File Index
Files and directories
Sign in
FILE

bh1770glc.c

File preview with syntax highlighting.

linux-6.19.14/drivers/misc/bh1770glc.c C
   1// SPDX-License-Identifier: GPL-2.0-only
   2/*
   3 * This file is part of the ROHM BH1770GLC / OSRAM SFH7770 sensor driver.
   4 * Chip is combined proximity and ambient light sensor.
   5 *
   6 * Copyright (C) 2010 Nokia Corporation and/or its subsidiary(-ies).
   7 *
   8 * Contact: Samu Onkalo <samu.p.onkalo@nokia.com>
   9 */
  10
  11#include <linux/kernel.h>
  12#include <linux/module.h>
  13#include <linux/i2c.h>
  14#include <linux/interrupt.h>
  15#include <linux/mutex.h>
  16#include <linux/platform_data/bh1770glc.h>
  17#include <linux/regulator/consumer.h>
  18#include <linux/pm_runtime.h>
  19#include <linux/workqueue.h>
  20#include <linux/delay.h>
  21#include <linux/wait.h>
  22#include <linux/slab.h>
  23
  24#define BH1770_ALS_CONTROL	0x80 /* ALS operation mode control */
  25#define BH1770_PS_CONTROL	0x81 /* PS operation mode control */
  26#define BH1770_I_LED		0x82 /* active LED and LED1, LED2 current */
  27#define BH1770_I_LED3		0x83 /* LED3 current setting */
  28#define BH1770_ALS_PS_MEAS	0x84 /* Forced mode trigger */
  29#define BH1770_PS_MEAS_RATE	0x85 /* PS meas. rate at stand alone mode */
  30#define BH1770_ALS_MEAS_RATE	0x86 /* ALS meas. rate at stand alone mode */
  31#define BH1770_PART_ID		0x8a /* Part number and revision ID */
  32#define BH1770_MANUFACT_ID	0x8b /* Manufacturerer ID */
  33#define BH1770_ALS_DATA_0	0x8c /* ALS DATA low byte */
  34#define BH1770_ALS_DATA_1	0x8d /* ALS DATA high byte */
  35#define BH1770_ALS_PS_STATUS	0x8e /* Measurement data and int status */
  36#define BH1770_PS_DATA_LED1	0x8f /* PS data from LED1 */
  37#define BH1770_PS_DATA_LED2	0x90 /* PS data from LED2 */
  38#define BH1770_PS_DATA_LED3	0x91 /* PS data from LED3 */
  39#define BH1770_INTERRUPT	0x92 /* Interrupt setting */
  40#define BH1770_PS_TH_LED1	0x93 /* PS interrupt threshold for LED1 */
  41#define BH1770_PS_TH_LED2	0x94 /* PS interrupt threshold for LED2 */
  42#define BH1770_PS_TH_LED3	0x95 /* PS interrupt threshold for LED3 */
  43#define BH1770_ALS_TH_UP_0	0x96 /* ALS upper threshold low byte */
  44#define BH1770_ALS_TH_UP_1	0x97 /* ALS upper threshold high byte */
  45#define BH1770_ALS_TH_LOW_0	0x98 /* ALS lower threshold low byte */
  46#define BH1770_ALS_TH_LOW_1	0x99 /* ALS lower threshold high byte */
  47
  48/* MANUFACT_ID */
  49#define BH1770_MANUFACT_ROHM	0x01
  50#define BH1770_MANUFACT_OSRAM	0x03
  51
  52/* PART_ID */
  53#define BH1770_PART		0x90
  54#define BH1770_PART_MASK	0xf0
  55#define BH1770_REV_MASK		0x0f
  56#define BH1770_REV_SHIFT	0
  57#define BH1770_REV_0		0x00
  58#define BH1770_REV_1		0x01
  59
  60/* Operating modes for both */
  61#define BH1770_STANDBY		0x00
  62#define BH1770_FORCED		0x02
  63#define BH1770_STANDALONE	0x03
  64#define BH1770_SWRESET		(0x01 << 2)
  65
  66#define BH1770_PS_TRIG_MEAS	(1 << 0)
  67#define BH1770_ALS_TRIG_MEAS	(1 << 1)
  68
  69/* Interrupt control */
  70#define BH1770_INT_OUTPUT_MODE	(1 << 3) /* 0 = latched */
  71#define BH1770_INT_POLARITY	(1 << 2) /* 1 = active high */
  72#define BH1770_INT_ALS_ENA	(1 << 1)
  73#define BH1770_INT_PS_ENA	(1 << 0)
  74
  75/* Interrupt status */
  76#define BH1770_INT_LED1_DATA	(1 << 0)
  77#define BH1770_INT_LED1_INT	(1 << 1)
  78#define BH1770_INT_LED2_DATA	(1 << 2)
  79#define BH1770_INT_LED2_INT	(1 << 3)
  80#define BH1770_INT_LED3_DATA	(1 << 4)
  81#define BH1770_INT_LED3_INT	(1 << 5)
  82#define BH1770_INT_LEDS_INT	((1 << 1) | (1 << 3) | (1 << 5))
  83#define BH1770_INT_ALS_DATA	(1 << 6)
  84#define BH1770_INT_ALS_INT	(1 << 7)
  85
  86/* Led channels */
  87#define BH1770_LED1		0x00
  88
  89#define BH1770_DISABLE		0
  90#define BH1770_ENABLE		1
  91#define BH1770_PROX_CHANNELS	1
  92
  93#define BH1770_LUX_DEFAULT_RATE	1 /* Index to lux rate table */
  94#define BH1770_PROX_DEFAULT_RATE 1 /* Direct HW value =~ 50Hz */
  95#define BH1770_PROX_DEF_RATE_THRESH 6 /* Direct HW value =~ 5 Hz */
  96#define BH1770_STARTUP_DELAY	50
  97#define BH1770_RESET_TIME	10
  98#define BH1770_TIMEOUT		2100 /* Timeout in 2.1 seconds */
  99
 100#define BH1770_LUX_RANGE	65535
 101#define BH1770_PROX_RANGE	255
 102#define BH1770_COEF_SCALER	1024
 103#define BH1770_CALIB_SCALER	8192
 104#define BH1770_LUX_NEUTRAL_CALIB_VALUE (1 * BH1770_CALIB_SCALER)
 105#define BH1770_LUX_DEF_THRES	1000
 106#define BH1770_PROX_DEF_THRES	70
 107#define BH1770_PROX_DEF_ABS_THRES   100
 108#define BH1770_DEFAULT_PERSISTENCE  10
 109#define BH1770_PROX_MAX_PERSISTENCE 50
 110#define BH1770_LUX_GA_SCALE	16384
 111#define BH1770_LUX_CF_SCALE	2048 /* CF ChipFactor */
 112#define BH1770_NEUTRAL_CF	BH1770_LUX_CF_SCALE
 113#define BH1770_LUX_CORR_SCALE	4096
 114
 115#define PROX_ABOVE_THRESHOLD	1
 116#define PROX_BELOW_THRESHOLD	0
 117
 118#define PROX_IGNORE_LUX_LIMIT	500
 119
 120struct bh1770_chip {
 121	struct bh1770_platform_data	*pdata;
 122	char				chipname[10];
 123	u8				revision;
 124	struct i2c_client		*client;
 125	struct regulator_bulk_data	regs[2];
 126	struct mutex			mutex; /* avoid parallel access */
 127	wait_queue_head_t		wait;
 128
 129	bool			int_mode_prox;
 130	bool			int_mode_lux;
 131	struct delayed_work	prox_work;
 132	u32	lux_cf; /* Chip specific factor */
 133	u32	lux_ga;
 134	u32	lux_calib;
 135	int	lux_rate_index;
 136	u32	lux_corr;
