FILE
location.h
File preview with syntax highlighting.
linux-6.19.14/drivers/net/wireless/intel/iwlwifi/fw/api/location.h
1/* SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause */ 2/* 3 * Copyright (C) 2015-2017 Intel Deutschland GmbH 4 * Copyright (C) 2018-2022 Intel Corporation 5 * Copyright (C) 2024-2025 Intel Corporation 6 */ 7#ifndef __iwl_fw_api_location_h__ 8#define __iwl_fw_api_location_h__ 9#include <linux/ieee80211.h> 10#include <linux/if_ether.h> 11#include <linux/types.h> 12#include <linux/bits.h> 13#include "rs.h" 14 15/** 16 * enum iwl_location_subcmd_ids - location group command IDs 17 */ 18enum iwl_location_subcmd_ids { 19 /** 20 * @TOF_RANGE_REQ_CMD: TOF ranging request, 21 * uses one of &struct iwl_tof_range_req_cmd_v5, 22 * &struct iwl_tof_range_req_cmd_v7, 23 * &struct iwl_tof_range_req_cmd_v8, 24 * &struct iwl_tof_range_req_cmd_v9, 25 * &struct iwl_tof_range_req_cmd_v11, 26 * &struct iwl_tof_range_req_cmd_v7 27 */ 28 TOF_RANGE_REQ_CMD = 0x0, 29 /** 30 * @TOF_CONFIG_CMD: TOF configuration, uses &struct iwl_tof_config_cmd 31 */ 32 TOF_CONFIG_CMD = 0x1, 33 /** 34 * @TOF_RANGE_ABORT_CMD: abort ongoing ranging, uses 35 * &struct iwl_tof_range_abort_cmd 36 */ 37 TOF_RANGE_ABORT_CMD = 0x2, 38 /** 39 * @TOF_RANGE_REQ_EXT_CMD: TOF extended ranging config, 40 * uses &struct iwl_tof_range_req_ext_cmd 41 */ 42 TOF_RANGE_REQ_EXT_CMD = 0x3, 43 /** 44 * @TOF_RESPONDER_CONFIG_CMD: FTM responder configuration, one of 45 * &struct iwl_tof_responder_config_cmd_v6, 46 * &struct iwl_tof_responder_config_cmd_v7, 47 * &struct iwl_tof_responder_config_cmd_v8 or 48 * &struct iwl_tof_responder_config_cmd_v9 49 */ 50 TOF_RESPONDER_CONFIG_CMD = 0x4, 51 /** 52 * @TOF_RESPONDER_DYN_CONFIG_CMD: FTM dynamic configuration, 53 * uses &struct iwl_tof_responder_dyn_config_cmd 54 */ 55 TOF_RESPONDER_DYN_CONFIG_CMD = 0x5, 56 /** 57 * @CSI_HEADER_NOTIFICATION: CSI header 58 */ 59 CSI_HEADER_NOTIFICATION = 0xFA, 60 /** 61 * @CSI_CHUNKS_NOTIFICATION: CSI chunk, 62 * uses &struct iwl_csi_chunk_notification 63 */ 64 CSI_CHUNKS_NOTIFICATION = 0xFB, 65 /** 66 * @TOF_LC_NOTIF: used for LCI/civic location, contains just 67 * the action frame 68 */ 69 TOF_LC_NOTIF = 0xFC, 70 /** 71 * @TOF_RESPONDER_STATS: FTM responder statistics notification, 72 * uses &struct iwl_ftm_responder_stats 73 */ 74 TOF_RESPONDER_STATS = 0xFD, 75 /** 76 * @TOF_MCSI_DEBUG_NOTIF: MCSI debug notification, uses 77 * &struct iwl_tof_mcsi_notif 78 */ 79 TOF_MCSI_DEBUG_NOTIF = 0xFE, 80 /** 81 * @TOF_RANGE_RESPONSE_NOTIF: ranging response, using one of 82 * &struct iwl_tof_range_rsp_ntfy_v5, 83 * &struct iwl_tof_range_rsp_ntfy_v6, 84 * &struct iwl_tof_range_rsp_ntfy_v7 or 85 * &struct iwl_tof_range_rsp_ntfy_v8 86 */ 87 TOF_RANGE_RESPONSE_NOTIF = 0xFF, 88}; 89 90/** 91 * struct iwl_tof_config_cmd - ToF configuration 92 * @tof_disabled: indicates if ToF is disabled (or not) 93 * @one_sided_disabled: indicates if one-sided is disabled (or not) 94 * @is_debug_mode: indiciates if debug mode is active 95 * @is_buf_required: indicates if channel estimation buffer is required 96 */ 97struct iwl_tof_config_cmd { 98 u8 tof_disabled; 99 u8 one_sided_disabled; 100 u8 is_debug_mode; 101 u8 is_buf_required; 102} __packed; 103 104/** 105 * enum iwl_tof_bandwidth - values for iwl_tof_range_req_ap_entry.bandwidth 106 * @IWL_TOF_BW_20_LEGACY: 20 MHz non-HT 107 * @IWL_TOF_BW_20_HT: 20 MHz HT 108 * @IWL_TOF_BW_40: 40 MHz 109 * @IWL_TOF_BW_80: 80 MHz 110 * @IWL_TOF_BW_160: 160 MHz 111 * @IWL_TOF_BW_NUM: number of tof bandwidths 112 */ 113enum iwl_tof_bandwidth { 114 IWL_TOF_BW_20_LEGACY, 115 IWL_TOF_BW_20_HT, 116 IWL_TOF_BW_40, 117 IWL_TOF_BW_80, 118 IWL_TOF_BW_160, 119 IWL_TOF_BW_NUM, 120}; /* LOCAT_BW_TYPE_E */ 121 122/* 123 * enum iwl_tof_algo_type - Algorithym type for range measurement request 124 */ 125enum iwl_tof_algo_type { 126 IWL_TOF_ALGO_TYPE_MAX_LIKE = 0, 127 IWL_TOF_ALGO_TYPE_LINEAR_REG = 1, 128 IWL_TOF_ALGO_TYPE_FFT = 2, 129 130 /* Keep last */ 131 IWL_TOF_ALGO_TYPE_INVALID, 132}; /* ALGO_TYPE_E */ 133 134/* 135 * enum iwl_tof_mcsi_ntfy - Enable/Disable MCSI notifications 136 */ 137enum iwl_tof_mcsi_enable { 138 IWL_TOF_MCSI_DISABLED = 0, 139 IWL_TOF_MCSI_ENABLED = 1, 140}; /* MCSI_ENABLE_E */ 141 142/** 143 * enum iwl_tof_responder_cmd_valid_field - valid fields in the responder cfg 144 * @IWL_TOF_RESPONDER_CMD_VALID_CHAN_INFO: channel info is valid 145 * @IWL_TOF_RESPONDER_CMD_VALID_TOA_OFFSET: ToA offset is valid 146 * @IWL_TOF_RESPONDER_CMD_VALID_COMMON_CALIB: common calibration mode is valid 147 * @IWL_TOF_RESPONDER_CMD_VALID_SPECIFIC_CALIB: spefici calibration mode is 148 * valid 149 * @IWL_TOF_RESPONDER_CMD_VALID_BSSID: BSSID is valid 150 * @IWL_TOF_RESPONDER_CMD_VALID_TX_ANT: TX antenna is valid 151 * @IWL_TOF_RESPONDER_CMD_VALID_ALGO_TYPE: algorithm type is valid 152 * @IWL_TOF_RESPONDER_CMD_VALID_NON_ASAP_SUPPORT: non-ASAP support is valid 153 * @IWL_TOF_RESPONDER_CMD_VALID_STATISTICS_REPORT_SUPPORT: statistics report 154 * support is valid 155 * @IWL_TOF_RESPONDER_CMD_VALID_MCSI_NOTIF_SUPPORT: MCSI notification support 156 * is valid 157 * @IWL_TOF_RESPONDER_CMD_VALID_FAST_ALGO_SUPPORT: fast algorithm support 158 * is valid 159 * @IWL_TOF_RESPONDER_CMD_VALID_RETRY_ON_ALGO_FAIL: retry on algorithm failure 160 * is valid 161 * @IWL_TOF_RESPONDER_CMD_VALID_STA_ID: station ID is valid 162 * @IWL_TOF_RESPONDER_CMD_VALID_NDP_SUPPORT: enable/disable NDP ranging support 163 * is valid 164 * @IWL_TOF_RESPONDER_CMD_VALID_NDP_PARAMS: NDP parameters are valid 165 * @IWL_TOF_RESPONDER_CMD_VALID_LMR_FEEDBACK: LMR feedback support is valid 166 * @IWL_TOF_RESPONDER_CMD_VALID_SESSION_ID: session id flag is valid 167 * @IWL_TOF_RESPONDER_CMD_VALID_BSS_COLOR: the bss_color field is valid 168 * @IWL_TOF_RESPONDER_CMD_VALID_MIN_MAX_TIME_BETWEEN_MSR: the 169 * min_time_between_msr and max_time_between_msr fields are valid 170 */ 171enum iwl_tof_responder_cmd_valid_field { 172 IWL_TOF_RESPONDER_CMD_VALID_CHAN_INFO = BIT(0), 173 IWL_TOF_RESPONDER_CMD_VALID_TOA_OFFSET = BIT(1), 174 IWL_TOF_RESPONDER_CMD_VALID_COMMON_CALIB = BIT(2), 175 IWL_TOF_RESPONDER_CMD_VALID_SPECIFIC_CALIB = BIT(3), 176 IWL_TOF_RESPONDER_CMD_VALID_BSSID = BIT(4), 177 IWL_TOF_RESPONDER_CMD_VALID_TX_ANT = BIT(5), 178 IWL_TOF_RESPONDER_CMD_VALID_ALGO_TYPE = BIT(6), 179 IWL_TOF_RESPONDER_CMD_VALID_NON_ASAP_SUPPORT = BIT(7), 180 IWL_TOF_RESPONDER_CMD_VALID_STATISTICS_REPORT_SUPPORT = BIT(8), 181 IWL_TOF_RESPONDER_CMD_VALID_MCSI_NOTIF_SUPPORT = BIT(9), 182 IWL_TOF_RESPONDER_CMD_VALID_FAST_ALGO_SUPPORT = BIT(10), 183 IWL_TOF_RESPONDER_CMD_VALID_RETRY_ON_ALGO_FAIL = BIT(11), 184 IWL_TOF_RESPONDER_CMD_VALID_STA_ID = BIT(12), 185 IWL_TOF_RESPONDER_CMD_VALID_NDP_SUPPORT = BIT(22), 186 IWL_TOF_RESPONDER_CMD_VALID_NDP_PARAMS = BIT(23), 187 IWL_TOF_RESPONDER_CMD_VALID_LMR_FEEDBACK = BIT(24), 188 IWL_TOF_RESPONDER_CMD_VALID_SESSION_ID = BIT(25), 189 IWL_TOF_RESPONDER_CMD_VALID_BSS_COLOR = BIT(26), 190 IWL_TOF_RESPONDER_CMD_VALID_MIN_MAX_TIME_BETWEEN_MSR = BIT(27), 191}; 192 193/** 194 * enum iwl_tof_responder_cfg_flags - responder configuration flags 195 * @IWL_TOF_RESPONDER_FLAGS_NON_ASAP_SUPPORT: non-ASAP support 196 * @IWL_TOF_RESPONDER_FLAGS_REPORT_STATISTICS: report statistics 197 * @IWL_TOF_RESPONDER_FLAGS_REPORT_MCSI: report MCSI 198 * @IWL_TOF_RESPONDER_FLAGS_ALGO_TYPE: algorithm type 199 * @IWL_TOF_RESPONDER_FLAGS_TOA_OFFSET_MODE: ToA offset mode 200 * @IWL_TOF_RESPONDER_FLAGS_COMMON_CALIB_MODE: common calibration mode 201 * @IWL_TOF_RESPONDER_FLAGS_SPECIFIC_CALIB_MODE: specific calibration mode 202 * @IWL_TOF_RESPONDER_FLAGS_FAST_ALGO_SUPPORT: fast algorithm support 203 * @IWL_TOF_RESPONDER_FLAGS_RETRY_ON_ALGO_FAIL: retry on algorithm fail 204 * @IWL_TOF_RESPONDER_FLAGS_FTM_TX_ANT: TX antenna mask 205 * @IWL_TOF_RESPONDER_FLAGS_NDP_SUPPORT: support NDP ranging 206 * @IWL_TOF_RESPONDER_FLAGS_LMR_FEEDBACK: request for LMR feedback if the 207 * initiator supports it 208 * @IWL_TOF_RESPONDER_FLAGS_SESSION_ID: send the session id in the initial FTM 209 * frame. 210 */ 211enum iwl_tof_responder_cfg_flags { 212 IWL_TOF_RESPONDER_FLAGS_NON_ASAP_SUPPORT = BIT(0), 213 IWL_TOF_RESPONDER_FLAGS_REPORT_STATISTICS = BIT(1), 214 IWL_TOF_RESPONDER_FLAGS_REPORT_MCSI = BIT(2), 215 IWL_TOF_RESPONDER_FLAGS_ALGO_TYPE = BIT(3) | BIT(4) | BIT(5), 216 IWL_TOF_RESPONDER_FLAGS_TOA_OFFSET_MODE = BIT(6), 217 IWL_TOF_RESPONDER_FLAGS_COMMON_CALIB_MODE = BIT(7), 218 IWL_TOF_RESPONDER_FLAGS_SPECIFIC_CALIB_MODE = BIT(8), 219 IWL_TOF_RESPONDER_FLAGS_FAST_ALGO_SUPPORT = BIT(9), 220 IWL_TOF_RESPONDER_FLAGS_RETRY_ON_ALGO_FAIL = BIT(10), 221 IWL_TOF_RESPONDER_FLAGS_FTM_TX_ANT = RATE_MCS_ANT_AB_MSK, 222 IWL_TOF_RESPONDER_FLAGS_NDP_SUPPORT = BIT(24), 223 IWL_TOF_RESPONDER_FLAGS_LMR_FEEDBACK = BIT(25), 224 IWL_TOF_RESPONDER_FLAGS_SESSION_ID = BIT(27), 225}; 226 227/** 228 * struct iwl_tof_responder_config_cmd_v6 - ToF AP mode (for debug) 229 * @cmd_valid_fields: &iwl_tof_responder_cmd_valid_field 230 * @responder_cfg_flags: &iwl_tof_responder_cfg_flags 231 * @bandwidth: current AP Bandwidth: &enum iwl_tof_bandwidth 232 * @rate: current AP rate 233 * @channel_num: current AP Channel 234 * @ctrl_ch_position: coding of the control channel position relative to 235 * the center frequency, see iwl_mvm_get_ctrl_pos() 236 * @sta_id: index of the AP STA when in AP mode 237 * @reserved1: reserved 238 * @toa_offset: Artificial addition [pSec] for the ToA - to be used for debug 239 * purposes, simulating station movement by adding various values 240 * to this field 241 * @common_calib: XVT: common calibration value 242 * @specific_calib: XVT: specific calibration value 243 * @bssid: Current AP BSSID 244 * @reserved2: reserved 245 */ 246struct iwl_tof_responder_config_cmd_v6 { 247 __le32 cmd_valid_fields; 248 __le32 responder_cfg_flags; 249 u8 bandwidth; 250 u8 rate; 251 u8 channel_num; 252 u8 ctrl_ch_position; 253 u8 sta_id; 254 u8 reserved1; 255 __le16 toa_offset; 256 __le16 common_calib; 257 __le16 specific_calib; 258 u8 bssid[ETH_ALEN]; 259 __le16 reserved2; 260} __packed; /* TOF_RESPONDER_CONFIG_CMD_API_S_VER_6 */ 261 262/** 263 * struct iwl_tof_responder_config_cmd_v7 - ToF AP mode (for debug) 264 * @cmd_valid_fields: &iwl_tof_responder_cmd_valid_field 265 * @responder_cfg_flags: &iwl_tof_responder_cfg_flags 266 * @format_bw: bits 0 - 3: &enum iwl_location_frame_format. 