Kconfig

   1# SPDX-License-Identifier: GPL-2.0-only
   2config LEDS_GPIO_REGISTER
   3	bool
   4	help
   5	  This option provides the function gpio_led_register_device.
   6	  As this function is used by arch code it must not be compiled as a
   7	  module.
   8
   9# This library does not depend on NEW_LEDS and must be independent so it can be
  10# selected from other subsystems (specifically backlight).
  11config LEDS_EXPRESSWIRE
  12	bool
  13	depends on GPIOLIB
  14
  15menuconfig NEW_LEDS
  16	bool "LED Support"
  17	help
  18	  Say Y to enable Linux LED support.  This allows control of supported
  19	  LEDs from both userspace and optionally, by kernel events (triggers).
  20
  21if NEW_LEDS
  22
  23config LEDS_CLASS
  24	tristate "LED Class Support"
  25	help
  26	  This option enables the LED sysfs class in /sys/class/leds.  You'll
  27	  need this to do anything useful with LEDs.  If unsure, say Y.
  28
  29config LEDS_CLASS_FLASH
  30	tristate "LED Flash Class Support"
  31	depends on LEDS_CLASS
  32	help
  33	  This option enables the flash LED sysfs class in /sys/class/leds.
  34	  It wraps LED Class and adds flash LEDs specific sysfs attributes
  35	  and kernel internal API to it. You'll need this to provide support
  36	  for the flash related features of a LED device. It can be built
  37	  as a module.
  38
  39config LEDS_CLASS_MULTICOLOR
  40	tristate "LED Multicolor Class Support"
  41	depends on LEDS_CLASS
  42	help
  43	  This option enables the multicolor LED sysfs class in /sys/class/leds.
  44	  It wraps LED class and adds multicolor LED specific sysfs attributes
  45	  and kernel internal API to it. You'll need this to provide support
  46	  for multicolor LEDs that are grouped together. This class is not
  47	  intended for single color LEDs. It can be built as a module.
  48
  49config LEDS_BRIGHTNESS_HW_CHANGED
  50	bool "LED Class brightness_hw_changed attribute support"
  51	depends on LEDS_CLASS
  52	help
  53	  This option enables support for the brightness_hw_changed attribute
  54	  for LED sysfs class devices under /sys/class/leds.
  55
  56	  See Documentation/ABI/testing/sysfs-class-led for details.
  57
  58config LEDS_KUNIT_TEST
  59	tristate "KUnit tests for LEDs"
  60	depends on KUNIT && LEDS_CLASS
  61	default KUNIT_ALL_TESTS
  62	help
  63	  Say Y here to enable KUnit testing for the LEDs framework.
  64
  65comment "LED drivers"
  66
  67config LEDS_88PM860X
  68	tristate "LED Support for Marvell 88PM860x PMIC"
  69	depends on LEDS_CLASS
  70	depends on MFD_88PM860X
  71	help
  72	  This option enables support for on-chip LED drivers found on Marvell
  73	  Semiconductor 88PM8606 PMIC.
  74
  75config LEDS_AN30259A
  76	tristate "LED support for Panasonic AN30259A"
  77	depends on LEDS_CLASS && I2C && OF
  78	help
  79	  This option enables support for the AN30259A 3-channel
  80	  LED driver.
  81
  82	  To compile this driver as a module, choose M here: the module
  83	  will be called leds-an30259a.
  84
  85config LEDS_APU
  86	tristate "Front panel LED support for PC Engines APU/APU2/APU3 boards"
  87	depends on LEDS_CLASS
  88	depends on X86 && DMI
  89	help
  90	  This driver makes the PC Engines APU1 front panel LEDs
  91	  accessible from userspace programs through the LED subsystem.
  92
  93	  If you're looking for APU2/3, use the pcengines-apu2 driver.
  94	  (symbol CONFIG_PCENGINES_APU2)
  95
  96	  To compile this driver as a module, choose M here: the
  97	  module will be called leds-apu.
  98
  99config LEDS_ARIEL
 100	tristate "Dell Wyse 3020 status LED support"
 101	depends on LEDS_CLASS
 102	depends on (MACH_MMP3_DT && MFD_ENE_KB3930) || COMPILE_TEST
 103	help
 104	  This driver adds support for controlling the front panel status
 105	  LEDs on Dell Wyse 3020 (Ariel) board via the KB3930 Embedded
 106	  Controller.
 107
 108	  Say Y to if your machine is a Dell Wyse 3020 thin client.
 109
 110config LEDS_AW200XX
 111	tristate "LED support for Awinic AW20036/AW20054/AW20072/AW20108"
 112	depends on LEDS_CLASS
 113	depends on I2C
 114	help
 115	  This option enables support for the Awinic AW200XX LED controllers.
 116	  It is a matrix LED driver programmed via an I2C interface. Devices have
 117	  a set of individually controlled LEDs and support 3 pattern controllers
 118	  for auto breathing or group dimming control. Supported devices:
 119	    - AW20036 (3x12) 36 LEDs
 120	    - AW20054 (6x9)  54 LEDs
 121	    - AW20072 (6x12) 72 LEDs
 122	    - AW20108 (9x12) 108 LEDs
 123
 124	  To compile this driver as a module, choose M here: the module
 125	  will be called leds-aw200xx.
