rtw_eeprom.h

  1/* SPDX-License-Identifier: GPL-2.0 */
  2/******************************************************************************
  3 *
  4 * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
  5 *
  6 ******************************************************************************/
  7#ifndef __RTW_EEPROM_H__
  8#define __RTW_EEPROM_H__
  9
 10
 11#define	RTL8712_EEPROM_ID			0x8712
 12/* define	EEPROM_MAX_SIZE			256 */
 13
 14#define	HWSET_MAX_SIZE_128		128
 15#define	HWSET_MAX_SIZE_256		256
 16#define	HWSET_MAX_SIZE_512		512
 17
 18#define	EEPROM_MAX_SIZE			HWSET_MAX_SIZE_512
 19
 20#define	CLOCK_RATE					50			/* 100us */
 21
 22/*  EEPROM opcodes */
 23#define EEPROM_READ_OPCODE		06
 24#define EEPROM_WRITE_OPCODE		05
 25#define EEPROM_ERASE_OPCODE		07
 26#define EEPROM_EWEN_OPCODE		19      /*  Erase/write enable */
 27#define EEPROM_EWDS_OPCODE		16      /*  Erase/write disable */
 28
 29/* Country codes */
 30#define USA							0x555320
 31#define EUROPE						0x1 /* temp, should be provided later */
 32#define JAPAN						0x2 /* temp, should be provided later */
 33
 34#define eeprom_cis0_sz	17
 35#define eeprom_cis1_sz	50
 36
 37/*  */
 38/*  Customer ID, note that: */
 39/*  This variable is initiailzed through EEPROM or registry, */
 40/*  however, its definition may be different with that in EEPROM for */
 41/*  EEPROM size consideration. So, we have to perform proper translation between them. */
 42/*  Besides, CustomerID of registry has precedence of that of EEPROM. */
 43/*  defined below. 060703, by rcnjko. */
 44/*  */
 45enum {
 46	RT_CID_DEFAULT = 0,
 47	RT_CID_8187_ALPHA0 = 1,
 48	RT_CID_8187_SERCOMM_PS = 2,
 49	RT_CID_8187_HW_LED = 3,
 50	RT_CID_8187_NETGEAR = 4,
 51	RT_CID_WHQL = 5,
 52	RT_CID_819x_CAMEO  = 6,
 53	RT_CID_819x_RUNTOP = 7,
 54	RT_CID_819x_Senao = 8,
 55	RT_CID_TOSHIBA = 9,	/*  Merge by Jacken, 2008/01/31. */
 56	RT_CID_819x_Netcore = 10,
 57	RT_CID_Nettronix = 11,
 58	RT_CID_DLINK = 12,
 59	RT_CID_PRONET = 13,
 60	RT_CID_COREGA = 14,
 61	RT_CID_CHINA_MOBILE = 15,
 62	RT_CID_819x_ALPHA = 16,
 63	RT_CID_819x_Sitecom = 17,
 64	RT_CID_CCX = 18, /*  It's set under CCX logo test and isn't demanded for CCX functions, but for test behavior like retry limit and tx report. By Bruce, 2009-02-17. */
 65	RT_CID_819x_Lenovo = 19,
 66	RT_CID_819x_QMI = 20,
 67	RT_CID_819x_Edimax_Belkin = 21,
 68	RT_CID_819x_Sercomm_Belkin = 22,
 69	RT_CID_819x_CAMEO1 = 23,
 70	RT_CID_819x_MSI = 24,
 71	RT_CID_819x_Acer = 25,
 72	RT_CID_819x_AzWave_ASUS = 26,
 73	RT_CID_819x_AzWave = 27, /*  For AzWave in PCIe, The ID is AzWave use and not only Asus */
 74	RT_CID_819x_HP = 28,
 75	RT_CID_819x_WNC_COREGA = 29,
 76	RT_CID_819x_Arcadyan_Belkin = 30,
 77	RT_CID_819x_SAMSUNG = 31,
 78	RT_CID_819x_CLEVO = 32,
 79	RT_CID_819x_DELL = 33,
 80	RT_CID_819x_PRONETS = 34,
 81	RT_CID_819x_Edimax_ASUS = 35,
 82	RT_CID_NETGEAR = 36,
 83	RT_CID_PLANEX = 37,
 84	RT_CID_CC_C = 38,
 85	RT_CID_819x_Xavi = 39,
 86	RT_CID_LENOVO_CHINA = 40,
 87	RT_CID_INTEL_CHINA = 41,
 88	RT_CID_TPLINK_HPWR = 42,
 89	RT_CID_819x_Sercomm_Netgear = 43,
 90	RT_CID_819x_ALPHA_Dlink = 44,/* add by ylb 20121012 for customer led for alpha */
 91	RT_CID_WNC_NEC = 45,/* add by page for NEC */
 92	RT_CID_DNI_BUFFALO = 46,/* add by page for NEC */
 93};
 94
 95struct eeprom_priv {
 96	u8 bautoload_fail_flag;
 97	u8 bloadfile_fail_flag;
 98	u8 bloadmac_fail_flag;
 99	u8 EepromOrEfuse;
100
101	u8 mac_addr[6];	/* PermanentAddress */
102
103	u16 	channel_plan;
104	u16 	CustomerID;
105
106	u8 efuse_eeprom_data[EEPROM_MAX_SIZE]; /* 92C:256bytes, 88E:512bytes, we use union set (512bytes) */
107	u8 adjuseVoltageVal;
108
109	u8 EEPROMRFGainOffset;
110	u8 EEPROMRFGainVal;
111
112	u8 sdio_setting;
113	u32 	ocr;
114	u8 cis0[eeprom_cis0_sz];
115	u8 cis1[eeprom_cis1_sz];
116};
117
118#endif  /* __RTL871X_EEPROM_H__ */