267 * bits 4 - 7: &enum iwl_location_bw. 268 * @rate: current AP rate 269 * @channel_num: current AP Channel 270 * @ctrl_ch_position: coding of the control channel position relative to 271 * the center frequency, see iwl_mvm_get_ctrl_pos() 272 * @sta_id: index of the AP STA when in AP mode 273 * @reserved1: reserved 274 * @toa_offset: Artificial addition [pSec] for the ToA - to be used for debug 275 * purposes, simulating station movement by adding various values 276 * to this field 277 * @common_calib: XVT: common calibration value 278 * @specific_calib: XVT: specific calibration value 279 * @bssid: Current AP BSSID 280 * @reserved2: reserved 281 */ 282struct iwl_tof_responder_config_cmd_v7 { 283 __le32 cmd_valid_fields; 284 __le32 responder_cfg_flags; 285 u8 format_bw; 286 u8 rate; 287 u8 channel_num; 288 u8 ctrl_ch_position; 289 u8 sta_id; 290 u8 reserved1; 291 __le16 toa_offset; 292 __le16 common_calib; 293 __le16 specific_calib; 294 u8 bssid[ETH_ALEN]; 295 __le16 reserved2; 296} __packed; /* TOF_RESPONDER_CONFIG_CMD_API_S_VER_7 */ 297 298#define IWL_RESPONDER_STS_POS 3 299#define IWL_RESPONDER_TOTAL_LTF_POS 6 300 301/** 302 * struct iwl_tof_responder_config_cmd_v8 - ToF AP mode (for debug) 303 * @cmd_valid_fields: &iwl_tof_responder_cmd_valid_field 304 * @responder_cfg_flags: &iwl_tof_responder_cfg_flags 305 * @format_bw: bits 0 - 3: &enum iwl_location_frame_format. 306 * bits 4 - 7: &enum iwl_location_bw. 307 * @rate: current AP rate 308 * @channel_num: current AP Channel 309 * @ctrl_ch_position: coding of the control channel position relative to 310 * the center frequency, see iwl_mvm_get_ctrl_pos() 311 * @sta_id: index of the AP STA when in AP mode 312 * @reserved1: reserved 313 * @toa_offset: Artificial addition [pSec] for the ToA - to be used for debug 314 * purposes, simulating station movement by adding various values 315 * to this field 316 * @common_calib: XVT: common calibration value 317 * @specific_calib: XVT: specific calibration value 318 * @bssid: Current AP BSSID 319 * @r2i_ndp_params: parameters for R2I NDP. 320 * bits 0 - 2: max number of LTF repetitions 321 * bits 3 - 5: max number of spatial streams (supported values are < 2) 322 * bits 6 - 7: max number of total LTFs see 323 * &enum ieee80211_range_params_max_total_ltf 324 * @i2r_ndp_params: parameters for I2R NDP. 325 * bits 0 - 2: max number of LTF repetitions 326 * bits 3 - 5: max number of spatial streams 327 * bits 6 - 7: max number of total LTFs see 328 * &enum ieee80211_range_params_max_total_ltf 329 */ 330struct iwl_tof_responder_config_cmd_v8 { 331 __le32 cmd_valid_fields; 332 __le32 responder_cfg_flags; 333 u8 format_bw; 334 u8 rate; 335 u8 channel_num; 336 u8 ctrl_ch_position; 337 u8 sta_id; 338 u8 reserved1; 339 __le16 toa_offset; 340 __le16 common_calib; 341 __le16 specific_calib; 342 u8 bssid[ETH_ALEN]; 343 u8 r2i_ndp_params; 344 u8 i2r_ndp_params; 345} __packed; /* TOF_RESPONDER_CONFIG_CMD_API_S_VER_8 */ 346 347/** 348 * struct iwl_tof_responder_config_cmd_v9 - ToF AP mode (for debug) 349 * @cmd_valid_fields: &iwl_tof_responder_cmd_valid_field 350 * @responder_cfg_flags: &iwl_tof_responder_cfg_flags 351 * @format_bw: bits 0 - 3: &enum iwl_location_frame_format. 352 * bits 4 - 7: &enum iwl_location_bw. 353 * @bss_color: current AP bss_color 354 * @channel_num: current AP Channel 355 * @ctrl_ch_position: coding of the control channel position relative to 356 * the center frequency, see iwl_mvm_get_ctrl_pos() 357 * @sta_id: index of the AP STA when in AP mode 358 * @reserved1: reserved 359 * @toa_offset: Artificial addition [pSec] for the ToA - to be used for debug 360 * purposes, simulating station movement by adding various values 361 * to this field 362 * @common_calib: XVT: common calibration value 363 * @specific_calib: XVT: specific calibration value 364 * @bssid: Current AP BSSID 365 * @r2i_ndp_params: parameters for R2I NDP. 366 * bits 0 - 2: max number of LTF repetitions 367 * bits 3 - 5: max number of spatial streams (supported values are < 2) 368 * bits 6 - 7: max number of total LTFs see 369 * &enum ieee80211_range_params_max_total_ltf 370 * @i2r_ndp_params: parameters for I2R NDP. 371 * bits 0 - 2: max number of LTF repetitions 372 * bits 3 - 5: max number of spatial streams 373 * bits 6 - 7: max number of total LTFs see 374 * &enum ieee80211_range_params_max_total_ltf 375 * @min_time_between_msr: for non trigger based NDP ranging, minimum time 376 * between measurements in milliseconds. 377 * @max_time_between_msr: for non trigger based NDP ranging, maximum time 378 * between measurements in milliseconds. 379 */ 380struct iwl_tof_responder_config_cmd_v9 { 381 __le32 cmd_valid_fields; 382 __le32 responder_cfg_flags; 383 u8 format_bw; 384 u8 bss_color; 385 u8 channel_num; 386 u8 ctrl_ch_position; 387 u8 sta_id; 388 u8 reserved1; 389 __le16 toa_offset; 390 __le16 common_calib; 391 __le16 specific_calib; 392 u8 bssid[ETH_ALEN]; 393 u8 r2i_ndp_params; 394 u8 i2r_ndp_params; 395 __le16 min_time_between_msr; 396 __le16 max_time_between_msr; 397} __packed; /* TOF_RESPONDER_CONFIG_CMD_API_S_VER_8 */ 398 399/** 400 * struct iwl_tof_responder_config_cmd - ToF AP mode 401 * @cmd_valid_fields: &iwl_tof_responder_cmd_valid_field 402 * @responder_cfg_flags: &iwl_tof_responder_cfg_flags 403 * @format_bw: bits 0 - 3: &enum iwl_location_frame_format. 404 * bits 4 - 7: &enum iwl_location_bw. 405 * @bss_color: current AP bss_color 406 * @channel_num: current AP Channel 407 * @ctrl_ch_position: coding of the control channel position relative to 408 * the center frequency, see iwl_mvm_get_ctrl_pos() 409 * @sta_id: index of the AP STA when in AP mode 410 * @band: current AP band 411 * @toa_offset: Artificial addition [pSec] for the ToA - to be used for debug 412 * purposes, simulating station movement by adding various values 413 * to this field 414 * @common_calib: XVT: common calibration value 415 * @specific_calib: XVT: specific calibration value 416 * @bssid: Current AP BSSID 417 * @r2i_ndp_params: parameters for R2I NDP. 418 * bits 0 - 2: max number of LTF repetitions 419 * bits 3 - 5: max number of spatial streams (supported values are < 2) 420 * bits 6 - 7: max number of total LTFs see 421 * &enum ieee80211_range_params_max_total_ltf 422 * @i2r_ndp_params: parameters for I2R NDP. 423 * bits 0 - 2: max number of LTF repetitions 424 * bits 3 - 5: max number of spatial streams 425 * bits 6 - 7: max number of total LTFs see 426 * &enum ieee80211_range_params_max_total_ltf 427 * @min_time_between_msr: for non trigger based NDP ranging, minimum time 428 * between measurements in milliseconds. 429 * @max_time_between_msr: for non trigger based NDP ranging, maximum time 430 * between measurements in milliseconds. 431 */ 432struct iwl_tof_responder_config_cmd { 433 __le32 cmd_valid_fields; 434 __le32 responder_cfg_flags; 435 u8 format_bw; 436 u8 bss_color; 437 u8 channel_num; 438 u8 ctrl_ch_position; 439 u8 sta_id; 440 u8 band; 441 __le16 toa_offset; 442 __le16 common_calib; 443 __le16 specific_calib; 444 u8 bssid[ETH_ALEN]; 445 u8 r2i_ndp_params; 446 u8 i2r_ndp_params; 447 __le16 min_time_between_msr; 448 __le16 max_time_between_msr; 449} __packed; /* TOF_RESPONDER_CONFIG_CMD_API_S_VER_10 */ 450 451#define IWL_LCI_CIVIC_IE_MAX_SIZE 400 452 453/** 454 * struct iwl_tof_responder_dyn_config_cmd_v2 - Dynamic responder settings 455 * @lci_len: The length of the 1st (LCI) part in the @lci_civic buffer 456 * @civic_len: The length of the 2nd (CIVIC) part in the @lci_civic buffer 457 * @lci_civic: The LCI/CIVIC buffer. LCI data (if exists) comes first, then, if 458 * needed, 0-padding such that the next part is dword-aligned, then CIVIC 459 * data (if exists) follows, and then 0-padding again to complete a 460 * 4-multiple long buffer. 461 */ 462struct iwl_tof_responder_dyn_config_cmd_v2 { 463 __le32 lci_len; 464 __le32 civic_len; 465 u8 lci_civic[]; 466} __packed; /* TOF_RESPONDER_DYN_CONFIG_CMD_API_S_VER_2 */ 467 468#define IWL_LCI_MAX_SIZE 160 469#define IWL_CIVIC_MAX_SIZE 160 470#define HLTK_11AZ_LEN 32 471 472/** 473 * enum iwl_responder_dyn_cfg_valid_flags - valid flags for dyn_config_cmd 474 * @IWL_RESPONDER_DYN_CFG_VALID_LCI: LCI data is valid 475 * @IWL_RESPONDER_DYN_CFG_VALID_CIVIC: Civic data is valid 476 * @IWL_RESPONDER_DYN_CFG_VALID_PASN_STA: the pasn_addr, HLTK and cipher fields 477 * are valid. 478 */ 479enum iwl_responder_dyn_cfg_valid_flags { 480 IWL_RESPONDER_DYN_CFG_VALID_LCI = BIT(0), 481 IWL_RESPONDER_DYN_CFG_VALID_CIVIC = BIT(1), 482 IWL_RESPONDER_DYN_CFG_VALID_PASN_STA = BIT(2), 483}; 484 485/** 486 * struct iwl_tof_responder_dyn_config_cmd - Dynamic responder settings 487 * @cipher: The negotiated cipher. see &enum iwl_location_cipher. 488 * @valid_flags: flags indicating which fields in the command are valid. see 489 * &enum iwl_responder_dyn_cfg_valid_flags. 490 * @lci_len: length of the LCI data in bytes 491 * @civic_len: length of the Civic data in bytes 492 * @lci_buf: the LCI buffer 493 * @civic_buf: the Civic buffer 494 * @hltk_buf: HLTK for secure LTF bits generation for the specified station 495 * @addr: mac address of the station for which to use the HLTK 496 * @reserved: for alignment 497 */ 498struct iwl_tof_responder_dyn_config_cmd { 499 u8 cipher; 500 u8 valid_flags; 501 u8 lci_len; 502 u8 civic_len; 503 u8 lci_buf[IWL_LCI_MAX_SIZE]; 504 u8 civic_buf[IWL_LCI_MAX_SIZE]; 505 u8 hltk_buf[HLTK_11AZ_LEN]; 506 u8 addr[ETH_ALEN]; 507 u8 reserved[2]; 508} __packed; /* TOF_RESPONDER_DYN_CONFIG_CMD_API_S_VER_3 */ 509 510/** 511 * struct iwl_tof_range_req_ext_cmd - extended range req for WLS 512 * @tsf_timer_offset_msec: the recommended time offset (mSec) from the AP's TSF 513 * @reserved: reserved 514 * @min_delta_ftm: Minimal time between two consecutive measurements, 515 * in units of 100us. 0 means no preference by station 516 * @ftm_format_and_bw20M: FTM Channel Spacing/Format for 20MHz: recommended 517 * value be sent to the AP 518 * @ftm_format_and_bw40M: FTM Channel Spacing/Format for 40MHz: recommended 519 * value to be sent to the AP 520 * @ftm_format_and_bw80M: FTM Channel Spacing/Format for 80MHz: recommended 521 * value to be sent to the AP 522 */ 523struct iwl_tof_range_req_ext_cmd { 524 __le16 tsf_timer_offset_msec; 525 __le16 reserved; 526 u8 min_delta_ftm; 527 u8 ftm_format_and_bw20M; 528 u8 ftm_format_and_bw40M; 529 u8 ftm_format_and_bw80M; 530} __packed; 531 532/** 533 * enum iwl_tof_location_query - values for query bitmap 534 * @IWL_TOF_LOC_LCI: query LCI 535 * @IWL_TOF_LOC_CIVIC: query civic 536 */ 537enum iwl_tof_location_query { 538 IWL_TOF_LOC_LCI = 0x01, 539 IWL_TOF_LOC_CIVIC = 0x02, 540}; 541 542 /** 543 * struct iwl_tof_range_req_ap_entry_v2 - AP configuration parameters 544 * @channel_num: Current AP Channel 545 * @bandwidth: Current AP Bandwidth. One of iwl_tof_bandwidth. 