FILE
iscsi_target_erl0.c
File preview with syntax highlighting.
linux-6.19.14/drivers/target/iscsi/iscsi_target_erl0.c
1// SPDX-License-Identifier: GPL-2.0-or-later 2/****************************************************************************** 3 * This file contains error recovery level zero functions used by 4 * the iSCSI Target driver. 5 * 6 * (c) Copyright 2007-2013 Datera, Inc. 7 * 8 * Author: Nicholas A. Bellinger <nab@linux-iscsi.org> 9 * 10 ******************************************************************************/ 11 12#include <linux/sched/signal.h> 13 14#include <scsi/iscsi_proto.h> 15#include <target/target_core_base.h> 16#include <target/target_core_fabric.h> 17 18#include <target/iscsi/iscsi_target_core.h> 19#include "iscsi_target_seq_pdu_list.h" 20#include "iscsi_target_erl0.h" 21#include "iscsi_target_erl1.h" 22#include "iscsi_target_erl2.h" 23#include "iscsi_target_util.h" 24#include "iscsi_target.h" 25 26/* 27 * Used to set values in struct iscsit_cmd that iscsit_dataout_check_sequence() 28 * checks against to determine a PDU's Offset+Length is within the current 29 * DataOUT Sequence. Used for DataSequenceInOrder=Yes only. 30 */ 31void iscsit_set_dataout_sequence_values( 32 struct iscsit_cmd *cmd) 33{ 34 struct iscsit_conn *conn = cmd->conn; 35 /* 36 * Still set seq_start_offset and seq_end_offset for Unsolicited 37 * DataOUT, even if DataSequenceInOrder=No. 38 */ 39 if (cmd->unsolicited_data) { 40 cmd->seq_start_offset = cmd->write_data_done; 41 cmd->seq_end_offset = min(cmd->se_cmd.data_length, 42 conn->sess->sess_ops->FirstBurstLength); 43 return; 44 } 45 46 if (!conn->sess->sess_ops->DataSequenceInOrder) 47 return; 48 49 if (!cmd->seq_start_offset && !cmd->seq_end_offset) { 50 cmd->seq_start_offset = cmd->write_data_done; 51 cmd->seq_end_offset = (cmd->se_cmd.data_length > 52 conn->sess->sess_ops->MaxBurstLength) ? 53 (cmd->write_data_done + 54 conn->sess->sess_ops->MaxBurstLength) : cmd->se_cmd.data_length; 55 } else { 56 cmd->seq_start_offset = cmd->seq_end_offset; 57 cmd->seq_end_offset = ((cmd->seq_end_offset + 58 conn->sess->sess_ops->MaxBurstLength) >= 59 cmd->se_cmd.data_length) ? cmd->se_cmd.data_length : 60 (cmd->seq_end_offset + 61 conn->sess->sess_ops->MaxBurstLength); 62 } 63} 64 65static int iscsit_dataout_within_command_recovery_check( 66 struct iscsit_cmd *cmd, 67 unsigned char *buf) 68{ 69 struct iscsit_conn *conn = cmd->conn; 70 struct iscsi_data *hdr = (struct iscsi_data *) buf; 71 u32 payload_length = ntoh24(hdr->dlength); 72 73 /* 74 * We do the within-command recovery checks here as it is 75 * the first function called in iscsi_check_pre_dataout(). 76 * Basically, if we are in within-command recovery and 77 * the PDU does not contain the offset the sequence needs, 78 * dump the payload. 79 * 80 * This only applies to DataPDUInOrder=Yes, for 81 * DataPDUInOrder=No we only re-request the failed PDU 82 * and check that all PDUs in a sequence are received 83 * upon end of sequence. 84 */ 85 if (conn->sess->sess_ops->DataSequenceInOrder) { 86 if ((cmd->cmd_flags & ICF_WITHIN_COMMAND_RECOVERY) && 87 cmd->write_data_done != be32_to_cpu(hdr->offset)) 88 goto dump; 89 90 cmd->cmd_flags &= ~ICF_WITHIN_COMMAND_RECOVERY; 91 } else { 92 struct iscsi_seq *seq; 93 94 seq = iscsit_get_seq_holder(cmd, be32_to_cpu(hdr->offset), 95 payload_length); 96 if (!seq) 97 return DATAOUT_CANNOT_RECOVER; 98 /* 99 * Set the struct iscsi_seq pointer to reuse later. 