File Index
Files and directories
Sign in
FILE

ps3_gelic_net.c

File preview with syntax highlighting.

linux-6.19.14/drivers/net/ethernet/toshiba/ps3_gelic_net.c C
   1// SPDX-License-Identifier: GPL-2.0-or-later
   2/*
   3 *  PS3 gelic network driver.
   4 *
   5 * Copyright (C) 2007 Sony Computer Entertainment Inc.
   6 * Copyright 2006, 2007 Sony Corporation
   7 *
   8 * This file is based on: spider_net.c
   9 *
  10 * (C) Copyright IBM Corp. 2005
  11 *
  12 * Authors : Utz Bacher <utz.bacher@de.ibm.com>
  13 *           Jens Osterkamp <Jens.Osterkamp@de.ibm.com>
  14 */
  15
  16#undef DEBUG
  17
  18#include <linux/interrupt.h>
  19#include <linux/kernel.h>
  20#include <linux/module.h>
  21#include <linux/slab.h>
  22
  23#include <linux/etherdevice.h>
  24#include <linux/ethtool.h>
  25#include <linux/if_vlan.h>
  26
  27#include <linux/in.h>
  28#include <linux/ip.h>
  29#include <linux/tcp.h>
  30
  31#include <linux/dma-mapping.h>
  32#include <net/checksum.h>
  33#include <asm/firmware.h>
  34#include <asm/ps3.h>
  35#include <asm/lv1call.h>
  36
  37#include "ps3_gelic_net.h"
  38#include "ps3_gelic_wireless.h"
  39
  40#define DRV_NAME "Gelic Network Driver"
  41#define DRV_VERSION "2.0"
  42
  43MODULE_AUTHOR("SCE Inc.");
  44MODULE_DESCRIPTION("Gelic Network driver");
  45MODULE_LICENSE("GPL");
  46
  47
  48/* set irq_mask */
  49int gelic_card_set_irq_mask(struct gelic_card *card, u64 mask)
  50{
  51	int status;
  52
  53	status = lv1_net_set_interrupt_mask(bus_id(card), dev_id(card),
  54					    mask, 0);
  55	if (status)
  56		dev_info(ctodev(card),
  57			 "%s failed %d\n", __func__, status);
  58	return status;
  59}
  60
  61static void gelic_card_rx_irq_on(struct gelic_card *card)
  62{
  63	card->irq_mask |= GELIC_CARD_RXINT;
  64	gelic_card_set_irq_mask(card, card->irq_mask);
  65}
  66static void gelic_card_rx_irq_off(struct gelic_card *card)
  67{
  68	card->irq_mask &= ~GELIC_CARD_RXINT;
  69	gelic_card_set_irq_mask(card, card->irq_mask);
  70}
  71
  72static void gelic_card_get_ether_port_status(struct gelic_card *card,
  73					     int inform)
  74{
  75	u64 v2;
  76	struct net_device *ether_netdev;
  77
  78	lv1_net_control(bus_id(card), dev_id(card),
  79			GELIC_LV1_GET_ETH_PORT_STATUS,
  80			GELIC_LV1_VLAN_TX_ETHERNET_0, 0, 0,
  81			&card->ether_port_status, &v2);
  82
  83	if (inform) {
  84		ether_netdev = card->netdev[GELIC_PORT_ETHERNET_0];
  85		if (card->ether_port_status & GELIC_LV1_ETHER_LINK_UP)
  86			netif_carrier_on(ether_netdev);
  87		else
  88			netif_carrier_off(ether_netdev);
  89	}
  90}
  91
  92/**
  93 * gelic_descr_get_status -- returns the status of a descriptor
  94 * @descr: descriptor to look at
  95 *
  96 * returns the status as in the hw_regs.dmac_cmd_status field of the descriptor
  97 */
  98static enum gelic_descr_dma_status
  99gelic_descr_get_status(struct gelic_descr *descr)
 100{
 101	return be32_to_cpu(descr->hw_regs.dmac_cmd_status) &
 102		GELIC_DESCR_DMA_STAT_MASK;
 103}
 104
 105static int gelic_card_set_link_mode(struct gelic_card *card, int mode)
 106{
 107	int status;
 108	u64 v1, v2;
 109
 110	status = lv1_net_control(bus_id(card), dev_id(card),
 111				 GELIC_LV1_SET_NEGOTIATION_MODE,
 112				 GELIC_LV1_PHY_ETHERNET_0, mode, 0, &v1, &v2);
 113	if (status) {
 114		pr_info("%s: failed setting negotiation mode %d\n", __func__,
 115			status);
 116		return -EBUSY;
 117	}
 118
 119	card->link_mode = mode;
 120	return 0;
 121}
 122
 123/**
 124 * gelic_card_disable_txdmac - disables the transmit DMA controller
 125 * @card: card structure
 126 *
 127 * gelic_card_disable_txdmac terminates processing on the DMA controller by
 128 * turing off DMA and issuing a force end
 129 */
 130static void gelic_card_disable_txdmac(struct gelic_card *card)
 131{
 132	int status;
 133
 134	/* this hvc blocks until the DMA in progress really stopped */
 135	status = lv1_net_stop_tx_dma(bus_id(card), dev_id(card));
 136	if (status)
 137		dev_err(ctodev(card),
 138			"lv1_net_stop_tx_dma failed, status=%d\n", status);
 139}
 140
 141/**
 142 * gelic_card_enable_rxdmac - enables the receive DMA controller
 143 * @card: card structure
 144 *
 145 * gelic_card_enable_rxdmac enables the DMA controller by setting RX_DMA_EN
 146 * in the GDADMACCNTR register
 147 */
 148static void gelic_card_enable_rxdmac(struct gelic_card *card)
 149{
 150	int status;
 151
 152#ifdef DEBUG
 153	if (gelic_descr_get_status(card->rx_chain.head) !=
 154	    GELIC_DESCR_DMA_CARDOWNED) {
 155		printk(KERN_ERR "%s: status=%x\n", __func__,
 156		       be32_to_cpu(card->rx_chain.head->hw_regs.dmac_cmd_status));
 157		printk(KERN_ERR "%s: nextphy=%x\n", __func__,
 158		       be32_to_cpu(card->rx_chain.head->hw_regs.next_descr_addr));
 159		printk(KERN_ERR "%s: head=%p\n", __func__,
 160		       card->rx_chain.head);
 161	}
 162#endif
 163	status = lv1_net_start_rx_dma(bus_id(card), dev_id(card),
 164				card->rx_chain.head->link.cpu_addr, 0);
 165	if (status)
 166		dev_info(ctodev(card),
 167			 "lv1_net_start_rx_dma failed, status=%d\n", status);
 168}
 169
 170/**
 171 * gelic_card_disable_rxdmac - disables the receive DMA controller
 172 * @card: card structure
 173 *
 174 * gelic_card_disable_rxdmac terminates processing on the DMA controller by
 175 * turing off DMA and issuing a force end
 176 */
 177static void gelic_card_disable_rxdmac(struct gelic_card *card)
 178{
 179	int status;
 180
 181	/* this hvc blocks until the DMA in progress really stopped */
 182	status = lv1_net_stop_rx_dma(bus_id(card), dev_id(card));
 183	if (status)
 184		dev_err(ctodev(card),
 185			"lv1_net_stop_rx_dma failed, %d\n", status);
 186}
 187
 188/**
 189 * gelic_descr_set_status -- sets the status of a descriptor
 190 * @descr: descriptor to change
 191 * @status: status to set in the descriptor
 192 *
 193 * changes the status to the specified value. Doesn't change other bits
 194 * in the status
 195 */
 196static void gelic_descr_set_status(struct gelic_descr *descr,
 197				   enum gelic_descr_dma_status status)
 198{
 199	descr->hw_regs.dmac_cmd_status = cpu_to_be32(status |
 200			(be32_to_cpu(descr->hw_regs.dmac_cmd_status) &
 201			 ~GELIC_DESCR_DMA_STAT_MASK));
 202	/*
 203	 * dma_cmd_status field is used to indicate whether the descriptor
 204	 * is valid or not.
 205	 * Usually caller of this function wants to inform that to the
 206	 * hardware, so we assure here the hardware sees the change.
