FILE
ar0521.c
File preview with syntax highlighting.
linux-6.19.14/drivers/media/i2c/ar0521.c
1// SPDX-License-Identifier: GPL-2.0 2/* 3 * Copyright (C) 2021 Sieć Badawcza Łukasiewicz 4 * - Przemysłowy Instytut Automatyki i Pomiarów PIAP 5 * Written by Krzysztof Hałasa 6 */ 7 8#include <linux/clk.h> 9#include <linux/delay.h> 10#include <linux/pm_runtime.h> 11 12#include <media/v4l2-ctrls.h> 13#include <media/v4l2-fwnode.h> 14#include <media/v4l2-subdev.h> 15 16/* External clock (extclk) frequencies */ 17#define AR0521_EXTCLK_MIN (10 * 1000 * 1000) 18#define AR0521_EXTCLK_MAX (48 * 1000 * 1000) 19 20/* PLL and PLL2 */ 21#define AR0521_PLL_MIN (320 * 1000 * 1000) 22#define AR0521_PLL_MAX (1280 * 1000 * 1000) 23 24/* Effective pixel sample rate on the pixel array. */ 25#define AR0521_PIXEL_CLOCK_RATE (184 * 1000 * 1000) 26#define AR0521_PIXEL_CLOCK_MIN (168 * 1000 * 1000) 27#define AR0521_PIXEL_CLOCK_MAX (414 * 1000 * 1000) 28 29#define AR0521_NATIVE_WIDTH 2604u 30#define AR0521_NATIVE_HEIGHT 1964u 31#define AR0521_MIN_X_ADDR_START 0u 32#define AR0521_MIN_Y_ADDR_START 0u 33#define AR0521_MAX_X_ADDR_END 2603u 34#define AR0521_MAX_Y_ADDR_END 1955u 35 36#define AR0521_WIDTH_MIN 8u 37#define AR0521_WIDTH_MAX 2592u 38#define AR0521_HEIGHT_MIN 8u 39#define AR0521_HEIGHT_MAX 1944u 40 41#define AR0521_WIDTH_BLANKING_MIN 572u 42#define AR0521_HEIGHT_BLANKING_MIN 38u /* must be even */ 43#define AR0521_TOTAL_HEIGHT_MAX 65535u /* max_frame_length_lines */ 44#define AR0521_TOTAL_WIDTH_MAX 65532u /* max_line_length_pck */ 45 46#define AR0521_ANA_GAIN_MIN 0x00 47#define AR0521_ANA_GAIN_MAX 0x3f 48#define AR0521_ANA_GAIN_STEP 0x01 49#define AR0521_ANA_GAIN_DEFAULT 0x00 50 51/* AR0521 registers */ 52#define AR0521_REG_VT_PIX_CLK_DIV 0x0300 53#define AR0521_REG_FRAME_LENGTH_LINES 0x0340 54 55#define AR0521_REG_CHIP_ID 0x3000 56#define AR0521_REG_COARSE_INTEGRATION_TIME 0x3012 57#define AR0521_REG_ROW_SPEED 0x3016 58#define AR0521_REG_EXTRA_DELAY 0x3018 59#define AR0521_REG_RESET 0x301A 60#define AR0521_REG_RESET_DEFAULTS 0x0238 61#define AR0521_REG_RESET_GROUP_PARAM_HOLD 0x8000 62#define AR0521_REG_RESET_STREAM BIT(2) 63#define AR0521_REG_RESET_RESTART BIT(1) 64#define AR0521_REG_RESET_INIT BIT(0) 65 66#define AR0521_REG_ANA_GAIN_CODE_GLOBAL 0x3028 67 68#define AR0521_REG_GREEN1_GAIN 0x3056 69#define AR0521_REG_BLUE_GAIN 0x3058 70#define AR0521_REG_RED_GAIN 0x305A 71#define AR0521_REG_GREEN2_GAIN 0x305C 72#define AR0521_REG_GLOBAL_GAIN 0x305E 73 74#define AR0521_REG_HISPI_TEST_MODE 0x3066 75#define AR0521_REG_HISPI_TEST_MODE_LP11 0x0004 76 77#define AR0521_REG_TEST_PATTERN_MODE 0x3070 78 79#define AR0521_REG_SERIAL_FORMAT 0x31AE 80#define AR0521_REG_SERIAL_FORMAT_MIPI 0x0200 81 82#define AR0521_REG_HISPI_CONTROL_STATUS 0x31C6 83#define AR0521_REG_HISPI_CONTROL_STATUS_FRAMER_TEST_MODE_ENABLE 0x80 84 85#define be cpu_to_be16 86 87static const char * const ar0521_supply_names[] = { 88 "vdd_io", /* I/O (1.8V) supply */ 89 "vdd", /* Core, PLL and MIPI (1.2V) supply */ 90 "vaa", /* Analog (2.7V) supply */ 91}; 92 93static const s64 ar0521_link_frequencies[] = { 94 184000000, 95}; 96 97struct ar0521_ctrls { 98 struct v4l2_ctrl_handler handler; 99 struct { 100 struct v4l2_ctrl *gain; 101 struct v4l2_ctrl *red_balance; 102 struct v4l2_ctrl *blue_balance; 103 }; 104 struct { 105 struct v4l2_ctrl *hblank; 106 struct v4l2_ctrl *vblank; 107 }; 108 struct v4l2_ctrl *pixrate; 109 struct v4l2_ctrl *exposure; 110 struct v4l2_ctrl *test_pattern; 111}; 112 113struct ar0521_dev { 114 struct i2c_client *i2c_client; 115 struct v4l2_subdev sd; 116 struct media_pad pad; 117 struct clk *extclk; 118 u32 extclk_freq; 119 120 struct regulator *supplies[ARRAY_SIZE(ar0521_supply_names)]; 121 struct gpio_desc *reset_gpio; 122 123 /* lock to protect all members below */ 124 struct mutex lock; 125 126 struct v4l2_mbus_framefmt fmt; 127 struct ar0521_ctrls ctrls; 128 unsigned int lane_count; 129 struct { 130 u16 pre; 131 u16 mult; 132 u16 pre2; 133 u16 mult2; 134 u16 vt_pix; 135 } pll; 136}; 137 138static inline struct ar0521_dev *to_ar0521_dev(struct v4l2_subdev *sd) 139{ 140 return container_of(sd, struct ar0521_dev, sd); 141} 142 143static inline struct v4l2_subdev *ctrl_to_sd(struct v4l2_ctrl *ctrl) 144{ 145 return &container_of(ctrl->handler, struct ar0521_dev, 146 ctrls.handler)->sd; 147} 148 149static u32 div64_round(u64 v, u32 d) 150{ 151 return div_u64(v + (d >> 1), d); 152} 153 154static u32 div64_round_up(u64 v, u32 d) 155{ 156 return div_u64(v + d - 1, d); 157} 158 159static int ar0521_code_to_bpp(struct ar0521_dev *sensor) 160{ 161 switch (sensor->fmt.code) { 162 case MEDIA_BUS_FMT_SGRBG8_1X8: 163 