capa[IW_EVENT_CAPA_INDEX(cmd)] |= IW_EVENT_CAPA_MASK(cmd)) 671#define IW_EVENT_CAPA_SET_KERNEL(event_capa) {event_capa[0] |= IW_EVENT_CAPA_K_0; event_capa[1] |= IW_EVENT_CAPA_K_1; } 672 673 674/****************************** TYPES ******************************/ 675 676/* --------------------------- SUBTYPES --------------------------- */ 677/* 678 * Generic format for most parameters that fit in an int 679 */ 680struct iw_param { 681 __s32 value; /* The value of the parameter itself */ 682 __u8 fixed; /* Hardware should not use auto select */ 683 __u8 disabled; /* Disable the feature */ 684 __u16 flags; /* Various specifc flags (if any) */ 685}; 686 687/* 688 * For all data larger than 16 octets, we need to use a 689 * pointer to memory allocated in user space. 690 */ 691struct iw_point { 692 void __user *pointer; /* Pointer to the data (in user space) */ 693 __u16 length; /* number of fields or size in bytes */ 694 __u16 flags; /* Optional params */ 695}; 696 697 698/* 699 * A frequency 700 * For numbers lower than 10^9, we encode the number in 'm' and 701 * set 'e' to 0 702 * For number greater than 10^9, we divide it by the lowest power 703 * of 10 to get 'm' lower than 10^9, with 'm'= f / (10^'e')... 704 * The power of 10 is in 'e', the result of the division is in 'm'. 705 */ 706struct iw_freq { 707 __s32 m; /* Mantissa */ 708 __s16 e; /* Exponent */ 709 __u8 i; /* List index (when in range struct) */ 710 __u8 flags; /* Flags (fixed/auto) */ 711}; 712 713/* 714 * Quality of the link 715 */ 716struct iw_quality { 717 __u8 qual; /* link quality (%retries, SNR, 718 %missed beacons or better...) */ 719 __u8 level; /* signal level (dBm) */ 720 __u8 noise; /* noise level (dBm) */ 721 __u8 updated; /* Flags to know if updated */ 722}; 723 724/* 725 * Packet discarded in the wireless adapter due to 726 * "wireless" specific problems... 727 * Note : the list of counter and statistics in net_device_stats 728 * is already pretty exhaustive, and you should use that first. 729 * This is only additional stats... 730 */ 731struct iw_discarded { 732 __u32 nwid; /* Rx : Wrong nwid/essid */ 733 __u32 code; /* Rx : Unable to code/decode (WEP) */ 734 __u32 fragment; /* Rx : Can't perform MAC reassembly */ 735 __u32 retries; /* Tx : Max MAC retries num reached */ 736 __u32 misc; /* Others cases */ 737}; 738 739/* 740 * Packet/Time period missed in the wireless adapter due to 741 * "wireless" specific problems... 742 */ 743struct iw_missed { 744 __u32 beacon; /* Missed beacons/superframe */ 745}; 746 747/* 748 * Quality range (for spy threshold) 749 */ 750struct iw_thrspy { 751 struct sockaddr addr; /* Source address (hw/mac) */ 752 struct iw_quality qual; /* Quality of the link */ 753 struct iw_quality low; /* Low threshold */ 754 struct iw_quality high; /* High threshold */ 755}; 756 757/* 758 * Optional data for scan request 759 * 760 * Note: these optional parameters are controlling parameters for the 761 * scanning behavior, these do not apply to getting scan results 762 * (SIOCGIWSCAN). Drivers are expected to keep a local BSS table and 763 * provide a merged results with all BSSes even if the previous scan 764 * request limited scanning to a subset, e.g., by specifying an SSID. 765 * Especially, scan results are required to include an entry for the 766 * current BSS if the driver is in Managed mode and associated with an AP. 767 */ 768struct