Makefile

  1# SPDX-License-Identifier: GPL-2.0
  2#
  3# Makefile for the Linux kernel device drivers.
  4#
  5# 15 Sep 2000, Christoph Hellwig <hch@infradead.org>
  6# Rewritten to use lists instead of if-statements.
  7#
  8
  9obj-y				+= cache/
 10obj-y				+= irqchip/
 11obj-y				+= bus/
 12
 13obj-$(CONFIG_GENERIC_PHY)	+= phy/
 14
 15# GPIO must come after pinctrl as gpios may need to mux pins etc
 16obj-$(CONFIG_PINCTRL)		+= pinctrl/
 17obj-$(CONFIG_GPIOLIB)		+= gpio/
 18obj-y				+= pwm/
 19
 20# LEDs must come before PCI, it is needed by NPEM driver
 21obj-y				+= leds/
 22
 23obj-y				+= pci/
 24
 25obj-$(CONFIG_PARISC)		+= parisc/
 26obj-$(CONFIG_RAPIDIO)		+= rapidio/
 27obj-y				+= video/
 28obj-y				+= idle/
 29
 30# IPMI must come before ACPI in order to provide IPMI opregion support
 31obj-y				+= char/ipmi/
 32
 33obj-$(CONFIG_ACPI)		+= acpi/
 34
 35# PnP must come after ACPI since it will eventually need to check if acpi
 36# was used and do nothing if so
 37obj-$(CONFIG_PNP)		+= pnp/
 38obj-y				+= amba/
 39
 40obj-y				+= clk/
 41# Many drivers will want to use DMA so this has to be made available
 42# really early.
 43obj-$(CONFIG_DMADEVICES)	+= dma/
 44
 45# SOC specific infrastructure drivers.
 46obj-y				+= soc/
 47obj-$(CONFIG_PM_GENERIC_DOMAINS)	+= pmdomain/
 48
 49obj-y				+= virtio/
 50obj-$(CONFIG_VDPA)		+= vdpa/
 51obj-$(CONFIG_XEN)		+= xen/
 52
 53# regulators early, since some subsystems rely on them to initialize
 54obj-$(CONFIG_REGULATOR)		+= regulator/
 55
 56# reset controllers early, since gpu drivers might rely on them to initialize
 57obj-$(CONFIG_RESET_CONTROLLER)	+= reset/
 58
 59# tty/ comes before char/ so that the VT console is the boot-time
 60# default.
 61obj-y				+= tty/
 62obj-y				+= char/
 63
 64# iommu/ comes before gpu as gpu are using iommu controllers
 65obj-y				+= iommu/
 66
 67# gpu/ comes after char for AGP vs DRM startup and after iommu
 68obj-y				+= gpu/
 69
 70obj-$(CONFIG_CONNECTOR)		+= connector/
 71
 72# i810fb depends on char/agp/
 73obj-$(CONFIG_FB_I810)           += video/fbdev/i810/
 74
 75obj-$(CONFIG_PARPORT)		+= parport/
 76obj-y				+= base/ block/ misc/ mfd/ nfc/
 77obj-$(CONFIG_LIBNVDIMM)		+= nvdimm/
 78obj-y				+= dax/
 79obj-$(CONFIG_DMA_SHARED_BUFFER) += dma-buf/
 80obj-$(CONFIG_NUBUS)		+= nubus/
 81obj-y				+= cxl/
 82obj-y				+= macintosh/
 83obj-y				+= scsi/
 84obj-y				+= nvme/
 85obj-$(CONFIG_ATA)		+= ata/
 86obj-$(CONFIG_TARGET_CORE)	+= target/
 87obj-$(CONFIG_MTD)		+= mtd/
 88obj-$(CONFIG_SPI)		+= spi/
 89obj-$(CONFIG_SPMI)		+= spmi/
 90obj-$(CONFIG_HSI)		+= hsi/
 91obj-$(CONFIG_SLIMBUS)		+= slimbus/
 92obj-y				+= net/
 93obj-$(CONFIG_ATM)		+= atm/
 94obj-$(CONFIG_FUSION)		+= message/
 95obj-y				+= firewire/
 96obj-$(CONFIG_UIO)		+= uio/
 97obj-$(CONFIG_VFIO)		+= vfio/
 98obj-y				+= cdrom/
 99obj-y				+= auxdisplay/
100obj-$(CONFIG_PCCARD)		+= pcmcia/
101obj-$(CONFIG_DIO)		+= dio/
102obj-$(CONFIG_SBUS)		+= sbus/
103obj-$(CONFIG_ZORRO)		+= zorro/
104obj-$(CONFIG_ATA_OVER_ETH)	+= block/aoe/
105obj-$(CONFIG_TC)		+= tc/
106obj-$(CONFIG_USB_PHY)		+= usb/