return 8; 164 } 165 166 return -EINVAL; 167} 168 169/* Data must be BE16, the first value is the register address */ 170static int ar0521_write_regs(struct ar0521_dev *sensor, const __be16 *data, 171 unsigned int count) 172{ 173 struct i2c_client *client = sensor->i2c_client; 174 struct i2c_msg msg; 175 int ret; 176 177 msg.addr = client->addr; 178 msg.flags = client->flags; 179 msg.buf = (u8 *)data; 180 msg.len = count * sizeof(*data); 181 182 ret = i2c_transfer(client->adapter, &msg, 1); 183 184 if (ret < 0) { 185 v4l2_err(&sensor->sd, "%s: I2C write error\n", __func__); 186 return ret; 187 } 188 189 return 0; 190} 191 192static int ar0521_write_reg(struct ar0521_dev *sensor, u16 reg, u16 val) 193{ 194 __be16 buf[2] = {be(reg), be(val)}; 195 196 return ar0521_write_regs(sensor, buf, 2); 197} 198 199static int ar0521_set_geometry(struct ar0521_dev *sensor) 200{ 201 /* Center the image in the visible output window. */ 202 u16 x = clamp((AR0521_WIDTH_MAX - sensor->fmt.width) / 2, 203 AR0521_MIN_X_ADDR_START, AR0521_MAX_X_ADDR_END); 204 u16 y = clamp(((AR0521_HEIGHT_MAX - sensor->fmt.height) / 2) & ~1, 205 AR0521_MIN_Y_ADDR_START, AR0521_MAX_Y_ADDR_END); 206 207 /* All dimensions are unsigned 12-bit integers */ 208 __be16 regs[] = { 209 be(AR0521_REG_FRAME_LENGTH_LINES), 210 be(sensor->fmt.height + sensor->ctrls.vblank->val), 211 be(sensor->fmt.width + sensor->ctrls.hblank->val), 212 be(x), 213 be(y), 214 be(x + sensor->fmt.width - 1), 215 be(y + sensor->fmt.height - 1), 216 be(sensor->fmt.width), 217 be(sensor->fmt.height) 218 }; 219 220 return ar0521_write_regs(sensor, regs, ARRAY_SIZE(regs)); 221} 222 223static int ar0521_set_gains(struct ar0521_dev *sensor) 224{ 225 int green = sensor->ctrls.gain->val; 226 int red = max(green + sensor->ctrls.red_balance->val, 0); 227 int blue = max(green + sensor->ctrls.blue_balance->val, 0); 228 unsigned int gain = min(red, min(green, blue)); 229 unsigned int analog = min(gain, 64u); /* range is 0 - 127 */ 230 __be16 regs[5]; 231 232 red = min(red - analog + 64, 511u); 233 green = min(green - analog + 64, 511u); 234 blue = min(blue - analog + 64, 511u); 235 regs[0] = be(AR0521_REG_GREEN1_GAIN); 236 regs[1] = be(green << 7 | analog); 237 regs[2] = be(blue << 7 | analog); 238 regs[3] = be(red << 7 | analog); 239 regs[4] = be(green << 7 | analog); 240 241 return ar0521_write_regs(sensor, regs, ARRAY_SIZE(regs)); 242} 243 244static u32 calc_pll(struct ar0521_dev *sensor, u32 freq, u16 *pre_ptr, u16 *mult_ptr) 245{ 246 u16 pre = 1, mult = 1, new_pre; 247 u32 pll = AR0521_PLL_MAX + 1; 248 249 for (new_pre = 1; new_pre < 64; new_pre++) { 250 u32 new_pll; 251 u32 new_mult = div64_round_up((u64)freq * new_pre, 252 sensor->extclk_freq); 253 254 if (new_mult < 32) 255 continue; /* Minimum value */ 256 if (new_mult > 254) 257 break; /* Maximum, larger pre won't work either */ 258 if (sensor->extclk_freq * (u64)new_mult < (u64)AR0521_PLL_MIN * 259 new_pre) 260 continue; 261 if (sensor->extclk_freq * (u64)new_mult > (u64)AR0521_PLL_MAX * 262 new_pre) 263 break; /* Larger pre won't work either */ 264 new_pll = div64_round_up(sensor->extclk_freq * (u64)new_mult, 265 new_pre); 266 if (new_pll < pll) { 267 pll = new_pll; 268 pre = new_pre; 269 mult = new_mult; 270 } 271 } 272 273 pll = div64_round(sensor->extclk_freq * (u64)mult, pre); 274 *pre_ptr = pre; 275 *mult_ptr = mult; 276 return pll; 277} 278 279static void ar0521_calc_pll(struct ar0521_dev *sensor) 280{ 281 unsigned int pixel_clock; 282 u16 pre, mult; 283 u32 vco; 284 int bpp; 285 286 /* 287 * PLL1 and PLL2 are computed equally even if the application note 288 * suggests a slower PLL1 clock. Maintain pll1 and pll2 divider and 289 * multiplier separated to later specialize the calculation procedure. 290 * 291 * PLL1: 292 * - mclk -> / pre_div1 * pre_mul1 = VCO1 = COUNTER_CLOCK 293 * 294 * PLL2: 295 * - mclk -> / pre_div * pre_mul = VCO 296 * 297 * VCO -> / vt_pix = PIXEL_CLOCK 298 * VCO -> / vt_pix / 2 = WORD_CLOCK 299 * VCO -> / op_sys = SERIAL_CLOCK 300 * 301 * With: 302 * - vt_pix = bpp / 2 303 * - WORD_CLOCK = PIXEL_CLOCK / 2 304 * - SERIAL_CLOCK = MIPI data rate (Mbps / lane) = WORD_CLOCK * bpp 305 * NOTE: this implies the MIPI clock is divided internally by 2 306 * to account for DDR. 307 * 308 * As op_sys_div is fixed to 1: 309 * 310 * SERIAL_CLOCK = VCO 311 * VCO = 2 * MIPI_CLK 312 * VCO = PIXEL_CLOCK * bpp / 2 313 * 314 * In the clock tree: 315 * MIPI_CLK = PIXEL_CLOCK * bpp / 2 / 2 316 * 317 * Generic pixel_rate to bus clock frequency equation: 318 * MIPI_CLK = V4L2_CID_PIXEL_RATE * bpp / lanes / 2 319 * 320 * From which we derive the PIXEL_CLOCK to use in the clock tree: 321 * PIXEL_CLOCK = V4L2_CID_PIXEL_RATE * 2 / lanes 322 * 323 * Documented clock ranges: 324 * WORD_CLOCK = (35MHz - 120 MHz) 325 * PIXEL_CLOCK = (84MHz - 207MHz) 326 * VCO = (320MHz - 1280MHz) 327 * 328 * TODO: in case we have less data lanes we have to reduce the desired 329 * VCO not to exceed the limits specified by the datasheet and 330 * consequently reduce the obtained pixel clock. 