 137	u16	lux_data_raw;
 138	u16	lux_threshold_hi;
 139	u16	lux_threshold_lo;
 140	u16	lux_thres_hi_onchip;
 141	u16	lux_thres_lo_onchip;
 142	bool	lux_wait_result;
 143
 144	int	prox_enable_count;
 145	u16	prox_coef;
 146	u16	prox_const;
 147	int	prox_rate;
 148	int	prox_rate_threshold;
 149	u8	prox_persistence;
 150	u8	prox_persistence_counter;
 151	u8	prox_data;
 152	u8	prox_threshold;
 153	u8	prox_threshold_hw;
 154	bool	prox_force_update;
 155	u8	prox_abs_thres;
 156	u8	prox_led;
 157};
 158
 159static const char reg_vcc[] = "Vcc";
 160static const char reg_vleds[] = "Vleds";
 161
 162/*
 163 * Supported stand alone rates in ms from chip data sheet
 164 * {10, 20, 30, 40, 70, 100, 200, 500, 1000, 2000};
 165 */
 166static const s16 prox_rates_hz[] = {100, 50, 33, 25, 14, 10, 5, 2};
 167static const s16 prox_rates_ms[] = {10, 20, 30, 40, 70, 100, 200, 500};
 168
 169/*
 170 * Supported stand alone rates in ms from chip data sheet
 171 * {100, 200, 500, 1000, 2000};
 172 */
 173static const s16 lux_rates_hz[] = {10, 5, 2, 1, 0};
 174
 175/*
 176 * interrupt control functions are called while keeping chip->mutex
 177 * excluding module probe / remove
 178 */
 179static inline int bh1770_lux_interrupt_control(struct bh1770_chip *chip,
 180					int lux)
 181{
 182	chip->int_mode_lux = lux;
 183	/* Set interrupt modes, interrupt active low, latched */
 184	return i2c_smbus_write_byte_data(chip->client,
 185					BH1770_INTERRUPT,
 186					(lux << 1) | chip->int_mode_prox);
 187}
 188
 189static inline int bh1770_prox_interrupt_control(struct bh1770_chip *chip,
 190					int ps)
 191{
 192	chip->int_mode_prox = ps;
 193	return i2c_smbus_write_byte_data(chip->client,
 194					BH1770_INTERRUPT,
 195					(chip->int_mode_lux << 1) | (ps << 0));
 196}
 197
 198/* chip->mutex is always kept here */
 199static int bh1770_lux_rate(struct bh1770_chip *chip, int rate_index)
 200{
 201	/* sysfs may call this when the chip is powered off */
 202	if (pm_runtime_suspended(&chip->client->dev))
 203		return 0;
 204
 205	/* Proper proximity response needs fastest lux rate (100ms) */
 206	if (chip->prox_enable_count)
 207		rate_index = 0;
 208
 209	return i2c_smbus_write_byte_data(chip->client,
 210					BH1770_ALS_MEAS_RATE,
 211					rate_index);
 212}
 213
 214static int bh1770_prox_rate(struct bh1770_chip *chip, int mode)
 215{
 216	int rate;
 217
 218	rate = (mode == PROX_ABOVE_THRESHOLD) ?
 219		chip->prox_rate_threshold : chip->prox_rate;
 220
 221	return i2c_smbus_write_byte_data(chip->client,
 222					BH1770_PS_MEAS_RATE,
 223					rate);
 224}
 225
 226/* InfraredLED is controlled by the chip during proximity scanning */
 227static inline int bh1770_led_cfg(struct bh1770_chip *chip)
 228{
 229	/* LED cfg, current for leds 1 and 2 */
 230	return i2c_smbus_write_byte_data(chip->client,
 231					BH1770_I_LED,
 232					(BH1770_LED1 << 6) |
 233					(BH1770_LED_5mA << 3) |
 234					chip->prox_led);
 235}
 236
 237/*
 238 * Following two functions converts raw ps values from HW to normalized
 239 * values. Purpose is to compensate differences between different sensor
 240 * versions and variants so that result means about the same between
 241 * versions.
 242 */
 243static inline u8 bh1770_psraw_to_adjusted(struct bh1770_chip *chip, u8 psraw)
 244{
 245	u16 adjusted;
 246	adjusted = (u16)(((u32)(psraw + chip->prox_const) * chip->prox_coef) /
 247		BH1770_COEF_SCALER);
 248	if (adjusted > BH1770_PROX_RANGE)
 249		adjusted = BH1770_PROX_RANGE;
 250	return adjusted;
 251}
 252
 253static inline u8 bh1770_psadjusted_to_raw(struct bh1770_chip *chip, u8 ps)
 254{
 255	u16 raw;
 256
 257	raw = (((u32)ps * BH1770_COEF_SCALER) / chip->prox_coef);
 258	if (raw > chip->prox_const)
 259		raw = raw - chip->prox_const;
 260	else
 261		raw = 0;
 262	return raw;
 263}
 264
 265/*
 266 * Following two functions converts raw lux values from HW to normalized
 267 * values. Purpose is to compensate differences between different sensor
 268 * versions and variants so that result means about the same between
 269 * versions. Chip->mutex is kept when this is called.
 270 */
 271static int bh1770_prox_set_threshold(struct bh1770_chip *chip)
 272{
 273	u8 tmp = 0;
 274
 275	/* sysfs may call this when the chip is powered off */
 276	if (pm_runtime_suspended(&chip->client->dev))
 277		return 0;
 278
 279	tmp = bh1770_psadjusted_to_raw(chip, chip->prox_threshold);
 280	chip->prox_threshold_hw = tmp;
 281
 282	return	i2c_smbus_write_byte_data(chip->client, BH1770_PS_TH_LED1,
 283					tmp);
 284}
 285
 286static inline u16 bh1770_lux_raw_to_adjusted(struct bh1770_chip *chip, u16 raw)
 287{
 288	u32 lux;
 289	lux = ((u32)raw * chip->lux_corr) / BH1770_LUX_CORR_SCALE;
 290	return min(lux, (u32)BH1770_LUX_RANGE);
 291}
 292
 293static inline u16 bh1770_lux_adjusted_to_raw(struct bh1770_chip *chip,
 294					u16 adjusted)
 295{
 296	return (u32)adjusted * BH1770_LUX_CORR_SCALE / chip->lux_corr;
 297}
 298
 299/* chip->mutex is kept when this is called */
 300static int bh1770_lux_update_thresholds(struct bh1770_chip *chip,
 301					u16 threshold_hi, u16 threshold_lo)
 302{
 303	u8 data[4];
 304	int ret;
 305
 306	/* sysfs may call this when the chip is powered off */
 307	if (pm_runtime_suspended(&chip->client->dev))
 308		return 0;
 309
 310	/*
 311	 * Compensate threshold values with the correction factors if not
 312	 * set to minimum or maximum.