100 */ 101 cmd->seq_ptr = seq; 102 103 if (conn->sess->sess_ops->DataPDUInOrder) { 104 if (seq->status == 105 DATAOUT_SEQUENCE_WITHIN_COMMAND_RECOVERY && 106 (seq->offset != be32_to_cpu(hdr->offset) || 107 seq->data_sn != be32_to_cpu(hdr->datasn))) 108 goto dump; 109 } else { 110 if (seq->status == 111 DATAOUT_SEQUENCE_WITHIN_COMMAND_RECOVERY && 112 seq->data_sn != be32_to_cpu(hdr->datasn)) 113 goto dump; 114 } 115 116 if (seq->status == DATAOUT_SEQUENCE_COMPLETE) 117 goto dump; 118 119 if (seq->status != DATAOUT_SEQUENCE_COMPLETE) 120 seq->status = 0; 121 } 122 123 return DATAOUT_NORMAL; 124 125dump: 126 pr_err("Dumping DataOUT PDU Offset: %u Length: %d DataSN:" 127 " 0x%08x\n", hdr->offset, payload_length, hdr->datasn); 128 return iscsit_dump_data_payload(conn, payload_length, 1); 129} 130 131static int iscsit_dataout_check_unsolicited_sequence( 132 struct iscsit_cmd *cmd, 133 unsigned char *buf) 134{ 135 u32 first_burst_len; 136 struct iscsit_conn *conn = cmd->conn; 137 struct iscsi_data *hdr = (struct iscsi_data *) buf; 138 u32 payload_length = ntoh24(hdr->dlength); 139 140 141 if ((be32_to_cpu(hdr->offset) < cmd->seq_start_offset) || 142 ((be32_to_cpu(hdr->offset) + payload_length) > cmd->seq_end_offset)) { 143 pr_err("Command ITT: 0x%08x with Offset: %u," 144 " Length: %u outside of Unsolicited Sequence %u:%u while" 145 " DataSequenceInOrder=Yes.\n", cmd->init_task_tag, 146 be32_to_cpu(hdr->offset), payload_length, cmd->seq_start_offset, 147 cmd->seq_end_offset); 148 return DATAOUT_CANNOT_RECOVER; 149 } 150 151 first_burst_len = (cmd->first_burst_len + payload_length); 152 153 if (first_burst_len > conn->sess->sess_ops->FirstBurstLength) { 154 pr_err("Total %u bytes exceeds FirstBurstLength: %u" 155 " for this Unsolicited DataOut Burst.\n", 156 first_burst_len, conn->sess->sess_ops->FirstBurstLength); 157 transport_send_check_condition_and_sense(&cmd->se_cmd, 158 TCM_INCORRECT_AMOUNT_OF_DATA, 0); 159 return DATAOUT_CANNOT_RECOVER; 160 } 161 162 /* 163 * Perform various MaxBurstLength and ISCSI_FLAG_CMD_FINAL sanity 164 * checks for the current Unsolicited DataOUT Sequence. 165 */ 166 if (hdr->flags & ISCSI_FLAG_CMD_FINAL) { 167 /* 168 * Ignore ISCSI_FLAG_CMD_FINAL checks while DataPDUInOrder=No, end of 169 * sequence checks are handled in 170 * iscsit_dataout_datapduinorder_no_fbit(). 171 */ 172 if (!conn->sess->sess_ops->DataPDUInOrder) 173 goto out; 174 175 if ((first_burst_len != cmd->se_cmd.data_length) && 176 (first_burst_len != conn->sess->sess_ops->FirstBurstLength)) { 177 pr_err("Unsolicited non-immediate data" 178 " received %u does not equal FirstBurstLength: %u, and" 179 " does not equal ExpXferLen %u.\n", first_burst_len, 180 conn->sess->sess_ops->FirstBurstLength, 181 cmd->se_cmd.data_length); 182 transport_send_check_condition_and_sense(&cmd->se_cmd, 183 TCM_INCORRECT_AMOUNT_OF_DATA, 0); 184 return DATAOUT_CANNOT_RECOVER; 185 } 186 } else { 187 if (first_burst_len == conn->sess->sess_ops->FirstBurstLength) { 188 pr_err("Command ITT: 0x%08x reached" 189 " FirstBurstLength: %u, but ISCSI_FLAG_CMD_FINAL is not set. protocol" 190 " error.\n", cmd->init_task_tag, 191 conn->sess->sess_ops->FirstBurstLength); 192 return DATAOUT_CANNOT_RECOVER; 193 } 194 if (first_burst_len == cmd->se_cmd.data_length) { 195 pr_err("Command ITT: 0x%08x reached" 196 " ExpXferLen: %u, but ISCSI_FLAG_CMD_FINAL is not set. protocol" 197 " error.\n", cmd->init_task_tag, cmd->se_cmd.data_length); 198 return DATAOUT_CANNOT_RECOVER; 199 } 200 } 201 202out: 203 return DATAOUT_NORMAL; 204} 205 206static int iscsit_dataout_check_sequence( 207 struct iscsit_cmd *cmd, 208 unsigned char *buf) 209{ 210 u32 next_burst_len; 211 struct iscsit_conn *conn = cmd->conn; 212 struct iscsi_seq *seq = NULL; 213 struct iscsi_data *hdr = (struct iscsi_data *) buf; 214 u32 payload_length = ntoh24(hdr->dlength); 215 216 /* 217 * For DataSequenceInOrder=Yes: Check that the offset and offset+length 218 * is within range as defined by iscsi_set_dataout_sequence_values(). 