File Index
Files and directories
Sign in
FILE

stmpe.h

File preview with syntax highlighting.

linux-6.19.14/include/linux/mfd/stmpe.h C
  1/* SPDX-License-Identifier: GPL-2.0-only */
  2/*
  3 * Copyright (C) ST-Ericsson SA 2010
  4 *
  5 * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
  6 */
  7
  8#ifndef __LINUX_MFD_STMPE_H
  9#define __LINUX_MFD_STMPE_H
 10
 11#include <linux/mutex.h>
 12
 13#define STMPE_SAMPLE_TIME(x)	((x & 0xf) << 4)
 14#define STMPE_MOD_12B(x)	((x & 0x1) << 3)
 15#define STMPE_REF_SEL(x)	((x & 0x1) << 1)
 16#define STMPE_ADC_FREQ(x)	(x & 0x3)
 17#define STMPE_AVE_CTRL(x)	((x & 0x3) << 6)
 18#define STMPE_DET_DELAY(x)	((x & 0x7) << 3)
 19#define STMPE_SETTLING(x)	(x & 0x7)
 20#define STMPE_FRACTION_Z(x)	(x & 0x7)
 21#define STMPE_I_DRIVE(x)	(x & 0x1)
 22#define STMPE_OP_MODE(x)	((x & 0x7) << 1)
 23
 24#define STMPE811_REG_ADC_CTRL1	0x20
 25#define STMPE811_REG_ADC_CTRL2	0x21
 26
 27struct device;
 28struct regulator;
 29
 30enum stmpe_block {
 31	STMPE_BLOCK_GPIO	= 1 << 0,
 32	STMPE_BLOCK_KEYPAD	= 1 << 1,
 33	STMPE_BLOCK_TOUCHSCREEN	= 1 << 2,
 34	STMPE_BLOCK_ADC		= 1 << 3,
 35	STMPE_BLOCK_PWM		= 1 << 4,
 36	STMPE_BLOCK_ROTATOR	= 1 << 5,
 37};
 38
 39enum stmpe_partnum {
 40	STMPE610,
 41	STMPE801,
 42	STMPE811,
 43	STMPE1600,
 44	STMPE1601,
 45	STMPE1801,
 46	STMPE2401,
 47	STMPE2403,
 48	STMPE_NBR_PARTS
 49};
 50
 51/*
 52 * For registers whose locations differ on variants,  the correct address is
 53 * obtained by indexing stmpe->regs with one of the following.
 54 */
 55enum {
 56	STMPE_IDX_CHIP_ID,
 57	STMPE_IDX_SYS_CTRL,
 58	STMPE_IDX_SYS_CTRL2,
 59	STMPE_IDX_ICR_LSB,
 60	STMPE_IDX_IER_LSB,
 61	STMPE_IDX_IER_MSB,
 62	STMPE_IDX_ISR_LSB,
 63	STMPE_IDX_ISR_MSB,
 64	STMPE_IDX_GPMR_LSB,
 65	STMPE_IDX_GPMR_CSB,
 66	STMPE_IDX_GPMR_MSB,
 67	STMPE_IDX_GPSR_LSB,
 68	STMPE_IDX_GPSR_CSB,
 69	STMPE_IDX_GPSR_MSB,
 70	STMPE_IDX_GPCR_LSB,
 71	STMPE_IDX_GPCR_CSB,
 72	STMPE_IDX_GPCR_MSB,
 73	STMPE_IDX_GPDR_LSB,
 74	STMPE_IDX_GPDR_CSB,
 75	STMPE_IDX_GPDR_MSB,
 76	STMPE_IDX_GPEDR_LSB,
 77	STMPE_IDX_GPEDR_CSB,
 78	STMPE_IDX_GPEDR_MSB,
 79	STMPE_IDX_GPRER_LSB,
 80	STMPE_IDX_GPRER_CSB,
 81	STMPE_IDX_GPRER_MSB,
 82	STMPE_IDX_GPFER_LSB,
 83	STMPE_IDX_GPFER_CSB,
 84	STMPE_IDX_GPFER_MSB,
 85	STMPE_IDX_GPPUR_LSB,
 86	STMPE_IDX_GPPDR_LSB,
 87	STMPE_IDX_GPAFR_U_MSB,
 88	STMPE_IDX_IEGPIOR_LSB,
 89	STMPE_IDX_IEGPIOR_CSB,
 90	STMPE_IDX_IEGPIOR_MSB,
 91	STMPE_IDX_ISGPIOR_LSB,
 92	STMPE_IDX_ISGPIOR_CSB,
 93	STMPE_IDX_ISGPIOR_MSB,
 94	STMPE_IDX_MAX,
 95};
 96
 97
 98struct stmpe_variant_info;
 99struct stmpe_client_info;
100struct stmpe_platform_data;
101
102/**
103 * struct stmpe - STMPE MFD structure
104 * @vcc: optional VCC regulator
105 * @vio: optional VIO regulator
106 * @lock: lock protecting I/O operations
107 * @irq_lock: IRQ bus lock
108 * @dev: device, mostly for dev_dbg()
109 * @irq_domain: IRQ domain
110 * @client: client - i2c or spi
111 * @ci: client specific information
112 * @partnum: part number
113 * @variant: the detected STMPE model number
114 * @regs: list of addresses of registers which are at different addresses on
115 *	  different variants.  Indexed by one of STMPE_IDX_*.
116 * @irq: irq number for stmpe
117 * @num_gpios: number of gpios, differs for variants
118 * @ier: cache of IER registers for bus_lock
119 * @oldier: cache of IER registers for bus_lock
120 * @pdata: platform data
121 */
122struct stmpe {
123	struct regulator *vcc;
124	struct regulator *vio;
125	struct mutex lock;
126	struct mutex irq_lock;
127	struct device *dev;
128	struct irq_domain *domain;
129	void *client;
130	struct stmpe_client_info *ci;
131	enum stmpe_partnum partnum;
132	struct stmpe_variant_info *variant;
133	const u8 *regs;
134
135	int irq;
136	int num_gpios;
137	u8 ier[2];
138	u8 oldier[2];
139	struct stmpe_platform_data *pdata;
140
141	/* For devices that use an ADC */
142	u8 sample_time;
143	u8 mod_12b;
144	u8 ref_sel;
145	u8 adc_freq;
146};
147
148extern int stmpe_reg_write(struct stmpe *stmpe, u8 reg, u8 data);
149extern int stmpe_reg_read(struct stmpe *stmpe, u8 reg);
150extern int stmpe_block_read(struct stmpe *stmpe, u8 reg, u8 length,
151			    u8 *values);
152extern int stmpe_block_write(struct stmpe *stmpe, u8 reg, u8 length,
153			     const u8 *values);
154extern int stmpe_set_bits(struct stmpe *stmpe, u8 reg, u8 mask, u8 val);
155extern int stmpe_set_altfunc(struct stmpe *stmpe, u32 pins,
156			     enum stmpe_block block);
157extern int stmpe_enable(struct stmpe *stmpe, unsigned int blocks);
158extern int stmpe_disable(struct stmpe *stmpe, unsigned int blocks);
159extern int stmpe811_adc_common_init(struct stmpe *stmpe);
160
161#define STMPE_GPIO_NOREQ_811_TOUCH	(0xf0)
162
163#endif
~/ Read-only file preview.