331 */ 332 pixel_clock = AR0521_PIXEL_CLOCK_RATE * 2 / sensor->lane_count; 333 bpp = ar0521_code_to_bpp(sensor); 334 sensor->pll.vt_pix = bpp / 2; 335 vco = pixel_clock * sensor->pll.vt_pix; 336 337 calc_pll(sensor, vco, &pre, &mult); 338 339 sensor->pll.pre = sensor->pll.pre2 = pre; 340 sensor->pll.mult = sensor->pll.mult2 = mult; 341} 342 343static int ar0521_pll_config(struct ar0521_dev *sensor) 344{ 345 __be16 pll_regs[] = { 346 be(AR0521_REG_VT_PIX_CLK_DIV), 347 /* 0x300 */ be(sensor->pll.vt_pix), /* vt_pix_clk_div = bpp / 2 */ 348 /* 0x302 */ be(1), /* vt_sys_clk_div */ 349 /* 0x304 */ be((sensor->pll.pre2 << 8) | sensor->pll.pre), 350 /* 0x306 */ be((sensor->pll.mult2 << 8) | sensor->pll.mult), 351 /* 0x308 */ be(sensor->pll.vt_pix * 2), /* op_pix_clk_div = 2 * vt_pix_clk_div */ 352 /* 0x30A */ be(1) /* op_sys_clk_div */ 353 }; 354 355 ar0521_calc_pll(sensor); 356 return ar0521_write_regs(sensor, pll_regs, ARRAY_SIZE(pll_regs)); 357} 358 359static int ar0521_set_stream(struct ar0521_dev *sensor, bool on) 360{ 361 int ret; 362 363 if (on) { 364 ret = pm_runtime_resume_and_get(&sensor->i2c_client->dev); 365 if (ret < 0) 366 return ret; 367 368 /* Stop streaming for just a moment */ 369 ret = ar0521_write_reg(sensor, AR0521_REG_RESET, 370 AR0521_REG_RESET_DEFAULTS); 371 if (ret) 372 return ret; 373 374 ret = ar0521_set_geometry(sensor); 375 if (ret) 376 return ret; 377 378 ret = ar0521_pll_config(sensor); 379 if (ret) 380 goto err; 381 382 ret = __v4l2_ctrl_handler_setup(&sensor->ctrls.handler); 383 if (ret) 384 goto err; 385 386 /* Exit LP-11 mode on clock and data lanes */ 387 ret = ar0521_write_reg(sensor, AR0521_REG_HISPI_CONTROL_STATUS, 388 0); 389 if (ret) 390 goto err; 391 392 /* Start streaming */ 393 ret = ar0521_write_reg(sensor, AR0521_REG_RESET, 394 AR0521_REG_RESET_DEFAULTS | 395 AR0521_REG_RESET_STREAM); 396 if (ret) 397 goto err; 398 399 return 0; 400 401err: 402 pm_runtime_put(&sensor->i2c_client->dev); 403 return ret; 404 405 } else { 406 /* 407 * Reset gain, the sensor may produce all white pixels without 408 * this 409 */ 410 ret = ar0521_write_reg(sensor, AR0521_REG_GLOBAL_GAIN, 0x2000); 411 if (ret) 412 return ret; 413 414 /* Stop streaming */ 415 ret = ar0521_write_reg(sensor, AR0521_REG_RESET, 416 AR0521_REG_RESET_DEFAULTS); 417 if (ret) 418 return ret; 419 420 pm_runtime_put(&sensor->i2c_client->dev); 421 return 0; 422 } 423} 424 425static void ar0521_adj_fmt(struct v4l2_mbus_framefmt *fmt) 426{ 427 fmt->width = clamp(ALIGN(fmt->width, 4), AR0521_WIDTH_MIN, 428 AR0521_WIDTH_MAX); 429 fmt->height = clamp(ALIGN(fmt->height, 4), AR0521_HEIGHT_MIN, 430 AR0521_HEIGHT_MAX); 431 fmt->code = MEDIA_BUS_FMT_SGRBG8_1X8; 432 fmt->field = V4L2_FIELD_NONE; 433 fmt->colorspace = V4L2_COLORSPACE_SRGB; 434 fmt->ycbcr_enc = V4L2_YCBCR_ENC_DEFAULT; 435 fmt->quantization = V4L2_QUANTIZATION_FULL_RANGE; 436 fmt->xfer_func = V4L2_XFER_FUNC_DEFAULT; 437} 438 439static int ar0521_get_fmt(struct v4l2_subdev *sd, 440 struct v4l2_subdev_state *sd_state, 441 struct v4l2_subdev_format *format) 442{ 443 struct ar0521_dev *sensor = to_ar0521_dev(sd); 444 struct v4l2_mbus_framefmt *fmt; 445 446 mutex_lock(&sensor->lock); 447 448 if (format->which == V4L2_SUBDEV_FORMAT_TRY) 449 fmt = v4l2_subdev_state_get_format(sd_state, 0); 450 else 451 fmt = &sensor->fmt; 452 453 format->format = *fmt; 454 455 mutex_unlock(&sensor->lock); 456 return 0; 457} 458 459static int ar0521_set_fmt(struct v4l2_subdev *sd, 460 struct v4l2_subdev_state *sd_state, 461 struct v4l2_subdev_format *format) 462{ 463 struct ar0521_dev *sensor = to_ar0521_dev(sd); 464 int max_vblank, max_hblank, exposure_max; 465 int ret; 466 467 ar0521_adj_fmt(&format->format); 468 469 mutex_lock(&sensor->lock); 470 471 if (format->which == V4L2_SUBDEV_FORMAT_TRY) { 472 struct v4l2_mbus_framefmt *fmt; 473 474 fmt = v4l2_subdev_state_get_format(sd_state, 0); 475 *fmt = format->format; 476 477 mutex_unlock(&sensor->lock); 478 479 return 0; 480 } 481 482 sensor->fmt = format->format; 483 ar0521_calc_pll(sensor); 484 485 /* 486 * Update the exposure and blankings limits. Blankings are also reset 487 * to the minimum. 