Kconfig

  1# SPDX-License-Identifier: GPL-2.0-only
  2#
  3# Temperature sensor drivers
  4#
  5menu "Temperature sensors"
  6
  7config IQS620AT_TEMP
  8	tristate "Azoteq IQS620AT temperature sensor"
  9	depends on MFD_IQS62X || COMPILE_TEST
 10	help
 11	  Say Y here if you want to build support for the Azoteq IQS620AT
 12	  temperature sensor.
 13
 14	  To compile this driver as a module, choose M here: the module
 15	  will be called iqs620at-temp.
 16
 17config LTC2983
 18	tristate "Analog Devices Multi-Sensor Digital Temperature Measurement System"
 19	depends on SPI
 20	select REGMAP_SPI
 21	help
 22	  Say yes here to build support for the LTC2983 Multi-Sensor
 23	  high accuracy digital temperature measurement system.
 24
 25	  To compile this driver as a module, choose M here: the module
 26	  will be called ltc2983.
 27
 28config MAXIM_THERMOCOUPLE
 29	tristate "Maxim thermocouple sensors"
 30	depends on SPI
 31	select IIO_BUFFER
 32	select IIO_TRIGGERED_BUFFER
 33	help
 34	  If you say yes here you get support for the Maxim series of
 35	  thermocouple sensors connected via SPI.
 36
 37	  Supported sensors:
 38	   * MAX6675
 39	   * MAX31855
 40
 41	  This driver can also be built as a module. If so, the module will
 42	  be called maxim_thermocouple.
 43
 44config HID_SENSOR_TEMP
 45	tristate "HID Environmental temperature sensor"
 46	depends on HID_SENSOR_HUB
 47	select IIO_BUFFER
 48	select HID_SENSOR_IIO_COMMON
 49	select HID_SENSOR_IIO_TRIGGER
 50	help
 51	  Say yes here to build support for the HID SENSOR
 52	  temperature driver
 53
 54	  To compile this driver as a module, choose M here: the module
 55	  will be called hid-sensor-temperature.
 56
 57config MLX90614
 58	tristate "MLX90614 contact-less infrared sensor"
 59	depends on I2C
 60	help
 61	  If you say yes here you get support for the Melexis
 62	  MLX90614 contact-less infrared sensor connected with I2C.
 63
 64	  This driver can also be built as a module. If so, the module will
 65	  be called mlx90614.
 66
 67config MLX90632
 68	tristate "MLX90632 contact-less infrared sensor with medical accuracy"
 69	depends on I2C
 70	select REGMAP_I2C
 71	help
 72	  If you say yes here you get support for the Melexis
 73	  MLX90632 contact-less infrared sensor with medical accuracy
 74	  connected with I2C.
 75
 76	  This driver can also be built as a module. If so, the module will
 77	  be called mlx90632.
 78
 79config MLX90635
 80	tristate "MLX90635 contact-less infrared sensor with medical accuracy"
 81	depends on I2C
 82	select REGMAP_I2C
 83	help
 84	  If you say yes here you get support for the Melexis
 85	  MLX90635 contact-less infrared sensor with medical accuracy
 86	  connected with I2C.
 87
 88	  This driver can also be built as a module. If so, the module will
 89	  be called mlx90635.
 90
 91config TMP006
 92	tristate "TMP006 infrared thermopile sensor"
 93	depends on I2C
 94	select IIO_BUFFER
 95	select IIO_TRIGGERED_BUFFER
 96	help
 97	  If you say yes here you get support for the Texas Instruments
 98	  TMP006 infrared thermopile sensor.
 99
100	  This driver can also be built as a module. If so, the module will
101	  be called tmp006.
102
103config TMP007
104	tristate "TMP007 infrared thermopile sensor with Integrated Math Engine"
105	depends on I2C
106	help
107	  If you say yes here you get support for the Texas Instruments
108	  TMP007 infrared thermopile sensor with Integrated Math Engine.
109
110	  This driver can also be built as a module. If so, the module will
111	  be called tmp007.
112
113config TMP117
114	tristate "TMP117 Digital temperature sensor with integrated NV memory"
115	depends on I2C
116	help
117	  If you say yes here you get support for the Texas Instruments
118	  TMP117 Digital temperature sensor with integrated NV memory.
119
120	  This driver can also be built as a module. If so, the module will
121	  be called tmp117.
122
123config TSYS01
124	tristate "Measurement Specialties TSYS01 temperature sensor using I2C bus connection"
125	depends on I2C
126	select IIO_MS_SENSORS_I2C
127	help
128	  If you say yes here you get support for the Measurement Specialties
129	  TSYS01 I2C temperature sensor.
130
131	  This driver can also be built as a module. If so, the module will
132	  be called tsys01.
133
134config TSYS02D
135	tristate "Measurement Specialties TSYS02D temperature sensor"
136	depends on I2C
137	select IIO_MS_SENSORS_I2C
138	help
139	  If you say yes here you get support for the Measurement Specialties
140	  TSYS02D temperature sensor.
141
142	  This driver can also be built as a module. If so, the module will
143	  be called tsys02d.
144
145config MAX30208
146	tristate "Maxim MAX30208 digital temperature sensor"
147	depends on I2C
148	help
149	  If you say yes here you get support for Maxim MAX30208
150	  digital temperature sensor connected via I2C.
151
152	  This driver can also be built as a module. If so, the module
153	  will be called max30208.
154
155config MAX31856
156	tristate "MAX31856 thermocouple sensor"
157	depends on SPI
158	help
159	  If you say yes here you get support for MAX31856
160	  thermocouple sensor chip connected via SPI.
161
162	  This driver can also be built as a module.  If so, the module
163	  will be called max31856.
164
165config MAX31865
166	tristate "MAX31865 RTD to Digital converter"
167	depends on SPI
168	help
169	  If you say yes here you get support for MAX31865
170	  thermocouple sensor chip connected via SPI.
171
172	  This driver can also be build as a module. If so, the module
173	  will be called max31865.
174
175config MCP9600
176	tristate "MCP9600 and similar thermocouple EMF converters"
177	depends on I2C
178	help
179	  If you say yes here you get support for...
180	  - MCP9600
181	  - MCP9601
182	  ...thermocouple EMF converters connected via I2C.
183
184	  This driver can also be built as a module. If so, the module
185	  will be called mcp9600.
186
187endmenu