219 * 220 * For DataSequenceInOrder=No: Check that an struct iscsi_seq exists for 221 * offset+length tuple. 222 */ 223 if (conn->sess->sess_ops->DataSequenceInOrder) { 224 /* 225 * Due to possibility of recovery DataOUT sent by the initiator 226 * fullfilling an Recovery R2T, it's best to just dump the 227 * payload here, instead of erroring out. 228 */ 229 if ((be32_to_cpu(hdr->offset) < cmd->seq_start_offset) || 230 ((be32_to_cpu(hdr->offset) + payload_length) > cmd->seq_end_offset)) { 231 pr_err("Command ITT: 0x%08x with Offset: %u," 232 " Length: %u outside of Sequence %u:%u while" 233 " DataSequenceInOrder=Yes.\n", cmd->init_task_tag, 234 be32_to_cpu(hdr->offset), payload_length, cmd->seq_start_offset, 235 cmd->seq_end_offset); 236 237 if (iscsit_dump_data_payload(conn, payload_length, 1) < 0) 238 return DATAOUT_CANNOT_RECOVER; 239 return DATAOUT_WITHIN_COMMAND_RECOVERY; 240 } 241 242 next_burst_len = (cmd->next_burst_len + payload_length); 243 } else { 244 seq = iscsit_get_seq_holder(cmd, be32_to_cpu(hdr->offset), 245 payload_length); 246 if (!seq) 247 return DATAOUT_CANNOT_RECOVER; 248 /* 249 * Set the struct iscsi_seq pointer to reuse later. 250 */ 251 cmd->seq_ptr = seq; 252 253 if (seq->status == DATAOUT_SEQUENCE_COMPLETE) { 254 if (iscsit_dump_data_payload(conn, payload_length, 1) < 0) 255 return DATAOUT_CANNOT_RECOVER; 256 return DATAOUT_WITHIN_COMMAND_RECOVERY; 257 } 258 259 next_burst_len = (seq->next_burst_len + payload_length); 260 } 261 262 if (next_burst_len > conn->sess->sess_ops->MaxBurstLength) { 263 pr_err("Command ITT: 0x%08x, NextBurstLength: %u and" 264 " Length: %u exceeds MaxBurstLength: %u. protocol" 265 " error.\n", cmd->init_task_tag, 266 (next_burst_len - payload_length), 267 payload_length, conn->sess->sess_ops->MaxBurstLength); 268 return DATAOUT_CANNOT_RECOVER; 269 } 270 271 /* 272 * Perform various MaxBurstLength and ISCSI_FLAG_CMD_FINAL sanity 273 * checks for the current DataOUT Sequence. 274 */ 275 if (hdr->flags & ISCSI_FLAG_CMD_FINAL) { 276 /* 277 * Ignore ISCSI_FLAG_CMD_FINAL checks while DataPDUInOrder=No, end of 278 * sequence checks are handled in 279 * iscsit_dataout_datapduinorder_no_fbit(). 280 */ 281 if (!conn->sess->sess_ops->DataPDUInOrder) 282 goto out; 283 284 if (conn->sess->sess_ops->DataSequenceInOrder) { 285 if ((next_burst_len < 286 conn->sess->sess_ops->MaxBurstLength) && 287 ((cmd->write_data_done + payload_length) < 288 cmd->se_cmd.data_length)) { 289 pr_err("Command ITT: 0x%08x set ISCSI_FLAG_CMD_FINAL" 290 " before end of DataOUT sequence, protocol" 291 " error.\n", cmd->init_task_tag); 292 return DATAOUT_CANNOT_RECOVER; 293 } 294 } else { 295 if (next_burst_len < seq->xfer_len) { 296 pr_err("Command ITT: 0x%08x set ISCSI_FLAG_CMD_FINAL" 297 " before end of DataOUT sequence, protocol" 298 " error.\n", cmd->init_task_tag); 299 return DATAOUT_CANNOT_RECOVER; 300 } 301 } 302 } else { 303 if (conn->sess->sess_ops->DataSequenceInOrder) { 304 if (next_burst_len == 305 conn->sess->sess_ops->MaxBurstLength) { 306 pr_err("Command ITT: 0x%08x reached" 307 " MaxBurstLength: %u, but ISCSI_FLAG_CMD_FINAL is" 308 " not set, protocol error.", cmd->init_task_tag, 309 conn->sess->sess_ops->MaxBurstLength); 310 return DATAOUT_CANNOT_RECOVER; 311 } 312 if ((cmd->write_data_done + payload_length) == 313 cmd->se_cmd.data_length) { 314 pr_err("Command ITT: 0x%08x reached" 315 " last DataOUT PDU in sequence but ISCSI_FLAG_" 316 "CMD_FINAL is not set, protocol error.