FILE
devices.c
File preview with syntax highlighting.
linux-6.19.14/drivers/net/wireless/intel/iwlwifi/dvm/devices.c
1// SPDX-License-Identifier: GPL-2.0-only 2/****************************************************************************** 3 * 4 * Copyright(c) 2008 - 2014 Intel Corporation. All rights reserved. 5 * Copyright (C) 2019, 2025 Intel Corporation 6 *****************************************************************************/ 7 8#include <linux/units.h> 9 10/* 11 * DVM device-specific data & functions 12 */ 13#include "iwl-io.h" 14#include "iwl-prph.h" 15#include "iwl-nvm-utils.h" 16 17#include "agn.h" 18#include "dev.h" 19#include "commands.h" 20 21 22/* 23 * 1000 series 24 * =========== 25 */ 26 27/* 28 * For 1000, use advance thermal throttling critical temperature threshold, 29 * but legacy thermal management implementation for now. 30 * This is for the reason of 1000 uCode using advance thermal throttling API 31 * but not implement ct_kill_exit based on ct_kill exit temperature 32 * so the thermal throttling will still based on legacy thermal throttling 33 * management. 34 * The code here need to be modified once 1000 uCode has the advanced thermal 35 * throttling algorithm in place 36 */ 37static void iwl1000_set_ct_threshold(struct iwl_priv *priv) 38{ 39 /* want Celsius */ 40 priv->hw_params.ct_kill_threshold = CT_KILL_THRESHOLD_LEGACY; 41 priv->hw_params.ct_kill_exit_threshold = CT_KILL_EXIT_THRESHOLD; 42} 43 44/* NIC configuration for 1000 series */ 45static void iwl1000_nic_config(struct iwl_priv *priv) 46{ 47 /* Setting digital SVR for 1000 card to 1.32V */ 48 /* locking is acquired in iwl_set_bits_mask_prph() function */ 49 iwl_set_bits_mask_prph(priv->trans, APMG_DIGITAL_SVR_REG, 50 APMG_SVR_DIGITAL_VOLTAGE_1_32, 51 ~APMG_SVR_VOLTAGE_CONFIG_BIT_MSK); 52} 53 54/** 55 * iwl_beacon_time_mask_low - mask of lower 32 bit of beacon time 56 * @priv: pointer to iwl_priv data structure 57 * @tsf_bits: number of bits need to shift for masking) 58 * Return: low 32 bits of beacon time mask 59 */ 60static inline u32 iwl_beacon_time_mask_low(struct iwl_priv *priv, 61 u16 tsf_bits) 62{ 63 return (1 << tsf_bits) - 1; 64} 65 66/** 67 * iwl_beacon_time_mask_high - mask of higher 32 bit of beacon time 68 * @priv: pointer to iwl_priv data structure 69 * @tsf_bits: number of bits need to shift for masking) 70 * Return: high 32 bits of beacon time mask 71 */ 72static inline u32 iwl_beacon_time_mask_high(struct iwl_priv *priv, 73 u16 tsf_bits) 74{ 75 return ((1 << (32 - tsf_bits)) - 1) << tsf_bits; 76} 77 78/* 79 * extended beacon time format 80 * time in usec will be changed into a 32-bit value in extended:internal format 81 * the extended part is the beacon counts 82 * the internal part is the time in usec within one beacon interval 83 */ 84static u32 iwl_usecs_to_beacons(struct iwl_priv *priv, u32 usec, 85 u32 beacon_interval) 86{ 87 u32 quot; 88 u32 rem; 89 u32 interval = beacon_interval * TIME_UNIT; 90 91 if (!interval || !usec) 92 return 0; 93 94 quot = (usec / interval) & 95 (iwl_beacon_time_mask_high(priv, IWLAGN_EXT_BEACON_TIME_POS) >> 96 IWLAGN_EXT_BEACON_TIME_POS); 97 rem = (usec % interval) & iwl_beacon_time_mask_low(priv, 98 IWLAGN_EXT_BEACON_TIME_POS); 99 100 return (quot << IWLAGN_EXT_BEACON_TIME_POS) + rem; 101} 102 103/* base is usually what we get from ucode with each received frame, 104 * the same as HW timer counter counting down 105 */ 106static __le32 iwl_add_beacon_time(struct iwl_priv *priv, u32 base, 107 u32 addon, u32 beacon_interval) 108{ 109 u32 base_low = base & iwl_beacon_time_mask_low(priv, 110 IWLAGN_EXT_BEACON_TIME_POS); 111 u32 addon_low = addon & iwl_beacon_time_mask_low(priv, 112 IWLAGN_EXT_BEACON_TIME_POS); 113 u32 interval = beacon_interval * TIME_UNIT; 114 u32 res = (base & iwl_beacon_time_mask_high(priv, 115 IWLAGN_EXT_BEACON_TIME_POS)) + 116 (addon & iwl_beacon_time_mask_high(priv, 117 IWLAGN_EXT_BEACON_TIME_POS)); 118 119 if (base_low > addon_low) 120 res += base_low - addon_low; 121 else if (base_low < addon_low) { 122 res += interval + base_low - addon_low; 123 res += (1 << IWLAGN_EXT_BEACON_TIME_POS); 124 } else 125 res += (1 << IWLAGN_EXT_BEACON_TIME_POS); 126 127 return cpu_to_le32(res); 128} 129 130static const struct iwl_sensitivity_ranges iwl1000_sensitivity = { 131 .min_nrg_cck = 95, 132 .auto_corr_min_ofdm = 90, 133 .auto_corr_min_ofdm_mrc = 170, 134 .auto_corr_min_ofdm_x1 = 120, 135 .auto_corr_min_ofdm_mrc_x1 = 240, 136 137 .auto_corr_max_ofdm = 120, 138 .auto_corr_max_ofdm_mrc = 210, 139 .auto_corr_max_ofdm_x1 = 155, 140 .auto_corr_max_ofdm_mrc_x1 = 290, 141 142 .auto_corr_min_cck = 125, 143 .auto_corr_max_cck = 200, 144 .auto_corr_min_cck_mrc = 170, 145 .auto_corr_max_cck_mrc = 400, 146 .nrg_th_cck = 95, 147 .nrg_th_ofdm = 95, 148 149 .barker_corr_th_min = 190, 150 .barker_corr_th_min_mrc = 390, 151 .nrg_th_cca = 62, 152}; 153 154static void iwl1000_hw_set_hw_params(struct iwl_priv *priv) 155{ 156 iwl1000_set_ct_threshold(priv); 157 158 /* Set initial sensitivity parameters */ 159 priv->hw_params.sens = &iwl1000_sensitivity; 160} 161 162const struct iwl_dvm_cfg iwl_dvm_1000_cfg = { 163 .set_hw_params = iwl1000_hw_set_hw_params, 164 .nic_config = iwl1000_nic_config, 165 .temperature = iwlagn_temperature, 166 .support_ct_kill_exit = true, 167 .plcp_delta_threshold = IWL_MAX_PLCP_ERR_EXT_LONG_THRESHOLD_DEF, 168 .chain_noise_scale = 1000, 169}; 170 171 172/* 173 * 2000 series 174 * =========== 175 */ 176 177static void iwl2000_set_ct_threshold(struct iwl_priv *priv) 178{ 179 /* want Celsius */ 180 priv->hw_params.ct_kill_threshold = CT_KILL_THRESHOLD; 181 priv->hw_params.ct_kill_exit_threshold = CT_KILL_EXIT_THRESHOLD; 182} 183 184/* NIC configuration for 2000 series */ 185static void iwl2000_nic_config(struct iwl_priv *priv) 186{ 187 iwl_set_bit(priv->trans, CSR_GP_DRIVER_REG, 188 CSR_GP_DRIVER_REG_BIT_RADIO_IQ_INVER); 189} 190 191static const struct iwl_sensitivity_ranges iwl2000_sensitivity = { 192 .min_nrg_cck = 97, 193 .auto_corr_min_ofdm = 80, 194 .auto_corr_min_ofdm_mrc = 128, 195 .auto_corr_min_ofdm_x1 = 105, 196 .auto_corr_min_ofdm_mrc_x1 = 192, 197 198 .auto_corr_max_ofdm = 145, 199 .auto_corr_max_ofdm_mrc = 232, 200 .auto_corr_max_ofdm_x1 = 110, 201 .auto_corr_max_ofdm_mrc_x1 = 232, 202 203 .auto_corr_min_cck = 125, 204 .auto_corr_max_cck = 175, 205 .auto_corr_min_cck_mrc = 160, 206 .auto_corr_max_cck_mrc = 310, 207 .nrg_th_cck = 97, 208 .nrg_th_ofdm = 100, 209 210 .barker_corr_th_min = 190, 211 .barker_corr_th_min_mrc = 390, 212 .nrg_th_cca = 62, 213}; 214 215static void iwl2000_hw_set_hw_params(struct iwl_priv *priv) 216{ 217 iwl2000_set_ct_threshold(priv); 218 219 /* Set initial sensitivity parameters */ 220 priv->hw_params.sens = &iwl2000_sensitivity; 221} 222 223const struct iwl_dvm_cfg iwl_dvm_2000_cfg = { 224 .set_hw_params = iwl2000_hw_set_hw_params, 225 .nic_config = iwl2000_nic_config, 226 .temperature = iwlagn_temperature, 227 .adv_thermal_throttle = true, 228 .support_ct_kill_exit = true, 229 .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF, 230 .chain_noise_scale = 1000, 231 .hd_v2 = true, 232 .need_temp_offset_calib = true, 233 .temp_offset_v2 = true, 234}; 235 236const struct iwl_dvm_cfg iwl_dvm_105_cfg = { 237 .set_hw_params = iwl2000_hw_set_hw_params, 238 .nic_config = iwl2000_nic_config, 239 .temperature = iwlagn_temperature, 240 .adv_thermal_throttle = true, 241 .support_ct_kill_exit = true, 242 .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF, 243 .chain_noise_scale = 1000, 244 .hd_v2 = true, 245 .need_temp_offset_calib = true, 246 .temp_offset_v2 = true, 247 .adv_pm = true, 248}; 249 250static const struct iwl_dvm_bt_params iwl2030_bt_params = { 251 /* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */ 252 .advanced_bt_coexist = true, 253 .agg_time_limit = BT_AGG_THRESHOLD_DEF, 254 .bt_init_traffic_load = IWL_BT_COEX_TRAFFIC_LOAD_NONE, 255 .bt_prio_boost = IWLAGN_BT_PRIO_BOOST_DEFAULT32, 256 .bt_sco_disable = true, 257 .bt_session_2 = true, 258}; 259 260const struct iwl_dvm_cfg iwl_dvm_2030_cfg = { 261 .set_hw_params = iwl2000_hw_set_hw_params, 262 .nic_config = iwl2000_nic_config, 263 .temperature = iwlagn_temperature, 264 .adv_thermal_throttle = true, 265 .support_ct_kill_exit = true, 266 .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF, 267 .chain_noise_scale = 1000, 268 .hd_v2 = true, 269 .bt_params = &iwl2030_bt_params, 270 .need_temp_offset_calib = true, 271 .temp_offset_v2 = true, 272 .adv_pm = true, 273}; 274 275/* 276 * 5000 series 277 * =========== 278 */ 279 280/* NIC configuration for 5000 series */ 281static const struct iwl_sensitivity_ranges iwl5000_sensitivity = { 282 .min_nrg_cck = 100, 283 .auto_corr_min_ofdm = 90, 284 .auto_corr_min_ofdm_mrc = 170, 285 .auto_corr_min_ofdm_x1 = 105, 286 .auto_corr_min_ofdm_mrc_x1 = 220, 287 288 .auto_corr_max_ofdm = 120, 289 .auto_corr_max_ofdm_mrc = 210, 290 .auto_corr_max_ofdm_x1 = 120, 291 .auto_corr_max_ofdm_mrc_x1 = 240, 292 293 .auto_corr_min_cck = 125, 294 .auto_corr_max_cck = 200, 295 .auto_corr_min_cck_mrc = 200, 296 .auto_corr_max_cck_mrc = 400, 297 .nrg_th_cck = 100, 298 .nrg_th_ofdm = 100, 299 300 .barker_corr_th_min = 190, 301 .barker_corr_th_min_mrc = 390, 302 .nrg_th_cca = 62, 303}; 304 305static const struct iwl_sensitivity_ranges iwl5150_sensitivity = { 306 .min_nrg_cck = 95, 307 .auto_corr_min_ofdm = 90, 308 .auto_corr_min_ofdm_mrc = 170, 309 .auto_corr_min_ofdm_x1 = 105, 310 .auto_corr_min_ofdm_mrc_x1 = 220, 311 312 .auto_corr_max_ofdm = 120, 313 .auto_corr_max_ofdm_mrc = 210, 314 /* max = min for performance bug in 5150 DSP */ 315 .auto_corr_max_ofdm_x1 = 105, 316 .auto_corr_max_ofdm_mrc_x1 = 220, 317 318 .auto_corr_min_cck = 125, 319 .auto_corr_max_cck = 200, 320 .auto_corr_min_cck_mrc = 170, 321 .auto_corr_max_cck_mrc = 400, 322 .nrg_th_cck = 95, 323 .nrg_th_ofdm = 95, 324 325 .barker_corr_th_min = 190, 326 .barker_corr_th_min_mrc = 390, 327 .nrg_th_cca = 62, 328}; 329 330#define IWL_5150_VOLTAGE_TO_TEMPERATURE_COEFF (-5) 331 332static s32 iwl_temp_calib_to_offset(struct iwl_priv *priv) 333{ 334 u16 temperature, voltage; 335 336 temperature = le16_to_cpu(priv->nvm_data->kelvin_temperature); 337 voltage = le16_to_cpu(priv->nvm_data->kelvin_voltage); 338 339 /* offset = temp - volt / coeff */ 340 return (s32)(temperature - 341 voltage / IWL_5150_VOLTAGE_TO_TEMPERATURE_COEFF); 342} 343 344static void iwl5150_set_ct_threshold(struct iwl_priv *priv) 345{ 346 const s32 volt2temp_coef = IWL_5150_VOLTAGE_TO_TEMPERATURE_COEFF; 347 s32 threshold = (s32)celsius_to_kelvin(CT_KILL_THRESHOLD_LEGACY) - 348 iwl_temp_calib_to_offset(priv); 349 350 priv->hw_params.ct_kill_threshold = threshold * volt2temp_coef; 351} 352 353static void iwl5000_set_ct_threshold(struct iwl_priv *priv) 354{ 355 /* want Celsius */ 356 priv->hw_params.ct_kill_threshold = CT_KILL_THRESHOLD_LEGACY; 357} 358 359static void iwl5000_hw_set_hw_params(struct iwl_priv *priv) 360{ 361 iwl5000_set_ct_threshold(priv); 362 363 /* Set initial sensitivity parameters */ 364 priv->hw_params.sens = &iwl5000_sensitivity; 365} 366 367static void iwl5150_hw_set_hw_params(struct iwl_priv *priv) 368{ 369 iwl5150_set_ct_threshold(priv); 370 371 /* Set initial sensitivity parameters */ 372 priv->hw_params.sens = &iwl5150_sensitivity; 373} 374 375static void iwl5150_temperature(struct iwl_priv *priv) 376{ 377 u32 vt = 0; 378 s32 offset = iwl_temp_calib_to_offset(priv); 379 380 vt = le32_to_cpu(priv->statistics.common.temperature); 381 vt = vt / IWL_5150_VOLTAGE_TO_TEMPERATURE_COEFF + offset; 382 /* now vt hold the temperature in Kelvin */ 383 priv->temperature = kelvin_to_celsius(vt); 384 iwl_tt_handler(priv); 385} 386 387static int iwl5000_hw_channel_switch(struct iwl_priv *priv, 388 struct ieee80211_channel_switch *ch_switch) 389{ 390 /* 391 * MULTI-FIXME 392 * See iwlagn_mac_channel_switch. 