FILE
em28xx-cards.c
File preview with syntax highlighting.
linux-6.19.14/drivers/media/usb/em28xx/em28xx-cards.c
1// SPDX-License-Identifier: GPL-2.0+ 2// 3// em28xx-cards.c - driver for Empia EM2800/EM2820/2840 USB 4// video capture devices 5// 6// Copyright (C) 2005 Ludovico Cavedon <cavedon@sssup.it> 7// Markus Rechberger <mrechberger@gmail.com> 8// Mauro Carvalho Chehab <mchehab@kernel.org> 9// Sascha Sommer <saschasommer@freenet.de> 10// Copyright (C) 2012 Frank Schäfer <fschaefer.oss@googlemail.com> 11 12#include "em28xx.h" 13 14#include <linux/init.h> 15#include <linux/module.h> 16#include <linux/slab.h> 17#include <linux/delay.h> 18#include <linux/i2c.h> 19#include <linux/usb.h> 20#include <media/tuner.h> 21#include <media/drv-intf/msp3400.h> 22#include <media/i2c/saa7115.h> 23#include <dt-bindings/media/tvp5150.h> 24#include <media/i2c/tvaudio.h> 25#include <media/tveeprom.h> 26#include <media/v4l2-common.h> 27#include <sound/ac97_codec.h> 28 29#define DRIVER_NAME "em28xx" 30 31static int tuner = -1; 32module_param(tuner, int, 0444); 33MODULE_PARM_DESC(tuner, "tuner type"); 34 35static unsigned int disable_ir; 36module_param(disable_ir, int, 0444); 37MODULE_PARM_DESC(disable_ir, "disable infrared remote support"); 38 39static unsigned int disable_usb_speed_check; 40module_param(disable_usb_speed_check, int, 0444); 41MODULE_PARM_DESC(disable_usb_speed_check, 42 "override min bandwidth requirement of 480M bps"); 43 44static unsigned int card[] = {[0 ... (EM28XX_MAXBOARDS - 1)] = -1U }; 45module_param_array(card, int, NULL, 0444); 46MODULE_PARM_DESC(card, "card type"); 47 48static int usb_xfer_mode = -1; 49module_param(usb_xfer_mode, int, 0444); 50MODULE_PARM_DESC(usb_xfer_mode, 51 "USB transfer mode for frame data (-1 = auto, 0 = prefer isoc, 1 = prefer bulk)"); 52 53/* Bitmask marking allocated devices from 0 to EM28XX_MAXBOARDS - 1 */ 54static DECLARE_BITMAP(em28xx_devused, EM28XX_MAXBOARDS); 55 56struct em28xx_hash_table { 57 unsigned long hash; 58 unsigned int model; 59 unsigned int tuner; 60}; 61 62static void em28xx_pre_card_setup(struct em28xx *dev); 63 64/* 65 * Reset sequences for analog/digital modes 66 */ 67 68/* Reset for the most [analog] boards */ 69static const struct em28xx_reg_seq default_analog[] = { 70 {EM2820_R08_GPIO_CTRL, 0x6d, ~EM_GPIO_4, 10}, 71 { -1, -1, -1, -1}, 72}; 73 74/* Reset for the most [digital] boards */ 75static const struct em28xx_reg_seq default_digital[] = { 76 {EM2820_R08_GPIO_CTRL, 0x6e, ~EM_GPIO_4, 10}, 77 { -1, -1, -1, -1}, 78}; 79 80/* Board :Zolid Hybrid Tv Stick */ 81static struct em28xx_reg_seq zolid_tuner[] = { 82 {EM2820_R08_GPIO_CTRL, 0xfd, 0xff, 100}, 83 {EM2820_R08_GPIO_CTRL, 0xfe, 0xff, 100}, 84 { -1, -1, -1, -1}, 85}; 86 87static struct em28xx_reg_seq zolid_digital[] = { 88 {EM2820_R08_GPIO_CTRL, 0x6a, 0xff, 100}, 89 {EM2820_R08_GPIO_CTRL, 0x7a, 0xff, 100}, 90 {EM2880_R04_GPO, 0x04, 0xff, 100}, 91 {EM2880_R04_GPO, 0x0c, 0xff, 100}, 92 { -1, -1, -1, -1}, 93}; 94 95/* Board Hauppauge WinTV HVR 900 analog */ 96static const struct em28xx_reg_seq hauppauge_wintv_hvr_900_analog[] = { 97 {EM2820_R08_GPIO_CTRL, 0x2d, ~EM_GPIO_4, 10}, 98 { 0x05, 0xff, 0x10, 10}, 99 { -1, -1, -1, -1}, 100}; 101 102/* Board Hauppauge WinTV HVR 900 digital */ 103static const struct em28xx_reg_seq hauppauge_wintv_hvr_900_digital[] = { 104 {EM2820_R08_GPIO_CTRL, 0x2e, ~EM_GPIO_4, 10}, 105 {EM2880_R04_GPO, 0x04, 0x0f, 10}, 106 {EM2880_R04_GPO, 0x0c, 0x0f, 10}, 107 { -1, -1, -1, -1}, 108}; 109 110/* Board Hauppauge WinTV HVR 900 (R2) digital */ 111static const struct em28xx_reg_seq hauppauge_wintv_hvr_900R2_digital[] = { 112 {EM2820_R08_GPIO_CTRL, 0x2e, ~EM_GPIO_4, 10}, 113 {EM2880_R04_GPO, 0x0c, 0x0f, 10}, 114 { -1, -1, -1, -1}, 115}; 116 117/* Boards - EM2880 MSI DIGIVOX AD and EM2880_BOARD_MSI_DIGIVOX_AD_II */ 118static const struct em28xx_reg_seq em2880_msi_digivox_ad_analog[] = { 119 {EM2820_R08_GPIO_CTRL, 0x69, ~EM_GPIO_4, 10}, 120 { -1, -1, -1, -1}, 121}; 122 123/* Board - EM2882 Kworld 315U digital */ 124static const struct em28xx_reg_seq em2882_kworld_315u_digital[] = { 125 {EM2820_R08_GPIO_CTRL, 0xff, 0xff, 10}, 126 {EM2820_R08_GPIO_CTRL, 0xfe, 0xff, 10}, 127 {EM2880_R04_GPO, 0x04, 0xff, 10}, 128 {EM2880_R04_GPO, 0x0c, 0xff, 10}, 129 {EM2820_R08_GPIO_CTRL, 0x7e, 0xff, 10}, 130 { -1, -1, -1, -1}, 131}; 132 133static const struct em28xx_reg_seq em2882_kworld_315u_tuner_gpio[] = { 134 {EM2880_R04_GPO, 0x08, 0xff, 10}, 135 {EM2880_R04_GPO, 0x0c, 0xff, 10}, 136 {EM2880_R04_GPO, 0x08, 0xff, 10}, 137 {EM2880_R04_GPO, 0x0c, 0xff, 10}, 138 { -1, -1, -1, -1}, 139}; 140 141static const struct em28xx_reg_seq kworld_330u_analog[] = { 142 {EM2820_R08_GPIO_CTRL, 0x6d, ~EM_GPIO_4, 10}, 143 {EM2880_R04_GPO, 0x00, 0xff, 10}, 144 { -1, -1, -1, -1}, 145}; 146 147static const struct em28xx_reg_seq kworld_330u_digital[] = { 148 {EM2820_R08_GPIO_CTRL, 0x6e, ~EM_GPIO_4, 10}, 149 {EM2880_R04_GPO, 0x08, 0xff, 10}, 150 { -1, -1, -1, -1}, 151}; 152 153/* 154 * Evga inDtube 155 * GPIO0 - Enable digital power (s5h1409) - low to enable 156 * GPIO1 - Enable analog power (tvp5150/emp202) - low to enable 157 * GPIO4 - xc3028 reset 158 * GOP3 - s5h1409 reset 159 */ 160static const struct em28xx_reg_seq evga_indtube_analog[] = { 161 {EM2820_R08_GPIO_CTRL, 0x79, 0xff, 60}, 162 { -1, -1, -1, -1}, 163}; 164 165static const struct em28xx_reg_seq evga_indtube_digital[] = { 166 {EM2820_R08_GPIO_CTRL, 0x7a, 0xff, 1}, 167 {EM2880_R04_GPO, 0x04, 0xff, 10}, 168 {EM2880_R04_GPO, 0x0c, 0xff, 1}, 169 { -1, -1, -1, -1}, 170}; 171 172/* 173 * KWorld PlusTV 340U, UB435-Q and UB435-Q V2 (ATSC) GPIOs map: 174 * EM_GPIO_0 - currently unknown 175 * EM_GPIO_1 - LED disable/enable (1 = off, 0 = on) 176 * EM_GPIO_2 - currently unknown 177 * EM_GPIO_3 - currently unknown 178 * EM_GPIO_4 - TDA18271HD/C1 tuner (1 = active, 0 = in reset) 179 * EM_GPIO_5 - LGDT3304 ATSC/QAM demod (1 = active, 0 = in reset) 180 * EM_GPIO_6 - currently unknown 181 * EM_GPIO_7 - currently unknown 182 */ 183static const struct em28xx_reg_seq kworld_a340_digital[] = { 184 {EM2820_R08_GPIO_CTRL, 0x6d, ~EM_GPIO_4, 10}, 185 { -1, -1, -1, -1}, 186}; 187 188static const struct em28xx_reg_seq kworld_ub435q_v3_digital[] = { 189 {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 100}, 190 {EM2874_R80_GPIO_P0_CTRL, 0xfe, 0xff, 100}, 191 {EM2874_R80_GPIO_P0_CTRL, 0xbe, 0xff, 100}, 192 {EM2874_R80_GPIO_P0_CTRL, 0xfe, 0xff, 100}, 193 { -1, -1, -1, -1}, 194}; 195 196/* Pinnacle Hybrid Pro eb1a:2881 */ 197static const struct em28xx_reg_seq pinnacle_hybrid_pro_analog[] = { 198 {EM2820_R08_GPIO_CTRL, 0xfd, ~EM_GPIO_4, 10}, 199 { -1, -1, -1, -1}, 200}; 201 202static const struct em28xx_reg_seq pinnacle_hybrid_pro_digital[] = { 203 {EM2820_R08_GPIO_CTRL, 0x6e, ~EM_GPIO_4, 10}, 204 {EM2880_R04_GPO, 0x04, 0xff, 100},/* zl10353 reset */ 205 {EM2880_R04_GPO, 0x0c, 0xff, 1}, 206 { -1, -1, -1, -1}, 207}; 208 209static const struct em28xx_reg_seq terratec_cinergy_USB_XS_FR_analog[] = { 210 {EM2820_R08_GPIO_CTRL, 0x6d, ~EM_GPIO_4, 10}, 211 {EM2880_R04_GPO, 0x00, 0xff, 10}, 212 { -1, -1, -1, -1}, 213}; 214 215static const struct em28xx_reg_seq terratec_cinergy_USB_XS_FR_digital[] = { 216 {EM2820_R08_GPIO_CTRL, 0x6e, ~EM_GPIO_4, 10}, 217 {EM2880_R04_GPO, 0x08, 0xff, 10}, 218 { -1, -1, -1, -1}, 219}; 220 221/* 222 * PCTV HD Mini (80e) GPIOs 223 * 0-5: not used 224 * 6: demod reset, active low 225 * 7: LED on, active high 226 */ 227static const struct em28xx_reg_seq em2874_pctv_80e_digital[] = { 228 {EM28XX_R06_I2C_CLK, 0x45, 0xff, 10}, /*400 KHz*/ 229 {EM2874_R80_GPIO_P0_CTRL, 0x00, 0xff, 100},/*Demod reset*/ 230 {EM2874_R80_GPIO_P0_CTRL, 0x40, 0xff, 10}, 231 { -1, -1, -1, -1}, 232}; 233 234/* 235 * eb1a:2868 Reddo DVB-C USB TV Box 236 * GPIO4 - CU1216L NIM 237 * Other GPIOs seems to be don't care. 238 */ 239static const struct em28xx_reg_seq reddo_dvb_c_usb_box[] = { 240 {EM2820_R08_GPIO_CTRL, 0xfe, 0xff, 10}, 241 {EM2820_R08_GPIO_CTRL, 0xde, 0xff, 10}, 242 {EM2820_R08_GPIO_CTRL, 0xfe, 0xff, 10}, 243 {EM2820_R08_GPIO_CTRL, 0xff, 0xff, 10}, 244 {EM2820_R08_GPIO_CTRL, 0x7f, 0xff, 10}, 245 {EM2820_R08_GPIO_CTRL, 0x6f, 0xff, 10}, 246 {EM2820_R08_GPIO_CTRL, 0xff, 0xff, 10}, 247 { -1, -1, -1, -1}, 248}; 249 250/* Callback for the most boards */ 251static const struct em28xx_reg_seq default_tuner_gpio[] = { 252 {EM2820_R08_GPIO_CTRL, EM_GPIO_4, EM_GPIO_4, 10}, 253 {EM2820_R08_GPIO_CTRL, 0, EM_GPIO_4, 10}, 254 {EM2820_R08_GPIO_CTRL, EM_GPIO_4, EM_GPIO_4, 10}, 255 { -1, -1, -1, -1}, 256}; 257 258/* Mute/unmute */ 259static const struct em28xx_reg_seq compro_unmute_tv_gpio[] = { 260 {EM2820_R08_GPIO_CTRL, 5, 7, 10}, 261 { -1, -1, -1, -1}, 262}; 263 264static const struct em28xx_reg_seq compro_unmute_svid_gpio[] = { 265 {EM2820_R08_GPIO_CTRL, 4, 7, 10}, 266 { -1, -1, -1, -1}, 267}; 268 269static const struct em28xx_reg_seq compro_mute_gpio[] = { 270 {EM2820_R08_GPIO_CTRL, 6, 7, 10}, 271 { -1, -1, -1, -1}, 272}; 273 274/* Terratec AV350 */ 275static const struct em28xx_reg_seq terratec_av350_mute_gpio[] = { 276 {EM2820_R08_GPIO_CTRL, 0xff, 0x7f, 10}, 277 { -1, -1, -1, -1}, 278}; 279 280static const struct em28xx_reg_seq terratec_av350_unmute_gpio[] = { 281 {EM2820_R08_GPIO_CTRL, 0xff, 0xff, 10}, 282 { -1, -1, -1, -1}, 283}; 284 285static const struct em28xx_reg_seq silvercrest_reg_seq[] = { 286 {EM2820_R08_GPIO_CTRL, 0xff, 0xff, 10}, 287 {EM2820_R08_GPIO_CTRL, 0x01, 0xf7, 10}, 288 { -1, -1, -1, -1}, 289}; 290 291static const struct em28xx_reg_seq vc211a_enable[] = { 292 {EM2820_R08_GPIO_CTRL, 0xff, 0x07, 10}, 293 {EM2820_R08_GPIO_CTRL, 0xff, 0x0f, 10}, 294 {EM2820_R08_GPIO_CTRL, 0xff, 0x0b, 10}, 295 { -1, -1, -1, -1}, 296}; 297 298static const struct em28xx_reg_seq dikom_dk300_digital[] = { 299 {EM2820_R08_GPIO_CTRL, 0x6e, ~EM_GPIO_4, 10}, 300 {EM2880_R04_GPO, 0x08, 0xff, 10}, 301 { -1, -1, -1, -1}, 302}; 303 304/* Reset for the most [digital] boards */ 305static const struct em28xx_reg_seq leadership_digital[] = { 306 {EM2874_R80_GPIO_P0_CTRL, 0x70, 0xff, 10}, 307 { -1, -1, -1, -1}, 308}; 309 310static const struct em28xx_reg_seq leadership_reset[] = { 311 {EM2874_R80_GPIO_P0_CTRL, 0xf0, 0xff, 10}, 312 {EM2874_R80_GPIO_P0_CTRL, 0xb0, 0xff, 10}, 313 {EM2874_R80_GPIO_P0_CTRL, 0xf0, 0xff, 10}, 314 { -1, -1, -1, -1}, 315}; 316 317/* 318 * 2013:024f PCTV nanoStick T2 290e 319 * GPIO_6 - demod reset 320 * GPIO_7 - LED 321 */ 322static const struct em28xx_reg_seq pctv_290e[] = { 323 {EM2874_R80_GPIO_P0_CTRL, 0x00, 0xff, 80}, 324 {EM2874_R80_GPIO_P0_CTRL, 0x40, 0xff, 80}, /* GPIO_6 = 1 */ 325 {EM2874_R80_GPIO_P0_CTRL, 0xc0, 0xff, 80}, /* GPIO_7 = 1 */ 326 { -1, -1, -1, -1}, 327}; 328 329#if 0 330static const struct em28xx_reg_seq terratec_h5_gpio[] = { 331 {EM2820_R08_GPIO_CTRL, 0xff, 0xff, 10}, 332 {EM2874_R80_GPIO_P0_CTRL, 0xf6, 0xff, 100}, 333 {EM2874_R80_GPIO_P0_CTRL, 0xf2, 0xff, 50}, 334 {EM2874_R80_GPIO_P0_CTRL, 0xf6, 0xff, 50}, 335 { -1, -1, -1, -1}, 336}; 337 338static const struct em28xx_reg_seq terratec_h5_digital[] = { 339 {EM2874_R80_GPIO_P0_CTRL, 0xf6, 0xff, 10}, 340 {EM2874_R80_GPIO_P0_CTRL, 0xe6, 0xff, 100}, 341 {EM2874_R80_GPIO_P0_CTRL, 0xa6, 0xff, 10}, 342 { -1, -1, -1, -1}, 343}; 344#endif 345 346/* 347 * 2013:024f PCTV DVB-S2 Stick 460e 348 * GPIO_0 - POWER_ON 349 * GPIO_1 - BOOST 350 * GPIO_2 - VUV_LNB (red LED) 351 * GPIO_3 - EXT_12V 352 * GPIO_4 - INT_DEM (DEMOD GPIO_0) 353 * GPIO_5 - INT_LNB 354 * GPIO_6 - RESET_DEM 355 * GPIO_7 - LED (green LED) 356 */ 357static const struct em28xx_reg_seq pctv_460e[] = { 358 {EM2874_R80_GPIO_P0_CTRL, 0x01, 0xff, 50}, 359 { 0x0d, 0xff, 0xff, 50}, 360 {EM2874_R80_GPIO_P0_CTRL, 0x41, 0xff, 50}, /* GPIO_6=1 */ 361 { 0x0d, 0x42, 0xff, 50}, 362 {EM2874_R80_GPIO_P0_CTRL, 0x61, 0xff, 50}, /* GPIO_5=1 */ 363 { -1, -1, -1, -1}, 364}; 365 366static const struct em28xx_reg_seq c3tech_digital_duo_digital[] = { 367 {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 10}, 368 {EM2874_R80_GPIO_P0_CTRL, 0xfd, 0xff, 10}, /* xc5000 reset */ 369 {EM2874_R80_GPIO_P0_CTRL, 0xf9, 0xff, 35}, 370 {EM2874_R80_GPIO_P0_CTRL, 0xfd, 0xff, 10}, 371 {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 10}, 372 {EM2874_R80_GPIO_P0_CTRL, 0xfe, 0xff, 10}, 373 {EM2874_R80_GPIO_P0_CTRL, 0xbe, 0xff, 10}, 374 {EM2874_R80_GPIO_P0_CTRL, 0xfe, 0xff, 20}, 375 { -1, -1, -1, -1}, 376}; 377 378/* 379 * 2013:0258 PCTV DVB-S2 Stick (461e) 380 * GPIO 0 = POWER_ON 381 * GPIO 1 = BOOST 382 * GPIO 2 = VUV_LNB (red LED) 383 * GPIO 3 = #EXT_12V 384 * GPIO 4 = INT_DEM 385 * GPIO 5 = INT_LNB 386 * GPIO 6 = #RESET_DEM 387 * GPIO 7 = P07_LED (green LED) 388 */ 389static const struct em28xx_reg_seq pctv_461e[] = { 390 {EM2874_R80_GPIO_P0_CTRL, 0x7f, 0xff, 0}, 391 {0x0d, 0xff, 0xff, 0}, 392 {EM2874_R80_GPIO_P0_CTRL, 0x3f, 0xff, 100}, /* reset demod */ 393 {EM2874_R80_GPIO_P0_CTRL, 0x7f, 0xff, 200}, /* reset demod */ 394 {0x0d, 0x42, 0xff, 0}, 395 {EM2874_R80_GPIO_P0_CTRL, 0xeb, 0xff, 0}, 396 {EM2874_R5F_TS_ENABLE, 0x84, 0x84, 0}, /* parallel? | null discard */ 397 { -1, -1, -1, -1}, 398}; 399 400#if 0 401static const struct em28xx_reg_seq hauppauge_930c_gpio[] = { 402 {EM2874_R80_GPIO_P0_CTRL, 0x6f, 0xff, 10}, 403 {EM2874_R80_GPIO_P0_CTRL, 0x4f, 0xff, 10}, /* xc5000 reset */ 404 {EM2874_R80_GPIO_P0_CTRL, 0x6f, 0xff, 10}, 405 {EM2874_R80_GPIO_P0_CTRL, 0x4f, 0xff, 10}, 406 { -1, -1, -1, -1}, 407}; 408 409static const struct em28xx_reg_seq hauppauge_930c_digital[] = { 410 {EM2874_R80_GPIO_P0_CTRL, 0xf6, 0xff, 10}, 411 {EM2874_R80_GPIO_P0_CTRL, 0xe6, 0xff, 100}, 412 {EM2874_R80_GPIO_P0_CTRL, 0xa6, 0xff, 10}, 413 { -1, -1, -1, -1}, 414}; 415#endif 416 417/* 418 * 1b80:e425 MaxMedia UB425-TC 419 * 1b80:e1cc Delock 61959 420 * GPIO_6 - demod reset, 0=active 421 * GPIO_7 - LED, 0=active 422 */ 423static const struct em28xx_reg_seq maxmedia_ub425_tc[] = { 424 {EM2874_R80_GPIO_P0_CTRL, 0x83, 0xff, 100}, 425 {EM2874_R80_GPIO_P0_CTRL, 0xc3, 0xff, 100}, /* GPIO_6 = 1 */ 426 {EM2874_R80_GPIO_P0_CTRL, 0x43, 0xff, 000}, /* GPIO_7 = 0 */ 427 { -1, -1, -1, -1}, 428}; 429 430/* 431 * 2304:0242 PCTV QuatroStick (510e) 432 * GPIO_2: decoder reset, 0=active 433 * GPIO_4: decoder suspend, 0=active 434 * GPIO_6: demod reset, 0=active 435 * GPIO_7: LED, 1=active 436 */ 437static const struct em28xx_reg_seq pctv_510e[] = { 438 {EM2874_R80_GPIO_P0_CTRL, 0x10, 0xff, 100}, 439 {EM2874_R80_GPIO_P0_CTRL, 0x14, 0xff, 100}, /* GPIO_2 = 1 */ 440 {EM2874_R80_GPIO_P0_CTRL, 0x54, 0xff, 050}, /* GPIO_6 = 1 */ 441 { -1, -1, -1, -1}, 442}; 443 444/* 445 * 2013:0251 PCTV QuatroStick nano (520e) 446 * GPIO_2: decoder reset, 0=active 447 * GPIO_4: decoder suspend, 0=active 448 * GPIO_6: demod reset, 0=active 449 * GPIO_7: LED, 1=active 450 */ 451static const struct em28xx_reg_seq pctv_520e[] = { 452 {EM2874_R80_GPIO_P0_CTRL, 0x10, 0xff, 100}, 453 {EM2874_R80_GPIO_P0_CTRL, 0x14, 0xff, 100}, /* GPIO_2 = 1 */ 454 {EM2874_R80_GPIO_P0_CTRL, 0x54, 0xff, 050}, /* GPIO_6 = 1 */ 455 {EM2874_R80_GPIO_P0_CTRL, 0xd4, 0xff, 000}, /* GPIO_7 = 1 */ 456 { -1, -1, -1, -1}, 457}; 458 459/* 460 * 1ae7:9003/9004 SpeedLink Vicious And Devine Laplace webcam 461 * reg 0x80/0x84: 462 * GPIO_0: capturing LED, 0=on, 1=off 463 * GPIO_2: AV mute button, 0=pressed, 1=unpressed 464 * GPIO 3: illumination button, 0=pressed, 1=unpressed 465 * GPIO_6: illumination/flash LED, 0=on, 1=off 466 * reg 0x81/0x85: 467 * GPIO_7: snapshot button, 0=pressed, 1=unpressed 468 */ 469static const struct em28xx_reg_seq speedlink_vad_laplace_reg_seq[] = { 470 {EM2820_R08_GPIO_CTRL, 0xf7, 0xff, 10}, 471 {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xb2, 10}, 472 { -1, -1, -1, -1}, 473}; 474 475static const struct em28xx_reg_seq pctv_292e[] = { 476 {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 0}, 477 {0x0d, 0xff, 0xff, 950}, 478 {EM2874_R80_GPIO_P0_CTRL, 0xbd, 0xff, 100}, 479 {EM2874_R80_GPIO_P0_CTRL, 0xfd, 0xff, 410}, 480 {EM2874_R80_GPIO_P0_CTRL, 0x7d, 0xff, 300}, 481 {EM2874_R80_GPIO_P0_CTRL, 0x7c, 0xff, 60}, 482 {0x0d, 0x42, 0xff, 50}, 483 {EM2874_R5F_TS_ENABLE, 0x85, 0xff, 0}, 484 {-1, -1, -1, -1}, 485}; 486 487static const struct em28xx_reg_seq terratec_t2_stick_hd[] = { 488 {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 0}, 489 {0x0d, 0xff, 0xff, 600}, 490 {EM2874_R80_GPIO_P0_CTRL, 0xfc, 0xff, 10}, 491 {EM2874_R80_GPIO_P0_CTRL, 0xbc, 0xff, 100}, 492 {EM2874_R80_GPIO_P0_CTRL, 0xfc, 0xff, 100}, 493 {EM2874_R80_GPIO_P0_CTRL, 0x00, 0xff, 300}, 494 {EM2874_R80_GPIO_P0_CTRL, 0xf8, 0xff, 100}, 495 {EM2874_R80_GPIO_P0_CTRL, 0xfc, 0xff, 300}, 496 {0x0d, 0x42, 0xff, 1000}, 497 {EM2874_R5F_TS_ENABLE, 0x85, 0xff, 0}, 498 {-1, -1, -1, -1}, 499}; 500 501static const struct em28xx_reg_seq plex_px_bcud[] = { 502 {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 0}, 503 {0x0d, 0xff, 0xff, 0}, 504 {EM2874_R50_IR_CONFIG, 0x01, 0xff, 0}, 505 {EM28XX_R06_I2C_CLK, 0x40, 0xff, 0}, 506 {EM2874_R80_GPIO_P0_CTRL, 0xfd, 0xff, 100}, 507 {EM28XX_R12_VINENABLE, 0x20, 0x20, 0}, 508 {0x0d, 0x42, 0xff, 1000}, 509 {EM2874_R80_GPIO_P0_CTRL, 0xfc, 0xff, 10}, 510 {EM2874_R80_GPIO_P0_CTRL, 0xfd, 0xff, 10}, 511 {0x73, 0xfd, 0xff, 100}, 512 {-1, -1, -1, -1}, 513}; 514 515/* 516 * 2040:0265 Hauppauge WinTV-dualHD DVB Isoc 517 * 2040:8265 Hauppauge WinTV-dualHD DVB Bulk 518 * 2040:026d Hauppauge WinTV-dualHD ATSC/QAM Isoc 519 * 2040:826d Hauppauge WinTV-dualHD ATSC/QAM Bulk 520 * reg 0x80/0x84: 521 * GPIO_0: Yellow LED tuner 1, 0=on, 1=off 522 * GPIO_1: Green LED tuner 1, 0=on, 1=off 523 * GPIO_2: Yellow LED tuner 2, 0=on, 1=off 524 * GPIO_3: Green LED tuner 2, 0=on, 1=off 525 * GPIO_5: Reset #2, 0=active 526 * GPIO_6: Reset #1, 0=active 527 */ 528static const struct em28xx_reg_seq hauppauge_dualhd_dvb[] = { 529 {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 0}, 530 {0x0d, 0xff, 0xff, 200}, 531 {0x50, 0x04, 0xff, 300}, 532 {EM2874_R80_GPIO_P0_CTRL, 0xbf, 0xff, 100}, /* demod 1 reset */ 533 {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 100}, 534 {EM2874_R80_GPIO_P0_CTRL, 0xdf, 0xff, 100}, /* demod 2 reset */ 535 {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 100}, 536 {EM2874_R5F_TS_ENABLE, 0x00, 0xff, 50}, /* disable TS filters */ 537 {EM2874_R5D_TS1_PKT_SIZE, 0x05, 0xff, 50}, 538 {EM2874_R5E_TS2_PKT_SIZE, 0x05, 0xff, 50}, 539 {-1, -1, -1, -1}, 540}; 541 542/* Hauppauge USB QuadHD */ 543static struct em28xx_reg_seq hauppauge_usb_quadhd_atsc_reg_seq[] = { 544 {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 0}, 545 {0x0d, 0xff, 0xff, 200}, 546 {0x50, 0x04, 0xff, 300}, 547 {EM2874_R80_GPIO_P0_CTRL, 0xb0, 0xf0, 100}, /* demod 1 reset */ 548 {EM2874_R80_GPIO_P0_CTRL, 0xf0, 0xf0, 100}, 549 {EM2874_R80_GPIO_P0_CTRL, 0xd0, 0xf0, 100}, /* demod 2 reset */ 550 {EM2874_R80_GPIO_P0_CTRL, 0xf0, 0xf0, 100}, 551 {EM2874_R5F_TS_ENABLE, 0x44, 0xff, 50}, 552 {EM2874_R5D_TS1_PKT_SIZE, 0x05, 0xff, 50}, 553 {EM2874_R5E_TS2_PKT_SIZE, 0x05, 0xff, 50}, 554 {-1, -1, -1, -1}, 555}; 556 557/* 558 * MyGica USB TV Box 559 * GPIO_1,0: 00=Composite audio 560 * 01=Tuner audio 561 * 10=Mute audio 562 * 11=FM radio? (if equipped) 563 * GPIO_2-6: Unused 564 * GPIO_7: ?? 