\n", 317 cmd->init_task_tag); 318 return DATAOUT_CANNOT_RECOVER; 319 } 320 } else { 321 if (next_burst_len == seq->xfer_len) { 322 pr_err("Command ITT: 0x%08x reached" 323 " last DataOUT PDU in sequence but ISCSI_FLAG_" 324 "CMD_FINAL is not set, protocol error.\n", 325 cmd->init_task_tag); 326 return DATAOUT_CANNOT_RECOVER; 327 } 328 } 329 } 330 331out: 332 return DATAOUT_NORMAL; 333} 334 335static int iscsit_dataout_check_datasn( 336 struct iscsit_cmd *cmd, 337 unsigned char *buf) 338{ 339 u32 data_sn = 0; 340 struct iscsit_conn *conn = cmd->conn; 341 struct iscsi_data *hdr = (struct iscsi_data *) buf; 342 u32 payload_length = ntoh24(hdr->dlength); 343 344 /* 345 * Considering the target has no method of re-requesting DataOUT 346 * by DataSN, if we receieve a greater DataSN than expected we 347 * assume the functions for DataPDUInOrder=[Yes,No] below will 348 * handle it. 349 * 350 * If the DataSN is less than expected, dump the payload. 351 */ 352 if (conn->sess->sess_ops->DataSequenceInOrder) 353 data_sn = cmd->data_sn; 354 else { 355 struct iscsi_seq *seq = cmd->seq_ptr; 356 data_sn = seq->data_sn; 357 } 358 359 if (be32_to_cpu(hdr->datasn) > data_sn) { 360 pr_err("Command ITT: 0x%08x, received DataSN: 0x%08x" 361 " higher than expected 0x%08x.\n", cmd->init_task_tag, 362 be32_to_cpu(hdr->datasn), data_sn); 363 goto recover; 364 } else if (be32_to_cpu(hdr->datasn) < data_sn) { 365 pr_err("Command ITT: 0x%08x, received DataSN: 0x%08x" 366 " lower than expected 0x%08x, discarding payload.\n", 367 cmd->init_task_tag, be32_to_cpu(hdr->datasn), data_sn); 368 goto dump; 369 } 370 371 return DATAOUT_NORMAL; 372 373recover: 374 if (!conn->sess->sess_ops->ErrorRecoveryLevel) { 375 pr_err("Unable to perform within-command recovery" 376 " while ERL=0.\n"); 377 return DATAOUT_CANNOT_RECOVER; 378 } 379dump: 380 if (iscsit_dump_data_payload(conn, payload_length, 1) < 0) 381 return DATAOUT_CANNOT_RECOVER; 382 383 return DATAOUT_WITHIN_COMMAND_RECOVERY; 384} 385 386static int iscsit_dataout_pre_datapduinorder_yes( 387 struct iscsit_cmd *cmd, 388 unsigned char *buf) 389{ 390 int dump = 0, recovery = 0; 391 struct iscsit_conn *conn = cmd->conn; 392 struct iscsi_data *hdr = (struct iscsi_data *) buf; 393 u32 payload_length = ntoh24(hdr->dlength); 394 395 /* 396 * For DataSequenceInOrder=Yes: If the offset is greater than the global 397 * DataPDUInOrder=Yes offset counter in struct iscsit_cmd a protcol error has 398 * occurred and fail the connection. 399 * 400 * For DataSequenceInOrder=No: If the offset is greater than the per 401 * sequence DataPDUInOrder=Yes offset counter in struct iscsi_seq a protocol 402 * error has occurred and fail the connection. 403 */ 404 if (conn->sess->sess_ops->DataSequenceInOrder) { 405 if (be32_to_cpu(hdr->offset) != cmd->write_data_done) { 406 pr_err("Command ITT: 0x%08x, received offset" 407 " %u different than expected %u.\n", cmd->init_task_tag, 408 be32_to_cpu(hdr->offset), cmd->write_data_done); 409 recovery = 1; 410 goto recover; 411 } 412 } else { 413 struct iscsi_seq *seq = cmd->seq_ptr; 414 415 if (be32_to_cpu(hdr->offset) > seq->offset) { 416 pr_err("Command ITT: 0x%08x, received offset" 417 " %u greater than expected %u.\n", cmd->init_task_tag, 418 be32_to_cpu(hdr->offset), seq->offset); 419 recovery = 1; 420 goto recover; 421 } else if (be32_to_cpu(hdr->offset) < seq->offset) { 422 pr_err("Command ITT: 0x%08x, received offset" 423 " %u less than expected %u, discarding payload.