FILE
mali-c55-config.h
File preview with syntax highlighting.
linux-6.19.14/include/uapi/linux/media/arm/mali-c55-config.h
1/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ 2/* 3 * ARM Mali-C55 ISP Driver - Userspace API 4 * 5 * Copyright (C) 2023 Ideas on Board Oy 6 */ 7 8#ifndef __UAPI_MALI_C55_CONFIG_H 9#define __UAPI_MALI_C55_CONFIG_H 10 11#include <linux/types.h> 12#include <linux/v4l2-controls.h> 13#include <linux/media/v4l2-isp.h> 14 15#define V4L2_CID_MALI_C55_CAPABILITIES (V4L2_CID_USER_MALI_C55_BASE + 0x0) 16#define MALI_C55_GPS_PONG (1U << 0) 17#define MALI_C55_GPS_WDR (1U << 1) 18#define MALI_C55_GPS_COMPRESSION (1U << 2) 19#define MALI_C55_GPS_TEMPER (1U << 3) 20#define MALI_C55_GPS_SINTER_LITE (1U << 4) 21#define MALI_C55_GPS_SINTER (1U << 5) 22#define MALI_C55_GPS_IRIDIX_LTM (1U << 6) 23#define MALI_C55_GPS_IRIDIX_GTM (1U << 7) 24#define MALI_C55_GPS_CNR (1U << 8) 25#define MALI_C55_GPS_FRSCALER (1U << 9) 26#define MALI_C55_GPS_DS_PIPE (1U << 10) 27 28/* 29 * Frames are split into zones of almost equal width and height - a zone is a 30 * rectangular tile of a frame. The metering blocks within the ISP collect 31 * aggregated statistics per zone. A maximum of 15x15 zones can be configured, 32 * and so the statistics buffer within the hardware is sized to accommodate 33 * that. 34 * 35 * The utilised number of zones is runtime configurable. 36 */ 37#define MALI_C55_MAX_ZONES (15 * 15) 38 39/** 40 * struct mali_c55_ae_1024bin_hist - Auto Exposure 1024-bin histogram statistics 41 * 42 * @bins: 1024 element array of 16-bit pixel counts. 43 * 44 * The 1024-bin histogram module collects image-global but zone-weighted 45 * intensity distributions of pixels in fixed-width bins. The modules can be 46 * configured into different "plane modes" which affect the contents of the 47 * collected statistics. In plane mode 0, pixel intensities are taken regardless 48 * of colour plane into a single 1024-bin histogram with a bin width of 4. In 49 * plane mode 1, four 256-bin histograms with a bin width of 16 are collected - 50 * one for each CFA colour plane. In plane modes 4, 5, 6 and 7 two 512-bin 51 * histograms with a bin width of 8 are collected - in each mode one of the 52 * colour planes is collected into the first histogram and all the others are 53 * combined into the second. The histograms are stored consecutively in the bins 54 * array. 55 * 56 * The 16-bit pixel counts are stored as a 4-bit exponent in the most 57 * significant bits followed by a 12-bit mantissa. Conversion to a usable 58 * format can be done according to the following pseudo-code:: 59 * 60 * if (e == 0) { 61 * bin = m * 2; 62 * } else { 63 * bin = (m + 4096) * 2^e 64 * } 65 * 66 * where 67 * e is the exponent value in range 0..15 68 * m is the mantissa value in range 0..4095 69 * 70 * The pixels used in calculating the statistics can be masked using three 71 * methods: 72 * 73 * 1. Pixels can be skipped in X and Y directions independently. 74 * 2. Minimum/Maximum intensities can be configured 75 * 3. Zones can be differentially weighted, including 0 weighted to mask them 76 * 77 * The data for this histogram can be collected from different tap points in the 78 * ISP depending on configuration - after the white balance or digital gain 79 * blocks, or immediately after the input crossbar. 80 */ 81struct mali_c55_ae_1024bin_hist { 82 __u16 bins[1024]; 83} __attribute__((packed)); 84 85/** 86 * struct mali_c55_ae_5bin_hist - Auto Exposure 5-bin histogram statistics 87 * 88 * @hist0: 16-bit normalised pixel count for the 0th intensity bin 89 * @hist1: 16-bit normalised pixel count for the 1st intensity bin 90 * @hist3: 16-bit normalised pixel count for the 3rd intensity bin 91 * @hist4: 16-bit normalised pixel count for the 4th intensity bin 92 * 93 * The ISP generates a 5-bin histogram of normalised pixel counts within bins of 94 * pixel intensity for each of 225 possible zones within a frame. The centre bin 95 * of the histogram for each zone is not available from the hardware and must be 96 * calculated by subtracting the values of hist0, hist1, hist3 and hist4 from 97 * 0xffff as in the following equation: 98 * 99 * hist2 = 0xffff - (hist0 + hist1 + hist3 + hist4) 100 */ 101struct mali_c55_ae_5bin_hist { 102 __u16 hist0; 103 __u16 hist1; 104 __u16 hist3; 105 __u16 hist4; 106} __attribute__((packed)); 107 108/** 109 * struct mali_c55_awb_average_ratios - Auto White Balance colour ratios 110 * 111 * @avg_rg_gr: Average R/G or G/R ratio in Q4.8 format. 