565 */ 566static const struct em28xx_reg_seq mygica_utv3_composite_audio_gpio[] = { 567 {EM2820_R08_GPIO_CTRL, 0xfc, 0xff, 0}, 568 { -1, -1, -1, -1}, 569}; 570 571static const struct em28xx_reg_seq mygica_utv3_tuner_audio_gpio[] = { 572 {EM2820_R08_GPIO_CTRL, 0xfd, 0xff, 0}, 573 { -1, -1, -1, -1}, 574}; 575 576static const struct em28xx_reg_seq mygica_utv3_suspend_gpio[] = { 577 {EM2820_R08_GPIO_CTRL, 0xfe, 0xff, 0}, 578 { -1, -1, -1, -1}, 579}; 580 581/* 582 * Button definitions 583 */ 584static const struct em28xx_button std_snapshot_button[] = { 585 { 586 .role = EM28XX_BUTTON_SNAPSHOT, 587 .reg_r = EM28XX_R0C_USBSUSP, 588 .reg_clearing = EM28XX_R0C_USBSUSP, 589 .mask = EM28XX_R0C_USBSUSP_SNAPSHOT, 590 .inverted = 0, 591 }, 592 {-1, 0, 0, 0, 0}, 593}; 594 595static const struct em28xx_button speedlink_vad_laplace_buttons[] = { 596 { 597 .role = EM28XX_BUTTON_SNAPSHOT, 598 .reg_r = EM2874_R85_GPIO_P1_STATE, 599 .mask = 0x80, 600 .inverted = 1, 601 }, 602 { 603 .role = EM28XX_BUTTON_ILLUMINATION, 604 .reg_r = EM2874_R84_GPIO_P0_STATE, 605 .mask = 0x08, 606 .inverted = 1, 607 }, 608 {-1, 0, 0, 0, 0}, 609}; 610 611/* 612 * LED definitions 613 */ 614static struct em28xx_led speedlink_vad_laplace_leds[] = { 615 { 616 .role = EM28XX_LED_ANALOG_CAPTURING, 617 .gpio_reg = EM2874_R80_GPIO_P0_CTRL, 618 .gpio_mask = 0x01, 619 .inverted = 1, 620 }, 621 { 622 .role = EM28XX_LED_ILLUMINATION, 623 .gpio_reg = EM2874_R80_GPIO_P0_CTRL, 624 .gpio_mask = 0x40, 625 .inverted = 1, 626 }, 627 {-1, 0, 0, 0}, 628}; 629 630static struct em28xx_led kworld_ub435q_v3_leds[] = { 631 { 632 .role = EM28XX_LED_DIGITAL_CAPTURING, 633 .gpio_reg = EM2874_R80_GPIO_P0_CTRL, 634 .gpio_mask = 0x80, 635 .inverted = 1, 636 }, 637 {-1, 0, 0, 0}, 638}; 639 640static struct em28xx_led pctv_80e_leds[] = { 641 { 642 .role = EM28XX_LED_DIGITAL_CAPTURING, 643 .gpio_reg = EM2874_R80_GPIO_P0_CTRL, 644 .gpio_mask = 0x80, 645 .inverted = 0, 646 }, 647 {-1, 0, 0, 0}, 648}; 649 650static struct em28xx_led terratec_grabby_leds[] = { 651 { 652 .role = EM28XX_LED_ANALOG_CAPTURING, 653 .gpio_reg = EM2820_R08_GPIO_CTRL, 654 .gpio_mask = EM_GPIO_3, 655 .inverted = 1, 656 }, 657 {-1, 0, 0, 0}, 658}; 659 660static struct em28xx_led hauppauge_dualhd_leds[] = { 661 { 662 .role = EM28XX_LED_DIGITAL_CAPTURING, 663 .gpio_reg = EM2874_R80_GPIO_P0_CTRL, 664 .gpio_mask = EM_GPIO_1, 665 .inverted = 1, 666 }, 667 { 668 .role = EM28XX_LED_DIGITAL_CAPTURING_TS2, 669 .gpio_reg = EM2874_R80_GPIO_P0_CTRL, 670 .gpio_mask = EM_GPIO_3, 671 .inverted = 1, 672 }, 673 {-1, 0, 0, 0}, 674}; 675 676static struct em28xx_led hauppauge_usb_quadhd_leds[] = { 677 { 678 .role = EM28XX_LED_DIGITAL_CAPTURING, 679 .gpio_reg = EM2874_R80_GPIO_P0_CTRL, 680 .gpio_mask = EM_GPIO_2, 681 .inverted = 1, 682 }, 683 { 684 .role = EM28XX_LED_DIGITAL_CAPTURING_TS2, 685 .gpio_reg = EM2874_R80_GPIO_P0_CTRL, 686 .gpio_mask = EM_GPIO_0, 687 .inverted = 1, 688 }, 689 {-1, 0, 0, 0}, 690}; 691 692/* 693 * Board definitions 694 */ 695const struct em28xx_board em28xx_boards[] = { 696 [EM2750_BOARD_UNKNOWN] = { 697 .name = "EM2710/EM2750/EM2751 webcam grabber", 698 .xclk = EM28XX_XCLK_FREQUENCY_20MHZ, 699 .tuner_type = TUNER_ABSENT, 700 .is_webcam = 1, 701 .input = { { 702 .type = EM28XX_VMUX_COMPOSITE, 703 .vmux = 0, 704 .amux = EM28XX_AMUX_VIDEO, 705 .gpio = silvercrest_reg_seq, 706 } }, 707 }, 708 [EM2800_BOARD_UNKNOWN] = { 709 .name = "Unknown EM2800 video grabber", 710 .is_em2800 = 1, 711 .tda9887_conf = TDA9887_PRESENT, 712 .decoder = EM28XX_SAA711X, 713 .tuner_type = TUNER_ABSENT, 714 .input = { { 715 .type = EM28XX_VMUX_COMPOSITE, 716 .vmux = SAA7115_COMPOSITE0, 717 .amux = EM28XX_AMUX_LINE_IN, 718 }, { 719 .type = EM28XX_VMUX_SVIDEO, 720 .vmux = SAA7115_SVIDEO3, 721 .amux = EM28XX_AMUX_LINE_IN, 722 } }, 723 }, 724 [EM2820_BOARD_UNKNOWN] = { 725 .name = "Unknown EM2750/28xx video grabber", 726 .tuner_type = TUNER_ABSENT, 727 .is_webcam = 1, /* To enable sensor probe */ 728 }, 729 [EM2882_BOARD_ZOLID_HYBRID_TV_STICK] = { 730 .name = ":ZOLID HYBRID TV STICK", 731 .tuner_type = TUNER_XC2028, 732 .tuner_gpio = zolid_tuner, 733 .decoder = EM28XX_TVP5150, 734 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, 735 .mts_firmware = 1, 736 .has_dvb = 1, 737 .dvb_gpio = zolid_digital, 738 }, 739 [EM2750_BOARD_DLCW_130] = { 740 /* Beijing Huaqi Information Digital Technology Co., Ltd */ 741 .name = "Huaqi DLCW-130", 742 .valid = EM28XX_BOARD_NOT_VALIDATED, 743 .xclk = EM28XX_XCLK_FREQUENCY_48MHZ, 744 .tuner_type = TUNER_ABSENT, 745 .is_webcam = 1, 746 .input = { { 747 .type = EM28XX_VMUX_COMPOSITE, 748 .vmux = 0, 749 .amux = EM28XX_AMUX_VIDEO, 750 } }, 751 }, 752 [EM2820_BOARD_KWORLD_PVRTV2800RF] = { 753 .name = "Kworld PVR TV 2800 RF", 754 .tuner_type = TUNER_TEMIC_PAL, 755 .tda9887_conf = TDA9887_PRESENT, 756 .decoder = EM28XX_SAA711X, 757 .input = { { 758 .type = EM28XX_VMUX_COMPOSITE, 759 .vmux = SAA7115_COMPOSITE0, 760 .amux = EM28XX_AMUX_LINE_IN, 761 }, { 762 .type = EM28XX_VMUX_SVIDEO, 763 .vmux = SAA7115_SVIDEO3, 764 .amux = EM28XX_AMUX_LINE_IN, 765 } }, 766 }, 767 [EM2820_BOARD_GADMEI_TVR200] = { 768 .name = "Gadmei TVR200", 769 .tuner_type = TUNER_LG_PAL_NEW_TAPC, 770 .tda9887_conf = TDA9887_PRESENT, 771 .decoder = EM28XX_SAA711X, 772 .input = { { 773 .type = EM28XX_VMUX_TELEVISION, 774 .vmux = SAA7115_COMPOSITE2, 775 .amux = EM28XX_AMUX_LINE_IN, 776 }, { 777 .type = EM28XX_VMUX_COMPOSITE, 778 .vmux = SAA7115_COMPOSITE0, 779 .amux = EM28XX_AMUX_LINE_IN, 780 }, { 781 .type = EM28XX_VMUX_SVIDEO, 782 .vmux = SAA7115_SVIDEO3, 783 .amux = EM28XX_AMUX_LINE_IN, 784 } }, 785 }, 786 [EM2820_BOARD_TERRATEC_CINERGY_250] = { 787 .name = "Terratec Cinergy 250 USB", 788 .tuner_type = TUNER_LG_PAL_NEW_TAPC, 789 .has_ir_i2c = 1, 790 .tda9887_conf = TDA9887_PRESENT, 791 .decoder = EM28XX_SAA711X, 792 .input = { { 793 .type = EM28XX_VMUX_TELEVISION, 794 .vmux = SAA7115_COMPOSITE2, 795 .amux = EM28XX_AMUX_VIDEO, 796 }, { 797 .type = EM28XX_VMUX_COMPOSITE, 798 .vmux = SAA7115_COMPOSITE0, 799 .amux = EM28XX_AMUX_LINE_IN, 800 }, { 801 .type = EM28XX_VMUX_SVIDEO, 802 .vmux = SAA7115_SVIDEO3, 803 .amux = EM28XX_AMUX_LINE_IN, 804 } }, 805 }, 806 [EM2820_BOARD_PINNACLE_USB_2] = { 807 .name = "Pinnacle PCTV USB 2", 808 .tuner_type = TUNER_LG_PAL_NEW_TAPC, 809 .has_ir_i2c = 1, 810 .tda9887_conf = TDA9887_PRESENT, 811 .decoder = EM28XX_SAA711X, 812 .input = { { 813 .type = EM28XX_VMUX_TELEVISION, 814 .vmux = SAA7115_COMPOSITE2, 815 .amux = EM28XX_AMUX_VIDEO, 816 }, { 817 .type = EM28XX_VMUX_COMPOSITE, 818 .vmux = SAA7115_COMPOSITE0, 819 .amux = EM28XX_AMUX_LINE_IN, 820 }, { 821 .type = EM28XX_VMUX_SVIDEO, 822 .vmux = SAA7115_SVIDEO3, 823 .amux = EM28XX_AMUX_LINE_IN, 824 } }, 825 }, 826 [EM2820_BOARD_HAUPPAUGE_WINTV_USB_2] = { 827 .name = "Hauppauge WinTV USB 2", 828 .tuner_type = TUNER_PHILIPS_FM1236_MK3, 829 .tda9887_conf = TDA9887_PRESENT | 830 TDA9887_PORT1_ACTIVE | 831 TDA9887_PORT2_ACTIVE, 832 .decoder = EM28XX_TVP5150, 833 .has_msp34xx = 1, 834 .has_ir_i2c = 1, 835 .input = { { 836 .type = EM28XX_VMUX_TELEVISION, 837 .vmux = TVP5150_COMPOSITE0, 838 .amux = MSP_INPUT_DEFAULT, 839 }, { 840 .type = EM28XX_VMUX_SVIDEO, 841 .vmux = TVP5150_SVIDEO, 842 .amux = MSP_INPUT(MSP_IN_SCART1, MSP_IN_TUNER1, 843 MSP_DSP_IN_SCART, MSP_DSP_IN_SCART), 844 } }, 845 }, 846 [EM2820_BOARD_DLINK_USB_TV] = { 847 .name = "D-Link DUB-T210 TV Tuner", 848 .valid = EM28XX_BOARD_NOT_VALIDATED, 849 .tuner_type = TUNER_LG_PAL_NEW_TAPC, 850 .tda9887_conf = TDA9887_PRESENT, 851 .decoder = EM28XX_SAA711X, 852 .input = { { 853 .type = EM28XX_VMUX_TELEVISION, 854 .vmux = SAA7115_COMPOSITE2, 855 .amux = EM28XX_AMUX_LINE_IN, 856 }, { 857 .type = EM28XX_VMUX_COMPOSITE, 858 .vmux = SAA7115_COMPOSITE0, 859 .amux = EM28XX_AMUX_LINE_IN, 860 }, { 861 .type = EM28XX_VMUX_SVIDEO, 862 .vmux = SAA7115_SVIDEO3, 863 .amux = EM28XX_AMUX_LINE_IN, 864 } }, 865 }, 866 [EM2820_BOARD_HERCULES_SMART_TV_USB2] = { 867 .name = "Hercules Smart TV USB 2.0", 868 .valid = EM28XX_BOARD_NOT_VALIDATED, 869 .tuner_type = TUNER_LG_PAL_NEW_TAPC, 870 .tda9887_conf = TDA9887_PRESENT, 871 .decoder = EM28XX_SAA711X, 872 .input = { { 873 .type = EM28XX_VMUX_TELEVISION, 874 .vmux = SAA7115_COMPOSITE2, 875 .amux = EM28XX_AMUX_LINE_IN, 876 }, { 877 .type = EM28XX_VMUX_COMPOSITE, 878 .vmux = SAA7115_COMPOSITE0, 879 .amux = EM28XX_AMUX_LINE_IN, 880 }, { 881 .type = EM28XX_VMUX_SVIDEO, 882 .vmux = SAA7115_SVIDEO3, 883 .amux = EM28XX_AMUX_LINE_IN, 884 } }, 885 }, 886 [EM2820_BOARD_PINNACLE_USB_2_FM1216ME] = { 887 .name = "Pinnacle PCTV USB 2 (Philips FM1216ME)", 888 .valid = EM28XX_BOARD_NOT_VALIDATED, 889 .tuner_type = TUNER_PHILIPS_FM1216ME_MK3, 890 .tda9887_conf = TDA9887_PRESENT, 891 .decoder = EM28XX_SAA711X, 892 .input = { { 893 .type = EM28XX_VMUX_TELEVISION, 894 .vmux = SAA7115_COMPOSITE2, 895 .amux = EM28XX_AMUX_VIDEO, 896 }, { 897 .type = EM28XX_VMUX_COMPOSITE, 898 .vmux = SAA7115_COMPOSITE0, 899 .amux = EM28XX_AMUX_LINE_IN, 900 }, { 901 .type = EM28XX_VMUX_SVIDEO, 902 .vmux = SAA7115_SVIDEO3, 903 .amux = EM28XX_AMUX_LINE_IN, 904 } }, 905 }, 906 [EM2820_BOARD_GADMEI_UTV310] = { 907 .name = "Gadmei UTV310", 908 .valid = EM28XX_BOARD_NOT_VALIDATED, 909 .tuner_type = TUNER_TNF_5335MF, 910 .tda9887_conf = TDA9887_PRESENT, 911 .decoder = EM28XX_SAA711X, 912 .input = { { 913 .type = EM28XX_VMUX_TELEVISION, 914 .vmux = SAA7115_COMPOSITE1, 915 .amux = EM28XX_AMUX_LINE_IN, 916 }, { 917 .type = EM28XX_VMUX_COMPOSITE, 918 .vmux = SAA7115_COMPOSITE0, 919 .amux = EM28XX_AMUX_LINE_IN, 920 }, { 921 .type = EM28XX_VMUX_SVIDEO, 922 .vmux = SAA7115_SVIDEO3, 923 .amux = EM28XX_AMUX_LINE_IN, 924 } }, 925 }, 926 [EM2820_BOARD_LEADTEK_WINFAST_USBII_DELUXE] = { 927 .name = "Leadtek Winfast USB II Deluxe", 928 .valid = EM28XX_BOARD_NOT_VALIDATED, 929 .tuner_type = TUNER_PHILIPS_FM1216ME_MK3, 930 .has_ir_i2c = 1, 931 .tvaudio_addr = 0x58, 932 .tda9887_conf = TDA9887_PRESENT | 933 TDA9887_PORT2_ACTIVE | 934 TDA9887_QSS, 935 .decoder = EM28XX_SAA711X, 936 .adecoder = EM28XX_TVAUDIO, 937 .input = { { 938 .type = EM28XX_VMUX_TELEVISION, 939 .vmux = SAA7115_COMPOSITE4, 940 .amux = EM28XX_AMUX_AUX, 941 }, { 942 .type = EM28XX_VMUX_COMPOSITE, 943 .vmux = SAA7115_COMPOSITE5, 944 .amux = EM28XX_AMUX_LINE_IN, 945 }, { 946 .type = EM28XX_VMUX_SVIDEO, 947 .vmux = SAA7115_SVIDEO3, 948 .amux = EM28XX_AMUX_LINE_IN, 949 } }, 950 .radio = { 951 .type = EM28XX_RADIO, 952 .amux = EM28XX_AMUX_AUX, 953 } 954 }, 955 [EM2820_BOARD_VIDEOLOGY_20K14XUSB] = { 956 .name = "Videology 20K14XUSB USB2.0", 957 .valid = EM28XX_BOARD_NOT_VALIDATED, 958 .tuner_type = TUNER_ABSENT, 959 .is_webcam = 1, 960 .input = { { 961 .type = EM28XX_VMUX_COMPOSITE, 962 .vmux = 0, 963 .amux = EM28XX_AMUX_VIDEO, 964 } }, 965 }, 966 [EM2820_BOARD_SILVERCREST_WEBCAM] = { 967 .name = "Silvercrest Webcam 1.3mpix", 968 .tuner_type = TUNER_ABSENT, 969 .is_webcam = 1, 970 .input = { { 971 .type = EM28XX_VMUX_COMPOSITE, 972 .vmux = 0, 973 .amux = EM28XX_AMUX_VIDEO, 974 .gpio = silvercrest_reg_seq, 975 } }, 976 }, 977 [EM2821_BOARD_SUPERCOMP_USB_2] = { 978 .name = "Supercomp USB 2.0 TV", 979 .valid = EM28XX_BOARD_NOT_VALIDATED, 980 .tuner_type = TUNER_PHILIPS_FM1236_MK3, 981 .tda9887_conf = TDA9887_PRESENT | 982 TDA9887_PORT1_ACTIVE | 983 TDA9887_PORT2_ACTIVE, 984 .decoder = EM28XX_SAA711X, 985 .input = { { 986 .type = EM28XX_VMUX_TELEVISION, 987 .vmux = SAA7115_COMPOSITE2, 988 .amux = EM28XX_AMUX_LINE_IN, 989 }, { 990 .type = EM28XX_VMUX_COMPOSITE, 991 .vmux = SAA7115_COMPOSITE0, 992 .amux = EM28XX_AMUX_VIDEO, 993 }, { 994 .type = EM28XX_VMUX_SVIDEO, 995 .vmux = SAA7115_SVIDEO3, 996 .amux = EM28XX_AMUX_LINE_IN, 997 } }, 998 }, 999 [EM2821_BOARD_USBGEAR_VD204] = { 1000 .name = "Usbgear VD204v9", 1001 .valid = EM28XX_BOARD_NOT_VALIDATED, 1002 .tuner_type = TUNER_ABSENT, /* Capture only device */ 1003 .decoder = EM28XX_SAA711X, 1004 .input = { { 1005 .type = EM28XX_VMUX_COMPOSITE, 1006 .vmux = SAA7115_COMPOSITE0, 1007 .amux = EM28XX_AMUX_LINE_IN, 1008 }, { 1009 .type = EM28XX_VMUX_SVIDEO, 1010 .vmux = SAA7115_SVIDEO3, 1011 .amux = EM28XX_AMUX_LINE_IN, 1012 } }, 1013 }, 1014 [EM2860_BOARD_NETGMBH_CAM] = { 1015 /* Beijing Huaqi Information Digital Technology Co., Ltd */ 1016 .name = "NetGMBH Cam", 1017 .valid = EM28XX_BOARD_NOT_VALIDATED, 1018 .tuner_type = TUNER_ABSENT, 1019 .is_webcam = 1, 1020 .input = { { 1021 .type = EM28XX_VMUX_COMPOSITE, 1022 .vmux = 0, 1023 .amux = EM28XX_AMUX_VIDEO, 1024 } }, 1025 }, 1026 [EM2860_BOARD_TYPHOON_DVD_MAKER] = { 1027 .name = "Typhoon DVD Maker", 1028 .decoder = EM28XX_SAA711X, 1029 .tuner_type = TUNER_ABSENT, /* Capture only device */ 1030 .input = { { 1031 .type = EM28XX_VMUX_COMPOSITE, 1032 .vmux = SAA7115_COMPOSITE0, 1033 .amux = EM28XX_AMUX_LINE_IN, 1034 }, { 1035 .type = EM28XX_VMUX_SVIDEO, 1036 .vmux = SAA7115_SVIDEO3, 1037 .amux = EM28XX_AMUX_LINE_IN, 1038 } }, 1039 }, 1040 [EM2860_BOARD_GADMEI_UTV330] = { 1041 .name = "Gadmei UTV330", 1042 .valid = EM28XX_BOARD_NOT_VALIDATED, 1043 .tuner_type = TUNER_TNF_5335MF, 1044 .tda9887_conf = TDA9887_PRESENT, 1045 .decoder = EM28XX_SAA711X, 1046 .input = { { 1047 .type = EM28XX_VMUX_TELEVISION, 1048 .vmux = SAA7115_COMPOSITE2, 1049 .amux = EM28XX_AMUX_VIDEO, 1050 }, { 1051 .type = EM28XX_VMUX_COMPOSITE, 1052 .vmux = SAA7115_COMPOSITE0, 1053 .amux = EM28XX_AMUX_LINE_IN, 1054 }, { 1055 .type = EM28XX_VMUX_SVIDEO, 1056 .vmux = SAA7115_SVIDEO3, 1057 .amux = EM28XX_AMUX_LINE_IN, 1058 } }, 1059 }, 1060 [EM2861_BOARD_GADMEI_UTV330PLUS] = { 1061 .name = "Gadmei UTV330+", 1062 .tuner_type = TUNER_TNF_5335MF, 1063 .tda9887_conf = TDA9887_PRESENT, 1064 .ir_codes = RC_MAP_GADMEI_RM008Z, 1065 .decoder = EM28XX_SAA711X, 1066 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, 1067 .input = { { 1068 .type = EM28XX_VMUX_TELEVISION, 1069 .vmux = SAA7115_COMPOSITE2, 1070 .amux = EM28XX_AMUX_VIDEO, 1071 }, { 1072 .type = EM28XX_VMUX_COMPOSITE, 1073 .vmux = SAA7115_COMPOSITE0, 1074 .amux = EM28XX_AMUX_LINE_IN, 1075 }, { 1076 .type = EM28XX_VMUX_SVIDEO, 1077 .vmux = SAA7115_SVIDEO3, 1078 .amux = EM28XX_AMUX_LINE_IN, 1079 } }, 1080 }, 1081 [EM2860_BOARD_TERRATEC_HYBRID_XS] = { 1082 .name = "Terratec Cinergy A Hybrid XS", 1083 .valid = EM28XX_BOARD_NOT_VALIDATED, 1084 .tuner_type = TUNER_XC2028, 1085 .tuner_gpio = default_tuner_gpio, 1086 .decoder = EM28XX_TVP5150, 1087 1088 .input = { { 1089 .type = EM28XX_VMUX_TELEVISION, 1090 .vmux = TVP5150_COMPOSITE0, 1091 .amux = EM28XX_AMUX_VIDEO, 1092 .gpio = hauppauge_wintv_hvr_900_analog, 1093 }, { 1094 .type = EM28XX_VMUX_COMPOSITE, 1095 .vmux = TVP5150_COMPOSITE1, 1096 .amux = EM28XX_AMUX_LINE_IN, 1097 .gpio = hauppauge_wintv_hvr_900_analog, 