\n", 424 cmd->init_task_tag, be32_to_cpu(hdr->offset), 425 seq->offset); 426 dump = 1; 427 goto dump; 428 } 429 } 430 431 return DATAOUT_NORMAL; 432 433recover: 434 if (!conn->sess->sess_ops->ErrorRecoveryLevel) { 435 pr_err("Unable to perform within-command recovery" 436 " while ERL=0.\n"); 437 return DATAOUT_CANNOT_RECOVER; 438 } 439dump: 440 if (iscsit_dump_data_payload(conn, payload_length, 1) < 0) 441 return DATAOUT_CANNOT_RECOVER; 442 443 return (recovery) ? iscsit_recover_dataout_sequence(cmd, 444 be32_to_cpu(hdr->offset), payload_length) : 445 (dump) ? DATAOUT_WITHIN_COMMAND_RECOVERY : DATAOUT_NORMAL; 446} 447 448static int iscsit_dataout_pre_datapduinorder_no( 449 struct iscsit_cmd *cmd, 450 unsigned char *buf) 451{ 452 struct iscsi_pdu *pdu; 453 struct iscsi_data *hdr = (struct iscsi_data *) buf; 454 u32 payload_length = ntoh24(hdr->dlength); 455 456 pdu = iscsit_get_pdu_holder(cmd, be32_to_cpu(hdr->offset), 457 payload_length); 458 if (!pdu) 459 return DATAOUT_CANNOT_RECOVER; 460 461 cmd->pdu_ptr = pdu; 462 463 switch (pdu->status) { 464 case ISCSI_PDU_NOT_RECEIVED: 465 case ISCSI_PDU_CRC_FAILED: 466 case ISCSI_PDU_TIMED_OUT: 467 break; 468 case ISCSI_PDU_RECEIVED_OK: 469 pr_err("Command ITT: 0x%08x received already gotten" 470 " Offset: %u, Length: %u\n", cmd->init_task_tag, 471 be32_to_cpu(hdr->offset), payload_length); 472 return iscsit_dump_data_payload(cmd->conn, payload_length, 1); 473 default: 474 return DATAOUT_CANNOT_RECOVER; 475 } 476 477 return DATAOUT_NORMAL; 478} 479 480static int iscsit_dataout_update_r2t(struct iscsit_cmd *cmd, u32 offset, u32 length) 481{ 482 struct iscsi_r2t *r2t; 483 484 if (cmd->unsolicited_data) 485 return 0; 486 487 r2t = iscsit_get_r2t_for_eos(cmd, offset, length); 488 if (!r2t) 489 return -1; 490 491 spin_lock_bh(&cmd->r2t_lock); 492 r2t->seq_complete = 1; 493 cmd->outstanding_r2ts--; 494 spin_unlock_bh(&cmd->r2t_lock); 495 496 return 0; 497} 498 499static int iscsit_dataout_update_datapduinorder_no( 500 struct iscsit_cmd *cmd, 501 u32 data_sn, 502 int f_bit) 503{ 504 int ret = 0; 505 struct iscsi_pdu *pdu = cmd->pdu_ptr; 506 507 pdu->data_sn = data_sn; 508 509 switch (pdu->status) { 510 case ISCSI_PDU_NOT_RECEIVED: 511 pdu->status = ISCSI_PDU_RECEIVED_OK; 512 break; 513 case ISCSI_PDU_CRC_FAILED: 514 pdu->status = ISCSI_PDU_RECEIVED_OK; 515 break; 516 case ISCSI_PDU_TIMED_OUT: 517 pdu->status = ISCSI_PDU_RECEIVED_OK; 518 break; 519 default: 520 return DATAOUT_CANNOT_RECOVER; 521 } 522 523 if (f_bit) { 524 ret = iscsit_dataout_datapduinorder_no_fbit(cmd, pdu); 525 if (ret == DATAOUT_CANNOT_RECOVER) 526 return ret; 527 } 528 529 return DATAOUT_NORMAL; 530} 531 532static int iscsit_dataout_post_crc_passed( 533 struct iscsit_cmd *cmd, 534 unsigned char *buf) 535{ 536 int ret, send_r2t = 0; 537 struct iscsit_conn *conn = cmd->conn; 538 struct iscsi_seq *seq = NULL; 539 struct iscsi_data *hdr = (struct iscsi_data *) buf; 540 u32 payload_length = ntoh24(hdr->dlength); 541 542 if (cmd->unsolicited_data) { 543 if ((cmd->first_burst_len + payload_length) == 544 conn->sess->sess_ops->FirstBurstLength) { 545 if (iscsit_dataout_update_r2t(cmd, be32_to_cpu(hdr->offset), 546 payload_length) < 0) 547 return DATAOUT_CANNOT_RECOVER; 548 send_r2t = 1; 549 } 550 551 if (!conn->sess->sess_ops->DataPDUInOrder) { 552 ret = iscsit_dataout_update_datapduinorder_no(cmd, 553 be32_to_cpu(hdr->datasn), 554 (hdr->flags & ISCSI_FLAG_CMD_FINAL)); 555 if (ret == DATAOUT_CANNOT_RECOVER) 556 return ret; 557 } 558 559 cmd->first_burst_len += payload_length; 560 561 if (conn->sess->sess_ops->DataSequenceInOrder) 562 cmd->data_sn++; 563 else { 564 seq = cmd->seq_ptr; 565 seq->data_sn++; 566 seq->offset += payload_length; 567 } 568 569 if (send_r2t) { 570 if (seq) 571 seq->status = DATAOUT_SEQUENCE_COMPLETE; 572 cmd->first_burst_len = 0; 573 cmd->unsolicited_data = 0; 574 } 575 } else { 576 if (conn->sess->sess_ops->DataSequenceInOrder) { 577 if ((cmd->next_burst_len + payload_length) == 578 conn->sess->sess_ops->MaxBurstLength) { 579 if (iscsit_dataout_update_r2t(cmd, 580 be32_to_cpu(hdr->offset), 581 payload_length) < 0) 582 return DATAOUT_CANNOT_RECOVER; 583 send_r2t = 1; 584 } 585 586 if (!conn->sess->sess_ops->DataPDUInOrder) { 587 ret = iscsit_dataout_update_datapduinorder_no( 588 cmd, be32_to_cpu(hdr->datasn), 589 (hdr->flags & ISCSI_FLAG_CMD_FINAL)); 590 if (ret == DATAOUT_CANNOT_RECOVER) 591 return ret; 592 } 593 594 cmd->next_burst_len += payload_length; 595 cmd->data_sn++; 596 597 if (send_r2t) 598 cmd->next_burst_len = 0; 599 } else { 600 seq = cmd->seq_ptr; 601 602 if ((seq->next_burst_len + payload_length) == 603 seq->xfer_len) { 604 if (iscsit_dataout_update_r2t(cmd, 605 be32_to_cpu(hdr->offset), 606 payload_length) < 0) 607 return DATAOUT_CANNOT_RECOVER; 608 send_r2t = 1; 609 } 610 611 if (!conn->sess->sess_ops->DataPDUInOrder) { 612 ret = iscsit_dataout_update_datapduinorder_no( 613 cmd, be32_to_cpu(hdr->datasn), 614 (hdr->flags & ISCSI_FLAG_CMD_FINAL)); 615 if (ret == DATAOUT_CANNOT_RECOVER) 616 return ret; 617 } 618 619 seq->data_sn++; 620 seq->offset += payload_length; 621 seq->next_burst_len += payload_length; 622 623 if (send_r2t) { 624 seq->next_burst_len = 0; 625 seq->status = DATAOUT_SEQUENCE_COMPLETE; 626 } 627 } 628 } 629 630 if (send_r2t && conn->sess->sess_ops->DataSequenceInOrder) 631 cmd->data_sn = 0; 632 633 cmd->write_data_done += payload_length; 634 635 if (cmd->write_data_done == cmd->se_cmd.data_length) 636 return DATAOUT_SEND_TO_TRANSPORT; 637 else if (send_r2t) 638 return DATAOUT_SEND_R2T; 639 else 640 return DATAOUT_NORMAL; 641} 642 643static int iscsit_dataout_post_crc_failed( 644 struct iscsit_cmd *cmd, 645 unsigned char *buf) 646{ 647 struct iscsit_conn *conn = cmd->conn; 648 struct iscsi_pdu *pdu; 649 struct iscsi_data *hdr = (struct iscsi_data *) buf; 650 u32 payload_length = ntoh24(hdr->dlength); 651 652 if (conn->sess->sess_ops->DataPDUInOrder) 653 goto recover; 654 /* 655 * The rest of this function is only called when DataPDUInOrder=No. 656 */ 657 pdu = cmd->pdu_ptr; 658 659 switch (pdu->status) { 660 case ISCSI_PDU_NOT_RECEIVED: 661 pdu->status = ISCSI_PDU_CRC_FAILED; 662 break; 663 case ISCSI_PDU_CRC_FAILED: 664 break; 665 case ISCSI_PDU_TIMED_OUT: 666 pdu->status = ISCSI_PDU_CRC_FAILED; 667 break; 668 default: 669 return DATAOUT_CANNOT_RECOVER; 670 } 671 672recover: 673 return iscsit_recover_dataout_sequence(cmd, be32_to_cpu(hdr->offset), 674 payload_length); 675} 676 677/* 678 * Called from iscsit_handle_data_out() before DataOUT Payload is received 679 * and CRC computed. 680 */ 681int iscsit_check_pre_dataout( 682 struct iscsit_cmd *cmd, 683 unsigned char *buf) 684{ 685 int ret; 686 struct iscsit_conn *conn = cmd->conn; 687 688 ret = iscsit_dataout_within_command_recovery_check(cmd, buf); 689 if ((ret == DATAOUT_WITHIN_COMMAND_RECOVERY) || 690 (ret == DATAOUT_CANNOT_RECOVER)) 691 return ret; 692 693 ret = iscsit_dataout_check_datasn(cmd, buf); 694 if ((ret == DATAOUT_WITHIN_COMMAND_RECOVERY) || 695 (ret == DATAOUT_CANNOT_RECOVER)) 696 return ret; 697 698 if (cmd->unsolicited_data) { 699 ret = iscsit_dataout_check_unsolicited_sequence(cmd, buf); 700 if ((ret == DATAOUT_WITHIN_COMMAND_RECOVERY) || 701 (ret == DATAOUT_CANNOT_RECOVER)) 702 return ret; 703 } else { 704 ret = iscsit_dataout_check_sequence(cmd, buf); 705 if ((ret == DATAOUT_WITHIN_COMMAND_RECOVERY) || 706 (ret == DATAOUT_CANNOT_RECOVER)) 707 return ret; 708 } 709 710 return (conn->sess->sess_ops->DataPDUInOrder) ? 