112 * @avg_bg_br: Average B/G or B/R ratio in Q4.8 format. 113 * @num_pixels: The number of pixels used in the AWB calculation 114 * 115 * The ISP calculates and collects average colour ratios for each zone in an 116 * image and stores them in Q4.8 format (the lowest 8 bits are fractional, with 117 * bits [11:8] representing the integer). The exact ratios collected (either 118 * R/G, B/G or G/R, B/R) are configurable through the parameters buffer. The 119 * value of the 4 high bits is undefined. 120 */ 121struct mali_c55_awb_average_ratios { 122 __u16 avg_rg_gr; 123 __u16 avg_bg_br; 124 __u32 num_pixels; 125} __attribute__((packed)); 126 127/** 128 * struct mali_c55_af_statistics - Auto Focus edge and intensity statistics 129 * 130 * @intensity_stats: Packed mantissa and exponent value for pixel intensity 131 * @edge_stats: Packed mantissa and exponent values for edge intensity 132 * 133 * The ISP collects the squared sum of pixel intensities for each zone within a 134 * configurable Region of Interest on the frame. Additionally, the same data are 135 * collected after being passed through a bandpass filter which removes high and 136 * low frequency components - these are referred to as the edge statistics. 137 * 138 * The intensity and edge statistics for a zone can be used to calculate the 139 * contrast information for a zone 140 * 141 * C = E2 / I2 142 * 143 * Where I2 is the intensity statistic for a zone and E2 is the edge statistic 144 * for that zone. Optimum focus is reached when C is at its maximum. 145 * 146 * The intensity and edge statistics are stored packed into a non-standard 16 147 * bit floating point format, where the 7 most significant bits represent the 148 * exponent and the 9 least significant bits the mantissa. This format can be 149 * unpacked with the following pseudocode:: 150 * 151 * if (e == 0) { 152 * x = m; 153 * } else { 154 * x = 2^e-1 * (m + 2^9) 155 * } 156 * 157 * where 158 * e is the exponent value in range 0..127 159 * m is the mantissa value in range 0..511 160 */ 161struct mali_c55_af_statistics { 162 __u16 intensity_stats; 163 __u16 edge_stats; 164} __attribute__((packed)); 165 166/** 167 * struct mali_c55_stats_buffer - 3A statistics for the mali-c55 ISP 168 * 169 * @ae_1024bin_hist: 1024-bin frame-global pixel intensity histogram 170 * @iridix_1024bin_hist: Post-Iridix block 1024-bin histogram 171 * @ae_5bin_hists: 5-bin pixel intensity histograms for AEC 172 * @reserved1: Undefined buffer space 173 * @awb_ratios: Color balance ratios for Auto White Balance 174 * @reserved2: Undefined buffer space 175 * @af_statistics: Pixel intensity statistics for Auto Focus 176 * @reserved3: Undefined buffer space 177 * 178 * This struct describes the metering statistics space in the Mali-C55 ISP's 179 * hardware in its entirety. The space between each defined area is marked as 180 * "unknown" and may not be 0, but should not be used. The @ae_5bin_hists, 181 * @awb_ratios and @af_statistics members are arrays of statistics per-zone. 182 * The zones are arranged in the array in raster order starting from the top 183 * left corner of the image. 184 */ 185 186struct mali_c55_stats_buffer { 187 struct mali_c55_ae_1024bin_hist ae_1024bin_hist; 188 struct mali_c55_ae_1024bin_hist iridix_1024bin_hist; 189 struct mali_c55_ae_5bin_hist ae_5bin_hists[MALI_C55_MAX_ZONES]; 190 __u32 reserved1[14]; 191 struct mali_c55_awb_average_ratios awb_ratios[MALI_C55_MAX_ZONES]; 192 __u32 reserved2[14]; 193 struct mali_c55_af_statistics af_statistics[MALI_C55_MAX_ZONES]; 194 __u32 reserved3[15]; 195} __attribute__((packed)); 196 197/** 198 * enum mali_c55_param_block_type - Enumeration of Mali-C55 parameter blocks 199 * 200 * This enumeration defines the types of Mali-C55 parameters block. Each block 201 * configures a specific processing block of the Mali-C55 ISP. The block 202 * type allows the driver to correctly interpret the parameters block data. 203 * 204 * It is the responsibility of userspace to correctly set the type of each 205 * parameters block. 