 313	 * Min & max values disables interrupts.
 314	 */
 315	if (threshold_hi != BH1770_LUX_RANGE && threshold_hi != 0)
 316		threshold_hi = bh1770_lux_adjusted_to_raw(chip, threshold_hi);
 317
 318	if (threshold_lo != BH1770_LUX_RANGE && threshold_lo != 0)
 319		threshold_lo = bh1770_lux_adjusted_to_raw(chip, threshold_lo);
 320
 321	if (chip->lux_thres_hi_onchip == threshold_hi &&
 322	    chip->lux_thres_lo_onchip == threshold_lo)
 323		return 0;
 324
 325	chip->lux_thres_hi_onchip = threshold_hi;
 326	chip->lux_thres_lo_onchip = threshold_lo;
 327
 328	data[0] = threshold_hi;
 329	data[1] = threshold_hi >> 8;
 330	data[2] = threshold_lo;
 331	data[3] = threshold_lo >> 8;
 332
 333	ret = i2c_smbus_write_i2c_block_data(chip->client,
 334					BH1770_ALS_TH_UP_0,
 335					ARRAY_SIZE(data),
 336					data);
 337	return ret;
 338}
 339
 340static int bh1770_lux_get_result(struct bh1770_chip *chip)
 341{
 342	u16 data;
 343	int ret;
 344
 345	ret = i2c_smbus_read_byte_data(chip->client, BH1770_ALS_DATA_0);
 346	if (ret < 0)
 347		return ret;
 348
 349	data = ret & 0xff;
 350	ret = i2c_smbus_read_byte_data(chip->client, BH1770_ALS_DATA_1);
 351	if (ret < 0)
 352		return ret;
 353
 354	chip->lux_data_raw = data | ((ret & 0xff) << 8);
 355
 356	return 0;
 357}
 358
 359/* Calculate correction value which contains chip and device specific parts */
 360static u32 bh1770_get_corr_value(struct bh1770_chip *chip)
 361{
 362	u32 tmp;
 363	/* Impact of glass attenuation correction */
 364	tmp = (BH1770_LUX_CORR_SCALE * chip->lux_ga) / BH1770_LUX_GA_SCALE;
 365	/* Impact of chip factor correction */
 366	tmp = (tmp * chip->lux_cf) / BH1770_LUX_CF_SCALE;
 367	/* Impact of Device specific calibration correction */
 368	tmp = (tmp * chip->lux_calib) / BH1770_CALIB_SCALER;
 369	return tmp;
 370}
 371
 372static int bh1770_lux_read_result(struct bh1770_chip *chip)
 373{
 374	bh1770_lux_get_result(chip);
 375	return bh1770_lux_raw_to_adjusted(chip, chip->lux_data_raw);
 376}
 377
 378/*
 379 * Chip on / off functions are called while keeping mutex except probe
 380 * or remove phase
 381 */
 382static int bh1770_chip_on(struct bh1770_chip *chip)
 383{
 384	int ret = regulator_bulk_enable(ARRAY_SIZE(chip->regs),
 385					chip->regs);
 386	if (ret < 0)
 387		return ret;
 388
 389	usleep_range(BH1770_STARTUP_DELAY, BH1770_STARTUP_DELAY * 2);
 390
 391	/* Reset the chip */
 392	i2c_smbus_write_byte_data(chip->client, BH1770_ALS_CONTROL,
 393				BH1770_SWRESET);
 394	usleep_range(BH1770_RESET_TIME, BH1770_RESET_TIME * 2);
 395
 396	/*
 397	 * ALS is started always since proximity needs als results
 398	 * for realibility estimation.
 399	 * Let's assume dark until the first ALS measurement is ready.
 400	 */
 401	chip->lux_data_raw = 0;
 402	chip->prox_data = 0;
 403	ret = i2c_smbus_write_byte_data(chip->client,
 404					BH1770_ALS_CONTROL, BH1770_STANDALONE);
 405
 406	/* Assume reset defaults */
 407	chip->lux_thres_hi_onchip = BH1770_LUX_RANGE;
 408	chip->lux_thres_lo_onchip = 0;
 409
 410	return ret;
 411}
 412
 413static void bh1770_chip_off(struct bh1770_chip *chip)
 414{
 415	i2c_smbus_write_byte_data(chip->client,
 416					BH1770_INTERRUPT, BH1770_DISABLE);
 417	i2c_smbus_write_byte_data(chip->client,
 418				BH1770_ALS_CONTROL, BH1770_STANDBY);
 419	i2c_smbus_write_byte_data(chip->client,
 420				BH1770_PS_CONTROL, BH1770_STANDBY);
 421	regulator_bulk_disable(ARRAY_SIZE(chip->regs), chip->regs);
 422}
 423
 424/* chip->mutex is kept when this is called */
 425static int bh1770_prox_mode_control(struct bh1770_chip *chip)
 426{
 427	if (chip->prox_enable_count) {
 428		chip->prox_force_update = true; /* Force immediate update */
 429
 430		bh1770_lux_rate(chip, chip->lux_rate_index);
 431		bh1770_prox_set_threshold(chip);
 432		bh1770_led_cfg(chip);
 433		bh1770_prox_rate(chip, PROX_BELOW_THRESHOLD);
 434		bh1770_prox_interrupt_control(chip, BH1770_ENABLE);
 435		i2c_smbus_write_byte_data(chip->client,
 436					BH1770_PS_CONTROL, BH1770_STANDALONE);
 437	} else {
 438		chip->prox_data = 0;
 439		bh1770_lux_rate(chip, chip->lux_rate_index);
 440		bh1770_prox_interrupt_control(chip, BH1770_DISABLE);
 441		i2c_smbus_write_byte_data(chip->client,
 442					BH1770_PS_CONTROL, BH1770_STANDBY);
 443	}
 444	return 0;
 445}
 446
 447/* chip->mutex is kept when this is called */
 448static int bh1770_prox_read_result(struct bh1770_chip *chip)
 449{
 450	int ret;
 451	bool above;
 452	u8 mode;
 453
 454	ret = i2c_smbus_read_byte_data(chip->client, BH1770_PS_DATA_LED1);
 455	if (ret < 0)
 456		goto out;
 457
 458	if (ret > chip->prox_threshold_hw)
 459		above = true;
 460	else
 461		above = false;
 462
 463	/*
 464	 * when ALS levels goes above limit, proximity result may be
 465	 * false proximity. Thus ignore the result. With real proximity
 466	 * there is a shadow causing low als levels.