1098 }, { 1099 .type = EM28XX_VMUX_SVIDEO, 1100 .vmux = TVP5150_SVIDEO, 1101 .amux = EM28XX_AMUX_LINE_IN, 1102 .gpio = hauppauge_wintv_hvr_900_analog, 1103 } }, 1104 }, 1105 [EM2861_BOARD_KWORLD_PVRTV_300U] = { 1106 .name = "KWorld PVRTV 300U", 1107 .valid = EM28XX_BOARD_NOT_VALIDATED, 1108 .tuner_type = TUNER_XC2028, 1109 .tuner_gpio = default_tuner_gpio, 1110 .decoder = EM28XX_TVP5150, 1111 .input = { { 1112 .type = EM28XX_VMUX_TELEVISION, 1113 .vmux = TVP5150_COMPOSITE0, 1114 .amux = EM28XX_AMUX_VIDEO, 1115 }, { 1116 .type = EM28XX_VMUX_COMPOSITE, 1117 .vmux = TVP5150_COMPOSITE1, 1118 .amux = EM28XX_AMUX_LINE_IN, 1119 }, { 1120 .type = EM28XX_VMUX_SVIDEO, 1121 .vmux = TVP5150_SVIDEO, 1122 .amux = EM28XX_AMUX_LINE_IN, 1123 } }, 1124 }, 1125 [EM2861_BOARD_YAKUMO_MOVIE_MIXER] = { 1126 .name = "Yakumo MovieMixer", 1127 .tuner_type = TUNER_ABSENT, /* Capture only device */ 1128 .decoder = EM28XX_TVP5150, 1129 .input = { { 1130 .type = EM28XX_VMUX_TELEVISION, 1131 .vmux = TVP5150_COMPOSITE0, 1132 .amux = EM28XX_AMUX_VIDEO, 1133 }, { 1134 .type = EM28XX_VMUX_COMPOSITE, 1135 .vmux = TVP5150_COMPOSITE1, 1136 .amux = EM28XX_AMUX_LINE_IN, 1137 }, { 1138 .type = EM28XX_VMUX_SVIDEO, 1139 .vmux = TVP5150_SVIDEO, 1140 .amux = EM28XX_AMUX_LINE_IN, 1141 } }, 1142 }, 1143 [EM2860_BOARD_TVP5150_REFERENCE_DESIGN] = { 1144 .name = "EM2860/TVP5150 Reference Design", 1145 .tuner_type = TUNER_ABSENT, /* Capture only device */ 1146 .decoder = EM28XX_TVP5150, 1147 .input = { { 1148 .type = EM28XX_VMUX_COMPOSITE, 1149 .vmux = TVP5150_COMPOSITE1, 1150 .amux = EM28XX_AMUX_LINE_IN, 1151 }, { 1152 .type = EM28XX_VMUX_SVIDEO, 1153 .vmux = TVP5150_SVIDEO, 1154 .amux = EM28XX_AMUX_LINE_IN, 1155 } }, 1156 }, 1157 [EM2861_BOARD_PLEXTOR_PX_TV100U] = { 1158 .name = "Plextor ConvertX PX-TV100U", 1159 .tuner_type = TUNER_TNF_5335MF, 1160 .xclk = EM28XX_XCLK_I2S_MSB_TIMING | 1161 EM28XX_XCLK_FREQUENCY_12MHZ, 1162 .tda9887_conf = TDA9887_PRESENT, 1163 .decoder = EM28XX_TVP5150, 1164 .has_msp34xx = 1, 1165 .input = { { 1166 .type = EM28XX_VMUX_TELEVISION, 1167 .vmux = TVP5150_COMPOSITE0, 1168 .amux = EM28XX_AMUX_LINE_IN, 1169 .gpio = pinnacle_hybrid_pro_analog, 1170 }, { 1171 .type = EM28XX_VMUX_COMPOSITE, 1172 .vmux = TVP5150_COMPOSITE1, 1173 .amux = EM28XX_AMUX_LINE_IN, 1174 .gpio = pinnacle_hybrid_pro_analog, 1175 }, { 1176 .type = EM28XX_VMUX_SVIDEO, 1177 .vmux = TVP5150_SVIDEO, 1178 .amux = EM28XX_AMUX_LINE_IN, 1179 .gpio = pinnacle_hybrid_pro_analog, 1180 } }, 1181 }, 1182 1183 /* Those boards with em2870 are DVB Only*/ 1184 1185 [EM2870_BOARD_TERRATEC_XS] = { 1186 .name = "Terratec Cinergy T XS", 1187 .valid = EM28XX_BOARD_NOT_VALIDATED, 1188 .tuner_type = TUNER_XC2028, 1189 .tuner_gpio = default_tuner_gpio, 1190 }, 1191 [EM2870_BOARD_TERRATEC_XS_MT2060] = { 1192 .name = "Terratec Cinergy T XS (MT2060)", 1193 .xclk = EM28XX_XCLK_IR_RC5_MODE | 1194 EM28XX_XCLK_FREQUENCY_12MHZ, 1195 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE, 1196 .tuner_type = TUNER_ABSENT, /* MT2060 */ 1197 .has_dvb = 1, 1198 .tuner_gpio = default_tuner_gpio, 1199 }, 1200 [EM2870_BOARD_KWORLD_350U] = { 1201 .name = "Kworld 350 U DVB-T", 1202 .valid = EM28XX_BOARD_NOT_VALIDATED, 1203 .tuner_type = TUNER_XC2028, 1204 .tuner_gpio = default_tuner_gpio, 1205 }, 1206 [EM2870_BOARD_KWORLD_355U] = { 1207 .name = "Kworld 355 U DVB-T", 1208 .valid = EM28XX_BOARD_NOT_VALIDATED, 1209 .tuner_type = TUNER_ABSENT, 1210 .tuner_gpio = default_tuner_gpio, 1211 .has_dvb = 1, 1212 .dvb_gpio = default_digital, 1213 }, 1214 [EM2870_BOARD_PINNACLE_PCTV_DVB] = { 1215 .name = "Pinnacle PCTV DVB-T", 1216 .valid = EM28XX_BOARD_NOT_VALIDATED, 1217 .tuner_type = TUNER_ABSENT, /* MT2060 */ 1218 /* djh - I have serious doubts this is right... */ 1219 .xclk = EM28XX_XCLK_IR_RC5_MODE | 1220 EM28XX_XCLK_FREQUENCY_10MHZ, 1221 }, 1222 [EM2870_BOARD_COMPRO_VIDEOMATE] = { 1223 .name = "Compro, VideoMate U3", 1224 .valid = EM28XX_BOARD_NOT_VALIDATED, 1225 .tuner_type = TUNER_ABSENT, /* MT2060 */ 1226 }, 1227 1228 [EM2880_BOARD_TERRATEC_HYBRID_XS_FR] = { 1229 .name = "Terratec Hybrid XS Secam", 1230 .has_msp34xx = 1, 1231 .tuner_type = TUNER_XC2028, 1232 .tuner_gpio = default_tuner_gpio, 1233 .decoder = EM28XX_TVP5150, 1234 .has_dvb = 1, 1235 .dvb_gpio = terratec_cinergy_USB_XS_FR_digital, 1236 .input = { { 1237 .type = EM28XX_VMUX_TELEVISION, 1238 .vmux = TVP5150_COMPOSITE0, 1239 .amux = EM28XX_AMUX_VIDEO, 1240 .gpio = terratec_cinergy_USB_XS_FR_analog, 1241 }, { 1242 .type = EM28XX_VMUX_COMPOSITE, 1243 .vmux = TVP5150_COMPOSITE1, 1244 .amux = EM28XX_AMUX_LINE_IN, 1245 .gpio = terratec_cinergy_USB_XS_FR_analog, 1246 }, { 1247 .type = EM28XX_VMUX_SVIDEO, 1248 .vmux = TVP5150_SVIDEO, 1249 .amux = EM28XX_AMUX_LINE_IN, 1250 .gpio = terratec_cinergy_USB_XS_FR_analog, 1251 } }, 1252 }, 1253 [EM2884_BOARD_TERRATEC_H5] = { 1254 .name = "Terratec Cinergy H5", 1255 .has_dvb = 1, 1256#if 0 1257 .tuner_type = TUNER_PHILIPS_TDA8290, 1258 .tuner_addr = 0x41, 1259 .dvb_gpio = terratec_h5_digital, /* FIXME: probably wrong */ 1260 .tuner_gpio = terratec_h5_gpio, 1261#else 1262 .tuner_type = TUNER_ABSENT, 1263#endif 1264 .def_i2c_bus = 1, 1265 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 1266 EM28XX_I2C_FREQ_400_KHZ, 1267 }, 1268 [EM2884_BOARD_TERRATEC_H6] = { 1269 .name = "Terratec Cinergy H6 rev. 2", 1270 .has_dvb = 1, 1271 .ir_codes = RC_MAP_NEC_TERRATEC_CINERGY_XS, 1272#if 0 1273 .tuner_type = TUNER_PHILIPS_TDA8290, 1274 .tuner_addr = 0x41, 1275 .dvb_gpio = terratec_h5_digital, /* FIXME: probably wrong */ 1276 .tuner_gpio = terratec_h5_gpio, 1277#else 1278 .tuner_type = TUNER_ABSENT, 1279#endif 1280 .def_i2c_bus = 1, 1281 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 1282 EM28XX_I2C_FREQ_400_KHZ, 1283 }, 1284 [EM2884_BOARD_HAUPPAUGE_WINTV_HVR_930C] = { 1285 .name = "Hauppauge WinTV HVR 930C", 1286 .has_dvb = 1, 1287#if 0 /* FIXME: Add analog support */ 1288 .tuner_type = TUNER_XC5000, 1289 .tuner_addr = 0x41, 1290 .dvb_gpio = hauppauge_930c_digital, 1291 .tuner_gpio = hauppauge_930c_gpio, 1292#else 1293 .tuner_type = TUNER_ABSENT, 1294#endif 1295 .ir_codes = RC_MAP_HAUPPAUGE, 1296 .def_i2c_bus = 1, 1297 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 1298 EM28XX_I2C_FREQ_400_KHZ, 1299 }, 1300 [EM2884_BOARD_C3TECH_DIGITAL_DUO] = { 1301 .name = "C3 Tech Digital Duo HDTV/SDTV USB", 1302 .has_dvb = 1, 1303 /* FIXME: Add analog support - need a saa7136 driver */ 1304 .tuner_type = TUNER_ABSENT, /* Digital-only TDA18271HD */ 1305 .ir_codes = RC_MAP_EMPTY, 1306 .def_i2c_bus = 1, 1307 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE, 1308 .dvb_gpio = c3tech_digital_duo_digital, 1309 }, 1310 [EM2884_BOARD_CINERGY_HTC_STICK] = { 1311 .name = "Terratec Cinergy HTC Stick", 1312 .has_dvb = 1, 1313 .ir_codes = RC_MAP_NEC_TERRATEC_CINERGY_XS, 1314 .tuner_type = TUNER_ABSENT, 1315 .def_i2c_bus = 1, 1316 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 1317 EM28XX_I2C_FREQ_400_KHZ, 1318 }, 1319 [EM2884_BOARD_ELGATO_EYETV_HYBRID_2008] = { 1320 .name = "Elgato EyeTV Hybrid 2008 INT", 1321 .has_dvb = 1, 1322 .ir_codes = RC_MAP_NEC_TERRATEC_CINERGY_XS, 1323 .tuner_type = TUNER_ABSENT, 1324 .def_i2c_bus = 1, 1325 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 1326 EM28XX_I2C_FREQ_400_KHZ, 1327 }, 1328 [EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900] = { 1329 .name = "Hauppauge WinTV HVR 900", 1330 .tda9887_conf = TDA9887_PRESENT, 1331 .tuner_type = TUNER_XC2028, 1332 .tuner_gpio = default_tuner_gpio, 1333 .mts_firmware = 1, 1334 .has_dvb = 1, 1335 .dvb_gpio = hauppauge_wintv_hvr_900_digital, 1336 .ir_codes = RC_MAP_HAUPPAUGE, 1337 .decoder = EM28XX_TVP5150, 1338 .input = { { 1339 .type = EM28XX_VMUX_TELEVISION, 1340 .vmux = TVP5150_COMPOSITE0, 1341 .amux = EM28XX_AMUX_VIDEO, 1342 .gpio = hauppauge_wintv_hvr_900_analog, 1343 }, { 1344 .type = EM28XX_VMUX_COMPOSITE, 1345 .vmux = TVP5150_COMPOSITE1, 1346 .amux = EM28XX_AMUX_LINE_IN, 1347 .gpio = hauppauge_wintv_hvr_900_analog, 1348 }, { 1349 .type = EM28XX_VMUX_SVIDEO, 1350 .vmux = TVP5150_SVIDEO, 1351 .amux = EM28XX_AMUX_LINE_IN, 1352 .gpio = hauppauge_wintv_hvr_900_analog, 1353 } }, 1354 }, 1355 [EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2] = { 1356 .name = "Hauppauge WinTV HVR 900 (R2)", 1357 .tda9887_conf = TDA9887_PRESENT, 1358 .tuner_type = TUNER_XC2028, 1359 .tuner_gpio = default_tuner_gpio, 1360 .mts_firmware = 1, 1361 .has_dvb = 1, 1362 .dvb_gpio = hauppauge_wintv_hvr_900R2_digital, 1363 .ir_codes = RC_MAP_HAUPPAUGE, 1364 .decoder = EM28XX_TVP5150, 1365 .input = { { 1366 .type = EM28XX_VMUX_TELEVISION, 1367 .vmux = TVP5150_COMPOSITE0, 1368 .amux = EM28XX_AMUX_VIDEO, 1369 .gpio = hauppauge_wintv_hvr_900_analog, 1370 }, { 1371 .type = EM28XX_VMUX_COMPOSITE, 1372 .vmux = TVP5150_COMPOSITE1, 1373 .amux = EM28XX_AMUX_LINE_IN, 1374 .gpio = hauppauge_wintv_hvr_900_analog, 1375 }, { 1376 .type = EM28XX_VMUX_SVIDEO, 1377 .vmux = TVP5150_SVIDEO, 1378 .amux = EM28XX_AMUX_LINE_IN, 1379 .gpio = hauppauge_wintv_hvr_900_analog, 1380 } }, 1381 }, 1382 [EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850] = { 1383 .name = "Hauppauge WinTV HVR 850", 1384 .tuner_type = TUNER_XC2028, 1385 .tuner_gpio = default_tuner_gpio, 1386 .mts_firmware = 1, 1387 .has_dvb = 1, 1388 .dvb_gpio = hauppauge_wintv_hvr_900_digital, 1389 .ir_codes = RC_MAP_HAUPPAUGE, 1390 .decoder = EM28XX_TVP5150, 1391 .input = { { 1392 .type = EM28XX_VMUX_TELEVISION, 1393 .vmux = TVP5150_COMPOSITE0, 1394 .amux = EM28XX_AMUX_VIDEO, 1395 .gpio = hauppauge_wintv_hvr_900_analog, 1396 }, { 1397 .type = EM28XX_VMUX_COMPOSITE, 1398 .vmux = TVP5150_COMPOSITE1, 1399 .amux = EM28XX_AMUX_LINE_IN, 1400 .gpio = hauppauge_wintv_hvr_900_analog, 1401 }, { 1402 .type = EM28XX_VMUX_SVIDEO, 1403 .vmux = TVP5150_SVIDEO, 1404 .amux = EM28XX_AMUX_LINE_IN, 1405 .gpio = hauppauge_wintv_hvr_900_analog, 1406 } }, 1407 }, 1408 [EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950] = { 1409 .name = "Hauppauge WinTV HVR 950", 1410 .tuner_type = TUNER_XC2028, 1411 .tuner_gpio = default_tuner_gpio, 1412 .mts_firmware = 1, 1413 .has_dvb = 1, 1414 .dvb_gpio = hauppauge_wintv_hvr_900_digital, 1415 .ir_codes = RC_MAP_HAUPPAUGE, 1416 .decoder = EM28XX_TVP5150, 1417 .input = { { 1418 .type = EM28XX_VMUX_TELEVISION, 1419 .vmux = TVP5150_COMPOSITE0, 1420 .amux = EM28XX_AMUX_VIDEO, 1421 .gpio = hauppauge_wintv_hvr_900_analog, 1422 }, { 1423 .type = EM28XX_VMUX_COMPOSITE, 1424 .vmux = TVP5150_COMPOSITE1, 1425 .amux = EM28XX_AMUX_LINE_IN, 1426 .gpio = hauppauge_wintv_hvr_900_analog, 1427 }, { 1428 .type = EM28XX_VMUX_SVIDEO, 1429 .vmux = TVP5150_SVIDEO, 1430 .amux = EM28XX_AMUX_LINE_IN, 1431 .gpio = hauppauge_wintv_hvr_900_analog, 1432 } }, 1433 }, 1434 [EM2880_BOARD_PINNACLE_PCTV_HD_PRO] = { 1435 .name = "Pinnacle PCTV HD Pro Stick", 1436 .tuner_type = TUNER_XC2028, 1437 .tuner_gpio = default_tuner_gpio, 1438 .mts_firmware = 1, 1439 .has_dvb = 1, 1440 .dvb_gpio = hauppauge_wintv_hvr_900_digital, 1441 .ir_codes = RC_MAP_PINNACLE_PCTV_HD, 1442 .decoder = EM28XX_TVP5150, 1443 .input = { { 1444 .type = EM28XX_VMUX_TELEVISION, 1445 .vmux = TVP5150_COMPOSITE0, 1446 .amux = EM28XX_AMUX_VIDEO, 1447 .gpio = hauppauge_wintv_hvr_900_analog, 1448 }, { 1449 .type = EM28XX_VMUX_COMPOSITE, 1450 .vmux = TVP5150_COMPOSITE1, 1451 .amux = EM28XX_AMUX_LINE_IN, 1452 .gpio = hauppauge_wintv_hvr_900_analog, 1453 }, { 1454 .type = EM28XX_VMUX_SVIDEO, 1455 .vmux = TVP5150_SVIDEO, 1456 .amux = EM28XX_AMUX_LINE_IN, 1457 .gpio = hauppauge_wintv_hvr_900_analog, 1458 } }, 1459 }, 1460 [EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600] = { 1461 .name = "AMD ATI TV Wonder HD 600", 1462 .tuner_type = TUNER_XC2028, 1463 .tuner_gpio = default_tuner_gpio, 1464 .mts_firmware = 1, 1465 .has_dvb = 1, 1466 .dvb_gpio = hauppauge_wintv_hvr_900_digital, 1467 .ir_codes = RC_MAP_ATI_TV_WONDER_HD_600, 1468 .decoder = EM28XX_TVP5150, 1469 .input = { { 1470 .type = EM28XX_VMUX_TELEVISION, 1471 .vmux = TVP5150_COMPOSITE0, 1472 .amux = EM28XX_AMUX_VIDEO, 1473 .gpio = hauppauge_wintv_hvr_900_analog, 1474 }, { 1475 .type = EM28XX_VMUX_COMPOSITE, 1476 .vmux = TVP5150_COMPOSITE1, 1477 .amux = EM28XX_AMUX_LINE_IN, 1478 .gpio = hauppauge_wintv_hvr_900_analog, 1479 }, { 1480 .type = EM28XX_VMUX_SVIDEO, 1481 .vmux = TVP5150_SVIDEO, 1482 .amux = EM28XX_AMUX_LINE_IN, 1483 .gpio = hauppauge_wintv_hvr_900_analog, 1484 } }, 1485 }, 1486 [EM2880_BOARD_TERRATEC_HYBRID_XS] = { 1487 .name = "Terratec Hybrid XS", 1488 .tuner_type = TUNER_XC2028, 1489 .tuner_gpio = default_tuner_gpio, 1490 .decoder = EM28XX_TVP5150, 1491 .has_dvb = 1, 1492 .dvb_gpio = default_digital, 1493 .ir_codes = RC_MAP_TERRATEC_CINERGY_XS, 1494 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, /* NEC IR */ 1495 .input = { { 1496 .type = EM28XX_VMUX_TELEVISION, 1497 .vmux = TVP5150_COMPOSITE0, 1498 .amux = EM28XX_AMUX_VIDEO, 1499 .gpio = default_analog, 1500 }, { 1501 .type = EM28XX_VMUX_COMPOSITE, 1502 .vmux = TVP5150_COMPOSITE1, 1503 .amux = EM28XX_AMUX_LINE_IN, 1504 .gpio = default_analog, 1505 }, { 1506 .type = EM28XX_VMUX_SVIDEO, 1507 .vmux = TVP5150_SVIDEO, 1508 .amux = EM28XX_AMUX_LINE_IN, 1509 .gpio = default_analog, 1510 } }, 1511 }, 1512 /* 1513 * maybe there's a reason behind it why Terratec sells the Hybrid XS 1514 * as Prodigy XS with a different PID, let's keep it separated for now 1515 * maybe we'll need it later on 1516 */ 1517 [EM2880_BOARD_TERRATEC_PRODIGY_XS] = { 1518 .name = "Terratec Prodigy XS", 1519 .tuner_type = TUNER_XC2028, 1520 .tuner_gpio = default_tuner_gpio, 1521 .decoder = EM28XX_TVP5150, 1522 .input = { { 1523 .type = EM28XX_VMUX_TELEVISION, 1524 .vmux = TVP5150_COMPOSITE0, 1525 .amux = EM28XX_AMUX_VIDEO, 1526 .gpio = hauppauge_wintv_hvr_900_analog, 1527 }, { 1528 .type = EM28XX_VMUX_COMPOSITE, 1529 .vmux = TVP5150_COMPOSITE1, 1530 .amux = EM28XX_AMUX_LINE_IN, 1531 .gpio = hauppauge_wintv_hvr_900_analog, 1532 }, { 1533 .type = EM28XX_VMUX_SVIDEO, 1534 .vmux = TVP5150_SVIDEO, 1535 .amux = EM28XX_AMUX_LINE_IN, 1536 .gpio = hauppauge_wintv_hvr_900_analog, 1537 } }, 1538 }, 1539 [EM2820_BOARD_MSI_VOX_USB_2] = { 1540 .name = "MSI VOX USB 2.0", 1541 .tuner_type = TUNER_LG_PAL_NEW_TAPC, 1542 .tda9887_conf = TDA9887_PRESENT | 1543 TDA9887_PORT1_ACTIVE | 1544 TDA9887_PORT2_ACTIVE, 1545 .max_range_640_480 = 1, 1546 .decoder = EM28XX_SAA711X, 1547 .input = { { 1548 .type = EM28XX_VMUX_TELEVISION, 1549 .vmux = SAA7115_COMPOSITE4, 1550 .amux = EM28XX_AMUX_VIDEO, 1551 }, { 1552 .type = EM28XX_VMUX_COMPOSITE, 1553 .vmux = SAA7115_COMPOSITE0, 1554 .amux = EM28XX_AMUX_LINE_IN, 1555 }, { 1556 .type = EM28XX_VMUX_SVIDEO, 1557 .vmux = SAA7115_SVIDEO3, 1558 .amux = EM28XX_AMUX_LINE_IN, 1559 } }, 1560 }, 1561 [EM2800_BOARD_TERRATEC_CINERGY_200] = { 1562 .name = "Terratec Cinergy 200 USB", 1563 .is_em2800 = 1, 1564 .has_ir_i2c = 1, 1565 .tuner_type = TUNER_LG_TALN, 1566 .tda9887_conf = TDA9887_PRESENT, 1567 .decoder = EM28XX_SAA711X, 1568 .input = { { 1569 .type = EM28XX_VMUX_TELEVISION, 1570 .vmux = SAA7115_COMPOSITE2, 1571 .amux = EM28XX_AMUX_VIDEO, 1572 }, { 1573 .type = EM28XX_VMUX_COMPOSITE, 1574 .vmux = SAA7115_COMPOSITE0, 1575 .amux = EM28XX_AMUX_LINE_IN, 1576 }, { 1577 .type = EM28XX_VMUX_SVIDEO, 1578 .vmux = SAA7115_SVIDEO3, 1579 .amux = EM28XX_AMUX_LINE_IN, 1580 } }, 1581 }, 1582 [EM2800_BOARD_GRABBEEX_USB2800] = { 1583 .name = "eMPIA Technology, Inc. GrabBeeX+ Video Encoder", 1584 .is_em2800 = 1, 1585 .decoder = EM28XX_SAA711X, 1586 .tuner_type = TUNER_ABSENT, /* capture only board */ 1587 .input = { { 1588 .type = EM28XX_VMUX_COMPOSITE, 1589 .vmux = SAA7115_COMPOSITE0, 1590 .amux = EM28XX_AMUX_LINE_IN, 1591 }, { 1592 .type = EM28XX_VMUX_SVIDEO, 1593 .vmux = SAA7115_SVIDEO3, 1594 .amux = EM28XX_AMUX_LINE_IN, 1595 } }, 1596 }, 1597 [EM2800_BOARD_VC211A] = { 1598 .name = "Actionmaster/LinXcel/Digitus VC211A", 1599 .is_em2800 = 1, 1600 .tuner_type = TUNER_ABSENT, /* Capture-only board */ 1601 .decoder = EM28XX_SAA711X, 1602 .input = { { 1603 .type = EM28XX_VMUX_COMPOSITE, 1604 .vmux = SAA7115_COMPOSITE0, 1605 .amux = EM28XX_AMUX_LINE_IN, 1606 .gpio = vc211a_enable, 1607 }, { 1608 .type = EM28XX_VMUX_SVIDEO, 1609 .vmux = SAA7115_SVIDEO3, 1610 .amux = EM28XX_AMUX_LINE_IN, 1611 .gpio = vc211a_enable, 1612 } }, 1613 }, 1614 [EM2800_BOARD_LEADTEK_WINFAST_USBII] = { 1615 .name = "Leadtek Winfast USB II", 1616 .is_em2800 = 1, 1617 .tuner_type = TUNER_LG_PAL_NEW_TAPC, 1618 .tda9887_conf = TDA9887_PRESENT, 1619 .decoder = EM28XX_SAA711X, 1620 .input = { { 1621 .type = EM28XX_VMUX_TELEVISION, 1622 .vmux = SAA7115_COMPOSITE2, 1623 .amux = EM28XX_AMUX_VIDEO, 1624 }, { 1625 .type = EM28XX_VMUX_COMPOSITE, 1626 .vmux = SAA7115_COMPOSITE0, 1627 .amux = EM28XX_AMUX_LINE_IN, 1628 }, { 1629 .type = EM28XX_VMUX_SVIDEO, 1630 .vmux = SAA7115_SVIDEO3, 1631 .amux = EM28XX_AMUX_LINE_IN, 1632 } }, 1633 }, 1634 [EM2800_BOARD_KWORLD_USB2800] = { 1635 .name = "Kworld USB2800", 1636 .is_em2800 = 1, 1637 .tuner_type = TUNER_PHILIPS_FCV1236D, 1638 .tda9887_conf = TDA9887_PRESENT, 1639 .decoder = EM28XX_SAA711X, 1640 .input = { { 1641 .type = EM28XX_VMUX_TELEVISION, 1642 .vmux = SAA7115_COMPOSITE2, 1643 .amux = EM28XX_AMUX_VIDEO, 1644 }, { 1645 .type = EM28XX_VMUX_COMPOSITE, 1646 .vmux = SAA7115_COMPOSITE0, 1647 .amux = EM28XX_AMUX_LINE_IN, 1648 }, { 1649 .type = EM28XX_VMUX_SVIDEO, 1650 .vmux = SAA7115_SVIDEO3, 1651 .amux = EM28XX_AMUX_LINE_IN, 1652 } }, 1653 }, 1654 [EM2820_BOARD_PINNACLE_DVC_90] = { 1655 .name = "Pinnacle Dazzle DVC 90/100/101/107 / Kaiser Baas Video to DVD maker / Kworld DVD Maker 2 / Plextor ConvertX PX-AV100U", 1656 .tuner_type = TUNER_ABSENT, /* capture only board */ 1657 .decoder = EM28XX_SAA711X, 1658 .input = { { 1659 .type = EM28XX_VMUX_COMPOSITE, 1660 .vmux = SAA7115_COMPOSITE0, 1661 .amux = EM28XX_AMUX_LINE_IN, 1662 }, { 1663 .type = EM28XX_VMUX_SVIDEO, 1664 .vmux = SAA7115_SVIDEO3, 1665 .amux = EM28XX_AMUX_LINE_IN, 1666 } }, 1667 }, 1668 [EM2800_BOARD_VGEAR_POCKETTV] = { 1669 .name = "V-Gear PocketTV", 1670 .is_em2800 = 1, 1671 .tuner_type = TUNER_LG_PAL_NEW_TAPC, 1672 .tda9887_conf = TDA9887_PRESENT, 1673 .decoder = EM28XX_SAA711X, 1674 .input = { { 1675 .type = EM28XX_VMUX_TELEVISION, 1676 .vmux = SAA7115_COMPOSITE2, 1677 .amux = EM28XX_AMUX_VIDEO, 1678 }, { 1679 .type = EM28XX_VMUX_COMPOSITE, 1680 .vmux = SAA7115_COMPOSITE0, 1681 .amux = EM28XX_AMUX_LINE_IN, 1682 }, { 1683 .type = EM28XX_VMUX_SVIDEO, 1684 .vmux = SAA7115_SVIDEO3, 1685 .amux = EM28XX_AMUX_LINE_IN, 1686 } }, 1687 }, 1688 [EM2820_BOARD_PROLINK_PLAYTV_BOX4_USB2] = { 1689 .name = "Pixelview PlayTV Box 4 USB 2.0", 1690 .tda9887_conf = TDA9887_PRESENT, 1691 .tuner_type = TUNER_YMEC_TVF_5533MF, 1692 .decoder = EM28XX_SAA711X, 1693 .input = { { 1694 .type = EM28XX_VMUX_TELEVISION, 1695 .vmux = SAA7115_COMPOSITE2, 1696 .amux = EM28XX_AMUX_VIDEO, 1697 .aout = EM28XX_AOUT_MONO | /* I2S */ 1698 EM28XX_AOUT_MASTER, /* Line out pin */ 1699 }, { 1700 .type = EM28XX_VMUX_COMPOSITE, 1701 .vmux = SAA7115_COMPOSITE0, 1702 .amux = EM28XX_AMUX_LINE_IN, 1703 }, { 1704 .type = EM28XX_VMUX_SVIDEO, 1705 .vmux = SAA7115_SVIDEO3, 1706 .amux = EM28XX_AMUX_LINE_IN, 1707 } }, 1708 }, 1709 [EM2820_BOARD_PROLINK_PLAYTV_USB2] = { 1710 .name = "SIIG AVTuner-PVR / Pixelview Prolink PlayTV USB 2.0", 1711 .buttons = std_snapshot_button, 1712 .tda9887_conf = TDA9887_PRESENT, 1713 .tuner_type = TUNER_YMEC_TVF_5533MF, 1714 .tuner_addr = 0x60, 1715 .decoder = EM28XX_SAA711X, 1716 .input = { { 1717 .type = EM28XX_VMUX_TELEVISION, 1718 .vmux = SAA7115_COMPOSITE2, 1719 .amux = EM28XX_AMUX_VIDEO, 1720 .aout = EM28XX_AOUT_MONO | /* I2S */ 1721 EM28XX_AOUT_MASTER, /* Line out pin */ 1722 }, { 1723 .type = EM28XX_VMUX_COMPOSITE, 1724 .vmux = SAA7115_COMPOSITE0, 1725 .amux = EM28XX_AMUX_LINE_IN, 1726 }, { 1727 .type = EM28XX_VMUX_SVIDEO, 1728 .vmux = SAA7115_SVIDEO3, 1729 .amux = EM28XX_AMUX_LINE_IN, 1730 } }, 1731 }, 1732 [EM2860_BOARD_SAA711X_REFERENCE_DESIGN] = { 1733 .name = "EM2860/SAA711X Reference Design", 1734 .buttons = std_snapshot_button, 1735 .tuner_type = TUNER_ABSENT, 1736 .decoder = EM28XX_SAA711X, 1737 .input = { { 1738 .type = EM28XX_VMUX_SVIDEO, 1739 .vmux = SAA7115_SVIDEO3, 1740 }, { 1741 .type = EM28XX_VMUX_COMPOSITE, 1742 .vmux = SAA7115_COMPOSITE0, 1743 } }, 1744 }, 1745 1746 [EM2874_BOARD_LEADERSHIP_ISDBT] = { 1747 .def_i2c_bus = 1, 1748 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 1749 EM28XX_I2C_FREQ_100_KHZ, 1750 .xclk = EM28XX_XCLK_FREQUENCY_10MHZ, 1751 .name = "EM2874 Leadership ISDBT", 1752 .tuner_type = TUNER_ABSENT, 1753 .tuner_gpio = leadership_reset, 1754 .dvb_gpio = leadership_digital, 1755 .has_dvb = 1, 1756 }, 1757 1758 [EM2880_BOARD_MSI_DIGIVOX_AD] = { 1759 .name = "MSI DigiVox A/D", 1760 .valid = EM28XX_BOARD_NOT_VALIDATED, 1761 .tuner_type = TUNER_XC2028, 1762 .tuner_gpio = default_tuner_gpio, 1763 .decoder = EM28XX_TVP5150, 1764 .input = { { 1765 .type = EM28XX_VMUX_TELEVISION, 1766 .vmux = TVP5150_COMPOSITE0, 1767 .amux = EM28XX_AMUX_VIDEO, 1768 .gpio = em2880_msi_digivox_ad_analog, 1769 }, { 1770 .type = EM28XX_VMUX_COMPOSITE, 1771 .vmux = TVP5150_COMPOSITE1, 1772 .amux = EM28XX_AMUX_LINE_IN, 1773 .gpio = em2880_msi_digivox_ad_analog, 1774 }, { 1775 .type = EM28XX_VMUX_SVIDEO, 1776 .vmux = TVP5150_SVIDEO, 1777 .amux = EM28XX_AMUX_LINE_IN, 1778 .gpio = em2880_msi_digivox_ad_analog, 1779 } }, 1780 }, 1781 [EM2880_BOARD_MSI_DIGIVOX_AD_II] = { 1782 .name = "MSI DigiVox A/D II", 1783 .valid = EM28XX_BOARD_NOT_VALIDATED, 1784 .tuner_type = TUNER_XC2028, 1785 .tuner_gpio = default_tuner_gpio, 1786 .decoder = EM28XX_TVP5150, 1787 .input = { { 1788 .type = EM28XX_VMUX_TELEVISION, 1789 .vmux = TVP5150_COMPOSITE0, 1790 .amux = EM28XX_AMUX_VIDEO, 1791 .gpio = em2880_msi_digivox_ad_analog, 1792 }, { 1793 .type = EM28XX_VMUX_COMPOSITE, 1794 .vmux = TVP5150_COMPOSITE1, 1795 .amux = EM28XX_AMUX_LINE_IN, 1796 .gpio = em2880_msi_digivox_ad_analog, 1797 }, { 1798 .type = EM28XX_VMUX_SVIDEO, 1799 .vmux = TVP5150_SVIDEO, 1800 .amux = EM28XX_AMUX_LINE_IN, 1801 .gpio = em2880_msi_digivox_ad_analog, 1802 } }, 1803 }, 1804 [EM2880_BOARD_KWORLD_DVB_305U] = { 1805 .name = "KWorld DVB-T 305U", 1806 .tuner_type = TUNER_XC2028, 1807 .tuner_gpio = default_tuner_gpio, 1808 .decoder = EM28XX_TVP5150, 1809 .input = { { 1810 .type = EM28XX_VMUX_TELEVISION, 1811 .vmux = TVP5150_COMPOSITE0, 1812 .amux = EM28XX_AMUX_VIDEO, 1813 }, { 1814 .type = EM28XX_VMUX_COMPOSITE, 1815 .vmux = TVP5150_COMPOSITE1, 1816 .amux = EM28XX_AMUX_LINE_IN, 1817 }, { 1818 .type = EM28XX_VMUX_SVIDEO, 1819 .vmux = TVP5150_SVIDEO, 1820 .amux = EM28XX_AMUX_LINE_IN, 1821 } }, 1822 }, 1823 [EM2880_BOARD_KWORLD_DVB_310U] = { 1824 .name = "KWorld DVB-T 310U", 1825 .tuner_type = TUNER_XC2028, 1826 .tuner_gpio = default_tuner_gpio, 1827 .has_dvb = 1, 1828 .dvb_gpio = default_digital, 1829 .mts_firmware = 1, 1830 .decoder = EM28XX_TVP5150, 1831 .input = { { 1832 .type = EM28XX_VMUX_TELEVISION, 1833 .vmux = TVP5150_COMPOSITE0, 1834 .amux = EM28XX_AMUX_VIDEO, 1835 .gpio = default_analog, 1836 }, { 1837 .type = EM28XX_VMUX_COMPOSITE, 1838 .vmux = TVP5150_COMPOSITE1, 1839 .amux = EM28XX_AMUX_LINE_IN, 1840 .gpio = default_analog, 1841 }, { /* S-video has not been tested yet */ 1842 .type = EM28XX_VMUX_SVIDEO, 1843 .vmux = TVP5150_SVIDEO, 1844 .amux = EM28XX_AMUX_LINE_IN, 1845 .gpio = default_analog, 1846 } }, 1847 }, 1848 [EM2882_BOARD_KWORLD_ATSC_315U] = { 1849 .name = "KWorld ATSC 315U HDTV TV Box", 1850 .valid = EM28XX_BOARD_NOT_VALIDATED, 1851 .tuner_type = TUNER_THOMSON_DTT761X, 1852 .tuner_gpio = em2882_kworld_315u_tuner_gpio, 1853 .tda9887_conf = TDA9887_PRESENT, 1854 .decoder = EM28XX_SAA711X, 1855 .has_dvb = 1, 1856 .dvb_gpio = em2882_kworld_315u_digital, 1857 .ir_codes = RC_MAP_KWORLD_315U, 1858 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, 1859 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE, 1860#if 0 1861 /* FIXME: Analog mode - still not ready */ 1862 .input = { { 1863 .type = EM28XX_VMUX_TELEVISION, 1864 .vmux = SAA7115_COMPOSITE2, 1865 .amux = EM28XX_AMUX_VIDEO, 1866 .gpio = em2882_kworld_315u_analog, 1867 .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO, 1868 }, { 1869 .type = EM28XX_VMUX_COMPOSITE, 1870 .vmux = SAA7115_COMPOSITE0, 1871 .amux = EM28XX_AMUX_LINE_IN, 1872 .gpio = em2882_kworld_315u_analog1, 1873 .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO, 1874 }, { 1875 .type = EM28XX_VMUX_SVIDEO, 1876 .vmux = SAA7115_SVIDEO3, 1877 .amux = EM28XX_AMUX_LINE_IN, 1878 .gpio = em2882_kworld_315u_analog1, 1879 .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO, 1880 } }, 1881#endif 1882 }, 1883 [EM2880_BOARD_EMPIRE_DUAL_TV] = { 1884 .name = "Empire dual TV", 1885 .tuner_type = TUNER_XC2028, 1886 .tuner_gpio = default_tuner_gpio, 1887 .has_dvb = 1, 1888 .dvb_gpio = default_digital, 1889 .mts_firmware = 1, 1890 .decoder = EM28XX_TVP5150, 1891 .input = { { 1892 .type = EM28XX_VMUX_TELEVISION, 1893 .vmux = TVP5150_COMPOSITE0, 1894 .amux = EM28XX_AMUX_VIDEO, 1895 .gpio = default_analog, 1896 }, { 1897 .type = EM28XX_VMUX_COMPOSITE, 1898 .vmux = TVP5150_COMPOSITE1, 1899 .amux = EM28XX_AMUX_LINE_IN, 1900 .gpio = default_analog, 1901 }, { 1902 .type = EM28XX_VMUX_SVIDEO, 1903 .vmux = TVP5150_SVIDEO, 1904 .amux = EM28XX_AMUX_LINE_IN, 1905 .gpio = default_analog, 1906 } }, 1907 }, 1908 [EM2881_BOARD_DNT_DA2_HYBRID] = { 1909 .name = "DNT DA2 Hybrid", 1910 .valid = EM28XX_BOARD_NOT_VALIDATED, 1911 .tuner_type = TUNER_XC2028, 1912 .tuner_gpio = default_tuner_gpio, 1913 .decoder = EM28XX_TVP5150, 1914 .input = { { 1915 .type = EM28XX_VMUX_TELEVISION, 1916 .vmux = TVP5150_COMPOSITE0, 1917 .amux = EM28XX_AMUX_VIDEO, 1918 .gpio = default_analog, 1919 }, { 1920 .type = EM28XX_VMUX_COMPOSITE, 1921 .vmux = TVP5150_COMPOSITE1, 1922 .amux = EM28XX_AMUX_LINE_IN, 1923 .gpio = default_analog, 1924 }, { 1925 .type = EM28XX_VMUX_SVIDEO, 1926 .vmux = TVP5150_SVIDEO, 1927 .amux = EM28XX_AMUX_LINE_IN, 1928 .gpio = default_analog, 1929 } }, 1930 }, 1931 [EM2881_BOARD_PINNACLE_HYBRID_PRO] = { 1932 .name = "Pinnacle Hybrid Pro", 1933 .tuner_type = TUNER_XC2028, 1934 .tuner_gpio = default_tuner_gpio, 1935 .decoder = EM28XX_TVP5150, 1936 .has_dvb = 1, 1937 .dvb_gpio = pinnacle_hybrid_pro_digital, 1938 .input = { { 1939 .type = EM28XX_VMUX_TELEVISION, 1940 .vmux = TVP5150_COMPOSITE0, 1941 .amux = EM28XX_AMUX_VIDEO, 1942 .gpio = pinnacle_hybrid_pro_analog, 1943 }, { 1944 .type = EM28XX_VMUX_COMPOSITE, 1945 .vmux = TVP5150_COMPOSITE1, 1946 .amux = EM28XX_AMUX_LINE_IN, 1947 .gpio = pinnacle_hybrid_pro_analog, 1948 }, { 1949 .type = EM28XX_VMUX_SVIDEO, 1950 .vmux = TVP5150_SVIDEO, 1951 .amux = EM28XX_AMUX_LINE_IN, 1952 .gpio = pinnacle_hybrid_pro_analog, 1953 } }, 1954 }, 1955 [EM2882_BOARD_PINNACLE_HYBRID_PRO_330E] = { 1956 .name = "Pinnacle Hybrid Pro (330e)", 1957 .tuner_type = TUNER_XC2028, 1958 .tuner_gpio = default_tuner_gpio, 1959 .mts_firmware = 1, 1960 .has_dvb = 1, 1961 .dvb_gpio = hauppauge_wintv_hvr_900R2_digital, 1962 .ir_codes = RC_MAP_PINNACLE_PCTV_HD, 1963 .decoder = EM28XX_TVP5150, 1964 .input = { { 1965 .type = EM28XX_VMUX_TELEVISION, 1966 .vmux = TVP5150_COMPOSITE0, 1967 .amux = EM28XX_AMUX_VIDEO, 1968 .gpio = hauppauge_wintv_hvr_900_analog, 1969 }, { 1970 .type = EM28XX_VMUX_COMPOSITE, 1971 .vmux = TVP5150_COMPOSITE1, 1972 .amux = EM28XX_AMUX_LINE_IN, 1973 .gpio = hauppauge_wintv_hvr_900_analog, 1974 }, { 1975 .type = EM28XX_VMUX_SVIDEO, 1976 .vmux = TVP5150_SVIDEO, 1977 .amux = EM28XX_AMUX_LINE_IN, 1978 .gpio = hauppauge_wintv_hvr_900_analog, 1979 } }, 1980 }, 1981 [EM2882_BOARD_KWORLD_VS_DVBT] = { 1982 .name = "Kworld VS-DVB-T 323UR", 1983 .tuner_type = TUNER_XC2028, 1984 .tuner_gpio = default_tuner_gpio, 1985 .decoder = EM28XX_TVP5150, 1986 .mts_firmware = 1, 1987 .has_dvb = 1, 1988 .dvb_gpio = kworld_330u_digital, 1989 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, /* NEC IR */ 1990 .ir_codes = RC_MAP_KWORLD_315U, 1991 .input = { { 1992 .type = EM28XX_VMUX_TELEVISION, 1993 .vmux = TVP5150_COMPOSITE0, 1994 .amux = EM28XX_AMUX_VIDEO, 1995 }, { 1996 .type = EM28XX_VMUX_COMPOSITE, 1997 .vmux = TVP5150_COMPOSITE1, 1998 .amux = EM28XX_AMUX_LINE_IN, 1999 }, { 2000 .type = EM28XX_VMUX_SVIDEO, 2001 .vmux = TVP5150_SVIDEO, 2002 .amux = EM28XX_AMUX_LINE_IN, 2003 } }, 2004 }, 2005 [EM2882_BOARD_TERRATEC_HYBRID_XS] = { 2006 .name = "Terratec Cinergy Hybrid T USB XS (em2882)", 2007 .tuner_type = TUNER_XC2028, 2008 .tuner_gpio = default_tuner_gpio, 2009 .mts_firmware = 1, 2010 .decoder = EM28XX_TVP5150, 2011 .has_dvb = 1, 2012 .dvb_gpio = hauppauge_wintv_hvr_900_digital, 2013 .ir_codes = RC_MAP_TERRATEC_CINERGY_XS, 2014 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, 2015 .input = { { 2016 .type = EM28XX_VMUX_TELEVISION, 2017 .vmux = TVP5150_COMPOSITE0, 2018 .amux = EM28XX_AMUX_VIDEO, 2019 .gpio = hauppauge_wintv_hvr_900_analog, 2020 }, { 2021 .type = EM28XX_VMUX_COMPOSITE, 2022 .vmux = TVP5150_COMPOSITE1, 2023 .amux = EM28XX_AMUX_LINE_IN, 2024 .gpio = hauppauge_wintv_hvr_900_analog, 2025 }, { 2026 .type = EM28XX_VMUX_SVIDEO, 2027 .vmux = TVP5150_SVIDEO, 2028 .amux = EM28XX_AMUX_LINE_IN, 2029 .gpio = hauppauge_wintv_hvr_900_analog, 2030 } }, 2031 }, 2032 [EM2882_BOARD_DIKOM_DK300] = { 2033 .name = "Dikom DK300", 2034 .tuner_type = TUNER_XC2028, 2035 .tuner_gpio = default_tuner_gpio, 2036 .decoder = EM28XX_TVP5150, 2037 .mts_firmware = 1, 2038 .has_dvb = 1, 2039 .dvb_gpio = dikom_dk300_digital, 2040 .input = { { 2041 .type = EM28XX_VMUX_TELEVISION, 2042 .vmux = TVP5150_COMPOSITE0, 2043 .amux = EM28XX_AMUX_VIDEO, 2044 .gpio = default_analog, 2045 } }, 2046 }, 2047 [EM2883_BOARD_KWORLD_HYBRID_330U] = { 2048 .name = "Kworld PlusTV HD Hybrid 330", 2049 .tuner_type = TUNER_XC2028, 2050 .tuner_gpio = default_tuner_gpio, 2051 .decoder = EM28XX_TVP5150, 2052 .mts_firmware = 1, 2053 .has_dvb = 1, 2054 .dvb_gpio = kworld_330u_digital, 2055 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, 2056 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 2057 EM28XX_I2C_EEPROM_ON_BOARD | 2058 EM28XX_I2C_EEPROM_KEY_VALID, 2059 .input = { { 2060 .type = EM28XX_VMUX_TELEVISION, 2061 .vmux = TVP5150_COMPOSITE0, 2062 .amux = EM28XX_AMUX_VIDEO, 2063 .gpio = kworld_330u_analog, 2064 .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO, 2065 }, { 2066 .type = EM28XX_VMUX_COMPOSITE, 2067 .vmux = TVP5150_COMPOSITE1, 2068 .amux = EM28XX_AMUX_LINE_IN, 2069 .gpio = kworld_330u_analog, 2070 .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO, 2071 }, { 2072 .type = EM28XX_VMUX_SVIDEO, 2073 .vmux = TVP5150_SVIDEO, 2074 .amux = EM28XX_AMUX_LINE_IN, 2075 .gpio = kworld_330u_analog, 2076 } }, 2077 }, 2078 [EM2820_BOARD_COMPRO_VIDEOMATE_FORYOU] = { 2079 .name = "Compro VideoMate ForYou/Stereo", 2080 .tuner_type = TUNER_LG_PAL_NEW_TAPC, 2081 .tvaudio_addr = 0xb0, 2082 .tda9887_conf = TDA9887_PRESENT, 2083 .decoder = EM28XX_TVP5150, 2084 .adecoder = EM28XX_TVAUDIO, 2085 .mute_gpio = compro_mute_gpio, 2086 .input = { { 2087 .type = EM28XX_VMUX_TELEVISION, 2088 .vmux = TVP5150_COMPOSITE0, 2089 .amux = EM28XX_AMUX_VIDEO, 2090 .gpio = compro_unmute_tv_gpio, 2091 }, { 2092 .type = EM28XX_VMUX_SVIDEO, 2093 .vmux = TVP5150_SVIDEO, 2094 .amux = EM28XX_AMUX_LINE_IN, 2095 .gpio = compro_unmute_svid_gpio, 2096 } }, 2097 }, 2098 [EM2860_BOARD_KAIOMY_TVNPC_U2] = { 2099 .name = "Kaiomy TVnPC U2", 2100 .vchannels = 3, 2101 .tuner_type = TUNER_XC2028, 2102 .tuner_addr = 0x61, 2103 .mts_firmware = 1, 2104 .decoder = EM28XX_TVP5150, 2105 .tuner_gpio = default_tuner_gpio, 2106 .ir_codes = RC_MAP_KAIOMY, 2107 .input = { { 2108 .type = EM28XX_VMUX_TELEVISION, 2109 .vmux = TVP5150_COMPOSITE0, 2110 .amux = EM28XX_AMUX_VIDEO, 2111 2112 }, { 2113 .type = EM28XX_VMUX_COMPOSITE, 2114 .vmux = TVP5150_COMPOSITE1, 2115 .amux = EM28XX_AMUX_LINE_IN, 2116 }, { 2117 .type = EM28XX_VMUX_SVIDEO, 2118 .vmux = TVP5150_SVIDEO, 2119 .amux = EM28XX_AMUX_LINE_IN, 2120 } }, 2121 .radio = { 2122 .type = EM28XX_RADIO, 2123 .amux = EM28XX_AMUX_LINE_IN, 2124 } 2125 }, 2126 [EM2860_BOARD_EASYCAP] = { 2127 .name = "Easy Cap Capture DC-60", 2128 .vchannels = 2, 2129 .tuner_type = TUNER_ABSENT, 2130 .decoder = EM28XX_SAA711X, 2131 .input = { { 2132 .type = EM28XX_VMUX_COMPOSITE, 2133 .vmux = SAA7115_COMPOSITE0, 2134 .amux = EM28XX_AMUX_LINE_IN, 2135 }, { 2136 .type = EM28XX_VMUX_SVIDEO, 2137 .vmux = SAA7115_SVIDEO3, 2138 .amux = EM28XX_AMUX_LINE_IN, 2139 } }, 2140 }, 2141 [EM2820_BOARD_IODATA_GVMVP_SZ] = { 2142 .name = "IO-DATA GV-MVP/SZ", 2143 .tuner_type = TUNER_PHILIPS_FM1236_MK3, 2144 .tuner_gpio = default_tuner_gpio, 2145 .tda9887_conf = TDA9887_PRESENT, 2146 .decoder = EM28XX_TVP5150, 2147 .input = { { 2148 .type = EM28XX_VMUX_TELEVISION, 2149 .vmux = TVP5150_COMPOSITE0, 2150 .amux = EM28XX_AMUX_VIDEO, 2151 }, { /* Composite has not been tested yet */ 2152 .type = EM28XX_VMUX_COMPOSITE, 2153 .vmux = TVP5150_COMPOSITE1, 2154 .amux = EM28XX_AMUX_VIDEO, 2155 }, { /* S-video has not been tested yet */ 2156 .type = EM28XX_VMUX_SVIDEO, 2157 .vmux = TVP5150_SVIDEO, 2158 .amux = EM28XX_AMUX_VIDEO, 2159 } }, 2160 }, 2161 [EM2860_BOARD_TERRATEC_GRABBY] = { 2162 .name = "Terratec Grabby", 2163 .vchannels = 2, 2164 .tuner_type = TUNER_ABSENT, 2165 .decoder = EM28XX_SAA711X, 2166 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, 2167 .input = { { 2168 .type = EM28XX_VMUX_COMPOSITE, 2169 .vmux = SAA7115_COMPOSITE0, 2170 .amux = EM28XX_AMUX_LINE_IN, 2171 }, { 2172 .type = EM28XX_VMUX_SVIDEO, 2173 .vmux = SAA7115_SVIDEO3, 2174 .amux = EM28XX_AMUX_LINE_IN, 2175 } }, 2176 .buttons = std_snapshot_button, 2177 .leds = terratec_grabby_leds, 2178 }, 2179 [EM2860_BOARD_TERRATEC_AV350] = { 2180 .name = "Terratec AV350", 2181 .vchannels = 2, 2182 .tuner_type = TUNER_ABSENT, 2183 .decoder = EM28XX_TVP5150, 2184 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, 2185 .mute_gpio = terratec_av350_mute_gpio, 2186 .input = { { 2187 .type = EM28XX_VMUX_COMPOSITE, 2188 .vmux = TVP5150_COMPOSITE1, 2189 .amux = EM28XX_AMUX_LINE_IN, 2190 .gpio = terratec_av350_unmute_gpio, 2191 2192 }, { 2193 .type = EM28XX_VMUX_SVIDEO, 2194 .vmux = TVP5150_SVIDEO, 2195 .amux = EM28XX_AMUX_LINE_IN, 2196 .gpio = terratec_av350_unmute_gpio, 2197 } }, 2198 }, 2199 2200 [EM2860_BOARD_ELGATO_VIDEO_CAPTURE] = { 2201 .name = "Elgato Video Capture", 2202 .decoder = EM28XX_SAA711X, 2203 .tuner_type = TUNER_ABSENT, /* Capture only device */ 2204 .input = { { 2205 .type = EM28XX_VMUX_COMPOSITE, 2206 .vmux = SAA7115_COMPOSITE0, 2207 .amux = EM28XX_AMUX_LINE_IN, 2208 }, { 2209 .type = EM28XX_VMUX_SVIDEO, 2210 .vmux = SAA7115_SVIDEO3, 2211 .amux = EM28XX_AMUX_LINE_IN, 2212 } }, 2213 }, 2214 2215 [EM2882_BOARD_EVGA_INDTUBE] = { 2216 .name = "Evga inDtube", 2217 .tuner_type = TUNER_XC2028, 2218 .tuner_gpio = default_tuner_gpio, 2219 .decoder = EM28XX_TVP5150, 2220 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, /* NEC IR */ 2221 .mts_firmware = 1, 2222 .has_dvb = 1, 2223 .dvb_gpio = evga_indtube_digital, 2224 .ir_codes = RC_MAP_EVGA_INDTUBE, 2225 .input = { { 2226 .type = EM28XX_VMUX_TELEVISION, 2227 .vmux = TVP5150_COMPOSITE0, 2228 .amux = EM28XX_AMUX_VIDEO, 2229 .gpio = evga_indtube_analog, 2230 }, { 2231 .type = EM28XX_VMUX_COMPOSITE, 2232 .vmux = TVP5150_COMPOSITE1, 2233 .amux = EM28XX_AMUX_LINE_IN, 2234 .gpio = evga_indtube_analog, 2235 }, { 2236 .type = EM28XX_VMUX_SVIDEO, 2237 .vmux = TVP5150_SVIDEO, 2238 .amux = EM28XX_AMUX_LINE_IN, 2239 .gpio = evga_indtube_analog, 2240 } }, 2241 }, 2242 /* 2243 * eb1a:2868 Empia EM2870 + Philips CU1216L NIM 2244 * (Philips TDA10023 + Infineon TUA6034) 2245 */ 2246 [EM2870_BOARD_REDDO_DVB_C_USB_BOX] = { 2247 .name = "Reddo DVB-C USB TV Box", 2248 .tuner_type = TUNER_ABSENT, 2249 .tuner_gpio = reddo_dvb_c_usb_box, 2250 .has_dvb = 1, 2251 }, 2252 /* 2253 * 1b80:a340 - Empia EM2870, NXP TDA18271HD and LG DT3304, sold 2254 * initially as the KWorld PlusTV 340U, then as the UB435-Q. 2255 * Early variants have a TDA18271HD/C1, later ones a TDA18271HD/C2 2256 */ 2257 [EM2870_BOARD_KWORLD_A340] = { 2258 .name = "KWorld PlusTV 340U or UB435-Q (ATSC)", 2259 .tuner_type = TUNER_ABSENT, /* Digital-only TDA18271HD */ 2260 .has_dvb = 1, 2261 .dvb_gpio = kworld_a340_digital, 2262 .tuner_gpio = default_tuner_gpio, 2263 }, 2264 /* 2265 * 2013:024f PCTV nanoStick T2 290e. 2266 * Empia EM28174, Sony CXD2820R and NXP TDA18271HD/C2 2267 */ 2268 [EM28174_BOARD_PCTV_290E] = { 2269 .name = "PCTV nanoStick T2 290e", 2270 .def_i2c_bus = 1, 2271 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 2272 EM28XX_I2C_FREQ_100_KHZ, 2273 .tuner_type = TUNER_ABSENT, 2274 .tuner_gpio = pctv_290e, 2275 .has_dvb = 1, 2276 .ir_codes = RC_MAP_PINNACLE_PCTV_HD, 2277 }, 2278 /* 2279 * 2013:024f PCTV DVB-S2 Stick 460e 2280 * Empia EM28174, NXP TDA10071, Conexant CX24118A and Allegro A8293 2281 */ 2282 [EM28174_BOARD_PCTV_460E] = { 2283 .def_i2c_bus = 1, 2284 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 2285 EM28XX_I2C_FREQ_400_KHZ, 2286 .name = "PCTV DVB-S2 Stick (460e)", 2287 .tuner_type = TUNER_ABSENT, 2288 .tuner_gpio = pctv_460e, 2289 .has_dvb = 1, 2290 .ir_codes = RC_MAP_PINNACLE_PCTV_HD, 2291 }, 2292 /* 2293 * eb1a:5006 Honestech VIDBOX NW03 2294 * Empia EM2860, Philips SAA7113, Empia EMP202, No Tuner 2295 */ 2296 [EM2860_BOARD_HT_VIDBOX_NW03] = { 2297 .name = "Honestech Vidbox NW03", 2298 .tuner_type = TUNER_ABSENT, 2299 .decoder = EM28XX_SAA711X, 2300 .input = { { 2301 .type = EM28XX_VMUX_COMPOSITE, 2302 .vmux = SAA7115_COMPOSITE0, 2303 .amux = EM28XX_AMUX_LINE_IN, 2304 }, { 2305 .type = EM28XX_VMUX_SVIDEO, 2306 .vmux = SAA7115_SVIDEO3, /* S-VIDEO needs check */ 2307 .amux = EM28XX_AMUX_LINE_IN, 2308 } }, 2309 }, 2310 /* 2311 * 1b80:e425 MaxMedia UB425-TC 2312 * Empia EM2874B + Micronas DRX 3913KA2 + NXP TDA18271HDC2 2313 */ 2314 [EM2874_BOARD_MAXMEDIA_UB425_TC] = { 2315 .name = "MaxMedia UB425-TC", 2316 .tuner_type = TUNER_ABSENT, 2317 .tuner_gpio = maxmedia_ub425_tc, 2318 .has_dvb = 1, 2319 .ir_codes = RC_MAP_REDDO, 2320 .def_i2c_bus = 1, 2321 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 2322 EM28XX_I2C_FREQ_400_KHZ, 2323 }, 2324 /* 2325 * 2304:0242 PCTV QuatroStick (510e) 2326 * Empia EM2884 + Micronas DRX 3926K + NXP TDA18271HDC2 2327 */ 2328 [EM2884_BOARD_PCTV_510E] = { 2329 .name = "PCTV QuatroStick (510e)", 2330 .tuner_type = TUNER_ABSENT, 2331 .tuner_gpio = pctv_510e, 2332 .has_dvb = 1, 2333 .ir_codes = RC_MAP_PINNACLE_PCTV_HD, 2334 .def_i2c_bus = 1, 2335 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 2336 EM28XX_I2C_FREQ_400_KHZ, 2337 }, 2338 /* 2339 * 2013:0251 PCTV QuatroStick nano (520e) 2340 * Empia EM2884 + Micronas DRX 3926K + NXP TDA18271HDC2 2341 */ 2342 [EM2884_BOARD_PCTV_520E] = { 2343 .name = "PCTV QuatroStick nano (520e)", 2344 .tuner_type = TUNER_ABSENT, 2345 .tuner_gpio = pctv_520e, 2346 .has_dvb = 1, 2347 .ir_codes = RC_MAP_PINNACLE_PCTV_HD, 2348 .def_i2c_bus = 1, 2349 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 2350 EM28XX_I2C_FREQ_400_KHZ, 2351 }, 2352 [EM2884_BOARD_TERRATEC_HTC_USB_XS] = { 2353 .name = "Terratec Cinergy HTC USB XS", 2354 .has_dvb = 1, 2355 .ir_codes = RC_MAP_NEC_TERRATEC_CINERGY_XS, 2356 .tuner_type = TUNER_ABSENT, 2357 .def_i2c_bus = 1, 2358 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 2359 EM28XX_I2C_FREQ_400_KHZ, 2360 }, 2361 /* 2362 * 1b80:e1cc Delock 61959 2363 * Empia EM2874B + Micronas DRX 3913KA2 + NXP TDA18271HDC2 2364 * mostly the same as MaxMedia UB-425-TC but different remote 2365 */ 2366 [EM2874_BOARD_DELOCK_61959] = { 2367 .name = "Delock 61959", 2368 .tuner_type = TUNER_ABSENT, 2369 .tuner_gpio = maxmedia_ub425_tc, 2370 .has_dvb = 1, 2371 .ir_codes = RC_MAP_DELOCK_61959, 2372 .def_i2c_bus = 1, 2373 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 2374 EM28XX_I2C_FREQ_400_KHZ, 2375 }, 2376 /* 2377 * 1b80:e346 KWorld USB ATSC TV Stick UB435-Q V2 2378 * Empia EM2874B + LG DT3305 + NXP TDA18271HDC2 2379 */ 2380 [EM2874_BOARD_KWORLD_UB435Q_V2] = { 2381 .name = "KWorld USB ATSC TV Stick UB435-Q V2", 2382 .tuner_type = TUNER_ABSENT, 2383 .has_dvb = 1, 2384 .dvb_gpio = kworld_a340_digital, 2385 .tuner_gpio = default_tuner_gpio, 2386 .def_i2c_bus = 1, 2387 }, 2388 /* 2389 * 1b80:e34c KWorld USB ATSC TV Stick UB435-Q V3 2390 * Empia EM2874B + LG DT3305 + NXP TDA18271HDC2 2391 */ 2392 [EM2874_BOARD_KWORLD_UB435Q_V3] = { 2393 .name = "KWorld USB ATSC TV Stick UB435-Q V3", 2394 .tuner_type = TUNER_ABSENT, 2395 .has_dvb = 1, 2396 .tuner_gpio = kworld_ub435q_v3_digital, 2397 .def_i2c_bus = 1, 2398 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 2399 EM28XX_I2C_FREQ_100_KHZ, 2400 .leds = kworld_ub435q_v3_leds, 2401 }, 2402 [EM2874_BOARD_PCTV_HD_MINI_80E] = { 2403 .name = "Pinnacle PCTV HD Mini", 2404 .tuner_type = TUNER_ABSENT, 2405 .has_dvb = 1, 2406 .dvb_gpio = em2874_pctv_80e_digital, 2407 .decoder = EM28XX_NODECODER, 2408 .ir_codes = RC_MAP_PINNACLE_PCTV_HD, 2409 .leds = pctv_80e_leds, 2410 }, 2411 /* 2412 * 1ae7:9003/9004 SpeedLink Vicious And Devine Laplace webcam 2413 * Empia EM2765 + OmniVision OV2640 2414 */ 2415 [EM2765_BOARD_SPEEDLINK_VAD_LAPLACE] = { 2416 .name = "SpeedLink Vicious And Devine Laplace webcam", 2417 .xclk = EM28XX_XCLK_FREQUENCY_24MHZ, 2418 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 2419 EM28XX_I2C_FREQ_100_KHZ, 2420 .def_i2c_bus = 1, 2421 .tuner_type = TUNER_ABSENT, 2422 .is_webcam = 1, 2423 .input = { { 2424 .type = EM28XX_VMUX_COMPOSITE, 2425 .amux = EM28XX_AMUX_VIDEO, 2426 .gpio = speedlink_vad_laplace_reg_seq, 2427 } }, 2428 .buttons = speedlink_vad_laplace_buttons, 2429 .leds = speedlink_vad_laplace_leds, 2430 }, 2431 /* 2432 * 2013:0258 PCTV DVB-S2 Stick (461e) 2433 * Empia EM28178, Montage M88DS3103, Montage M88TS2022, Allegro A8293 2434 */ 2435 [EM28178_BOARD_PCTV_461E] = { 2436 .def_i2c_bus = 1, 2437 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 2438 EM28XX_I2C_FREQ_400_KHZ, 2439 .name = "PCTV DVB-S2 Stick (461e)", 2440 .tuner_type = TUNER_ABSENT, 2441 .tuner_gpio = pctv_461e, 2442 .has_dvb = 1, 2443 .ir_codes = RC_MAP_PINNACLE_PCTV_HD, 2444 }, 2445 /* 2446 * 2013:0259 PCTV DVB-S2 Stick (461e_v2) 2447 * Empia EM28178, Montage M88DS3103b, Montage M88TS2022, Allegro A8293 2448 */ 2449 [EM28178_BOARD_PCTV_461E_V2] = { 2450 .def_i2c_bus = 1, 2451 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 2452 EM28XX_I2C_FREQ_400_KHZ, 2453 .name = "PCTV DVB-S2 Stick (461e v2)", 2454 .tuner_type = TUNER_ABSENT, 2455 .tuner_gpio = pctv_461e, 2456 .has_dvb = 1, 2457 .ir_codes = RC_MAP_PINNACLE_PCTV_HD, 2458 }, 2459 /* 2460 * 2013:025f PCTV tripleStick (292e). 2461 * Empia EM28178, Silicon Labs Si2168, Silicon Labs Si2157 2462 */ 2463 [EM28178_BOARD_PCTV_292E] = { 2464 .name = "PCTV tripleStick (292e)", 2465 .def_i2c_bus = 1, 2466 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 2467 EM28XX_I2C_FREQ_400_KHZ, 2468 .tuner_type = TUNER_ABSENT, 2469 .tuner_gpio = pctv_292e, 2470 .has_dvb = 1, 2471 .ir_codes = RC_MAP_PINNACLE_PCTV_HD, 2472 }, 2473 [EM2861_BOARD_LEADTEK_VC100] = { 2474 .name = "Leadtek VC100", 2475 .tuner_type = TUNER_ABSENT, /* Capture only device */ 2476 .decoder = EM28XX_TVP5150, 2477 .input = { { 2478 .type = EM28XX_VMUX_COMPOSITE, 2479 .vmux = TVP5150_COMPOSITE1, 2480 .amux = EM28XX_AMUX_LINE_IN, 2481 }, { 2482 .type = EM28XX_VMUX_SVIDEO, 2483 .vmux = TVP5150_SVIDEO, 2484 .amux = EM28XX_AMUX_LINE_IN, 2485 } }, 2486 }, 2487 /* 2488 * eb1a:8179 Terratec Cinergy T2 Stick HD. 2489 * Empia EM28178, Silicon Labs Si2168, Silicon Labs Si2146 2490 */ 2491 [EM28178_BOARD_TERRATEC_T2_STICK_HD] = { 2492 .name = "Terratec Cinergy T2 Stick HD", 2493 .def_i2c_bus = 1, 2494 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 2495 EM28XX_I2C_FREQ_400_KHZ, 2496 .tuner_type = TUNER_ABSENT, 2497 .tuner_gpio = terratec_t2_stick_hd, 2498 .has_dvb = 1, 2499 .ir_codes = RC_MAP_TERRATEC_SLIM_2, 2500 }, 2501 2502 /* 2503 * 3275:0085 PLEX PX-BCUD. 2504 * Empia EM28178, TOSHIBA TC90532XBG, Sharp QM1D1C0042 2505 */ 2506 [EM28178_BOARD_PLEX_PX_BCUD] = { 2507 .name = "PLEX PX-BCUD", 2508 .xclk = EM28XX_XCLK_FREQUENCY_4_3MHZ, 2509 .def_i2c_bus = 1, 2510 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE, 2511 .tuner_type = TUNER_ABSENT, 2512 .tuner_gpio = plex_px_bcud, 2513 .has_dvb = 1, 2514 }, 2515 /* 2516 * 2040:0265 Hauppauge WinTV-dualHD (DVB version) Isoc. 2517 * 2040:8265 Hauppauge WinTV-dualHD (DVB version) Bulk. 2518 * Empia EM28274, 2x Silicon Labs Si2168, 2x Silicon Labs Si2157 2519 */ 2520 [EM28174_BOARD_HAUPPAUGE_WINTV_DUALHD_DVB] = { 2521 .name = "Hauppauge WinTV-dualHD DVB", 2522 .def_i2c_bus = 1, 2523 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 2524 EM28XX_I2C_FREQ_400_KHZ, 2525 .tuner_type = TUNER_SI2157, 2526 .tuner_gpio = hauppauge_dualhd_dvb, 2527 .has_dvb = 1, 2528 .has_dual_ts = 1, 2529 .ir_codes = RC_MAP_HAUPPAUGE, 2530 .leds = hauppauge_dualhd_leds, 2531 .input = { { 2532 .type = EM28XX_VMUX_COMPOSITE, 2533 .vmux = TVP5150_COMPOSITE1, 2534 .amux = EM28XX_AMUX_LINE_IN, 2535 } }, 2536 }, 2537 /* 2538 * 2040:026d Hauppauge WinTV-dualHD (model 01595 - ATSC/QAM) Isoc. 2539 * 2040:826d Hauppauge WinTV-dualHD (model 01595 - ATSC/QAM) Bulk. 2540 * Empia EM28274, 2x LG LGDT3306A, 2x Silicon Labs Si2157 2541 */ 2542 [EM28174_BOARD_HAUPPAUGE_WINTV_DUALHD_01595] = { 2543 .name = "Hauppauge WinTV-dualHD 01595 ATSC/QAM", 2544 .def_i2c_bus = 1, 2545 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 2546 EM28XX_I2C_FREQ_400_KHZ, 2547 .tuner_type = TUNER_ABSENT, 2548 .tuner_gpio = hauppauge_dualhd_dvb, 2549 .has_dvb = 1, 2550 .has_dual_ts = 1, 2551 .ir_codes = RC_MAP_HAUPPAUGE, 2552 .leds = hauppauge_dualhd_leds, 2553 }, 2554 /* 2555 * 1b80:e349 Magix USB Videowandler-2 2556 * (same chips as Honestech VIDBOX NW03) 2557 * Empia EM2860, Philips SAA7113, Empia EMP202, No Tuner 2558 */ 2559 [EM2861_BOARD_MAGIX_VIDEOWANDLER2] = { 2560 .name = "Magix USB Videowandler-2", 2561 .tuner_type = TUNER_ABSENT, 2562 .decoder = EM28XX_SAA711X, 2563 .input = { { 2564 .type = EM28XX_VMUX_COMPOSITE, 2565 .vmux = SAA7115_COMPOSITE0, 2566 .amux = EM28XX_AMUX_LINE_IN, 2567 }, { 2568 .type = EM28XX_VMUX_SVIDEO, 2569 .amux = EM28XX_AMUX_LINE_IN, 2570 } }, 2571 }, 2572 /* 2573 * 1f4d:1abe MyGica iGrabber 2574 * (same as several other EM2860 devices) 2575 * Empia EM2860, Philips SAA7113, Empia EMP202, No Tuner 2576 */ 2577 [EM2860_BOARD_MYGICA_IGRABBER] = { 2578 .name = "MyGica iGrabber", 2579 .vchannels = 2, 2580 .tuner_type = TUNER_ABSENT, 2581 .decoder = EM28XX_SAA711X, 2582 .input = { { 2583 .type = EM28XX_VMUX_COMPOSITE, 2584 .vmux = SAA7115_COMPOSITE0, 2585 .amux = EM28XX_AMUX_LINE_IN, 2586 }, { 2587 .type = EM28XX_VMUX_SVIDEO, 2588 .vmux = SAA7115_SVIDEO3, 2589 .amux = EM28XX_AMUX_LINE_IN, 2590 } }, 2591 }, 2592 /* 2040:826d Hauppauge USB QuadHD 2593 * Empia 28274, Max Linear 692 ATSC combo demod/tuner 2594 */ 2595 [EM2874_BOARD_HAUPPAUGE_USB_QUADHD] = { 2596 .name = "Hauppauge USB QuadHD ATSC", 2597 .def_i2c_bus = 1, 2598 .has_dual_ts = 1, 2599 .has_dvb = 1, 2600 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | EM28XX_I2C_FREQ_100_KHZ, 2601 .tuner_type = TUNER_ABSENT, 2602 .tuner_gpio = hauppauge_usb_quadhd_atsc_reg_seq, 2603 .leds = hauppauge_usb_quadhd_leds, 2604 }, 2605 /* 2606 * eb1a:2860 MyGica UTV3 Analog USB2.0 TV Box 2607 * Empia EM2860, Philips SAA7113, NXP TDA9801T demod, 2608 * Tena TNF931D-DFDR1 tuner (contains NXP TDA6509A), 2609 * ST HCF4052 demux (switches audio to line out), 2610 * no audio over USB 2611 */ 2612 [EM2860_BOARD_MYGICA_UTV3] = { 2613 .name = "MyGica UTV3 Analog USB2.0 TV Box", 2614 .xclk = EM28XX_XCLK_IR_RC5_MODE | EM28XX_XCLK_FREQUENCY_12MHZ, 2615 .tuner_type = TUNER_TENA_TNF_931D_DFDR1, 2616 .ir_codes = RC_MAP_MYGICA_UTV3, 2617 .decoder = EM28XX_SAA711X, 2618 .suspend_gpio = mygica_utv3_suspend_gpio, 2619 .input = { { 2620 .type = EM28XX_VMUX_COMPOSITE, 2621 .vmux = SAA7115_COMPOSITE0, 2622 .amux = EM28XX_AMUX_VIDEO, 2623 .gpio = mygica_utv3_composite_audio_gpio, 2624 }, { 2625 .type = EM28XX_VMUX_TELEVISION, 2626 .vmux = SAA7115_COMPOSITE2, 2627 .amux = EM28XX_AMUX_VIDEO, 2628 .gpio = mygica_utv3_tuner_audio_gpio, 2629 } }, 2630 }, 2631}; 2632EXPORT_SYMBOL_GPL(em28xx_boards); 2633 2634static const unsigned int em28xx_bcount = ARRAY_SIZE(em28xx_boards); 2635 2636/* table of devices that work with this driver */ 2637struct usb_device_id em28xx_id_table[] = { 2638 { USB_DEVICE(0xeb1a, 0x2750), 2639 .driver_info = EM2750_BOARD_UNKNOWN }, 2640 { USB_DEVICE(0xeb1a, 0x2751), 2641 .driver_info = EM2750_BOARD_UNKNOWN }, 2642 { USB_DEVICE(0xeb1a, 0x2800), 2643 .driver_info = EM2800_BOARD_UNKNOWN }, 2644 { USB_DEVICE(0xeb1a, 0x2710), 2645 .driver_info = EM2820_BOARD_UNKNOWN }, 2646 { USB_DEVICE(0xeb1a, 0x2820), 2647 .driver_info = EM2820_BOARD_UNKNOWN }, 2648 { USB_DEVICE(0xeb1a, 0x2821), 2649 .driver_info = EM2820_BOARD_UNKNOWN }, 2650 { USB_DEVICE(0xeb1a, 0x2860), 2651 .driver_info = EM2820_BOARD_UNKNOWN }, 2652 { USB_DEVICE(0xeb1a, 0x2861), 2653 .driver_info = EM2820_BOARD_UNKNOWN }, 2654 { USB_DEVICE(0xeb1a, 0x2862), 2655 .driver_info = EM2820_BOARD_UNKNOWN }, 2656 { USB_DEVICE(0xeb1a, 0x2863), 2657 .driver_info = EM2820_BOARD_UNKNOWN }, 2658 { USB_DEVICE(0xeb1a, 0x2870), 2659 .driver_info = EM2820_BOARD_UNKNOWN }, 2660 { USB_DEVICE(0xeb1a, 0x2881), 2661 .driver_info = EM2820_BOARD_UNKNOWN }, 2662 { USB_DEVICE(0xeb1a, 0x2883), /* used by :Zolid Hybrid Tv Stick */ 2663 .driver_info = EM2820_BOARD_UNKNOWN }, 2664 { USB_DEVICE(0xeb1a, 0x2868), 2665 .driver_info = EM2820_BOARD_UNKNOWN }, 2666 { USB_DEVICE(0xeb1a, 0x2875), 2667 .driver_info = EM2820_BOARD_UNKNOWN }, 2668 { USB_DEVICE(0xeb1a, 0x2885), /* MSI Digivox Trio */ 2669 .driver_info = EM2884_BOARD_TERRATEC_H5 }, 2670 { USB_DEVICE(0xeb1a, 0xe300), 2671 .driver_info = EM2861_BOARD_KWORLD_PVRTV_300U }, 2672 { USB_DEVICE(0xeb1a, 0xe303), 2673 .driver_info = EM2860_BOARD_KAIOMY_TVNPC_U2 }, 2674 { USB_DEVICE(0xeb1a, 0xe305), 2675 .driver_info = EM2880_BOARD_KWORLD_DVB_305U }, 2676 { USB_DEVICE(0xeb1a, 0xe310), 2677 .driver_info = EM2880_BOARD_MSI_DIGIVOX_AD }, 2678 { USB_DEVICE(0xeb1a, 0xa313), 2679 .driver_info = EM2882_BOARD_KWORLD_ATSC_315U }, 2680 { USB_DEVICE(0xeb1a, 0xa316), 2681 .driver_info = EM2883_BOARD_KWORLD_HYBRID_330U }, 2682 { USB_DEVICE(0xeb1a, 0xe320), 2683 .driver_info = EM2880_BOARD_MSI_DIGIVOX_AD_II }, 2684 { USB_DEVICE(0xeb1a, 0xe323), 2685 .driver_info = EM2882_BOARD_KWORLD_VS_DVBT }, 2686 { USB_DEVICE(0xeb1a, 0xe350), 2687 .driver_info = EM2870_BOARD_KWORLD_350U }, 2688 { USB_DEVICE(0xeb1a, 0xe355), 2689 .driver_info = EM2870_BOARD_KWORLD_355U }, 