206 * 207 * @MALI_C55_PARAM_BLOCK_SENSOR_OFFS: Sensor pre-shading black level offset 208 * @MALI_C55_PARAM_BLOCK_AEXP_HIST: Auto-exposure 1024-bin histogram 209 * configuration 210 * @MALI_C55_PARAM_BLOCK_AEXP_IHIST: Post-Iridix auto-exposure 1024-bin 211 * histogram configuration 212 * @MALI_C55_PARAM_BLOCK_AEXP_HIST_WEIGHTS: Auto-exposure 1024-bin histogram 213 * weighting 214 * @MALI_C55_PARAM_BLOCK_AEXP_IHIST_WEIGHTS: Post-Iridix auto-exposure 1024-bin 215 * histogram weighting 216 * @MALI_C55_PARAM_BLOCK_DIGITAL_GAIN: Digital gain 217 * @MALI_C55_PARAM_BLOCK_AWB_GAINS: Auto-white balance gains 218 * @MALI_C55_PARAM_BLOCK_AWB_CONFIG: Auto-white balance statistics config 219 * @MALI_C55_PARAM_BLOCK_AWB_GAINS_AEXP: Auto-white balance gains for AEXP-0 tap 220 * @MALI_C55_PARAM_MESH_SHADING_CONFIG : Mesh shading tables configuration 221 * @MALI_C55_PARAM_MESH_SHADING_SELECTION: Mesh shading table selection 222 */ 223enum mali_c55_param_block_type { 224 MALI_C55_PARAM_BLOCK_SENSOR_OFFS, 225 MALI_C55_PARAM_BLOCK_AEXP_HIST, 226 MALI_C55_PARAM_BLOCK_AEXP_IHIST, 227 MALI_C55_PARAM_BLOCK_AEXP_HIST_WEIGHTS, 228 MALI_C55_PARAM_BLOCK_AEXP_IHIST_WEIGHTS, 229 MALI_C55_PARAM_BLOCK_DIGITAL_GAIN, 230 MALI_C55_PARAM_BLOCK_AWB_GAINS, 231 MALI_C55_PARAM_BLOCK_AWB_CONFIG, 232 MALI_C55_PARAM_BLOCK_AWB_GAINS_AEXP, 233 MALI_C55_PARAM_MESH_SHADING_CONFIG, 234 MALI_C55_PARAM_MESH_SHADING_SELECTION, 235}; 236 237/** 238 * struct mali_c55_params_sensor_off_preshading - offset subtraction for each 239 * color channel 240 * 241 * Provides removal of the sensor black level from the sensor data. Separate 242 * offsets are provided for each of the four Bayer component color channels 243 * which are defaulted to R, Gr, Gb, B. 244 * 245 * header.type should be set to MALI_C55_PARAM_BLOCK_SENSOR_OFFS from 246 * :c:type:`mali_c55_param_block_type` for this block. 247 * 248 * @header: The Mali-C55 parameters block header 249 * @chan00: Offset for color channel 00 (default: R) 250 * @chan01: Offset for color channel 01 (default: Gr) 251 * @chan10: Offset for color channel 10 (default: Gb) 252 * @chan11: Offset for color channel 11 (default: B) 253 */ 254struct mali_c55_params_sensor_off_preshading { 255 struct v4l2_isp_params_block_header header; 256 __u32 chan00; 257 __u32 chan01; 258 __u32 chan10; 259 __u32 chan11; 260}; 261 262/** 263 * enum mali_c55_aexp_hist_tap_points - Tap points for the AEXP histogram 264 * @MALI_C55_AEXP_HIST_TAP_WB: After static white balance 265 * @MALI_C55_AEXP_HIST_TAP_FS: After WDR Frame Stitch 266 * @MALI_C55_AEXP_HIST_TAP_TPG: After the test pattern generator 267 */ 268enum mali_c55_aexp_hist_tap_points { 269 MALI_C55_AEXP_HIST_TAP_WB = 0, 270 MALI_C55_AEXP_HIST_TAP_FS, 271 MALI_C55_AEXP_HIST_TAP_TPG, 272}; 273 274/** 275 * enum mali_c55_aexp_skip_x - Horizontal pixel skipping 276 * @MALI_C55_AEXP_SKIP_X_EVERY_2ND: Collect every 2nd pixel horizontally 277 * @MALI_C55_AEXP_SKIP_X_EVERY_3RD: Collect every 3rd pixel horizontally 278 * @MALI_C55_AEXP_SKIP_X_EVERY_4TH: Collect every 4th pixel horizontally 279 * @MALI_C55_AEXP_SKIP_X_EVERY_5TH: Collect every 5th pixel horizontally 280 * @MALI_C55_AEXP_SKIP_X_EVERY_8TH: Collect every 8th pixel horizontally 281 * @MALI_C55_AEXP_SKIP_X_EVERY_9TH: Collect every 9th pixel horizontally 282 */ 283enum mali_c55_aexp_skip_x { 284 MALI_C55_AEXP_SKIP_X_EVERY_2ND, 285 MALI_C55_AEXP_SKIP_X_EVERY_3RD, 286 MALI_C55_AEXP_SKIP_X_EVERY_4TH, 287 MALI_C55_AEXP_SKIP_X_EVERY_5TH, 288 MALI_C55_AEXP_SKIP_X_EVERY_8TH, 289 MALI_C55_AEXP_SKIP_X_EVERY_9TH 290}; 291 292/** 293 * enum mali_c55_aexp_skip_y - Vertical pixel skipping 294 * @MALI_C55_AEXP_SKIP_Y_ALL: Collect every single pixel vertically 295 * @MALI_C55_AEXP_SKIP_Y_EVERY_2ND: Collect every 2nd pixel vertically 296 * @MALI_C55_AEXP_SKIP_Y_EVERY_3RD: Collect every 3rd pixel