 207	 */
 208	wmb();
 209}
 210
 211/**
 212 * gelic_card_reset_chain - reset status of a descriptor chain
 213 * @card: card structure
 214 * @chain: address of chain
 215 * @start_descr: address of descriptor array
 216 *
 217 * Reset the status of dma descriptors to ready state
 218 * and re-initialize the hardware chain for later use
 219 */
 220static void gelic_card_reset_chain(struct gelic_card *card,
 221				   struct gelic_descr_chain *chain,
 222				   struct gelic_descr *start_descr)
 223{
 224	struct gelic_descr *descr;
 225
 226	for (descr = start_descr; start_descr != descr->next; descr++) {
 227		gelic_descr_set_status(descr, GELIC_DESCR_DMA_CARDOWNED);
 228		descr->hw_regs.next_descr_addr
 229			= cpu_to_be32(descr->next->link.cpu_addr);
 230	}
 231
 232	chain->head = start_descr;
 233	chain->tail = (descr - 1);
 234
 235	(descr - 1)->hw_regs.next_descr_addr = 0;
 236}
 237
 238void gelic_card_up(struct gelic_card *card)
 239{
 240	pr_debug("%s: called\n", __func__);
 241	mutex_lock(&card->updown_lock);
 242	if (atomic_inc_return(&card->users) == 1) {
 243		pr_debug("%s: real do\n", __func__);
 244		/* enable irq */
 245		gelic_card_set_irq_mask(card, card->irq_mask);
 246		/* start rx */
 247		gelic_card_enable_rxdmac(card);
 248
 249		napi_enable(&card->napi);
 250	}
 251	mutex_unlock(&card->updown_lock);
 252	pr_debug("%s: done\n", __func__);
 253}
 254
 255void gelic_card_down(struct gelic_card *card)
 256{
 257	u64 mask;
 258	pr_debug("%s: called\n", __func__);
 259	mutex_lock(&card->updown_lock);
 260	if (atomic_dec_if_positive(&card->users) == 0) {
 261		pr_debug("%s: real do\n", __func__);
 262		napi_disable(&card->napi);
 263		timer_delete_sync(&card->rx_oom_timer);
 264		/*
 265		 * Disable irq. Wireless interrupts will
 266		 * be disabled later if any
 267		 */
 268		mask = card->irq_mask & (GELIC_CARD_WLAN_EVENT_RECEIVED |
 269					 GELIC_CARD_WLAN_COMMAND_COMPLETED);
 270		gelic_card_set_irq_mask(card, mask);
 271		/* stop rx */
 272		gelic_card_disable_rxdmac(card);
 273		gelic_card_reset_chain(card, &card->rx_chain,
 274				       card->descr + GELIC_NET_TX_DESCRIPTORS);
 275		/* stop tx */
 276		gelic_card_disable_txdmac(card);
 277	}
 278	mutex_unlock(&card->updown_lock);
 279	pr_debug("%s: done\n", __func__);
 280}
 281
 282/**
 283 * gelic_card_free_chain - free descriptor chain
 284 * @card: card structure
 285 * @descr_in: address of desc
 286 */
 287static void gelic_card_free_chain(struct gelic_card *card,
 288				  struct gelic_descr *descr_in)
 289{
 290	struct gelic_descr *descr;
 291
 292	for (descr = descr_in; descr && descr->link.cpu_addr;
 293		descr = descr->next) {
 294		dma_unmap_single(ctodev(card), descr->link.cpu_addr,
 295				 descr->link.size, DMA_BIDIRECTIONAL);
 296		descr->link.cpu_addr = 0;
 297		descr->link.size = 0;
 298	}
 299}
 300
 301/**
 302 * gelic_card_init_chain - links descriptor chain
 303 * @card: card structure
 304 * @chain: address of chain
 305 * @start_descr: address of descriptor array
 306 * @no: number of descriptors
 307 *
 308 * we manage a circular list that mirrors the hardware structure,
 309 * except that the hardware uses bus addresses.
 310 *
 311 * returns 0 on success, <0 on failure
 312 */
 313static int gelic_card_init_chain(struct gelic_card *card,
 314				 struct gelic_descr_chain *chain,
 315				 struct gelic_descr *start_descr, int no)
 316{
 317	int i;
 318	struct gelic_descr *descr;
 319
 320	descr = start_descr;
 321	memset(descr, 0, sizeof(*descr) * no);
 322
 323	/* set up the hardware pointers in each descriptor */
 324	for (i = 0; i < no; i++, descr++) {
 325		gelic_descr_set_status(descr, GELIC_DESCR_DMA_NOT_IN_USE);
 326
 327		descr->link.size = sizeof(struct gelic_hw_regs);
 328		descr->link.cpu_addr = dma_map_single(ctodev(card), descr,
 329					  descr->link.size, DMA_BIDIRECTIONAL);
 330
 331		if (dma_mapping_error(ctodev(card), descr->link.cpu_addr)) {
 332			for (i--, descr--; 0 <= i; i--, descr--) {
 333				dma_unmap_single(ctodev(card),
 334					descr->link.cpu_addr, descr->link.size,
 335					DMA_BIDIRECTIONAL);
 336			}
 337			return -ENOMEM;
 338		}
 339
 340		descr->next = descr + 1;
 341		descr->prev = descr - 1;
 342	}
 343	/* make them as ring */
 344	(descr - 1)->next = start_descr;
 345	start_descr->prev = (descr - 1);
 346
 347	/* chain bus addr of hw descriptor */
 348	descr = start_descr;
 349	for (i = 0; i < no; i++, descr++) {
 350		descr->hw_regs.next_descr_addr =
 351			cpu_to_be32(descr->next->link.cpu_addr);
 352	}
 353
 354	chain->head = start_descr;
 355	chain->tail = start_descr;
 356
 357	/* do not chain last hw descriptor */
 358	(descr - 1)->hw_regs.next_descr_addr = 0;
 359
 360	return 0;
 361}
 362
 363/**
 364 * gelic_descr_prepare_rx - reinitializes a rx descriptor
 365 * @card: card structure
 366 * @descr: descriptor to re-init
 367 * @napi_mode: is it running in napi poll
 368 *
 369 * return 0 on success, <0 on failure
 370 *
 371 * allocates a new rx skb, iommu-maps it and attaches it to the descriptor.
 372 * Activate the descriptor state-wise
 373 *
 374 * Gelic RX sk_buffs must be aligned to GELIC_NET_RXBUF_ALIGN and the length
 375 * must be a multiple of GELIC_NET_RXBUF_ALIGN.
 376 */
 377static int gelic_descr_prepare_rx(struct gelic_card *card,
 378				  struct gelic_descr *descr,
 379				  bool napi_mode)
 380{
 381	static const unsigned int rx_skb_size =
 382		ALIGN(GELIC_NET_MAX_FRAME, GELIC_NET_RXBUF_ALIGN) +
 383		GELIC_NET_RXBUF_ALIGN - 1;
 384	dma_addr_t cpu_addr;
 385	int offset;
 386
 387	if (gelic_descr_get_status(descr) !=  GELIC_DESCR_DMA_NOT_IN_USE)
 388		dev_info(ctodev(card), "%s: ERROR status\n", __func__);
 389
 390	descr->hw_regs.dmac_cmd_status = 0;
 391	descr->hw_regs.result_size = 0;
 392	descr->hw_regs.valid_size = 0;
 393	descr->hw_regs.data_error = 0;
 394	descr->hw_regs.payload.dev_addr = 0;
 395	descr->hw_regs.payload.size = 0;
 396
 397	if (napi_mode)
 398		descr->skb = napi_alloc_skb(&card->napi, rx_skb_size);
 399	else
 400		descr->skb = netdev_alloc_skb(*card->netdev, rx_skb_size);
 401	if (!descr->skb) {
 402		descr->hw_regs.payload.dev_addr = 0; /* tell DMAC don't touch memory */
 403		return -ENOMEM;
 404	}
 405
 406	offset = ((unsigned long)descr->skb->data) &
 407		(GELIC_NET_RXBUF_ALIGN - 1);
 408	if (offset)
 409		skb_reserve(descr->skb, GELIC_NET_RXBUF_ALIGN - offset);
 410	/* io-mmu-map the skb */
 411	cpu_addr = dma_map_single(ctodev(card), descr->skb->data,
 412				  GELIC_NET_MAX_FRAME, DMA_FROM_DEVICE);
 413	descr->hw_regs.payload.dev_addr = cpu_to_be32(cpu_addr);
 414	if (dma_mapping_error(ctodev(card), cpu_addr)) {
 415		dev_kfree_skb_any(descr->skb);
 416		descr->skb = NULL;
 417		dev_info(ctodev(card),
 418			 "%s:Could not iommu-map rx buffer\n", __func__);
 419		gelic_descr_set_status(descr, GELIC_DESCR_DMA_NOT_IN_USE);
 420		return -ENOMEM;
 421	}
 422
 423	descr->hw_regs.payload.size = cpu_to_be32(GELIC_NET_MAX_FRAME);
 424	descr->hw_regs.payload.dev_addr = cpu_to_be32(cpu_addr);
 425
 426	gelic_descr_set_status(descr, GELIC_DESCR_DMA_CARDOWNED);
 427
 428	return 0;
 429}
 430
 431/**
 432 * gelic_card_release_rx_chain - free all skb of rx descr
 433 * @card: card structure
 434 *
 435 */
 436static void gelic_card_release_rx_chain(struct gelic_card *card)
 437{
 438	struct gelic_descr *descr = card->rx_chain.head;
 439
 440	do {
 441		if (descr->skb) {
 442			dma_unmap_single(ctodev(card),
 443				be32_to_cpu(descr->hw_regs.payload.dev_addr),
 444				descr->skb->len,
 445				DMA_FROM_DEVICE);
 446			descr->hw_regs.payload.dev_addr = 0;
 447			descr->hw_regs.payload.size = 0;
 448			dev_kfree_skb_any(descr->skb);
 449			descr->skb = NULL;
 450			gelic_descr_set_status(descr,
 451				GELIC_DESCR_DMA_NOT_IN_USE);
 452		}
 453		descr = descr->next;
 454	} while (descr != card->rx_chain.head);
 455}
 456
 457/**
 458 * gelic_card_fill_rx_chain - fills descriptors/skbs in the rx chains
 459 * @card: card structure
 460 *
 461 * fills all descriptors in the rx chain: allocates skbs
 462 * and iommu-maps them.
