FILE
k3-am69-aquila.dtsi
File preview with syntax highlighting.
linux-6.19.14/arch/arm64/boot/dts/ti/k3-am69-aquila.dtsi
1// SPDX-License-Identifier: GPL-2.0-or-later OR MIT 2/* 3 * Copyright (C) 2025 Toradex 4 * 5 * https://www.toradex.com/computer-on-modules/aquila-arm-family/ti-am69 6 */ 7 8#include <dt-bindings/gpio/gpio.h> 9#include <dt-bindings/input/input.h> 10#include <dt-bindings/net/ti-dp83867.h> 11#include <dt-bindings/phy/phy-cadence.h> 12#include <dt-bindings/usb/pd.h> 13#include "k3-j784s4.dtsi" 14 15/ { 16 chosen { 17 stdout-path = "serial2:115200n8"; 18 }; 19 20 aliases { 21 can0 = &main_mcan10; 22 can1 = &mcu_mcan0; 23 can2 = &main_mcan13; 24 can3 = &mcu_mcan1; 25 eeprom0 = &som_eeprom; 26 ethernet0 = &mcu_cpsw_port1; 27 ethernet1 = &main_cpsw0_port8; 28 i2c0 = &wkup_i2c0; 29 i2c1 = &mcu_i2c0; 30 i2c2 = &mcu_i2c1; 31 i2c3 = &main_i2c0; 32 i2c4 = &main_i2c1; 33 i2c5 = &main_i2c2; 34 i2c6 = &main_i2c5; 35 mmc0 = &main_sdhci0; 36 mmc1 = &main_sdhci1; 37 rtc0 = &rtc_i2c; 38 serial0 = &main_uart4; 39 serial1 = &wkup_uart0; 40 serial2 = &main_uart8; 41 serial3 = &mcu_uart0; 42 usb0 = &usb0; 43 }; 44 45 aquila_key_power: gpio-key-power { 46 compatible = "gpio-keys"; 47 pinctrl-names = "default"; 48 pinctrl-0 = <&pinctrl_pwr_btn_int>; 49 status = "disabled"; 50 51 key-power { 52 /* Aquila CTRL_PWR_BTN_MICO# (AQUILA B93) */ 53 gpios = <&wkup_gpio0 36 GPIO_ACTIVE_LOW>; 54 label = "Power Button"; 55 linux,code = <KEY_POWER>; 56 }; 57 }; 58 59 aquila_key_wake: gpio-key-wakeup { 60 compatible = "gpio-keys"; 61 pinctrl-names = "default"; 62 pinctrl-0 = <&pinctrl_ctrl_wake1_mico>; 63 status = "disabled"; 64 65 key-wakeup { 66 /* Aquila CTRL_WAKE1_MICO# (AQUILA D6) */ 67 gpios = <&wkup_gpio0 49 GPIO_ACTIVE_LOW>; 68 label = "Wake Up"; 69 linux,code = <KEY_WAKEUP>; 70 wakeup-source; 71 }; 72 }; 73 74 /* Aquila CTRL_RESET_MICO# (AQUILA B92) */ 75 gpio-restart { 76 compatible = "gpio-restart"; 77 /* COLD_RESET_REQ */ 78 gpios = <&som_gpio_expander 1 GPIO_ACTIVE_HIGH>; 79 priority = <192>; 80 }; 81 82 /* PWR_DOWN_REQ */ 83 gpio-poweroff { 84 compatible = "gpio-poweroff"; 85 /* PWR_DOWN_REQ */ 86 gpios = <&som_gpio_expander 2 GPIO_ACTIVE_HIGH>; 87 timeout-ms = <3000>; 88 }; 89 90 memory@80000000 { 91 device_type = "memory"; 92 /* 32G RAM */ 93 reg = <0x00 0x80000000 0x00 0x80000000>, 94 <0x08 0x80000000 0x07 0x80000000>; 95 }; 96 97 reserved_memory: reserved-memory { 98 #address-cells = <2>; 99 #size-cells = <2>; 100 ranges; 101 102 secure_ddr: optee@9e800000 { 103 reg = <0x00 0x9e800000 0x00 0x01800000>; 104 no-map; 105 }; 106 107 mcu_r5fss0_core0_dma_memory_region: memory@a0000000 { 108 compatible = "shared-dma-pool"; 109 reg = <0x00 0xa0000000 0x00 0x100000>; 110 no-map; 111 }; 112 113 mcu_r5fss0_core0_memory_region: memory@a0100000 { 114 compatible = "shared-dma-pool"; 115 reg = <0x00 0xa0100000 0x00 0xf00000>; 116 no-map; 117 }; 118 }; 119 120 /* Module Power Supply (VCC) */ 121 reg_vin: regulator-vin { 122 compatible = "regulator-fixed"; 123 regulator-name = "+V_IN"; 124 }; 125 126 /* Enabled by EN_3V3_VIO (PMIC_GPIO_9) */ 127 reg_1v1_usb_bridge: regulator-1v1-vio { 128 compatible = "regulator-fixed"; 129 regulator-max-microvolt = <1100000>; 130 regulator-min-microvolt = <1100000>; 131 regulator-name = "+V1.1_VIO"; 132 vin-supply = <®_vin>; 133 }; 134 135 reg_3v3_wifi: regulator-3v3-wifi { 136 compatible = "regulator-fixed"; 137 pinctrl-names = "default"; 138 pinctrl-0 = <&pinctrl_en_3v3_wifi>; 139 gpio = <&wkup_gpio0 57 GPIO_ACTIVE_HIGH>; 140 enable-active-high; 141 regulator-always-on; 142 regulator-boot-on; 143 regulator-max-microvolt = <3300000>; 144 regulator-min-microvolt = <3300000>; 145 regulator-name = "+V3.3_WIFI"; 146 startup-delay-us = <20000>; 147 vin-supply = <®_vin>; 148 }; 149 150 reg_1v8_stby: regulator-1v8-stby { 151 compatible = "regulator-fixed"; 152 regulator-max-microvolt = <1800000>; 153 regulator-min-microvolt = <1800000>; 154 regulator-name = "+V1.8_STBY"; 155 vin-supply = <®_vin>; 156 }; 157 158 /* Aquila SD_1_PWR_EN */ 159 reg_sdhc1_vmmc: regulator-sdhci1 { 160 compatible = "regulator-fixed"; 161 pinctrl-names = "default"; 162 pinctrl-0 = <&pinctrl_sd1_pwr_en>; 163 /* Aquila SD_1_PWR_EN (AQUILA A6) */ 164 gpio = <&main_gpio0 52 GPIO_ACTIVE_HIGH>; 165 enable-active-high; 166 off-on-delay-us = <100000>; 167 regulator-max-microvolt = <3300000>; 168 regulator-min-microvolt = <3300000>; 169 regulator-name = "+3V3_SD"; 170 startup-delay-us = <20000>; 171 }; 172 173 reg_sdhc1_vqmmc: regulator-sdhci1-vqmmc { 174 compatible = "regulator-gpio"; 175 /* SDIO_PWR_SEL_3.3V */ 176 gpios = <&som_gpio_expander 7 GPIO_ACTIVE_HIGH>; 177 regulator-max-microvolt = <3300000>; 178 regulator-min-microvolt = <1800000>; 179 regulator-name = "+VDD_SD_DV"; 180 states = <1800000 0x0>, 181 <3300000 0x1>; 182 }; 183 184 /* On-module USB_1_SS mux */ 185 usb0ss_mux: gpio-sbu-mux { 186 compatible = "ti,tmuxhs4212", "gpio-sbu-mux"; 187 orientation-switch; 188 /* USB_MUX_SEL */ 189 select-gpios = <&som_gpio_expander 0 GPIO_ACTIVE_HIGH>; 190 status = "disabled"; 191 }; 192}; 193 194&main_pmx0 { 195 /* Aquila DP_1_HPD */ 196 pinctrl_main_dp0_hpd: main-dp0-hpd-default-pins { 197 pinctrl-single,pins = < 198 J784S4_IOPAD(0x014, PIN_INPUT, 13) /* (AG33) MCAN14_TX.DP0_HPD */ /* AQUILA B59 */ 199 >; 200 }; 201 202 /* Aquila PWM_1 */ 203 pinctrl_main_ehrpwm0_b: main-ehrpwm0b-default-pins { 204 pinctrl-single,pins = < 205 J784S4_IOPAD(0x064, PIN_OUTPUT, 9) /* (AF38) MCAN0_TX.EHRPWM0_B */ /* AQUILA C25 */ 206 >; 207 }; 208 209 /* Aquila PWM_2 */ 210 pinctrl_main_ehrpwm1_a: main-ehrpwm1a-default-pins { 211 pinctrl-single,pins = < 212 J784S4_IOPAD(0x060, PIN_OUTPUT, 9) /* (AE36) MCASP2_AXR1.EHRPWM1_A */ /* AQUILA C26 */ 213 >; 214 }; 215 216 /* Aquila PWM_3_DSI */ 217 pinctrl_main_ehrpwm5_a: main-ehrpwm5a-default-pins { 218 pinctrl-single,pins = < 219 J784S4_IOPAD(0x084, PIN_OUTPUT, 9) /* (AG38) MCASP0_AXR5.EHRPWM5_A */ /* AQUILA B46 */ 220 >; 221 }; 222 223 /* Aquila PWM_4_DP */ 224 pinctrl_main_ehrpwm2_a: main-ehrpwm2a-default-pins { 225 pinctrl-single,pins = < 226 J784S4_IOPAD(0x040, PIN_INPUT, 9) /* (AF37) MCASP0_AXR0.EHRPWM2_A */ /* AQUILA B58 */ 227 >; 228 }; 229 230 /* PMIC_INT# */ 231 pinctrl_pmic_int: main-gpio0-0-default-pins { 232 pinctrl-single,pins = < 233 J784S4_IOPAD(0x000, PIN_INPUT, 7) /* (AN35) EXTINTn.GPIO0_0 */ 234 >; 235 }; 236 237 /* Aquila GPIO_09_CSI_1 */ 238 pinctrl_gpio_09_csi_1: main-gpio0-1-default-pins { 239 pinctrl-single,pins = < 240 J784S4_IOPAD(0x004, PIN_INPUT, 7) /* (AG36) MCAN12_TX.GPIO0_1 */ /* AQUILA B17 */ 241 >; 242 }; 243 244 /* Aquila GPIO_10_CSI_1 */ 245 pinctrl_gpio_10_csi_1: main-gpio0-2-default-pins { 246 pinctrl-single,pins = < 247 J784S4_IOPAD(0x008, PIN_INPUT, 7) /* (AJ33) MCAN12_RX.GPIO0_2 */ /* AQUILA B18 */ 248 >; 249 }; 250 251 /* Aquila USB_1_OC# */ 252 pinctrl_usb1_oc: main-gpio0-10-default-pins { 253 pinctrl-single,pins = < 254 J784S4_IOPAD(0x028, PIN_INPUT, 7) /* (AE33) MCAN16_RX.GPIO0_10 */ /* AQUILA B75 */ 255 >; 256 }; 257 258 /* Aquila USB_1_EN */ 259 pinctrl_usb1_en_gpio: main-gpio0-11-default-pins { 260 pinctrl-single,pins = < 261 J784S4_IOPAD(0x02c, PIN_INPUT, 7) /* (AL32) GPIO0_11 */ /* AQUILA B77 */ 262 >; 263 }; 264 265 /* Aquila GPIO_17_DSI_1 */ 266 pinctrl_gpio_17_dsi_1: main-gpio0-12-default-pins { 267 pinctrl-single,pins = < 268 J784S4_IOPAD(0x030, PIN_INPUT, 7) /* (AK37) GPIO0_12 */ /* AQUILA B42 */ 269 >; 270 }; 271 272 /* Aquila GPIO_19_DSI_1 */ 273 pinctrl_gpio_19_dsi_1: main-gpio0-13-default-pins { 274 pinctrl-single,pins = < 275 J784S4_IOPAD(0x034, PIN_INPUT, 7) /* (AJ34) PMIC_WAKE0n.GPIO0_13 */ /* AQUILA B44 */ 276 >; 277 }; 278 279 /* Aquila GPIO_02 */ 280 pinctrl_gpio_02: main-gpio0-17-default-pins { 281 pinctrl-single,pins = < 282 J784S4_IOPAD(0x044, PIN_INPUT, 7) /* (AG37) MCASP0_AXR1.GPIO0_17 */ /* AQUILA D24 */ 283 >; 284 }; 285 286 /* Aquila GPIO_20_DSI_1 */ 287 pinctrl_gpio_20_dsi_1: main-gpio0-18-default-pins { 288 pinctrl-single,pins = < 289 J784S4_IOPAD(0x048, PIN_INPUT, 7) /* (AK33) MCASP0_AXR2.GPIO0_18 */ /* AQUILA B45 */ 290 >; 291 }; 292 293 /* Aquila GPIO_21_DP */ 294 pinctrl_gpio_21_dp: main-gpio0-21-default-pins { 295 pinctrl-single,pins = < 296 J784S4_IOPAD(0x054, PIN_INPUT, 7) /* (AD37) MCASP2_ACLKX.GPIO0_21 */ /* AQUILA B57 */ 297 >; 298 }; 299 300 /* Aquila USB_1_INT# */ 301 pinctrl_usb1_int: main-gpio0-28-default-pins { 302 pinctrl-single,pins = < 303 J784S4_IOPAD(0x070, PIN_INPUT, 7) /* (AH38) MCAN1_RX.GPIO0_28 */ /* AQUILA B74 */ 304 >; 305 }; 306 307 /* Aquila GPIO_03 */ 308 pinctrl_gpio_03: main-gpio0-29-default-pins { 309 pinctrl-single,pins = < 310 J784S4_IOPAD(0x074, PIN_INPUT, 7) /* (AC33) MCAN2_TX.GPIO0_29 */ /* AQUILA D25 */ 311 >; 312 }; 313 314 /* Aquila GPIO_18_DSI_1 */ 315 pinctrl_gpio_18_dsi_1: main-gpio0-31-default-pins { 316 pinctrl-single,pins = < 317 J784S4_IOPAD(0x07c, PIN_INPUT, 7) /* (AJ38) MCASP0_AXR3.GPIO0_31 */ /* AQUILA B43 */ 318 >; 319 }; 320 321 /* Aquila PCIE_1_RESET# */ 322 pinctrl_pcie0_reset: main-gpio0-32-default-pins { 323 pinctrl-single,pins = < 324 J784S4_IOPAD(0x080, PIN_INPUT, 7) /* (AK34) MCASP0_AXR4.GPIO0_32 */ /* AQUILA C38 */ 325 >; 326 }; 327 328 /* Aquila PWM_3_DSI as GPIO */ 329 pinctrl_pwm3_dsi_gpio: main-gpio0-33-default-pins { 330 pinctrl-single,pins = < 331 J784S4_IOPAD(0x084, PIN_INPUT, 7) /* (AG38) MCASP0_AXR5.GPIO0_33 */ /* AQUILA B46 */ 332 >; 333 }; 334 335 /* Aquila GPIO_01 */ 336 pinctrl_gpio_01: main-gpio0-34-default-pins { 337 pinctrl-single,pins = < 338 J784S4_IOPAD(0x088, PIN_INPUT, 7) /* (AF36) MCASP0_AXR6.GPIO0_34 */ /* AQUILA D23 */ 339 >; 340 }; 341 342 /* Aquila PCIE_2_RESET# */ 343 pinctrl_pcie1_reset: main-gpio0-41-default-pins { 344 pinctrl-single,pins = < 345 J784S4_IOPAD(0x0a4, PIN_INPUT, 7) /* (AJ36) MCASP0_AXR13.GPIO0_41 */ /* AQUILA C35 */ 346 >; 347 }; 348 349 /* Aquila ETH_2_xGMII_INT# */ 350 pinctrl_eth2_int: main-gpio0-44-default-pins { 351 pinctrl-single,pins = < 352 J784S4_IOPAD(0x0b0, PIN_INPUT_PULLUP, 7) /* (AL33) MCASP1_AXR3.GPIO0_44 */ /* AQUILA B81 */ 353 >; 354 }; 355 356 /* Aquila GPIO_11_CSI_1 */ 357 pinctrl_gpio_11_csi_1: main-gpio0-47-default-pins { 358 pinctrl-single,pins = < 359 J784S4_IOPAD(0x0bc, PIN_INPUT, 7) /* (AD33) MCASP1_AFSX.GPIO0_47 */ /* AQUILA A11 */ 360 >; 361 }; 362 363 /* Aquila GPIO_12_CSI_1 */ 364 pinctrl_gpio_12_csi_1: main-gpio0-48-default-pins { 365 pinctrl-single,pins = < 366 J784S4_IOPAD(0x0c0, PIN_INPUT, 7) /* (AD38) MCASP1_AXR0.GPIO0_48 */ /* AQUILA B19 */ 367 >; 368 }; 369 370 /* Aquila SD_1_PWR_EN */ 371 pinctrl_sd1_pwr_en: main-gpio0-52-default-pins { 372 pinctrl-single,pins = < 373 J784S4_IOPAD(0x0d0, PIN_INPUT, 7) /* (AP38) SPI0_CS1.GPIO0_52 */ /* AQUILA A6 */ 374 >; 375 }; 376 377 /* Aquila SD_1_CD# as GPIO */ 378 pinctrl_sd1_cd_gpio: main-gpio0-58-default-pins { 379 pinctrl-single,pins = < 380 J784S4_IOPAD(0x0e8, PIN_INPUT_PULLUP, 7) /* (AR38) TIMER_IO0.GPIO0_58 */ /* AQUILA A1 */ 381 >; 382 }; 383 384 /* Aquila I2C_3_DSI1 */ 385 pinctrl_main_i2c0: main-i2c0-default-pins { 386 pinctrl-single,pins = < 387 J784S4_IOPAD(0x0e0, PIN_INPUT, 0) /* (AN36) I2C0_SCL */ /* AQUILA B41 */ 388 J784S4_IOPAD(0x0e4, PIN_INPUT, 0) /* (AP37) I2C0_SDA */ /* AQUILA B40 */ 389 >; 390 }; 391 392 /* Aquila I2C_4_CSI1 */ 393 pinctrl_main_i2c1: main-i2c1-default-pins { 394 pinctrl-single,pins = < 395 J784S4_IOPAD(0x020, PIN_INPUT_PULLUP, 12) /* (AJ35) MCAN15_RX.I2C1_SCL */ /* AQUILA A13 */ 396 J784S4_IOPAD(0x024, PIN_INPUT_PULLUP, 12) /* (AH34) MCAN16_TX.I2C1_SDA */ /* AQUILA A12 */ 397 >; 398 }; 399 400 /* Aquila I2C_5_CSI2 */ 401 pinctrl_main_i2c2: main-i2c2-default-pins { 402 pinctrl-single,pins = < 403 J784S4_IOPAD(0x04c, PIN_INPUT_PULLUP, 13) /* (AC32) MCASP1_AXR1.I2C2_SCL */ /* AQUILA C6 */ 404 J784S4_IOPAD(0x050, PIN_INPUT_PULLUP, 13) /* (AC37) MCASP1_AXR2.I2C2_SDA */ /* AQUILA C5 */ 405 >; 406 }; 407 408 /* Aquila I2C_6 */ 409 pinctrl_main_i2c5: main-i2c5-default-pins { 410 pinctrl-single,pins = < 411 J784S4_IOPAD(0x01c, PIN_INPUT_PULLUP, 8) /* (AG34) MCAN15_TX.I2C5_SCL */ /* AQUILA C19 */ 412 J784S4_IOPAD(0x018, PIN_INPUT_PULLUP, 8) /* (AK36) MCAN14_RX.I2C5_SDA */ /* AQUILA C18 */ 413 >; 414 }; 415 416 /* Aquila I2S_1_MCLK */ 417 pinctrl_audio_extrefclk1: audio-extrefclk1-default-pins { 418 pinctrl-single,pins = < 419 J784S4_IOPAD(0x078, PIN_OUTPUT, 1) /* (AH37) MCAN2_RX.AUDIO_EXT_REFCLK1 */ /* AQUILA B24 */ 420 >; 421 }; 422 423 /* Aquila CAN_1 */ 424 pinctrl_main_mcan10: main-mcan10-default-pins { 425 pinctrl-single,pins = < 426 J784S4_IOPAD(0x0b8, PIN_INPUT, 0) /* (AC34) MCASP1_ACLKX.MCAN10_RX */ /* AQUILA B49 */ 427 J784S4_IOPAD(0x0b4, PIN_OUTPUT, 0) /* (AL34) MCASP1_AXR4.MCAN10_TX */ /* AQUILA B48 */ 428 >; 429 }; 430 431 /* Aquila CAN_3 */ 432 pinctrl_main_mcan13: main-mcan13-default-pins { 433 pinctrl-single,pins = < 434 J784S4_IOPAD(0x010, PIN_INPUT, 0) /* (AH33) MCAN13_RX */ /* AQUILA B54 */ 435 J784S4_IOPAD(0x00c, PIN_OUTPUT, 0) /* (AF33) MCAN13_TX */ /* AQUILA B53 */ 436 >; 437 }; 438 439 /* Aquila I2S_1 */ 440 pinctrl_main_mcasp4: main-mcasp4-default-pins { 441 pinctrl-single,pins = < 442 J784S4_IOPAD(0x0c8, PIN_INPUT, 1) /* (AJ32) EXT_REFCLK1.MCASP4_ACLKX */ /* AQUILA B20 */ 443 J784S4_IOPAD(0x06c, PIN_INPUT, 1) /* (AJ37) MCAN1_TX.MCASP4_AFSX */ /* AQUILA B21 */ 444 J784S4_IOPAD(0x068, PIN_OUTPUT, 1) /* (AE38) MCAN0_RX.MCASP4_AXR1 */ /* AQUILA B22 */ 445 J784S4_IOPAD(0x0c4, PIN_INPUT, 1) /* (AD36) ECAP0_IN_APWM_OUT.MCASP4_AXR2 */ /* AQUILA B23 */ 446 >; 447 }; 448 449 /* Aquila ETH_2_XGMII_MDIO */ 450 pinctrl_main_mdio1: main-mdio1-default-pins { 451 pinctrl-single,pins = < 452 J784S4_IOPAD(0x058, PIN_OUTPUT, 4) /* (AE37) MCASP2_AFSX.MDIO1_MDC */ /* AQUILA B90 */ 453 J784S4_IOPAD(0x05c, PIN_INPUT, 4) /* (AC36) MCASP2_AXR0.MDIO1_MDIO */ /* AQUILA B89 */ 454 >; 455 }; 456 457 /* Aquila SD_1 */ 