File Index
Files and directories
Sign in
FILE

txgbevf_main.c

File preview with syntax highlighting.

linux-6.19.14/drivers/net/ethernet/wangxun/txgbevf/txgbevf_main.c C
  1// SPDX-License-Identifier: GPL-2.0
  2/* Copyright (c) 2015 - 2025 Beijing WangXun Technology Co., Ltd. */
  3
  4#include <linux/types.h>
  5#include <linux/module.h>
  6#include <linux/pci.h>
  7#include <linux/netdevice.h>
  8#include <linux/string.h>
  9#include <linux/etherdevice.h>
 10
 11#include "../libwx/wx_type.h"
 12#include "../libwx/wx_hw.h"
 13#include "../libwx/wx_lib.h"
 14#include "../libwx/wx_mbx.h"
 15#include "../libwx/wx_vf.h"
 16#include "../libwx/wx_vf_common.h"
 17#include "../libwx/wx_ethtool.h"
 18#include "txgbevf_type.h"
 19
 20/* txgbevf_pci_tbl - PCI Device ID Table
 21 *
 22 * Wildcard entries (PCI_ANY_ID) should come last
 23 * Last entry must be all 0s
 24 *
 25 * { Vendor ID, Device ID, SubVendor ID, SubDevice ID,
 26 *   Class, Class Mask, private data (not used) }
 27 */
 28static const struct pci_device_id txgbevf_pci_tbl[] = {
 29	{ PCI_VDEVICE(WANGXUN, TXGBEVF_DEV_ID_SP1000), 0},
 30	{ PCI_VDEVICE(WANGXUN, TXGBEVF_DEV_ID_WX1820), 0},
 31	{ PCI_VDEVICE(WANGXUN, TXGBEVF_DEV_ID_AML500F), 0},
 32	{ PCI_VDEVICE(WANGXUN, TXGBEVF_DEV_ID_AML510F), 0},
 33	{ PCI_VDEVICE(WANGXUN, TXGBEVF_DEV_ID_AML5024), 0},
 34	{ PCI_VDEVICE(WANGXUN, TXGBEVF_DEV_ID_AML5124), 0},
 35	{ PCI_VDEVICE(WANGXUN, TXGBEVF_DEV_ID_AML503F), 0},
 36	{ PCI_VDEVICE(WANGXUN, TXGBEVF_DEV_ID_AML513F), 0},
 37	/* required last entry */
 38	{ .device = 0 }
 39};
 40
 41static const struct net_device_ops txgbevf_netdev_ops = {
 42	.ndo_open               = wxvf_open,
 43	.ndo_stop               = wxvf_close,
 44	.ndo_start_xmit         = wx_xmit_frame,
 45	.ndo_validate_addr      = eth_validate_addr,
 46	.ndo_set_mac_address    = wx_set_mac_vf,
 47};
 48
 49static void txgbevf_set_num_queues(struct wx *wx)
 50{
 51	u32 def_q = 0, num_tcs = 0;
 52	u16 rss, queue;
 53	int ret = 0;
 54
 55	/* Start with base case */
 56	wx->num_rx_queues = 1;
 57	wx->num_tx_queues = 1;
 58
 59	spin_lock_bh(&wx->mbx.mbx_lock);
 60	/* fetch queue configuration from the PF */
 61	ret = wx_get_queues_vf(wx, &num_tcs, &def_q);
 62	spin_unlock_bh(&wx->mbx.mbx_lock);
 63
 64	if (ret)
 65		return;
 66
 67	/* we need as many queues as traffic classes */
 68	if (num_tcs > 1) {
 69		wx->num_rx_queues = num_tcs;
 70	} else {
 71		rss = min_t(u16, num_online_cpus(), TXGBEVF_MAX_RSS_NUM);
 72		queue = min_t(u16, wx->mac.max_rx_queues, wx->mac.max_tx_queues);
 73		rss = min_t(u16, queue, rss);
 74
 75		if (wx->vfinfo->vf_api >= wx_mbox_api_13) {
 76			wx->num_rx_queues = rss;
 77			wx->num_tx_queues = rss;
 78		}
 79	}
 80}
 81
 82static void txgbevf_init_type_code(struct wx *wx)
 83{
 84	switch (wx->device_id) {
 85	case TXGBEVF_DEV_ID_SP1000:
 86	case TXGBEVF_DEV_ID_WX1820:
 87		wx->mac.type = wx_mac_sp;
 88		break;
 89	case TXGBEVF_DEV_ID_AML500F:
 90	case TXGBEVF_DEV_ID_AML510F:
 91	case TXGBEVF_DEV_ID_AML5024:
 92	case TXGBEVF_DEV_ID_AML5124:
 93	case TXGBEVF_DEV_ID_AML503F:
 94	case TXGBEVF_DEV_ID_AML513F:
 95		wx->mac.type = wx_mac_aml;
 96		break;
 97	default:
 98		wx->mac.type = wx_mac_unknown;
 99		break;
100	}
101}
102
103static int txgbevf_sw_init(struct wx *wx)
104{
105	struct net_device *netdev = wx->netdev;
106	struct pci_dev *pdev = wx->pdev;
107	int err;
108
109	/* Initialize pcie info and common capability flags */
110	err = wx_sw_init(wx);
111	if (err < 0)
112		goto err_wx_sw_init;
113
114	/* Initialize the mailbox */
115	err = wx_init_mbx_params_vf(wx);
116	if (err)
117		goto err_init_mbx_params;
118
119	/* max q_vectors */
120	wx->mac.max_msix_vectors = TXGBEVF_MAX_MSIX_VECTORS;
121	/* Initialize the device type */
122	txgbevf_init_type_code(wx);
123	/* lock to protect mailbox accesses */
124	spin_lock_init(&wx->mbx.mbx_lock);
125
126	err = wx_reset_hw_vf(wx);
127	if (err) {
128		wx_err(wx, "PF still in reset state. Is the PF interface up?\n");
129		goto err_reset_hw;
130	}
131	wx_init_hw_vf(wx);
132	wx_negotiate_api_vf(wx);
133	if (is_zero_ether_addr(wx->mac.addr))
134		dev_info(&pdev->dev,
135			 "MAC address not assigned by administrator.\n");
136	eth_hw_addr_set(netdev, wx->mac.addr);
137
138	if (!is_valid_ether_addr(netdev->dev_addr)) {
139		dev_info(&pdev->dev, "Assigning random MAC address\n");
140		eth_hw_addr_random(netdev);
141		ether_addr_copy(wx->mac.addr, netdev->dev_addr);
142		ether_addr_copy(wx->mac.perm_addr, netdev->dev_addr);
143	}
144
145	wx->mac.max_tx_queues = TXGBEVF_MAX_TX_QUEUES;
146	wx->mac.max_rx_queues = TXGBEVF_MAX_RX_QUEUES;
147	/* Enable dynamic interrupt throttling rates */
148	wx->adaptive_itr = true;
149	wx->rx_itr_setting = 1;
150	wx->tx_itr_setting = 1;
151	/* set default ring sizes */
152	wx->tx_ring_count = TXGBEVF_DEFAULT_TXD;
153	wx->rx_ring_count = TXGBEVF_DEFAULT_RXD;
154	/* set default work limits */
155	wx->tx_work_limit = TXGBEVF_DEFAULT_TX_WORK;
156	wx->rx_work_limit = TXGBEVF_DEFAULT_RX_WORK;
157
158	wx->set_num_queues = txgbevf_set_num_queues;
159
160	switch (wx->mac.type) {
161	case wx_mac_sp:
162		break;
163	case wx_mac_aml:
164	case wx_mac_aml40:
165		set_bit(WX_FLAG_RX_MERGE_ENABLED, wx->flags);
166		set_bit(WX_FLAG_TXHEAD_WB_ENABLED, wx->flags);
167		break;
168	default:
169		break;
170	}
171
172	return 0;
173err_reset_hw:
174	kfree(wx->vfinfo);
175err_init_mbx_params:
176	kfree(wx->rss_key);
177	kfree(wx->mac_table);
178err_wx_sw_init:
179	return err;
180}
181
182/**
183 * txgbevf_probe - Device Initialization Routine
184 * @pdev: PCI device information struct
185 * @ent: entry in txgbevf_pci_tbl
186 *
187 * Return: return 0 on success, negative on failure
188 *
189 * txgbevf_probe initializes an adapter identified by a pci_dev structure.
190 * The OS initialization, configuring of the adapter private structure,
191 * and a hardware reset occur.