393 */ 394 struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS]; 395 struct iwl5000_channel_switch_cmd cmd; 396 u32 switch_time_in_usec, ucode_switch_time; 397 u16 ch; 398 u32 tsf_low; 399 u8 switch_count; 400 u16 beacon_interval = le16_to_cpu(ctx->timing.beacon_interval); 401 struct ieee80211_vif *vif = ctx->vif; 402 struct iwl_host_cmd hcmd = { 403 .id = REPLY_CHANNEL_SWITCH, 404 .len = { sizeof(cmd), }, 405 .data = { &cmd, }, 406 }; 407 408 cmd.band = priv->band == NL80211_BAND_2GHZ; 409 ch = ch_switch->chandef.chan->hw_value; 410 IWL_DEBUG_11H(priv, "channel switch from %d to %d\n", 411 ctx->active.channel, ch); 412 cmd.channel = cpu_to_le16(ch); 413 cmd.rxon_flags = ctx->staging.flags; 414 cmd.rxon_filter_flags = ctx->staging.filter_flags; 415 switch_count = ch_switch->count; 416 tsf_low = ch_switch->timestamp & 0x0ffffffff; 417 /* 418 * calculate the ucode channel switch time 419 * adding TSF as one of the factor for when to switch 420 */ 421 if ((priv->ucode_beacon_time > tsf_low) && beacon_interval) { 422 if (switch_count > ((priv->ucode_beacon_time - tsf_low) / 423 beacon_interval)) { 424 switch_count -= (priv->ucode_beacon_time - 425 tsf_low) / beacon_interval; 426 } else 427 switch_count = 0; 428 } 429 if (switch_count <= 1) 430 cmd.switch_time = cpu_to_le32(priv->ucode_beacon_time); 431 else { 432 switch_time_in_usec = 433 vif->bss_conf.beacon_int * switch_count * TIME_UNIT; 434 ucode_switch_time = iwl_usecs_to_beacons(priv, 435 switch_time_in_usec, 436 beacon_interval); 437 cmd.switch_time = iwl_add_beacon_time(priv, 438 priv->ucode_beacon_time, 439 ucode_switch_time, 440 beacon_interval); 441 } 442 IWL_DEBUG_11H(priv, "uCode time for the switch is 0x%x\n", 443 cmd.switch_time); 444 cmd.expect_beacon = 445 ch_switch->chandef.chan->flags & IEEE80211_CHAN_RADAR; 446 447 return iwl_dvm_send_cmd(priv, &hcmd); 448} 449 450const struct iwl_dvm_cfg iwl_dvm_5000_cfg = { 451 .set_hw_params = iwl5000_hw_set_hw_params, 452 .set_channel_switch = iwl5000_hw_channel_switch, 453 .temperature = iwlagn_temperature, 454 .plcp_delta_threshold = IWL_MAX_PLCP_ERR_LONG_THRESHOLD_DEF, 455 .chain_noise_scale = 1000, 456 .no_idle_support = true, 457}; 458 459const struct iwl_dvm_cfg iwl_dvm_5150_cfg = { 460 .set_hw_params = iwl5150_hw_set_hw_params, 461 .set_channel_switch = iwl5000_hw_channel_switch, 462 .temperature = iwl5150_temperature, 463 .plcp_delta_threshold = IWL_MAX_PLCP_ERR_LONG_THRESHOLD_DEF, 464 .chain_noise_scale = 1000, 465 .no_idle_support = true, 466 .no_xtal_calib = true, 467}; 468 469 470 471/* 472 * 6000 series 473 * =========== 474 */ 475 476static void iwl6000_set_ct_threshold(struct iwl_priv *priv) 477{ 478 /* want Celsius */ 479 priv->hw_params.ct_kill_threshold = CT_KILL_THRESHOLD; 480 priv->hw_params.ct_kill_exit_threshold = CT_KILL_EXIT_THRESHOLD; 481} 482 483/* NIC configuration for 6000 series */ 484static void iwl6000_nic_config(struct iwl_priv *priv) 485{ 486 switch (priv->trans->mac_cfg->device_family) { 487 case IWL_DEVICE_FAMILY_6005: 488 case IWL_DEVICE_FAMILY_6030: 489 case IWL_DEVICE_FAMILY_6000: 