vertically 297 * @MALI_C55_AEXP_SKIP_Y_EVERY_4TH: Collect every 4th pixel vertically 298 * @MALI_C55_AEXP_SKIP_Y_EVERY_5TH: Collect every 5th pixel vertically 299 * @MALI_C55_AEXP_SKIP_Y_EVERY_8TH: Collect every 8th pixel vertically 300 * @MALI_C55_AEXP_SKIP_Y_EVERY_9TH: Collect every 9th pixel vertically 301 */ 302enum mali_c55_aexp_skip_y { 303 MALI_C55_AEXP_SKIP_Y_ALL, 304 MALI_C55_AEXP_SKIP_Y_EVERY_2ND, 305 MALI_C55_AEXP_SKIP_Y_EVERY_3RD, 306 MALI_C55_AEXP_SKIP_Y_EVERY_4TH, 307 MALI_C55_AEXP_SKIP_Y_EVERY_5TH, 308 MALI_C55_AEXP_SKIP_Y_EVERY_8TH, 309 MALI_C55_AEXP_SKIP_Y_EVERY_9TH 310}; 311 312/** 313 * enum mali_c55_aexp_row_column_offset - Start from the first or second row or 314 * column 315 * @MALI_C55_AEXP_FIRST_ROW_OR_COL: Start from the first row / column 316 * @MALI_C55_AEXP_SECOND_ROW_OR_COL: Start from the second row / column 317 */ 318enum mali_c55_aexp_row_column_offset { 319 MALI_C55_AEXP_FIRST_ROW_OR_COL = 1, 320 MALI_C55_AEXP_SECOND_ROW_OR_COL = 2, 321}; 322 323/** 324 * enum mali_c55_aexp_hist_plane_mode - Mode for the AEXP Histograms 325 * @MALI_C55_AEXP_HIST_COMBINED: All color planes in one 1024-bin histogram 326 * @MALI_C55_AEXP_HIST_SEPARATE: Each color plane in one 256-bin histogram with a bin width of 16 327 * @MALI_C55_AEXP_HIST_FOCUS_00: Top left plane in the first bank, rest in second bank 328 * @MALI_C55_AEXP_HIST_FOCUS_01: Top right plane in the first bank, rest in second bank 329 * @MALI_C55_AEXP_HIST_FOCUS_10: Bottom left plane in the first bank, rest in second bank 330 * @MALI_C55_AEXP_HIST_FOCUS_11: Bottom right plane in the first bank, rest in second bank 331 * 332 * In the "focus" modes statistics are collected into two 512-bin histograms 333 * with a bin width of 8. One colour plane is in the first histogram with the 334 * remainder combined into the second. The four options represent which of the 335 * four positions in a bayer pattern are the focused plane. 336 */ 337enum mali_c55_aexp_hist_plane_mode { 338 MALI_C55_AEXP_HIST_COMBINED = 0, 339 MALI_C55_AEXP_HIST_SEPARATE = 1, 340 MALI_C55_AEXP_HIST_FOCUS_00 = 4, 341 MALI_C55_AEXP_HIST_FOCUS_01 = 5, 342 MALI_C55_AEXP_HIST_FOCUS_10 = 6, 343 MALI_C55_AEXP_HIST_FOCUS_11 = 7, 344}; 345 346/** 347 * struct mali_c55_params_aexp_hist - configuration for AEXP metering hists 348 * 349 * This struct allows users to configure the 1024-bin AEXP histograms. Broadly 350 * speaking the parameters allow you to mask particular regions of the image and 351 * to select different kinds of histogram. 352 * 353 * The skip_x, offset_x, skip_y and offset_y fields allow users to ignore or 354 * mask pixels in the frame by their position relative to the top left pixel. 355 * First, the skip_y, offset_x and offset_y fields define which of the pixels 356 * within each 2x2 region will be counted in the statistics. 357 * 358 * If skip_y == 0 then two pixels from each covered region will be counted. If 359 * both offset_x and offset_y are zero, then the two left-most pixels in each 360 * 2x2 pixel region will be counted. Setting offset_x = 1 will discount the top 361 * left pixel and count the top right pixel. Setting offset_y = 1 will discount 362 * the bottom left pixel and count the bottom right pixel. 363 * 364 * If skip_y != 0 then only a single pixel from each region covered by the 365 * pattern will be counted. In this case offset_x controls whether the pixel 366 * that's counted is in the left (if offset_x == 0) or right (if offset_x == 1) 367 * column and offset_y controls whether the pixel that's counted is in the top 368 * (if offset_y == 0) or bottom (if offset_y == 1) row. 369 * 370 * The skip_x and skip_y fields control how the 2x2 pixel region is repeated 371 * across the image data. The first instance of the region is always in the top 372 * left of the image data. The skip_x field controls how many pixels are ignored 373 * in the x direction before the pixel masking region is repeated. The skip_y 374 * field controls how many pixels are ignored in the y direction before the 375 * pixel masking region is repeated. 