File Index
Files and directories
Sign in
FILE

libertas_tf.h

File preview with syntax highlighting.

linux-6.19.14/drivers/net/wireless/marvell/libertas_tf/libertas_tf.h C
  1/* SPDX-License-Identifier: GPL-2.0-or-later */
  2/*
  3 *  Copyright (C) 2008, cozybit Inc.
  4 *  Copyright (C) 2007, Red Hat, Inc.
  5 *  Copyright (C) 2003-2006, Marvell International Ltd.
  6 */
  7#include <linux/spinlock.h>
  8#include <linux/device.h>
  9#include <linux/kthread.h>
 10#include <net/mac80211.h>
 11
 12#include "deb_defs.h"
 13
 14#ifndef DRV_NAME
 15#define DRV_NAME "libertas_tf"
 16#endif
 17
 18#define	MRVL_DEFAULT_RETRIES			9
 19#define MRVL_PER_PACKET_RATE			0x10
 20#define MRVL_MAX_BCN_SIZE			440
 21#define CMD_OPTION_WAITFORRSP			0x0002
 22
 23/* Return command are almost always the same as the host command, but with
 24 * bit 15 set high.  There are a few exceptions, though...
 25 */
 26#define CMD_RET(cmd)			(0x8000 | cmd)
 27
 28/* Command codes */
 29#define CMD_GET_HW_SPEC				0x0003
 30#define CMD_802_11_RESET			0x0005
 31#define CMD_MAC_MULTICAST_ADR			0x0010
 32#define CMD_802_11_RADIO_CONTROL		0x001c
 33#define CMD_802_11_RF_CHANNEL			0x001d
 34#define CMD_802_11_RF_TX_POWER			0x001e
 35#define CMD_MAC_CONTROL				0x0028
 36#define CMD_802_11_MAC_ADDRESS			0x004d
 37#define	CMD_SET_BOOT2_VER			0x00a5
 38#define CMD_802_11_BEACON_CTRL			0x00b0
 39#define CMD_802_11_BEACON_SET			0x00cb
 40#define CMD_802_11_SET_MODE			0x00cc
 41#define CMD_802_11_SET_BSSID			0x00cd
 42
 43#define CMD_ACT_GET			0x0000
 44#define CMD_ACT_SET			0x0001
 45
 46/* Define action or option for CMD_802_11_RESET */
 47#define CMD_ACT_HALT			0x0003
 48
 49/* Define action or option for CMD_MAC_CONTROL */
 50#define CMD_ACT_MAC_RX_ON			0x0001
 51#define CMD_ACT_MAC_TX_ON			0x0002
 52#define CMD_ACT_MAC_MULTICAST_ENABLE		0x0020
 53#define CMD_ACT_MAC_BROADCAST_ENABLE		0x0040
 54#define CMD_ACT_MAC_PROMISCUOUS_ENABLE		0x0080
 55#define CMD_ACT_MAC_ALL_MULTICAST_ENABLE	0x0100
 56
 57/* Define action or option for CMD_802_11_RADIO_CONTROL */
 58#define CMD_TYPE_AUTO_PREAMBLE		0x0001
 59#define CMD_TYPE_SHORT_PREAMBLE		0x0002
 60#define CMD_TYPE_LONG_PREAMBLE		0x0003
 61
 62#define TURN_ON_RF			0x01
 63#define RADIO_ON			0x01
 64#define RADIO_OFF			0x00
 65
 66#define SET_AUTO_PREAMBLE		0x05
 67#define SET_SHORT_PREAMBLE		0x03
 68#define SET_LONG_PREAMBLE		0x01
 69
 70/* Define action or option for CMD_802_11_RF_CHANNEL */
 71#define CMD_OPT_802_11_RF_CHANNEL_GET	0x00
 72#define CMD_OPT_802_11_RF_CHANNEL_SET	0x01
 73
 74/* Codes for CMD_802_11_SET_MODE */
 75enum lbtf_mode {
 76	LBTF_PASSIVE_MODE,
 77	LBTF_STA_MODE,
 78	LBTF_AP_MODE,
 79};
 80
 81/** Card Event definition */
 82#define MACREG_INT_CODE_FIRMWARE_READY		48
 83/** Buffer Constants */
 84
 85/*	The size of SQ memory PPA, DPA are 8 DWORDs, that keep the physical
 86*	addresses of TxPD buffers. Station has only 8 TxPD available, Whereas
 87*	driver has more local TxPDs. Each TxPD on the host memory is associated
 88*	with a Tx control node. The driver maintains 8 RxPD descriptors for
 89*	station firmware to store Rx packet information.
 90*
 91*	Current version of MAC has a 32x6 multicast address buffer.
 92*
 93*	802.11b can have up to  14 channels, the driver keeps the
 94*	BSSID(MAC address) of each APs or Ad hoc stations it has sensed.