 463 * returns 0 on success, < 0 on failure
 464 */
 465static int gelic_card_fill_rx_chain(struct gelic_card *card)
 466{
 467	struct gelic_descr *descr = card->rx_chain.head;
 468	int ret;
 469
 470	do {
 471		if (!descr->skb) {
 472			ret = gelic_descr_prepare_rx(card, descr, false);
 473			if (ret)
 474				goto rewind;
 475		}
 476		descr = descr->next;
 477	} while (descr != card->rx_chain.head);
 478
 479	return 0;
 480rewind:
 481	gelic_card_release_rx_chain(card);
 482	return ret;
 483}
 484
 485/**
 486 * gelic_card_alloc_rx_skbs - allocates rx skbs in rx descriptor chains
 487 * @card: card structure
 488 *
 489 * returns 0 on success, < 0 on failure
 490 */
 491static int gelic_card_alloc_rx_skbs(struct gelic_card *card)
 492{
 493	struct gelic_descr_chain *chain;
 494	int ret;
 495	chain = &card->rx_chain;
 496	ret = gelic_card_fill_rx_chain(card);
 497	chain->tail = card->rx_top->prev; /* point to the last */
 498	return ret;
 499}
 500
 501/**
 502 * gelic_descr_release_tx - processes a used tx descriptor
 503 * @card: card structure
 504 * @descr: descriptor to release
 505 *
 506 * releases a used tx descriptor (unmapping, freeing of skb)
 507 */
 508static void gelic_descr_release_tx(struct gelic_card *card,
 509				       struct gelic_descr *descr)
 510{
 511	struct sk_buff *skb = descr->skb;
 512
 513	BUG_ON(!(be32_to_cpu(descr->hw_regs.data_status) & GELIC_DESCR_TX_TAIL));
 514
 515	dma_unmap_single(ctodev(card),
 516		be32_to_cpu(descr->hw_regs.payload.dev_addr), skb->len,
 517		DMA_TO_DEVICE);
 518	dev_kfree_skb_any(skb);
 519
 520	descr->hw_regs.payload.dev_addr = 0;
 521	descr->hw_regs.payload.size = 0;
 522	descr->hw_regs.next_descr_addr = 0;
 523	descr->hw_regs.result_size = 0;
 524	descr->hw_regs.valid_size = 0;
 525	descr->hw_regs.data_status = 0;
 526	descr->hw_regs.data_error = 0;
 527	descr->skb = NULL;
 528
 529	/* set descr status */
 530	gelic_descr_set_status(descr, GELIC_DESCR_DMA_NOT_IN_USE);
 531}
 532
 533static void gelic_card_stop_queues(struct gelic_card *card)
 534{
 535	netif_stop_queue(card->netdev[GELIC_PORT_ETHERNET_0]);
 536
 537	if (card->netdev[GELIC_PORT_WIRELESS])
 538		netif_stop_queue(card->netdev[GELIC_PORT_WIRELESS]);
 539}
 540static void gelic_card_wake_queues(struct gelic_card *card)
 541{
 542	netif_wake_queue(card->netdev[GELIC_PORT_ETHERNET_0]);
 543
 544	if (card->netdev[GELIC_PORT_WIRELESS])
 545		netif_wake_queue(card->netdev[GELIC_PORT_WIRELESS]);
 546}
 547/**
 548 * gelic_card_release_tx_chain - processes sent tx descriptors
 549 * @card: adapter structure
 550 * @stop: net_stop sequence
 551 *
 552 * releases the tx descriptors that gelic has finished with
 553 */
 554static void gelic_card_release_tx_chain(struct gelic_card *card, int stop)
 555{
 556	struct gelic_descr_chain *tx_chain;
 557	enum gelic_descr_dma_status status;
 558	struct net_device *netdev;
 559	int release = 0;
 560
 561	for (tx_chain = &card->tx_chain;
 562	     tx_chain->head != tx_chain->tail && tx_chain->tail;
 563	     tx_chain->tail = tx_chain->tail->next) {
 564		status = gelic_descr_get_status(tx_chain->tail);
 565		netdev = tx_chain->tail->skb->dev;
 566		switch (status) {
 567		case GELIC_DESCR_DMA_RESPONSE_ERROR:
 568		case GELIC_DESCR_DMA_PROTECTION_ERROR:
 569		case GELIC_DESCR_DMA_FORCE_END:
 570			if (printk_ratelimit())
 571				dev_info(ctodev(card),
 572					 "%s: forcing end of tx descriptor " \
 573					 "with status %x\n",
 574					 __func__, status);
 575			netdev->stats.tx_dropped++;
 576			break;
 577
 578		case GELIC_DESCR_DMA_COMPLETE:
 579			if (tx_chain->tail->skb) {
 580				netdev->stats.tx_packets++;
 581				netdev->stats.tx_bytes +=
 582					tx_chain->tail->skb->len;
 583			}
 584			break;
 585
 586		case GELIC_DESCR_DMA_CARDOWNED:
 587			/* pending tx request */
 588		default:
 589			/* any other value (== GELIC_DESCR_DMA_NOT_IN_USE) */
 590			if (!stop)
 591				goto out;
 592		}
 593		gelic_descr_release_tx(card, tx_chain->tail);
 594		release ++;
 595	}
 596out:
 597	if (!stop && release)
 598		gelic_card_wake_queues(card);
 599}
 600
 601/**
 602 * gelic_net_set_multi - sets multicast addresses and promisc flags
 603 * @netdev: interface device structure
 604 *
 605 * gelic_net_set_multi configures multicast addresses as needed for the
 606 * netdev interface. It also sets up multicast, allmulti and promisc
 607 * flags appropriately
 608 */
 609void gelic_net_set_multi(struct net_device *netdev)
 610{
 611	struct gelic_card *card = netdev_card(netdev);
 612	struct netdev_hw_addr *ha;
 613	unsigned int i;
 614	uint8_t *p;
 615	u64 addr;
 616	int status;
 617
 618	/* clear all multicast address */
 619	status = lv1_net_remove_multicast_address(bus_id(card), dev_id(card),
 620						  0, 1);
 621	if (status)
 622		dev_err(ctodev(card),
 623			"lv1_net_remove_multicast_address failed %d\n",
 624			status);
 625	/* set broadcast address */
 626	status = lv1_net_add_multicast_address(bus_id(card), dev_id(card),
 627					       GELIC_NET_BROADCAST_ADDR, 0);
 628	if (status)
 629		dev_err(ctodev(card),
 630			"lv1_net_add_multicast_address failed, %d\n",
 631			status);
 632
 633	if ((netdev->flags & IFF_ALLMULTI) ||
 634	    (netdev_mc_count(netdev) > GELIC_NET_MC_COUNT_MAX)) {
 635		status = lv1_net_add_multicast_address(bus_id(card),
 636						       dev_id(card),
 637						       0, 1);
 638		if (status)
 639			dev_err(ctodev(card),
 640				"lv1_net_add_multicast_address failed, %d\n",
 641				status);
 642		return;
 643	}
 644
 645	/* set multicast addresses */
 646	netdev_for_each_mc_addr(ha, netdev) {
 647		addr = 0;
 648		p = ha->addr;
 649		for (i = 0; i < ETH_ALEN; i++) {
 650			addr <<= 8;
 651			addr |= *p++;
 652		}
 653		status = lv1_net_add_multicast_address(bus_id(card),
 654						       dev_id(card),
 655						       addr, 0);
 656		if (status)
 657			dev_err(ctodev(card),
 658				"lv1_net_add_multicast_address failed, %d\n",
 659				status);
 660	}
 661}
 662
 663/**
 664 * gelic_net_stop - called upon ifconfig down
 665 * @netdev: interface device structure
 666 *
 667 * always returns 0
 668 */
 669int gelic_net_stop(struct net_device *netdev)
 670{
 671	struct gelic_card *card;
 672
 673	pr_debug("%s: start\n", __func__);
 674
 675	netif_stop_queue(netdev);
 676	netif_carrier_off(netdev);
 677
 678	card = netdev_card(netdev);
 679	gelic_card_down(card);
 680
 681	pr_debug("%s: done\n", __func__);
 682	return 0;
 683}
 684
 685/**
 686 * gelic_card_get_next_tx_descr - returns the next available tx descriptor
 687 * @card: device structure to get descriptor from
 688 *
 689 * returns the address of the next descriptor, or NULL if not available.
 690 */
 691static struct gelic_descr *
 692gelic_card_get_next_tx_descr(struct gelic_card *card)
 693{
 694	if (!card->tx_chain.head)
 695		return NULL;
 696	/*  see if the next descriptor is free */
 697	if (card->tx_chain.tail != card->tx_chain.head->next &&
 698	    gelic_descr_get_status(card->tx_chain.head) ==
 699	    GELIC_DESCR_DMA_NOT_IN_USE)
 700		return card->tx_chain.head;
 701	else
 702		return NULL;
 703
 704}
 705
 706/**
 707 * gelic_descr_set_tx_cmdstat - sets the tx descriptor command field
 708 * @descr: descriptor structure to fill out
 709 * @skb: packet to consider
 710 *
 711 * fills out the command and status field of the descriptor structure,
 712 * depending on hardware checksum settings. This function assumes a wmb()
 713 * has executed before.
 714 */
 715static void gelic_descr_set_tx_cmdstat(struct gelic_descr *descr,
 716				       struct sk_buff *skb)
 717{
 718	if (skb->ip_summed != CHECKSUM_PARTIAL)
 719		descr->hw_regs.dmac_cmd_status =
 720			cpu_to_be32(GELIC_DESCR_DMA_CMD_NO_CHKSUM |
 721				    GELIC_DESCR_TX_DMA_FRAME_TAIL);
 722	else {
 723		/* is packet ip?