2690 { USB_DEVICE(0xeb1a, 0x2801), 2691 .driver_info = EM2800_BOARD_GRABBEEX_USB2800 }, 2692 { USB_DEVICE(0xeb1a, 0xe357), 2693 .driver_info = EM2870_BOARD_KWORLD_355U }, 2694 { USB_DEVICE(0xeb1a, 0xe359), 2695 .driver_info = EM2870_BOARD_KWORLD_355U }, 2696 { USB_DEVICE(0x1b80, 0xe302), /* Kaiser Baas Video to DVD maker */ 2697 .driver_info = EM2820_BOARD_PINNACLE_DVC_90 }, 2698 { USB_DEVICE(0x1b80, 0xe304), /* Kworld DVD Maker 2 */ 2699 .driver_info = EM2820_BOARD_PINNACLE_DVC_90 }, 2700 { USB_DEVICE(0x0ccd, 0x0036), 2701 .driver_info = EM2820_BOARD_TERRATEC_CINERGY_250 }, 2702 { USB_DEVICE(0x0ccd, 0x004c), 2703 .driver_info = EM2880_BOARD_TERRATEC_HYBRID_XS_FR }, 2704 { USB_DEVICE(0x0ccd, 0x004f), 2705 .driver_info = EM2860_BOARD_TERRATEC_HYBRID_XS }, 2706 { USB_DEVICE(0x0ccd, 0x005e), 2707 .driver_info = EM2882_BOARD_TERRATEC_HYBRID_XS }, 2708 { USB_DEVICE(0x0ccd, 0x0042), 2709 .driver_info = EM2882_BOARD_TERRATEC_HYBRID_XS }, 2710 { USB_DEVICE(0x0ccd, 0x0043), 2711 .driver_info = EM2870_BOARD_TERRATEC_XS_MT2060 }, 2712 { USB_DEVICE(0x0ccd, 0x008e), /* Cinergy HTC USB XS Rev. 1 */ 2713 .driver_info = EM2884_BOARD_TERRATEC_HTC_USB_XS }, 2714 { USB_DEVICE(0x0ccd, 0x00ac), /* Cinergy HTC USB XS Rev. 2 */ 2715 .driver_info = EM2884_BOARD_TERRATEC_HTC_USB_XS }, 2716 { USB_DEVICE(0x0ccd, 0x10a2), /* H5 Rev. 1 */ 2717 .driver_info = EM2884_BOARD_TERRATEC_H5 }, 2718 { USB_DEVICE(0x0ccd, 0x10ad), /* H5 Rev. 2 */ 2719 .driver_info = EM2884_BOARD_TERRATEC_H5 }, 2720 { USB_DEVICE(0x0ccd, 0x10b6), /* H5 Rev. 3 */ 2721 .driver_info = EM2884_BOARD_TERRATEC_H5 }, 2722 { USB_DEVICE(0x0ccd, 0x10b2), /* H6 */ 2723 .driver_info = EM2884_BOARD_TERRATEC_H6 }, 2724 { USB_DEVICE(0x0ccd, 0x0084), 2725 .driver_info = EM2860_BOARD_TERRATEC_AV350 }, 2726 { USB_DEVICE(0x0ccd, 0x0096), 2727 .driver_info = EM2860_BOARD_TERRATEC_GRABBY }, 2728 { USB_DEVICE(0x0ccd, 0x10AF), 2729 .driver_info = EM2860_BOARD_TERRATEC_GRABBY }, 2730 { USB_DEVICE(0x0ccd, 0x00b2), 2731 .driver_info = EM2884_BOARD_CINERGY_HTC_STICK }, 2732 { USB_DEVICE(0x0fd9, 0x0018), 2733 .driver_info = EM2884_BOARD_ELGATO_EYETV_HYBRID_2008 }, 2734 { USB_DEVICE(0x0fd9, 0x0033), 2735 .driver_info = EM2860_BOARD_ELGATO_VIDEO_CAPTURE }, 2736 { USB_DEVICE(0x185b, 0x2870), 2737 .driver_info = EM2870_BOARD_COMPRO_VIDEOMATE }, 2738 { USB_DEVICE(0x185b, 0x2041), 2739 .driver_info = EM2820_BOARD_COMPRO_VIDEOMATE_FORYOU }, 2740 { USB_DEVICE(0x2040, 0x4200), 2741 .driver_info = EM2820_BOARD_HAUPPAUGE_WINTV_USB_2 }, 2742 { USB_DEVICE(0x2040, 0x4201), 2743 .driver_info = EM2820_BOARD_HAUPPAUGE_WINTV_USB_2 }, 2744 { USB_DEVICE(0x2040, 0x6500), 2745 .driver_info = EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900 }, 2746 { USB_DEVICE(0x2040, 0x6502), 2747 .driver_info = EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2 }, 2748 { USB_DEVICE(0x2040, 0x6513), /* HCW HVR-980 */ 2749 .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 }, 2750 { USB_DEVICE(0x2040, 0x6517), /* HP HVR-950 */ 2751 .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 }, 2752 { USB_DEVICE(0x2040, 0x651b), /* RP HVR-950 */ 2753 .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 }, 2754 { USB_DEVICE(0x2040, 0x651f), 2755 .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850 }, 2756 { USB_DEVICE(0x2040, 0x0265), 2757 .driver_info = EM28174_BOARD_HAUPPAUGE_WINTV_DUALHD_DVB }, 2758 { USB_DEVICE(0x2040, 0x8265), 2759 .driver_info = EM28174_BOARD_HAUPPAUGE_WINTV_DUALHD_DVB }, 2760 { USB_DEVICE(0x2040, 0x026d), 2761 .driver_info = EM28174_BOARD_HAUPPAUGE_WINTV_DUALHD_01595 }, 2762 { USB_DEVICE(0x2040, 0x826d), 2763 .driver_info = EM28174_BOARD_HAUPPAUGE_WINTV_DUALHD_01595 }, 2764 { USB_DEVICE(0x2040, 0x846d), 2765 .driver_info = EM2874_BOARD_HAUPPAUGE_USB_QUADHD }, 2766 { USB_DEVICE(0x0438, 0xb002), 2767 .driver_info = EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600 }, 2768 { USB_DEVICE(0x2001, 0xf112), 2769 .driver_info = EM2820_BOARD_DLINK_USB_TV }, 2770 { USB_DEVICE(0x2304, 0x0207), 2771 .driver_info = EM2820_BOARD_PINNACLE_DVC_90 }, 2772 { USB_DEVICE(0x2304, 0x0208), 2773 .driver_info = EM2820_BOARD_PINNACLE_USB_2 }, 2774 { USB_DEVICE(0x2304, 0x021a), 2775 .driver_info = EM2820_BOARD_PINNACLE_DVC_90 }, 2776 { USB_DEVICE(0x2304, 0x0226), 2777 .driver_info = EM2882_BOARD_PINNACLE_HYBRID_PRO_330E }, 2778 { USB_DEVICE(0x2304, 0x0227), 2779 .driver_info = EM2880_BOARD_PINNACLE_PCTV_HD_PRO }, 2780 { USB_DEVICE(0x2304, 0x023f), 2781 .driver_info = EM2874_BOARD_PCTV_HD_MINI_80E }, 2782 { USB_DEVICE(0x0413, 0x6023), 2783 .driver_info = EM2800_BOARD_LEADTEK_WINFAST_USBII }, 2784 { USB_DEVICE(0x093b, 0xa003), 2785 .driver_info = EM2820_BOARD_PINNACLE_DVC_90 }, 2786 { USB_DEVICE(0x093b, 0xa005), 2787 .driver_info = EM2861_BOARD_PLEXTOR_PX_TV100U }, 2788 { USB_DEVICE(0x04bb, 0x0515), 2789 .driver_info = EM2820_BOARD_IODATA_GVMVP_SZ }, 2790 { USB_DEVICE(0xeb1a, 0x50a6), 2791 .driver_info = EM2860_BOARD_GADMEI_UTV330 }, 2792 { USB_DEVICE(0x1b80, 0xa340), 2793 .driver_info = EM2870_BOARD_KWORLD_A340 }, 2794 { USB_DEVICE(0x1b80, 0xe346), 2795 .driver_info = EM2874_BOARD_KWORLD_UB435Q_V2 }, 2796 { USB_DEVICE(0x1b80, 0xe34c), 2797 .driver_info = EM2874_BOARD_KWORLD_UB435Q_V3 }, 2798 { USB_DEVICE(0x2013, 0x024f), 2799 .driver_info = EM28174_BOARD_PCTV_290E }, 2800 { USB_DEVICE(0x2013, 0x024c), 2801 .driver_info = EM28174_BOARD_PCTV_460E }, 2802 { USB_DEVICE(0x2040, 0x1605), 2803 .driver_info = EM2884_BOARD_HAUPPAUGE_WINTV_HVR_930C }, 2804 { USB_DEVICE(0x1b80, 0xe755), 2805 .driver_info = EM2884_BOARD_C3TECH_DIGITAL_DUO }, 2806 { USB_DEVICE(0xeb1a, 0x5006), 2807 .driver_info = EM2860_BOARD_HT_VIDBOX_NW03 }, 2808 { USB_DEVICE(0x1b80, 0xe309), /* Sveon STV40 */ 2809 .driver_info = EM2860_BOARD_EASYCAP }, 2810 { USB_DEVICE(0x1b80, 0xe425), 2811 .driver_info = EM2874_BOARD_MAXMEDIA_UB425_TC }, 2812 { USB_DEVICE(0x1f4d, 0x1abe), 2813 .driver_info = EM2860_BOARD_MYGICA_IGRABBER }, 2814 { USB_DEVICE(0x2304, 0x0242), 2815 .driver_info = EM2884_BOARD_PCTV_510E }, 2816 { USB_DEVICE(0x2013, 0x0251), 2817 .driver_info = EM2884_BOARD_PCTV_520E }, 2818 { USB_DEVICE(0x1b80, 0xe1cc), 2819 .driver_info = EM2874_BOARD_DELOCK_61959 }, 2820 { USB_DEVICE(0x1ae7, 0x9003), 2821 .driver_info = EM2765_BOARD_SPEEDLINK_VAD_LAPLACE }, 2822 { USB_DEVICE(0x1ae7, 0x9004), 2823 .driver_info = EM2765_BOARD_SPEEDLINK_VAD_LAPLACE }, 2824 { USB_DEVICE(0x2013, 0x0258), 2825 .driver_info = EM28178_BOARD_PCTV_461E }, 2826 { USB_DEVICE(0x2013, 0x8258), /* Bulk transport 461e */ 2827 .driver_info = EM28178_BOARD_PCTV_461E }, 2828 { USB_DEVICE(0x2013, 0x0461), 2829 .driver_info = EM28178_BOARD_PCTV_461E_V2 }, 2830 { USB_DEVICE(0x2013, 0x8461), /* Bulk transport 461e v2 */ 2831 .driver_info = EM28178_BOARD_PCTV_461E_V2 }, 2832 { USB_DEVICE(0x2013, 0x0259), 2833 .driver_info = EM28178_BOARD_PCTV_461E_V2 }, 2834 { USB_DEVICE(0x2013, 0x025f), 2835 .driver_info = EM28178_BOARD_PCTV_292E }, 2836 { USB_DEVICE(0x2013, 0x0264), /* Hauppauge WinTV-soloHD 292e SE */ 2837 .driver_info = EM28178_BOARD_PCTV_292E }, 2838 { USB_DEVICE(0x2040, 0x0264), /* Hauppauge WinTV-soloHD Isoc */ 2839 .driver_info = EM28178_BOARD_PCTV_292E }, 2840 { USB_DEVICE(0x2040, 0x8264), /* Hauppauge OEM Generic WinTV-soloHD Bulk */ 2841 .driver_info = EM28178_BOARD_PCTV_292E }, 2842 { USB_DEVICE(0x2040, 0x8268), /* Hauppauge Retail WinTV-soloHD Bulk */ 2843 .driver_info = EM28178_BOARD_PCTV_292E }, 2844 { USB_DEVICE(0x0413, 0x6f07), 2845 .driver_info = EM2861_BOARD_LEADTEK_VC100 }, 2846 { USB_DEVICE(0xeb1a, 0x8179), 2847 .driver_info = EM28178_BOARD_TERRATEC_T2_STICK_HD }, 2848 { USB_DEVICE(0x3275, 0x0085), 2849 .driver_info = EM28178_BOARD_PLEX_PX_BCUD }, 2850 { USB_DEVICE(0xeb1a, 0x5051), /* Ion Video 2 PC MKII / Startech svid2usb23 / Raygo R12-41373 */ 2851 .driver_info = EM2860_BOARD_TVP5150_REFERENCE_DESIGN }, 2852 { USB_DEVICE(0x1b80, 0xe349), /* Magix USB Videowandler-2 */ 2853 .driver_info = EM2861_BOARD_MAGIX_VIDEOWANDLER2 }, 2854 { }, 2855}; 2856MODULE_DEVICE_TABLE(usb, em28xx_id_table); 2857 2858/* 2859 * EEPROM hash table for devices with generic USB IDs 2860 */ 2861static const struct em28xx_hash_table em28xx_eeprom_hash[] = { 2862 /* P/N: SA 60002070465 Tuner: TVF7533-MF */ 2863 {0x6ce05a8f, EM2820_BOARD_PROLINK_PLAYTV_USB2, TUNER_YMEC_TVF_5533MF}, 2864 {0x72cc5a8b, EM2820_BOARD_PROLINK_PLAYTV_BOX4_USB2, TUNER_YMEC_TVF_5533MF}, 2865 {0x966a0441, EM2880_BOARD_KWORLD_DVB_310U, TUNER_XC2028}, 2866 {0x166a0441, EM2880_BOARD_EMPIRE_DUAL_TV, TUNER_XC2028}, 2867 {0xcee44a99, EM2882_BOARD_EVGA_INDTUBE, TUNER_XC2028}, 2868 {0xb8846b20, EM2881_BOARD_PINNACLE_HYBRID_PRO, TUNER_XC2028}, 2869 {0x63f653bd, EM2870_BOARD_REDDO_DVB_C_USB_BOX, TUNER_ABSENT}, 2870 {0x4e913442, EM2882_BOARD_DIKOM_DK300, TUNER_XC2028}, 2871 {0x85dd871e, EM2882_BOARD_ZOLID_HYBRID_TV_STICK, TUNER_XC2028}, 2872 {0x8f597549, EM2860_BOARD_MYGICA_UTV3, TUNER_TENA_TNF_931D_DFDR1}, 2873}; 2874 2875/* I2C devicelist hash table for devices with generic USB IDs */ 2876static const struct em28xx_hash_table em28xx_i2c_hash[] = { 2877 {0xb06a32c3, EM2800_BOARD_TERRATEC_CINERGY_200, TUNER_LG_PAL_NEW_TAPC}, 2878 {0xf51200e3, EM2800_BOARD_VGEAR_POCKETTV, TUNER_LG_PAL_NEW_TAPC}, 2879 {0x1ba50080, EM2860_BOARD_SAA711X_REFERENCE_DESIGN, TUNER_ABSENT}, 2880 {0x77800080, EM2860_BOARD_TVP5150_REFERENCE_DESIGN, TUNER_ABSENT}, 2881 {0xc51200e3, EM2820_BOARD_GADMEI_TVR200, TUNER_LG_PAL_NEW_TAPC}, 2882 {0x4ba50080, EM2861_BOARD_GADMEI_UTV330PLUS, TUNER_TNF_5335MF}, 2883 {0x6b800080, EM2874_BOARD_LEADERSHIP_ISDBT, TUNER_ABSENT}, 2884 {0x27e10080, EM2882_BOARD_ZOLID_HYBRID_TV_STICK, TUNER_XC2028}, 2885 {0x840d0484, EM2860_BOARD_MYGICA_UTV3, TUNER_TENA_TNF_931D_DFDR1}, 2886}; 2887 2888/* NOTE: introduce a separate hash table for devices with 16 bit eeproms */ 2889 2890int em28xx_tuner_callback(void *ptr, int component, int command, int arg) 2891{ 2892 struct em28xx_i2c_bus *i2c_bus = ptr; 2893 struct em28xx *dev = i2c_bus->dev; 2894 int rc = 0; 2895 2896 if (dev->tuner_type != TUNER_XC2028 && dev->tuner_type != TUNER_XC5000) 2897 return 0; 2898 2899 if (command != XC2028_TUNER_RESET && command != XC5000_TUNER_RESET) 2900 return 0; 2901 2902 rc = em28xx_gpio_set(dev, dev->board.tuner_gpio); 2903 2904 return rc; 2905} 2906EXPORT_SYMBOL_GPL(em28xx_tuner_callback); 2907 2908static inline void em28xx_set_xclk_i2c_speed(struct em28xx *dev) 2909{ 2910 const struct em28xx_board *board = &em28xx_boards[dev->model]; 2911 u8 xclk = board->xclk, i2c_speed = board->i2c_speed; 2912 2913 /* 2914 * Those are the default values for the majority of boards 2915 * Use those values if not specified otherwise at boards entry 2916 */ 2917 if (!xclk) 2918 xclk = EM28XX_XCLK_IR_RC5_MODE | 2919 EM28XX_XCLK_FREQUENCY_12MHZ; 2920 2921 em28xx_write_reg(dev, EM28XX_R0F_XCLK, xclk); 2922 2923 if (!i2c_speed) 2924 i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 2925 EM28XX_I2C_FREQ_100_KHZ; 2926 2927 dev->i2c_speed = i2c_speed & 0x03; 2928 2929 if (!dev->board.is_em2800) 2930 em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, i2c_speed); 2931 msleep(50); 2932} 2933 2934static inline void em28xx_set_model(struct em28xx *dev) 2935{ 2936 dev->board = em28xx_boards[dev->model]; 2937 dev->has_msp34xx = dev->board.has_msp34xx; 2938 dev->is_webcam = dev->board.is_webcam; 2939 2940 em28xx_set_xclk_i2c_speed(dev); 2941 2942 /* Should be initialized early, for I2C to work */ 2943 dev->def_i2c_bus = dev->board.def_i2c_bus; 2944} 2945 2946/* 2947 * Wait until AC97_RESET reports the expected value reliably before proceeding. 2948 * We also check that two unrelated registers accesses don't return the same 2949 * value to avoid premature return. 2950 * This procedure helps ensuring AC97 register accesses are reliable. 2951 */ 2952static int em28xx_wait_until_ac97_features_equals(struct em28xx *dev, 2953 int expected_feat) 2954{ 2955 unsigned long timeout = jiffies + msecs_to_jiffies(2000); 2956 int feat, powerdown; 2957 2958 while (time_is_after_jiffies(timeout)) { 2959 feat = em28xx_read_ac97(dev, AC97_RESET); 2960 if (feat < 0) 2961 return feat; 2962 2963 powerdown = em28xx_read_ac97(dev, AC97_POWERDOWN); 2964 if (powerdown < 0) 2965 return powerdown; 2966 2967 if (feat == expected_feat && feat != powerdown) 2968 return 0; 2969 2970 msleep(50); 2971 } 2972 2973 dev_warn(&dev->intf->dev, "AC97 registers access is not reliable !\n"); 2974 return -ETIMEDOUT; 2975} 2976 2977/* 2978 * Since em28xx_pre_card_setup() requires a proper dev->model, 2979 * this won't work for boards with generic PCI IDs 2980 */ 2981static void em28xx_pre_card_setup(struct em28xx *dev) 2982{ 2983 /* 2984 * Set the initial XCLK and I2C clock values based on the board 2985 * definition 2986 */ 2987 em28xx_set_xclk_i2c_speed(dev); 2988 2989 /* request some modules */ 2990 switch (dev->model) { 2991 case EM2861_BOARD_PLEXTOR_PX_TV100U: 2992 /* Sets the msp34xx I2S speed */ 2993 dev->i2s_speed = 2048000; 2994 break; 2995 case EM2861_BOARD_KWORLD_PVRTV_300U: 2996 case EM2880_BOARD_KWORLD_DVB_305U: 2997 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0x6d); 2998 usleep_range(10000, 11000); 2999 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0x7d); 3000 usleep_range(10000, 11000); 3001 break; 3002 case EM2870_BOARD_COMPRO_VIDEOMATE: 3003 /* 3004 * TODO: someone can do some cleanup here... 3005 * not everything's needed 3006 */ 3007 em28xx_write_reg(dev, EM2880_R04_GPO, 0x00); 3008 usleep_range(10000, 11000); 3009 em28xx_write_reg(dev, EM2880_R04_GPO, 0x01); 3010 usleep_range(10000, 11000); 3011 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfd); 3012 msleep(70); 3013 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfc); 3014 msleep(70); 3015 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xdc); 3016 msleep(70); 3017 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfc); 3018 msleep(70); 3019 break; 3020 case EM2870_BOARD_TERRATEC_XS_MT2060: 3021 /* 3022 * this device needs some gpio writes to get the DVB-T 3023 * demod work 3024 */ 3025 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfe); 3026 msleep(70); 3027 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xde); 3028 msleep(70); 3029 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfe); 3030 msleep(70); 3031 break; 3032 case EM2870_BOARD_PINNACLE_PCTV_DVB: 3033 /* 3034 * this device needs some gpio writes to get the 3035 * DVB-T demod work 3036 */ 3037 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfe); 3038 msleep(70); 3039 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xde); 3040 msleep(70); 3041 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfe); 3042 msleep(70); 3043 break; 3044 case EM2820_BOARD_GADMEI_UTV310: 3045 case EM2820_BOARD_MSI_VOX_USB_2: 3046 /* enables audio for that devices */ 3047 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfd); 3048 break; 3049 3050 case EM2882_BOARD_KWORLD_ATSC_315U: 3051 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xff); 3052 usleep_range(10000, 11000); 3053 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfe); 3054 usleep_range(10000, 11000); 3055 em28xx_write_reg(dev, EM2880_R04_GPO, 0x00); 3056 usleep_range(10000, 11000); 3057 em28xx_write_reg(dev, EM2880_R04_GPO, 0x08); 3058 usleep_range(10000, 11000); 3059 break; 3060 3061 case EM2860_BOARD_KAIOMY_TVNPC_U2: 3062 em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x07", 1); 3063 em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x40", 1); 3064 em28xx_write_regs(dev, 0x0d, "\x42", 1); 3065 em28xx_write_regs(dev, 0x08, "\xfd", 1); 3066 usleep_range(10000, 11000); 3067 em28xx_write_regs(dev, 0x08, "\xff", 1); 3068 usleep_range(10000, 11000); 3069 em28xx_write_regs(dev, 0x08, "\x7f", 1); 3070 usleep_range(10000, 11000); 3071 em28xx_write_regs(dev, 0x08, "\x6b", 1); 3072 3073 break; 3074 case EM2860_BOARD_EASYCAP: 3075 em28xx_write_regs(dev, 0x08, "\xf8", 1); 3076 break; 3077 3078 case EM2820_BOARD_IODATA_GVMVP_SZ: 3079 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xff); 3080 msleep(70); 3081 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xf7); 3082 usleep_range(10000, 11000); 3083 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfe); 3084 msleep(70); 3085 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfd); 3086 msleep(70); 3087 break; 3088 3089 case EM2860_BOARD_TERRATEC_GRABBY: 3090 /* 3091 * HACK?: Ensure AC97 register reading is reliable before 3092 * proceeding. In practice, this will wait about 1.6 seconds. 