546 * @tsf_delta_direction: TSF relatively to the subject AP 547 * @ctrl_ch_position: Coding of the control channel position relative to the 548 * center frequency, see iwl_mvm_get_ctrl_pos(). 549 * @bssid: AP's BSSID 550 * @measure_type: Measurement type: 0 - two sided, 1 - One sided 551 * @num_of_bursts: Recommended value to be sent to the AP. 2s Exponent of the 552 * number of measurement iterations (min 2^0 = 1, max 2^14) 553 * @burst_period: Recommended value to be sent to the AP. Measurement 554 * periodicity In units of 100ms. ignored if num_of_bursts = 0 555 * @samples_per_burst: 2-sided: the number of FTMs pairs in single Burst (1-31); 556 * 1-sided: how many rts/cts pairs should be used per burst. 557 * @retries_per_sample: Max number of retries that the LMAC should send 558 * in case of no replies by the AP. 559 * @tsf_delta: TSF Delta in units of microseconds. 560 * The difference between the AP TSF and the device local clock. 561 * @location_req: Location Request Bit[0] LCI should be sent in the FTMR; 562 * Bit[1] Civic should be sent in the FTMR 563 * @asap_mode: 0 - non asap mode, 1 - asap mode (not relevant for one sided) 564 * @enable_dyn_ack: Enable Dynamic ACK BW. 565 * 0: Initiator interact with regular AP; 566 * 1: Initiator interact with Responder machine: need to send the 567 * Initiator Acks with HT 40MHz / 80MHz, since the Responder should 568 * use it for its ch est measurement (this flag will be set when we 569 * configure the opposite machine to be Responder). 570 * @rssi: Last received value 571 * legal values: -128-0 (0x7f). above 0x0 indicating an invalid value. 572 * @algo_type: &enum iwl_tof_algo_type 573 * @notify_mcsi: &enum iwl_tof_mcsi_ntfy. 574 * @reserved: For alignment and future use 575 */ 576struct iwl_tof_range_req_ap_entry_v2 { 577 u8 channel_num; 578 u8 bandwidth; 579 u8 tsf_delta_direction; 580 u8 ctrl_ch_position; 581 u8 bssid[ETH_ALEN]; 582 u8 measure_type; 583 u8 num_of_bursts; 584 __le16 burst_period; 585 u8 samples_per_burst; 586 u8 retries_per_sample; 587 __le32 tsf_delta; 588 u8 location_req; 589 u8 asap_mode; 590 u8 enable_dyn_ack; 591 s8 rssi; 592 u8 algo_type; 593 u8 notify_mcsi; 594 __le16 reserved; 595} __packed; /* LOCATION_RANGE_REQ_AP_ENTRY_CMD_API_S_VER_2 */ 596 597/** 598 * enum iwl_initiator_ap_flags - per responder FTM configuration flags 599 * @IWL_INITIATOR_AP_FLAGS_ASAP: Request for ASAP measurement. 600 * @IWL_INITIATOR_AP_FLAGS_LCI_REQUEST: Request for LCI information 601 * @IWL_INITIATOR_AP_FLAGS_CIVIC_REQUEST: Request for CIVIC information 602 * @IWL_INITIATOR_AP_FLAGS_DYN_ACK: Send HT/VHT ack for FTM frames. If not set, 603 * 20Mhz dup acks will be sent. 604 * @IWL_INITIATOR_AP_FLAGS_ALGO_LR: Use LR algo type for rtt calculation. 605 * Default algo type is ML. 606 * @IWL_INITIATOR_AP_FLAGS_ALGO_FFT: Use FFT algo type for rtt calculation. 607 * Default algo type is ML. 608 * @IWL_INITIATOR_AP_FLAGS_MCSI_REPORT: Send the MCSI for each FTM frame to the 609 * driver. 610 * @IWL_INITIATOR_AP_FLAGS_NON_TB: Use non trigger based flow 611 * @IWL_INITIATOR_AP_FLAGS_TB: Use trigger based flow 612 * @IWL_INITIATOR_AP_FLAGS_SECURED: request secure LTF measurement 613 * @IWL_INITIATOR_AP_FLAGS_LMR_FEEDBACK: Send LMR feedback 614 * @IWL_INITIATOR_AP_FLAGS_USE_CALIB: Use calibration values from the request 615 * instead of fw internal values. 616 * @IWL_INITIATOR_AP_FLAGS_PMF: request to protect the negotiation and LMR 617 * frames with protected management frames. 618 * @IWL_INITIATOR_AP_FLAGS_TERMINATE_ON_LMR_FEEDBACK: terminate the session if 619 * the responder asked for LMR feedback although the initiator did not set 620 * the LMR feedback bit in the FTM request. If not set, the initiator will 621 * continue with the session and will provide the LMR feedback. 622 * @IWL_INITIATOR_AP_FLAGS_TEST_INCORRECT_SAC: send an incorrect SAC in the 623 * first NDP exchange. This is used for testing. 624 * @IWL_INITIATOR_AP_FLAGS_TEST_BAD_SLTF: use incorrect secure LTF tx key. This 625 * is used for testing. Only supported from version 15 of the range request 626 * command. 627 */ 628enum iwl_initiator_ap_flags { 629 IWL_INITIATOR_AP_FLAGS_ASAP = BIT(1), 630 IWL_INITIATOR_AP_FLAGS_LCI_REQUEST = BIT(2), 631 IWL_INITIATOR_AP_FLAGS_CIVIC_REQUEST = BIT(3), 632 IWL_INITIATOR_AP_FLAGS_DYN_ACK = BIT(4), 633 IWL_INITIATOR_AP_FLAGS_ALGO_LR = BIT(5), 634 IWL_INITIATOR_AP_FLAGS_ALGO_FFT = BIT(6), 635 IWL_INITIATOR_AP_FLAGS_MCSI_REPORT = BIT(8), 636 IWL_INITIATOR_AP_FLAGS_NON_TB = BIT(9), 637 IWL_INITIATOR_AP_FLAGS_TB = BIT(10), 638 IWL_INITIATOR_AP_FLAGS_SECURED = BIT(11), 639 IWL_INITIATOR_AP_FLAGS_LMR_FEEDBACK = BIT(12), 640 IWL_INITIATOR_AP_FLAGS_USE_CALIB = BIT(13), 641 IWL_INITIATOR_AP_FLAGS_PMF = BIT(14), 642 IWL_INITIATOR_AP_FLAGS_TERMINATE_ON_LMR_FEEDBACK = BIT(15), 643 IWL_INITIATOR_AP_FLAGS_TEST_INCORRECT_SAC = BIT(16), 644 IWL_INITIATOR_AP_FLAGS_TEST_BAD_SLTF = BIT(17), 645}; 646 647/** 648 * struct iwl_tof_range_req_ap_entry_v3 - AP configuration parameters 649 * @initiator_ap_flags: see &enum iwl_initiator_ap_flags. 650 * @channel_num: AP Channel number 651 * @bandwidth: AP bandwidth. One of iwl_tof_bandwidth. 652 * @ctrl_ch_position: Coding of the control channel position relative to the 653 * center frequency, see iwl_mvm_get_ctrl_pos(). 654 * @ftmr_max_retries: Max number of retries to send the FTMR in case of no 655 * reply from the AP. 656 * @bssid: AP's BSSID 657 * @burst_period: Recommended value to be sent to the AP. Measurement 658 * periodicity In units of 100ms. ignored if num_of_bursts_exp = 0 659 * @samples_per_burst: the number of FTMs pairs in single Burst (1-31); 660 * @num_of_bursts: Recommended value to be sent to the AP. 2s Exponent of 661 * the number of measurement iterations (min 2^0 = 1, max 2^14) 662 * @reserved: For alignment and future use 663 * @tsf_delta: not in use 664 */ 665struct iwl_tof_range_req_ap_entry_v3 { 666 __le32 initiator_ap_flags; 667 u8 channel_num; 668 u8 bandwidth; 669 u8 ctrl_ch_position; 670 u8 ftmr_max_retries; 671 u8 bssid[ETH_ALEN]; 672 __le16 burst_period; 673 u8 samples_per_burst; 674 u8 num_of_bursts; 675 __le16 reserved; 676 __le32 tsf_delta; 677} __packed; /* LOCATION_RANGE_REQ_AP_ENTRY_CMD_API_S_VER_3 */ 678 679/** 680 * enum iwl_location_frame_format - location frame formats 681 * @IWL_LOCATION_FRAME_FORMAT_LEGACY: legacy 682 * @IWL_LOCATION_FRAME_FORMAT_HT: HT 683 * @IWL_LOCATION_FRAME_FORMAT_VHT: VHT 684 * @IWL_LOCATION_FRAME_FORMAT_HE: HE 685 */ 686enum iwl_location_frame_format { 687 IWL_LOCATION_FRAME_FORMAT_LEGACY, 688 IWL_LOCATION_FRAME_FORMAT_HT, 689 IWL_LOCATION_FRAME_FORMAT_VHT, 690 IWL_LOCATION_FRAME_FORMAT_HE, 691}; 692 693/** 694 * enum iwl_location_bw - location bandwidth selection 695 * @IWL_LOCATION_BW_20MHZ: 20MHz 696 * @IWL_LOCATION_BW_40MHZ: 40MHz 697 * @IWL_LOCATION_BW_80MHZ: 80MHz 698 * @IWL_LOCATION_BW_160MHZ: 160MHz 699 */ 700enum iwl_location_bw { 701 IWL_LOCATION_BW_20MHZ, 702 IWL_LOCATION_BW_40MHZ, 703 IWL_LOCATION_BW_80MHZ, 704 IWL_LOCATION_BW_160MHZ, 705}; 706 707#define TK_11AZ_LEN 32 708 709#define LOCATION_BW_POS 4 710 711/** 712 * struct iwl_tof_range_req_ap_entry_v4 - AP configuration parameters 713 * @initiator_ap_flags: see &enum iwl_initiator_ap_flags. 714 * @channel_num: AP Channel number 715 * @format_bw: bits 0 - 3: &enum iwl_location_frame_format. 716 * bits 4 - 7: &enum iwl_location_bw. 717 * @ctrl_ch_position: Coding of the control channel position relative to the 718 * center frequency, see iwl_mvm_get_ctrl_pos(). 719 * @ftmr_max_retries: Max number of retries to send the FTMR in case of no 720 * reply from the AP. 721 * @bssid: AP's BSSID 722 * @burst_period: Recommended value to be sent to the AP. Measurement 723 * periodicity In units of 100ms. ignored if num_of_bursts_exp = 0 724 * @samples_per_burst: the number of FTMs pairs in single Burst (1-31); 725 * @num_of_bursts: Recommended value to be sent to the AP. 2s Exponent of 726 * the number of measurement iterations (min 2^0 = 1, max 2^14) 727 * @reserved: For alignment and future use 728 * @hltk: HLTK to be used for secured 11az measurement 729 * @tk: TK to be used for secured 11az measurement 730 */ 731struct iwl_tof_range_req_ap_entry_v4 { 732 __le32 initiator_ap_flags; 733 u8 channel_num; 734 u8 format_bw; 735 u8 ctrl_ch_position; 736 u8 ftmr_max_retries; 737 u8 bssid[ETH_ALEN]; 738 __le16 burst_period; 739 u8 samples_per_burst; 740 u8 num_of_bursts; 741 __le16 reserved; 742 u8 hltk[HLTK_11AZ_LEN]; 743 u8 tk[TK_11AZ_LEN]; 744} __packed; /* LOCATION_RANGE_REQ_AP_ENTRY_CMD_API_S_VER_4 */ 745 746/** 747 * enum iwl_location_cipher - location cipher selection 748 * @IWL_LOCATION_CIPHER_CCMP_128: CCMP 128 749 * @IWL_LOCATION_CIPHER_GCMP_128: GCMP 128 750 * @IWL_LOCATION_CIPHER_GCMP_256: GCMP 256 751 * @IWL_LOCATION_CIPHER_INVALID: security is not used. 752 * @IWL_LOCATION_CIPHER_MAX: maximum value for this enum. 753 */ 754enum iwl_location_cipher { 755 IWL_LOCATION_CIPHER_CCMP_128, 756 IWL_LOCATION_CIPHER_GCMP_128, 757 IWL_LOCATION_CIPHER_GCMP_256, 758 IWL_LOCATION_CIPHER_INVALID, 759 IWL_LOCATION_CIPHER_MAX, 760}; 761 762/** 763 * struct iwl_tof_range_req_ap_entry_v6 - AP configuration parameters 764 * @initiator_ap_flags: see &enum iwl_initiator_ap_flags. 765 * @channel_num: AP Channel number 766 * @format_bw: bits 0 - 3: &enum iwl_location_frame_format. 767 * bits 4 - 7: &enum iwl_location_bw. 768 * @ctrl_ch_position: Coding of the control channel position relative to the 769 * center frequency, see iwl_mvm_get_ctrl_pos(). 