 724		 * if yes: tcp? udp? */
 725		if (skb->protocol == htons(ETH_P_IP)) {
 726			if (ip_hdr(skb)->protocol == IPPROTO_TCP)
 727				descr->hw_regs.dmac_cmd_status =
 728				cpu_to_be32(GELIC_DESCR_DMA_CMD_TCP_CHKSUM |
 729					    GELIC_DESCR_TX_DMA_FRAME_TAIL);
 730
 731			else if (ip_hdr(skb)->protocol == IPPROTO_UDP)
 732				descr->hw_regs.dmac_cmd_status =
 733				cpu_to_be32(GELIC_DESCR_DMA_CMD_UDP_CHKSUM |
 734					    GELIC_DESCR_TX_DMA_FRAME_TAIL);
 735			else	/*
 736				 * the stack should checksum non-tcp and non-udp
 737				 * packets on his own: NETIF_F_IP_CSUM
 738				 */
 739				descr->hw_regs.dmac_cmd_status =
 740				cpu_to_be32(GELIC_DESCR_DMA_CMD_NO_CHKSUM |
 741					    GELIC_DESCR_TX_DMA_FRAME_TAIL);
 742		}
 743	}
 744}
 745
 746static struct sk_buff *gelic_put_vlan_tag(struct sk_buff *skb,
 747						 unsigned short tag)
 748{
 749	struct vlan_ethhdr *veth;
 750	static unsigned int c;
 751
 752	if (skb_headroom(skb) < VLAN_HLEN) {
 753		struct sk_buff *sk_tmp = skb;
 754		pr_debug("%s: hd=%d c=%ud\n", __func__, skb_headroom(skb), c);
 755		skb = skb_realloc_headroom(sk_tmp, VLAN_HLEN);
 756		if (!skb)
 757			return NULL;
 758		dev_kfree_skb_any(sk_tmp);
 759	}
 760	veth = skb_push(skb, VLAN_HLEN);
 761
 762	/* Move the mac addresses to the top of buffer */
 763	memmove(skb->data, skb->data + VLAN_HLEN, 2 * ETH_ALEN);
 764
 765	veth->h_vlan_proto = cpu_to_be16(ETH_P_8021Q);
 766	veth->h_vlan_TCI = htons(tag);
 767
 768	return skb;
 769}
 770
 771/**
 772 * gelic_descr_prepare_tx - setup a descriptor for sending packets
 773 * @card: card structure
 774 * @descr: descriptor structure
 775 * @skb: packet to use
 776 *
 777 * returns 0 on success, <0 on failure.
 778 *
 779 */
 780static int gelic_descr_prepare_tx(struct gelic_card *card,
 781				  struct gelic_descr *descr,
 782				  struct sk_buff *skb)
 783{
 784	dma_addr_t buf;
 785
 786	if (card->vlan_required) {
 787		struct sk_buff *skb_tmp;
 788		enum gelic_port_type type;
 789
 790		type = netdev_port(skb->dev)->type;
 791		skb_tmp = gelic_put_vlan_tag(skb,
 792					     card->vlan[type].tx);
 793		if (!skb_tmp)
 794			return -ENOMEM;
 795		skb = skb_tmp;
 796	}
 797
 798	buf = dma_map_single(ctodev(card), skb->data, skb->len, DMA_TO_DEVICE);
 799
 800	if (dma_mapping_error(ctodev(card), buf)) {
 801		dev_err(ctodev(card),
 802			"dma map 2 failed (%p, %i). Dropping packet\n",
 803			skb->data, skb->len);
 804		return -ENOMEM;
 805	}
 806
 807	descr->hw_regs.payload.dev_addr = cpu_to_be32(buf);
 808	descr->hw_regs.payload.size = cpu_to_be32(skb->len);
 809	descr->skb = skb;
 810	descr->hw_regs.data_status = 0;
 811	descr->hw_regs.next_descr_addr = 0; /* terminate hw descr */
 812	gelic_descr_set_tx_cmdstat(descr, skb);
 813
 814	/* bump free descriptor pointer */
 815	card->tx_chain.head = descr->next;
 816	return 0;
 817}
 818
 819/**
 820 * gelic_card_kick_txdma - enables TX DMA processing
 821 * @card: card structure
 822 * @descr: descriptor address to enable TX processing at
 823 *
 824 */
 825static int gelic_card_kick_txdma(struct gelic_card *card,
 826				 struct gelic_descr *descr)
 827{
 828	int status = 0;
 829
 830	if (card->tx_dma_progress)
 831		return 0;
 832
 833	if (gelic_descr_get_status(descr) == GELIC_DESCR_DMA_CARDOWNED) {
 834		card->tx_dma_progress = 1;
 835		status = lv1_net_start_tx_dma(bus_id(card), dev_id(card),
 836			descr->link.cpu_addr, 0);
 837		if (status) {
 838			card->tx_dma_progress = 0;
 839			dev_info(ctodev(card), "lv1_net_start_txdma failed," \
 840				 "status=%d\n", status);
 841		}
 842	}
 843	return status;
 844}
 845
 846/**
 847 * gelic_net_xmit - transmits a frame over the device
 848 * @skb: packet to send out
 849 * @netdev: interface device structure
 850 *
 851 * returns NETDEV_TX_OK on success, NETDEV_TX_BUSY on failure
 852 */
 853netdev_tx_t gelic_net_xmit(struct sk_buff *skb, struct net_device *netdev)
 854{
 855	struct gelic_card *card = netdev_card(netdev);
 856	struct gelic_descr *descr;
 857	int result;
 858	unsigned long flags;
 859
 860	spin_lock_irqsave(&card->tx_lock, flags);
 861
 862	gelic_card_release_tx_chain(card, 0);
 863
 864	descr = gelic_card_get_next_tx_descr(card);
 865	if (!descr) {
 866		/*
 867		 * no more descriptors free
 868		 */
 869		gelic_card_stop_queues(card);
 870		spin_unlock_irqrestore(&card->tx_lock, flags);
 871		return NETDEV_TX_BUSY;
 872	}
 873
 874	result = gelic_descr_prepare_tx(card, descr, skb);
 875	if (result) {
 876		/*
 877		 * DMA map failed.  As chances are that failure
 878		 * would continue, just release skb and return
 879		 */
 880		netdev->stats.tx_dropped++;
 881		dev_kfree_skb_any(skb);
 882		spin_unlock_irqrestore(&card->tx_lock, flags);
 883		return NETDEV_TX_OK;
 884	}
 885	/*
 886	 * link this prepared descriptor to previous one
 887	 * to achieve high performance
 888	 */
 889	descr->prev->hw_regs.next_descr_addr =
 890		cpu_to_be32(descr->link.cpu_addr);
 891	/*
 892	 * as hardware descriptor is modified in the above lines,
 893	 * ensure that the hardware sees it
 894	 */
 895	wmb();
 896	if (gelic_card_kick_txdma(card, descr)) {
 897		/*
 898		 * kick failed.
 899		 * release descriptor which was just prepared
 900		 */
 901		netdev->stats.tx_dropped++;
 902		/* don't trigger BUG_ON() in gelic_descr_release_tx */
 903		descr->hw_regs.data_status = cpu_to_be32(GELIC_DESCR_TX_TAIL);
 904		gelic_descr_release_tx(card, descr);
 905		/* reset head */
 906		card->tx_chain.head = descr;
 907		/* reset hw termination */
 908		descr->prev->hw_regs.next_descr_addr = 0;
 909		dev_info(ctodev(card), "%s: kick failure\n", __func__);
 910	}
 911
 912	spin_unlock_irqrestore(&card->tx_lock, flags);
 913	return NETDEV_TX_OK;
 914}
 915
 916/**
 917 * gelic_net_pass_skb_up - takes an skb from a descriptor and passes it on
 918 * @descr: descriptor to process
 919 * @card: card structure
 920 * @netdev: net_device structure to be passed packet
 921 *
 922 * iommu-unmaps the skb, fills out skb structure and passes the data to the
 923 * stack. The descriptor state is not changed.
 924 */
 925static void gelic_net_pass_skb_up(struct gelic_descr *descr,
 926				  struct gelic_card *card,
 927				  struct net_device *netdev)
 928
 929{
 930	struct sk_buff *skb = descr->skb;
 931	u32 data_status, data_error;
 932
 933	data_status = be32_to_cpu(descr->hw_regs.data_status);
 934	data_error = be32_to_cpu(descr->hw_regs.data_error);
 935	/* unmap skb buffer */
 936	dma_unmap_single(ctodev(card),
 937		be32_to_cpu(descr->hw_regs.payload.dev_addr),
 938		be32_to_cpu(descr->hw_regs.payload.size), DMA_FROM_DEVICE);
 939
 940	skb_put(skb, be32_to_cpu(descr->hw_regs.valid_size)?