iw_scan_req { 769 __u8 scan_type; /* IW_SCAN_TYPE_{ACTIVE,PASSIVE} */ 770 __u8 essid_len; 771 __u8 num_channels; /* num entries in channel_list; 772 * 0 = scan all allowed channels */ 773 __u8 flags; /* reserved as padding; use zero, this may 774 * be used in the future for adding flags 775 * to request different scan behavior */ 776 struct sockaddr bssid; /* ff:ff:ff:ff:ff:ff for broadcast BSSID or 777 * individual address of a specific BSS */ 778 779 /* 780 * Use this ESSID if IW_SCAN_THIS_ESSID flag is used instead of using 781 * the current ESSID. This allows scan requests for specific ESSID 782 * without having to change the current ESSID and potentially breaking 783 * the current association. 784 */ 785 __u8 essid[IW_ESSID_MAX_SIZE]; 786 787 /* 788 * Optional parameters for changing the default scanning behavior. 789 * These are based on the MLME-SCAN.request from IEEE Std 802.11. 790 * TU is 1.024 ms. If these are set to 0, driver is expected to use 791 * reasonable default values. min_channel_time defines the time that 792 * will be used to wait for the first reply on each channel. If no 793 * replies are received, next channel will be scanned after this. If 794 * replies are received, total time waited on the channel is defined by 795 * max_channel_time. 796 */ 797 __u32 min_channel_time; /* in TU */ 798 __u32 max_channel_time; /* in TU */ 799 800 struct iw_freq channel_list[IW_MAX_FREQUENCIES]; 801}; 802 803/* ------------------------- WPA SUPPORT ------------------------- */ 804 805/* 806 * Extended data structure for get/set encoding (this is used with 807 * SIOCSIWENCODEEXT/SIOCGIWENCODEEXT. struct iw_point and IW_ENCODE_* 808 * flags are used in the same way as with SIOCSIWENCODE/SIOCGIWENCODE and 809 * only the data contents changes (key data -> this structure, including 810 * key data). 811 * 812 * If the new key is the first group key, it will be set as the default 813 * TX key. Otherwise, default TX key index is only changed if 814 * IW_ENCODE_EXT_SET_TX_KEY flag is set. 815 * 816 * Key will be changed with SIOCSIWENCODEEXT in all cases except for 817 * special "change TX key index" operation which is indicated by setting 818 * key_len = 0 and ext_flags |= IW_ENCODE_EXT_SET_TX_KEY. 819 * 820 * tx_seq/rx_seq are only used when respective 821 * IW_ENCODE_EXT_{TX,RX}_SEQ_VALID flag is set in ext_flags. Normal 822 * TKIP/CCMP operation is to set RX seq with SIOCSIWENCODEEXT and start 823 * TX seq from zero whenever key is changed. SIOCGIWENCODEEXT is normally 824 * used only by an Authenticator (AP or an IBSS station) to get the 825 * current TX sequence number. Using TX_SEQ_VALID for SIOCSIWENCODEEXT and 826 * RX_SEQ_VALID for SIOCGIWENCODEEXT are optional, but can be useful for 827 * debugging/testing. 828 */ 829struct iw_encode_ext { 830 __u32 ext_flags; /* IW_ENCODE_EXT_* */ 831 __u8 tx_seq[IW_ENCODE_SEQ_MAX_SIZE]; /* LSB first */ 832 __u8 rx_seq[IW_ENCODE_SEQ_MAX_SIZE]; /* LSB first */ 833 struct sockaddr addr; /* ff:ff:ff:ff:ff:ff for broadcast/multicast 834 * (group) keys or unicast address for 835 * individual keys */ 836 __u16 alg; /* IW_ENCODE_ALG_* */ 837 __u16 key_len; 838 __u8 key[]; 839}; 840 841/* SIOCSIWMLME data */ 842struct iw_mlme { 843 __u16 cmd; /* IW_MLME_* */ 844 __u16 reason_code; 845 struct sockaddr addr; 846}; 847 848/* SIOCSIWPMKSA data */ 849#define IW_PMKSA_ADD 1 850#define IW_PMKSA_REMOVE 2 851#define