770 * @ftmr_max_retries: Max number of retries to send the FTMR in case of no 771 * reply from the AP. 772 * @bssid: AP's BSSID 773 * @burst_period: Recommended value to be sent to the AP. Measurement 774 * periodicity In units of 100ms. ignored if num_of_bursts_exp = 0 775 * @samples_per_burst: the number of FTMs pairs in single Burst (1-31); 776 * @num_of_bursts: Recommended value to be sent to the AP. 2s Exponent of 777 * the number of measurement iterations (min 2^0 = 1, max 2^14) 778 * @sta_id: the station id of the AP. Only relevant when associated to the AP, 779 * otherwise should be set to &IWL_INVALID_STA. 780 * @cipher: pairwise cipher suite for secured measurement. 781 * &enum iwl_location_cipher. 782 * @hltk: HLTK to be used for secured 11az measurement 783 * @tk: TK to be used for secured 11az measurement 784 * @calib: An array of calibration values per FTM rx bandwidth. 785 * If &IWL_INITIATOR_AP_FLAGS_USE_CALIB is set, the fw will use the 786 * calibration value that corresponds to the rx bandwidth of the FTM 787 * frame. 788 * @beacon_interval: beacon interval of the AP in TUs. Only required if 789 * &IWL_INITIATOR_AP_FLAGS_TB is set. 790 */ 791struct iwl_tof_range_req_ap_entry_v6 { 792 __le32 initiator_ap_flags; 793 u8 channel_num; 794 u8 format_bw; 795 u8 ctrl_ch_position; 796 u8 ftmr_max_retries; 797 u8 bssid[ETH_ALEN]; 798 __le16 burst_period; 799 u8 samples_per_burst; 800 u8 num_of_bursts; 801 u8 sta_id; 802 u8 cipher; 803 u8 hltk[HLTK_11AZ_LEN]; 804 u8 tk[TK_11AZ_LEN]; 805 __le16 calib[IWL_TOF_BW_NUM]; 806 __le16 beacon_interval; 807} __packed; /* LOCATION_RANGE_REQ_AP_ENTRY_CMD_API_S_VER_6 */ 808 809/** 810 * struct iwl_tof_range_req_ap_entry_v7 - AP configuration parameters 811 * @initiator_ap_flags: see &enum iwl_initiator_ap_flags. 812 * @channel_num: AP Channel number 813 * @format_bw: bits 0 - 3: &enum iwl_location_frame_format. 814 * bits 4 - 7: &enum iwl_location_bw. 815 * @ctrl_ch_position: Coding of the control channel position relative to the 816 * center frequency, see iwl_mvm_get_ctrl_pos(). 817 * @ftmr_max_retries: Max number of retries to send the FTMR in case of no 818 * reply from the AP. 819 * @bssid: AP's BSSID 820 * @burst_period: Recommended value to be sent to the AP. Measurement 821 * periodicity In units of 100ms. ignored if num_of_bursts_exp = 0 822 * @samples_per_burst: the number of FTMs pairs in single Burst (1-31); 823 * @num_of_bursts: Recommended value to be sent to the AP. 2s Exponent of 824 * the number of measurement iterations (min 2^0 = 1, max 2^14) 825 * @sta_id: the station id of the AP. Only relevant when associated to the AP, 826 * otherwise should be set to &IWL_INVALID_STA. 827 * @cipher: pairwise cipher suite for secured measurement. 828 * &enum iwl_location_cipher. 829 * @hltk: HLTK to be used for secured 11az measurement 830 * @tk: TK to be used for secured 11az measurement 831 * @calib: An array of calibration values per FTM rx bandwidth. 832 * If &IWL_INITIATOR_AP_FLAGS_USE_CALIB is set, the fw will use the 833 * calibration value that corresponds to the rx bandwidth of the FTM 834 * frame. 835 * @beacon_interval: beacon interval of the AP in TUs. Only required if 836 * &IWL_INITIATOR_AP_FLAGS_TB is set. 837 * @rx_pn: the next expected PN for protected management frames Rx. LE byte 838 * order. Only valid if &IWL_INITIATOR_AP_FLAGS_SECURED is set and sta_id 839 * is set to &IWL_INVALID_STA. 840 * @tx_pn: the next PN to use for protected management frames Tx. LE byte 841 * order. Only valid if &IWL_INITIATOR_AP_FLAGS_SECURED is set and sta_id 842 * is set to &IWL_INVALID_STA. 843 */ 844struct iwl_tof_range_req_ap_entry_v7 { 845 __le32 initiator_ap_flags; 846 u8 channel_num; 847 u8 format_bw; 848 u8 ctrl_ch_position; 849 u8 ftmr_max_retries; 850 u8 bssid[ETH_ALEN]; 851 __le16 burst_period; 852 u8 samples_per_burst; 853 u8 num_of_bursts; 854 u8 sta_id; 855 u8 cipher; 856 u8 hltk[HLTK_11AZ_LEN]; 857 u8 tk[TK_11AZ_LEN]; 858 __le16 calib[IWL_TOF_BW_NUM]; 859 __le16 beacon_interval; 860 u8 rx_pn[IEEE80211_CCMP_PN_LEN]; 861 u8 tx_pn[IEEE80211_CCMP_PN_LEN]; 862} __packed; /* LOCATION_RANGE_REQ_AP_ENTRY_CMD_API_S_VER_7 */ 863 864#define IWL_LOCATION_MAX_STS_POS 3 865#define IWL_LOCATION_TOTAL_LTF_POS 6 866 867/** 868 * struct iwl_tof_range_req_ap_entry_v8 - AP configuration parameters 869 * @initiator_ap_flags: see &enum iwl_initiator_ap_flags. 870 * @channel_num: AP Channel number 871 * @format_bw: bits 0 - 3: &enum iwl_location_frame_format. 872 * bits 4 - 7: &enum iwl_location_bw. 873 * @ctrl_ch_position: Coding of the control channel position relative to the 874 * center frequency, see iwl_mvm_get_ctrl_pos(). 875 * @ftmr_max_retries: Max number of retries to send the FTMR in case of no 876 * reply from the AP. 877 * @bssid: AP's BSSID 878 * @burst_period: Recommended value to be sent to the AP. Measurement 879 * periodicity In units of 100ms. ignored if num_of_bursts_exp = 0 880 * @samples_per_burst: the number of FTMs pairs in single Burst (1-31); 881 * @num_of_bursts: Recommended value to be sent to the AP. 2s Exponent of 882 * the number of measurement iterations (min 2^0 = 1, max 2^14) 883 * @sta_id: the station id of the AP. Only relevant when associated to the AP, 884 * otherwise should be set to &IWL_INVALID_STA. 885 * @cipher: pairwise cipher suite for secured measurement. 886 * &enum iwl_location_cipher. 887 * @hltk: HLTK to be used for secured 11az measurement 888 * @tk: TK to be used for secured 11az measurement 889 * @calib: An array of calibration values per FTM rx bandwidth. 890 * If &IWL_INITIATOR_AP_FLAGS_USE_CALIB is set, the fw will use the 891 * calibration value that corresponds to the rx bandwidth of the FTM 892 * frame. 893 * @beacon_interval: beacon interval of the AP in TUs. Only required if 894 * &IWL_INITIATOR_AP_FLAGS_TB is set. 895 * @rx_pn: the next expected PN for protected management frames Rx. LE byte 896 * order. Only valid if &IWL_INITIATOR_AP_FLAGS_SECURED is set and sta_id 897 * is set to &IWL_INVALID_STA. 898 * @tx_pn: the next PN to use for protected management frames Tx. LE byte 899 * order. Only valid if &IWL_INITIATOR_AP_FLAGS_SECURED is set and sta_id 900 * is set to &IWL_INVALID_STA. 901 * @r2i_ndp_params: parameters for R2I NDP ranging negotiation. 902 * bits 0 - 2: max LTF repetitions 903 * bits 3 - 5: max number of spatial streams 904 * bits 6 - 7: reserved 905 * @i2r_ndp_params: parameters for I2R NDP ranging negotiation. 906 * bits 0 - 2: max LTF repetitions 907 * bits 3 - 5: max number of spatial streams (supported values are < 2) 908 * bits 6 - 7: reserved 909 * @r2i_max_total_ltf: R2I Max Total LTFs for NDP ranging negotiation. 910 * One of &enum ieee80211_range_params_max_total_ltf. 911 * @i2r_max_total_ltf: I2R Max Total LTFs for NDP ranging negotiation. 912 * One of &enum ieee80211_range_params_max_total_ltf. 913 */ 914struct iwl_tof_range_req_ap_entry_v8 { 915 __le32 initiator_ap_flags; 916 u8 channel_num; 917 u8 format_bw; 918 u8 ctrl_ch_position; 919 u8 ftmr_max_retries; 920 u8 bssid[ETH_ALEN]; 921 __le16 burst_period; 922 u8 samples_per_burst; 923 u8 num_of_bursts; 924 u8 sta_id; 925 u8 cipher; 926 u8 hltk[HLTK_11AZ_LEN]; 927 u8 tk[TK_11AZ_LEN]; 928 __le16 calib[IWL_TOF_BW_NUM]; 929 __le16 beacon_interval; 930 u8 rx_pn[IEEE80211_CCMP_PN_LEN]; 931 u8 tx_pn[IEEE80211_CCMP_PN_LEN]; 932 u8 r2i_ndp_params; 933 u8 i2r_ndp_params; 934 u8 r2i_max_total_ltf; 935 u8 i2r_max_total_ltf; 936} __packed; /* LOCATION_RANGE_REQ_AP_ENTRY_CMD_API_S_VER_8 */ 937 938/** 939 * struct iwl_tof_range_req_ap_entry_v9 - AP configuration parameters 940 * @initiator_ap_flags: see &enum iwl_initiator_ap_flags. 941 * @channel_num: AP Channel number 942 * @format_bw: bits 0 - 3: &enum iwl_location_frame_format. 943 * bits 4 - 7: &enum iwl_location_bw. 944 * @ctrl_ch_position: Coding of the control channel position relative to the 945 * center frequency, see iwl_mvm_get_ctrl_pos(). 946 * @ftmr_max_retries: Max number of retries to send the FTMR in case of no 947 * reply from the AP. 948 * @bssid: AP's BSSID 949 * @burst_period: For EDCA based ranging: Recommended value to be sent to the 950 * AP. Measurement periodicity In units of 100ms. ignored if 951 * num_of_bursts_exp = 0. 952 * For non trigger based NDP ranging, the maximum time between 953 * measurements in units of milliseconds. 954 * @samples_per_burst: the number of FTMs pairs in single Burst (1-31); 955 * @num_of_bursts: Recommended value to be sent to the AP. 2s Exponent of 956 * the number of measurement iterations (min 2^0 = 1, max 2^14) 957 * @sta_id: the station id of the AP. Only relevant when associated to the AP, 958 * otherwise should be set to &IWL_INVALID_STA. 959 * @cipher: pairwise cipher suite for secured measurement. 960 * &enum iwl_location_cipher. 961 * @hltk: HLTK to be used for secured 11az measurement 962 * @tk: TK to be used for secured 11az measurement 963 * @calib: An array of calibration values per FTM rx bandwidth. 964 * If &IWL_INITIATOR_AP_FLAGS_USE_CALIB is set, the fw will use the 965 * calibration value that corresponds to the rx bandwidth of the FTM 966 * frame. 967 * @beacon_interval: beacon interval of the AP in TUs. Only required if 968 * &IWL_INITIATOR_AP_FLAGS_TB is set. 969 * @bss_color: the BSS color of the responder. Only valid if 970 * &IWL_INITIATOR_AP_FLAGS_TB or &IWL_INITIATOR_AP_FLAGS_NON_TB is set. 971 * @rx_pn: the next expected PN for protected management frames Rx. LE byte 972 * order. Only valid if &IWL_INITIATOR_AP_FLAGS_SECURED is set and sta_id 973 * is set to &IWL_INVALID_STA. 974 * @tx_pn: the next PN to use for protected management frames Tx. LE byte 975 * order. Only valid if &IWL_INITIATOR_AP_FLAGS_SECURED is set and sta_id 976 * is set to &IWL_INVALID_STA. 977 * @r2i_ndp_params: parameters for R2I NDP ranging negotiation. 978 * bits 0 - 2: max LTF repetitions 979 * bits 3 - 5: max number of spatial streams 980 * bits 6 - 7: reserved 981 * @i2r_ndp_params: parameters for I2R NDP ranging negotiation. 982 * bits 0 - 2: max LTF repetitions 983 * bits 3 - 5: max number of spatial streams (supported values are < 2) 984 * bits 6 - 7: reserved 985 * @r2i_max_total_ltf: R2I Max Total LTFs for NDP ranging negotiation. 986 * One of &enum ieee80211_range_params_max_total_ltf. 987 * @i2r_max_total_ltf: I2R Max Total LTFs for NDP ranging negotiation. 