 467	 */
 468	if (chip->lux_data_raw > PROX_IGNORE_LUX_LIMIT)
 469		ret = 0;
 470
 471	chip->prox_data = bh1770_psraw_to_adjusted(chip, ret);
 472
 473	/* Strong proximity level or force mode requires immediate response */
 474	if (chip->prox_data >= chip->prox_abs_thres ||
 475	    chip->prox_force_update)
 476		chip->prox_persistence_counter = chip->prox_persistence;
 477
 478	chip->prox_force_update = false;
 479
 480	/* Persistence filttering to reduce false proximity events */
 481	if (likely(above)) {
 482		if (chip->prox_persistence_counter < chip->prox_persistence) {
 483			chip->prox_persistence_counter++;
 484			ret = -ENODATA;
 485		} else {
 486			mode = PROX_ABOVE_THRESHOLD;
 487			ret = 0;
 488		}
 489	} else {
 490		chip->prox_persistence_counter = 0;
 491		mode = PROX_BELOW_THRESHOLD;
 492		chip->prox_data = 0;
 493		ret = 0;
 494	}
 495
 496	/* Set proximity detection rate based on above or below value */
 497	if (ret == 0) {
 498		bh1770_prox_rate(chip, mode);
 499		sysfs_notify(&chip->client->dev.kobj, NULL, "prox0_raw");
 500	}
 501out:
 502	return ret;
 503}
 504
 505static int bh1770_detect(struct bh1770_chip *chip)
 506{
 507	struct i2c_client *client = chip->client;
 508	s32 ret;
 509	u8 manu, part;
 510
 511	ret = i2c_smbus_read_byte_data(client, BH1770_MANUFACT_ID);
 512	if (ret < 0)
 513		goto error;
 514	manu = (u8)ret;
 515
 516	ret = i2c_smbus_read_byte_data(client, BH1770_PART_ID);
 517	if (ret < 0)
 518		goto error;
 519	part = (u8)ret;
 520
 521	chip->revision = (part & BH1770_REV_MASK) >> BH1770_REV_SHIFT;
 522	chip->prox_coef = BH1770_COEF_SCALER;
 523	chip->prox_const = 0;
 524	chip->lux_cf = BH1770_NEUTRAL_CF;
 525
 526	if ((manu == BH1770_MANUFACT_ROHM) &&
 527	    ((part & BH1770_PART_MASK) == BH1770_PART)) {
 528		snprintf(chip->chipname, sizeof(chip->chipname), "BH1770GLC");
 529		return 0;
 530	}
 531
 532	if ((manu == BH1770_MANUFACT_OSRAM) &&
 533	    ((part & BH1770_PART_MASK) == BH1770_PART)) {
 534		snprintf(chip->chipname, sizeof(chip->chipname), "SFH7770");
 535		/* Values selected by comparing different versions */
 536		chip->prox_coef = 819; /* 0.8 * BH1770_COEF_SCALER */
 537		chip->prox_const = 40;
 538		return 0;
 539	}
 540
 541	ret = -ENODEV;
 542error:
 543	dev_dbg(&client->dev, "BH1770 or SFH7770 not found\n");
 544
 545	return ret;
 546}
 547
 548/*
 549 * This work is re-scheduled at every proximity interrupt.
 550 * If this work is running, it means that there hasn't been any
 551 * proximity interrupt in time. Situation is handled as no-proximity.
 552 * It would be nice to have low-threshold interrupt or interrupt
 553 * when measurement and hi-threshold are both 0. But neither of those exists.
 554 * This is a workaroud for missing HW feature.
 555 */
 556
 557static void bh1770_prox_work(struct work_struct *work)
 558{
 559	struct bh1770_chip *chip =
 560		container_of(work, struct bh1770_chip, prox_work.work);
 561
 562	mutex_lock(&chip->mutex);
 563	bh1770_prox_read_result(chip);
 564	mutex_unlock(&chip->mutex);
 565}
 566
 567/* This is threaded irq handler */
 568static irqreturn_t bh1770_irq(int irq, void *data)
 569{
 570	struct bh1770_chip *chip = data;
 571	int status;
 572	int rate = 0;
 573
 574	mutex_lock(&chip->mutex);
 575	status = i2c_smbus_read_byte_data(chip->client, BH1770_ALS_PS_STATUS);
 576
 577	/* Acknowledge interrupt by reading this register */
 578	i2c_smbus_read_byte_data(chip->client, BH1770_INTERRUPT);
 579
 580	/*
 581	 * Check if there is fresh data available for als.
 582	 * If this is the very first data, update thresholds after that.
 583	 */
 584	if (status & BH1770_INT_ALS_DATA) {
 585		bh1770_lux_get_result(chip);
 586		if (unlikely(chip->lux_wait_result)) {
 587			chip->lux_wait_result = false;
 588			wake_up(&chip->wait);
 589			bh1770_lux_update_thresholds(chip,
 590						chip->lux_threshold_hi,
 591						chip->lux_threshold_lo);
 592		}
 593	}
 594
 595	/* Disable interrupt logic to guarantee acknowledgement */
 596	i2c_smbus_write_byte_data(chip->client, BH1770_INTERRUPT,
 597				  (0 << 1) | (0 << 0));
 598
 599	if ((status & BH1770_INT_ALS_INT))
 600		sysfs_notify(&chip->client->dev.kobj, NULL, "lux0_input");
 601
 602	if (chip->int_mode_prox && (status & BH1770_INT_LEDS_INT)) {
 603		rate = prox_rates_ms[chip->prox_rate_threshold];
 604		bh1770_prox_read_result(chip);
 605	}
 606
 607	/* Re-enable interrupt logic */
 608	i2c_smbus_write_byte_data(chip->client, BH1770_INTERRUPT,
 609				  (chip->int_mode_lux << 1) |
 610				  (chip->int_mode_prox << 0));
 611	mutex_unlock(&chip->mutex);
 612
 613	/*
 614	 * Can't cancel work while keeping mutex since the work uses the
 615	 * same mutex.
 616	 */
 617	if (rate) {
 618		/*
 619		 * Simulate missing no-proximity interrupt 50ms after the
 620		 * next expected interrupt time.