 941		be32_to_cpu(descr->hw_regs.valid_size) :
 942		be32_to_cpu(descr->hw_regs.result_size));
 943	if (!descr->hw_regs.valid_size)
 944		dev_info(ctodev(card), "buffer full %x %x %x\n",
 945			 be32_to_cpu(descr->hw_regs.result_size),
 946			 be32_to_cpu(descr->hw_regs.payload.size),
 947			 be32_to_cpu(descr->hw_regs.dmac_cmd_status));
 948
 949	descr->skb = NULL;
 950	/*
 951	 * the card put 2 bytes vlan tag in front
 952	 * of the ethernet frame
 953	 */
 954	skb_pull(skb, 2);
 955	skb->protocol = eth_type_trans(skb, netdev);
 956
 957	/* checksum offload */
 958	if (netdev->features & NETIF_F_RXCSUM) {
 959		if ((data_status & GELIC_DESCR_DATA_STATUS_CHK_MASK) &&
 960		    (!(data_error & GELIC_DESCR_DATA_ERROR_CHK_MASK)))
 961			skb->ip_summed = CHECKSUM_UNNECESSARY;
 962		else
 963			skb_checksum_none_assert(skb);
 964	} else
 965		skb_checksum_none_assert(skb);
 966
 967	/* update netdevice statistics */
 968	netdev->stats.rx_packets++;
 969	netdev->stats.rx_bytes += skb->len;
 970
 971	/* pass skb up to stack */
 972	napi_gro_receive(&card->napi, skb);
 973}
 974
 975/**
 976 * gelic_card_decode_one_descr - processes an rx descriptor
 977 * @card: card structure
 978 *
 979 * returns 1 if a packet has been sent to the stack, -ENOMEM on skb alloc
 980 * failure, otherwise 0
 981 *
 982 * processes an rx descriptor by iommu-unmapping the data buffer and passing
 983 * the packet up to the stack
 984 */
 985static int gelic_card_decode_one_descr(struct gelic_card *card)
 986{
 987	enum gelic_descr_dma_status status;
 988	struct gelic_descr_chain *chain = &card->rx_chain;
 989	struct gelic_descr *descr = chain->head;
 990	struct net_device *netdev = NULL;
 991	int dmac_chain_ended = 0;
 992	int prepare_rx_ret;
 993
 994	status = gelic_descr_get_status(descr);
 995
 996	if (status == GELIC_DESCR_DMA_CARDOWNED)
 997		return 0;
 998
 999	if (status == GELIC_DESCR_DMA_NOT_IN_USE || !descr->skb) {
1000		dev_dbg(ctodev(card), "dormant descr? %p\n", descr);
1001		dmac_chain_ended = 1;
1002		goto refill;
1003	}
1004
1005	/* netdevice select */
1006	if (card->vlan_required) {
1007		unsigned int i;
1008		u16 vid;
1009		vid = *(u16 *)(descr->skb->data) & VLAN_VID_MASK;
1010		for (i = 0; i < GELIC_PORT_MAX; i++) {
1011			if (card->vlan[i].rx == vid) {
1012				netdev = card->netdev[i];
1013				break;
1014			}
1015		}
1016		if (GELIC_PORT_MAX <= i) {
1017			pr_info("%s: unknown packet vid=%x\n", __func__, vid);
1018			goto refill;
1019		}
1020	} else
1021		netdev = card->netdev[GELIC_PORT_ETHERNET_0];
1022
1023	if ((status == GELIC_DESCR_DMA_RESPONSE_ERROR) ||
1024	    (status == GELIC_DESCR_DMA_PROTECTION_ERROR) ||
1025	    (status == GELIC_DESCR_DMA_FORCE_END)) {
1026		dev_info(ctodev(card), "dropping RX descriptor with state %x\n",
1027			 status);
1028		netdev->stats.rx_dropped++;
1029		goto refill;
1030	}
1031
1032	if (status == GELIC_DESCR_DMA_BUFFER_FULL) {
1033		/*
1034		 * Buffer full would occur if and only if
1035		 * the frame length was longer than the size of this
1036		 * descriptor's buffer.  If the frame length was equal
1037		 * to or shorter than buffer'size, FRAME_END condition
1038		 * would occur.
1039		 * Anyway this frame was longer than the MTU,
1040		 * just drop it.
1041		 */
1042		dev_info(ctodev(card), "overlength frame\n");
1043		goto refill;
1044	}
1045	/*
1046	 * descriptors any other than FRAME_END here should
1047	 * be treated as error.
1048	 */
1049	if (status != GELIC_DESCR_DMA_FRAME_END) {
1050		dev_dbg(ctodev(card), "RX descriptor with state %x\n",
1051			status);
1052		goto refill;
1053	}
1054
1055	/* ok, we've got a packet in descr */
1056	gelic_net_pass_skb_up(descr, card, netdev);
1057refill:
1058
1059	/* is the current descriptor terminated with next_descr == NULL? */
1060	if (!dmac_chain_ended)
1061		dmac_chain_ended =
1062			be32_to_cpu(descr->hw_regs.dmac_cmd_status) &
1063			GELIC_DESCR_RX_DMA_CHAIN_END;
1064	/*
1065	 * So that always DMAC can see the end
1066	 * of the descriptor chain to avoid
1067	 * from unwanted DMAC overrun.
1068	 */
1069	descr->hw_regs.next_descr_addr = 0;
1070
1071	/* change the descriptor state: */
1072	gelic_descr_set_status(descr, GELIC_DESCR_DMA_NOT_IN_USE);
1073
1074	/*
1075	 * this call can fail, propagate the error
1076	 */
1077	prepare_rx_ret = gelic_descr_prepare_rx(card, descr, true);
1078	if (prepare_rx_ret)
1079		return prepare_rx_ret;
1080
1081	chain->tail = descr;
1082	chain->head = descr->next;
1083
1084	/*
1085	 * Set this descriptor the end of the chain.
1086	 */
1087	descr->prev->hw_regs.next_descr_addr =
1088		cpu_to_be32(descr->link.cpu_addr);
1089
1090	/*
1091	 * If dmac chain was met, DMAC stopped.
1092	 * thus re-enable it
1093	 */
1094
1095	if (dmac_chain_ended)
1096		gelic_card_enable_rxdmac(card);
1097
1098	return 1;
1099}
1100
1101static void gelic_rx_oom_timer(struct timer_list *t)
1102{
1103	struct gelic_card *card = timer_container_of(card, t, rx_oom_timer);
1104
1105	napi_schedule(&card->napi);
1106}
1107
1108/**
1109 * gelic_net_poll - NAPI poll function called by the stack to return packets
1110 * @napi: napi structure
1111 * @budget: number of packets we can pass to the stack at most
1112 *
1113 * returns the number of the processed packets
1114 *
1115 */
1116static int gelic_net_poll(struct napi_struct *napi, int budget)
1117{
1118	struct gelic_card *card = container_of(napi, struct gelic_card, napi);
1119	int packets_done = 0;
1120	int work_result = 0;
1121
1122	while (packets_done < budget) {
1123		work_result = gelic_card_decode_one_descr(card);
1124		if (work_result != 1)
1125			break;
1126
1127		packets_done++;
1128	}
1129
1130	if (work_result == -ENOMEM) {
1131		napi_complete_done(napi, packets_done);
1132		mod_timer(&card->rx_oom_timer, jiffies + 1);
1133		return packets_done;
1134	}
1135
1136	if (packets_done < budget) {
1137		napi_complete_done(napi, packets_done);
1138		gelic_card_rx_irq_on(card);
1139	}
1140	return packets_done;
1141}
1142
1143/*
1144 * gelic_card_interrupt - event handler for gelic_net
1145 */
1146static irqreturn_t gelic_card_interrupt(int irq, void *ptr)
1147{
1148	unsigned long flags;
1149	struct gelic_card *card = ptr;
1150	u64 status;
1151
1152	status = card->irq_status;
1153
1154	if (!status)
1155		return IRQ_NONE;
1156
1157	status &= card->irq_mask;
1158
1159	if (status & GELIC_CARD_RXINT) {
1160		gelic_card_rx_irq_off(card);
1161		napi_schedule(&card->napi);
1162	}
1163
1164	if (status & GELIC_CARD_TXINT) {
1165		spin_lock_irqsave(&card->tx_lock, flags);
1166		card->tx_dma_progress = 0;
1167		gelic_card_release_tx_chain(card, 0);
1168		/* kick outstanding tx descriptor if any */
1169		gelic_card_kick_txdma(card, card->tx_chain.tail);
1170		spin_unlock_irqrestore(&card->tx_lock, flags);
1171	}
1172
1173	/* ether port status changed */
1174	if (status & GELIC_CARD_PORT_STATUS_CHANGED)
1175		gelic_card_get_ether_port_status(card, 1);
1176
1177#ifdef CONFIG_GELIC_WIRELESS
1178	if (status & (GELIC_CARD_WLAN_EVENT_RECEIVED |
1179		      GELIC_CARD_WLAN_COMMAND_COMPLETED))
1180		gelic_wl_interrupt(card->netdev[GELIC_PORT_WIRELESS], status);
1181#endif
1182
1183	return IRQ_HANDLED;
1184}
1185
1186#ifdef CONFIG_NET_POLL_CONTROLLER
1187/**
1188 * gelic_net_poll_controller - artificial interrupt for netconsole etc.