988 * One of &enum ieee80211_range_params_max_total_ltf. 989 * @bss_color: the BSS color of the responder. Only valid if 990 * &IWL_INITIATOR_AP_FLAGS_NON_TB or &IWL_INITIATOR_AP_FLAGS_TB is set. 991 * @band: 0 for 5.2 GHz, 1 for 2.4 GHz, 2 for 6GHz 992 * @min_time_between_msr: For non trigger based NDP ranging, the minimum time 993 * between measurements in units of milliseconds 994 */ 995struct iwl_tof_range_req_ap_entry_v9 { 996 __le32 initiator_ap_flags; 997 u8 channel_num; 998 u8 format_bw; 999 u8 ctrl_ch_position; 1000 u8 ftmr_max_retries; 1001 u8 bssid[ETH_ALEN]; 1002 __le16 burst_period; 1003 u8 samples_per_burst; 1004 u8 num_of_bursts; 1005 u8 sta_id; 1006 u8 cipher; 1007 u8 hltk[HLTK_11AZ_LEN]; 1008 u8 tk[TK_11AZ_LEN]; 1009 __le16 calib[IWL_TOF_BW_NUM]; 1010 u16 beacon_interval; 1011 u8 rx_pn[IEEE80211_CCMP_PN_LEN]; 1012 u8 tx_pn[IEEE80211_CCMP_PN_LEN]; 1013 u8 r2i_ndp_params; 1014 u8 i2r_ndp_params; 1015 u8 r2i_max_total_ltf; 1016 u8 i2r_max_total_ltf; 1017 u8 bss_color; 1018 u8 band; 1019 __le16 min_time_between_msr; 1020} __packed; /* LOCATION_RANGE_REQ_AP_ENTRY_CMD_API_S_VER_9 */ 1021 1022/** 1023 * struct iwl_tof_range_req_ap_entry - AP configuration parameters 1024 * @initiator_ap_flags: see &enum iwl_initiator_ap_flags. 1025 * @band: 0 for 5.2 GHz, 1 for 2.4 GHz, 2 for 6GHz 1026 * @channel_num: AP Channel number 1027 * @format_bw: bits 0 - 3: &enum iwl_location_frame_format. 1028 * bits 4 - 7: &enum iwl_location_bw. 1029 * @ctrl_ch_position: Coding of the control channel position relative to the 1030 * center frequency, see iwl_mvm_get_ctrl_pos(). 1031 * @bssid: AP's BSSID 1032 * @burst_period: For EDCA based ranging: Recommended value to be sent to the 1033 * AP. Measurement periodicity In units of 100ms. ignored if 1034 * num_of_bursts_exp = 0. 1035 * For non trigger based NDP ranging, the maximum time between 1036 * measurements in units of milliseconds. 1037 * @samples_per_burst: the number of FTMs pairs in single Burst (1-31); 1038 * @num_of_bursts: Recommended value to be sent to the AP. 2s Exponent of 1039 * the number of measurement iterations (min 2^0 = 1, max 2^14) 1040 * @sta_id: the station id of the AP. Only relevant when associated to the AP, 1041 * otherwise should be set to &IWL_INVALID_STA. 1042 * @cipher: pairwise cipher suite for secured measurement. 1043 * &enum iwl_location_cipher. 1044 * @hltk: HLTK to be used for secured 11az measurement 1045 * @tk: TK to be used for secured 11az measurement 1046 * @calib: An array of calibration values per FTM rx bandwidth. 1047 * If &IWL_INITIATOR_AP_FLAGS_USE_CALIB is set, the fw will use the 1048 * calibration value that corresponds to the rx bandwidth of the FTM 1049 * frame. 1050 * @beacon_interval: beacon interval of the AP in TUs. Only required if 1051 * &IWL_INITIATOR_AP_FLAGS_TB is set. 1052 * @rx_pn: the next expected PN for protected management frames Rx. LE byte 1053 * order. Only valid if &IWL_INITIATOR_AP_FLAGS_SECURED is set and sta_id 1054 * is set to &IWL_INVALID_STA. 1055 * @tx_pn: the next PN to use for protected management frames Tx. LE byte 1056 * order. Only valid if &IWL_INITIATOR_AP_FLAGS_SECURED is set and sta_id 1057 * is set to &IWL_INVALID_STA. 1058 * @r2i_ndp_params: parameters for R2I NDP ranging negotiation. 1059 * bits 0 - 2: max LTF repetitions 1060 * bits 3 - 5: max number of spatial streams 1061 * bits 6 - 7: max total LTFs. One of 1062 * &enum ieee80211_range_params_max_total_ltf. 1063 * @i2r_ndp_params: parameters for I2R NDP ranging negotiation. 1064 * bits 0 - 2: max LTF repetitions 1065 * bits 3 - 5: max number of spatial streams (supported values are < 2) 1066 * bits 6 - 7: max total LTFs. One of 1067 * &enum ieee80211_range_params_max_total_ltf. 1068 * @min_time_between_msr: For non trigger based NDP ranging, the minimum time 1069 * between measurements in units of milliseconds 1070 */ 1071struct iwl_tof_range_req_ap_entry { 1072 __le32 initiator_ap_flags; 1073 u8 band; 1074 u8 channel_num; 1075 u8 format_bw; 1076 u8 ctrl_ch_position; 1077 u8 bssid[ETH_ALEN]; 1078 __le16 burst_period; 1079 u8 samples_per_burst; 1080 u8 num_of_bursts; 1081 u8 sta_id; 1082 u8 cipher; 1083 u8 hltk[HLTK_11AZ_LEN]; 1084 u8 tk[TK_11AZ_LEN]; 1085 __le16 calib[IWL_TOF_BW_NUM]; 1086 __le16 beacon_interval; 1087 u8 rx_pn[IEEE80211_CCMP_PN_LEN]; 1088 u8 tx_pn[IEEE80211_CCMP_PN_LEN]; 1089 u8 r2i_ndp_params; 1090 u8 i2r_ndp_params; 1091 __le16 min_time_between_msr; 1092} __packed; /* LOCATION_RANGE_REQ_AP_ENTRY_CMD_API_S_VER_9 */ 1093 1094/** 1095 * enum iwl_tof_response_mode - TOF response mode 1096 * @IWL_MVM_TOF_RESPONSE_ASAP: report each AP measurement separately as soon as 1097 * possible (not supported for this release) 1098 * @IWL_MVM_TOF_RESPONSE_TIMEOUT: report all AP measurements as a batch upon 1099 * timeout expiration 1100 * @IWL_MVM_TOF_RESPONSE_COMPLETE: report all AP measurements as a batch at the 1101 * earlier of: measurements completion / timeout 1102 * expiration. 1103 */ 1104enum iwl_tof_response_mode { 1105 IWL_MVM_TOF_RESPONSE_ASAP, 1106 IWL_MVM_TOF_RESPONSE_TIMEOUT, 1107 IWL_MVM_TOF_RESPONSE_COMPLETE, 1108}; 1109 1110/** 1111 * enum iwl_tof_initiator_flags - TOF initiator flags 1112 * 1113 * @IWL_TOF_INITIATOR_FLAGS_FAST_ALGO_DISABLED: disable fast algo, meaning run 1114 * the algo on ant A+B, instead of only one of them. 1115 * @IWL_TOF_INITIATOR_FLAGS_RX_CHAIN_SEL_A: open RX antenna A for FTMs RX 1116 * @IWL_TOF_INITIATOR_FLAGS_RX_CHAIN_SEL_B: open RX antenna B for FTMs RX 1117 * @IWL_TOF_INITIATOR_FLAGS_RX_CHAIN_SEL_C: open RX antenna C for FTMs RX 1118 * @IWL_TOF_INITIATOR_FLAGS_TX_CHAIN_SEL_A: use antenna A fo TX ACKs during FTM 1119 * @IWL_TOF_INITIATOR_FLAGS_TX_CHAIN_SEL_B: use antenna B fo TX ACKs during FTM 1120 * @IWL_TOF_INITIATOR_FLAGS_TX_CHAIN_SEL_C: use antenna C fo TX ACKs during FTM 1121 * @IWL_TOF_INITIATOR_FLAGS_MACADDR_RANDOM: use random mac address for FTM 1122 * @IWL_TOF_INITIATOR_FLAGS_SPECIFIC_CALIB: use the specific calib value from 1123 * the range request command 1124 * @IWL_TOF_INITIATOR_FLAGS_COMMON_CALIB: use the common calib value from the 1125 * ragne request command 1126 * @IWL_TOF_INITIATOR_FLAGS_NON_ASAP_SUPPORT: support non-asap measurements 1127 */ 1128enum iwl_tof_initiator_flags { 1129 IWL_TOF_INITIATOR_FLAGS_FAST_ALGO_DISABLED = BIT(0), 1130 IWL_TOF_INITIATOR_FLAGS_RX_CHAIN_SEL_A = BIT(1), 1131 IWL_TOF_INITIATOR_FLAGS_RX_CHAIN_SEL_B = BIT(2), 1132 IWL_TOF_INITIATOR_FLAGS_RX_CHAIN_SEL_C = BIT(3), 1133 IWL_TOF_INITIATOR_FLAGS_TX_CHAIN_SEL_A = BIT(4), 1134 IWL_TOF_INITIATOR_FLAGS_TX_CHAIN_SEL_B = BIT(5), 1135 IWL_TOF_INITIATOR_FLAGS_TX_CHAIN_SEL_C = BIT(6), 1136 IWL_TOF_INITIATOR_FLAGS_MACADDR_RANDOM = BIT(7), 1137 IWL_TOF_INITIATOR_FLAGS_SPECIFIC_CALIB = BIT(15), 1138 IWL_TOF_INITIATOR_FLAGS_COMMON_CALIB = BIT(16), 1139 IWL_TOF_INITIATOR_FLAGS_NON_ASAP_SUPPORT = BIT(20), 1140}; /* LOCATION_RANGE_REQ_CMD_API_S_VER_5 */ 1141 1142#define IWL_TOF_MAX_APS 5 1143#define IWL_MVM_TOF_MAX_TWO_SIDED_APS 5 1144 1145/** 1146 * struct iwl_tof_range_req_cmd_v5 - start measurement cmd 1147 * @initiator_flags: see flags @ iwl_tof_initiator_flags 1148 * @request_id: A Token incremented per request. The same Token will be 1149 * sent back in the range response 1150 * @initiator: 0- NW initiated, 1 - Client Initiated 1151 * @one_sided_los_disable: '0'- run ML-Algo for both ToF/OneSided, 1152 * '1' - run ML-Algo for ToF only 1153 * @req_timeout: Requested timeout of the response in units of 100ms. 1154 * This is equivalent to the session time configured to the 1155 * LMAC in Initiator Request 1156 * @report_policy: Supported partially for this release: For current release - 1157 * the range report will be uploaded as a batch when ready or 1158 * when the session is done (successfully / partially). 1159 * one of iwl_tof_response_mode. 1160 * @reserved0: reserved 1161 * @num_of_ap: Number of APs to measure (error if > IWL_TOF_MAX_APS) 1162 * @macaddr_random: '0' Use default source MAC address (i.e. p2_p), 1163 * '1' Use MAC Address randomization according to the below 1164 * @range_req_bssid: ranging request BSSID 1165 * @macaddr_template: MAC address template to use for non-randomized bits 1166 * @macaddr_mask: Bits set to 0 shall be copied from the MAC address template. 1167 * Bits set to 1 shall be randomized by the UMAC 1168 * @ftm_rx_chains: Rx chain to open to receive Responder's FTMs (XVT) 1169 * @ftm_tx_chains: Tx chain to send the ack to the Responder FTM (XVT) 1170 * @common_calib: The common calib value to inject to this measurement calc 1171 * @specific_calib: The specific calib value to inject to this measurement calc 1172 * @ap: per-AP request data 1173 */ 1174struct iwl_tof_range_req_cmd_v5 { 1175 __le32 initiator_flags; 1176 u8 request_id; 1177 u8 initiator; 1178 u8 one_sided_los_disable; 1179 u8 req_timeout; 1180 u8 report_policy; 1181 u8 reserved0; 1182 u8 num_of_ap; 1183 u8 macaddr_random; 1184 u8 range_req_bssid[ETH_ALEN]; 1185 u8 macaddr_template[ETH_ALEN]; 1186 u8 macaddr_mask[ETH_ALEN]; 1187 u8 ftm_rx_chains; 1188 u8 ftm_tx_chains; 1189 __le16 common_calib; 1190 __le16 specific_calib; 1191 struct iwl_tof_range_req_ap_entry_v2 ap[IWL_TOF_MAX_APS]; 1192} __packed; 1193/* LOCATION_RANGE_REQ_CMD_API_S_VER_5 */ 1194 1195/** 1196 * struct iwl_tof_range_req_cmd_v7 - start measurement cmd 1197 * @initiator_flags: see flags @ iwl_tof_initiator_flags 1198 * @request_id: A Token incremented per request. The same Token will be 1199 * sent back in the range response 1200 * @num_of_ap: Number of APs to measure (error if > IWL_TOF_MAX_APS) 1201 * @range_req_bssid: ranging request BSSID 1202 * @macaddr_mask: Bits set to 0 shall be copied from the MAC address template. 1203 * Bits set to 1 shall be randomized by the UMAC 1204 * @macaddr_template: MAC address template to use for non-randomized bits 1205 * @req_timeout_ms: Requested timeout of the response in units of milliseconds. 1206 * This is the session time for completing the measurement. 1207 * @tsf_mac_id: report the measurement start time for each ap in terms of the 1208 * TSF of this mac id. 0xff to disable TSF reporting. 1209 * @common_calib: The common calib value to inject to this measurement calc 1210 * @specific_calib: The specific calib value to inject to this measurement calc 1211 * @ap: per-AP request data, see &struct iwl_tof_range_req_ap_entry_v2. 