 621		 */
 622		cancel_delayed_work_sync(&chip->prox_work);
 623		schedule_delayed_work(&chip->prox_work,
 624				msecs_to_jiffies(rate + 50));
 625	}
 626	return IRQ_HANDLED;
 627}
 628
 629static ssize_t bh1770_power_state_store(struct device *dev,
 630				      struct device_attribute *attr,
 631				      const char *buf, size_t count)
 632{
 633	struct bh1770_chip *chip =  dev_get_drvdata(dev);
 634	unsigned long value;
 635	ssize_t ret;
 636
 637	ret = kstrtoul(buf, 0, &value);
 638	if (ret)
 639		return ret;
 640
 641	mutex_lock(&chip->mutex);
 642	if (value) {
 643		ret = pm_runtime_resume_and_get(dev);
 644		if (ret < 0)
 645			goto leave;
 646
 647		ret = bh1770_lux_rate(chip, chip->lux_rate_index);
 648		if (ret < 0) {
 649			pm_runtime_put(dev);
 650			goto leave;
 651		}
 652
 653		ret = bh1770_lux_interrupt_control(chip, BH1770_ENABLE);
 654		if (ret < 0) {
 655			pm_runtime_put(dev);
 656			goto leave;
 657		}
 658
 659		/* This causes interrupt after the next measurement cycle */
 660		bh1770_lux_update_thresholds(chip, BH1770_LUX_DEF_THRES,
 661					BH1770_LUX_DEF_THRES);
 662		/* Inform that we are waiting for a result from ALS */
 663		chip->lux_wait_result = true;
 664		bh1770_prox_mode_control(chip);
 665	} else if (!pm_runtime_suspended(dev)) {
 666		pm_runtime_put(dev);
 667	}
 668	ret = count;
 669leave:
 670	mutex_unlock(&chip->mutex);
 671	return ret;
 672}
 673
 674static ssize_t bh1770_power_state_show(struct device *dev,
 675				   struct device_attribute *attr, char *buf)
 676{
 677	return sprintf(buf, "%d\n", !pm_runtime_suspended(dev));
 678}
 679
 680static ssize_t bh1770_lux_result_show(struct device *dev,
 681				   struct device_attribute *attr, char *buf)
 682{
 683	struct bh1770_chip *chip =  dev_get_drvdata(dev);
 684	ssize_t ret;
 685	long time_left;
 686
 687	if (pm_runtime_suspended(dev))
 688		return -EIO; /* Chip is not enabled at all */
 689
 690	time_left = wait_event_interruptible_timeout(chip->wait,
 691						     !chip->lux_wait_result,
 692						     msecs_to_jiffies(BH1770_TIMEOUT));
 693	if (!time_left)
 694		return -EIO;
 695
 696	mutex_lock(&chip->mutex);
 697	ret = sprintf(buf, "%d\n", bh1770_lux_read_result(chip));
 698	mutex_unlock(&chip->mutex);
 699
 700	return ret;
 701}
 702
 703static ssize_t bh1770_lux_range_show(struct device *dev,
 704				   struct device_attribute *attr, char *buf)
 705{
 706	return sprintf(buf, "%d\n", BH1770_LUX_RANGE);
 707}
 708
 709static ssize_t bh1770_prox_enable_store(struct device *dev,
 710				      struct device_attribute *attr,
 711				      const char *buf, size_t count)
 712{
 713	struct bh1770_chip *chip =  dev_get_drvdata(dev);
 714	unsigned long value;
 715	int ret;
 716
 717	ret = kstrtoul(buf, 0, &value);
 718	if (ret)
 719		return ret;
 720
 721	mutex_lock(&chip->mutex);
 722	/* Assume no proximity. Sensor will tell real state soon */
 723	if (!chip->prox_enable_count)
 724		chip->prox_data = 0;
 725
 726	if (value)
 727		chip->prox_enable_count++;
 728	else if (chip->prox_enable_count > 0)
 729		chip->prox_enable_count--;
 730	else
 731		goto leave;
 732
 733	/* Run control only when chip is powered on */
 734	if (!pm_runtime_suspended(dev))
 735		bh1770_prox_mode_control(chip);
 736leave:
 737	mutex_unlock(&chip->mutex);
 738	return count;
 739}
 740
 741static ssize_t bh1770_prox_enable_show(struct device *dev,
 742				   struct device_attribute *attr, char *buf)
 743{
 744	struct bh1770_chip *chip =  dev_get_drvdata(dev);
 745	ssize_t len;
 746
 747	mutex_lock(&chip->mutex);
 748	len = sprintf(buf, "%d\n", chip->prox_enable_count);
 749	mutex_unlock(&chip->mutex);
 750	return len;
 751}
 752
 753static ssize_t bh1770_prox_result_show(struct device *dev,
 754				   struct device_attribute *attr, char *buf)
 755{
 756	struct bh1770_chip *chip =  dev_get_drvdata(dev);
 757	ssize_t ret;
 758
 759	mutex_lock(&chip->mutex);
 760	if (chip->prox_enable_count && !pm_runtime_suspended(dev))
 761		ret = sprintf(buf, "%d\n", chip->prox_data);
 762	else
 763		ret = -EIO;
 764	mutex_unlock(&chip->mutex);
 765	return ret;
 766}
 767
 768static ssize_t bh1770_prox_range_show(struct device *dev,
 769				   struct device_attribute *attr, char *buf)
 770{
 771	return sprintf(buf, "%d\n", BH1770_PROX_RANGE);
 772}
 773
 774static ssize_t bh1770_get_prox_rate_avail(struct device *dev,
 775				   struct device_attribute *attr, char *buf)
 776{
 777	int i;
 778	int pos = 0;
 779	for (i = 0; i < ARRAY_SIZE(prox_rates_hz); i++)
 780		pos += sprintf(buf + pos, "%d ", prox_rates_hz[i]);
 781	sprintf(buf + pos - 1, "\n");
 782	return pos;
 783}
 784
 785static ssize_t bh1770_get_prox_rate_above(struct device *dev,
 786				   struct device_attribute *attr, char *buf)
 787{
 788	struct bh1770_chip *chip =  dev_get_drvdata(dev);
 789	return sprintf(buf, "%d\n", prox_rates_hz[chip->prox_rate_threshold]);
 790}
 791
 792static ssize_t bh1770_get_prox_rate_below(struct device *dev,
 793				   struct device_attribute *attr, char *buf)
 794{
 795	struct bh1770_chip *chip =  dev_get_drvdata(dev);
 796	return sprintf(buf, "%d\n", prox_rates_hz[chip->prox_rate]);
 797}
 798
 799static int bh1770_prox_rate_validate(int rate)
 800{
 801	int i;
 802
 803	for (i = 0; i < ARRAY_SIZE(prox_rates_hz) - 1; i++)
 804		if (rate >= prox_rates_hz[i])
 805			break;
 806	return i;
 807}
 808
 809static ssize_t bh1770_set_prox_rate_above(struct device *dev,
 810					struct device_attribute *attr,
 811					const char *buf, size_t count)
 812{
 813	struct bh1770_chip *chip =  dev_get_drvdata(dev);
 814	unsigned long value;
 815	int ret;
 816
 817	ret = kstrtoul(buf, 0, &value);
 818	if (ret)
 819		return ret;
 820
 821	mutex_lock(&chip->mutex);
 822	chip->prox_rate_threshold = bh1770_prox_rate_validate(value);
 823	mutex_unlock(&chip->mutex);
 824	return count;
 825}
 826
 827static ssize_t bh1770_set_prox_rate_below(struct device *dev,
 828					struct device_attribute *attr,
 829					const char *buf, size_t count)
 830{
 831	struct bh1770_chip *chip =  dev_get_drvdata(dev);
 832	unsigned long value;
 833	int ret;
 834
 835	ret = kstrtoul(buf, 0, &value);
 836	if (ret)
 837		return ret;
 838
 839	mutex_lock(&chip->mutex);
 840	chip->prox_rate = bh1770_prox_rate_validate(value);