711 iscsit_dataout_pre_datapduinorder_yes(cmd, buf) : 712 iscsit_dataout_pre_datapduinorder_no(cmd, buf); 713} 714 715/* 716 * Called from iscsit_handle_data_out() after DataOUT Payload is received 717 * and CRC computed. 718 */ 719int iscsit_check_post_dataout( 720 struct iscsit_cmd *cmd, 721 unsigned char *buf, 722 u8 data_crc_failed) 723{ 724 struct iscsit_conn *conn = cmd->conn; 725 726 cmd->dataout_timeout_retries = 0; 727 728 if (!data_crc_failed) 729 return iscsit_dataout_post_crc_passed(cmd, buf); 730 else { 731 if (!conn->sess->sess_ops->ErrorRecoveryLevel) { 732 pr_err("Unable to recover from DataOUT CRC" 733 " failure while ERL=0, closing session.\n"); 734 iscsit_reject_cmd(cmd, ISCSI_REASON_DATA_DIGEST_ERROR, 735 buf); 736 return DATAOUT_CANNOT_RECOVER; 737 } 738 739 iscsit_reject_cmd(cmd, ISCSI_REASON_DATA_DIGEST_ERROR, buf); 740 return iscsit_dataout_post_crc_failed(cmd, buf); 741 } 742} 743 744void iscsit_handle_time2retain_timeout(struct timer_list *t) 745{ 746 struct iscsit_session *sess = timer_container_of(sess, t, 747 time2retain_timer); 748 struct iscsi_portal_group *tpg = sess->tpg; 749 struct se_portal_group *se_tpg = &tpg->tpg_se_tpg; 750 751 spin_lock_bh(&se_tpg->session_lock); 752 if (sess->time2retain_timer_flags & ISCSI_TF_STOP) { 753 spin_unlock_bh(&se_tpg->session_lock); 754 return; 755 } 756 if (atomic_read(&sess->session_reinstatement)) { 757 pr_err("Exiting Time2Retain handler because" 758 " session_reinstatement=1\n"); 759 spin_unlock_bh(&se_tpg->session_lock); 760 return; 761 } 762 sess->time2retain_timer_flags |= ISCSI_TF_EXPIRED; 763 764 pr_err("Time2Retain timer expired for SID: %u, cleaning up" 765 " iSCSI session.\n", sess->sid); 766 767 iscsit_fill_cxn_timeout_err_stats(sess); 768 spin_unlock_bh(&se_tpg->session_lock); 769 iscsit_close_session(sess, false); 770} 771 772void iscsit_start_time2retain_handler(struct iscsit_session *sess) 773{ 774 int tpg_active; 775 /* 776 * Only start Time2Retain timer when the associated TPG is still in 777 * an ACTIVE (eg: not disabled or shutdown) state. 778 */ 779 spin_lock(&sess->tpg->tpg_state_lock); 780 tpg_active = (sess->tpg->tpg_state == TPG_STATE_ACTIVE); 781 spin_unlock(&sess->tpg->tpg_state_lock); 782 783 if (!tpg_active) 784 return; 785 786 if (sess->time2retain_timer_flags & ISCSI_TF_RUNNING) 787 return; 788 789 pr_debug("Starting Time2Retain timer for %u seconds on" 790 " SID: %u\n", sess->sess_ops->DefaultTime2Retain, sess->sid); 791 792 sess->time2retain_timer_flags &= ~ISCSI_TF_STOP; 793 sess->time2retain_timer_flags |= ISCSI_TF_RUNNING; 794 mod_timer(&sess->time2retain_timer, 795 jiffies + sess->sess_ops->DefaultTime2Retain * HZ); 796} 797 798int iscsit_stop_time2retain_timer(struct iscsit_session *sess) 799{ 800 struct iscsi_portal_group *tpg = sess->tpg; 801 struct se_portal_group *se_tpg = &tpg->tpg_se_tpg; 802 803 lockdep_assert_held(&se_tpg->session_lock); 804 805 if (sess->time2retain_timer_flags & ISCSI_TF_EXPIRED) 806 return -1; 807 808 if (!