 126
 127config LEDS_AW2013
 128	tristate "LED support for Awinic AW2013"
 129	depends on LEDS_CLASS && I2C && OF
 130	select REGMAP_I2C
 131	help
 132	  This option enables support for the AW2013 3-channel
 133	  LED driver.
 134
 135	  To compile this driver as a module, choose M here: the module
 136	  will be called leds-aw2013.
 137
 138config LEDS_BCM6328
 139	tristate "LED Support for Broadcom BCM6328"
 140	depends on LEDS_CLASS
 141	depends on HAS_IOMEM
 142	depends on OF
 143	help
 144	  This option enables support for LEDs connected to the BCM6328
 145	  LED HW controller accessed via MMIO registers.
 146
 147config LEDS_BCM6358
 148	tristate "LED Support for Broadcom BCM6358"
 149	depends on LEDS_CLASS
 150	depends on HAS_IOMEM
 151	depends on OF
 152	help
 153	  This option enables support for LEDs connected to the BCM6358
 154	  LED HW controller accessed via MMIO registers.
 155
 156config LEDS_CHT_WCOVE
 157	tristate "LED support for Intel Cherry Trail Whiskey Cove PMIC"
 158	depends on LEDS_CLASS
 159	depends on INTEL_SOC_PMIC_CHTWC
 160	help
 161	  This option enables support for charger and general purpose LEDs
 162	  connected to the Intel Cherrytrail Whiskey Cove PMIC.
 163
 164	  To compile this driver as a module, choose M here: the module
 165	  will be called leds-cht-wcove.
 166
 167config LEDS_CPCAP
 168	tristate "LED Support for Motorola CPCAP"
 169	depends on LEDS_CLASS
 170	depends on MFD_CPCAP
 171	depends on OF
 172	help
 173	  This option enables support for LEDs offered by Motorola's
 174	  CPCAP PMIC.
 175
 176config LEDS_CR0014114
 177	tristate "LED Support for Crane CR0014114"
 178	depends on LEDS_CLASS
 179	depends on SPI
 180	depends on OF
 181	help
 182	  This option enables support for CR0014114 LED Board which
 183	  is widely used in vending machines produced by
 184	  Crane Merchandising Systems.
 185
 186	  To compile this driver as a module, choose M here: the module
 187	  will be called leds-cr0014114.
 188
 189config LEDS_CROS_EC
 190	tristate "LED Support for ChromeOS EC"
 191	depends on MFD_CROS_EC_DEV
 192	depends on LEDS_CLASS_MULTICOLOR
 193	select LEDS_TRIGGERS
 194	default MFD_CROS_EC_DEV
 195	help
 196	  This option enables support for LEDs managed by ChromeOS ECs.
 197	  All LEDs exposed by the EC are supported in multicolor mode.
 198	  A hardware trigger to switch back to the automatic behaviour is
 199	  provided.
 200
 201	  To compile this driver as a module, choose M here: the module
 202	  will be called leds-cros_ec.
 203
 204config LEDS_EL15203000
 205	tristate "LED Support for Crane EL15203000"
 206	depends on LEDS_CLASS
 207	depends on SPI
 208	depends on OF
 209	help
 210	  This option enables support for EL15203000 LED Board
 211	  (aka RED LED board) which is widely used in coffee vending
 212	  machines produced by Crane Merchandising Systems.
 213
 214	  To compile this driver as a module, choose M here: the module
 215	  will be called leds-el15203000.
 216
 217config LEDS_TURRIS_OMNIA
 218	tristate "LED support for CZ.NIC's Turris Omnia"
 219	depends on LEDS_CLASS_MULTICOLOR
 220	depends on I2C
 221	depends on MACH_ARMADA_38X || COMPILE_TEST
 222	depends on OF
 223	depends on TURRIS_OMNIA_MCU
 224	depends on TURRIS_OMNIA_MCU_GPIO
 225	select LEDS_TRIGGERS
 226	help
 227	  This option enables basic support for the LEDs found on the front
 228	  side of CZ.NIC's Turris Omnia router. There are 12 RGB LEDs on the
 229	  front panel.
 230
 231config LEDS_LM3530
 232	tristate "LCD Backlight driver for LM3530"
 233	depends on LEDS_CLASS
 234	depends on I2C
 235	help
 236	  This option enables support for the LCD backlight using
 237	  LM3530 ambient light sensor chip. This ALS chip can be
 238	  controlled manually or using PWM input or using ambient
 239	  light automatically.
 240
 241config LEDS_LM3532
 242	tristate "LCD Backlight driver for LM3532"
 243	select REGMAP_I2C
 244	depends on LEDS_CLASS
 245	depends on I2C
 246	help
 247	  This option enables support for the LCD backlight using
 248	  LM3532 ambient light sensor chip. This ALS chip can be
 249	  controlled manually or using PWM input or using ambient
 250	  light automatically.
 251
 252config LEDS_LM3533
 253	tristate "LED support for LM3533"
 254	depends on LEDS_CLASS
 255	depends on MFD_LM3533
 256	help
 257	  This option enables support for the LEDs on National Semiconductor /
 258	  TI LM3533 Lighting Power chips.
 259
 260	  The LEDs can be controlled directly, through PWM input, or by the
 261	  ambient-light-sensor interface. The chip supports
 262	  hardware-accelerated blinking with maximum on and off periods of 9.8
 263	  and 77 seconds respectively.