 841	mutex_unlock(&chip->mutex);
 842	return count;
 843}
 844
 845static ssize_t bh1770_get_prox_thres(struct device *dev,
 846				   struct device_attribute *attr, char *buf)
 847{
 848	struct bh1770_chip *chip =  dev_get_drvdata(dev);
 849	return sprintf(buf, "%d\n", chip->prox_threshold);
 850}
 851
 852static ssize_t bh1770_set_prox_thres(struct device *dev,
 853				      struct device_attribute *attr,
 854				      const char *buf, size_t count)
 855{
 856	struct bh1770_chip *chip =  dev_get_drvdata(dev);
 857	unsigned long value;
 858	int ret;
 859
 860	ret = kstrtoul(buf, 0, &value);
 861	if (ret)
 862		return ret;
 863
 864	if (value > BH1770_PROX_RANGE)
 865		return -EINVAL;
 866
 867	mutex_lock(&chip->mutex);
 868	chip->prox_threshold = value;
 869	ret = bh1770_prox_set_threshold(chip);
 870	mutex_unlock(&chip->mutex);
 871	if (ret < 0)
 872		return ret;
 873	return count;
 874}
 875
 876static ssize_t bh1770_prox_persistence_show(struct device *dev,
 877				 struct device_attribute *attr, char *buf)
 878{
 879	struct bh1770_chip *chip = dev_get_drvdata(dev);
 880
 881	return sprintf(buf, "%u\n", chip->prox_persistence);
 882}
 883
 884static ssize_t bh1770_prox_persistence_store(struct device *dev,
 885				struct device_attribute *attr,
 886				const char *buf, size_t len)
 887{
 888	struct bh1770_chip *chip = dev_get_drvdata(dev);
 889	unsigned long value;
 890	int ret;
 891
 892	ret = kstrtoul(buf, 0, &value);
 893	if (ret)
 894		return ret;
 895
 896	if (value > BH1770_PROX_MAX_PERSISTENCE)
 897		return -EINVAL;
 898
 899	chip->prox_persistence = value;
 900
 901	return len;
 902}
 903
 904static ssize_t bh1770_prox_abs_thres_show(struct device *dev,
 905				 struct device_attribute *attr, char *buf)
 906{
 907	struct bh1770_chip *chip = dev_get_drvdata(dev);
 908	return sprintf(buf, "%u\n", chip->prox_abs_thres);
 909}
 910
 911static ssize_t bh1770_prox_abs_thres_store(struct device *dev,
 912				struct device_attribute *attr,
 913				const char *buf, size_t len)
 914{
 915	struct bh1770_chip *chip = dev_get_drvdata(dev);
 916	unsigned long value;
 917	int ret;
 918
 919	ret = kstrtoul(buf, 0, &value);
 920	if (ret)
 921		return ret;
 922
 923	if (value > BH1770_PROX_RANGE)
 924		return -EINVAL;
 925
 926	chip->prox_abs_thres = value;
 927
 928	return len;
 929}
 930
 931static ssize_t bh1770_chip_id_show(struct device *dev,
 932				   struct device_attribute *attr, char *buf)
 933{
 934	struct bh1770_chip *chip =  dev_get_drvdata(dev);
 935	return sprintf(buf, "%s rev %d\n", chip->chipname, chip->revision);
 936}
 937
 938static ssize_t bh1770_lux_calib_default_show(struct device *dev,
 939				 struct device_attribute *attr, char *buf)
 940{
 941	return sprintf(buf, "%u\n", BH1770_CALIB_SCALER);
 942}
 943
 944static ssize_t bh1770_lux_calib_show(struct device *dev,
 945				 struct device_attribute *attr, char *buf)
 946{
 947	struct bh1770_chip *chip = dev_get_drvdata(dev);
 948	ssize_t len;
 949
 950	mutex_lock(&chip->mutex);
 951	len = sprintf(buf, "%u\n", chip->lux_calib);
 952	mutex_unlock(&chip->mutex);
 953	return len;
 954}
 955
 956static ssize_t bh1770_lux_calib_store(struct device *dev,
 957				  struct device_attribute *attr,
 958				  const char *buf, size_t len)
 959{
 960	struct bh1770_chip *chip = dev_get_drvdata(dev);
 961	unsigned long value;
 962	u32 old_calib;
 963	u32 new_corr;
 964	int ret;
 965
 966	ret = kstrtoul(buf, 0, &value);
 967	if (ret)
 968		return ret;
 969
 970	mutex_lock(&chip->mutex);
 971	old_calib = chip->lux_calib;
 972	chip->lux_calib = value;
 973	new_corr = bh1770_get_corr_value(chip);
 974	if (new_corr == 0) {
 975		chip->lux_calib = old_calib;
 976		mutex_unlock(&chip->mutex);
 977		return -EINVAL;
 978	}
 979	chip->lux_corr = new_corr;
 980	/* Refresh thresholds on HW after changing correction value */
 981	bh1770_lux_update_thresholds(chip, chip->lux_threshold_hi,
 982				chip->lux_threshold_lo);
 983
 984	mutex_unlock(&chip->mutex);
 985
 986	return len;
 987}
 988
 989static ssize_t bh1770_get_lux_rate_avail(struct device *dev,
 990				   struct device_attribute *attr, char *buf)
 991{
 992	int i;
 993	int pos = 0;
 994	for (i = 0; i < ARRAY_SIZE(lux_rates_hz); i++)
 995		pos += sprintf(buf + pos, "%d ", lux_rates_hz[i]);
 996	sprintf(buf + pos - 1, "\n");
 997	return pos;
 998}
 999
1000static ssize_t bh1770_get_lux_rate(struct device *dev,
1001				   struct device_attribute *attr, char *buf)
1002{
1003	struct bh1770_chip *chip =  dev_get_drvdata(dev);
1004	return sprintf(buf, "%d\n", lux_rates_hz[chip->lux_rate_index]);
1005}
1006
1007static ssize_t bh1770_set_lux_rate(struct device *dev,
1008				      struct device_attribute *attr,
1009				      const char *buf, size_t count)
1010{
1011	struct bh1770_chip *chip =  dev_get_drvdata(dev);
1012	unsigned long rate_hz;
1013	int ret, i;
1014
1015	ret = kstrtoul(buf, 0, &rate_hz);
1016	if (ret)
1017		return ret;
1018
1019	for (i = 0; i < ARRAY_SIZE(lux_rates_hz) - 1; i++)
1020		if (rate_hz >= lux_rates_hz[i])
1021			break;
1022
1023	mutex_lock(&chip->mutex);
1024	chip->lux_rate_index = i;
1025	ret = bh1770_lux_rate(chip, i);
1026	mutex_unlock(&chip->mutex);
1027
1028	if (ret < 0)
1029		return ret;
1030
1031	return count;
1032}
1033
1034static ssize_t bh1770_get_lux_thresh_above(struct device *dev,
1035				   struct device_attribute *attr, char *buf)
1036{
1037	struct bh1770_chip *chip =  dev_get_drvdata(dev);
1038	return sprintf(buf, "%d\n", chip->lux_threshold_hi);
1039}
1040
1041static ssize_t bh1770_get_lux_thresh_below(struct device *dev,
1042				   struct device_attribute *attr, char *buf)
1043{
1044	struct bh1770_chip *chip =  dev_get_drvdata(dev);
1045	return sprintf(buf, "%d\n", chip->lux_threshold_lo);
1046}
1047
1048static ssize_t bh1770_set_lux_thresh(struct bh1770_chip *chip, u16 *target,
1049				const char *buf)
1050{
1051	unsigned long thresh;
1052	int ret;
1053
1054	ret = kstrtoul(buf, 0, &thresh);
1055	if (ret)
1056		return ret;
1057
1058	if (thresh > BH1770_LUX_RANGE)
1059		return -EINVAL;
1060
1061	mutex_lock(&chip->mutex);
1062	*target = thresh;
1063	/*
1064	 * Don't update values in HW if we are still waiting for
1065	 * first interrupt to come after device handle open call.