458 pinctrl_main_mmc1: main-mmc1-default-pins { 459 pinctrl-single,pins = < 460 J784S4_IOPAD(0x104, PIN_INPUT, 0) /* (AB38) MMC1_CLK */ /* AQUILA A5 */ 461 J784S4_IOPAD(0x108, PIN_INPUT, 0) /* (AB36) MMC1_CMD */ /* AQUILA A7 */ 462 J784S4_IOPAD(0x100, PIN_INPUT, 0) /* (No Pin) MMC1_CLKLB */ 463 J784S4_IOPAD(0x0fc, PIN_INPUT, 0) /* (AA33) MMC1_DAT0 */ /* AQUILA A3 */ 464 J784S4_IOPAD(0x0f8, PIN_INPUT, 0) /* (AB34) MMC1_DAT1 */ /* AQUILA A2 */ 465 J784S4_IOPAD(0x0f4, PIN_INPUT, 0) /* (AA32) MMC1_DAT2 */ /* AQUILA A10 */ 466 J784S4_IOPAD(0x0f0, PIN_INPUT, 0) /* (AC38) MMC1_DAT3 */ /* AQUILA A8 */ 467 >; 468 }; 469 470 /* Aquila SPI_2 */ 471 pinctrl_main_spi0: main-spi0-default-pins { 472 pinctrl-single,pins = < 473 J784S4_IOPAD(0x0d4, PIN_OUTPUT, 0) /* (AN38) SPI0_CLK */ /* AQUILA D14 */ 474 J784S4_IOPAD(0x0d8, PIN_INPUT, 0) /* (AM35) SPI0_D0 */ /* AQUILA D15 */ 475 J784S4_IOPAD(0x0dc, PIN_OUTPUT, 0) /* (AM36) SPI0_D1 */ /* AQUILA D17 */ 476 >; 477 }; 478 479 /* Aquila SPI_2 CS */ 480 pinctrl_main_spi0_cs0: main-spi0-cs0-default-pins { 481 pinctrl-single,pins = < 482 J784S4_IOPAD(0x0cc, PIN_OUTPUT, 7) /* (AM37) SPI0_CS0.GPIO0_51 */ /* AQUILA D16 */ 483 >; 484 }; 485 486 /* Aquila SPI_1 */ 487 pinctrl_main_spi2: main-spi2-default-pins { 488 pinctrl-single,pins = < 489 J784S4_IOPAD(0x0a0, PIN_OUTPUT, 10) /* (AD34) MCASP0_AXR12.SPI2_CLK */ /* AQUILA D12 */ 490 J784S4_IOPAD(0x0a8, PIN_INPUT, 10) /* (AF34) MCASP0_AXR14.SPI2_D0 */ /* AQUILA D10 */ 491 J784S4_IOPAD(0x0ac, PIN_OUTPUT, 10) /* (AE34) MCASP0_AXR15.SPI2_D1 */ /* AQUILA D11 */ 492 >; 493 }; 494 495 /* Aquila SPI_1 CS */ 496 pinctrl_main_spi2_cs0: main-spi2-cs0-default-pins { 497 pinctrl-single,pins = < 498 J784S4_IOPAD(0x09c, PIN_OUTPUT, 7) /* (AF35) MCASP0_AXR11.GPIO0_39 */ /* AQUILA D9 */ 499 >; 500 }; 501 502 /* Aquila UART_1 */ 503 pinctrl_main_uart4: main-uart4-default-pins { 504 pinctrl-single,pins = < 505 J784S4_IOPAD(0x094, PIN_INPUT, 11) /* (AG35) MCASP0_AXR9.UART4_CTSn */ /* AQUILA B36 */ 506 J784S4_IOPAD(0x098, PIN_OUTPUT, 11) /* (AH36) MCASP0_AXR10.UART4_RTSn */ /* AQUILA B38 */ 507 J784S4_IOPAD(0x08c, PIN_INPUT, 11) /* (AE35) MCASP0_AXR7.UART4_RXD */ /* AQUILA B35 */ 508 J784S4_IOPAD(0x090, PIN_OUTPUT, 11) /* (AC35) MCASP0_AXR8.UART4_TXD */ /* AQUILA B37 */ 509 >; 510 }; 511 512 /* Aquila UART_3, used as the Linux console */ 513 pinctrl_main_uart8: main-uart8-default-pins { 514 pinctrl-single,pins = < 515 J784S4_IOPAD(0x038, PIN_INPUT, 11) /* (AK35) MCASP0_ACLKX.UART8_RXD */ /* AQUILA D19 */ 516 J784S4_IOPAD(0x03c, PIN_OUTPUT, 11) /* (AK38) MCASP0_AFSX.UART8_TXD */ /* AQUILA D20 */ 517 >; 518 }; 519}; 520 521&wkup_pmx0 { 522 /* Aquila QSPI_1 (4-bit) */ 523 pinctrl_mcu_ospi0_4bit: mcu-ospi0-4bit-default-pins { 524 pinctrl-single,pins = < 525 J784S4_WKUP_IOPAD(0x000, PIN_OUTPUT, 0) /* (E32) MCU_OSPI0_CLK */ /* AQUILA B65 */ 526 J784S4_WKUP_IOPAD(0x00c, PIN_INPUT, 0) /* (B33) MCU_OSPI0_D0 */ /* AQUILA B68 */ 527 J784S4_WKUP_IOPAD(0x010, PIN_INPUT, 0) /* (B32) MCU_OSPI0_D1 */ /* AQUILA B67 */ 528 J784S4_WKUP_IOPAD(0x014, PIN_INPUT, 0) /* (C33) MCU_OSPI0_D2 */ /* AQUILA B61 */ 529 J784S4_WKUP_IOPAD(0x018, PIN_INPUT, 0) /* (C35) MCU_OSPI0_D3 */ /* AQUILA B60 */ 530 J784S4_WKUP_IOPAD(0x008, PIN_INPUT, 0) /* (C34) MCU_OSPI0_DQS */ /* AQUILA B63 */ 531 >; 532 }; 533 534 /* Aquila QSPI_1 (8-bit) */ 535 pinctrl_mcu_ospi0_8bit: mcu-ospi0-8bit-default-pins { 536 pinctrl-single,pins = < 537 J784S4_WKUP_IOPAD(0x000, PIN_OUTPUT, 