 95*/
 96
 97#define MRVDRV_MAX_MULTICAST_LIST_SIZE	32
 98#define LBS_NUM_CMD_BUFFERS             10
 99#define LBS_CMD_BUFFER_SIZE             (2 * 1024)
100#define MRVDRV_MAX_CHANNEL_SIZE		14
101#define MRVDRV_SNAP_HEADER_LEN          8
102
103#define	LBS_UPLD_SIZE			2312
104#define DEV_NAME_LEN			32
105
106/** Misc constants */
107/* This section defines 802.11 specific contants */
108
109#define MRVDRV_MAX_REGION_CODE			6
110/**
111 * the table to keep region code
112 */
113#define LBTF_REGDOMAIN_US	0x10
114#define LBTF_REGDOMAIN_CA	0x20
115#define LBTF_REGDOMAIN_EU	0x30
116#define LBTF_REGDOMAIN_SP	0x31
117#define LBTF_REGDOMAIN_FR	0x32
118#define LBTF_REGDOMAIN_JP	0x40
119
120#define SBI_EVENT_CAUSE_SHIFT		3
121
122/** RxPD status */
123
124#define MRVDRV_RXPD_STATUS_OK                0x0001
125
126
127/* This is for firmware specific length */
128#define EXTRA_LEN	36
129
130#define MRVDRV_ETH_TX_PACKET_BUFFER_SIZE \
131	(ETH_FRAME_LEN + sizeof(struct txpd) + EXTRA_LEN)
132
133#define MRVDRV_ETH_RX_PACKET_BUFFER_SIZE \
134	(ETH_FRAME_LEN + sizeof(struct rxpd) \
135	 + MRVDRV_SNAP_HEADER_LEN + EXTRA_LEN)
136
137#define	CMD_F_HOSTCMD		(1 << 0)
138#define FW_CAPINFO_WPA  	(1 << 0)
139
140#define RF_ANTENNA_1		0x1
141#define RF_ANTENNA_2		0x2
142#define RF_ANTENNA_AUTO		0xFFFF
143
144#define LBTF_EVENT_BCN_SENT	55
145
146/** Global Variable Declaration */
147/** mv_ms_type */
148enum mv_ms_type {
149	MVMS_DAT = 0,
150	MVMS_CMD = 1,
151	MVMS_TXDONE = 2,
152	MVMS_EVENT
153};
154
155extern struct workqueue_struct *lbtf_wq;
156
157struct lbtf_private;
158
159struct lbtf_offset_value {
160	u32 offset;
161	u32 value;
162};
163
164struct channel_range {
165	u8 regdomain;
166	u8 start;
167	u8 end; /* exclusive (channel must be less than end) */
168};
169
170struct if_usb_card;
171
172struct lbtf_ops {
173	/** Hardware access */
174	int (*hw_host_to_card)(struct lbtf_private *priv, u8 type,
175			       u8 *payload, u16 nb);
176	int (*hw_prog_firmware)(struct lbtf_private *priv);
177	int (*hw_reset_device)(struct lbtf_private *priv);
178};
179
180/** Private structure for the MV device */
181struct lbtf_private {
182	void *card;
183	struct ieee80211_hw *hw;
184	const struct lbtf_ops *ops;
185
186	/* Command response buffer */
187	u8 cmd_resp_buff[LBS_UPLD_SIZE];
188	/* Download sent:
189	   bit0 1/0=data_sent/data_tx_done,
190	   bit1 1/0=cmd_sent/cmd_tx_done,
191	   all other bits reserved 0 */
192	struct ieee80211_vif *vif;
193
194	struct work_struct cmd_work;
195	struct work_struct tx_work;
196
197	/** Wlan adapter data structure*/
198	/** STATUS variables */
199	u32 fwrelease;
200	u32 fwcapinfo;
201	/* protected with big lock */
202
203	struct mutex lock;
204
205	/** command-related variables */
206	u16 seqnum;
207	/* protected by big lock */
208
209	struct cmd_ctrl_node *cmd_array;
210	/** Current command */
211	struct cmd_ctrl_node *cur_cmd;
212	/** command Queues */
213	/** Free command buffers */
214	struct list_head cmdfreeq;
215	/** Pending command buffers */
216	struct list_head cmdpendingq;
217
218	/** spin locks */
219	spinlock_t driver_lock;
220
221	/** Timers */
222	struct timer_list command_timer;
223	int nr_retries;
224	int cmd_timed_out;
225
226	u8 cmd_response_rxed;
227
228	/** capability Info used in Association, start, join */
229	u16 capability;
230
231	/** MAC address information */
232	u8 current_addr[ETH_ALEN];
233	u8 multicastlist[MRVDRV_MAX_MULTICAST_LIST_SIZE][ETH_ALEN];
234	u32 nr_of_multicastmacaddr;
235	int cur_freq;
236
237	struct sk_buff *skb_to_tx;
238	struct sk_buff *tx_skb;
239
240	/** NIC Operation characteristics */
241	u16 mac_control;