1066	 */
1067	if (!chip->lux_wait_result)
1068		ret = bh1770_lux_update_thresholds(chip,
1069						chip->lux_threshold_hi,
1070						chip->lux_threshold_lo);
1071	mutex_unlock(&chip->mutex);
1072	return ret;
1073
1074}
1075
1076static ssize_t bh1770_set_lux_thresh_above(struct device *dev,
1077				  struct device_attribute *attr,
1078				  const char *buf, size_t len)
1079{
1080	struct bh1770_chip *chip =  dev_get_drvdata(dev);
1081	int ret = bh1770_set_lux_thresh(chip, &chip->lux_threshold_hi, buf);
1082	if (ret < 0)
1083		return ret;
1084	return len;
1085}
1086
1087static ssize_t bh1770_set_lux_thresh_below(struct device *dev,
1088				  struct device_attribute *attr,
1089				  const char *buf, size_t len)
1090{
1091	struct bh1770_chip *chip =  dev_get_drvdata(dev);
1092	int ret = bh1770_set_lux_thresh(chip, &chip->lux_threshold_lo, buf);
1093	if (ret < 0)
1094		return ret;
1095	return len;
1096}
1097
1098static DEVICE_ATTR(prox0_raw_en, S_IRUGO | S_IWUSR, bh1770_prox_enable_show,
1099						bh1770_prox_enable_store);
1100static DEVICE_ATTR(prox0_thresh_above1_value, S_IRUGO | S_IWUSR,
1101						bh1770_prox_abs_thres_show,
1102						bh1770_prox_abs_thres_store);
1103static DEVICE_ATTR(prox0_thresh_above0_value, S_IRUGO | S_IWUSR,
1104						bh1770_get_prox_thres,
1105						bh1770_set_prox_thres);
1106static DEVICE_ATTR(prox0_raw, S_IRUGO, bh1770_prox_result_show, NULL);
1107static DEVICE_ATTR(prox0_sensor_range, S_IRUGO, bh1770_prox_range_show, NULL);
1108static DEVICE_ATTR(prox0_thresh_above_count, S_IRUGO | S_IWUSR,
1109						bh1770_prox_persistence_show,
1110						bh1770_prox_persistence_store);
1111static DEVICE_ATTR(prox0_rate_above, S_IRUGO | S_IWUSR,
1112						bh1770_get_prox_rate_above,
1113						bh1770_set_prox_rate_above);
1114static DEVICE_ATTR(prox0_rate_below, S_IRUGO | S_IWUSR,
1115						bh1770_get_prox_rate_below,
1116						bh1770_set_prox_rate_below);
1117static DEVICE_ATTR(prox0_rate_avail, S_IRUGO, bh1770_get_prox_rate_avail, NULL);
1118
1119static DEVICE_ATTR(lux0_calibscale, S_IRUGO | S_IWUSR, bh1770_lux_calib_show,
1120						bh1770_lux_calib_store);
1121static DEVICE_ATTR(lux0_calibscale_default, S_IRUGO,
1122						bh1770_lux_calib_default_show,
1123						NULL);
1124static DEVICE_ATTR(lux0_input, S_IRUGO, bh1770_lux_result_show, NULL);
1125static DEVICE_ATTR(lux0_sensor_range, S_IRUGO, bh1770_lux_range_show, NULL);
1126static DEVICE_ATTR(lux0_rate, S_IRUGO | S_IWUSR, bh1770_get_lux_rate,
1127						bh1770_set_lux_rate);
1128static DEVICE_ATTR(lux0_rate_avail, S_IRUGO, bh1770_get_lux_rate_avail, NULL);
1129static DEVICE_ATTR(lux0_thresh_above_value, S_IRUGO | S_IWUSR,
1130						bh1770_get_lux_thresh_above,
1131						bh1770_set_lux_thresh_above);
1132static DEVICE_ATTR(lux0_thresh_below_value, S_IRUGO | S_IWUSR,
1133						bh1770_get_lux_thresh_below,
1134						bh1770_set_lux_thresh_below);
1135static DEVICE_ATTR(chip_id, S_IRUGO, bh1770_chip_id_show, NULL);
1136static DEVICE_ATTR(power_state, S_IRUGO | S_IWUSR, bh1770_power_state_show,
1137						 bh1770_power_state_store);
1138
1139
1140static struct attribute *sysfs_attrs[] = {
1141	&dev_attr_lux0_calibscale.attr,
1142	&dev_attr_lux0_calibscale_default.attr,
1143	&dev_attr_lux0_input.attr,
1144	&dev_attr_lux0_sensor_range.attr,
1145	&dev_attr_lux0_rate.attr,
1146	&dev_attr_lux0_rate_avail.attr,
1147	&dev_attr_lux0_thresh_above_value.attr,
1148	&dev_attr_lux0_thresh_below_value.attr,
1149	&dev_attr_prox0_raw.attr,
1150	&dev_attr_prox0_sensor_range.attr,
1151	&dev_attr_prox0_raw_en.attr,
1152	&dev_attr_prox0_thresh_above_count.attr,
1153	&dev_attr_prox0_rate_above.attr,
1154	&dev_attr_prox0_rate_below.attr,
1155	&dev_attr_prox0_rate_avail.attr,
1156	&dev_attr_prox0_thresh_above0_value.attr,
1157	&dev_attr_prox0_thresh_above1_value.attr,
1158	&dev_attr_chip_id.attr,
1159	&dev_attr_power_state.attr,
1160	NULL
1161};
1162
1163static const struct attribute_group bh1770_attribute_group = {
1164	.attrs = sysfs_attrs
1165};
1166
1167static int bh1770_probe(struct i2c_client *client)
1168{
1169	struct bh1770_chip *chip;
1170	int err;
1171
1172	chip = devm_kzalloc(&client->dev, sizeof *chip, GFP_KERNEL);
1173	if (!chip)
1174		return -ENOMEM;
1175
1176	i2c_set_clientdata(client, chip);
1177	chip->client  = client;
1178
1179	mutex_init(&chip->mutex);
1180	init_waitqueue_head(&chip->wait);
1181	INIT_DELAYED_WORK(&chip->prox_work, bh1770_prox_work);
1182
1183	if (client->dev.platform_data == NULL) {
1184		dev_err(&client->dev, "platform data is mandatory\n");
1185		return -EINVAL;
1186	}
1187
1188	chip->pdata		= client->dev.platform_data;
1189	chip->lux_calib		= BH1770_LUX_NEUTRAL_CALIB_VALUE;
1190	chip->lux_rate_index	= BH1770_LUX_DEFAULT_RATE;
1191	chip->lux_threshold_lo	= BH1770_LUX_DEF_THRES;
1192	chip->lux_threshold_hi	= BH1770_LUX_DEF_THRES;
1193
1194	if (chip->pdata->glass_attenuation == 0)
1195		chip->lux_ga = BH1770_NEUTRAL_GA;
1196	else
1197		chip->lux_ga = chip->pdata->glass_attenuation;
1198
1199	chip->prox_threshold	= BH1770_PROX_DEF_THRES;
1200	chip->prox_led		= chip->pdata->led_def_curr;
1201	chip->prox_abs_thres	= BH1770_PROX_DEF_ABS_THRES;
1202	chip->prox_persistence	= BH1770_DEFAULT_PERSISTENCE;
1203	chip->prox_rate_threshold = BH1770_PROX_DEF_RATE_THRESH;