3093 */ 3094 em28xx_wait_until_ac97_features_equals(dev, 0x6a90); 3095 break; 3096 } 3097 3098 em28xx_gpio_set(dev, dev->board.tuner_gpio); 3099 em28xx_set_mode(dev, EM28XX_ANALOG_MODE); 3100 3101 /* Unlock device */ 3102 em28xx_set_mode(dev, EM28XX_SUSPEND); 3103} 3104 3105static int em28xx_hint_board(struct em28xx *dev) 3106{ 3107 int i; 3108 3109 if (dev->is_webcam) { 3110 if (dev->em28xx_sensor == EM28XX_MT9V011) { 3111 dev->model = EM2820_BOARD_SILVERCREST_WEBCAM; 3112 } else if (dev->em28xx_sensor == EM28XX_MT9M001 || 3113 dev->em28xx_sensor == EM28XX_MT9M111) { 3114 dev->model = EM2750_BOARD_UNKNOWN; 3115 } 3116 /* FIXME: IMPROVE ! */ 3117 3118 return 0; 3119 } 3120 3121 /* 3122 * HINT method: EEPROM 3123 * 3124 * This method works only for boards with eeprom. 3125 * Uses a hash of all eeprom bytes. The hash should be 3126 * unique for a vendor/tuner pair. 3127 * There are a high chance that tuners for different 3128 * video standards produce different hashes. 3129 */ 3130 for (i = 0; i < ARRAY_SIZE(em28xx_eeprom_hash); i++) { 3131 if (dev->hash == em28xx_eeprom_hash[i].hash) { 3132 dev->model = em28xx_eeprom_hash[i].model; 3133 dev->tuner_type = em28xx_eeprom_hash[i].tuner; 3134 3135 dev_err(&dev->intf->dev, 3136 "Your board has no unique USB ID.\n" 3137 "A hint were successfully done, based on eeprom hash.\n" 3138 "This method is not 100%% failproof.\n" 3139 "If the board were misdetected, please email this log to:\n" 3140 "\tV4L Mailing List <linux-media@vger.kernel.org>\n" 3141 "Board detected as %s\n", 3142 em28xx_boards[dev->model].name); 3143 3144 return 0; 3145 } 3146 } 3147 3148 /* 3149 * HINT method: I2C attached devices 3150 * 3151 * This method works for all boards. 3152 * Uses a hash of i2c scanned devices. 3153 * Devices with the same i2c attached chips will 3154 * be considered equal. 3155 * This method is less precise than the eeprom one. 3156 */ 3157 3158 /* user did not request i2c scanning => do it now */ 3159 if (!dev->i2c_hash) 3160 em28xx_do_i2c_scan(dev, dev->def_i2c_bus); 3161 3162 for (i = 0; i < ARRAY_SIZE(em28xx_i2c_hash); i++) { 3163 if (dev->i2c_hash == em28xx_i2c_hash[i].hash) { 3164 dev->model = em28xx_i2c_hash[i].model; 3165 dev->tuner_type = em28xx_i2c_hash[i].tuner; 3166 dev_err(&dev->intf->dev, 3167 "Your board has no unique USB ID.\n" 3168 "A hint were successfully done, based on i2c devicelist hash.\n" 3169 "This method is not 100%% failproof.\n" 3170 "If the board were misdetected, please email this log to:\n" 3171 "\tV4L Mailing List <linux-media@vger.kernel.org>\n" 3172 "Board detected as %s\n", 3173 em28xx_boards[dev->model].name); 3174 3175 return 0; 3176 } 3177 } 3178 3179 dev_err(&dev->intf->dev, 3180 "Your board has no unique USB ID and thus need a hint to be detected.\n" 3181 "You may try to use card=<n> insmod option to workaround that.\n" 3182 "Please send an email with this log to:\n" 3183 "\tV4L Mailing List <linux-media@vger.kernel.org>\n" 3184 "Board eeprom hash is 0x%08lx\n" 3185 "Board i2c devicelist hash is 0x%08lx\n", 3186 dev->hash, dev->i2c_hash); 3187 3188 dev_err(&dev->intf->dev, 3189 "Here is a list of valid choices for the card=<n> insmod option:\n"); 3190 for (i = 0; i < em28xx_bcount; i++) { 3191 dev_err(&dev->intf->dev, 3192 " card=%d -> %s\n", i, em28xx_boards[i].name); 3193 } 3194 return -1; 3195} 3196 3197static void em28xx_card_setup(struct em28xx *dev) 3198{ 3199 int i, j, idx; 3200 bool duplicate_entry; 3201 3202 /* 3203 * If the device can be a webcam, seek for a sensor. 3204 * If sensor is not found, then it isn't a webcam. 3205 */ 3206 if (dev->is_webcam) { 3207 em28xx_detect_sensor(dev); 3208 if (dev->em28xx_sensor == EM28XX_NOSENSOR) 3209 /* NOTE: error/unknown sensor/no sensor */ 3210 dev->is_webcam = 0; 3211 } 3212 3213 switch (dev->model) { 3214 case EM2750_BOARD_UNKNOWN: 3215 case EM2820_BOARD_UNKNOWN: 3216 case EM2800_BOARD_UNKNOWN: 3217 /* 3218 * The K-WORLD DVB-T 310U is detected as an MSI Digivox AD. 3219 * 3220 * This occurs because they share identical USB vendor and 3221 * product IDs. 3222 * 3223 * What we do here is look up the EEPROM hash of the K-WORLD 3224 * and if it is found then we decide that we do not have 3225 * a DIGIVOX and reset the device to the K-WORLD instead. 3226 * 3227 * This solution is only valid if they do not share eeprom 3228 * hash identities which has not been determined as yet. 3229 */ 3230 if (em28xx_hint_board(dev) < 0) { 3231 dev_err(&dev->intf->dev, "Board not discovered\n"); 3232 } else { 3233 em28xx_set_model(dev); 3234 em28xx_pre_card_setup(dev); 3235 } 3236 break; 3237 default: 3238 em28xx_set_model(dev); 3239 } 3240 3241 dev_info(&dev->intf->dev, "Identified as %s (card=%d)\n", 3242 dev->board.name, dev->model); 3243 3244 dev->tuner_type = em28xx_boards[dev->model].tuner_type; 3245 3246 /* request some modules */ 3247 switch (dev->model) { 3248 case EM2820_BOARD_HAUPPAUGE_WINTV_USB_2: 3249 case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900: 3250 case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2: 3251 case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850: 3252 case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950: 3253 case EM2884_BOARD_HAUPPAUGE_WINTV_HVR_930C: 3254 case EM28174_BOARD_HAUPPAUGE_WINTV_DUALHD_DVB: 3255 case EM28174_BOARD_HAUPPAUGE_WINTV_DUALHD_01595: 3256 { 3257 struct tveeprom tv; 3258 3259 if (!dev->eedata) 3260 break; 3261#if defined(CONFIG_MODULES) && defined(MODULE) 3262 request_module("tveeprom"); 3263#endif 3264 /* Call first TVeeprom */ 3265 3266 tveeprom_hauppauge_analog(&tv, dev->eedata); 3267 3268 dev->tuner_type = tv.tuner_type; 3269 3270 if (tv.audio_processor == TVEEPROM_AUDPROC_MSP) { 3271 dev->i2s_speed = 2048000; 3272 dev->has_msp34xx = 1; 3273 } 3274 break; 3275 } 3276 case EM2882_BOARD_KWORLD_ATSC_315U: 3277 em28xx_write_reg(dev, 0x0d, 0x42); 3278 usleep_range(10000, 11000); 3279 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfd); 3280 usleep_range(10000, 11000); 3281 break; 3282 case EM2820_BOARD_KWORLD_PVRTV2800RF: 3283 /* GPIO enables sound on KWORLD PVR TV 2800RF */ 3284 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xf9); 3285 break; 3286 case EM2820_BOARD_UNKNOWN: 3287 case EM2800_BOARD_UNKNOWN: 3288 /* 3289 * The K-WORLD DVB-T 310U is detected as an MSI Digivox AD. 3290 * 3291 * This occurs because they share identical USB vendor and 3292 * product IDs. 3293 * 3294 * What we do here is look up the EEPROM hash of the K-WORLD 3295 * and if it is found then we decide that we do not have 3296 * a DIGIVOX and reset the device to the K-WORLD instead. 3297 * 3298 * This solution is only valid if they do not share eeprom 3299 * hash identities which has not been determined as yet. 3300 */ 3301 case EM2880_BOARD_MSI_DIGIVOX_AD: 3302 if (!em28xx_hint_board(dev)) 3303 em28xx_set_model(dev); 3304 3305 /* 3306 * In cases where we had to use a board hint, the call to 3307 * em28xx_set_mode() in em28xx_pre_card_setup() was a no-op, 3308 * so make the call now so the analog GPIOs are set properly 3309 * before probing the i2c bus. 3310 */ 3311 em28xx_gpio_set(dev, dev->board.tuner_gpio); 3312 em28xx_set_mode(dev, EM28XX_ANALOG_MODE); 3313 break; 3314 3315 /* 3316 * The Dikom DK300 is detected as an Kworld VS-DVB-T 323UR. 3317 * 3318 * This occurs because they share identical USB vendor and 3319 * product IDs. 3320 * 3321 * What we do here is look up the EEPROM hash of the Dikom 3322 * and if it is found then we decide that we do not have 3323 * a Kworld and reset the device to the Dikom instead. 3324 * 3325 * This solution is only valid if they do not share eeprom 3326 * hash identities which has not been determined as yet. 3327 */ 3328 case EM2882_BOARD_KWORLD_VS_DVBT: 3329 if (!em28xx_hint_board(dev)) 3330 em28xx_set_model(dev); 3331 3332 /* 3333 * In cases where we had to use a board hint, the call to 3334 * em28xx_set_mode() in em28xx_pre_card_setup() was a no-op, 3335 * so make the call now so the analog GPIOs are set properly 3336 * before probing the i2c bus. 3337 */ 3338 em28xx_gpio_set(dev, dev->board.tuner_gpio); 3339 em28xx_set_mode(dev, EM28XX_ANALOG_MODE); 3340 break; 3341 } 3342 3343 if (dev->board.valid == EM28XX_BOARD_NOT_VALIDATED) { 3344 dev_err(&dev->intf->dev, 3345 "\n\n" 3346 "The support for this board weren't valid yet.\n" 3347 "Please send a report of having this working\n" 3348 "not to V4L mailing list (and/or to other addresses)\n\n"); 3349 } 3350 3351 /* Free eeprom data memory */ 3352 kfree(dev->eedata); 3353 dev->eedata = NULL; 3354 3355 /* Allow override tuner type by a module parameter */ 3356 if (tuner >= 0) 3357 dev->tuner_type = tuner; 3358 3359 /* 3360 * Dynamically generate a list of valid audio inputs for this 3361 * specific board, mapping them via enum em28xx_amux. 3362 */ 3363 3364 idx = 0; 3365 for (i = 0; i < MAX_EM28XX_INPUT; i++) { 3366 if (!INPUT(i)->type) 3367 continue; 3368 3369 /* Skip already mapped audio inputs */ 3370 duplicate_entry = false; 3371 for (j = 0; j < idx; j++) { 3372 if (INPUT(i)->amux == dev->amux_map[j]) { 3373 duplicate_entry = true; 3374 break; 3375 } 3376 } 3377 if (duplicate_entry) 3378 continue; 3379 3380 dev->amux_map[idx++] = INPUT(i)->amux; 3381 } 3382 for (; idx < MAX_EM28XX_INPUT; idx++) 3383 dev->amux_map[idx] = EM28XX_AMUX_UNUSED; 3384} 3385 3386void em28xx_setup_xc3028(struct em28xx *dev, struct xc2028_ctrl *ctl) 3387{ 3388 memset(ctl, 0, sizeof(*ctl)); 3389 3390 ctl->fname = XC2028_DEFAULT_FIRMWARE; 3391 ctl->max_len = 64; 3392 ctl->mts = em28xx_boards[dev->model].mts_firmware; 3393 3394 switch (dev->model) { 3395 case EM2880_BOARD_EMPIRE_DUAL_TV: 3396 case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900: 3397 case EM2882_BOARD_TERRATEC_HYBRID_XS: 3398 case EM2880_BOARD_TERRATEC_HYBRID_XS: 3399 case EM2880_BOARD_TERRATEC_HYBRID_XS_FR: 3400 case EM2881_BOARD_PINNACLE_HYBRID_PRO: 3401 case EM2882_BOARD_ZOLID_HYBRID_TV_STICK: 3402 ctl->demod = XC3028_FE_ZARLINK456; 3403 break; 3404 case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2: 3405 case EM2882_BOARD_PINNACLE_HYBRID_PRO_330E: 3406 ctl->demod = XC3028_FE_DEFAULT; 3407 break; 3408 case EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600: 3409 ctl->demod = XC3028_FE_DEFAULT; 3410 ctl->fname = XC3028L_DEFAULT_FIRMWARE; 3411 break; 3412 case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850: 3413 case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950: 3414 case EM2880_BOARD_PINNACLE_PCTV_HD_PRO: 3415 /* FIXME: Better to specify the needed IF */ 3416 ctl->demod = XC3028_FE_DEFAULT; 3417 break; 3418 case EM2883_BOARD_KWORLD_HYBRID_330U: 3419 case EM2882_BOARD_DIKOM_DK300: 3420 case EM2882_BOARD_KWORLD_VS_DVBT: 3421 ctl->demod = XC3028_FE_CHINA; 3422 ctl->fname = XC2028_DEFAULT_FIRMWARE; 3423 break; 3424 case EM2882_BOARD_EVGA_INDTUBE: 3425 ctl->demod = XC3028_FE_CHINA; 3426 ctl->fname = XC3028L_DEFAULT_FIRMWARE; 3427 break; 3428 default: 3429 ctl->demod = XC3028_FE_OREN538; 3430 } 3431} 3432EXPORT_SYMBOL_GPL(em28xx_setup_xc3028); 3433 3434static void request_module_async(struct work_struct *work) 3435{ 3436 struct em28xx *dev = container_of(work, 3437 struct em28xx, request_module_wk); 3438 3439 /* 3440 * The em28xx extensions can be modules or builtin. If the 3441 * modules are already loaded or are built in, those extensions 3442 * can be initialised right now. Otherwise, the module init 3443 * code will do it. 3444 */ 3445 3446 /* 3447 * Devices with an audio-only intf also have a V4L/DVB/RC 3448 * intf. Don't register extensions twice on those devices. 3449 */ 3450 if (dev->is_audio_only) { 3451#if defined(CONFIG_MODULES) && defined(MODULE) 3452 request_module("em28xx-alsa"); 3453#endif 3454 return; 3455 } 3456 3457 em28xx_init_extension(dev); 3458 3459#if defined(CONFIG_MODULES) && defined(MODULE) 3460 if (dev->has_video) 3461 request_module("em28xx-v4l"); 3462 if (dev->usb_audio_type == EM28XX_USB_AUDIO_CLASS) 3463 request_module("snd-usb-audio"); 3464 else if (dev->usb_audio_type == EM28XX_USB_AUDIO_VENDOR) 3465 request_module("em28xx-alsa"); 3466 if (dev->board.has_dvb) 3467 request_module("em28xx-dvb"); 3468 if (dev->board.buttons || 3469 ((dev->board.ir_codes || dev->board.has_ir_i2c) && !disable_ir)) 3470 request_module("em28xx-rc"); 3471#endif /* CONFIG_MODULES */ 3472} 3473 3474static void request_modules(struct em28xx *dev) 3475{ 3476 INIT_WORK(&dev->request_module_wk, request_module_async); 3477 schedule_work(&dev->request_module_wk); 3478} 3479 3480static void flush_request_modules(struct em28xx *dev) 3481{ 3482 flush_work(&dev->request_module_wk); 3483} 3484 3485static int em28xx_media_device_init(struct em28xx *dev, 3486 struct usb_device *udev) 3487{ 3488#ifdef CONFIG_MEDIA_CONTROLLER 3489 struct media_device *mdev; 3490 3491 mdev = kzalloc(sizeof(*mdev), GFP_KERNEL); 3492 if (!mdev) 3493 return -ENOMEM; 3494 3495 if (udev->product) 3496 media_device_usb_init(mdev, udev, udev->product); 3497 else if (udev->manufacturer) 3498 media_device_usb_init(mdev, udev, udev->manufacturer); 3499 else 3500 media_device_usb_init(mdev, udev, dev_name(&dev->intf->dev)); 3501 3502 dev->media_dev = mdev; 3503#endif 3504 return 0; 3505} 3506 3507static void em28xx_unregister_media_device(struct em28xx *dev) 3508{ 3509#ifdef CONFIG_MEDIA_CONTROLLER 3510 if (dev->media_dev) { 3511 media_device_unregister(dev->media_dev); 3512 media_device_cleanup(dev->media_dev); 3513 kfree(dev->media_dev); 3514 dev->media_dev = NULL; 3515 } 3516#endif 3517} 3518 3519/* 3520 * em28xx_release_resources() 3521 * unregisters the v4l2,i2c and usb devices 3522 * called when the device gets disconnected or at module unload 3523 */ 3524static void em28xx_release_resources(struct em28xx *dev) 3525{ 3526 struct usb_device *udev = interface_to_usbdev(dev->intf); 3527 3528 /*FIXME: I2C IR should be disconnected */ 3529 3530 mutex_lock(&dev->lock); 3531 3532 em28xx_unregister_media_device(dev); 3533 3534 if (dev->def_i2c_bus) 3535 em28xx_i2c_unregister(dev, 1); 3536 em28xx_i2c_unregister(dev, 0); 3537 3538 if (dev->ts == PRIMARY_TS) 3539 usb_put_dev(udev); 3540 3541 /* Mark device as unused */ 3542 clear_bit(dev->devno, em28xx_devused); 3543 3544 mutex_unlock(&dev->lock); 3545}; 3546 3547/** 3548 * em28xx_free_device() - Free em28xx device 3549 * 3550 * @ref: struct kref for em28xx device 3551 * 3552 * This is called when all extensions and em28xx core unregisters a device 3553 */ 3554void em28xx_free_device(struct kref *ref) 3555{ 3556 struct em28xx *dev = kref_to_dev(ref); 3557 3558 dev_info(&dev->intf->dev, "Freeing device\n"); 3559 3560 if (!dev->disconnected) 3561 em28xx_release_resources(dev); 3562 3563 if (dev->ts == PRIMARY_TS) 3564 kfree(dev->alt_max_pkt_size_isoc); 3565 3566 kfree(dev); 3567} 3568EXPORT_SYMBOL_GPL(em28xx_free_device); 3569 3570/* 3571 * em28xx_init_dev() 3572 * allocates and inits the device structs, registers i2c bus and v4l device 3573 */ 3574static int em28xx_init_dev(struct em28xx *dev, struct usb_device *udev, 3575 struct usb_interface *intf, 3576 int minor) 3577{ 3578 int retval; 3579 const char *chip_name = NULL; 3580 3581 dev->intf = intf; 3582 mutex_init(&dev->ctrl_urb_lock); 3583 spin_lock_init(&dev->slock); 3584 3585 dev->em28xx_write_regs = em28xx_write_regs; 3586 dev->em28xx_read_reg = em28xx_read_reg; 3587 dev->em28xx_read_reg_req_len = em28xx_read_reg_req_len; 3588 dev->em28xx_write_regs_req = em28xx_write_regs_req; 3589 dev->em28xx_read_reg_req = em28xx_read_reg_req; 3590 dev->board.is_em2800 = em28xx_boards[dev->model].is_em2800; 3591 3592 em28xx_set_model(dev); 3593 3594 dev->wait_after_write = 5; 3595 3596 /* Based on the Chip ID, set the device configuration */ 3597 retval = em28xx_read_reg(dev, EM28XX_R0A_CHIPID); 3598 if (retval > 0) { 3599 dev->chip_id = retval; 3600 3601 switch (dev->chip_id) { 3602 case CHIP_ID_EM2800: 3603 chip_name = "em2800"; 3604 break; 3605 case CHIP_ID_EM2710: 3606 chip_name = "em2710"; 3607 break; 3608 case CHIP_ID_EM2750: 3609 chip_name = "em2750"; 3610 break; 3611 case CHIP_ID_EM2765: 3612 chip_name = "em2765"; 3613 dev->wait_after_write = 0; 3614 dev->is_em25xx = 1; 3615 dev->eeprom_addrwidth_16bit = 1; 3616 break; 3617 case CHIP_ID_EM2820: 3618 chip_name = "em2710/2820"; 3619 if (le16_to_cpu(udev->descriptor.idVendor) == 0xeb1a) { 3620 __le16 idProd = udev->descriptor.idProduct; 3621 3622 if (le16_to_cpu(idProd) == 0x2710) 3623 chip_name = "em2710"; 3624 else if (le16_to_cpu(idProd) == 0x2820) 3625 chip_name = "em2820"; 3626 } 3627 /* NOTE: the em2820 is used in webcams, too ! */ 3628 break; 3629 case CHIP_ID_EM2840: 3630 chip_name = "em2840"; 3631 break; 3632 case CHIP_ID_EM2860: 3633 chip_name = "em2860"; 3634 break; 3635 case CHIP_ID_EM2870: 3636 chip_name = "em2870"; 3637 dev->wait_after_write = 0; 3638 break; 3639 case CHIP_ID_EM2874: 3640 chip_name = "em2874"; 3641 dev->wait_after_write = 0; 3642 dev->eeprom_addrwidth_16bit = 1; 3643 break; 3644 case CHIP_ID_EM28174: 3645 chip_name = "em28174"; 3646 dev->wait_after_write = 0; 3647 dev->eeprom_addrwidth_16bit = 1; 3648 break; 3649 case CHIP_ID_EM28178: 3650 chip_name = "em28178"; 3651 dev->wait_after_write = 0; 3652 dev->eeprom_addrwidth_16bit = 1; 3653 break; 3654 case CHIP_ID_EM2883: 3655 chip_name = "em2882/3"; 3656 dev->wait_after_write = 0; 3657 break; 3658 case CHIP_ID_EM2884: 3659 chip_name = "em2884"; 3660 dev->wait_after_write = 0; 3661 dev->eeprom_addrwidth_16bit = 1; 3662 break; 3663 } 3664 } 3665 if (!chip_name) 3666 dev_info(&dev->intf->dev, 3667 "unknown em28xx chip ID (%d)\n", dev->chip_id); 3668 else 3669 dev_info(&dev->intf->dev, "chip ID is %s\n", chip_name); 3670 3671 em28xx_media_device_init(dev, udev); 3672 3673 if (dev->is_audio_only) { 3674 retval = em28xx_audio_setup(dev); 3675 if (retval) { 3676 retval = -ENODEV; 3677 goto err_deinit_media; 3678 } 3679 em28xx_init_extension(dev); 3680 3681 return 0; 3682 } 3683 3684 em28xx_pre_card_setup(dev); 3685 3686 rt_mutex_init(&dev->i2c_bus_lock); 3687 3688 /* register i2c bus 0 */ 3689 if (dev->board.is_em2800) 3690 retval = em28xx_i2c_register(dev, 0, EM28XX_I2C_ALGO_EM2800); 3691 else 3692 retval = em28xx_i2c_register(dev, 0, EM28XX_I2C_ALGO_EM28XX); 3693 if (retval < 0) { 3694 dev_err(&dev->intf->dev, 3695 "%s: em28xx_i2c_register bus 0 - error [%d]!