Kconfig

  1# SPDX-License-Identifier: GPL-2.0-only
  2#
  3# humidity sensor drivers
  4#
  5menu "Humidity sensors"
  6
  7config AM2315
  8	tristate "Aosong AM2315 relative humidity and temperature sensor"
  9	depends on I2C
 10	select IIO_BUFFER
 11	select IIO_TRIGGERED_BUFFER
 12	help
 13	  If you say yes here you get support for the Aosong AM2315
 14	  relative humidity and ambient temperature sensor.
 15
 16	  This driver can also be built as a module. If so, the module will
 17	  be called am2315.
 18
 19config DHT11
 20	tristate "DHT11 (and compatible sensors) driver"
 21	depends on GPIOLIB || COMPILE_TEST
 22	help
 23	  This driver supports reading data via a single interrupt
 24	  generating GPIO line. Currently tested are DHT11 and DHT22.
 25	  Other sensors should work as well as long as they speak the
 26	  same protocol.
 27
 28config ENS210
 29	tristate "ENS210 temperature and humidity sensor"
 30	depends on I2C
 31	select CRC7
 32	help
 33	  Say yes here to get support for the ScioSense ENS210 family of
 34	  humidity and temperature sensors.
 35
 36	  This driver can also be built as a module. If so, the module will be
 37	  called ens210.
 38
 39config HDC100X
 40	tristate "TI HDC100x relative humidity and temperature sensor"
 41	depends on I2C
 42	select IIO_BUFFER
 43	select IIO_TRIGGERED_BUFFER
 44	help
 45	  Say yes here to build support for the Texas Instruments
 46	  HDC1000, HDC1008, HDC1010, HDC1050, and HDC1080 relative
 47	  humidity and temperature sensors.
 48
 49	  To compile this driver as a module, choose M here: the module
 50	  will be called hdc100x.
 51
 52config HDC2010
 53	tristate "TI HDC2010 relative humidity and temperature sensor"
 54	depends on I2C
 55	help
 56	  Say yes here to build support for the Texas Instruments
 57	  HDC2010 and HDC2080 relative humidity and temperature sensors.
 58
 59	  To compile this driver as a module, choose M here: the module
 60	  will be called hdc2010.
 61
 62config HDC3020
 63	tristate "TI HDC3020 relative humidity and temperature sensor"
 64	depends on I2C
 65	select CRC8
 66	help
 67	  Say yes here to build support for the Texas Instruments
 68	  HDC3020, HDC3021 and HDC3022 relative humidity and temperature
 69	  sensors.
 70
 71	  To compile this driver as a module, choose M here: the module
 72	  will be called hdc3020.
 73
 74config HID_SENSOR_HUMIDITY
 75	tristate "HID Environmental humidity sensor"
 76	depends on HID_SENSOR_HUB
 77	select IIO_BUFFER
 78	select HID_SENSOR_IIO_COMMON
 79	select HID_SENSOR_IIO_TRIGGER
 80	help
 81	  Say yes here to build support for the HID SENSOR
 82	  humidity driver
 83
 84	  To compile this driver as a module, choose M here: the module
 85	  will be called hid-sensor-humidity.
 86
 87config HTS221
 88	tristate "STMicroelectronics HTS221 sensor Driver"
 89	depends on (I2C || SPI)
 90	select IIO_BUFFER
 91	select IIO_TRIGGERED_BUFFER
 92	select HTS221_I2C if (I2C)
 93	select HTS221_SPI if (SPI_MASTER)
 94	help
 95	  Say yes here to build support for STMicroelectronics HTS221
 96	  temperature-humidity sensor
 97
 98	  To compile this driver as a module, choose M here: the module
 99	  will be called hts221.
100
101config HTS221_I2C
102	tristate
103	depends on HTS221
104	select REGMAP_I2C
105
106config HTS221_SPI
107	tristate
108	depends on HTS221
109	select REGMAP_SPI
110
111config HTU21
112	tristate "Measurement Specialties HTU21 humidity & temperature sensor"
113	depends on I2C
114	select IIO_MS_SENSORS_I2C
115	help
116	  If you say yes here you get support for the Measurement Specialties
117	  HTU21 humidity and temperature sensor.
118	  This driver is also used for MS8607 temperature, pressure & humidity
119	  sensor
120
121	  This driver can also be built as a module. If so, the module will
122	  be called htu21.
123
124config SI7005
125	tristate "SI7005 relative humidity and temperature sensor"
126	depends on I2C
127	help
128	  Say yes here to build support for the Silabs Si7005 relative
129	  humidity and temperature sensor.
130
131	  To compile this driver as a module, choose M here: the module
132	  will be called si7005. This driver also
133	  supports Hoperf TH02 Humidity and Temperature Sensor.
134
135config SI7020
136	tristate "Si7013/20/21 Relative Humidity and Temperature Sensors"
137	depends on I2C
138	help
139	  Say yes here to build support for the Silicon Labs Si7013/20/21
140	  Relative Humidity and Temperature Sensors. This driver also
141	  supports Hoperf TH06 Humidity and Temperature Sensor.
142
143	  To compile this driver as a module, choose M here: the module
144	  will be called si7020.
145
146endmenu