488 */ 489 max_hblank = AR0521_TOTAL_WIDTH_MAX - sensor->fmt.width; 490 ret = __v4l2_ctrl_modify_range(sensor->ctrls.hblank, 491 sensor->ctrls.hblank->minimum, 492 max_hblank, sensor->ctrls.hblank->step, 493 sensor->ctrls.hblank->minimum); 494 if (ret) 495 goto unlock; 496 497 ret = __v4l2_ctrl_s_ctrl(sensor->ctrls.hblank, 498 sensor->ctrls.hblank->minimum); 499 if (ret) 500 goto unlock; 501 502 max_vblank = AR0521_TOTAL_HEIGHT_MAX - sensor->fmt.height; 503 ret = __v4l2_ctrl_modify_range(sensor->ctrls.vblank, 504 sensor->ctrls.vblank->minimum, 505 max_vblank, sensor->ctrls.vblank->step, 506 sensor->ctrls.vblank->minimum); 507 if (ret) 508 goto unlock; 509 510 ret = __v4l2_ctrl_s_ctrl(sensor->ctrls.vblank, 511 sensor->ctrls.vblank->minimum); 512 if (ret) 513 goto unlock; 514 515 exposure_max = sensor->fmt.height + AR0521_HEIGHT_BLANKING_MIN - 4; 516 ret = __v4l2_ctrl_modify_range(sensor->ctrls.exposure, 517 sensor->ctrls.exposure->minimum, 518 exposure_max, 519 sensor->ctrls.exposure->step, 520 sensor->ctrls.exposure->default_value); 521unlock: 522 mutex_unlock(&sensor->lock); 523 524 return ret; 525} 526 527static int ar0521_s_ctrl(struct v4l2_ctrl *ctrl) 528{ 529 struct v4l2_subdev *sd = ctrl_to_sd(ctrl); 530 struct ar0521_dev *sensor = to_ar0521_dev(sd); 531 int exp_max; 532 int ret; 533 534 /* v4l2_ctrl_lock() locks our own mutex */ 535 536 switch (ctrl->id) { 537 case V4L2_CID_VBLANK: 538 exp_max = sensor->fmt.height + ctrl->val - 4; 539 __v4l2_ctrl_modify_range(sensor->ctrls.exposure, 540 sensor->ctrls.exposure->minimum, 541 exp_max, sensor->ctrls.exposure->step, 542 sensor->ctrls.exposure->default_value); 543 break; 544 } 545 546 /* access the sensor only if it's powered up */ 547 if (!pm_runtime_get_if_in_use(&sensor->i2c_client->dev)) 548 return 0; 549 550 switch (ctrl->id) { 551 case V4L2_CID_HBLANK: 552 case V4L2_CID_VBLANK: 553 ret = ar0521_set_geometry(sensor); 554 break; 555 case V4L2_CID_ANALOGUE_GAIN: 556 ret = ar0521_write_reg(sensor, AR0521_REG_ANA_GAIN_CODE_GLOBAL, 557 ctrl->val); 558 break; 559 case V4L2_CID_GAIN: 560 case V4L2_CID_RED_BALANCE: 561 case V4L2_CID_BLUE_BALANCE: 562 ret = ar0521_set_gains(sensor); 563 break; 564 case V4L2_CID_EXPOSURE: 565 ret = ar0521_write_reg(sensor, 566 AR0521_REG_COARSE_INTEGRATION_TIME, 567 ctrl->val); 568 break; 569 case V4L2_CID_TEST_PATTERN: 570 ret = ar0521_write_reg(sensor, AR0521_REG_TEST_PATTERN_MODE, 571 ctrl->val); 572 break; 573 default: 574 dev_err(&sensor->i2c_client->dev, 575 "Unsupported control %x\n", ctrl->id); 576 ret = -EINVAL; 577 break; 578 } 579 580 pm_runtime_put(&sensor->i2c_client->dev); 581 return ret; 582} 583 584static const struct v4l2_ctrl_ops ar0521_ctrl_ops = { 585 .s_ctrl = ar0521_s_ctrl, 586}; 587 588static const char * const test_pattern_menu[] = { 589 "Disabled", 590 "Solid color", 591 "Color bars", 592 "Faded color bars" 593}; 594 595static int ar0521_init_controls(struct ar0521_dev *sensor) 596{ 597 const struct v4l2_ctrl_ops *ops = &ar0521_ctrl_ops; 598 struct ar0521_ctrls *ctrls = &sensor->ctrls; 599 struct v4l2_ctrl_handler *hdl = &ctrls->handler; 600 int max_vblank, max_hblank, exposure_max; 601 struct v4l2_ctrl *link_freq; 602 int ret; 603 604 v4l2_ctrl_handler_init(hdl, 32); 605 606 /* We can use our own mutex for the ctrl lock */ 607 hdl->lock = &sensor->lock; 608 609 /* Analog gain */ 610 v4l2_ctrl_new_std(hdl, ops, V4L2_CID_ANALOGUE_GAIN, 611 AR0521_ANA_GAIN_MIN, AR0521_ANA_GAIN_MAX, 612 AR0521_ANA_GAIN_STEP, AR0521_ANA_GAIN_DEFAULT); 613 614 /* Manual gain */ 615 ctrls->gain = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_GAIN, 0, 511, 1, 0); 616 ctrls->red_balance = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_RED_BALANCE, 617 -512, 511, 1, 0); 618 ctrls->blue_balance = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_BLUE_BALANCE, 619 -512, 511, 1, 0); 620 v4l2_ctrl_cluster(3, &ctrls->gain); 621 622 /* Initialize blanking limits using the default 2592x1944 format. */ 623 max_hblank = AR0521_TOTAL_WIDTH_MAX - AR0521_WIDTH_MAX; 624 ctrls->hblank = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_HBLANK, 625 AR0521_WIDTH_BLANKING_MIN, 626 max_hblank, 1, 627 AR0521_WIDTH_BLANKING_MIN); 628 629 max_vblank = AR0521_TOTAL_HEIGHT_MAX - AR0521_HEIGHT_MAX; 630 ctrls->vblank = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_VBLANK, 631 AR0521_HEIGHT_BLANKING_MIN, 632 max_vblank, 2, 633 AR0521_HEIGHT_BLANKING_MIN); 634 v4l2_ctrl_cluster(2, &ctrls->hblank); 635 636 /* Read-only */ 637 ctrls->pixrate = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_PIXEL_RATE, 638 AR0521_PIXEL_CLOCK_MIN, 639 AR0521_PIXEL_CLOCK_MAX, 1, 640 AR0521_PIXEL_CLOCK_RATE); 641 642 /* Manual exposure time: max exposure time = visible + blank - 4 */ 643 exposure_max = AR0521_HEIGHT_MAX + AR0521_HEIGHT_BLANKING_MIN - 4; 644 ctrls->exposure = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_EXPOSURE, 0, 645 exposure_max, 1, 0x70); 646 647 link_freq = v4l2_ctrl_new_int_menu(hdl, ops, V4L2_CID_LINK_FREQ, 648 ARRAY_SIZE(ar0521_link_frequencies) - 1, 649 0, ar0521_link_frequencies); 650 if (link_freq) 651 link_freq->flags |= V4L2_CTRL_FLAG_READ_ONLY; 652 653 ctrls->test_pattern = v4l2_ctrl_new_std_menu_items(hdl, ops, 654 V4L2_CID_TEST_PATTERN, 655 ARRAY_SIZE(test_pattern_menu) - 1, 656 0, 0, test_pattern_menu); 657 658 if (hdl->error) { 659 ret = hdl->error; 660 goto free_ctrls; 661 } 662 663 sensor->sd.ctrl_handler = hdl; 664 return 0; 665 666free_ctrls: 667 v4l2_ctrl_handler_free(hdl); 668 return ret; 669} 670 671#define REGS_ENTRY(a) {(a), ARRAY_SIZE(a)} 672#define REGS(...) REGS_ENTRY(((const __be16[]){__VA_ARGS__})) 673 674static const struct initial_reg { 675 const __be16 *data; /* data[0] is register address */ 676 unsigned int count; 677} initial_regs[] = { 678 REGS(be(0x0112), be(0x0808)), /* 8-bit/8-bit mode */ 679 680 /* PEDESTAL+2 :+2 is a workaround for 10bit mode +0.5 rounding */ 681 REGS(be(0x301E), be(0x00AA)), 682 683 /* corrections_recommended_bayer */ 684 REGS(be(0x3042), 685 be(0x0004), /* 3042: RNC: enable b/w rnc mode */ 686 be(0x4580)), /* 3044: RNC: enable row noise correction */ 687 688 REGS(be(0x30D2), 689 be(0x0000), /* 30D2: CRM/CC: enable crm on Visible and CC rows */ 690 be(0x0000), /* 30D4: CC: CC enabled with 16 samples per column */ 691 /* 30D6: CC: bw mode enabled/12 bit data resolution/bw mode */ 692 be(0x2FFF)), 693 694 REGS(be(0x30DA), 695 be(0x0FFF), /* 30DA: CC: column correction clip level 2 is 0 */ 696 be(0x0FFF), /* 30DC: CC: column correction clip level 3 is 0 */ 697 be(0x0000)), /* 30DE: CC: Group FPN correction */ 698 699 /* RNC: rnc scaling factor = * 54 / 64 (32 / 38 * 64 = 53.9) */ 700 REGS(be(0x30EE), be(0x1136)), 701 REGS(be(0x30FA), be(0xFD00)), /* GPIO0 = flash, GPIO1 = shutter */ 702 REGS(be(0x3120), be(0x0005)), /* p1 dither enabled for 10bit mode */ 703 REGS(be(0x3172), be(0x0206)), /* txlo clk divider options */ 704 /* FDOC:fdoc settings with fdoc every frame turned of */ 705 REGS(be(0x3180), be(0x9434)), 706 707 REGS(be(0x31B0), 708 be(0x008B), /* 31B0: frame_preamble - FIXME check WRT lanes# */ 709 be(0x0050)), /* 31B2: line_preamble - FIXME check WRT lanes# */ 710 711 /* don't use continuous clock mode while shut down */ 712 REGS(be(0x31BC), be(0x068C)), 713 REGS(be(0x31E0), be(0x0781)), /* Fuse/2DDC: enable 2ddc */ 714 715 /* analog_setup_recommended_10bit */ 716 REGS(be(0x341A), be(0x4735)), /* Samp&Hold pulse in ADC */ 717 REGS(be(0x3420), be(0x4735)), /* Samp&Hold pulse in ADC */ 718 REGS(be(0x3426), be(0x8A1A)), /* ADC offset distribution pulse */ 719 REGS(be(0x342A), be(0x0018)), /* pulse_config */ 720 721 /* pixel_timing_recommended */ 722 REGS(be(0x3D00), 723 /* 3D00 */ be(0x043E), be(0x4760), be(0xFFFF), be(0xFFFF), 724 /* 3D08 */ be(0x8000), be(0x0510), be(0xAF08), be(0x0252), 725 /* 3D10 */ be(0x486F), be(0x5D5D), be(0x8056), be(0x8313), 726 /* 3D18 */ be(0x0087), be(0x6A48), be(0x6982), be(0x0280), 727 /* 3D20 */ be(0x8359), be(0x8D02), be(0x8020), be(0x4882), 728 /* 3D28 */ be(0x4269), be(0x6A95), be(0x5988), be(0x5A83), 729 /* 3D30 */ be(0x5885), be(0x6280), be(0x6289), be(0x6097), 730 /* 3D38 */ be(0x5782), be(0x605C), be(0xBF18), be(0x0961), 731 /* 3D40 */ be(0x5080), be(0x2090), be(0x4390), be(0x4382), 732 /* 3D48 */ be(0x5F8A), be(0x5D5D), be(0x9C63), be(0x8063), 733 /* 3D50 */ be(0xA960), be(0x9757), be(0x8260), be(0x5CFF), 734 /* 3D58 */ be(0xBF10), be(0x1681), be(0x0802), be(0x8000), 735 /* 3D60 */ be(0x141C), be(0x6000), be(0x6022), be(0x4D80), 736 /* 3D68 */ be(0x5C97), be(0x6A69), be(0xAC6F), be(0x4645), 737 /* 3D70 */ be(0x4400), be(0x0513), be(0x8069), be(0x6AC6), 738 /* 3D78 */ be(0x5F95), be(0x5F70), be(0x8040), be(0x4A81), 739 /* 3D80 */ be(0x0300), be(0xE703), be(0x0088), be(0x4A83), 740 /* 3D88 */ be(0x40FF), be(0xFFFF), be(0xFD70), be(0x8040), 741 /* 3D90 */ be(0x4A85), be(0x4FA8), be(0x4F8C), be(0x0070), 742 /* 3D98 */ be(0xBE47), be(0x8847), be(0xBC78), be(0x6B89), 743 /* 3DA0 */ be(0x6A80), be(0x6986), be(0x6B8E), be(0x6B80), 744 /* 3DA8 */ be(0x6980), be(0x6A88), be(0x7C9F), be(0x866B), 745 /* 3DB0 */ be(0x8765), be(0x46FF), be(0xE365), be(0xA679), 746 /* 3DB8 */ be(0x4A40), be(0x4580), be(0x44BC), be(0x7000), 747 /* 3DC0 */ be(0x8040), be(0x0802), be(0x10EF), be(0x0104), 748 /* 3DC8 */ be(0x3860), be(0x5D5D), be(0x5682), be(0x1300), 749 /* 3DD0 */ be(0x8648), be(0x8202), be(0x8082), be(0x598A), 750 /* 3DD8 */ be(0x0280), be(0x2048), be(0x3060), be(0x8042), 