1212 */ 1213struct iwl_tof_range_req_cmd_v7 { 1214 __le32 initiator_flags; 1215 u8 request_id; 1216 u8 num_of_ap; 1217 u8 range_req_bssid[ETH_ALEN]; 1218 u8 macaddr_mask[ETH_ALEN]; 1219 u8 macaddr_template[ETH_ALEN]; 1220 __le32 req_timeout_ms; 1221 __le32 tsf_mac_id; 1222 __le16 common_calib; 1223 __le16 specific_calib; 1224 struct iwl_tof_range_req_ap_entry_v3 ap[IWL_TOF_MAX_APS]; 1225} __packed; /* LOCATION_RANGE_REQ_CMD_API_S_VER_7 */ 1226 1227/** 1228 * struct iwl_tof_range_req_cmd_v8 - start measurement cmd 1229 * @initiator_flags: see flags @ iwl_tof_initiator_flags 1230 * @request_id: A Token incremented per request. The same Token will be 1231 * sent back in the range response 1232 * @num_of_ap: Number of APs to measure (error if > IWL_TOF_MAX_APS) 1233 * @range_req_bssid: ranging request BSSID 1234 * @macaddr_mask: Bits set to 0 shall be copied from the MAC address template. 1235 * Bits set to 1 shall be randomized by the UMAC 1236 * @macaddr_template: MAC address template to use for non-randomized bits 1237 * @req_timeout_ms: Requested timeout of the response in units of milliseconds. 1238 * This is the session time for completing the measurement. 1239 * @tsf_mac_id: report the measurement start time for each ap in terms of the 1240 * TSF of this mac id. 0xff to disable TSF reporting. 1241 * @common_calib: The common calib value to inject to this measurement calc 1242 * @specific_calib: The specific calib value to inject to this measurement calc 1243 * @ap: per-AP request data, see &struct iwl_tof_range_req_ap_entry_v2. 1244 */ 1245struct iwl_tof_range_req_cmd_v8 { 1246 __le32 initiator_flags; 1247 u8 request_id; 1248 u8 num_of_ap; 1249 u8 range_req_bssid[ETH_ALEN]; 1250 u8 macaddr_mask[ETH_ALEN]; 1251 u8 macaddr_template[ETH_ALEN]; 1252 __le32 req_timeout_ms; 1253 __le32 tsf_mac_id; 1254 __le16 common_calib; 1255 __le16 specific_calib; 1256 struct iwl_tof_range_req_ap_entry_v4 ap[IWL_TOF_MAX_APS]; 1257} __packed; /* LOCATION_RANGE_REQ_CMD_API_S_VER_8 */ 1258 1259/** 1260 * struct iwl_tof_range_req_cmd_v9 - start measurement cmd 1261 * @initiator_flags: see flags @ iwl_tof_initiator_flags 1262 * @request_id: A Token incremented per request. The same Token will be 1263 * sent back in the range response 1264 * @num_of_ap: Number of APs to measure (error if > IWL_TOF_MAX_APS) 1265 * @range_req_bssid: ranging request BSSID 1266 * @macaddr_mask: Bits set to 0 shall be copied from the MAC address template. 1267 * Bits set to 1 shall be randomized by the UMAC 1268 * @macaddr_template: MAC address template to use for non-randomized bits 1269 * @req_timeout_ms: Requested timeout of the response in units of milliseconds. 1270 * This is the session time for completing the measurement. 1271 * @tsf_mac_id: report the measurement start time for each ap in terms of the 1272 * TSF of this mac id. 0xff to disable TSF reporting. 1273 * @ap: per-AP request data, see &struct iwl_tof_range_req_ap_entry_v2. 1274 */ 1275struct iwl_tof_range_req_cmd_v9 { 1276 __le32 initiator_flags; 1277 u8 request_id; 1278 u8 num_of_ap; 1279 u8 range_req_bssid[ETH_ALEN]; 1280 u8 macaddr_mask[ETH_ALEN]; 1281 u8 macaddr_template[ETH_ALEN]; 1282 __le32 req_timeout_ms; 1283 __le32 tsf_mac_id; 1284 struct iwl_tof_range_req_ap_entry_v6 ap[IWL_TOF_MAX_APS]; 1285} __packed; /* LOCATION_RANGE_REQ_CMD_API_S_VER_9 */ 1286 1287/** 1288 * struct iwl_tof_range_req_cmd_v11 - start measurement cmd 1289 * @initiator_flags: see flags @ iwl_tof_initiator_flags 1290 * @request_id: A Token incremented per request. The same Token will be 1291 * sent back in the range response 1292 * @num_of_ap: Number of APs to measure (error if > IWL_TOF_MAX_APS) 1293 * @range_req_bssid: ranging request BSSID 1294 * @macaddr_mask: Bits set to 0 shall be copied from the MAC address template. 1295 * Bits set to 1 shall be randomized by the UMAC 1296 * @macaddr_template: MAC address template to use for non-randomized bits 1297 * @req_timeout_ms: Requested timeout of the response in units of milliseconds. 1298 * This is the session time for completing the measurement. 1299 * @tsf_mac_id: report the measurement start time for each ap in terms of the 1300 * TSF of this mac id. 0xff to disable TSF reporting. 1301 * @ap: per-AP request data, see &struct iwl_tof_range_req_ap_entry_v2. 1302 */ 1303struct iwl_tof_range_req_cmd_v11 { 1304 __le32 initiator_flags; 1305 u8 request_id; 1306 u8 num_of_ap; 1307 u8 range_req_bssid[ETH_ALEN]; 1308 u8 macaddr_mask[ETH_ALEN]; 1309 u8 macaddr_template[ETH_ALEN]; 1310 __le32 req_timeout_ms; 1311 __le32 tsf_mac_id; 1312 struct iwl_tof_range_req_ap_entry_v7 ap[IWL_TOF_MAX_APS]; 1313} __packed; /* LOCATION_RANGE_REQ_CMD_API_S_VER_11 */ 1314 1315/** 1316 * struct iwl_tof_range_req_cmd_v12 - start measurement cmd 1317 * @initiator_flags: see flags @ iwl_tof_initiator_flags 1318 * @request_id: A Token incremented per request. The same Token will be 1319 * sent back in the range response 1320 * @num_of_ap: Number of APs to measure (error if > IWL_TOF_MAX_APS) 1321 * @range_req_bssid: ranging request BSSID 1322 * @macaddr_mask: Bits set to 0 shall be copied from the MAC address template. 1323 * Bits set to 1 shall be randomized by the UMAC 1324 * @macaddr_template: MAC address template to use for non-randomized bits 1325 * @req_timeout_ms: Requested timeout of the response in units of milliseconds. 1326 * This is the session time for completing the measurement. 1327 * @tsf_mac_id: report the measurement start time for each ap in terms of the 1328 * TSF of this mac id. 0xff to disable TSF reporting. 1329 * @ap: per-AP request data, see &struct iwl_tof_range_req_ap_entry_v2. 1330 */ 1331struct iwl_tof_range_req_cmd_v12 { 1332 __le32 initiator_flags; 1333 u8 request_id; 1334 u8 num_of_ap; 1335 u8 range_req_bssid[ETH_ALEN]; 1336 u8 macaddr_mask[ETH_ALEN]; 1337 u8 macaddr_template[ETH_ALEN]; 1338 __le32 req_timeout_ms; 1339 __le32 tsf_mac_id; 1340 struct iwl_tof_range_req_ap_entry_v8 ap[IWL_TOF_MAX_APS]; 1341} __packed; /* LOCATION_RANGE_REQ_CMD_API_S_VER_12 */ 1342 1343/** 1344 * struct iwl_tof_range_req_cmd_v13 - start measurement cmd 1345 * @initiator_flags: see flags @ iwl_tof_initiator_flags 1346 * @request_id: A Token incremented per request. The same Token will be 1347 * sent back in the range response 1348 * @num_of_ap: Number of APs to measure (error if > IWL_TOF_MAX_APS) 1349 * @range_req_bssid: ranging request BSSID 1350 * @macaddr_mask: Bits set to 0 shall be copied from the MAC address template. 1351 * Bits set to 1 shall be randomized by the UMAC 1352 * @macaddr_template: MAC address template to use for non-randomized bits 1353 * @req_timeout_ms: Requested timeout of the response in units of milliseconds. 1354 * This is the session time for completing the measurement. 1355 * @tsf_mac_id: report the measurement start time for each ap in terms of the 1356 * TSF of this mac id. 0xff to disable TSF reporting. 1357 * @ap: per-AP request data, see &struct iwl_tof_range_req_ap_entry_v9. 1358 */ 1359struct iwl_tof_range_req_cmd_v13 { 1360 __le32 initiator_flags; 1361 u8 request_id; 1362 u8 num_of_ap; 1363 u8 range_req_bssid[ETH_ALEN]; 1364 u8 macaddr_mask[ETH_ALEN]; 1365 u8 macaddr_template[ETH_ALEN]; 1366 __le32 req_timeout_ms; 1367 __le32 tsf_mac_id; 1368 struct iwl_tof_range_req_ap_entry_v9 ap[IWL_TOF_MAX_APS]; 1369} __packed; /* LOCATION_RANGE_REQ_CMD_API_S_VER_13 */ 1370 1371/** 1372 * struct iwl_tof_range_req_cmd - start measurement cmd 1373 * @initiator_flags: see flags @ iwl_tof_initiator_flags 1374 * @request_id: A Token incremented per request. The same Token will be 1375 * sent back in the range response 1376 * @num_of_ap: Number of APs to measure (error if > IWL_TOF_MAX_APS) 1377 * @range_req_bssid: ranging request BSSID 1378 * @macaddr_mask: Bits set to 0 shall be copied from the MAC address template. 1379 * Bits set to 1 shall be randomized by the UMAC 1380 * @macaddr_template: MAC address template to use for non-randomized bits 1381 * @req_timeout_ms: Requested timeout of the response in units of milliseconds. 1382 * This is the session time for completing the measurement. 1383 * @tsf_mac_id: report the measurement start time for each ap in terms of the 1384 * TSF of this mac id. 0xff to disable TSF reporting. 1385 * @ap: per-AP request data, see &struct iwl_tof_range_req_ap_entry. 1386 */ 1387struct iwl_tof_range_req_cmd { 1388 __le32 initiator_flags; 1389 u8 request_id; 1390 u8 num_of_ap; 1391 u8 range_req_bssid[ETH_ALEN]; 1392 u8 macaddr_mask[ETH_ALEN]; 1393 u8 macaddr_template[ETH_ALEN]; 1394 __le32 req_timeout_ms; 1395 __le32 tsf_mac_id; 1396 struct iwl_tof_range_req_ap_entry ap[IWL_TOF_MAX_APS]; 1397} __packed; /* LOCATION_RANGE_REQ_CMD_API_S_VER_15 */ 1398 1399/* 1400 * enum iwl_tof_range_request_status - status of the sent request 1401 * @IWL_TOF_RANGE_REQUEST_STATUS_SUCCESSFUL - FW successfully received the 1402 * request 1403 * @IWL_TOF_RANGE_REQUEST_STATUS_BUSY - FW is busy with a previous request, the 1404 * sent request will not be handled 1405 */ 1406enum iwl_tof_range_request_status { 1407 IWL_TOF_RANGE_REQUEST_STATUS_SUCCESS, 1408 IWL_TOF_RANGE_REQUEST_STATUS_BUSY, 1409}; 1410 1411/** 1412 * enum iwl_tof_entry_status - TOF entry status 1413 * 1414 * @IWL_TOF_ENTRY_SUCCESS: successful measurement. 1415 * @IWL_TOF_ENTRY_GENERAL_FAILURE: General failure. 1416 * @IWL_TOF_ENTRY_NO_RESPONSE: Responder didn't reply to the request. 1417 * @IWL_TOF_ENTRY_REQUEST_REJECTED: Responder rejected the request. 1418 * @IWL_TOF_ENTRY_NOT_SCHEDULED: Time event was scheduled but not called yet. 1419 * @IWL_TOF_ENTRY_TIMING_MEASURE_TIMEOUT: Time event triggered but no 1420 * measurement was completed. 1421 * @IWL_TOF_ENTRY_TARGET_DIFF_CH_CANNOT_CHANGE: No range due inability to switch 1422 * from the primary channel. 1423 * @IWL_TOF_ENTRY_RANGE_NOT_SUPPORTED: Device doesn't support FTM. 1424 * @IWL_TOF_ENTRY_REQUEST_ABORT_UNKNOWN_REASON: Request aborted due to unknown 1425 * reason. 1426 * @IWL_TOF_ENTRY_LOCATION_INVALID_T1_T4_TIME_STAMP: Failure due to invalid 1427 * T1/T4. 1428 * @IWL_TOF_ENTRY_11MC_PROTOCOL_FAILURE: Failure due to invalid FTM frame 1429 * structure. 1430 * @IWL_TOF_ENTRY_REQUEST_CANNOT_SCHED: Request cannot be scheduled. 1431 * @IWL_TOF_ENTRY_RESPONDER_CANNOT_COLABORATE: Responder cannot serve the 1432 * initiator for some period, period supplied in @refusal_period. 1433 * @IWL_TOF_ENTRY_BAD_REQUEST_ARGS: Bad request arguments. 1434 * @IWL_TOF_ENTRY_WIFI_NOT_ENABLED: Wifi not enabled. 