File Index
Files and directories
Sign in
FILE

gpio-regulator.h

File preview with syntax highlighting.

linux-6.19.14/include/linux/regulator/gpio-regulator.h C
 1/* SPDX-License-Identifier: GPL-2.0-or-later */
 2/*
 3 * gpio-regulator.h
 4 *
 5 * Copyright 2011 Heiko Stuebner <heiko@sntech.de>
 6 *
 7 * based on fixed.h
 8 *
 9 * Copyright 2008 Wolfson Microelectronics PLC.
10 *
11 * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
12 *
13 * Copyright (c) 2009 Nokia Corporation
14 * Roger Quadros <ext-roger.quadros@nokia.com>
15 */
16
17#ifndef __REGULATOR_GPIO_H
18#define __REGULATOR_GPIO_H
19
20#include <linux/gpio/consumer.h>
21
22struct regulator_init_data;
23
24enum regulator_type;
25
26/**
27 * struct gpio_regulator_state - state description
28 * @value:		microvolts or microamps
29 * @gpios:		bitfield of gpio target-states for the value
30 *
31 * This structure describes a supported setting of the regulator
32 * and the necessary gpio-state to achieve it.
33 *
34 * The n-th bit in the bitfield describes the state of the n-th GPIO
35 * from the gpios-array defined in gpio_regulator_config below.
36 */
37struct gpio_regulator_state {
38	int value;
39	int gpios;
40};
41
42/**
43 * struct gpio_regulator_config - config structure
44 * @supply_name:	Name of the regulator supply
45 * @input_supply:	Name of the input regulator supply
46 * @enabled_at_boot:	Whether regulator has been enabled at
47 *			boot or not. 1 = Yes, 0 = No
48 *			This is used to keep the regulator at
49 *			the default state
50 * @startup_delay:	Start-up time in microseconds
51 * @gflags:		Array of GPIO configuration flags for initial
52 *			states
53 * @ngpios:		Number of GPIOs and configurations available
54 * @states:		Array of gpio_regulator_state entries describing
55 *			the gpio state for specific voltages
56 * @nr_states:		Number of states available
57 * @regulator_type:	either REGULATOR_CURRENT or REGULATOR_VOLTAGE
58 * @init_data:		regulator_init_data
59 *
60 * This structure contains gpio-voltage regulator configuration
61 * information that must be passed by platform code to the
62 * gpio-voltage regulator driver.
63 */
64struct gpio_regulator_config {
65	const char *supply_name;
66	const char *input_supply;
67
68	unsigned enabled_at_boot:1;
69	unsigned startup_delay;
70
71	enum gpiod_flags *gflags;
72	int ngpios;
73
74	struct gpio_regulator_state *states;
75	int nr_states;
76
77	enum regulator_type type;
78	struct regulator_init_data *init_data;
79};
80
81#endif
~/ Read-only file preview.