 264
 265config LEDS_LM3642
 266	tristate "LED support for LM3642 Chip"
 267	depends on LEDS_CLASS && I2C
 268	select REGMAP_I2C
 269	help
 270	  This option enables support for LEDs connected to LM3642.
 271	  The LM3642 is a 4MHz fixed-frequency synchronous boost
 272	  converter plus 1.5A constant current driver for a high-current
 273	  white LED.
 274
 275config LEDS_LM3692X
 276	tristate "LED support for LM3692x Chips"
 277	depends on LEDS_CLASS && I2C && OF
 278	select REGMAP_I2C
 279	help
 280	  This option enables support for the TI LM3692x family
 281	  of white LED string drivers used for backlighting.
 282
 283config LEDS_LOCOMO
 284	tristate "LED Support for Locomo device"
 285	depends on LEDS_CLASS
 286	depends on SHARP_LOCOMO
 287	help
 288	  This option enables support for the LEDs on Sharp Locomo.
 289	  Zaurus models SL-5500 and SL-5600.
 290
 291config LEDS_MIKROTIK_RB532
 292	tristate "LED Support for Mikrotik Routerboard 532"
 293	depends on LEDS_CLASS
 294	depends on MIKROTIK_RB532
 295	help
 296	  This option enables support for the so called "User LED" of
 297	  Mikrotik's Routerboard 532.
 298
 299config LEDS_MT6323
 300	tristate "LED Support for Mediatek MT6323 PMIC"
 301	depends on LEDS_CLASS
 302	depends on MFD_MT6397
 303	help
 304	  This option enables support for on-chip LED drivers found on
 305	  Mediatek MT6323 PMIC.
 306
 307config LEDS_NET48XX
 308	tristate "LED Support for Soekris net48xx series Error LED"
 309	depends on LEDS_CLASS
 310	depends on SCx200_GPIO
 311	help
 312	  This option enables support for the Soekris net4801 and net4826 error
 313	  LED.
 314
 315config LEDS_WRAP
 316	tristate "LED Support for the WRAP series LEDs"
 317	depends on LEDS_CLASS
 318	depends on SCx200_GPIO
 319	help
 320	  This option enables support for the PCEngines WRAP programmable LEDs.
 321
 322config LEDS_COBALT_QUBE
 323	tristate "LED Support for the Cobalt Qube series front LED"
 324	depends on LEDS_CLASS
 325	depends on MIPS_COBALT || COMPILE_TEST
 326	help
 327	  This option enables support for the front LED on Cobalt Qube series
 328
 329config LEDS_COBALT_RAQ
 330	bool "LED Support for the Cobalt Raq series"
 331	depends on LEDS_CLASS=y && (MIPS_COBALT || COMPILE_TEST)
 332	select LEDS_TRIGGERS
 333	help
 334	  This option enables support for the Cobalt Raq series LEDs.
 335
 336config LEDS_SUN50I_A100
 337	tristate "LED support for Allwinner A100 RGB LED controller"
 338	depends on LEDS_CLASS_MULTICOLOR
 339	depends on ARCH_SUNXI || COMPILE_TEST
 340	help
 341	  This option enables support for the RGB LED controller found
 342	  in some Allwinner sunxi SoCs, including A100, R329, and D1.
 343	  It uses a one-wire interface to control up to 1024 LEDs.
 344
 345config LEDS_SUNFIRE
 346	tristate "LED support for SunFire servers."
 347	depends on LEDS_CLASS
 348	depends on SPARC64
 349	select LEDS_TRIGGERS
 350	help
 351	  This option enables support for the Left, Middle, and Right
 352	  LEDs on the I/O and CPU boards of SunFire UltraSPARC servers.
 353
 354config LEDS_IPAQ_MICRO
 355	tristate "LED Support for the Compaq iPAQ h3xxx"
 356	depends on LEDS_CLASS
 357	depends on MFD_IPAQ_MICRO
 358	help
 359	  Choose this option if you want to use the notification LED on
 360	  Compaq/HP iPAQ h3100 and h3600.
 361
 362config LEDS_HP6XX
 363	tristate "LED Support for the HP Jornada 6xx"
 364	depends on LEDS_CLASS
 365	depends on SH_HP6XX
 366	help
 367	  This option enables LED support for the handheld
 368	  HP Jornada 620/660/680/690.
 369
 370config LEDS_PCA9532
 371	tristate "LED driver for PCA9532 dimmer"
 372	depends on LEDS_CLASS
 373	depends on I2C && INPUT
 374	help
 375	  This option enables support for NXP pca9532
 376	  LED controller. It is generally only useful
 377	  as a platform driver
 378
 379config LEDS_PCA9532_GPIO
 380	bool "Enable GPIO support for PCA9532"
 381	depends on LEDS_PCA9532
 382	depends on GPIOLIB
 383	help
 384	  Allow unused pins on PCA9532 to be used as gpio.
 385
 386	  To use a pin as gpio pca9532_type in pca9532_platform data needs to
 387	  set to PCA9532_TYPE_GPIO.