751 /* 3DE0 */ be(0x9259), be(0x865A), be(0x8258), be(0x8562), 752 /* 3DE8 */ be(0x8062), be(0x8560), be(0x9257), be(0x8221), 753 /* 3DF0 */ be(0x10FF), be(0xB757), be(0x9361), be(0x1019), 754 /* 3DF8 */ be(0x8020), be(0x9043), be(0x8E43), be(0x845F), 755 /* 3E00 */ be(0x835D), be(0x805D), be(0x8163), be(0x8063), 756 /* 3E08 */ be(0xA060), be(0x9157), be(0x8260), be(0x5CFF), 757 /* 3E10 */ be(0xFFFF), be(0xFFE5), be(0x1016), be(0x2048), 758 /* 3E18 */ be(0x0802), be(0x1C60), be(0x0014), be(0x0060), 759 /* 3E20 */ be(0x2205), be(0x8120), be(0x908F), be(0x6A80), 760 /* 3E28 */ be(0x6982), be(0x5F9F), be(0x6F46), be(0x4544), 761 /* 3E30 */ be(0x0005), be(0x8013), be(0x8069), be(0x6A80), 762 /* 3E38 */ be(0x7000), be(0x0000), be(0x0000), be(0x0000), 763 /* 3E40 */ be(0x0000), be(0x0000), be(0x0000), be(0x0000), 764 /* 3E48 */ be(0x0000), be(0x0000), be(0x0000), be(0x0000), 765 /* 3E50 */ be(0x0000), be(0x0000), be(0x0000), be(0x0000), 766 /* 3E58 */ be(0x0000), be(0x0000), be(0x0000), be(0x0000), 767 /* 3E60 */ be(0x0000), be(0x0000), be(0x0000), be(0x0000), 768 /* 3E68 */ be(0x0000), be(0x0000), be(0x0000), be(0x0000), 769 /* 3E70 */ be(0x0000), be(0x0000), be(0x0000), be(0x0000), 770 /* 3E78 */ be(0x0000), be(0x0000), be(0x0000), be(0x0000), 771 /* 3E80 */ be(0x0000), be(0x0000), be(0x0000), be(0x0000), 772 /* 3E88 */ be(0x0000), be(0x0000), be(0x0000), be(0x0000), 773 /* 3E90 */ be(0x0000), be(0x0000), be(0x0000), be(0x0000), 774 /* 3E98 */ be(0x0000), be(0x0000), be(0x0000), be(0x0000), 775 /* 3EA0 */ be(0x0000), be(0x0000), be(0x0000), be(0x0000), 776 /* 3EA8 */ be(0x0000), be(0x0000), be(0x0000), be(0x0000), 777 /* 3EB0 */ be(0x0000), be(0x0000), be(0x0000)), 778 779 REGS(be(0x3EB6), be(0x004C)), /* ECL */ 780 781 REGS(be(0x3EBA), 782 be(0xAAAD), /* 3EBA */ 783 be(0x0086)), /* 3EBC: Bias currents for FSC/ECL */ 784 785 REGS(be(0x3EC0), 786 be(0x1E00), /* 3EC0: SFbin/SH mode settings */ 787 be(0x100A), /* 3EC2: CLK divider for ramp for 10 bit 400MH */ 788 /* 3EC4: FSC clamps for HDR mode and adc comp power down co */ 789 be(0x3300), 790 be(0xEA44), /* 3EC6: VLN and clk gating controls */ 791 be(0x6F6F), /* 3EC8: Txl0 and Txlo1 settings for normal mode */ 792 be(0x2F4A), /* 3ECA: CDAC/Txlo2/RSTGHI/RSTGLO settings */ 793 be(0x0506), /* 3ECC: RSTDHI/RSTDLO/CDAC/TXHI settings */ 794 /* 3ECE: Ramp buffer settings and Booster enable (bits 0-5) */ 795 be(0x203B), 796 be(0x13F0), /* 3ED0: TXLO from atest/sf bin settings */ 797 be(0xA53D), /* 3ED2: Ramp offset */ 798 be(0x862F), /* 3ED4: TXLO open loop/row driver settings */ 799 be(0x4081), /* 3ED6: Txlatch fr cfpn rows/vln bias */ 800 be(0x8003), /* 3ED8: Ramp step setting for 10 bit 400 Mhz */ 801 be(0xA580), /* 3EDA: Ramp Offset */ 802 be(0xC000), /* 3EDC: over range for rst and under range for sig */ 803 be(0xC103)), /* 3EDE: over range for sig and col dec clk settings */ 804 805 /* corrections_recommended_bayer */ 806 REGS(be(0x3F00), 807 be(0x0017), /* 3F00: BM_T0 */ 808 be(0x02DD), /* 3F02: BM_T1 */ 809 /* 3F04: if Ana_gain less than 2, use noise_floor0, multiply */ 810 be(0x0020), 811 /* 3F06: if Ana_gain between 4 and 7, use noise_floor2 and */ 812 be(0x0040), 813 /* 3F08: if Ana_gain between 4 and 7, use noise_floor2 and */ 814 be(0x0070), 815 /* 3F0A: Define noise_floor0(low address) and noise_floor1 */ 816 be(0x0101), 817 be(0x0302)), /* 3F0C: Define noise_floor2 and noise_floor3 */ 818 819 REGS(be(0x3F10), 820 be(0x0505), /* 3F10: single k factor 0 */ 821 be(0x0505), /* 3F12: single k factor 1 */ 822 be(0x0505), /* 3F14: single k factor 2 */ 823 be(0x01FF), /* 3F16: cross factor 0 */ 824 be(0x01FF), /* 3F18: cross factor 1 */ 825 be(0x01FF), /* 3F1A: cross factor 2 */ 826 be(0x0022)), /* 3F1E */ 827 828 /* GTH_THRES_RTN: 4max,4min filtered out of every 46 samples and */ 829 REGS(be(0x3F2C), be(0x442E)), 830 831 REGS(be(0x3F3E), 832 be(0x0000), /* 3F3E: Switch ADC from 12 bit to 10 bit mode */ 833 be(0x1511), /* 3F40: couple k factor 0 */ 834 be(0x1511), /* 3F42: couple k factor 1 */ 835 be(0x0707)), /* 3F44: couple k factor 2 */ 836}; 837 838static void __ar0521_power_off(struct device *dev) 839{ 840 struct v4l2_subdev *sd = dev_get_drvdata(dev); 841 struct ar0521_dev *sensor = to_ar0521_dev(sd); 842 int i; 843 844 if (sensor->reset_gpio) 845 /* assert RESET signal */ 846 gpiod_set_value_cansleep(sensor->reset_gpio, 1); 847 848 for (i = ARRAY_SIZE(ar0521_supply_names) - 1; i >= 0; i--) { 849 if (sensor->supplies[i]) 850 regulator_disable(sensor->supplies[i]); 851 } 852} 853 854static int ar0521_power_off(struct device *dev) 855{ 856 struct v4l2_subdev *sd = dev_get_drvdata(dev); 857 struct