242	u16 regioncode;
243	struct channel_range range;
244
245	u8 radioon;
246	u32 preamble;
247
248	struct ieee80211_channel channels[14];
249	struct ieee80211_rate rates[12];
250	struct ieee80211_supported_band band;
251	struct lbtf_offset_value offsetvalue;
252
253	u8 surpriseremoved;
254	struct sk_buff_head bc_ps_buf;
255
256	/* Most recently reported noise in dBm */
257	s8 noise;
258};
259
260/* 802.11-related definitions */
261
262/* TxPD descriptor */
263struct txpd {
264	/* Current Tx packet status */
265	__le32 tx_status;
266	/* Tx control */
267	__le32 tx_control;
268	__le32 tx_packet_location;
269	/* Tx packet length */
270	__le16 tx_packet_length;
271	struct_group_attr(tx_dest_addr, __packed,
272		/* First 2 byte of destination MAC address */
273		u8 tx_dest_addr_high[2];
274		/* Last 4 byte of destination MAC address */
275		u8 tx_dest_addr_low[4];
276	);
277	/* Pkt Priority */
278	u8 priority;
279	/* Pkt Trasnit Power control */
280	u8 powermgmt;
281	/* Time the packet has been queued in the driver (units = 2ms) */
282	u8 pktdelay_2ms;
283	/* reserved */
284	u8 reserved1;
285} __packed;
286
287/* RxPD Descriptor */
288struct rxpd {
289	/* Current Rx packet status */
290	__le16 status;
291
292	/* SNR */
293	u8 snr;
294
295	/* Tx control */
296	u8 rx_control;
297
298	/* Pkt length */
299	__le16 pkt_len;
300
301	/* Noise Floor */
302	u8 nf;
303
304	/* Rx Packet Rate */
305	u8 rx_rate;
306
307	/* Pkt addr */
308	__le32 pkt_ptr;
309
310	/* Next Rx RxPD addr */
311	__le32 next_rxpd_ptr;
312
313	/* Pkt Priority */
314	u8 priority;
315	u8 reserved[3];
316} __packed;
317
318struct cmd_header {
319	__le16 command;
320	__le16 size;
321	__le16 seqnum;
322	__le16 result;
323} __packed;
324
325struct cmd_ctrl_node {
326	struct list_head list;
327	int result;
328	/* command response */
329	int (*callback)(struct lbtf_private *,
330			unsigned long, struct cmd_header *);
331	unsigned long callback_arg;
332	/* command data */
333	struct cmd_header *cmdbuf;
334	/* wait queue */
335	u16 cmdwaitqwoken;
336	wait_queue_head_t cmdwait_q;
337};
338
339/*
340 * Define data structure for CMD_GET_HW_SPEC
341 * This structure defines the response for the GET_HW_SPEC command
342 */
343struct cmd_ds_get_hw_spec {
344	struct cmd_header hdr;
345
346	/* HW Interface version number */
347	__le16 hwifversion;
348	/* HW version number */
349	__le16 version;
350	/* Max number of TxPD FW can handle */
351	__le16 nr_txpd;
352	/* Max no of Multicast address */
353	__le16 nr_mcast_adr;
354	/* MAC address */
355	u8 permanentaddr[6];
356
357	/* region Code */
358	__le16 regioncode;
359
360	/* Number of antenna used */
361	__le16 nr_antenna;
362
363	/* FW release number, example 0x01030304 = 2.3.4p1 */
364	__le32 fwrelease;
365
366	/* Base Address of TxPD queue */
367	__le32 wcb_base;
368	/* Read Pointer of RxPd queue */
369	__le32 rxpd_rdptr;
370
371	/* Write Pointer of RxPd queue */
372	__le32 rxpd_wrptr;
373
374	/*FW/HW capability */
375	__le32 fwcapinfo;
376} __packed;
377
378struct cmd_ds_mac_control {
379	struct cmd_header hdr;
380	__le16 action;
381	u16 reserved;
382} __packed;
383
384struct cmd_ds_802_11_mac_address {
385	struct cmd_header hdr;
386
387	__le16 action;
388	uint8_t macadd[ETH_ALEN];
389} __packed;
390
391struct cmd_ds_mac_multicast_addr {
392	struct cmd_header hdr;
393
394	__le16 action;
395	__le16 nr_of_adrs;
396	u8 maclist[ETH_ALEN * MRVDRV_MAX_MULTICAST_LIST_SIZE];
397} __packed;
398
399struct cmd_ds_set_mode {
400	struct cmd_header hdr;
401
402	__le16 mode;
403} __packed;
404
405struct cmd_ds_set_bssid {
406	struct cmd_header hdr;
407
408	u8 bssid[6];
409	u8 activate;