 388
 389config LEDS_GPIO
 390	tristate "LED Support for GPIO connected LEDs"
 391	depends on LEDS_CLASS
 392	depends on GPIOLIB || COMPILE_TEST
 393	help
 394	  This option enables support for the LEDs connected to GPIO
 395	  outputs. To be useful the particular board must have LEDs
 396	  and they must be connected to the GPIO lines.  The LEDs must be
 397	  defined as platform devices and/or OpenFirmware platform devices.
 398	  The code to use these bindings can be selected below.
 399
 400config LEDS_LP3944
 401	tristate "LED Support for N.S. LP3944 (Fun Light) I2C chip"
 402	depends on LEDS_CLASS
 403	depends on I2C
 404	help
 405	  This option enables support for LEDs connected to the National
 406	  Semiconductor LP3944 Lighting Management Unit (LMU) also known as
 407	  Fun Light Chip.
 408
 409	  To compile this driver as a module, choose M here: the
 410	  module will be called leds-lp3944.
 411
 412config LEDS_LP3952
 413	tristate "LED Support for TI LP3952 2 channel LED driver"
 414	depends on LEDS_CLASS
 415	depends on I2C
 416	depends on GPIOLIB
 417	select REGMAP_I2C
 418	help
 419	  This option enables support for LEDs connected to the Texas
 420	  Instruments LP3952 LED driver.
 421
 422	  To compile this driver as a module, choose M here: the
 423	  module will be called leds-lp3952.
 424
 425config LEDS_LP50XX
 426	tristate "LED Support for TI LP5036/30/24/18/12/09 LED driver chip"
 427	depends on LEDS_CLASS && REGMAP_I2C
 428	depends on LEDS_CLASS_MULTICOLOR
 429	help
 430	  If you say yes here you get support for the Texas Instruments
 431	  LP5036, LP5030, LP5024, LP5018, LP5012 and LP5009 LED driver.
 432
 433	  To compile this driver as a module, choose M here: the
 434	  module will be called leds-lp50xx.
 435
 436config LEDS_LP55XX_COMMON
 437	tristate "Common Driver for TI/National LP5521/5523/55231/5562/5569/8501"
 438	depends on LEDS_CLASS
 439	depends on LEDS_CLASS_MULTICOLOR
 440	depends on OF
 441	depends on I2C
 442	imply FW_LOADER
 443	imply FW_LOADER_USER_HELPER
 444	help
 445	  This option supports common operations for LP5521/5523/55231/5562/5569/
 446	  8501 devices.
 447
 448config LEDS_LP5521
 449	tristate "LED Support for N.S. LP5521 LED driver chip"
 450	depends on LEDS_CLASS && I2C
 451	depends on LEDS_LP55XX_COMMON
 452	help
 453	  If you say yes here you get support for the National Semiconductor
 454	  LP5521 LED driver. It is 3 channel chip with programmable engines.
 455	  Driver provides direct control via LED class and interface for
 456	  programming the engines.
 457
 458config LEDS_LP5523
 459	tristate "LED Support for TI/National LP5523/55231 LED driver chip"
 460	depends on LEDS_CLASS && I2C
 461	depends on LEDS_LP55XX_COMMON
 462	help
 463	  If you say yes here you get support for TI/National Semiconductor
 464	  LP5523/55231 LED driver.
 465	  It is 9 channel chip with programmable engines.
 466	  Driver provides direct control via LED class and interface for
 467	  programming the engines.
 468
 469config LEDS_LP5562
 470	tristate "LED Support for TI LP5562 LED driver chip"
 471	depends on LEDS_CLASS && I2C
 472	depends on LEDS_LP55XX_COMMON
 473	help
 474	  If you say yes here you get support for TI LP5562 LED driver.
 475	  It is 4 channels chip with programmable engines.
 476	  Driver provides direct control via LED class and interface for
 477	  programming the engines.
 478
 479config LEDS_LP5569
 480	tristate "LED Support for TI LP5569 LED driver chip"
 481	depends on LEDS_CLASS && I2C
 482	depends on LEDS_LP55XX_COMMON
 483	help
 484	  If you say yes here you get support for TI LP5569 LED driver.
 485	  It is 9 channels chip with programmable engines.
 486	  Driver provides direct control via LED class and interface for
 487	  programming the engines.
 488
 489config LEDS_LP8501
 490	tristate "LED Support for TI LP8501 LED driver chip"
 491	depends on LEDS_CLASS && I2C
 492	depends on LEDS_LP55XX_COMMON
 493	help
 494	  If you say yes here you get support for TI LP8501 LED driver.
 495	  It is 9 channel chip with programmable engines.
 496	  Driver provides direct control via LED class and interface for
 497	  programming the engines.
 498	  It is similar as LP5523, but output power selection is available.
 499	  And register layout and engine program schemes are different.
 500
 501config LEDS_LP8788
 502	tristate "LED support for the TI LP8788 PMIC"
 503	depends on LEDS_CLASS
 504	depends on MFD_LP8788
 505	help
 506	  This option enables support for the Keyboard LEDs on the LP8788 PMIC.
 507
 508config LEDS_LP8860
 509	tristate "LED support for the TI LP8860 4 channel LED driver"
 510	depends on LEDS_CLASS && I2C && OF
 511	select REGMAP_I2C
 512	help
 513	  If you say yes here you get support for the TI LP8860 4 channel
 514	  LED driver.
 515	  This option enables support for the display cluster LEDs
 516	  on the LP8860 4 channel LED driver using the I2C communication
 517	  bus.