1189 * @netdev: interface device structure
1190 *
1191 * see Documentation/networking/netconsole.rst
1192 */
1193void gelic_net_poll_controller(struct net_device *netdev)
1194{
1195	struct gelic_card *card = netdev_card(netdev);
1196
1197	gelic_card_set_irq_mask(card, 0);
1198	gelic_card_interrupt(netdev->irq, netdev);
1199	gelic_card_set_irq_mask(card, card->irq_mask);
1200}
1201#endif /* CONFIG_NET_POLL_CONTROLLER */
1202
1203/**
1204 * gelic_net_open - called upon ifconfig up
1205 * @netdev: interface device structure
1206 *
1207 * returns 0 on success, <0 on failure
1208 *
1209 * gelic_net_open allocates all the descriptors and memory needed for
1210 * operation, sets up multicast list and enables interrupts
1211 */
1212int gelic_net_open(struct net_device *netdev)
1213{
1214	struct gelic_card *card = netdev_card(netdev);
1215
1216	dev_dbg(ctodev(card), " -> %s %p\n", __func__, netdev);
1217
1218	gelic_card_up(card);
1219
1220	netif_start_queue(netdev);
1221	gelic_card_get_ether_port_status(card, 1);
1222
1223	dev_dbg(ctodev(card), " <- %s\n", __func__);
1224	return 0;
1225}
1226
1227void gelic_net_get_drvinfo(struct net_device *netdev,
1228			   struct ethtool_drvinfo *info)
1229{
1230	strscpy(info->driver, DRV_NAME, sizeof(info->driver));
1231	strscpy(info->version, DRV_VERSION, sizeof(info->version));
1232}
1233
1234static int gelic_ether_get_link_ksettings(struct net_device *netdev,
1235					  struct ethtool_link_ksettings *cmd)
1236{
1237	struct gelic_card *card = netdev_card(netdev);
1238	u32 supported, advertising;
1239
1240	gelic_card_get_ether_port_status(card, 0);
1241
1242	if (card->ether_port_status & GELIC_LV1_ETHER_FULL_DUPLEX)
1243		cmd->base.duplex = DUPLEX_FULL;
1244	else
1245		cmd->base.duplex = DUPLEX_HALF;
1246
1247	switch (card->ether_port_status & GELIC_LV1_ETHER_SPEED_MASK) {
1248	case GELIC_LV1_ETHER_SPEED_10:
1249		cmd->base.speed = SPEED_10;
1250		break;
1251	case GELIC_LV1_ETHER_SPEED_100:
1252		cmd->base.speed = SPEED_100;
1253		break;
1254	case GELIC_LV1_ETHER_SPEED_1000:
1255		cmd->base.speed = SPEED_1000;
1256		break;
1257	default:
1258		pr_info("%s: speed unknown\n", __func__);
1259		cmd->base.speed = SPEED_10;
1260		break;
1261	}
1262
1263	supported = SUPPORTED_TP | SUPPORTED_Autoneg |
1264			SUPPORTED_10baseT_Half | SUPPORTED_10baseT_Full |
1265			SUPPORTED_100baseT_Half | SUPPORTED_100baseT_Full |
1266			SUPPORTED_1000baseT_Full;
1267	advertising = supported;
1268	if (card->link_mode & GELIC_LV1_ETHER_AUTO_NEG) {
1269		cmd->base.autoneg = AUTONEG_ENABLE;
1270	} else {
1271		cmd->base.autoneg = AUTONEG_DISABLE;
1272		advertising &= ~ADVERTISED_Autoneg;
1273	}
1274	cmd->base.port = PORT_TP;
1275
1276	ethtool_convert_legacy_u32_to_link_mode(cmd->link_modes.supported,
1277						supported);
1278	ethtool_convert_legacy_u32_to_link_mode(cmd->link_modes.advertising,
1279						advertising);
1280
1281	return 0;
1282}
1283
1284static int
1285gelic_ether_set_link_ksettings(struct net_device *netdev,
1286			       const struct ethtool_link_ksettings *cmd)
1287{
1288	struct gelic_card *card = netdev_card(netdev);
1289	u64 mode;
1290	int ret;
1291
1292	if (cmd->base.autoneg == AUTONEG_ENABLE) {
1293		mode = GELIC_LV1_ETHER_AUTO_NEG;
1294	} else {
1295		switch (cmd->base.speed) {
1296		case SPEED_10:
1297			mode = GELIC_LV1_ETHER_SPEED_10;
1298			break;
1299		case SPEED_100:
1300			mode = GELIC_LV1_ETHER_SPEED_100;
1301			break;
1302		case SPEED_1000:
1303			mode = GELIC_LV1_ETHER_SPEED_1000;
1304			break;
1305		default:
1306			return -EINVAL;
1307		}
1308		if (cmd->base.duplex == DUPLEX_FULL) {
1309			mode |= GELIC_LV1_ETHER_FULL_DUPLEX;
1310		} else if (cmd->base.speed == SPEED_1000) {
1311			pr_info("1000 half duplex is not supported.\n");
1312			return -EINVAL;
1313		}
1314	}
1315
1316	ret = gelic_card_set_link_mode(card, mode);
1317
1318	if (ret)
1319		return ret;
1320
1321	return 0;
1322}
1323
1324static void gelic_net_get_wol(struct net_device *netdev,
1325			      struct ethtool_wolinfo *wol)
1326{
1327	if (0 <= ps3_compare_firmware_version(2, 2, 0))
1328		wol->supported = WAKE_MAGIC;
1329	else
1330		wol->supported = 0;
1331
1332	wol->wolopts = ps3_sys_manager_get_wol() ? wol->supported : 0;
1333	memset(&wol->sopass, 0, sizeof(wol->sopass));
1334}
1335static int gelic_net_set_wol(struct net_device *netdev,
1336			     struct ethtool_wolinfo *wol)
1337{
1338	int status;
1339	struct gelic_card *card;
1340	u64 v1, v2;
1341
1342	if (ps3_compare_firmware_version(2, 2, 0) < 0 ||
1343	    !capable(CAP_NET_ADMIN))
1344		return -EPERM;
1345
1346	if (wol->wolopts & ~WAKE_MAGIC)
1347		return -EINVAL;
1348
1349	card = netdev_card(netdev);
1350	if (wol->wolopts & WAKE_MAGIC) {
1351		status = lv1_net_control(bus_id(card), dev_id(card),
1352					 GELIC_LV1_SET_WOL,
1353					 GELIC_LV1_WOL_MAGIC_PACKET,
1354					 0, GELIC_LV1_WOL_MP_ENABLE,
1355					 &v1, &v2);
1356		if (status) {
1357			pr_info("%s: enabling WOL failed %d\n", __func__,
1358				status);
1359			status = -EIO;
1360			goto done;
1361		}
1362		status = lv1_net_control(bus_id(card), dev_id(card),
1363					 GELIC_LV1_SET_WOL,
1364					 GELIC_LV1_WOL_ADD_MATCH_ADDR,
1365					 0, GELIC_LV1_WOL_MATCH_ALL,
1366					 &v1, &v2);
1367		if (!status)
1368			ps3_sys_manager_set_wol(1);
1369		else {
1370			pr_info("%s: enabling WOL filter failed %d\n",
1371				__func__, status);
1372			status = -EIO;
1373		}
1374	} else {
1375		status = lv1_net_control(bus_id(card), dev_id(card),
1376					 GELIC_LV1_SET_WOL,
1377					 GELIC_LV1_WOL_MAGIC_PACKET,
1378					 0, GELIC_LV1_WOL_MP_DISABLE,
1379					 &v1, &v2);
1380		if (status) {
1381			pr_info("%s: disabling WOL failed %d\n", __func__,
1382				status);
1383			status = -EIO;
1384			goto done;
1385		}
1386		status = lv1_net_control(bus_id(card), dev_id(card),
1387					 GELIC_LV1_SET_WOL,
1388					 GELIC_LV1_WOL_DELETE_MATCH_ADDR,
1389					 0, GELIC_LV1_WOL_MATCH_ALL,
1390					 &v1, &v2);
1391		if (!status)
1392			ps3_sys_manager_set_wol(0);
1393		else {
1394			pr_info("%s: removing WOL filter failed %d\n",
1395				__func__, status);
1396			status = -EIO;
1397		}
1398	}
1399done:
1400	return status;
1401}
1402
1403static const struct ethtool_ops gelic_ether_ethtool_ops = {
1404	.get_drvinfo	= gelic_net_get_drvinfo,
1405	.get_link	= ethtool_op_get_link,
1406	.get_wol	= gelic_net_get_wol,
1407	.set_wol	= gelic_net_set_wol,
1408	.get_link_ksettings = gelic_ether_get_link_ksettings,
1409	.set_link_ksettings = gelic_ether_set_link_ksettings,
1410};
1411
1412/**
1413 * gelic_net_tx_timeout_task - task scheduled by the watchdog timeout
1414 * function (to be called not under interrupt status)
1415 * @work: work is context of tx timout task
1416 *
1417 * called as task when tx hangs, resets interface (if interface is up)
1418 */
1419static void gelic_net_tx_timeout_task(struct work_struct *work)
1420{
1421	struct gelic_card *card =
1422		container_of(work, struct gelic_card, tx_timeout_task);
1423	struct net_device *netdev = card->netdev[GELIC_PORT_ETHERNET_0];
1424
1425	dev_info(ctodev(card), "%s:Timed out. Restarting...\n", __func__);
1426
1427	if (!(netdev->flags & IFF_UP))
1428		goto out;
1429
1430	netif_device_detach(netdev);
1431	gelic_net_stop(netdev);
1432
1433	gelic_net_open(netdev);
1434	netif_device_attach(netdev);
1435
1436out:
1437	atomic_dec(&card->tx_timeout_task_counter);
1438}
1439
1440/**
1441 * gelic_net_tx_timeout - called when the tx timeout watchdog kicks in.