192 **/
193static int txgbevf_probe(struct pci_dev *pdev,
194			 const struct pci_device_id __always_unused *ent)
195{
196	struct net_device *netdev;
197	struct wx *wx = NULL;
198	int err;
199
200	err = pci_enable_device_mem(pdev);
201	if (err)
202		return err;
203
204	err = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64));
205	if (err) {
206		dev_err(&pdev->dev,
207			"No usable DMA configuration, aborting\n");
208		goto err_pci_disable_dev;
209	}
210
211	err = pci_request_selected_regions(pdev,
212					   pci_select_bars(pdev, IORESOURCE_MEM),
213					   dev_driver_string(&pdev->dev));
214	if (err) {
215		dev_err(&pdev->dev,
216			"pci_request_selected_regions failed 0x%x\n", err);
217		goto err_pci_disable_dev;
218	}
219
220	pci_set_master(pdev);
221
222	netdev = devm_alloc_etherdev_mqs(&pdev->dev,
223					 sizeof(struct wx),
224					 TXGBEVF_MAX_TX_QUEUES,
225					 TXGBEVF_MAX_RX_QUEUES);
226	if (!netdev) {
227		err = -ENOMEM;
228		goto err_pci_release_regions;
229	}
230
231	SET_NETDEV_DEV(netdev, &pdev->dev);
232
233	wx = netdev_priv(netdev);
234	wx->netdev = netdev;
235	wx->pdev = pdev;
236
237	wx->msg_enable = netif_msg_init(-1, NETIF_MSG_DRV |
238					NETIF_MSG_PROBE | NETIF_MSG_LINK);
239	wx->hw_addr = devm_ioremap(&pdev->dev,
240				   pci_resource_start(pdev, 0),
241				   pci_resource_len(pdev, 0));
242	if (!wx->hw_addr) {
243		err = -EIO;
244		goto err_pci_release_regions;
245	}
246
247	wx->b4_addr = devm_ioremap(&pdev->dev,
248				   pci_resource_start(pdev, 4),
249				   pci_resource_len(pdev, 4));
250	if (!wx->b4_addr) {
251		err = -EIO;
252		goto err_pci_release_regions;
253	}
254
255	wx->driver_name = KBUILD_MODNAME;
256	wx_set_ethtool_ops_vf(netdev);
257	netdev->netdev_ops = &txgbevf_netdev_ops;
258
259	/* setup the private structure */
260	err = txgbevf_sw_init(wx);
261	if (err)
262		goto err_pci_release_regions;
263
264	netdev->features |= NETIF_F_HIGHDMA;
265
266	eth_hw_addr_set(netdev, wx->mac.perm_addr);
267	ether_addr_copy(netdev->perm_addr, wx->mac.addr);
268
269	wxvf_init_service(wx);
270	err = wx_init_interrupt_scheme(wx);
271	if (err)
272		goto err_free_sw_init;
273
274	wx_get_fw_version_vf(wx);
275	err = register_netdev(netdev);
276	if (err)
277		goto err_register;
278
279	pci_set_drvdata(pdev, wx);
280	netif_tx_stop_all_queues(netdev);
281
282	return 0;
283
284err_register:
285	wx_clear_interrupt_scheme(wx);
286err_free_sw_init:
287	timer_delete_sync(&wx->service_timer);
288	cancel_work_sync(&wx->service_task);
289	kfree(wx->vfinfo);
290	kfree(wx->rss_key);
291	kfree(wx->mac_table);
292err_pci_release_regions:
293	pci_release_selected_regions(pdev,
294				     pci_select_bars(pdev, IORESOURCE_MEM));
295err_pci_disable_dev:
296	pci_disable_device(pdev);
297	return err;
298}
299
300/**
301 * txgbevf_remove - Device Removal Routine
302 * @pdev: PCI device information struct
303 *
304 * txgbevf_remove is called by the PCI subsystem to alert the driver
305 * that it should release a PCI device.  The could be caused by a
306 * Hot-Plug event, or because the driver is going to be removed from
307 * memory.
308 **/
309static void txgbevf_remove(struct pci_dev *pdev)
310{
311	wxvf_remove(pdev);
312}
313
314static DEFINE_SIMPLE_DEV_PM_OPS(txgbevf_pm_ops, wxvf_suspend, wxvf_resume);
315
316static struct pci_driver txgbevf_driver = {
317	.name     = KBUILD_MODNAME,
318	.id_table = txgbevf_pci_tbl,
319	.probe    = txgbevf_probe,
320	.remove   = txgbevf_remove,
321	.shutdown = wxvf_shutdown,
322	/* Power Management Hooks */
323	.driver.pm	= pm_sleep_ptr(&txgbevf_pm_ops)
324};
325
326module_pci_driver(txgbevf_driver);
327
328MODULE_DEVICE_TABLE(pci, txgbevf_pci_tbl);
329MODULE_AUTHOR("Beijing WangXun Technology Co., Ltd, <software@trustnetic.com>");
330MODULE_DESCRIPTION("WangXun(R) 10/25/40 Gigabit Virtual Function Network Driver");
331MODULE_LICENSE("GPL");
~/ Read-only file preview.