 518
 519config LEDS_LP8864
 520	tristate "LED support for the TI LP8864/LP8866 4/6 channel LED drivers"
 521	depends on LEDS_CLASS && I2C && OF
 522	select REGMAP_I2C
 523	help
 524	  If you say yes here you get support for the TI LP8864-Q1,
 525	  LP8864S-Q1, LP8866-Q1, LP8866S-Q1 4/6 channel LED backlight
 526	  drivers with I2C interface.
 527
 528	  To compile this driver as a module, choose M here: the
 529	  module will be called leds-lp8864.
 530
 531config LEDS_CLEVO_MAIL
 532	tristate "Mail LED on Clevo notebook"
 533	depends on LEDS_CLASS && BROKEN
 534	depends on X86 && SERIO_I8042 && DMI
 535	help
 536	  This driver makes the mail LED accessible from userspace
 537	  programs through the LEDs subsystem. This LED has three
 538	  known modes: off, blink at 0.5Hz and blink at 1Hz.
 539
 540	  The driver supports two kinds of interface: using ledtrig-timer
 541	  or through /sys/class/leds/clevo::mail/brightness. As this LED
 542	  cannot change its brightness it blinks instead. The brightness
 543	  value 0 means off, 1..127 means blink at 0.5Hz and 128..255 means
 544	  blink at 1Hz.
 545
 546	  This module can drive the mail LED for the following notebooks:
 547
 548	        Clevo D400P
 549	        Clevo D410J
 550	        Clevo D410V
 551	        Clevo D400V/D470V (not tested, but might work)
 552	        Clevo M540N
 553	        Clevo M5x0N (not tested, but might work)
 554	        Positivo Mobile (Clevo M5x0V)
 555
 556	  If your model is not listed here you can try the "nodetect"
 557	  module parameter.
 558
 559	  To compile this driver as a module, choose M here: the
 560	  module will be called leds-clevo-mail.
 561
 562config LEDS_PCA955X
 563	tristate "LED Support for PCA955x I2C chips"
 564	depends on LEDS_CLASS
 565	depends on I2C
 566	help
 567	  This option enables support for LEDs connected to PCA955x
 568	  LED driver chips accessed via the I2C bus.  Supported
 569	  devices include PCA9550, PCA9551, PCA9552, and PCA9553.
 570
 571config LEDS_PCA955X_GPIO
 572	bool "Enable GPIO support for PCA955X"
 573	depends on LEDS_PCA955X
 574	depends on GPIOLIB
 575	help
 576	  Allow unused pins on PCA955X to be used as gpio.
 577
 578	  To use a pin as gpio the pin type should be set to
 579	  PCA955X_TYPE_GPIO in the device tree.
 580
 581
 582config LEDS_PCA963X
 583	tristate "LED support for PCA963x I2C chip"
 584	depends on LEDS_CLASS
 585	depends on I2C
 586	help
 587	  This option enables support for LEDs connected to the PCA963x
 588	  LED driver chip accessed via the I2C bus. Supported
 589	  devices include PCA9633 and PCA9634
 590
 591config LEDS_PCA995X
 592	tristate "LED Support for PCA995x I2C chips"
 593	depends on LEDS_CLASS
 594	depends on I2C
 595	help
 596	  This option enables support for LEDs connected to PCA995x
 597	  LED driver chips accessed via the I2C bus. Supported
 598	  devices include PCA9955BTW, PCA9952TW and PCA9955TW.
 599
 600config LEDS_QNAP_MCU
 601	tristate "LED Support for QNAP MCU controllers"
 602	depends on LEDS_CLASS
 603	depends on MFD_QNAP_MCU
 604	help
 605	  This option enables support for LEDs available on embedded
 606	  controllers used in QNAP NAS devices.
 607
 608	  This driver can also be built as a module. If so, the module
 609	  will be called qnap-mcu-leds.
 610
 611config LEDS_WM831X_STATUS
 612	tristate "LED support for status LEDs on WM831x PMICs"
 613	depends on LEDS_CLASS
 614	depends on MFD_WM831X
 615	help
 616	  This option enables support for the status LEDs of the WM831x
 617	  series of PMICs.
 618
 619config LEDS_WM8350
 620	tristate "LED Support for WM8350 AudioPlus PMIC"
 621	depends on LEDS_CLASS
 622	depends on MFD_WM8350
 623	help
 624	  This option enables support for LEDs driven by the Wolfson
 625	  Microelectronics WM8350 AudioPlus PMIC.
 626
 627config LEDS_DA903X
 628	tristate "LED Support for DA9030/DA9034 PMIC"
 629	depends on LEDS_CLASS
 630	depends on PMIC_DA903X
 631	help
 632	  This option enables support for on-chip LED drivers found
 633	  on Dialog Semiconductor DA9030/DA9034 PMICs.
 634
 635config LEDS_DA9052
 636	tristate "Dialog DA9052/DA9053 LEDS"
 637	depends on LEDS_CLASS
 638	depends on PMIC_DA9052
 639	help
 640	  This option enables support for on-chip LED drivers found
 641	  on Dialog Semiconductor DA9052-BC and DA9053-AA/Bx PMICs.