107obj-$(CONFIG_USB)		+= usb/
108obj-$(CONFIG_USB_SUPPORT)	+= usb/
109obj-$(CONFIG_PCI)		+= usb/
110obj-$(CONFIG_USB_GADGET)	+= usb/
111obj-$(CONFIG_OF)		+= usb/
112obj-$(CONFIG_SERIO)		+= input/serio/
113obj-$(CONFIG_GAMEPORT)		+= input/gameport/
114obj-$(CONFIG_INPUT)		+= input/
115obj-$(CONFIG_RTC_LIB)		+= rtc/
116obj-y				+= i2c/ i3c/ media/
117obj-$(CONFIG_PPS)		+= pps/
118obj-y				+= ptp/
119obj-$(CONFIG_W1)		+= w1/
120obj-y				+= power/
121obj-$(CONFIG_HWMON)		+= hwmon/
122obj-$(CONFIG_THERMAL)		+= thermal/
123obj-$(CONFIG_WATCHDOG)		+= watchdog/
124obj-$(CONFIG_MD)		+= md/
125obj-$(CONFIG_BT)		+= bluetooth/
126obj-$(CONFIG_ACCESSIBILITY)	+= accessibility/
127obj-$(CONFIG_ISDN)		+= isdn/
128obj-$(CONFIG_EDAC)		+= edac/
129obj-$(CONFIG_EISA)		+= eisa/
130obj-$(CONFIG_PM_OPP)		+= opp/
131obj-$(CONFIG_CPU_FREQ)		+= cpufreq/
132obj-$(CONFIG_CPU_IDLE)		+= cpuidle/
133obj-y				+= mmc/
134obj-y				+= ufs/
135obj-$(CONFIG_MEMSTICK)		+= memstick/
136obj-$(CONFIG_INFINIBAND)	+= infiniband/
137obj-y				+= firmware/
138obj-$(CONFIG_FWCTL)		+= fwctl/
139obj-$(CONFIG_CRYPTO)		+= crypto/
140obj-$(CONFIG_SUPERH)		+= sh/
141obj-y				+= clocksource/
142obj-$(CONFIG_DCA)		+= dca/
143obj-$(CONFIG_HID_SUPPORT)	+= hid/
144obj-$(CONFIG_PPC_PS3)		+= ps3/
145obj-$(CONFIG_OF)		+= of/
146obj-$(CONFIG_SSB)		+= ssb/
147obj-$(CONFIG_BCMA)		+= bcma/
148obj-$(CONFIG_VHOST_RING)	+= vhost/
149obj-$(CONFIG_VHOST_IOTLB)	+= vhost/
150obj-$(CONFIG_VHOST)		+= vhost/
151obj-$(CONFIG_GREYBUS)		+= greybus/
152obj-$(CONFIG_COMEDI)		+= comedi/
153obj-$(CONFIG_GPIB)		+= gpib/
154obj-$(CONFIG_STAGING)		+= staging/
155obj-y				+= platform/
156
157obj-$(CONFIG_MAILBOX)		+= mailbox/
158obj-$(CONFIG_HWSPINLOCK)	+= hwspinlock/
159obj-$(CONFIG_REMOTEPROC)	+= remoteproc/
160obj-$(CONFIG_RPMSG)		+= rpmsg/
161obj-$(CONFIG_SOUNDWIRE)		+= soundwire/
162
163# Virtualization drivers
164obj-y				+= virt/
165obj-$(CONFIG_HYPERV)		+= hv/
166
167obj-$(CONFIG_PM_DEVFREQ)	+= devfreq/
168obj-$(CONFIG_EXTCON)		+= extcon/
169obj-$(CONFIG_MEMORY)		+= memory/
170obj-$(CONFIG_IIO)		+= iio/
171obj-$(CONFIG_IPACK_BUS)		+= ipack/
172obj-$(CONFIG_NTB)		+= ntb/
173obj-$(CONFIG_POWERCAP)		+= powercap/
174obj-$(CONFIG_MCB)		+= mcb/
175obj-$(CONFIG_PERF_EVENTS)	+= perf/
176obj-$(CONFIG_RAS)		+= ras/
177obj-$(CONFIG_USB4)		+= thunderbolt/
178obj-$(CONFIG_CORESIGHT)		+= hwtracing/coresight/
179obj-y				+= hwtracing/intel_th/
180obj-$(CONFIG_STM)		+= hwtracing/stm/
181obj-$(CONFIG_HISI_PTT)		+= hwtracing/ptt/
182obj-y				+= android/
183obj-$(CONFIG_NVMEM)		+= nvmem/
184obj-$(CONFIG_FPGA)		+= fpga/
185obj-$(CONFIG_FSI)		+= fsi/
186obj-$(CONFIG_TEE)		+= tee/
187obj-$(CONFIG_MULTIPLEXER)	+= mux/
188obj-$(CONFIG_SIOX)		+= siox/
189obj-$(CONFIG_GNSS)		+= gnss/
190obj-$(CONFIG_INTERCONNECT)	+= interconnect/
191obj-$(CONFIG_COUNTER)		+= counter/
192obj-$(CONFIG_MOST)		+= most/
193obj-$(CONFIG_PECI)		+= peci/
194obj-$(CONFIG_HTE)		+= hte/
195obj-$(CONFIG_DRM_ACCEL)		+= accel/
196obj-$(CONFIG_CDX_BUS)		+= cdx/
197obj-$(CONFIG_DPLL)		+= dpll/
198obj-y				+= resctrl/
199
200obj-$(CONFIG_DIBS)		+= dibs/
201obj-$(CONFIG_S390)		+= s390/