pata_parport.h

 1/* SPDX-License-Identifier: GPL-2.0-only */
 2/*
 3 *	pata_parport.h	(c) 1997-8  Grant R. Guenther <grant@torque.net>
 4 *				    Under the terms of the GPL.
 5 *
 6 * This file defines the interface for parallel port IDE adapter chip drivers.
 7 */
 8
 9#ifndef LINUX_PATA_PARPORT_H
10#define LINUX_PATA_PARPORT_H
11
12#include <linux/libata.h>
13
14struct pi_adapter {
15	struct device dev;
16	struct pi_protocol *proto;	/* adapter protocol */
17	int port;			/* base address of parallel port */
18	int mode;			/* transfer mode in use */
19	int delay;			/* adapter delay setting */
20	int unit;			/* unit number for chained adapters */
21	int saved_r0;			/* saved port state */
22	int saved_r2;			/* saved port state */
23	unsigned long private;		/* for protocol module */
24	struct pardevice *pardev;	/* pointer to pardevice */
25};
26
27/* registers are addressed as (cont,regr)
28 *	cont: 0 for command register file, 1 for control register(s)
29 *	regr: 0-7 for register number.
30 */
31
32/* macros and functions exported to the protocol modules */
33#define delay_p			(pi->delay ? udelay(pi->delay) : (void)0)
34#define out_p(offs, byte)	do { outb(byte, pi->port + offs); delay_p; } while (0)
35#define in_p(offs)		(delay_p, inb(pi->port + offs))
36
37#define w0(byte)		out_p(0, byte)
38#define r0()			in_p(0)
39#define w1(byte)		out_p(1, byte)
40#define r1()			in_p(1)
41#define w2(byte)		out_p(2, byte)
42#define r2()			in_p(2)
43#define w3(byte)		out_p(3, byte)
44#define w4(byte)		out_p(4, byte)
45#define r4()			in_p(4)
46#define w4w(data)		do { outw(data, pi->port + 4); delay_p; } while (0)
47#define w4l(data)		do { outl(data, pi->port + 4); delay_p; } while (0)
48#define r4w()			(delay_p, inw(pi->port + 4))
49#define r4l()			(delay_p, inl(pi->port + 4))
50
51struct pi_protocol {
52	char name[8];
53
54	int max_mode;
55	int epp_first;		/* modes >= this use 8 ports */
56
57	int default_delay;
58	int max_units;		/* max chained units probed for */
59
60	void (*write_regr)(struct pi_adapter *pi, int cont, int regr, int val);
61	int (*read_regr)(struct pi_adapter *pi, int cont, int regr);
62	void (*write_block)(struct pi_adapter *pi, char *buf, int count);
63	void (*read_block)(struct pi_adapter *pi, char *buf, int count);
64
65	void (*connect)(struct pi_adapter *pi);
66	void (*disconnect)(struct pi_adapter *pi);
67
68	int (*test_port)(struct pi_adapter *pi);
69	int (*probe_unit)(struct pi_adapter *pi);
70	int (*test_proto)(struct pi_adapter *pi);
71	void (*log_adapter)(struct pi_adapter *pi);
72
73	int (*init_proto)(struct pi_adapter *pi);
74	void (*release_proto)(struct pi_adapter *pi);
75	struct module *owner;
76	struct device_driver driver;
77	struct scsi_host_template sht;
78};
79
80#define PATA_PARPORT_SHT ATA_PIO_SHT
81
82int pata_parport_register_driver(struct pi_protocol *pr);
83void pata_parport_unregister_driver(struct pi_protocol *pr);
84
85/**
86 * module_pata_parport_driver() - Helper macro for registering a pata_parport driver
87 * @__pi_protocol: pi_protocol struct
88 *
89 * Helper macro for pata_parport drivers which do not do anything special in module
90 * init/exit. This eliminates a lot of boilerplate. Each module may only
91 * use this macro once, and calling it replaces module_init() and module_exit()
92 */
93#define module_pata_parport_driver(__pi_protocol) \
94	module_driver(__pi_protocol, pata_parport_register_driver, pata_parport_unregister_driver)
95
96#endif /* LINUX_PATA_PARPORT_H */