1435 * @IWL_TOF_ENTRY_RESPONDER_OVERRIDE_PARAMS: Responder override the original 1436 * parameters within the current session. 1437 */ 1438enum iwl_tof_entry_status { 1439 IWL_TOF_ENTRY_SUCCESS = 0, 1440 IWL_TOF_ENTRY_GENERAL_FAILURE = 1, 1441 IWL_TOF_ENTRY_NO_RESPONSE = 2, 1442 IWL_TOF_ENTRY_REQUEST_REJECTED = 3, 1443 IWL_TOF_ENTRY_NOT_SCHEDULED = 4, 1444 IWL_TOF_ENTRY_TIMING_MEASURE_TIMEOUT = 5, 1445 IWL_TOF_ENTRY_TARGET_DIFF_CH_CANNOT_CHANGE = 6, 1446 IWL_TOF_ENTRY_RANGE_NOT_SUPPORTED = 7, 1447 IWL_TOF_ENTRY_REQUEST_ABORT_UNKNOWN_REASON = 8, 1448 IWL_TOF_ENTRY_LOCATION_INVALID_T1_T4_TIME_STAMP = 9, 1449 IWL_TOF_ENTRY_11MC_PROTOCOL_FAILURE = 10, 1450 IWL_TOF_ENTRY_REQUEST_CANNOT_SCHED = 11, 1451 IWL_TOF_ENTRY_RESPONDER_CANNOT_COLABORATE = 12, 1452 IWL_TOF_ENTRY_BAD_REQUEST_ARGS = 13, 1453 IWL_TOF_ENTRY_WIFI_NOT_ENABLED = 14, 1454 IWL_TOF_ENTRY_RESPONDER_OVERRIDE_PARAMS = 15, 1455}; /* LOCATION_RANGE_RSP_AP_ENTRY_NTFY_API_S_VER_2 */ 1456 1457/** 1458 * struct iwl_tof_range_rsp_ap_entry_ntfy_v3 - AP parameters (response) 1459 * @bssid: BSSID of the AP 1460 * @measure_status: current APs measurement status, one of 1461 * &enum iwl_tof_entry_status. 1462 * @measure_bw: Current AP Bandwidth: 0 20MHz, 1 40MHz, 2 80MHz 1463 * @rtt: The Round Trip Time that took for the last measurement for 1464 * current AP [pSec] 1465 * @rtt_variance: The Variance of the RTT values measured for current AP 1466 * @rtt_spread: The Difference between the maximum and the minimum RTT 1467 * values measured for current AP in the current session [pSec] 1468 * @rssi: RSSI as uploaded in the Channel Estimation notification 1469 * @rssi_spread: The Difference between the maximum and the minimum RSSI values 1470 * measured for current AP in the current session 1471 * @reserved: reserved 1472 * @refusal_period: refusal period in case of 1473 * @IWL_TOF_ENTRY_RESPONDER_CANNOT_COLABORATE [sec] 1474 * @range: Measured range [cm] 1475 * @range_variance: Measured range variance [cm] 1476 * @timestamp: The GP2 Clock [usec] where Channel Estimation notification was 1477 * uploaded by the LMAC 1478 * @t2t3_initiator: as calculated from the algo in the initiator 1479 * @t1t4_responder: as calculated from the algo in the responder 1480 * @common_calib: Calib val that was used in for this AP measurement 1481 * @specific_calib: val that was used in for this AP measurement 1482 * @papd_calib_output: The result of the tof papd calibration that was injected 1483 * into the algorithm. 1484 */ 1485struct iwl_tof_range_rsp_ap_entry_ntfy_v3 { 1486 u8 bssid[ETH_ALEN]; 1487 u8 measure_status; 1488 u8 measure_bw; 1489 __le32 rtt; 1490 __le32 rtt_variance; 1491 __le32 rtt_spread; 1492 s8 rssi; 1493 u8 rssi_spread; 1494 u8 reserved; 1495 u8 refusal_period; 1496 __le32 range; 1497 __le32 range_variance; 1498 __le32 timestamp; 1499 __le32 t2t3_initiator; 1500 __le32 t1t4_responder; 1501 __le16 common_calib; 1502 __le16 specific_calib; 1503 __le32 papd_calib_output; 1504} __packed; /* LOCATION_RANGE_RSP_AP_ETRY_NTFY_API_S_VER_3 */ 1505 1506/** 1507 * struct iwl_tof_range_rsp_ap_entry_ntfy_v4 - AP parameters (response) 1508 * @bssid: BSSID of the AP 1509 * @measure_status: current APs measurement status, one of 1510 * &enum iwl_tof_entry_status. 1511 * @measure_bw: Current AP Bandwidth: 0 20MHz, 1 40MHz, 2 80MHz 1512 * @rtt: The Round Trip Time that took for the last measurement for 1513 * current AP [pSec] 1514 * @rtt_variance: The Variance of the RTT values measured for current AP 1515 * @rtt_spread: The Difference between the maximum and the minimum RTT 1516 * values measured for current AP in the current session [pSec] 1517 * @rssi: RSSI as uploaded in the Channel Estimation notification 1518 * @rssi_spread: The Difference between the maximum and the minimum RSSI values 1519 * measured for current AP in the current session 1520 * @last_burst: 1 if no more FTM sessions are scheduled for this responder 1521 * @refusal_period: refusal period in case of 1522 * @IWL_TOF_ENTRY_RESPONDER_CANNOT_COLABORATE [sec] 1523 * @timestamp: The GP2 Clock [usec] where Channel Estimation notification was 1524 * uploaded by the LMAC 1525 * @start_tsf: measurement start time in TSF of the mac specified in the range 1526 * request 1527 * @rx_rate_n_flags: rate and flags of the last FTM frame received from this 1528 * responder 1529 * @tx_rate_n_flags: rate and flags of the last ack sent to this responder 1530 * @t2t3_initiator: as calculated from the algo in the initiator 1531 * @t1t4_responder: as calculated from the algo in the responder 1532 * @common_calib: Calib val that was used in for this AP measurement 1533 * @specific_calib: val that was used in for this AP measurement 1534 * @papd_calib_output: The result of the tof papd calibration that was injected 1535 * into the algorithm. 1536 */ 1537struct iwl_tof_range_rsp_ap_entry_ntfy_v4 { 1538 u8 bssid[ETH_ALEN]; 1539 u8 measure_status; 1540 u8 measure_bw; 1541 __le32 rtt; 1542 __le32 rtt_variance; 1543 __le32 rtt_spread; 1544 s8 rssi; 1545 u8 rssi_spread; 1546 u8 last_burst; 1547 u8 refusal_period; 1548 __le32 timestamp; 1549 __le32 start_tsf; 1550 __le32 rx_rate_n_flags; 1551 __le32 tx_rate_n_flags; 1552 __le32 t2t3_initiator; 1553 __le32 t1t4_responder; 1554 __le16 common_calib; 1555 __le16 specific_calib; 1556 __le32 papd_calib_output; 1557} __packed; /* LOCATION_RANGE_RSP_AP_ETRY_NTFY_API_S_VER_4 */ 1558 1559/** 1560 * struct iwl_tof_range_rsp_ap_entry_ntfy_v5 - AP parameters (response) 1561 * @bssid: BSSID of the AP 1562 * @measure_status: current APs measurement status, one of 1563 * &enum iwl_tof_entry_status. 1564 * @measure_bw: Current AP Bandwidth: 0 20MHz, 1 40MHz, 2 80MHz 1565 * @rtt: The Round Trip Time that took for the last measurement for 1566 * current AP [pSec] 1567 * @rtt_variance: The Variance of the RTT values measured for current AP 1568 * @rtt_spread: The Difference between the maximum and the minimum RTT 1569 * values measured for current AP in the current session [pSec] 1570 * @rssi: RSSI as uploaded in the Channel Estimation notification 1571 * @rssi_spread: The Difference between the maximum and the minimum RSSI values 1572 * measured for current AP in the current session 1573 * @last_burst: 1 if no more FTM sessions are scheduled for this responder 1574 * @refusal_period: refusal period in case of 1575 * @IWL_TOF_ENTRY_RESPONDER_CANNOT_COLABORATE [sec] 1576 * @timestamp: The GP2 Clock [usec] where Channel Estimation notification was 1577 * uploaded by the LMAC 1578 * @start_tsf: measurement start time in TSF of the mac specified in the range 1579 * request 1580 * @rx_rate_n_flags: rate and flags of the last FTM frame received from this 1581 * responder 1582 * @tx_rate_n_flags: rate and flags of the last ack sent to this responder 1583 * @t2t3_initiator: as calculated from the algo in the initiator 1584 * @t1t4_responder: as calculated from the algo in the responder 1585 * @common_calib: Calib val that was used in for this AP measurement 1586 * @specific_calib: val that was used in for this AP measurement 1587 * @papd_calib_output: The result of the tof papd calibration that was injected 1588 * into the algorithm. 1589 * @rttConfidence: a value between 0 - 31 that represents the rtt accuracy. 1590 * @reserved: for alignment 1591 */ 1592struct iwl_tof_range_rsp_ap_entry_ntfy_v5 { 1593 u8 bssid[ETH_ALEN]; 1594 u8 measure_status; 1595 u8 measure_bw; 1596 __le32 rtt; 1597 __le32 rtt_variance; 1598 __le32 rtt_spread; 1599 s8 rssi; 1600 u8 rssi_spread; 1601 u8 last_burst; 1602 u8 refusal_period; 1603 __le32 timestamp; 1604 __le32 start_tsf; 1605 __le32 rx_rate_n_flags; 1606 __le32 tx_rate_n_flags; 1607 __le32 t2t3_initiator; 1608 __le32 t1t4_responder; 1609 __le16 common_calib; 1610 __le16 specific_calib; 1611 __le32 papd_calib_output; 1612 u8 rttConfidence; 1613 u8 reserved[3]; 1614} __packed; /* LOCATION_RANGE_RSP_AP_ETRY_NTFY_API_S_VER_5 */ 1615 1616/** 1617 * struct iwl_tof_range_rsp_ap_entry_ntfy_v7 - AP parameters (response) 1618 * @bssid: BSSID of the AP 1619 * @measure_status: current APs measurement status, one of 1620 * &enum iwl_tof_entry_status. 1621 * @measure_bw: Current AP Bandwidth: 0 20MHz, 1 40MHz, 2 80MHz 1622 * @rtt: The Round Trip Time that took for the last measurement for 1623 * current AP [pSec] 1624 * @rtt_variance: The Variance of the RTT values measured for current AP 1625 * @rtt_spread: The Difference between the maximum and the minimum RTT 1626 * values measured for current AP in the current session [pSec] 1627 * @rssi: RSSI as uploaded in the Channel Estimation notification 1628 * @rssi_spread: The Difference between the maximum and the minimum RSSI values 1629 * measured for current AP in the current session 1630 * @last_burst: 1 if no more FTM sessions are scheduled for this responder 1631 * @refusal_period: refusal period in case of 1632 * @IWL_TOF_ENTRY_RESPONDER_CANNOT_COLABORATE [sec] 1633 * @timestamp: The GP2 Clock [usec] where Channel Estimation notification was 1634 * uploaded by the LMAC 1635 * @start_tsf: measurement start time in TSF of the mac specified in the range 1636 * request 1637 * @rx_rate_n_flags: rate and flags of the last FTM frame received from this 1638 * responder 1639 * @tx_rate_n_flags: rate and flags of the last ack sent to this responder 1640 * @t2t3_initiator: as calculated from the algo in the initiator 1641 * @t1t4_responder: as calculated from the algo in the responder 1642 * @common_calib: Calib val that was used in for this AP measurement 1643 * @specific_calib: val that was used in for this AP measurement 1644 * @papd_calib_output: The result of the tof papd calibration that was injected 1645 * into the algorithm. 1646 * @rttConfidence: a value between 0 - 31 that represents the rtt accuracy. 1647 * @reserved: for alignment 1648 * @rx_pn: the last PN used for this responder Rx in case PMF is configured in 1649 * LE byte order. 1650 * @tx_pn: the last PN used for this responder Tx in case PMF is configured in 1651 * LE byte order. 