410} __packed;
411
412struct cmd_ds_802_11_radio_control {
413	struct cmd_header hdr;
414
415	__le16 action;
416	__le16 control;
417} __packed;
418
419
420struct cmd_ds_802_11_rf_channel {
421	struct cmd_header hdr;
422
423	__le16 action;
424	__le16 channel;
425	__le16 rftype;      /* unused */
426	__le16 reserved;    /* unused */
427	u8 channellist[32]; /* unused */
428} __packed;
429
430struct cmd_ds_set_boot2_ver {
431	struct cmd_header hdr;
432
433	__le16 action;
434	__le16 version;
435} __packed;
436
437struct cmd_ds_802_11_reset {
438	struct cmd_header hdr;
439
440	__le16 action;
441} __packed;
442
443struct cmd_ds_802_11_beacon_control {
444	struct cmd_header hdr;
445
446	__le16 action;
447	__le16 beacon_enable;
448	__le16 beacon_period;
449} __packed;
450
451struct cmd_ds_802_11_beacon_set {
452	struct cmd_header hdr;
453
454	__le16 len;
455	u8 beacon[MRVL_MAX_BCN_SIZE];
456} __packed;
457
458struct cmd_ctrl_node;
459
460/** Function Prototype Declaration */
461void lbtf_set_mac_control(struct lbtf_private *priv);
462
463int lbtf_free_cmd_buffer(struct lbtf_private *priv);
464
465int lbtf_allocate_cmd_buffer(struct lbtf_private *priv);
466int lbtf_execute_next_command(struct lbtf_private *priv);
467int lbtf_set_radio_control(struct lbtf_private *priv);
468int lbtf_update_hw_spec(struct lbtf_private *priv);
469int lbtf_cmd_set_mac_multicast_addr(struct lbtf_private *priv);
470void lbtf_set_mode(struct lbtf_private *priv, enum lbtf_mode mode);
471void lbtf_set_bssid(struct lbtf_private *priv, bool activate, const u8 *bssid);
472int lbtf_set_mac_address(struct lbtf_private *priv, uint8_t *mac_addr);
473
474int lbtf_set_channel(struct lbtf_private *priv, u8 channel);
475
476int lbtf_beacon_set(struct lbtf_private *priv, struct sk_buff *beacon);
477int lbtf_beacon_ctrl(struct lbtf_private *priv, bool beacon_enable,
478		     int beacon_int);
479
480
481int lbtf_process_rx_command(struct lbtf_private *priv);
482void lbtf_complete_command(struct lbtf_private *priv, struct cmd_ctrl_node *cmd,
483			  int result);
484void lbtf_cmd_response_rx(struct lbtf_private *priv);
485
486/* main.c */
487struct lbtf_private *lbtf_add_card(void *card, struct device *dmdev,
488				   const struct lbtf_ops *ops);
489int lbtf_remove_card(struct lbtf_private *priv);
490int lbtf_rx(struct lbtf_private *priv, struct sk_buff *skb);
491void lbtf_send_tx_feedback(struct lbtf_private *priv, u8 retrycnt, u8 fail);
492void lbtf_bcn_sent(struct lbtf_private *priv);
493
494/* support functions for cmd.c */
495/* lbtf_cmd() infers the size of the buffer to copy data back into, from
496   the size of the target of the pointer. Since the command to be sent
497   may often be smaller, that size is set in cmd->size by the caller.*/
498#define lbtf_cmd(priv, cmdnr, cmd, cb, cb_arg)	({		\
499	uint16_t __sz = le16_to_cpu((cmd)->hdr.size);		\
500	(cmd)->hdr.size = cpu_to_le16(sizeof(*(cmd)));		\
501	__lbtf_cmd(priv, cmdnr, &(cmd)->hdr, __sz, cb, cb_arg);	\
502})
503
504#define lbtf_cmd_with_response(priv, cmdnr, cmd)	\
505	lbtf_cmd(priv, cmdnr, cmd, lbtf_cmd_copyback, (unsigned long) (cmd))
506
507void lbtf_cmd_async(struct lbtf_private *priv, uint16_t command,
508	struct cmd_header *in_cmd, int in_cmd_size);
509
510int __lbtf_cmd(struct lbtf_private *priv, uint16_t command,
511	      struct cmd_header *in_cmd, int in_cmd_size,
512	      int (*callback)(struct lbtf_private *, unsigned long,
513			      struct cmd_header *),
514	      unsigned long callback_arg);
515
516int lbtf_cmd_copyback(struct lbtf_private *priv, unsigned long extra,
517		     struct cmd_header *resp);
~/ Read-only file preview.