376 * 377 * These fields can be used to reduce the number of pixels counted for the 378 * statistics, but it's important to be careful to configure them correctly. 379 * Some combinations of values will result in colour components from the input 380 * data being ignored entirely, for example in the following configuration: 381 * 382 * skip_x = 0 383 * offset_x = 0 384 * skip_y = 0 385 * offset_y = 0 386 * 387 * Only the R and Gb components of RGGB data that was input would be collected. 388 * Similarly in the following configuration: 389 * 390 * skip_x = 0 391 * offset_x = 0 392 * skip_y = 1 393 * offset_y = 1 394 * 395 * Only the Gb component of RGGB data that was input would be collected. To 396 * correct things such that all 4 colour components were included it would be 397 * necessary to set the skip_x and skip_y fields in a way that resulted in all 398 * four colour components being collected: 399 * 400 * skip_x = 1 401 * offset_x = 0 402 * skip_y = 1 403 * offset_y = 1 404 * 405 * header.type should be set to one of either MALI_C55_PARAM_BLOCK_AEXP_HIST or 406 * MALI_C55_PARAM_BLOCK_AEXP_IHIST from :c:type:`mali_c55_param_block_type`. 407 * 408 * @header: The Mali-C55 parameters block header 409 * @skip_x: Horizontal decimation. See enum mali_c55_aexp_skip_x 410 * @offset_x: Skip the first column, or not. See enum mali_c55_aexp_row_column_offset 411 * @skip_y: Vertical decimation. See enum mali_c55_aexp_skip_y 412 * @offset_y: Skip the first row, or not. See enum mali_c55_aexp_row_column_offset 413 * @scale_bottom: Scale pixels in bottom half of intensity range: 0=1x ,1=2x, 2=4x, 4=8x, 4=16x 414 * @scale_top: scale pixels in top half of intensity range: 0=1x ,1=2x, 2=4x, 4=8x, 4=16x 415 * @plane_mode: Plane separation mode. See enum mali_c55_aexp_hist_plane_mode 416 * @tap_point: Tap point for histogram from enum mali_c55_aexp_hist_tap_points. 417 * This parameter is unused for the post-Iridix Histogram 418 */ 419struct mali_c55_params_aexp_hist { 420 struct v4l2_isp_params_block_header header; 421 __u8 skip_x; 422 __u8 offset_x; 423 __u8 skip_y; 424 __u8 offset_y; 425 __u8 scale_bottom; 426 __u8 scale_top; 427 __u8 plane_mode; 428 __u8 tap_point; 429}; 430 431/** 432 * struct mali_c55_params_aexp_weights - Array of weights for AEXP metering 433 * 434 * This struct allows users to configure the weighting for both of the 1024-bin 435 * AEXP histograms. The pixel data collected for each zone is multiplied by the 436 * corresponding weight from this array, which may be zero if the intention is 437 * to mask off the zone entirely. 438 * 439 * header.type should be set to one of either MALI_C55_PARAM_BLOCK_AEXP_HIST_WEIGHTS 440 * or MALI_C55_PARAM_BLOCK_AEXP_IHIST_WEIGHTS from :c:type:`mali_c55_param_block_type`. 441 * 442 * @header: The Mali-C55 parameters block header 443 * @nodes_used_horiz: Number of active zones horizontally [0..15] 444 * @nodes_used_vert: Number of active zones vertically [0..15] 445 * @zone_weights: Zone weighting. Index is row*col where 0,0 is the top 446 * left zone continuing in raster order. Each zone can be 447 * weighted in the range [0..15]. The number of rows and 448 * columns is defined by @nodes_used_vert and 449 * @nodes_used_horiz 450 */ 451struct mali_c55_params_aexp_weights { 452 struct v4l2_isp_params_block_header header; 453 __u8 nodes_used_horiz; 454 __u8 nodes_used_vert; 455 __u8 zone_weights[MALI_C55_MAX_ZONES]; 456}; 457 458/** 459 * struct mali_c55_params_digital_gain - Digital gain value 460 * 461 * This struct carries a digital gain value to set in the ISP. 462 * 463 * header.type should be set to MALI_C55_PARAM_BLOCK_DIGITAL_GAIN from 464 * :c:type:`mali_c55_param_block_type` for this block. 465 * 466 * @header: The Mali-C55 parameters block header 467 * @gain: The digital gain value to apply, in Q5.8 format. 