1442 * @netdev: interface device structure
1443 * @txqueue: unused
1444 *
1445 * called, if tx hangs. Schedules a task that resets the interface
1446 */
1447void gelic_net_tx_timeout(struct net_device *netdev, unsigned int txqueue)
1448{
1449	struct gelic_card *card;
1450
1451	card = netdev_card(netdev);
1452	atomic_inc(&card->tx_timeout_task_counter);
1453	if (netdev->flags & IFF_UP)
1454		schedule_work(&card->tx_timeout_task);
1455	else
1456		atomic_dec(&card->tx_timeout_task_counter);
1457}
1458
1459static const struct net_device_ops gelic_netdevice_ops = {
1460	.ndo_open = gelic_net_open,
1461	.ndo_stop = gelic_net_stop,
1462	.ndo_start_xmit = gelic_net_xmit,
1463	.ndo_set_rx_mode = gelic_net_set_multi,
1464	.ndo_tx_timeout = gelic_net_tx_timeout,
1465	.ndo_set_mac_address = eth_mac_addr,
1466	.ndo_validate_addr = eth_validate_addr,
1467#ifdef CONFIG_NET_POLL_CONTROLLER
1468	.ndo_poll_controller = gelic_net_poll_controller,
1469#endif
1470};
1471
1472/**
1473 * gelic_ether_setup_netdev_ops - initialization of net_device operations
1474 * @netdev: net_device structure
1475 * @napi: napi structure
1476 *
1477 * fills out function pointers in the net_device structure
1478 */
1479static void gelic_ether_setup_netdev_ops(struct net_device *netdev,
1480					 struct napi_struct *napi)
1481{
1482	netdev->watchdog_timeo = GELIC_NET_WATCHDOG_TIMEOUT;
1483	/* NAPI */
1484	netif_napi_add(netdev, napi, gelic_net_poll);
1485	netdev->ethtool_ops = &gelic_ether_ethtool_ops;
1486	netdev->netdev_ops = &gelic_netdevice_ops;
1487}
1488
1489/**
1490 * gelic_net_setup_netdev - initialization of net_device
1491 * @netdev: net_device structure
1492 * @card: card structure
1493 *
1494 * Returns 0 on success or <0 on failure
1495 *
1496 * gelic_ether_setup_netdev initializes the net_device structure
1497 * and register it.
1498 **/
1499int gelic_net_setup_netdev(struct net_device *netdev, struct gelic_card *card)
1500{
1501	int status;
1502	u64 v1, v2;
1503
1504	netdev->hw_features = NETIF_F_IP_CSUM | NETIF_F_RXCSUM;
1505
1506	netdev->features = NETIF_F_IP_CSUM;
1507	if (GELIC_CARD_RX_CSUM_DEFAULT)
1508		netdev->features |= NETIF_F_RXCSUM;
1509
1510	status = lv1_net_control(bus_id(card), dev_id(card),
1511				 GELIC_LV1_GET_MAC_ADDRESS,
1512				 0, 0, 0, &v1, &v2);
1513	v1 <<= 16;
1514	if (status || !is_valid_ether_addr((u8 *)&v1)) {
1515		dev_info(ctodev(card),
1516			 "%s:lv1_net_control GET_MAC_ADDR failed %d\n",
1517			 __func__, status);
1518		return -EINVAL;
1519	}
1520	eth_hw_addr_set(netdev, (u8 *)&v1);
1521
1522	if (card->vlan_required) {
1523		netdev->hard_header_len += VLAN_HLEN;
1524		/*
1525		 * As vlan is internally used,
1526		 * we can not receive vlan packets
1527		 */
1528		netdev->features |= NETIF_F_VLAN_CHALLENGED;
1529	}
1530
1531	/* MTU range: 64 - 1518 */
1532	netdev->min_mtu = GELIC_NET_MIN_MTU;
1533	netdev->max_mtu = GELIC_NET_MAX_MTU;
1534
1535	status = register_netdev(netdev);
1536	if (status) {
1537		dev_err(ctodev(card), "%s:Couldn't register %s %d\n",
1538			__func__, netdev->name, status);
1539		return status;
1540	}
1541	dev_info(ctodev(card), "%s: MAC addr %pM\n",
1542		 netdev->name, netdev->dev_addr);
1543
1544	return 0;
1545}
1546
1547#define GELIC_ALIGN (32)
1548
1549/**
1550 * gelic_alloc_card_net - allocates net_device and card structure
1551 * @netdev: interface device structure
1552 *
1553 * returns the card structure or NULL in case of errors
1554 *
1555 * the card and net_device structures are linked to each other
1556 */
1557static struct gelic_card *gelic_alloc_card_net(struct net_device **netdev)
1558{
1559	struct gelic_card *card;
1560	struct gelic_port *port;
1561	void *p;
1562	size_t alloc_size;
1563	/*
1564	 * gelic requires dma descriptor is 32 bytes aligned and
1565	 * the hypervisor requires irq_status is 8 bytes aligned.
1566	 */
1567	BUILD_BUG_ON(offsetof(struct gelic_card, irq_status) % 8);
1568	BUILD_BUG_ON(offsetof(struct gelic_card, descr) % 32);
1569	alloc_size =
1570		sizeof(struct gelic_card) +
1571		sizeof(struct gelic_descr) * GELIC_NET_RX_DESCRIPTORS +
1572		sizeof(struct gelic_descr) * GELIC_NET_TX_DESCRIPTORS +
1573		GELIC_ALIGN - 1;
1574
1575	p  = kzalloc(alloc_size, GFP_KERNEL);
1576	if (!p)
1577		return NULL;
1578	card = PTR_ALIGN(p, GELIC_ALIGN);
1579	card->unalign = p;
1580
1581	/*
1582	 * alloc netdev
1583	 */
1584	*netdev = alloc_etherdev(sizeof(struct gelic_port));
1585	if (!*netdev) {
1586		kfree(card->unalign);
1587		return NULL;
1588	}
1589	port = netdev_priv(*netdev);
1590
1591	/* gelic_port */
1592	port->netdev = *netdev;
1593	port->card = card;
1594	port->type = GELIC_PORT_ETHERNET_0;
1595
1596	/* gelic_card */
1597	card->netdev[GELIC_PORT_ETHERNET_0] = *netdev;
1598
1599	INIT_WORK(&card->tx_timeout_task, gelic_net_tx_timeout_task);
1600	init_waitqueue_head(&card->waitq);
1601	atomic_set(&card->tx_timeout_task_counter, 0);
1602	mutex_init(&card->updown_lock);
1603	atomic_set(&card->users, 0);
1604
1605	timer_setup(&card->rx_oom_timer, gelic_rx_oom_timer, 0);
1606
1607	return card;
1608}
1609
1610static void gelic_card_get_vlan_info(struct gelic_card *card)
1611{
1612	u64 v1, v2;
1613	int status;
1614	unsigned int i;
1615	struct {
1616		int tx;
1617		int rx;
1618	} vlan_id_ix[2] = {
1619		[GELIC_PORT_ETHERNET_0] = {
1620			.tx = GELIC_LV1_VLAN_TX_ETHERNET_0,
1621			.rx = GELIC_LV1_VLAN_RX_ETHERNET_0
1622		},
1623		[GELIC_PORT_WIRELESS] = {
1624			.tx = GELIC_LV1_VLAN_TX_WIRELESS,
1625			.rx = GELIC_LV1_VLAN_RX_WIRELESS
1626		}
1627	};
1628
1629	for (i = 0; i < ARRAY_SIZE(vlan_id_ix); i++) {
1630		/* tx tag */
1631		status = lv1_net_control(bus_id(card), dev_id(card),
1632					 GELIC_LV1_GET_VLAN_ID,
1633					 vlan_id_ix[i].tx,
1634					 0, 0, &v1, &v2);
1635		if (status || !v1) {
1636			if (status != LV1_NO_ENTRY)
1637				dev_dbg(ctodev(card),
1638					"get vlan id for tx(%d) failed(%d)\n",
1639					vlan_id_ix[i].tx, status);
1640			card->vlan[i].tx = 0;
1641			card->vlan[i].rx = 0;
1642			continue;
1643		}
1644		card->vlan[i].tx = (u16)v1;
1645
1646		/* rx tag */
1647		status = lv1_net_control(bus_id(card), dev_id(card),
1648					 GELIC_LV1_GET_VLAN_ID,
1649					 vlan_id_ix[i].rx,
1650					 0, 0, &v1, &v2);
1651		if (status || !v1) {
1652			if (status != LV1_NO_ENTRY)
1653				dev_info(ctodev(card),
1654					 "get vlan id for rx(%d) failed(%d)\n",
1655					 vlan_id_ix[i].rx, status);
1656			card->vlan[i].tx = 0;
1657			card->vlan[i].rx = 0;
1658			continue;
1659		}
1660		card->vlan[i].rx = (u16)v1;
1661
1662		dev_dbg(ctodev(card), "vlan_id[%d] tx=%02x rx=%02x\n",
1663			i, card->vlan[i].tx, card->vlan[i].rx);
1664	}
1665
1666	if (card->vlan[GELIC_PORT_ETHERNET_0].tx) {
1667		BUG_ON(!card->vlan[GELIC_PORT_WIRELESS].tx);
1668		card->vlan_required = 1;
1669	} else
1670		card->vlan_required = 0;
1671
1672	/* check wirelss capable firmware */
1673	if (ps3_compare_firmware_version(1, 6, 0) < 0) {
1674		card->vlan[GELIC_PORT_WIRELESS].tx = 0;
1675		card->vlan[GELIC_PORT_WIRELESS].rx = 0;