 642
 643config LEDS_DAC124S085
 644	tristate "LED Support for DAC124S085 SPI DAC"
 645	depends on LEDS_CLASS
 646	depends on SPI
 647	help
 648	  This option enables support for DAC124S085 SPI DAC from NatSemi,
 649	  which can be used to control up to four LEDs.
 650
 651config LEDS_PWM
 652	tristate "PWM driven LED Support"
 653	depends on LEDS_CLASS
 654	depends on PWM
 655	help
 656	  This option enables support for pwm driven LEDs
 657
 658config LEDS_REGULATOR
 659	tristate "REGULATOR driven LED support"
 660	depends on LEDS_CLASS
 661	depends on REGULATOR
 662	help
 663	  This option enables support for regulator driven LEDs.
 664
 665config LEDS_BD2606MVV
 666	tristate "LED driver for BD2606MVV"
 667	depends on LEDS_CLASS
 668	depends on I2C
 669	select REGMAP_I2C
 670	help
 671	  This option enables support for BD2606MVV LED driver chips
 672	  accessed via the I2C bus. It supports setting brightness, with
 673	  the limitation that there are groups of two channels sharing
 674	  a brightness setting, but not the on/off setting.
 675
 676	  To compile this driver as a module, choose M here: the module will
 677	  be called leds-bd2606mvv.
 678
 679config LEDS_BD2802
 680	tristate "LED driver for BD2802 RGB LED"
 681	depends on LEDS_CLASS
 682	depends on I2C
 683	help
 684	  This option enables support for BD2802GU RGB LED driver chips
 685	  accessed via the I2C bus.
 686
 687config LEDS_INTEL_SS4200
 688	tristate "LED driver for Intel NAS SS4200 series"
 689	depends on LEDS_CLASS
 690	depends on PCI && DMI
 691	depends on X86
 692	help
 693	  This option enables support for the Intel SS4200 series of
 694	  Network Attached Storage servers. You may control the hard
 695	  drive or power LEDs on the front panel. Using this driver
 696	  can stop the front LED from blinking after startup.
 697
 698config LEDS_LT3593
 699	tristate "LED driver for LT3593 controllers"
 700	depends on LEDS_CLASS
 701	depends on GPIOLIB || COMPILE_TEST
 702	help
 703	  This option enables support for LEDs driven by a Linear Technology
 704	  LT3593 controller. This controller uses a special one-wire pulse
 705	  coding protocol to set the brightness.
 706
 707config LEDS_ADP5520
 708	tristate "LED Support for ADP5520/ADP5501 PMIC"
 709	depends on LEDS_CLASS
 710	depends on PMIC_ADP5520
 711	help
 712	  This option enables support for on-chip LED drivers found
 713	  on Analog Devices ADP5520/ADP5501 PMICs.
 714
 715	  To compile this driver as a module, choose M here: the module will
 716	  be called leds-adp5520.
 717
 718config LEDS_MAX5970
 719	tristate "LED Support for Maxim 5970"
 720	depends on LEDS_CLASS
 721	depends on MFD_MAX5970
 722	help
 723	  This option enables support for the Maxim MAX5970 & MAX5978 smart
 724	  switch indication LEDs via the I2C bus.
 725
 726	  To compile this driver as a module, choose M here: the module will
 727	  be called leds-max5970.
 728
 729config LEDS_MC13783
 730	tristate "LED Support for MC13XXX PMIC"
 731	depends on LEDS_CLASS
 732	depends on MFD_MC13XXX
 733	help
 734	  This option enables support for on-chip LED drivers found
 735	  on Freescale Semiconductor MC13783/MC13892/MC34708 PMIC.
 736
 737config LEDS_NS2
 738	tristate "LED support for Network Space v2 GPIO LEDs"
 739	depends on LEDS_CLASS
 740	depends on MACH_KIRKWOOD || MACH_ARMADA_370 || COMPILE_TEST
 741	default y if MACH_KIRKWOOD || MACH_ARMADA_370
 742	help
 743	  This option enables support for the dual-GPIO LEDs found on the
 744	  following LaCie/Seagate boards:
 745
 746		Network Space v2 (and parents: Max, Mini)
 747		Internet Space v2
 748		d2 Network v2
 749		n090401 (Seagate NAS 4-Bay)
 750
 751config LEDS_NETXBIG
 752	tristate "LED support for Big Network series LEDs"
 753	depends on LEDS_CLASS
 754	depends on MACH_KIRKWOOD || COMPILE_TEST
 755	depends on OF_GPIO
 756	default MACH_KIRKWOOD
 757	help
 758	  This option enables support for LEDs found on the LaCie 2Big
 759	  and 5Big Network v2 boards. The LEDs are wired to a CPLD and are
 760	  controlled through a GPIO extension bus.
 761
 762config LEDS_TCA6507
 763	tristate "LED Support for TCA6507 I2C chip"
 764	depends on LEDS_CLASS && I2C
 765	help
 766	  This option enables support for LEDs connected to TC6507
 767	  LED driver chips accessed via the I2C bus.
 768	  Driver support brightness control and hardware-assisted blinking.
 769
 770config LEDS_TLC591XX
 771	tristate "LED driver for TLC59108 and TLC59116 controllers"
 772	depends on LEDS_CLASS && I2C
 773	select REGMAP_I2C
 774	help
 775	  This option enables support for Texas Instruments TLC59108
 776	  and TLC59116 LED controllers.