490 break; 491 case IWL_DEVICE_FAMILY_6000i: 492 /* 2x2 IPA phy type */ 493 iwl_write32(priv->trans, CSR_GP_DRIVER_REG, 494 CSR_GP_DRIVER_REG_BIT_RADIO_SKU_2x2_IPA); 495 break; 496 case IWL_DEVICE_FAMILY_6050: 497 /* Indicate calibration version to uCode. */ 498 if (priv->nvm_data->calib_version >= 6) 499 iwl_set_bit(priv->trans, CSR_GP_DRIVER_REG, 500 CSR_GP_DRIVER_REG_BIT_CALIB_VERSION6); 501 break; 502 case IWL_DEVICE_FAMILY_6150: 503 /* Indicate calibration version to uCode. */ 504 if (priv->nvm_data->calib_version >= 6) 505 iwl_set_bit(priv->trans, CSR_GP_DRIVER_REG, 506 CSR_GP_DRIVER_REG_BIT_CALIB_VERSION6); 507 iwl_set_bit(priv->trans, CSR_GP_DRIVER_REG, 508 CSR_GP_DRIVER_REG_BIT_6050_1x2); 509 break; 510 default: 511 WARN_ON(1); 512 } 513} 514 515static const struct iwl_sensitivity_ranges iwl6000_sensitivity = { 516 .min_nrg_cck = 110, 517 .auto_corr_min_ofdm = 80, 518 .auto_corr_min_ofdm_mrc = 128, 519 .auto_corr_min_ofdm_x1 = 105, 520 .auto_corr_min_ofdm_mrc_x1 = 192, 521 522 .auto_corr_max_ofdm = 145, 523 .auto_corr_max_ofdm_mrc = 232, 524 .auto_corr_max_ofdm_x1 = 110, 525 .auto_corr_max_ofdm_mrc_x1 = 232, 526 527 .auto_corr_min_cck = 125, 528 .auto_corr_max_cck = 175, 529 .auto_corr_min_cck_mrc = 160, 530 .auto_corr_max_cck_mrc = 310, 531 .nrg_th_cck = 110, 532 .nrg_th_ofdm = 110, 533 534 .barker_corr_th_min = 190, 535 .barker_corr_th_min_mrc = 336, 536 .nrg_th_cca = 62, 537}; 538 539static void iwl6000_hw_set_hw_params(struct iwl_priv *priv) 540{ 541 iwl6000_set_ct_threshold(priv); 542 543 /* Set initial sensitivity parameters */ 544 priv->hw_params.sens = &iwl6000_sensitivity; 545 546} 547 548static int iwl6000_hw_channel_switch(struct iwl_priv *priv, 549 struct ieee80211_channel_switch *ch_switch) 550{ 551 /* 552 * MULTI-FIXME 553 * See iwlagn_mac_channel_switch. 554 */ 555 struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS]; 556 struct iwl6000_channel_switch_cmd *cmd; 557 u32 switch_time_in_usec, ucode_switch_time; 558 u16 ch; 559 u32 tsf_low; 560 u8 switch_count; 561 u16 beacon_interval = le16_to_cpu(ctx->timing.beacon_interval); 562 struct ieee80211_vif *vif = ctx->vif; 563 struct iwl_host_cmd hcmd = { 564 .id = REPLY_CHANNEL_SWITCH, 565 .len = { sizeof(*cmd), }, 566 .dataflags[0] = IWL_HCMD_DFL_NOCOPY, 567 }; 568 int err; 569 570 cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); 571 if (!cmd) 572 return -ENOMEM; 573 574 hcmd.data[0] = cmd; 575 576 cmd->band = priv->band == NL80211_BAND_2GHZ; 577 ch = ch_switch->chandef.chan->hw_value; 578 IWL_DEBUG_11H(priv, "channel switch from %u to %u\n", 579 ctx->active.channel, ch); 580 cmd->channel = cpu_to_le16(ch); 581 cmd->rxon_flags = ctx->staging.flags; 582 cmd->rxon_filter_flags = ctx->staging.filter_flags; 583 switch_count = ch_switch->count; 584 tsf_low = ch_switch->timestamp & 0x0ffffffff; 585 /* 586 * calculate the ucode channel switch time 587 * adding TSF as one of the factor for when to switch 588 */ 589 if ((priv->ucode_beacon_time > tsf_low) && beacon_interval) { 590 if (switch_count > ((priv->ucode_beacon_time - tsf_low) / 591 beacon_interval)) { 592 switch_count -= (priv->ucode_beacon_time - 593 tsf_low) / beacon_interval; 594 } else 595 switch_count = 0; 596 } 597 if (switch_count <= 1) 598 cmd->switch_time = cpu_to_le32(priv->ucode_beacon_time); 599 else { 600 switch_time_in_usec = 601 vif->bss_conf.beacon_int * switch_count * TIME_UNIT; 602 ucode_switch_time = iwl_usecs_to_beacons(priv, 603 switch_time_in_usec, 604 beacon_interval); 605 cmd->switch_time = iwl_add_beacon_time(priv, 606 priv->ucode_beacon_time, 607 ucode_switch_time, 608 beacon_interval); 609 } 610 IWL_DEBUG_11H(priv, "uCode time for the switch is 0x%x\n", 611 cmd->switch_time); 612 cmd->expect_beacon = 613 ch_switch->chandef.chan->flags & IEEE80211_CHAN_RADAR; 614 615 err = iwl_dvm_send_cmd(priv, &hcmd); 616 kfree(cmd); 617 return err; 618} 619 620const struct iwl_dvm_cfg iwl_dvm_6000_cfg = { 621 .set_hw_params = iwl6000_hw_set_hw_params, 622 .set_channel_switch = iwl6000_hw_channel_switch, 623 .nic_config = iwl6000_nic_config, 624 .temperature = iwlagn_temperature, 625 .adv_thermal_throttle = true, 626 .support_ct_kill_exit = true, 627 .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF, 628 .chain_noise_scale = 1000, 629}; 630 631const struct iwl_dvm_cfg iwl_dvm_6005_cfg = { 632 .set_hw_params = iwl6000_hw_set_hw_params, 633 .set_channel_switch = iwl6000_hw_channel_switch, 634 .nic_config = iwl6000_nic_config, 635 .temperature = iwlagn_temperature, 636 .adv_thermal_throttle = true, 637 .support_ct_kill_exit = true, 638 .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF, 639 .chain_noise_scale = 1000, 640 .need_temp_offset_calib = true, 641}; 642 643const struct iwl_dvm_cfg iwl_dvm_6050_cfg = { 644 .set_hw_params = iwl6000_hw_set_hw_params, 645 .set_channel_switch = iwl6000_hw_channel_switch, 646 .nic_config = iwl6000_nic_config, 647 .temperature = iwlagn_temperature, 648 .adv_thermal_throttle = true, 649 .support_ct_kill_exit = true, 650 .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF, 651 .chain_noise_scale = 1500, 652}; 653 654static const struct iwl_dvm_bt_params iwl6000_bt_params = { 655 /* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */ 656 .advanced_bt_coexist = true, 657 .agg_time_limit = BT_AGG_THRESHOLD_DEF, 658 .bt_init_traffic_load = IWL_BT_COEX_TRAFFIC_LOAD_NONE, 659 .bt_prio_boost = IWLAGN_BT_PRIO_BOOST_DEFAULT, 660 .bt_sco_disable = true, 661}; 662 663const struct iwl_dvm_cfg iwl_dvm_6030_cfg = { 664 .set_hw_params = iwl6000_hw_set_hw_params, 665 .set_channel_switch = iwl6000_hw_channel_switch, 666 .nic_config = iwl6000_nic_config, 667 .temperature = iwlagn_temperature, 668 .adv_thermal_throttle = true, 669 .support_ct_kill_exit = true, 670 .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF, 671 .chain_noise_scale = 1000, 672 .bt_params = &iwl6000_bt_params, 673 .need_temp_offset_calib = true, 674 .adv_pm = true, 675};
~/
Read-only file preview.