(sess->time2retain_timer_flags & ISCSI_TF_RUNNING)) 809 return 0; 810 811 sess->time2retain_timer_flags |= ISCSI_TF_STOP; 812 spin_unlock(&se_tpg->session_lock); 813 814 timer_delete_sync(&sess->time2retain_timer); 815 816 spin_lock(&se_tpg->session_lock); 817 sess->time2retain_timer_flags &= ~ISCSI_TF_RUNNING; 818 pr_debug("Stopped Time2Retain Timer for SID: %u\n", 819 sess->sid); 820 return 0; 821} 822 823void iscsit_connection_reinstatement_rcfr(struct iscsit_conn *conn) 824{ 825 spin_lock_bh(&conn->state_lock); 826 if (atomic_read(&conn->connection_exit)) { 827 spin_unlock_bh(&conn->state_lock); 828 goto sleep; 829 } 830 831 if (atomic_read(&conn->transport_failed)) { 832 spin_unlock_bh(&conn->state_lock); 833 goto sleep; 834 } 835 spin_unlock_bh(&conn->state_lock); 836 837 if (conn->tx_thread && conn->tx_thread_active) 838 send_sig(SIGINT, conn->tx_thread, 1); 839 if (conn->rx_thread && conn->rx_thread_active) 840 send_sig(SIGINT, conn->rx_thread, 1); 841 842sleep: 843 wait_for_completion(&conn->conn_wait_rcfr_comp); 844 complete(&conn->conn_post_wait_comp); 845} 846 847void iscsit_cause_connection_reinstatement(struct iscsit_conn *conn, int sleep) 848{ 849 spin_lock_bh(&conn->state_lock); 850 if (atomic_read(&conn->connection_exit)) { 851 spin_unlock_bh(&conn->state_lock); 852 return; 853 } 854 855 if (atomic_read(&conn->transport_failed)) { 856 spin_unlock_bh(&conn->state_lock); 857 return; 858 } 859 860 if (atomic_read(&conn->connection_reinstatement)) { 861 spin_unlock_bh(&conn->state_lock); 862 return; 863 } 864 865 if (conn->tx_thread && conn->tx_thread_active) 866 send_sig(SIGINT, conn->tx_thread, 1); 867 if (conn->rx_thread && conn->rx_thread_active) 868 send_sig(SIGINT, conn->rx_thread, 1); 869 870 atomic_set(&conn->connection_reinstatement, 1); 871 if (!sleep) { 872 spin_unlock_bh(&conn->state_lock); 873 return; 874 } 875 876 atomic_set(&conn->sleep_on_conn_wait_comp, 1); 877 spin_unlock_bh(&conn->state_lock); 878 879 wait_for_completion(&conn->conn_wait_comp); 880 complete(&conn->conn_post_wait_comp); 881} 882EXPORT_SYMBOL(iscsit_cause_connection_reinstatement); 883 884void iscsit_fall_back_to_erl0(struct iscsit_session *sess) 885{ 886 pr_debug("Falling back to ErrorRecoveryLevel=0 for SID:" 887 " %u\n", sess->sid); 888 889 atomic_set(&sess->session_fall_back_to_erl0, 1); 890} 891 892static void iscsit_handle_connection_cleanup(struct iscsit_conn *conn) 893{ 894 struct iscsit_session *sess = conn->sess; 895 896 if ((sess->sess_ops->ErrorRecoveryLevel == 2) && 897 !atomic_read(&sess->session_reinstatement) && 898 !atomic_read(&sess->session_fall_back_to_erl0)) 899 iscsit_connection_recovery_transport_reset(conn); 900 else { 901 pr_debug("Performing cleanup for failed iSCSI" 902 " Connection ID: %hu from %s\n", conn->cid, 903 sess->sess_ops->InitiatorName); 904 iscsit_close_connection(conn); 905 } 906} 907 908void iscsit_take_action_for_connection_exit(struct iscsit_conn *conn, bool *conn_freed) 909{ 910 *conn_freed = false; 911 912 spin_lock_bh(&conn->state_lock); 913 if (atomic_read(&conn->connection_exit)) { 914 spin_unlock_bh(&conn->state_lock); 915 return; 916 } 917 atomic_set(&conn->connection_exit, 1); 918 919 if (conn->conn_state == TARG_CONN_STATE_IN_LOGOUT) { 920 spin_unlock_bh(&conn->state_lock); 921 iscsit_close_connection(conn); 922 *conn_freed = true; 923 return; 924 } 925 926 if (conn->conn_state == TARG_CONN_STATE_CLEANUP_WAIT) { 927 spin_unlock_bh(&conn->state_lock); 928 return; 929 } 930 931 pr_debug("Moving to TARG_CONN_STATE_CLEANUP_WAIT.\n"); 932 conn->conn_state = TARG_CONN_STATE_CLEANUP_WAIT; 933 spin_unlock_bh(&conn->state_lock); 934 935 iscsit_handle_connection_cleanup(conn); 936 *conn_freed = true; 937}
~/
Read-only file preview.