 777
 778config LEDS_MAX77650
 779	tristate "LED support for Maxim MAX77650 PMIC"
 780	depends on LEDS_CLASS && MFD_MAX77650
 781	help
 782	  LEDs driver for MAX77650 family of PMICs from Maxim Integrated.
 783
 784config LEDS_MAX77705
 785	tristate "LED support for Maxim MAX77705 PMIC"
 786	depends on MFD_MAX77705
 787	depends on LEDS_CLASS
 788	depends on LEDS_CLASS_MULTICOLOR
 789	help
 790	  LED driver for MAX77705 PMIC from Maxim Integrated.
 791
 792config LEDS_MAX8997
 793	tristate "LED support for MAX8997 PMIC"
 794	depends on LEDS_CLASS && MFD_MAX8997
 795	help
 796	  This option enables support for on-chip LED drivers on
 797	  MAXIM MAX8997 PMIC.
 798
 799config LEDS_LM355x
 800	tristate "LED support for LM3554 and LM3556 chips"
 801	depends on LEDS_CLASS && I2C
 802	select REGMAP_I2C
 803	help
 804	  This option enables support for LEDs connected to LM3554
 805	  and LM3556. It includes Torch, Flash and Indicator functions.
 806
 807config LEDS_OT200
 808	tristate "LED support for the Bachmann OT200"
 809	depends on LEDS_CLASS && HAS_IOPORT && (X86_32 || COMPILE_TEST)
 810	help
 811	  This option enables support for the LEDs on the Bachmann OT200.
 812	  Say Y to enable LEDs on the Bachmann OT200.
 813
 814config LEDS_MENF21BMC
 815	tristate "LED support for the MEN 14F021P00 BMC"
 816	depends on LEDS_CLASS && MFD_MENF21BMC
 817	help
 818	  Say Y here to include support for the MEN 14F021P00 BMC LEDs.
 819
 820	  This driver can also be built as a module. If so the module
 821	  will be called leds-menf21bmc.
 822
 823config LEDS_IS31FL319X
 824	tristate "LED Support for ISSI IS31FL319x I2C LED controller family"
 825	depends on LEDS_CLASS && I2C
 826	select REGMAP_I2C
 827	help
 828	  This option enables support for LEDs connected to ISSI IS31FL319x
 829	  fancy LED driver chips accessed via the I2C bus.
 830	  Driver supports individual PWM brightness control for each channel.
 831
 832	  This driver can also be built as a module. If so the module will be
 833	  called leds-is31fl319x.
 834
 835config LEDS_IS31FL32XX
 836	tristate "LED support for ISSI IS31FL32XX I2C LED controller family"
 837	depends on LEDS_CLASS && I2C && OF
 838	help
 839	  Say Y here to include support for ISSI IS31FL32XX and Si-En SN32xx
 840	  LED controllers. They are I2C devices with multiple constant-current
 841	  channels, each with independent 256-level PWM control.
 842
 843config LEDS_SC27XX_BLTC
 844	tristate "LED support for the SC27xx breathing light controller"
 845	depends on LEDS_CLASS && MFD_SC27XX_PMIC
 846	depends on OF
 847	help
 848	  Say Y here to include support for the SC27xx breathing light controller
 849	  LEDs.
 850
 851	  This driver can also be built as a module. If so the module will be
 852	  called leds-sc27xx-bltc.
 853
 854config LEDS_UPBOARD
 855	tristate "LED support for the UP board"
 856	depends on LEDS_CLASS && MFD_UPBOARD_FPGA
 857	help
 858	  This option enables support for the UP board LEDs.
 859
 860	  This driver can also be built as a module. If so the module will be
 861	  called leds-upboard.
 862
 863comment "LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)"
 864
 865config LEDS_BLINKM
 866	tristate "LED support for the BlinkM I2C RGB LED"
 867	depends on LEDS_CLASS
 868	depends on I2C
 869	help
 870	  This option enables support for the BlinkM RGB LED connected
 871	  through I2C. Say Y to enable support for the BlinkM LED.
 872
 873config LEDS_BLINKM_MULTICOLOR
 874	bool "Enable multicolor support for BlinkM I2C RGB LED"
 875	depends on LEDS_BLINKM
 876	depends on LEDS_CLASS_MULTICOLOR=y || LEDS_CLASS_MULTICOLOR=LEDS_BLINKM
 877	help
 878	  This option enables multicolor sysfs class support for BlinkM LED and
 879	  disables the older, separated sysfs interface
 880
 881config LEDS_POWERNV
 882	tristate "LED support for PowerNV Platform"
 883	depends on LEDS_CLASS
 884	depends on PPC_POWERNV
 885	depends on OF
 886	help
 887	  This option enables support for the system LEDs present on
 888	  PowerNV platforms. Say 'y' to enable this support in kernel.
 889	  To compile this driver as a module, choose 'm' here: the module
 890	  will be called leds-powernv.
 891
 892config LEDS_SYSCON
 893	bool "LED support for LEDs on system controllers"
 894	depends on LEDS_CLASS=y
 895	depends on MFD_SYSCON
 896	depends on OF
 897	help
 898	  This option enables support for the LEDs on syscon type
 899	  devices. This will only work with device tree enabled
 900	  devices.