IW_PMKSA_FLUSH 3 852 853#define IW_PMKID_LEN 16 854 855struct iw_pmksa { 856 __u32 cmd; /* IW_PMKSA_* */ 857 struct sockaddr bssid; 858 __u8 pmkid[IW_PMKID_LEN]; 859}; 860 861/* IWEVMICHAELMICFAILURE data */ 862struct iw_michaelmicfailure { 863 __u32 flags; 864 struct sockaddr src_addr; 865 __u8 tsc[IW_ENCODE_SEQ_MAX_SIZE]; /* LSB first */ 866}; 867 868/* IWEVPMKIDCAND data */ 869#define IW_PMKID_CAND_PREAUTH 0x00000001 /* RNS pre-authentication enabled */ 870struct iw_pmkid_cand { 871 __u32 flags; /* IW_PMKID_CAND_* */ 872 __u32 index; /* the smaller the index, the higher the 873 * priority */ 874 struct sockaddr bssid; 875}; 876 877/* ------------------------ WIRELESS STATS ------------------------ */ 878/* 879 * Wireless statistics (used for /proc/net/wireless) 880 */ 881struct iw_statistics { 882 __u16 status; /* Status 883 * - device dependent for now */ 884 885 struct iw_quality qual; /* Quality of the link 886 * (instant/mean/max) */ 887 struct iw_discarded discard; /* Packet discarded counts */ 888 struct iw_missed miss; /* Packet missed counts */ 889}; 890 891/* ------------------------ IOCTL REQUEST ------------------------ */ 892/* 893 * This structure defines the payload of an ioctl, and is used 894 * below. 895 * 896 * Note that this structure should fit on the memory footprint 897 * of iwreq (which is the same as ifreq), which mean a max size of 898 * 16 octets = 128 bits. Warning, pointers might be 64 bits wide... 899 * You should check this when increasing the structures defined 900 * above in this file... 901 */ 902union iwreq_data { 903 /* Config - generic */ 904 char name[IFNAMSIZ]; 905 /* Name : used to verify the presence of wireless extensions. 906 * Name of the protocol/provider... */ 907 908 struct iw_point essid; /* Extended network name */ 909 struct iw_param nwid; /* network id (or domain - the cell) */ 910 struct iw_freq freq; /* frequency or channel : 911 * 0-1000 = channel 912 * > 1000 = frequency in Hz */ 913 914 struct iw_param sens; /* signal level threshold */ 915 struct iw_param bitrate; /* default bit rate */ 916 struct iw_param txpower; /* default transmit power */ 917 struct iw_param rts; /* RTS threshold */ 918 struct iw_param frag; /* Fragmentation threshold */ 919 __u32 mode; /* Operation mode */ 920 struct iw_param retry; /* Retry limits & lifetime */ 921 922 struct iw_point encoding; /* Encoding stuff : tokens */ 923 struct iw_param power; /* PM duration/timeout */ 924 struct iw_quality qual; /* Quality part of statistics */ 925 926 struct sockaddr ap_addr; /* Access point address */ 927 struct sockaddr addr; /* Destination address (hw/mac) */ 928 929 struct iw_param param; /* Other small parameters */ 930 struct iw_point data; /* Other large parameters */ 931}; 932 933/* 934 * The structure to exchange data for ioctl. 935 * This structure is the same as 'struct ifreq', but (re)defined for 936 * convenience... 937 * Do I need to remind you about structure size (32 octets) ? 938 */ 939struct iwreq { 940 union 941 { 942 char ifrn_name[IFNAMSIZ]; /* if name, e.g. "eth0" */ 943 } ifr_ifrn; 944 945 /* Data part (defined just above) */ 946 union iwreq_data u; 947}; 948 949/* -------------------------- IOCTL DATA -------------------------- */ 950/* 951 * For those ioctl which want to exchange mode data that what could 952 * fit in the above structure... 