1204	chip->prox_rate		= BH1770_PROX_DEFAULT_RATE;
1205	chip->prox_data		= 0;
1206
1207	chip->regs[0].supply = reg_vcc;
1208	chip->regs[1].supply = reg_vleds;
1209
1210	err = devm_regulator_bulk_get(&client->dev,
1211				      ARRAY_SIZE(chip->regs), chip->regs);
1212	if (err < 0) {
1213		dev_err(&client->dev, "Cannot get regulators\n");
1214		return err;
1215	}
1216
1217	err = regulator_bulk_enable(ARRAY_SIZE(chip->regs),
1218				chip->regs);
1219	if (err < 0) {
1220		dev_err(&client->dev, "Cannot enable regulators\n");
1221		return err;
1222	}
1223
1224	usleep_range(BH1770_STARTUP_DELAY, BH1770_STARTUP_DELAY * 2);
1225	err = bh1770_detect(chip);
1226	if (err < 0)
1227		goto fail0;
1228
1229	/* Start chip */
1230	bh1770_chip_on(chip);
1231	pm_runtime_set_active(&client->dev);
1232	pm_runtime_enable(&client->dev);
1233
1234	chip->lux_corr = bh1770_get_corr_value(chip);
1235	if (chip->lux_corr == 0) {
1236		dev_err(&client->dev, "Improper correction values\n");
1237		err = -EINVAL;
1238		goto fail0;
1239	}
1240
1241	if (chip->pdata->setup_resources) {
1242		err = chip->pdata->setup_resources();
1243		if (err) {
1244			err = -EINVAL;
1245			goto fail0;
1246		}
1247	}
1248
1249	err = sysfs_create_group(&chip->client->dev.kobj,
1250				&bh1770_attribute_group);
1251	if (err < 0) {
1252		dev_err(&chip->client->dev, "Sysfs registration failed\n");
1253		goto fail1;
1254	}
1255
1256	/*
1257	 * Chip needs level triggered interrupt to work. However,
1258	 * level triggering doesn't work always correctly with power
1259	 * management. Select both
1260	 */
1261	err = request_threaded_irq(client->irq, NULL,
1262				bh1770_irq,
1263				IRQF_TRIGGER_FALLING | IRQF_ONESHOT |
1264				IRQF_TRIGGER_LOW,
1265				"bh1770", chip);
1266	if (err) {
1267		dev_err(&client->dev, "could not get IRQ %d\n",
1268			client->irq);
1269		goto fail2;
1270	}
1271	regulator_bulk_disable(ARRAY_SIZE(chip->regs), chip->regs);
1272	return err;
1273fail2:
1274	sysfs_remove_group(&chip->client->dev.kobj,
1275			&bh1770_attribute_group);
1276fail1:
1277	if (chip->pdata->release_resources)
1278		chip->pdata->release_resources();
1279fail0:
1280	regulator_bulk_disable(ARRAY_SIZE(chip->regs), chip->regs);
1281	return err;
1282}
1283
1284static void bh1770_remove(struct i2c_client *client)
1285{
1286	struct bh1770_chip *chip = i2c_get_clientdata(client);
1287
1288	free_irq(client->irq, chip);
1289
1290	sysfs_remove_group(&chip->client->dev.kobj,
1291			&bh1770_attribute_group);
1292
1293	if (chip->pdata->release_resources)
1294		chip->pdata->release_resources();
1295
1296	cancel_delayed_work_sync(&chip->prox_work);
1297
1298	if (!pm_runtime_suspended(&client->dev))
1299		bh1770_chip_off(chip);
1300
1301	pm_runtime_disable(&client->dev);
1302	pm_runtime_set_suspended(&client->dev);
1303}
1304
1305#ifdef CONFIG_PM_SLEEP
1306static int bh1770_suspend(struct device *dev)
1307{
1308	struct i2c_client *client = to_i2c_client(dev);
1309	struct bh1770_chip *chip = i2c_get_clientdata(client);
1310
1311	bh1770_chip_off(chip);
1312
1313	return 0;
1314}
1315
1316static int bh1770_resume(struct device *dev)
1317{
1318	struct i2c_client *client = to_i2c_client(dev);
1319	struct bh1770_chip *chip = i2c_get_clientdata(client);
1320	int ret = 0;
1321
1322	bh1770_chip_on(chip);
1323
1324	if (!pm_runtime_suspended(dev)) {
1325		/*
1326		 * If we were enabled at suspend time, it is expected
1327		 * everything works nice and smoothly
1328		 */
1329		ret = bh1770_lux_rate(chip, chip->lux_rate_index);
1330		ret |= bh1770_lux_interrupt_control(chip, BH1770_ENABLE);
1331
1332		/* This causes interrupt after the next measurement cycle */
1333		bh1770_lux_update_thresholds(chip, BH1770_LUX_DEF_THRES,
1334					BH1770_LUX_DEF_THRES);
1335		/* Inform that we are waiting for a result from ALS */
1336		chip->lux_wait_result = true;
1337		bh1770_prox_mode_control(chip);
1338	}
1339	return ret;
1340}
1341#endif
1342
1343#ifdef CONFIG_PM
1344static int bh1770_runtime_suspend(struct device *dev)
1345{
1346	struct i2c_client *client = to_i2c_client(dev);
1347	struct bh1770_chip *chip = i2c_get_clientdata(client);
1348
1349	bh1770_chip_off(chip);
1350
1351	return 0;
1352}
1353
1354static int bh1770_runtime_resume(struct device *dev)
1355{
1356	struct i2c_client *client = to_i2c_client(dev);
1357	struct bh1770_chip *chip = i2c_get_clientdata(client);
1358
1359	bh1770_chip_on(chip);
1360
1361	return 0;
1362}
1363#endif
1364
1365static const struct i2c_device_id bh1770_id[] = {
1366	{ "bh1770glc" },
1367	{ "sfh7770" },
1368	{}
1369};
1370
1371MODULE_DEVICE_TABLE(i2c, bh1770_id);
1372
1373static const struct dev_pm_ops bh1770_pm_ops = {
1374	SET_SYSTEM_SLEEP_PM_OPS(bh1770_suspend, bh1770_resume)
1375	SET_RUNTIME_PM_OPS(bh1770_runtime_suspend, bh1770_runtime_resume, NULL)
1376};
1377
1378static struct i2c_driver bh1770_driver = {
1379	.driver	  = {
1380		.name	= "bh1770glc",
1381		.pm	= &bh1770_pm_ops,
1382	},
1383	.probe    = bh1770_probe,
1384	.remove	  = bh1770_remove,
1385	.id_table = bh1770_id,
1386};
1387
1388module_i2c_driver(bh1770_driver);
1389
1390MODULE_DESCRIPTION("BH1770GLC / SFH7770 combined ALS and proximity sensor");
1391MODULE_AUTHOR("Samu Onkalo, Nokia Corporation");
1392MODULE_LICENSE("GPL v2");
~/ Read-only file preview.