1652 */ 1653struct iwl_tof_range_rsp_ap_entry_ntfy_v7 { 1654 u8 bssid[ETH_ALEN]; 1655 u8 measure_status; 1656 u8 measure_bw; 1657 __le32 rtt; 1658 __le32 rtt_variance; 1659 __le32 rtt_spread; 1660 s8 rssi; 1661 u8 rssi_spread; 1662 u8 last_burst; 1663 u8 refusal_period; 1664 __le32 timestamp; 1665 __le32 start_tsf; 1666 __le32 rx_rate_n_flags; 1667 __le32 tx_rate_n_flags; 1668 __le32 t2t3_initiator; 1669 __le32 t1t4_responder; 1670 __le16 common_calib; 1671 __le16 specific_calib; 1672 __le32 papd_calib_output; 1673 u8 rttConfidence; 1674 u8 reserved[3]; 1675 u8 rx_pn[IEEE80211_CCMP_PN_LEN]; 1676 u8 tx_pn[IEEE80211_CCMP_PN_LEN]; 1677} __packed; /* LOCATION_RANGE_RSP_AP_ETRY_NTFY_API_S_VER_6, 1678 LOCATION_RANGE_RSP_AP_ETRY_NTFY_API_S_VER_7 */ 1679 1680/** 1681 * struct iwl_tof_range_rsp_ap_entry_ntfy - AP parameters (response) 1682 * @bssid: BSSID of the AP 1683 * @measure_status: current APs measurement status, one of 1684 * &enum iwl_tof_entry_status. 1685 * @measure_bw: Current AP Bandwidth: 0 20MHz, 1 40MHz, 2 80MHz 1686 * @rtt: The Round Trip Time that took for the last measurement for 1687 * current AP [pSec] 1688 * @rtt_variance: The Variance of the RTT values measured for current AP 1689 * @rtt_spread: The Difference between the maximum and the minimum RTT 1690 * values measured for current AP in the current session [pSec] 1691 * @rssi: RSSI as uploaded in the Channel Estimation notification 1692 * @rssi_spread: The Difference between the maximum and the minimum RSSI values 1693 * measured for current AP in the current session 1694 * @last_burst: 1 if no more FTM sessions are scheduled for this responder 1695 * @refusal_period: refusal period in case of 1696 * @IWL_TOF_ENTRY_RESPONDER_CANNOT_COLABORATE [sec] 1697 * @timestamp: The GP2 Clock [usec] where Channel Estimation notification was 1698 * uploaded by the LMAC 1699 * @start_tsf: measurement start time in TSF of the mac specified in the range 1700 * request 1701 * @reserved1: reserved, for backwards compatibility 1702 * @t2t3_initiator: as calculated from the algo in the initiator 1703 * @t1t4_responder: as calculated from the algo in the responder 1704 * @common_calib: Calib val that was used in for this AP measurement 1705 * @specific_calib: val that was used in for this AP measurement 1706 * @papd_calib_output: The result of the tof papd calibration that was injected 1707 * into the algorithm. 1708 * @rttConfidence: a value between 0 - 31 that represents the rtt accuracy. 1709 * @reserved: for alignment 1710 * @rx_pn: the last PN used for this responder Rx in case PMF is configured in 1711 * LE byte order. 1712 * @tx_pn: the last PN used for this responder Tx in case PMF is configured in 1713 * LE byte order. 1714 */ 1715struct iwl_tof_range_rsp_ap_entry_ntfy { 1716 u8 bssid[ETH_ALEN]; 1717 u8 measure_status; 1718 u8 measure_bw; 1719 __le32 rtt; 1720 __le32 rtt_variance; 1721 __le32 rtt_spread; 1722 s8 rssi; 1723 u8 rssi_spread; 1724 u8 last_burst; 1725 u8 refusal_period; 1726 __le32 timestamp; 1727 __le32 start_tsf; 1728 __le32 reserved1[2]; 1729 __le32 t2t3_initiator; 1730 __le32 t1t4_responder; 1731 __le16 common_calib; 1732 __le16 specific_calib; 1733 __le32 papd_calib_output; 1734 u8 rttConfidence; 1735 u8 reserved[3]; 1736 u8 rx_pn[IEEE80211_CCMP_PN_LEN]; 1737 u8 tx_pn[IEEE80211_CCMP_PN_LEN]; 1738} __packed; /* LOCATION_RANGE_RSP_AP_ETRY_NTFY_API_S_VER_8 */ 1739 1740/** 1741 * enum iwl_tof_response_status - tof response status 1742 * 1743 * @IWL_TOF_RESPONSE_SUCCESS: successful range. 1744 * @IWL_TOF_RESPONSE_TIMEOUT: request aborted due to timeout expiration. 1745 * partial result of ranges done so far is included in the response. 1746 * @IWL_TOF_RESPONSE_ABORTED: Measurement aborted by command. 1747 * @IWL_TOF_RESPONSE_FAILED: Measurement request command failed. 1748 */ 1749enum iwl_tof_response_status { 1750 IWL_TOF_RESPONSE_SUCCESS = 0, 1751 IWL_TOF_RESPONSE_TIMEOUT = 1, 1752 IWL_TOF_RESPONSE_ABORTED = 4, 1753 IWL_TOF_RESPONSE_FAILED = 5, 1754}; /* LOCATION_RNG_RSP_STATUS */ 1755 1756/** 1757 * struct iwl_tof_range_rsp_ntfy_v5 - ranging response notification 1758 * @request_id: A Token ID of the corresponding Range request 1759 * @request_status: status of current measurement session, one of 1760 * &enum iwl_tof_response_status. 1761 * @last_in_batch: reprot policy (when not all responses are uploaded at once) 1762 * @num_of_aps: Number of APs to measure (error if > IWL_TOF_MAX_APS) 1763 * @ap: per-AP data 1764 */ 1765struct iwl_tof_range_rsp_ntfy_v5 { 1766 u8 request_id; 1767 u8 request_status; 1768 u8 last_in_batch; 1769 u8 num_of_aps; 1770 struct iwl_tof_range_rsp_ap_entry_ntfy_v3 ap[IWL_TOF_MAX_APS]; 1771} __packed; /* LOCATION_RANGE_RSP_NTFY_API_S_VER_5 */ 1772 1773/** 1774 * struct iwl_tof_range_rsp_ntfy_v6 - ranging response notification 1775 * @request_id: A Token ID of the corresponding Range request 1776 * @num_of_aps: Number of APs results 1777 * @last_report: 1 if no more FTM sessions are scheduled, 0 otherwise. 1778 * @reserved: reserved 1779 * @ap: per-AP data 1780 */ 1781struct iwl_tof_range_rsp_ntfy_v6 { 1782 u8 request_id; 1783 u8 num_of_aps; 1784 u8 last_report; 1785 u8 reserved; 1786 struct iwl_tof_range_rsp_ap_entry_ntfy_v4 ap[IWL_TOF_MAX_APS]; 1787} __packed; /* LOCATION_RANGE_RSP_NTFY_API_S_VER_6 */ 1788 1789/** 1790 * struct iwl_tof_range_rsp_ntfy_v7 - ranging response notification 1791 * @request_id: A Token ID of the corresponding Range request 1792 * @num_of_aps: Number of APs results 1793 * @last_report: 1 if no more FTM sessions are scheduled, 0 otherwise. 1794 * @reserved: reserved 1795 * @ap: per-AP data 1796 */ 1797struct iwl_tof_range_rsp_ntfy_v7 { 1798 u8 request_id; 1799 u8 num_of_aps; 1800 u8 last_report; 1801 u8 reserved; 1802 struct iwl_tof_range_rsp_ap_entry_ntfy_v5 ap[IWL_TOF_MAX_APS]; 1803} __packed; /* LOCATION_RANGE_RSP_NTFY_API_S_VER_7 */ 1804 1805/** 1806 * struct iwl_tof_range_rsp_ntfy_v9 - ranging response notification 1807 * @request_id: A Token ID of the corresponding Range request 1808 * @num_of_aps: Number of APs results 1809 * @last_report: 1 if no more FTM sessions are scheduled, 0 otherwise. 1810 * @reserved: reserved 1811 * @ap: per-AP data 1812 */ 1813struct iwl_tof_range_rsp_ntfy_v9 { 1814 u8 request_id; 1815 u8 num_of_aps; 1816 u8 last_report; 1817 u8 reserved; 1818 struct iwl_tof_range_rsp_ap_entry_ntfy_v7 ap[IWL_TOF_MAX_APS]; 1819} __packed; /* LOCATION_RANGE_RSP_NTFY_API_S_VER_8, 1820 * LOCATION_RANGE_RSP_NTFY_API_S_VER_9 1821 */ 1822 1823/** 1824 * struct iwl_tof_range_rsp_ntfy - ranging response notification 1825 * @request_id: A Token ID of the corresponding Range request 1826 * @num_of_aps: Number of APs results 1827 * @last_report: 1 if no more FTM sessions are scheduled, 0 otherwise. 1828 * @reserved: reserved 1829 * @ap: per-AP data 1830 */ 1831struct iwl_tof_range_rsp_ntfy { 1832 u8 request_id; 1833 u8 num_of_aps; 1834 u8 last_report; 1835 u8 reserved; 1836 struct iwl_tof_range_rsp_ap_entry_ntfy ap[IWL_TOF_MAX_APS]; 1837} __packed; /* LOCATION_RANGE_RSP_NTFY_API_S_VER_10 */ 1838 1839#define IWL_MVM_TOF_MCSI_BUF_SIZE (245) 1840/** 1841 * struct iwl_tof_mcsi_notif - used for debug 1842 * @token: token ID for the current session 1843 * @role: '0' - initiator, '1' - responder 1844 * @reserved: reserved 1845 * @initiator_bssid: initiator machine 1846 * @responder_bssid: responder machine 1847 * @mcsi_buffer: debug data 1848 */ 1849struct iwl_tof_mcsi_notif { 1850 u8 token; 1851 u8 role; 1852 __le16 reserved; 1853 u8 initiator_bssid[ETH_ALEN]; 1854 u8 responder_bssid[ETH_ALEN]; 1855 u8 mcsi_buffer[IWL_MVM_TOF_MCSI_BUF_SIZE * 4]; 1856} __packed; 1857 1858/** 1859 * struct iwl_tof_range_abort_cmd - TOF range abort command 1860 * @request_id: corresponds to a range request 1861 * @reserved: reserved 1862 */ 1863struct iwl_tof_range_abort_cmd { 1864 u8 request_id; 1865 u8 reserved[3]; 1866} __packed; 1867 1868enum ftm_responder_stats_flags { 1869 FTM_RESP_STAT_NON_ASAP_STARTED = BIT(0), 1870 FTM_RESP_STAT_NON_ASAP_IN_WIN = BIT(1), 1871 FTM_RESP_STAT_NON_ASAP_OUT_WIN = BIT(2), 1872 FTM_RESP_STAT_TRIGGER_DUP = BIT(3), 1873 FTM_RESP_STAT_DUP = BIT(4), 1874 FTM_RESP_STAT_DUP_IN_WIN = BIT(5), 1875 FTM_RESP_STAT_DUP_OUT_WIN = BIT(6), 1876 FTM_RESP_STAT_SCHED_SUCCESS = BIT(7), 1877 FTM_RESP_STAT_ASAP_REQ = BIT(8), 1878 FTM_RESP_STAT_NON_ASAP_REQ = BIT(9), 1879 FTM_RESP_STAT_ASAP_RESP = BIT(10), 1880 FTM_RESP_STAT_NON_ASAP_RESP = BIT(11), 1881 FTM_RESP_STAT_FAIL_INITIATOR_INACTIVE = BIT(12), 1882 FTM_RESP_STAT_FAIL_INITIATOR_OUT_WIN = BIT(13), 1883 FTM_RESP_STAT_FAIL_INITIATOR_RETRY_LIM = BIT(14), 1884 FTM_RESP_STAT_FAIL_NEXT_SERVED = BIT(15), 1885 FTM_RESP_STAT_FAIL_TRIGGER_ERR = BIT(16), 1886 FTM_RESP_STAT_FAIL_GC = BIT(17), 1887 FTM_RESP_STAT_SUCCESS = BIT(18), 1888 FTM_RESP_STAT_INTEL_IE = BIT(19), 1889 FTM_RESP_STAT_INITIATOR_ACTIVE = BIT(20), 1890 FTM_RESP_STAT_MEASUREMENTS_AVAILABLE = BIT(21), 1891 FTM_RESP_STAT_TRIGGER_UNKNOWN = BIT(22), 1892 FTM_RESP_STAT_PROCESS_FAIL = BIT(23), 1893 FTM_RESP_STAT_ACK = BIT(24), 1894 FTM_RESP_STAT_NACK = BIT(25), 1895 FTM_RESP_STAT_INVALID_INITIATOR_ID = BIT(26), 1896 FTM_RESP_STAT_TIMER_MIN_DELTA = BIT(27), 1897 FTM_RESP_STAT_INITIATOR_REMOVED = BIT(28), 1898 FTM_RESP_STAT_INITIATOR_ADDED = BIT(29), 1899 FTM_RESP_STAT_ERR_LIST_FULL = BIT(30), 1900 FTM_RESP_STAT_INITIATOR_SCHED_NOW = BIT(31), 1901}; /* RESP_IND_E */ 1902 1903/** 1904 * struct iwl_ftm_responder_stats - FTM responder statistics 1905 * @addr: initiator address 1906 * @success_ftm: number of successful ftm frames 1907 * @ftm_per_burst: num of FTM frames that were received 1908 * @flags: &enum ftm_responder_stats_flags 1909 * @duration: actual duration of FTM 1910 * @allocated_duration: time that was allocated for this FTM session 1911 * @bw: FTM request bandwidth 1912 * @rate: FTM request rate 1913 * @reserved: for alingment and future use 1914 */ 1915struct iwl_ftm_responder_stats { 1916 u8 addr[ETH_ALEN]; 1917 u8 success_ftm; 1918 u8 ftm_per_burst; 1919 __le32 flags; 1920 __le32 duration; 1921 __le32 allocated_duration; 1922 u8 bw; 1923 u8 rate; 1924 __le16 reserved; 1925} __packed; /* TOF_RESPONDER_STATISTICS_NTFY_S_VER_2 */ 1926 1927#define IWL_CSI_MAX_EXPECTED_CHUNKS 16 1928 1929#define IWL_CSI_CHUNK_CTL_NUM_MASK_VER_1 0x0003 1930#define IWL_CSI_CHUNK_CTL_IDX_MASK_VER_1 0x000c 1931 1932#define IWL_CSI_CHUNK_CTL_NUM_MASK_VER_2 0x00ff 1933#define IWL_CSI_CHUNK_CTL_IDX_MASK_VER_2 0xff00 1934 1935struct iwl_csi_chunk_notification { 1936 __le32 token; 1937 __le16 seq; 1938 __le16 ctl; 1939 __le32 size; 1940 u8 data[]; 1941} __packed; /* CSI_CHUNKS_HDR_NTFY_API_S_VER_1/VER_2 */ 1942 1943#endif /* __iwl_fw_api_location_h__ */
~/
Read-only file preview.