0) /* (E32) MCU_OSPI0_CLK */ /* AQUILA B65 */ 538 J784S4_WKUP_IOPAD(0x00c, PIN_INPUT, 0) /* (B33) MCU_OSPI0_D0 */ /* AQUILA B68 */ 539 J784S4_WKUP_IOPAD(0x010, PIN_INPUT, 0) /* (B32) MCU_OSPI0_D1 */ /* AQUILA B67 */ 540 J784S4_WKUP_IOPAD(0x014, PIN_INPUT, 0) /* (C33) MCU_OSPI0_D2 */ /* AQUILA B61 */ 541 J784S4_WKUP_IOPAD(0x018, PIN_INPUT, 0) /* (C35) MCU_OSPI0_D3 */ /* AQUILA B60 */ 542 J784S4_WKUP_IOPAD(0x01c, PIN_INPUT, 0) /* (D33) MCU_OSPI0_D4 */ /* AQUILA B70 */ 543 J784S4_WKUP_IOPAD(0x020, PIN_INPUT, 0) /* (D34) MCU_OSPI0_D5 */ /* AQUILA B71 */ 544 J784S4_WKUP_IOPAD(0x024, PIN_INPUT, 0) /* (E34) MCU_OSPI0_D6 */ /* AQUILA B72 */ 545 J784S4_WKUP_IOPAD(0x028, PIN_INPUT, 0) /* (E33) MCU_OSPI0_D7 */ /* AQUILA B73 */ 546 J784S4_WKUP_IOPAD(0x008, PIN_INPUT, 0) /* (C34) MCU_OSPI0_DQS */ /* AQUILA B63 */ 547 >; 548 }; 549 550 /* Aquila QSPI_1_CS1# */ 551 pinctrl_mcu_ospi0_cs0: mcu-ospi0-cs0-default-pins { 552 pinctrl-single,pins = < 553 J784S4_WKUP_IOPAD(0x02c, PIN_OUTPUT, 0) /* (A32) MCU_OSPI0_CSn0 */ /* AQUILA B66 */ 554 >; 555 }; 556 557 /* Aquila QSPI_1_CS2# */ 558 pinctrl_mcu_ospi0_cs1: mcu-ospi0-cs1-default-pins { 559 pinctrl-single,pins = < 560 J784S4_WKUP_IOPAD(0x030, PIN_OUTPUT, 0) /* (A33) MCU_OSPI0_CSn1 */ /* AQUILA B62 */ 561 >; 562 }; 563 564 /* Aquila QSPI_1_SCK as GPIO */ 565 pinctrl_wkup_gpio_16: wkup-gpio0-16-default-pins { 566 pinctrl-single,pins = < 567 J784S4_WKUP_IOPAD(0x000, PIN_INPUT, 7) /* (E32) MCU_OSPI0_CLK.WKUP_GPIO0_16 */ /* AQUILA B65 */ 568 >; 569 }; 570 571 /* Aquila GPIO_04 */ 572 pinctrl_gpio_04: wkup-gpio0-17-default-pins { 573 pinctrl-single,pins = < 574 J784S4_WKUP_IOPAD(0x004, PIN_INPUT, 7) /* (D32) MCU_OSPI0_LBCLKO.WKUP_GPIO0_17 */ /* AQUILA C20 */ 575 >; 576 }; 577 578 /* Aquila QSPI_1_DQS as GPIO */ 579 pinctrl_wkup_gpio_18: wkup-gpio0-18-default-pins { 580 pinctrl-single,pins = < 581 J784S4_WKUP_IOPAD(0x008, PIN_INPUT, 7) /* (C34) MCU_OSPI0_DQS.WKUP_GPIO0_18 */ /* AQUILA B63 */ 582 >; 583 }; 584 585 /* Aquila QSPI_1_IO0 as GPIO */ 586 pinctrl_wkup_gpio_19: wkup-gpio0-19-default-pins { 587 pinctrl-single,pins = < 588 J784S4_WKUP_IOPAD(0x00c, PIN_INPUT, 7) /* (B33) MCU_OSPI0_D0.WKUP_GPIO0_19 */ /* AQUILA B68 */ 589 >; 590 }; 591 592 /* Aquila QSPI_1_IO1 as GPIO */ 593 pinctrl_wkup_gpio_20: wkup-gpio0-20-default-pins { 594 pinctrl-single,pins = < 595 J784S4_WKUP_IOPAD(0x010, PIN_INPUT, 7) /* (B32) MCU_OSPI0_D1.WKUP_GPIO0_20 */ /* AQUILA B67 */ 596 >; 597 }; 598 599 /* Aquila QSPI_1_IO2 as GPIO */ 600 pinctrl_wkup_gpio_21: wkup-gpio0-21-default-pins { 601 pinctrl-single,pins = < 602 J784S4_WKUP_IOPAD(0x014, PIN_INPUT, 7) /* (C33) MCU_OSPI0_D2.WKUP_GPIO0_21 */ /* AQUILA B61 */ 603 >; 604 }; 605 606 /* Aquila QSPI_1_IO3 as GPIO */ 607 pinctrl_wkup_gpio_22: wkup-gpio0-22-default-pins { 608 pinctrl-single,pins = < 609 J784S4_WKUP_IOPAD(0x018, PIN_INPUT, 7) /* (C35) MCU_OSPI0_D3.WKUP_GPIO0_22 */ /* AQUILA B60 */ 610 >; 611 }; 612 613 /* Aquila QSPI_1_IO4 as GPIO */ 614 pinctrl_wkup_gpio_23: wkup-gpio0-23-default-pins { 615 pinctrl-single,pins = < 616 J784S4_WKUP_IOPAD(0x01c, PIN_INPUT, 7) /* (D33) MCU_OSPI0_D4.WKUP_GPIO0_23 */ /* AQUILA B70 */ 617 >; 618 }; 619 620 /* Aquila QSPI_1_IO5 as GPIO */ 621 pinctrl_wkup_gpio_24: wkup-gpio0-24-default-pins { 622 pinctrl-single,pins = < 623 J784S4_WKUP_IOPAD(0x020, PIN_INPUT, 7) /* (D34) MCU_OSPI0_D5.WKUP_GPIO0_24 */ /* AQUILA B71 */ 624 >; 625 }; 626 627 /* Aquila QSPI_1_IO6 as GPIO */ 628 pinctrl_wkup_gpio_25: wkup-gpio0-25-default-pins { 629 pinctrl-single,pins = < 630 J784S4_WKUP_IOPAD(0x024, PIN_INPUT, 7) /* (E34) MCU_OSPI0_D6.WKUP_GPIO0_25 */ /* AQUILA B72 */ 631 >; 632 }; 633 634 /* Aquila QSPI_1_IO7 as GPIO */ 635 pinctrl_wkup_gpio_26: wkup-gpio0-26-default-pins { 636 pinctrl-single,pins = < 637 J784S4_WKUP_IOPAD(0x028, PIN_INPUT, 7) /* (E33) MCU_OSPI0_D7.WKUP_GPIO0_26 */ /* AQUILA B73 */ 638 >; 639 }; 640 641 /* Aquila QSPI_1_CS#1 as GPIO */ 642 pinctrl_wkup_gpio_27: wkup-gpio0-27-default-pins { 643 pinctrl-single,pins = < 644 J784S4_WKUP_IOPAD(0x02c, PIN_INPUT, 7) /* (A32) MCU_OSPI0_CSn0.WKUP_GPIO0_27 */ /* AQUILA B66 */ 645 >; 646 }; 647 648 /* Aquila QSPI_1_CS#2 as GPIO */ 649 pinctrl_wkup_gpio_28: wkup-gpio0-28-default-pins { 650 pinctrl-single,pins = < 651 J784S4_WKUP_IOPAD(0x030, PIN_INPUT, 7) /* (A33) MCU_OSPI0_CSn1.WKUP_GPIO0_28 */ /* AQUILA B62 */ 652 >; 653 }; 654}; 655 656&wkup_pmx1 { 657 /* Aquila UART_4 (RXD) */ 658 pinctrl_mcu_uart0_rx: mcu-uart0-rx-default-pins { 659 pinctrl-single,pins = < 660 J784S4_WKUP_IOPAD(0x018, PIN_INPUT, 4) /* (D31) MCU_OSPI1_D1.MCU_UART0_RXD */ /* AQUILA D21 */ 661 >; 662 }; 663 664 /* Aquila GPIO_05 */ 665 pinctrl_gpio_05: wkup-gpio0-29-default-pins { 666 pinctrl-single,pins = < 667 J784S4_WKUP_IOPAD(0x000, PIN_INPUT, 7) /* (B34) MCU_OSPI0_CSn2.WKUP_GPIO0_29 */ /* AQUILA C21 */ 668 >; 669 }; 670 671 /* Aquila GPIO_06 */ 672 pinctrl_gpio_06: wkup-gpio0-30-default-pins { 673 pinctrl-single,pins = < 674 J784S4_WKUP_IOPAD(0x004, PIN_INPUT, 7) /* (C32) MCU_OSPI0_CSn3.WKUP_GPIO0_30 */ /* AQUILA C22 */ 675 >; 676 }; 677 678 /* Aquila GPIO_07 */ 679 pinctrl_gpio_07: wkup-gpio0-31-default-pins { 680 pinctrl-single,pins = < 681 J784S4_WKUP_IOPAD(0x008, PIN_INPUT, 7) /* (F32) MCU_OSPI1_CLK.WKUP_GPIO0_31 */ /* AQUILA C23 */ 682 >; 683 }; 684 685 /* Aquila GPIO_13_CSI_2 */ 686 pinctrl_gpio_13_csi_2: wkup-gpio0-32-default-pins { 687 pinctrl-single,pins = < 688 J784S4_WKUP_IOPAD(0x00c, PIN_INPUT, 7) /* (C31) MCU_OSPI1_LBCLKO.WKUP_GPIO0_32 */ /* AQUILA C1 */ 689 >; 690 }; 691 692 /* Aquila GPIO_14_CSI_2 */ 693 pinctrl_gpio_14_csi_2: wkup-gpio0-33-default-pins { 694 pinctrl-single,pins = < 695 J784S4_WKUP_IOPAD(0x010, PIN_INPUT, 7) /* (F31) MCU_OSPI1_DQS.WKUP_GPIO0_33 */ /* AQUILA C2 */ 696 >; 697 }; 698 699 /* RTC_IRQ# */ 700 pinctrl_rtc_irq: wkup-gpio0-34-default-pins { 701 pinctrl-single,pins = < 702 J784S4_WKUP_IOPAD(0x014, PIN_INPUT, 7) /* (E35) MCU_OSPI1_D0.WKUP_GPIO0_34 */ 703 >; 704 }; 705 706 /* Aquila CTRL_PWR_BTN_MICO# (PWR_BTN_INT#) */ 707 pinctrl_pwr_btn_int: wkup-gpio0-36-default-pins { 708 pinctrl-single,pins = < 709 J784S4_WKUP_IOPAD(0x01c, PIN_INPUT_PULLUP, 7) /* (G31) MCU_OSPI1_D2.WKUP_GPIO0_36 */ /* AQUILA B92 */ 710 >; 711 }; 712 713 /* Aquila GPIO_15_CSI_2 */ 714 pinctrl_gpio_15_csi_2: wkup-gpio0-37-default-pins { 715 pinctrl-single,pins = < 716 J784S4_WKUP_IOPAD(0x020, PIN_INPUT, 7) /* (F33) MCU_OSPI1_D3.WKUP_GPIO0_37 */ /* AQUILA C3 */ 717 >; 718 }; 719 720 /* Aquila GPIO_08 */ 721 pinctrl_gpio_08: wkup-gpio0-38-default-pins { 722 pinctrl-single,pins = < 723 J784S4_WKUP_IOPAD(0x024, PIN_INPUT, 7) /* (G32) MCU_OSPI1_CSn0.WKUP_GPIO0_38 */ /* AQUILA C24 */ 724 >; 725 }; 726 727 /* Aquila GPIO_16_CSI_2 */ 728 pinctrl_gpio_16_csi_2: wkup-gpio0-39-default-pins { 729 pinctrl-single,pins = < 730 J784S4_WKUP_IOPAD(0x028, PIN_INPUT, 7) /* (G33) MCU_OSPI1_CSn1.WKUP_GPIO0_39 */ /* AQUILA C4 */ 731 >; 732 }; 733}; 734 735&wkup_pmx2 { 