1676	}
1677
1678	dev_info(ctodev(card), "internal vlan %s\n",
1679		 card->vlan_required? "enabled" : "disabled");
1680}
1681/*
1682 * ps3_gelic_driver_probe - add a device to the control of this driver
1683 */
1684static int ps3_gelic_driver_probe(struct ps3_system_bus_device *dev)
1685{
1686	struct gelic_card *card;
1687	struct net_device *netdev;
1688	int result;
1689
1690	pr_debug("%s: called\n", __func__);
1691
1692	udbg_shutdown_ps3gelic();
1693
1694	result = ps3_open_hv_device(dev);
1695
1696	if (result) {
1697		dev_dbg(&dev->core, "%s:ps3_open_hv_device failed\n",
1698			__func__);
1699		goto fail_open;
1700	}
1701
1702	result = ps3_dma_region_create(dev->d_region);
1703
1704	if (result) {
1705		dev_dbg(&dev->core, "%s:ps3_dma_region_create failed(%d)\n",
1706			__func__, result);
1707		BUG_ON("check region type");
1708		goto fail_dma_region;
1709	}
1710
1711	/* alloc card/netdevice */
1712	card = gelic_alloc_card_net(&netdev);
1713	if (!card) {
1714		dev_info(&dev->core, "%s:gelic_net_alloc_card failed\n",
1715			 __func__);
1716		result = -ENOMEM;
1717		goto fail_alloc_card;
1718	}
1719	ps3_system_bus_set_drvdata(dev, card);
1720	card->dev = dev;
1721
1722	/* get internal vlan info */
1723	gelic_card_get_vlan_info(card);
1724
1725	card->link_mode = GELIC_LV1_ETHER_AUTO_NEG;
1726
1727	/* setup interrupt */
1728	result = lv1_net_set_interrupt_status_indicator(bus_id(card),
1729							dev_id(card),
1730		ps3_mm_phys_to_lpar(__pa(&card->irq_status)),
1731		0);
1732
1733	if (result) {
1734		dev_dbg(&dev->core,
1735			"%s:set_interrupt_status_indicator failed: %s\n",
1736			__func__, ps3_result(result));
1737		result = -EIO;
1738		goto fail_status_indicator;
1739	}
1740
1741	result = ps3_sb_event_receive_port_setup(dev, PS3_BINDING_CPU_ANY,
1742		&card->irq);
1743
1744	if (result) {
1745		dev_info(ctodev(card),
1746			 "%s:gelic_net_open_device failed (%d)\n",
1747			 __func__, result);
1748		result = -EPERM;
1749		goto fail_alloc_irq;
1750	}
1751	result = request_irq(card->irq, gelic_card_interrupt,
1752			     0, netdev->name, card);
1753
1754	if (result) {
1755		dev_info(ctodev(card), "%s:request_irq failed (%d)\n",
1756			__func__, result);
1757		goto fail_request_irq;
1758	}
1759
1760	/* setup card structure */
1761	card->irq_mask = GELIC_CARD_RXINT | GELIC_CARD_TXINT |
1762		GELIC_CARD_PORT_STATUS_CHANGED;
1763
1764
1765	result = gelic_card_init_chain(card, &card->tx_chain,
1766				       card->descr, GELIC_NET_TX_DESCRIPTORS);
1767	if (result)
1768		goto fail_alloc_tx;
1769	result = gelic_card_init_chain(card, &card->rx_chain,
1770				       card->descr + GELIC_NET_TX_DESCRIPTORS,
1771				       GELIC_NET_RX_DESCRIPTORS);
1772	if (result)
1773		goto fail_alloc_rx;
1774
1775	/* head of chain */
1776	card->tx_top = card->tx_chain.head;
1777	card->rx_top = card->rx_chain.head;
1778	dev_dbg(ctodev(card), "descr rx %p, tx %p, size %#lx, num %#x\n",
1779		card->rx_top, card->tx_top, sizeof(struct gelic_descr),
1780		GELIC_NET_RX_DESCRIPTORS);
1781	/* allocate rx skbs */
1782	result = gelic_card_alloc_rx_skbs(card);
1783	if (result)
1784		goto fail_alloc_skbs;
1785
1786	spin_lock_init(&card->tx_lock);
1787	card->tx_dma_progress = 0;
1788
1789	/* setup net_device structure */
1790	netdev->irq = card->irq;
1791	SET_NETDEV_DEV(netdev, &card->dev->core);
1792	gelic_ether_setup_netdev_ops(netdev, &card->napi);
1793	result = gelic_net_setup_netdev(netdev, card);
1794	if (result) {
1795		dev_dbg(&dev->core, "%s: setup_netdev failed %d\n",
1796			__func__, result);
1797		goto fail_setup_netdev;
1798	}
1799
1800#ifdef CONFIG_GELIC_WIRELESS
1801	result = gelic_wl_driver_probe(card);
1802	if (result) {
1803		dev_dbg(&dev->core, "%s: WL init failed\n", __func__);
1804		goto fail_setup_netdev;
1805	}
1806#endif
1807	pr_debug("%s: done\n", __func__);
1808	return 0;
1809
1810fail_setup_netdev:
1811fail_alloc_skbs:
1812	gelic_card_free_chain(card, card->rx_chain.head);
1813fail_alloc_rx:
1814	gelic_card_free_chain(card, card->tx_chain.head);
1815fail_alloc_tx:
1816	free_irq(card->irq, card);
1817	netdev->irq = 0;
1818fail_request_irq:
1819	ps3_sb_event_receive_port_destroy(dev, card->irq);
1820fail_alloc_irq:
1821	lv1_net_set_interrupt_status_indicator(bus_id(card),
1822					       bus_id(card),
1823					       0, 0);
1824fail_status_indicator:
1825	ps3_system_bus_set_drvdata(dev, NULL);
1826	kfree(netdev_card(netdev)->unalign);
1827	free_netdev(netdev);
1828fail_alloc_card:
1829	ps3_dma_region_free(dev->d_region);
1830fail_dma_region:
1831	ps3_close_hv_device(dev);
1832fail_open:
1833	return result;
1834}
1835
1836/*
1837 * ps3_gelic_driver_remove - remove a device from the control of this driver
1838 */
1839
1840static void ps3_gelic_driver_remove(struct ps3_system_bus_device *dev)
1841{
1842	struct gelic_card *card = ps3_system_bus_get_drvdata(dev);
1843	struct net_device *netdev0;
1844	pr_debug("%s: called\n", __func__);
1845
1846	/* set auto-negotiation */
1847	gelic_card_set_link_mode(card, GELIC_LV1_ETHER_AUTO_NEG);
1848
1849#ifdef CONFIG_GELIC_WIRELESS
1850	gelic_wl_driver_remove(card);
1851#endif
1852	/* stop interrupt */
1853	gelic_card_set_irq_mask(card, 0);
1854
1855	/* turn off DMA, force end */
1856	gelic_card_disable_rxdmac(card);
1857	gelic_card_disable_txdmac(card);
1858
1859	/* release chains */
1860	gelic_card_release_tx_chain(card, 1);
1861	gelic_card_release_rx_chain(card);
1862
1863	gelic_card_free_chain(card, card->tx_top);
1864	gelic_card_free_chain(card, card->rx_top);
1865
1866	netdev0 = card->netdev[GELIC_PORT_ETHERNET_0];
1867	/* disconnect event port */
1868	free_irq(card->irq, card);
1869	netdev0->irq = 0;
1870	ps3_sb_event_receive_port_destroy(card->dev, card->irq);
1871
1872	wait_event(card->waitq,
1873		   atomic_read(&card->tx_timeout_task_counter) == 0);
1874
1875	lv1_net_set_interrupt_status_indicator(bus_id(card), dev_id(card),
1876					       0 , 0);
1877
1878	unregister_netdev(netdev0);
1879	kfree(netdev_card(netdev0)->unalign);
1880	free_netdev(netdev0);
1881
1882	ps3_system_bus_set_drvdata(dev, NULL);
1883
1884	ps3_dma_region_free(dev->d_region);
1885
1886	ps3_close_hv_device(dev);
1887
1888	pr_debug("%s: done\n", __func__);
1889}
1890
1891static struct ps3_system_bus_driver ps3_gelic_driver = {
1892	.match_id = PS3_MATCH_ID_GELIC,
1893	.probe = ps3_gelic_driver_probe,
1894	.remove = ps3_gelic_driver_remove,
1895	.shutdown = ps3_gelic_driver_remove,
1896	.core.name = "ps3_gelic_driver",
1897	.core.owner = THIS_MODULE,
1898};
1899
1900static int __init ps3_gelic_driver_init (void)
1901{
1902	return firmware_has_feature(FW_FEATURE_PS3_LV1)
1903		? ps3_system_bus_driver_register(&ps3_gelic_driver)
1904		: -ENODEV;
1905}
1906
1907static void __exit ps3_gelic_driver_exit (void)
1908{
1909	ps3_system_bus_driver_unregister(&ps3_gelic_driver);
1910}
1911
1912module_init(ps3_gelic_driver_init);
1913module_exit(ps3_gelic_driver_exit);
1914
1915MODULE_ALIAS(PS3_MODULE_ALIAS_GELIC);
1916
~/ Read-only file preview.