ar0521_dev *sensor = to_ar0521_dev(sd); 858 859 clk_disable_unprepare(sensor->extclk); 860 __ar0521_power_off(dev); 861 862 return 0; 863} 864 865static int ar0521_power_on(struct device *dev) 866{ 867 struct v4l2_subdev *sd = dev_get_drvdata(dev); 868 struct ar0521_dev *sensor = to_ar0521_dev(sd); 869 unsigned int cnt; 870 int ret; 871 872 for (cnt = 0; cnt < ARRAY_SIZE(ar0521_supply_names); cnt++) 873 if (sensor->supplies[cnt]) { 874 ret = regulator_enable(sensor->supplies[cnt]); 875 if (ret < 0) 876 goto off; 877 878 usleep_range(1000, 1500); /* min 1 ms */ 879 } 880 881 ret = clk_prepare_enable(sensor->extclk); 882 if (ret < 0) { 883 v4l2_err(&sensor->sd, "error enabling sensor clock\n"); 884 goto off; 885 } 886 usleep_range(1000, 1500); /* min 1 ms */ 887 888 if (sensor->reset_gpio) 889 /* deassert RESET signal */ 890 gpiod_set_value_cansleep(sensor->reset_gpio, 0); 891 usleep_range(4500, 5000); /* min 45000 clocks */ 892 893 for (cnt = 0; cnt < ARRAY_SIZE(initial_regs); cnt++) { 894 ret = ar0521_write_regs(sensor, initial_regs[cnt].data, 895 initial_regs[cnt].count); 896 if (ret) 897 goto off; 898 } 899 900 ret = ar0521_write_reg(sensor, AR0521_REG_SERIAL_FORMAT, 901 AR0521_REG_SERIAL_FORMAT_MIPI | 902 sensor->lane_count); 903 if (ret) 904 goto off; 905 906 /* set MIPI test mode - disabled for now */ 907 ret = ar0521_write_reg(sensor, AR0521_REG_HISPI_TEST_MODE, 908 ((0x40 << sensor->lane_count) - 0x40) | 909 AR0521_REG_HISPI_TEST_MODE_LP11); 910 if (ret) 911 goto off; 912 913 ret = ar0521_write_reg(sensor, AR0521_REG_ROW_SPEED, 0x110 | 914 4 / sensor->lane_count); 915 if (ret) 916 goto off; 917 918 return 0; 919off: 920 clk_disable_unprepare(sensor->extclk); 921 __ar0521_power_off(dev); 922 return ret; 923} 924 925static int ar0521_enum_mbus_code(struct v4l2_subdev *sd, 926 struct v4l2_subdev_state *sd_state, 927 struct v4l2_subdev_mbus_code_enum *code) 928{ 929 struct ar0521_dev *sensor = to_ar0521_dev(sd); 930 931 if (code->index) 932 return -EINVAL; 933 934 code->code = sensor->fmt.code; 935 return 0; 936} 937 938static int ar0521_enum_frame_size(struct v4l2_subdev *sd, 939 struct v4l2_subdev_state *sd_state, 940 struct v4l2_subdev_frame_size_enum *fse) 941{ 942 if (fse->index) 943 return -EINVAL; 944 945 if (fse->code != MEDIA_BUS_FMT_SGRBG8_1X8) 946 return -EINVAL; 947 948 fse->min_width = AR0521_WIDTH_MIN; 949 fse->max_width = AR0521_WIDTH_MAX; 950 fse->min_height = AR0521_HEIGHT_MIN; 951 fse->max_height = AR0521_HEIGHT_MAX; 952 953 return 0; 954} 955 956static int ar0521_pre_streamon(struct v4l2_subdev *sd, u32 flags) 957{ 958 struct ar0521_dev *sensor = to_ar0521_dev(sd); 959 int ret; 960 961 if (!(flags & V4L2_SUBDEV_PRE_STREAMON_FL_MANUAL_LP)) 962 return -EACCES; 963 964 ret = pm_runtime_resume_and_get(&sensor->i2c_client->dev); 965 if (ret < 0) 966 return ret; 967 968 /* Set LP-11 on clock and data lanes */ 969 ret = ar0521_write_reg(sensor, AR0521_REG_HISPI_CONTROL_STATUS, 970 AR0521_REG_HISPI_CONTROL_STATUS_FRAMER_TEST_MODE_ENABLE); 971 if (ret) 972 goto err; 973 974 /* Start streaming LP-11 */ 975 ret = ar0521_write_reg(sensor, AR0521_REG_RESET, 976 AR0521_REG_RESET_DEFAULTS | 977 AR0521_REG_RESET_STREAM); 978 if (ret) 979 goto err; 980 return 0; 981 982err: 983 pm_runtime_put(&sensor->i2c_client->dev); 984 return ret; 985} 986 987static int ar0521_post_streamoff(struct v4l2_subdev *sd) 988{ 989 struct ar0521_dev *sensor = to_ar0521_dev(sd); 990 991 pm_runtime_put(&sensor->i2c_client->dev); 992 return 0; 993} 994 995static int ar0521_s_stream(struct v4l2_subdev *sd, int enable) 996{ 997 struct ar0521_dev *sensor = to_ar0521_dev(sd); 998 int ret; 999 1000 mutex_lock(&sensor->lock); 1001 ret = ar0521_set_stream(sensor, enable); 1002 mutex_unlock(&sensor->lock); 1003 1004 return ret; 1005} 1006 1007static const struct v4l2_subdev_core_ops ar0521_core_ops = { 1008 .log_status = v4l2_ctrl_subdev_log_status, 1009}; 1010 1011static const struct v4l2_subdev_video_ops ar0521_video_ops = { 1012 .s_stream = ar0521_s_stream, 1013 .pre_streamon = ar0521_pre_streamon, 1014 .post_streamoff = ar0521_post_streamoff, 1015}; 1016 1017static const struct v4l2_subdev_pad_ops ar0521_pad_ops = { 1018 .enum_mbus_code = ar0521_enum_mbus_code, 1019 .enum_frame_size = ar0521_enum_frame_size, 1020 .get_fmt = ar0521_get_fmt, 1021 .set_fmt = ar0521_set_fmt, 1022}; 1023 1024static const struct v4l2_subdev_ops ar0521_subdev_ops = { 1025 .core = &ar0521_core_ops, 1026 .video = &ar0521_video_ops, 1027 .pad = &ar0521_pad_ops, 1028}; 1029 1030static int ar0521_probe(struct i2c_client *client) 1031{ 1032 struct v4l2_fwnode_endpoint ep = { 1033 .bus_type = V4L2_MBUS_CSI2_DPHY 1034 }; 1035 struct device *dev = &client->dev; 1036 struct fwnode_handle *endpoint; 1037 struct ar0521_dev *sensor; 1038 unsigned int cnt; 1039 int ret; 1040 1041 sensor = devm_kzalloc(dev, sizeof(*sensor), GFP_KERNEL); 1042 if (!sensor) 1043 return -ENOMEM; 1044 1045 sensor->i2c_client = client; 1046 sensor->fmt.width = AR0521_WIDTH_MAX; 1047 sensor->fmt.height = AR0521_HEIGHT_MAX; 1048 1049 endpoint = fwnode_graph_get_endpoint_by_id(dev_fwnode(dev), 0, 0, 1050 FWNODE_GRAPH_ENDPOINT_NEXT); 1051 if (!endpoint) { 1052 dev_err(dev, "endpoint node not found\n"); 1053 return -EINVAL; 1054 } 1055 1056 ret = v4l2_fwnode_endpoint_parse(endpoint, &ep); 1057 fwnode_handle_put(endpoint); 1058 if (ret) { 1059 dev_err(dev, "could not parse endpoint\n"); 1060 return ret; 1061 } 1062 1063 if (ep.bus_type != V4L2_MBUS_CSI2_DPHY) { 1064 dev_err(dev, "invalid bus type, must be MIPI CSI2\n"); 1065 return -EINVAL; 1066 } 1067 1068 sensor->lane_count = ep.bus.mipi_csi2.num_data_lanes; 1069 switch (sensor->lane_count) { 1070 case 1: 1071 case 2: 1072 case 4: 1073 break; 1074 default: 1075 dev_err(dev, "invalid number of MIPI data lanes\n"); 1076 return -EINVAL; 1077 } 1078 1079 /* Get master clock (extclk) */ 1080 sensor->extclk = devm_v4l2_sensor_clk_get(dev, "extclk"); 1081 if (IS_ERR(sensor->extclk)) 1082 return dev_err_probe(dev, PTR_ERR(sensor->extclk), 1083 "failed to get extclk\n"); 1084 1085 sensor->extclk_freq = clk_get_rate(sensor->extclk); 1086 1087 if (sensor->extclk_freq < AR0521_EXTCLK_MIN || 1088 sensor->extclk_freq > AR0521_EXTCLK_MAX) { 1089 dev_err(dev, "extclk frequency out of range: %u Hz\n", 1090 sensor->extclk_freq); 1091 return -EINVAL; 1092 } 1093 1094 /* Request optional reset pin (usually active low) and assert it */ 1095 sensor->reset_gpio = devm_gpiod_get_optional(dev, "reset", 1096 GPIOD_OUT_HIGH); 1097 1098 v4l2_i2c_subdev_init(&sensor->sd, client, &ar0521_subdev_ops); 1099 1100 sensor->sd.flags = V4L2_SUBDEV_FL_HAS_DEVNODE; 1101 sensor->pad.flags = MEDIA_PAD_FL_SOURCE; 1102 sensor->sd.entity.function = MEDIA_ENT_F_CAM_SENSOR; 1103 ret = media_entity_pads_init(&sensor->sd.entity, 1, &sensor->pad); 1104 if (ret) 1105 return ret; 1106 1107 for (cnt = 0; cnt < ARRAY_SIZE(ar0521_supply_names); cnt++) { 1108 struct regulator *supply = devm_regulator_get(dev, 1109 ar0521_supply_names[cnt]); 1110 1111 if (IS_ERR(supply)) { 1112 dev_info(dev, "no %s regulator found: %pe\n", 1113 ar0521_supply_names[cnt], supply); 1114 return PTR_ERR(supply); 1115 } 1116 sensor->supplies[cnt] = supply; 1117 } 1118 1119 mutex_init(&sensor->lock); 1120 1121 ret = ar0521_init_controls(sensor); 1122 if (ret) 1123 goto entity_cleanup; 1124 1125 ar0521_adj_fmt(&sensor->fmt); 1126 1127 ret = v4l2_async_register_subdev(&sensor->sd); 1128 if (ret) 1129 goto free_ctrls; 1130 1131 /* Turn on the device and enable runtime PM */ 1132 ret = ar0521_power_on(&client->dev); 1133 if (ret) 1134 goto disable; 1135 pm_runtime_set_active(&client->dev); 1136 pm_runtime_enable(&client->dev); 1137 pm_runtime_idle(&client->dev); 1138 return 0; 1139 1140disable: 1141 v4l2_async_unregister_subdev(&sensor->sd); 1142 media_entity_cleanup(&sensor->sd.entity); 1143free_ctrls: 1144 v4l2_ctrl_handler_free(&sensor->ctrls.handler); 1145entity_cleanup: 1146 media_entity_cleanup(&sensor->sd.entity); 1147 mutex_destroy(&sensor->lock); 1148 return ret; 1149} 1150 1151static void ar0521_remove(struct i2c_client *client) 1152{ 1153 struct v4l2_subdev *sd = i2c_get_clientdata(client); 1154 struct ar0521_dev *sensor = to_ar0521_dev(sd); 1155 1156 v4l2_async_unregister_subdev(&sensor->sd); 1157 media_entity_cleanup(&sensor->sd.entity); 1158 v4l2_ctrl_handler_free(&sensor->ctrls.handler); 1159 pm_runtime_disable(&client->dev); 1160 if (!pm_runtime_status_suspended(&client->dev)) 1161 ar0521_power_off(&client->dev); 1162 pm_runtime_set_suspended(&client->dev); 1163 mutex_destroy(&sensor->lock); 1164} 1165 1166static const struct dev_pm_ops ar0521_pm_ops = { 1167 SET_RUNTIME_PM_OPS(ar0521_power_off, ar0521_power_on, NULL) 1168}; 1169static const struct of_device_id ar0521_dt_ids[] = { 1170 {.compatible = "onnn,ar0521"}, 1171 {} 1172}; 1173MODULE_DEVICE_TABLE(of, ar0521_dt_ids); 1174 1175static struct i2c_driver ar0521_i2c_driver = { 1176 .driver = { 1177 .name = "ar0521", 1178 .pm = &ar0521_pm_ops, 1179 .of_match_table = ar0521_dt_ids, 1180 }, 1181 .probe = ar0521_probe, 1182 .remove = ar0521_remove, 1183}; 1184 1185module_i2c_driver(ar0521_i2c_driver); 1186 1187MODULE_DESCRIPTION("AR0521 MIPI Camera subdev driver"); 1188MODULE_AUTHOR("Krzysztof Hałasa <khalasa@piap.pl>"); 1189MODULE_LICENSE("GPL");
~/
Read-only file preview.