468 */ 469struct mali_c55_params_digital_gain { 470 struct v4l2_isp_params_block_header header; 471 __u16 gain; 472}; 473 474/** 475 * enum mali_c55_awb_stats_mode - Statistics mode for AWB 476 * @MALI_C55_AWB_MODE_GRBR: Statistics collected as Green/Red and Blue/Red ratios 477 * @MALI_C55_AWB_MODE_RGBG: Statistics collected as Red/Green and Blue/Green ratios 478 */ 479enum mali_c55_awb_stats_mode { 480 MALI_C55_AWB_MODE_GRBR = 0, 481 MALI_C55_AWB_MODE_RGBG, 482}; 483 484/** 485 * struct mali_c55_params_awb_gains - Gain settings for auto white balance 486 * 487 * This struct allows users to configure the gains for auto-white balance. There 488 * are four gain settings corresponding to each colour channel in the bayer 489 * domain. Although named generically, the association between the gain applied 490 * and the colour channel is done automatically within the ISP depending on the 491 * input format, and so the following mapping always holds true:: 492 * 493 * gain00 = R 494 * gain01 = Gr 495 * gain10 = Gb 496 * gain11 = B 497 * 498 * All of the gains are stored in Q4.8 format. 499 * 500 * header.type should be set to one of either MALI_C55_PARAM_BLOCK_AWB_GAINS or 501 * MALI_C55_PARAM_BLOCK_AWB_GAINS_AEXP from :c:type:`mali_c55_param_block_type`. 502 * 503 * @header: The Mali-C55 parameters block header 504 * @gain00: Multiplier for colour channel 00 505 * @gain01: Multiplier for colour channel 01 506 * @gain10: Multiplier for colour channel 10 507 * @gain11: Multiplier for colour channel 11 508 */ 509struct mali_c55_params_awb_gains { 510 struct v4l2_isp_params_block_header header; 511 __u16 gain00; 512 __u16 gain01; 513 __u16 gain10; 514 __u16 gain11; 515}; 516 517/** 518 * enum mali_c55_params_awb_tap_points - Tap points for the AWB statistics 519 * @MALI_C55_AWB_STATS_TAP_PF: Immediately after the Purple Fringe block 520 * @MALI_C55_AWB_STATS_TAP_CNR: Immediately after the CNR block 521 */ 522enum mali_c55_params_awb_tap_points { 523 MALI_C55_AWB_STATS_TAP_PF = 0, 524 MALI_C55_AWB_STATS_TAP_CNR, 525}; 526 527/** 528 * struct mali_c55_params_awb_config - Stats settings for auto-white balance 529 * 530 * This struct allows the configuration of the statistics generated for auto 531 * white balance. Pixel intensity limits can be set to exclude overly bright or 532 * dark regions of an image from the statistics entirely. Colour ratio minima 533 * and maxima can be set to discount pixels who's ratios fall outside the 534 * defined boundaries; there are two sets of registers to do this - the 535 * "min/max" ratios which bound a region and the "high/low" ratios which further 536 * trim the upper and lower ratios. For example with the boundaries configured 537 * as follows, only pixels whos colour ratios falls into the region marked "A" 538 * would be counted:: 539 * 540 * cr_high 541 * 2.0 | | 542 * | cb_max --> _________________________v_____ 543 * 1.8 | | \ | 544 * | | \ | 545 * 1.6 | | \ | 546 * | | \ | 547 * c 1.4 | cb_low -->|\ A \|<-- cb_high 548 * b | | \ | 549 * 1.2 | | \ | 550 * r | | \ | 551 * a 1.0 | cb_min --> |____\_________________________| 552 * t | ^ ^ ^ 553 * i 0.8 | | | | 554 * o | cr_min | cr_max 555 * s 0.6 | | 556 * | cr_low 557 * 0.4 | 558 * | 559 * 0.2 | 560 * | 561 * 0.0 |_______________________________________________________________ 562 * 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 563 * cr ratios 564 * 565 * header.type should be set to MALI_C55_PARAM_BLOCK_AWB_CONFIG from 566 * :c:type:`mali_c55_param_block_type` for this block. 567 * 568 * @header: The Mali-C55 parameters block header 569 * @tap_point: The tap point from enum mali_c55_params_awb_tap_points 570 * @stats_mode: AWB statistics collection mode, see :c:type:`mali_c55_awb_stats_mode` 571 * @white_level: Upper pixel intensity (I.E. raw pixel values) limit 572 * @black_level: Lower pixel intensity (I.E. raw pixel values) limit 573 * @cr_max: Maximum R/G ratio (Q4.8 format) 574 * @cr_min: Minimum R/G ratio (Q4.8 format) 575 * @cb_max: Maximum B/G ratio (Q4.8 format) 576 * @cb_min: Minimum B/G ratio (Q4.8 format) 577 * @nodes_used_horiz: Number of active zones horizontally [0..15] 578 * @nodes_used_vert: Number of active zones vertically [0..15] 579 * @cr_high: R/G ratio trim high (Q4.8 format) 580 * @cr_low: R/G ratio trim low (Q4.8 format) 581 * @cb_high: B/G ratio trim high (Q4.8 format) 582 * @cb_low: B/G ratio trim low (Q4.8 format) 583 */ 584struct mali_c55_params_awb_config { 585 struct