\n", 3696 __func__, retval); 3697 goto err_deinit_media; 3698 } 3699 3700 /* register i2c bus 1 */ 3701 if (dev->def_i2c_bus) { 3702 if (dev->is_em25xx) 3703 retval = em28xx_i2c_register(dev, 1, 3704 EM28XX_I2C_ALGO_EM25XX_BUS_B); 3705 else 3706 retval = em28xx_i2c_register(dev, 1, 3707 EM28XX_I2C_ALGO_EM28XX); 3708 if (retval < 0) { 3709 dev_err(&dev->intf->dev, 3710 "%s: em28xx_i2c_register bus 1 - error [%d]!\n", 3711 __func__, retval); 3712 3713 goto err_unreg_i2c; 3714 } 3715 } 3716 3717 /* Do board specific init and eeprom reading */ 3718 em28xx_card_setup(dev); 3719 3720 return 0; 3721 3722err_unreg_i2c: 3723 em28xx_i2c_unregister(dev, 0); 3724err_deinit_media: 3725 em28xx_unregister_media_device(dev); 3726 return retval; 3727} 3728 3729static int em28xx_duplicate_dev(struct em28xx *dev) 3730{ 3731 int nr; 3732 struct em28xx *sec_dev = kmemdup(dev, sizeof(*sec_dev), GFP_KERNEL); 3733 3734 if (!sec_dev) { 3735 dev->dev_next = NULL; 3736 return -ENOMEM; 3737 } 3738 /* Check to see next free device and mark as used */ 3739 do { 3740 nr = find_first_zero_bit(em28xx_devused, EM28XX_MAXBOARDS); 3741 if (nr >= EM28XX_MAXBOARDS) { 3742 /* No free device slots */ 3743 dev_warn(&dev->intf->dev, ": Supports only %i em28xx boards.\n", 3744 EM28XX_MAXBOARDS); 3745 kfree(sec_dev); 3746 dev->dev_next = NULL; 3747 return -ENOMEM; 3748 } 3749 } while (test_and_set_bit(nr, em28xx_devused)); 3750 sec_dev->devno = nr; 3751 snprintf(sec_dev->name, 28, "em28xx #%d", nr); 3752 sec_dev->dev_next = NULL; 3753 dev->dev_next = sec_dev; 3754 return 0; 3755} 3756 3757/* high bandwidth multiplier, as encoded in highspeed endpoint descriptors */ 3758#define hb_mult(wMaxPacketSize) (1 + (((wMaxPacketSize) >> 11) & 0x03)) 3759 3760static void em28xx_check_usb_descriptor(struct em28xx *dev, 3761 struct usb_device *udev, 3762 struct usb_interface *intf, 3763 int alt, int ep, 3764 bool *has_vendor_audio, 3765 bool *has_video, 3766 bool *has_dvb) 3767{ 3768 const struct usb_endpoint_descriptor *e; 3769 int sizedescr, size; 3770 3771 /* 3772 * NOTE: 3773 * 3774 * Old logic with support for isoc transfers only was: 3775 * 0x82 isoc => analog 3776 * 0x83 isoc => audio 3777 * 0x84 isoc => digital 3778 * 3779 * New logic with support for bulk transfers 3780 * 0x82 isoc => analog 3781 * 0x82 bulk => analog 3782 * 0x83 isoc* => audio 3783 * 0x84 isoc => digital 3784 * 0x84 bulk => analog or digital** 3785 * 0x85 isoc => digital TS2 3786 * 0x85 bulk => digital TS2 3787 * (*: audio should always be isoc) 3788 * (**: analog, if ep 0x82 is isoc, otherwise digital) 3789 * 3790 * The new logic preserves backwards compatibility and 3791 * reflects the endpoint configurations we have seen 3792 * so far. But there might be devices for which this 3793 * logic is not sufficient... 3794 */ 3795 3796 e = &intf->altsetting[alt].endpoint[ep].desc; 3797 3798 if (!usb_endpoint_dir_in(e)) 3799 return; 3800 3801 sizedescr = le16_to_cpu(e->wMaxPacketSize); 3802 size = sizedescr & 0x7ff; 3803 3804 if (udev->speed == USB_SPEED_HIGH) 3805 size = size * hb_mult(sizedescr); 3806 3807 /* Only inspect input endpoints */ 3808 3809 switch (e->bEndpointAddress) { 3810 case 0x82: 3811 *has_video = true; 3812 if (usb_endpoint_xfer_isoc(e)) { 3813 dev->analog_ep_isoc = e->bEndpointAddress; 3814 dev->alt_max_pkt_size_isoc[alt] = size; 3815 } else if (usb_endpoint_xfer_bulk(e)) { 3816 dev->analog_ep_bulk = e->bEndpointAddress; 3817 } 3818 return; 3819 case 0x83: 3820 if (usb_endpoint_xfer_isoc(e)) 3821 *has_vendor_audio = true; 3822 else 3823 dev_err(&intf->dev, 3824 "error: skipping audio endpoint 0x83, because it uses bulk transfers !\n"); 3825 return; 3826 case 0x84: 3827 if (*has_video && (usb_endpoint_xfer_bulk(e))) { 3828 dev->analog_ep_bulk = e->bEndpointAddress; 3829 } else { 3830 if (usb_endpoint_xfer_isoc(e)) { 3831 if (size > dev->dvb_max_pkt_size_isoc) { 3832 /* 3833 * 2) some manufacturers (e.g. Terratec) 3834 * disable endpoints by setting 3835 * wMaxPacketSize to 0 bytes for all 3836 * alt settings. So far, we've seen 3837 * this for DVB isoc endpoints only. 3838 */ 3839 *has_dvb = true; 3840 dev->dvb_ep_isoc = e->bEndpointAddress; 3841 dev->dvb_max_pkt_size_isoc = size; 3842 dev->dvb_alt_isoc = alt; 3843 } 3844 } else { 3845 *has_dvb = true; 3846 dev->dvb_ep_bulk = e->bEndpointAddress; 3847 } 3848 } 3849 return; 3850 case 0x85: 3851 if (usb_endpoint_xfer_isoc(e)) { 3852 if (size > dev->dvb_max_pkt_size_isoc_ts2) { 3853 dev->dvb_ep_isoc_ts2 = e->bEndpointAddress; 3854 dev->dvb_max_pkt_size_isoc_ts2 = size; 3855 dev->dvb_alt_isoc = alt; 3856 } 3857 } else { 3858 dev->dvb_ep_bulk_ts2 = e->bEndpointAddress; 3859 } 3860 return; 3861 } 3862} 3863 3864/* 3865 * em28xx_usb_probe() 3866 * checks for supported devices 3867 */ 3868static int em28xx_usb_probe(struct usb_interface *intf, 3869 const struct usb_device_id *id) 3870{ 3871 struct usb_device *udev; 3872 struct em28xx *dev = NULL; 3873 int retval; 3874 bool has_vendor_audio = false, has_video = false, has_dvb = false; 3875 int i, nr, try_bulk; 3876 const int ifnum = intf->altsetting[0].desc.bInterfaceNumber; 3877 char *speed; 3878 3879 udev = usb_get_dev(interface_to_usbdev(intf)); 3880 3881 /* Check to see next free device and mark as used */ 3882 do { 3883 nr = find_first_zero_bit(em28xx_devused, EM28XX_MAXBOARDS); 3884 if (nr >= EM28XX_MAXBOARDS) { 3885 /* No free device slots */ 3886 dev_err(&intf->dev, 3887 "Driver supports up to %i em28xx boards.\n", 3888 EM28XX_MAXBOARDS); 3889 retval = -ENOMEM; 3890 goto err_no_slot; 3891 } 3892 } while (test_and_set_bit(nr, em28xx_devused)); 3893 3894 /* Don't register audio interfaces */ 3895 if (intf->altsetting[0].desc.bInterfaceClass == USB_CLASS_AUDIO) { 3896 dev_info(&intf->dev, 3897 "audio device (%04x:%04x): interface %i, class %i\n", 3898 le16_to_cpu(udev->descriptor.idVendor), 3899 le16_to_cpu(udev->descriptor.idProduct), 3900 ifnum, 3901 intf->altsetting[0].desc.bInterfaceClass); 3902 3903 retval = -ENODEV; 3904 goto err; 3905 } 3906 3907 /* allocate memory for our device state and initialize it */ 3908 dev = kzalloc(sizeof(*dev), GFP_KERNEL); 3909 if (!dev) { 3910 retval = -ENOMEM; 3911 goto err; 3912 } 3913 3914 /* compute alternate max packet sizes */ 3915 dev->alt_max_pkt_size_isoc = kcalloc(intf->num_altsetting, 3916 sizeof(dev->alt_max_pkt_size_isoc[0]), 3917 GFP_KERNEL); 3918 if (!dev->alt_max_pkt_size_isoc) { 3919 kfree(dev); 3920 retval = -ENOMEM; 3921 goto err; 3922 } 3923 3924 /* Get endpoints */ 3925 for (i = 0; i < intf->num_altsetting; i++) { 3926 int ep; 3927 3928 for (ep = 0; 3929 ep < intf->altsetting[i].desc.bNumEndpoints; 3930 ep++) 3931 em28xx_check_usb_descriptor(dev, udev, intf, 3932 i, ep, 3933 &has_vendor_audio, 3934 &has_video, 3935 &has_dvb); 3936 } 3937 3938 if (!(has_vendor_audio || has_video || has_dvb)) { 3939 retval = -ENODEV; 3940 goto err_free; 3941 } 3942 3943 switch (udev->speed) { 3944 case USB_SPEED_LOW: 3945 speed = "1.5"; 3946 break; 3947 case USB_SPEED_UNKNOWN: 3948 case USB_SPEED_FULL: 3949 speed = "12"; 3950 break; 3951 case USB_SPEED_HIGH: 3952 speed = "480"; 3953 break; 3954 default: 3955 speed = "unknown"; 3956 } 3957 3958 dev_info(&intf->dev, 3959 "New device %s %s @ %s Mbps (%04x:%04x, interface %d, class %d)\n", 3960 udev->manufacturer ? udev->manufacturer : "", 3961 udev->product ? udev->product : "", 3962 speed, 3963 le16_to_cpu(udev->descriptor.idVendor), 3964 le16_to_cpu(udev->descriptor.idProduct), 3965 ifnum, 3966 intf->altsetting->desc.bInterfaceNumber); 3967 3968 /* 3969 * Make sure we have 480 Mbps of bandwidth, otherwise things like 3970 * video stream wouldn't likely work, since 12 Mbps is generally 3971 * not enough even for most Digital TV streams. 3972 */ 3973 if (udev->speed != USB_SPEED_HIGH && disable_usb_speed_check == 0) { 3974 dev_err(&intf->dev, "Device initialization failed.\n"); 3975 dev_err(&intf->dev, 3976 "Device must be connected to a high-speed USB 2.0 port.\n"); 3977 retval = -ENODEV; 3978 goto err_free; 3979 } 3980 3981 kref_init(&dev->ref); 3982 3983 dev->devno = nr; 3984 dev->model = id->driver_info; 3985 dev->alt = -1; 3986 dev->is_audio_only = has_vendor_audio && !(has_video || has_dvb); 3987 dev->has_video = has_video; 3988 dev->ifnum = ifnum; 3989 3990 dev->ts = PRIMARY_TS; 3991 snprintf(dev->name, 28, "em28xx"); 3992 dev->dev_next = NULL; 3993 3994 if (has_vendor_audio) { 3995 dev_info(&intf->dev, 3996 "Audio interface %i found (Vendor Class)\n", ifnum); 3997 dev->usb_audio_type = EM28XX_USB_AUDIO_VENDOR; 3998 } 3999 /* Checks if audio is provided by a USB Audio Class intf */ 4000 for (i = 0; i < udev->config->desc.bNumInterfaces; i++) { 4001 struct usb_interface *uif = udev->config->interface[i]; 4002 4003 if (uif->altsetting[0].desc.bInterfaceClass == USB_CLASS_AUDIO) { 4004 if (has_vendor_audio) 4005 dev_err(&intf->dev, 4006 "em28xx: device seems to have vendor AND usb audio class interfaces !\n" 4007 "\t\tThe vendor interface will be ignored. Please contact the developers <linux-media@vger.kernel.org>\n"); 4008 dev->usb_audio_type = EM28XX_USB_AUDIO_CLASS; 4009 break; 4010 } 4011 } 4012 4013 if (has_video) 4014 dev_info(&intf->dev, "Video interface %i found:%s%s\n", 4015 ifnum, 4016 dev->analog_ep_bulk ? " bulk" : "", 4017 dev->analog_ep_isoc ? " isoc" : ""); 4018 if (has_dvb) 4019 dev_info(&intf->dev, "DVB interface %i found:%s%s\n", 4020 ifnum, 4021 dev->dvb_ep_bulk ? " bulk" : "", 4022 dev->dvb_ep_isoc ? " isoc" : ""); 4023 4024 dev->num_alt = intf->num_altsetting; 4025 4026 if ((unsigned int)card[nr] < em28xx_bcount) 4027 dev->model = card[nr]; 4028 4029 /* save our data pointer in this intf device */ 4030 usb_set_intfdata(intf, dev); 4031 4032 /* allocate device struct and check if the device is a webcam */ 4033 mutex_init(&dev->lock); 4034 retval = em28xx_init_dev(dev, udev, intf, nr); 4035 if (retval) 4036 goto err_free; 4037 4038 if (usb_xfer_mode < 0) { 4039 if (dev->is_webcam) 4040 try_bulk = 1; 4041 else 4042 try_bulk = 0; 4043 } else { 4044 try_bulk = usb_xfer_mode > 0; 4045 } 4046 4047 /* Disable V4L2 if the device doesn't have a decoder or image sensor */ 4048 if (has_video && 4049 dev->board.decoder == EM28XX_NODECODER && 4050 dev->em28xx_sensor == EM28XX_NOSENSOR) { 4051 dev_err(&intf->dev, 4052 "Currently, V4L2 is not supported on this model\n"); 4053 has_video = false; 4054 dev->has_video = false; 4055 } 4056 4057 if (dev->board.has_dual_ts && 4058 (dev->tuner_type != TUNER_ABSENT || INPUT(0)->type)) { 4059 /* 4060 * The logic with sets alternate is not ready for dual-tuners 4061 * which analog modes. 4062 */ 4063 dev_err(&intf->dev, 4064 "We currently don't support analog TV or stream capture on dual tuners.\n"); 4065 has_video = false; 4066 } 4067 4068 /* Select USB transfer types to use */ 4069 if (has_video) { 4070 if (!dev->analog_ep_isoc || (try_bulk && dev->analog_ep_bulk)) 4071 dev->analog_xfer_bulk = 1; 4072 dev_info(&intf->dev, "analog set to %s mode.\n", 4073 dev->analog_xfer_bulk ? "bulk" : "isoc"); 4074 } 4075 if (has_dvb) { 4076 if (!dev->dvb_ep_isoc || (try_bulk && dev->dvb_ep_bulk)) 4077 dev->dvb_xfer_bulk = 1; 4078 dev_info(&intf->dev, "dvb set to %s mode.\n", 4079 dev->dvb_xfer_bulk ? "bulk" : "isoc"); 4080 } 4081 4082 if (dev->board.has_dual_ts && em28xx_duplicate_dev(dev) == 0) { 4083 kref_init(&dev->dev_next->ref); 4084 4085 dev->dev_next->ts = SECONDARY_TS; 4086 dev->dev_next->alt = -1; 4087 dev->dev_next->is_audio_only = has_vendor_audio && 4088 !(has_video || has_dvb); 4089 dev->dev_next->has_video = false; 4090 dev->dev_next->ifnum = ifnum; 4091 dev->dev_next->model = id->driver_info; 4092 4093 mutex_init(&dev->dev_next->lock); 4094 retval = em28xx_init_dev(dev->dev_next, udev, intf, 4095 dev->dev_next->devno); 4096 if (retval) 4097 goto err_free; 4098 4099 dev->dev_next->board.ir_codes = NULL; /* No IR for 2nd tuner */ 4100 dev->dev_next->board.has_ir_i2c = 0; /* No IR for 2nd tuner */ 4101 4102 if (usb_xfer_mode < 0) { 4103 if (dev->dev_next->is_webcam) 4104 try_bulk = 1; 4105 else 4106 try_bulk = 0; 4107 } else { 4108 try_bulk = usb_xfer_mode > 0; 4109 } 4110 4111 /* Select USB transfer types to use */ 4112 if (has_dvb) { 4113 if (!dev->dvb_ep_isoc_ts2 || 4114 (try_bulk && dev->dvb_ep_bulk_ts2)) 4115 dev->dev_next->dvb_xfer_bulk = 1; 4116 dev_info(&dev->intf->dev, "dvb ts2 set to %s mode.\n", 4117 dev->dev_next->dvb_xfer_bulk ? "bulk" : "isoc"); 4118 } 4119 4120 dev->dev_next->dvb_ep_isoc = dev->dvb_ep_isoc_ts2; 4121 dev->dev_next->dvb_ep_bulk = dev->dvb_ep_bulk_ts2; 4122 dev->dev_next->dvb_max_pkt_size_isoc = dev->dvb_max_pkt_size_isoc_ts2; 4123 dev->dev_next->dvb_alt_isoc = dev->dvb_alt_isoc; 4124 4125 /* Configure hardware to support TS2*/ 4126 if (dev->dvb_xfer_bulk) { 4127 /* The ep4 and ep5 are configured for BULK */ 4128 em28xx_write_reg(dev, 0x0b, 0x96); 4129 mdelay(100); 4130 em28xx_write_reg(dev, 0x0b, 0x80); 4131 mdelay(100); 4132 } else { 4133 /* The ep4 and ep5 are configured for ISO */ 4134 em28xx_write_reg(dev, 0x0b, 0x96); 4135 mdelay(100); 4136 em28xx_write_reg(dev, 0x0b, 0x82); 4137 mdelay(100); 4138 } 4139 } 4140 4141 request_modules(dev); 4142 4143 /* 4144 * Do it at the end, to reduce dynamic configuration changes during 4145 * the device init. Yet, as request_modules() can be async, the 4146 * topology will likely change after the load of the em28xx subdrivers. 4147 */ 4148#ifdef CONFIG_MEDIA_CONTROLLER 4149 /* 4150 * No need to check the return value, the device will still be 4151 * usable without media controller API. 4152 */ 4153 retval = media_device_register(dev->media_dev); 4154#endif 4155 4156 return 0; 4157 4158err_free: 4159 kfree(dev->alt_max_pkt_size_isoc); 4160 kfree(dev); 4161 4162err: 4163 clear_bit(nr, em28xx_devused); 4164 4165err_no_slot: 4166 usb_put_dev(udev); 4167 return retval; 4168} 4169 4170/* 4171 * em28xx_usb_disconnect() 4172 * called when the device gets disconnected 4173 * video device will be unregistered on v4l2_close in case it is still open 4174 */ 4175static void em28xx_usb_disconnect(struct usb_interface *intf) 4176{ 4177 struct em28xx *dev; 4178 4179 dev = usb_get_intfdata(intf); 4180 usb_set_intfdata(intf, NULL); 4181 4182 if (!dev) 4183 return; 4184 4185 if (dev->dev_next) { 4186 dev->dev_next->disconnected = 1; 4187 dev_info(&dev->intf->dev, "Disconnecting %s\n", 4188 dev->dev_next->name); 4189 } 4190 4191 dev->disconnected = 1; 4192 4193 dev_info(&dev->intf->dev, "Disconnecting %s\n", dev->name); 4194 4195 flush_request_modules(dev); 4196 4197 em28xx_close_extension(dev); 4198 4199 if (dev->dev_next) 4200 em28xx_release_resources(dev->dev_next); 4201 em28xx_release_resources(dev); 4202 4203 if (dev->dev_next) { 4204 kref_put(&dev->dev_next->ref, em28xx_free_device); 4205 dev->dev_next = NULL; 4206 } 4207 kref_put(&dev->ref, em28xx_free_device); 4208} 4209 4210static int em28xx_usb_suspend(struct usb_interface *intf, 4211 pm_message_t message) 4212{ 4213 struct em28xx *dev; 4214 4215 dev = usb_get_intfdata(intf); 4216 if (!dev) 4217 return 0; 4218 em28xx_suspend_extension(dev); 4219 return 0; 4220} 4221 4222static int em28xx_usb_resume(struct usb_interface *intf) 4223{ 4224 struct em28xx *dev; 4225 4226 dev = usb_get_intfdata(intf); 4227 if (!dev) 4228 return 0; 4229 em28xx_resume_extension(dev); 4230 return 0; 4231} 4232 4233static struct usb_driver em28xx_usb_driver = { 4234 .name = "em28xx", 4235 .probe = em28xx_usb_probe, 4236 .disconnect = em28xx_usb_disconnect, 4237 .suspend = em28xx_usb_suspend, 4238 .resume = em28xx_usb_resume, 4239 .reset_resume = em28xx_usb_resume, 4240 .id_table = em28xx_id_table, 4241}; 4242 4243module_usb_driver(em28xx_usb_driver);
~/
Read-only file preview.