 901
 902config LEDS_PM8058
 903	tristate "LED Support for the Qualcomm PM8058 PMIC"
 904	depends on MFD_PM8XXX
 905	depends on LEDS_CLASS
 906	help
 907	  Choose this option if you want to use the LED drivers in
 908	  the Qualcomm PM8058 PMIC.
 909
 910config LEDS_MLXCPLD
 911	tristate "LED support for the Mellanox boards"
 912	depends on X86 && DMI
 913	depends on LEDS_CLASS
 914	help
 915	  This option enables support for the LEDs on the Mellanox
 916	  boards. Say Y to enable these.
 917
 918config LEDS_MLXREG
 919	tristate "LED support for the Mellanox switches management control"
 920	depends on LEDS_CLASS
 921	help
 922	  This option enables support for the LEDs on the Mellanox Ethernet and
 923	  InfiniBand switches. The driver can be activated by the platform device
 924	  device add call. Say Y to enable these. To compile this driver as a
 925	  module, choose 'M' here: the module will be called leds-mlxreg.
 926
 927config LEDS_USER
 928	tristate "Userspace LED support"
 929	depends on LEDS_CLASS
 930	help
 931	  This option enables support for userspace LEDs. Say 'y' to enable this
 932	  support in kernel. To compile this driver as a module, choose 'm' here:
 933	  the module will be called uleds.
 934
 935config LEDS_NIC78BX
 936	tristate "LED support for NI PXI NIC78bx devices"
 937	depends on LEDS_CLASS
 938	depends on HAS_IOPORT
 939	depends on X86 || COMPILE_TEST
 940	help
 941	  This option enables support for the User1 and User2 LEDs on NI
 942	  PXI NIC78bx devices.
 943
 944	  To compile this driver as a module, choose M here: the module
 945	  will be called leds-nic78bx.
 946
 947config LEDS_SPI_BYTE
 948	tristate "LED support for SPI LED controller with a single byte"
 949	depends on LEDS_CLASS
 950	depends on SPI
 951	help
 952	  This option enables support for LED controller which use a single byte
 953	  for controlling the brightness. Currently the following controller is
 954	  supported: Ubiquiti airCube ISP microcontroller based LED controller.
 955
 956config LEDS_TI_LMU_COMMON
 957	tristate "LED driver for TI LMU" if COMPILE_TEST
 958	select REGMAP
 959	help
 960	  Say Y to enable the LED driver for TI LMU devices.
 961	  This supports common features between the TI LM3532, LM3631, LM3632,
 962	  LM3633, LM3695 and LM3697.
 963
 964config LEDS_LM3697
 965	tristate "LED driver for LM3697"
 966	depends on LEDS_CLASS && I2C && OF
 967	select LEDS_TI_LMU_COMMON
 968	help
 969	  Say Y to enable the LM3697 LED driver for TI LMU devices.
 970	  This supports the LED device LM3697.
 971
 972config LEDS_LM36274
 973	tristate "LED driver for LM36274"
 974	depends on LEDS_CLASS && MFD_TI_LMU
 975	select LEDS_TI_LMU_COMMON
 976	help
 977	  Say Y to enable the LM36274 LED driver for TI LMU devices.
 978	  This supports the LED device LM36274.
 979
 980config LEDS_ST1202
 981	tristate "LED Support for STMicroelectronics LED1202 I2C chips"
 982	depends on LEDS_CLASS
 983	depends on I2C
 984	depends on OF
 985	select LEDS_TRIGGERS
 986	select LEDS_TRIGGER_PATTERN
 987	help
 988	  Say Y to enable support for LEDs connected to LED1202
 989	  LED driver chips accessed via the I2C bus.
 990
 991config LEDS_TPS6105X
 992	tristate "LED support for TI TPS6105X"
 993	depends on LEDS_CLASS
 994	depends on TPS6105X
 995	default y if TPS6105X
 996	help
 997	  This driver supports TPS61050/TPS61052 LED chips.
 998	  It is a single boost converter primarily for white LEDs and
 999	  audio amplifiers.
1000
1001config LEDS_IP30
1002	tristate "LED support for SGI Octane machines"
1003	depends on LEDS_CLASS
1004	depends on SGI_MFD_IOC3 || COMPILE_TEST
1005	help
1006	  This option enables support for the Red and White LEDs of
1007	  SGI Octane machines.
1008
1009	  To compile this driver as a module, choose M here: the module
1010	  will be called leds-ip30.
1011
1012config LEDS_ACER_A500
1013	tristate "Power button LED support for Acer Iconia Tab A500"
1014	depends on LEDS_CLASS && MFD_ACER_A500_EC
1015	help
1016	  This option enables support for the Power Button LED of
1017	  Acer Iconia Tab A500.
1018
1019source "drivers/leds/blink/Kconfig"
1020
1021comment "Flash and Torch LED drivers"
1022source "drivers/leds/flash/Kconfig"
1023
1024comment "RGB LED drivers"
1025source "drivers/leds/rgb/Kconfig"
1026
1027comment "LED Triggers"
1028source "drivers/leds/trigger/Kconfig"
1029
1030comment "Simatic LED drivers"
1031source "drivers/leds/simatic/Kconfig"
1032
1033endif # NEW_LEDS