v4l2_isp_params_block_header header; 586 __u8 tap_point; 587 __u8 stats_mode; 588 __u16 white_level; 589 __u16 black_level; 590 __u16 cr_max; 591 __u16 cr_min; 592 __u16 cb_max; 593 __u16 cb_min; 594 __u8 nodes_used_horiz; 595 __u8 nodes_used_vert; 596 __u16 cr_high; 597 __u16 cr_low; 598 __u16 cb_high; 599 __u16 cb_low; 600}; 601 602#define MALI_C55_NUM_MESH_SHADING_ELEMENTS 3072 603 604/** 605 * struct mali_c55_params_mesh_shading_config - Mesh shading configuration 606 * 607 * The mesh shading correction module allows programming a separate table of 608 * either 16x16 or 32x32 node coefficients for 3 different light sources. The 609 * final correction coefficients applied are computed by blending the 610 * coefficients from two tables together. 611 * 612 * A page of 1024 32-bit integers is associated to each colour channel, with 613 * pages stored consecutively in memory. Each 32-bit integer packs 3 8-bit 614 * correction coefficients for a single node, one for each of the three light 615 * sources. The 8 most significant bits are unused. The following table 616 * describes the layout:: 617 * 618 * +----------- Page (Colour Plane) 0 -------------+ 619 * | @mesh[i] | Mesh Point | Bits | Light Source | 620 * +-----------+------------+-------+--------------+ 621 * | 0 | 0,0 | 16,23 | LS2 | 622 * | | | 08-15 | LS1 | 623 * | | | 00-07 | LS0 | 624 * +-----------+------------+-------+--------------+ 625 * | 1 | 0,1 | 16,23 | LS2 | 626 * | | | 08-15 | LS1 | 627 * | | | 00-07 | LS0 | 628 * +-----------+------------+-------+--------------+ 629 * | ... | ... | ... | ... | 630 * +-----------+------------+-------+--------------+ 631 * | 1023 | 31,31 | 16,23 | LS2 | 632 * | | | 08-15 | LS1 | 633 * | | | 00-07 | LS0 | 634 * +----------- Page (Colour Plane) 1 -------------+ 635 * | @mesh[i] | Mesh Point | Bits | Light Source | 636 * +-----------+------------+-------+--------------+ 637 * | 1024 | 0,0 | 16,23 | LS2 | 638 * | | | 08-15 | LS1 | 639 * | | | 00-07 | LS0 | 640 * +-----------+------------+-------+--------------+ 641 * | 1025 | 0,1 | 16,23 | LS2 | 642 * | | | 08-15 | LS1 | 643 * | | | 00-07 | LS0 | 644 * +-----------+------------+-------+--------------+ 645 * | ... | ... | ... | ... | 646 * +-----------+------------+-------+--------------+ 647 * | 2047 | 31,31 | 16,23 | LS2 | 648 * | | | 08-15 | LS1 | 649 * | | | 00-07 | LS0 | 650 * +----------- Page (Colour Plane) 2 -------------+ 651 * | @mesh[i] | Mesh Point | Bits | Light Source | 652 * +-----------+------------+-------+--------------+ 653 * | 2048 | 0,0 | 16,23 | LS2 | 654 * | | | 08-15 | LS1 | 655 * | | | 00-07 | LS0 | 656 * +-----------+------------+-------+--------------+ 657 * | 2049 | 0,1 | 16,23 | LS2 | 658 * | | | 08-15 | LS1 | 659 * | | | 00-07 | LS0 | 660 * +-----------+------------+-------+--------------+ 661 * | ... | ... | ... | ... | 662 * +-----------+------------+-------+--------------+ 663 * | 3071 | 31,31 | 16,23 | LS2 | 664 * | | | 08-15 | LS1 | 665 * | | | 00-07 | LS0 | 666 * +-----------+------------+-------+--------------+ 667 * 668 * The @mesh_scale member determines the precision and minimum and maximum gain. 669 * For example if @mesh_scale is 0 and therefore selects 0 - 2x gain, a value of 670 * 0 in a coefficient means 0.0 gain, a value of 128 means 1.0 gain and 255 671 * means 2.0 gain. 672 * 673 * header.type should be set to MALI_C55_PARAM_MESH_SHADING_CONFIG from 674 * :c:type:`mali_c55_param_block_type` for this block. 675 * 676 * @header: The Mali-C55 parameters block header 677 * @mesh_show: Output the mesh data rather than image data 678 * @mesh_scale: Set the precision and maximum gain range of mesh shading 679 * - 0 = 0-2x gain 680 * - 1 = 0-4x gain 681 * - 2 = 0-8x gain 682 * - 3 = 0-16x gain 683 * - 4 = 1-2x gain 684 * - 5 = 1-3x gain 685 * - 6 = 1-5x gain 686 * - 7 = 1-9x gain 687 * @mesh_page_r: Mesh page select for red colour plane [0..2] 688 * @mesh_page_g: Mesh page select for green colour plane [0..2] 689 * @mesh_page_b: Mesh page select for blue colour plane [0..2] 690 * @mesh_width: Number of horizontal nodes minus 1 [15,31] 691 * @mesh_height: Number of