953 */ 954 955/* 956 * Range of parameters 957 */ 958 959struct iw_range { 960 /* Informative stuff (to choose between different interface) */ 961 __u32 throughput; /* To give an idea... */ 962 /* In theory this value should be the maximum benchmarked 963 * TCP/IP throughput, because with most of these devices the 964 * bit rate is meaningless (overhead an co) to estimate how 965 * fast the connection will go and pick the fastest one. 966 * I suggest people to play with Netperf or any benchmark... 967 */ 968 969 /* NWID (or domain id) */ 970 __u32 min_nwid; /* Minimal NWID we are able to set */ 971 __u32 max_nwid; /* Maximal NWID we are able to set */ 972 973 /* Old Frequency (backward compat - moved lower ) */ 974 __u16 old_num_channels; 975 __u8 old_num_frequency; 976 977 /* Scan capabilities */ 978 __u8 scan_capa; /* IW_SCAN_CAPA_* bit field */ 979 980 /* Wireless event capability bitmasks */ 981 __u32 event_capa[6]; 982 983 /* signal level threshold range */ 984 __s32 sensitivity; 985 986 /* Quality of link & SNR stuff */ 987 /* Quality range (link, level, noise) 988 * If the quality is absolute, it will be in the range [0 ; max_qual], 989 * if the quality is dBm, it will be in the range [max_qual ; 0]. 990 * Don't forget that we use 8 bit arithmetics... */ 991 struct iw_quality max_qual; /* Quality of the link */ 992 /* This should contain the average/typical values of the quality 993 * indicator. This should be the threshold between a "good" and 994 * a "bad" link (example : monitor going from green to orange). 995 * Currently, user space apps like quality monitors don't have any 996 * way to calibrate the measurement. With this, they can split 997 * the range between 0 and max_qual in different quality level 998 * (using a geometric subdivision centered on the average). 999 * I expect that people doing the user space apps will feedback 1000 * us on which value we need to put in each driver... */ 1001 struct iw_quality avg_qual; /* Quality of the link */ 1002 1003 /* Rates */ 1004 __u8 num_bitrates; /* Number of entries in the list */ 1005 __s32 bitrate[IW_MAX_BITRATES]; /* list, in bps */ 1006 1007 /* RTS threshold */ 1008 __s32 min_rts; /* Minimal RTS threshold */ 1009 __s32 max_rts; /* Maximal RTS threshold */ 1010 1011 /* Frag threshold */ 1012 __s32 min_frag; /* Minimal frag threshold */ 1013 __s32 max_frag; /* Maximal frag threshold */ 1014 1015 /* Power Management duration & timeout */ 1016 __s32 min_pmp; /* Minimal PM period */ 1017 __s32 max_pmp; /* Maximal PM period */ 1018 __s32 min_pmt; /* Minimal PM timeout */ 1019 __s32 max_pmt; /* Maximal PM timeout */ 1020 __u16 pmp_flags; /* How to decode max/min PM period */ 1021 __u16 pmt_flags; /* How to decode max/min PM timeout */ 1022 __u16 pm_capa; /* What PM options are supported */ 1023 1024 /* Encoder stuff */ 1025 __u16 encoding_size[IW_MAX_ENCODING_SIZES]; /* Different token sizes */ 1026 __u8 num_encoding_sizes; /* Number of entry in the list */ 1027 __u8 max_encoding_tokens; /* Max number of tokens */ 1028 /* For drivers that need a "login/passwd" form */ 1029 __u8 encoding_login_index; /* token index for login token */ 1030 1031 /* Transmit power */ 1032 __u16 txpower_capa; /* What options are supported */ 1033 __u8 num_txpower; /* Number of entries in the list */ 1034 __s32 txpower[IW_MAX_TXPOWER]; /* list, in bps */ 1035 1036 /* Wireless Extension version info */ 1037 __u8 we_version_compiled; /* Must be WIRELESS_EXT */ 1038 __u8 we_version_source; /* Last update of source */ 1039 1040 /* Retry limits and lifetime */ 1041 __u16 retry_capa; /* What retry options are supported */ 1042 __u16 retry_flags; /* How to decode max/min retry limit */ 1043 __u16 r_time_flags; /* How to decode max/min retry life */ 1044 __s32 min_retry; /* Minimal number of retries */ 1045 __s32 max_retry; /* Maximal number of retries */ 1046 __s32 min_r_time; /* Minimal retry lifetime */ 1047 __s32 max_r_time; /* Maximal retry lifetime */ 1048 1049 /* Frequency */ 1050 __u16 num_channels; /* Number of channels [0; num - 1] */ 1051 __u8 num_frequency; /* Number of entry in the list */ 1052 struct iw_freq freq[IW_MAX_FREQUENCIES]; /* list */ 1053 /* Note : this frequency list doesn't need to fit channel numbers, 1054 * because each entry contain its channel index */ 1055 1056 __u32 enc_capa; /* IW_ENC_CAPA_* bit field */ 1057}; 1058 1059/* 1060 * Private ioctl interface information 1061 */ 1062 1063struct iw_priv_args { 1064 __u32 cmd; /* Number of the ioctl to issue */ 1065 __u16 set_args; /* Type and number of args */ 1066 __u16 get_args; /* Type and number of args */ 1067 char name[IFNAMSIZ]; /* Name of the extension */ 1068}; 1069 1070/* ----------------------- WIRELESS EVENTS ----------------------- */ 1071/* 1072 * Wireless events are carried through the rtnetlink socket to user 1073 * space. They are encapsulated in the IFLA_WIRELESS field of 1074 * a RTM_NEWLINK message. 1075 */ 1076 1077/* 1078 * A Wireless Event. Contains basically the same data as the ioctl... 1079 */ 1080struct iw_event { 1081 __u16 len; /* Real length of this stuff */ 1082 __u16 cmd; /* Wireless IOCTL */ 1083 union iwreq_data u; /* IOCTL fixed payload */ 1084}; 1085 1086/* Size of the Event prefix (including padding and alignement junk) */ 1087#define IW_EV_LCP_LEN (sizeof(struct iw_event) - sizeof(union iwreq_data)) 1088/* Size of the various events */ 1089#define IW_EV_CHAR_LEN (IW_EV_LCP_LEN + IFNAMSIZ) 1090#define IW_EV_UINT_LEN (IW_EV_LCP_LEN + sizeof(__u32)) 1091#define IW_EV_FREQ_LEN (IW_EV_LCP_LEN + sizeof(struct iw_freq)) 1092#define IW_EV_PARAM_LEN (IW_EV_LCP_LEN + sizeof(struct iw_param)) 1093#define IW_EV_ADDR_LEN (IW_EV_LCP_LEN + sizeof(struct sockaddr)) 1094#define IW_EV_QUAL_LEN (IW_EV_LCP_LEN + sizeof(struct iw_quality)) 1095 1096/* iw_point events are special. First, the payload (extra data) come at 1097 * the end of the event, so they are bigger than IW_EV_POINT_LEN. Second, 1098 * we omit the pointer, so start at an offset. */ 1099#define IW_EV_POINT_OFF offsetof(struct iw_point, length) 1100#define IW_EV_POINT_LEN (IW_EV_LCP_LEN + sizeof(struct iw_point) - \ 1101 IW_EV_POINT_OFF) 1102 1103 1104/* Size of the Event prefix when packed in stream */ 1105#define IW_EV_LCP_PK_LEN (4) 1106/* Size of the various events when packed in stream */ 1107#define IW_EV_CHAR_PK_LEN (IW_EV_LCP_PK_LEN + IFNAMSIZ) 1108#define IW_EV_UINT_PK_LEN (IW_EV_LCP_PK_LEN + sizeof(__u32)) 1109#define IW_EV_FREQ_PK_LEN (IW_EV_LCP_PK_LEN + sizeof(struct iw_freq)) 1110#define IW_EV_PARAM_PK_LEN (IW_EV_LCP_PK_LEN + sizeof(struct iw_param)) 1111#define IW_EV_ADDR_PK_LEN (IW_EV_LCP_PK_LEN + sizeof(struct sockaddr)) 1112#define IW_EV_QUAL_PK_LEN (IW_EV_LCP_PK_LEN + sizeof(struct iw_quality)) 1113#define IW_EV_POINT_PK_LEN (IW_EV_LCP_PK_LEN + 4) 1114 1115#endif /* _UAPI_LINUX_WIRELESS_H */
~/
Read-only file preview.