vertical nodes minus 1 [15,31] 692 * @mesh: Mesh shading correction tables 693 */ 694struct mali_c55_params_mesh_shading_config { 695 struct v4l2_isp_params_block_header header; 696 __u8 mesh_show; 697 __u8 mesh_scale; 698 __u8 mesh_page_r; 699 __u8 mesh_page_g; 700 __u8 mesh_page_b; 701 __u8 mesh_width; 702 __u8 mesh_height; 703 __u32 mesh[MALI_C55_NUM_MESH_SHADING_ELEMENTS]; 704}; 705 706/** enum mali_c55_params_mesh_alpha_bank - Mesh shading table bank selection 707 * @MALI_C55_MESH_ALPHA_BANK_LS0_AND_LS1 - Select Light Sources 0 and 1 708 * @MALI_C55_MESH_ALPHA_BANK_LS1_AND_LS2 - Select Light Sources 1 and 2 709 * @MALI_C55_MESH_ALPHA_BANK_LS0_AND_LS2 - Select Light Sources 0 and 2 710 */ 711enum mali_c55_params_mesh_alpha_bank { 712 MALI_C55_MESH_ALPHA_BANK_LS0_AND_LS1 = 0, 713 MALI_C55_MESH_ALPHA_BANK_LS1_AND_LS2 = 1, 714 MALI_C55_MESH_ALPHA_BANK_LS0_AND_LS2 = 4 715}; 716 717/** 718 * struct mali_c55_params_mesh_shading_selection - Mesh table selection 719 * 720 * The module computes the final correction coefficients by blending the ones 721 * from two light source tables, which are selected (independently for each 722 * colour channel) by the @mesh_alpha_bank_r/g/b fields. 723 * 724 * The final blended coefficients for each node are calculated using the 725 * following equation: 726 * 727 * Final coefficient = (a * LS\ :sub:`b`\ + (256 - a) * LS\ :sub:`a`\) / 256 728 * 729 * Where a is the @mesh_alpha_r/g/b value, and LS\ :sub:`a`\ and LS\ :sub:`b`\ 730 * are the node cofficients for the two tables selected by the 731 * @mesh_alpha_bank_r/g/b value. 732 * 733 * The scale of the applied correction may also be controlled by tuning the 734 * @mesh_strength member. This is a modifier to the final coefficients which can 735 * be used to globally reduce the gains applied. 736 * 737 * header.type should be set to MALI_C55_PARAM_MESH_SHADING_SELECTION from 738 * :c:type:`mali_c55_param_block_type` for this block. 739 * 740 * @header: The Mali-C55 parameters block header 741 * @mesh_alpha_bank_r: Red mesh table select (c:type:`enum mali_c55_params_mesh_alpha_bank`) 742 * @mesh_alpha_bank_g: Green mesh table select (c:type:`enum mali_c55_params_mesh_alpha_bank`) 743 * @mesh_alpha_bank_b: Blue mesh table select (c:type:`enum mali_c55_params_mesh_alpha_bank`) 744 * @mesh_alpha_r: Blend coefficient for R [0..255] 745 * @mesh_alpha_g: Blend coefficient for G [0..255] 746 * @mesh_alpha_b: Blend coefficient for B [0..255] 747 * @mesh_strength: Mesh strength in Q4.12 format [0..4096] 748 */ 749struct mali_c55_params_mesh_shading_selection { 750 struct v4l2_isp_params_block_header header; 751 __u8 mesh_alpha_bank_r; 752 __u8 mesh_alpha_bank_g; 753 __u8 mesh_alpha_bank_b; 754 __u8 mesh_alpha_r; 755 __u8 mesh_alpha_g; 756 __u8 mesh_alpha_b; 757 __u16 mesh_strength; 758}; 759 760/** 761 * define MALI_C55_PARAMS_MAX_SIZE - Maximum size of all Mali C55 Parameters 762 * 763 * Though the parameters for the Mali-C55 are passed as optional blocks, the 764 * driver still needs to know the absolute maximum size so that it can allocate 765 * a buffer sized appropriately to accommodate userspace attempting to set all 766 * possible parameters in a single frame. 767 * 768 * Some structs are in this list multiple times. Where that's the case, it just 769 * reflects the fact that the same struct can be used with multiple different 770 * header types from :c:type:`mali_c55_param_block_type`. 771 */ 772#define MALI_C55_PARAMS_MAX_SIZE \ 773 (sizeof(struct mali_c55_params_sensor_off_preshading) + \ 774 sizeof(struct mali_c55_params_aexp_hist) + \ 775 sizeof(struct mali_c55_params_aexp_weights) + \ 776 sizeof(struct mali_c55_params_aexp_hist) + \ 777 sizeof(struct mali_c55_params_aexp_weights) + \ 778 sizeof(struct mali_c55_params_digital_gain) + \ 779 sizeof(struct mali_c55_params_awb_gains) + \ 780 sizeof(struct mali_c55_params_awb_config) + \ 781 sizeof(struct mali_c55_params_awb_gains) + \ 782 sizeof(struct mali_c55_params_mesh_shading_config) + \ 783 sizeof(struct mali_c55_params_mesh_shading_selection)) 784 785#endif /* __UAPI_MALI_C55_CONFIG_H */
~/
Read-only file preview.