736 /* Aquila ADC_[1-4] */ 737 pinctrl_mcu_adc0: mcu-adc0-default-pins { 738 pinctrl-single,pins = < 739 J784S4_WKUP_IOPAD(0x0cc, PIN_OUTPUT, 0) /* (P36) MCU_ADC0_AIN0 */ /* AQUILA D1 */ 740 J784S4_WKUP_IOPAD(0x0d0, PIN_OUTPUT, 0) /* (V36) MCU_ADC0_AIN1 */ /* AQUILA D2 */ 741 J784S4_WKUP_IOPAD(0x0d4, PIN_OUTPUT, 0) /* (T34) MCU_ADC0_AIN2 */ /* AQUILA D3 */ 742 J784S4_WKUP_IOPAD(0x0d8, PIN_OUTPUT, 0) /* (T36) MCU_ADC0_AIN3 */ /* AQUILA D4 */ 743 >; 744 }; 745 746 /* Aquila CTRL_MCLK_MOCI */ 747 pinctrl_mcu_clkout0: mcu-clkout0-default-pins { 748 pinctrl-single,pins = < 749 J784S4_WKUP_IOPAD(0x084, PIN_OUTPUT, 6) /* (M38) WKUP_GPIO0_11.MCU_CLKOUT0 */ /* AQUILA A14 */ 750 >; 751 }; 752 753 /* Aquila I2C_1 */ 754 pinctrl_mcu_i2c0: mcu-i2c0-default-pins { 755 pinctrl-single,pins = < 756 J784S4_WKUP_IOPAD(0x0a0, PIN_INPUT, 0) /* (M35) MCU_I2C0_SCL */ /* AQUILA D8 */ 757 J784S4_WKUP_IOPAD(0x0a4, PIN_INPUT, 0) /* (G34) MCU_I2C0_SDA */ /* AQUILA D7 */ 758 >; 759 }; 760 761 /* Aquila I2C_2 */ 762 pinctrl_mcu_i2c1: mcu-i2c1-default-pins { 763 pinctrl-single,pins = < 764 J784S4_WKUP_IOPAD(0x078, PIN_INPUT_PULLUP, 0) /* (L35) WKUP_GPIO0_8.MCU_I2C1_SCL */ /* AQUILA C17 */ 765 J784S4_WKUP_IOPAD(0x07c, PIN_INPUT_PULLUP, 0) /* (L34) WKUP_GPIO0_9.MCU_I2C1_SDA */ /* AQUILA C16 */ 766 >; 767 }; 768 769 /* Aquila CAN_2 */ 770 pinctrl_mcu_mcan0: mcu-mcan0-default-pins { 771 pinctrl-single,pins = < 772 J784S4_WKUP_IOPAD(0x054, PIN_INPUT, 0) /* (F38) MCU_MCAN0_RX */ /* AQUILA B51 */ 773 J784S4_WKUP_IOPAD(0x050, PIN_OUTPUT, 0) /* (K33) MCU_MCAN0_TX */ /* AQUILA B50 */ 774 >; 775 }; 776 777 /* Aquila CAN_4 */ 778 pinctrl_mcu_mcan1: mcu-mcan1-default-pins { 779 pinctrl-single,pins = < 780 J784S4_WKUP_IOPAD(0x06c, PIN_INPUT, 0) /* (K36) WKUP_GPIO0_5.MCU_MCAN1_RX */ /* AQUILA B56 */ 781 J784S4_WKUP_IOPAD(0x068, PIN_OUTPUT, 0) /* (H35) WKUP_GPIO0_4.MCU_MCAN1_TX */ /* AQUILA B55 */ 782 >; 783 }; 784 785 /* On-module ETH_1 MDIO */ 786 pinctrl_mcu_mdio: mcu-mdio-default-pins { 787 pinctrl-single,pins = < 788 J784S4_WKUP_IOPAD(0x034, PIN_OUTPUT, 0) /* (A36) MCU_MDIO0_MDC */ 789 J784S4_WKUP_IOPAD(0x030, PIN_INPUT, 0) /* (B35) MCU_MDIO0_MDIO */ 790 >; 791 }; 792 793 /* On-module ETH_1 RGMII */ 794 pinctrl_mcu_rgmii1: mcu-rgmii1-default-pins { 795 pinctrl-single,pins = < 796 J784S4_WKUP_IOPAD(0x02c, PIN_INPUT, 0) /* (A35) MCU_RGMII1_RD0 */ 797 J784S4_WKUP_IOPAD(0x028, PIN_INPUT, 0) /* (B36) MCU_RGMII1_RD1 */ 798 J784S4_WKUP_IOPAD(0x024, PIN_INPUT, 0) /* (C36) MCU_RGMII1_RD2 */ 799 J784S4_WKUP_IOPAD(0x020, PIN_INPUT, 0) /* (D36) MCU_RGMII1_RD3 */ 800 J784S4_WKUP_IOPAD(0x01c, PIN_INPUT, 0) /* (B37) MCU_RGMII1_RXC */ 801 J784S4_WKUP_IOPAD(0x004, PIN_INPUT, 0) /* (C37) MCU_RGMII1_RX_CTL */ 802 J784S4_WKUP_IOPAD(0x014, PIN_OUTPUT, 0) /* (D37) MCU_RGMII1_TD0 */ 803 J784S4_WKUP_IOPAD(0x010, PIN_OUTPUT, 0) /* (D38) MCU_RGMII1_TD1 */ 804 J784S4_WKUP_IOPAD(0x00c, PIN_OUTPUT, 0) /* (E37) MCU_RGMII1_TD2 */ 805 J784S4_WKUP_IOPAD(0x008, PIN_OUTPUT, 0) /* (E38) MCU_RGMII1_TD3 */ 806 J784S4_WKUP_IOPAD(0x018, PIN_OUTPUT, 0) /* (E36) MCU_RGMII1_TXC */ 807 J784S4_WKUP_IOPAD(0x000, PIN_OUTPUT, 0) /* (C38) MCU_RGMII1_TX_CTL */ 808 >; 809 }; 810 811 /* On-module SPI (TPM_SPI) */ 812 pinctrl_mcu_spi0: mcu-spi0-default-pins { 813 pinctrl-single,pins = < 814 J784S4_WKUP_IOPAD(0x038, PIN_OUTPUT, 0) /* (G38) MCU_SPI0_CLK */ 815 J784S4_WKUP_IOPAD(0x044, PIN_OUTPUT, 0) /* (F37) MCU_SPI0_CS0 */ 816 J784S4_WKUP_IOPAD(0x03c, PIN_INPUT, 0) /* (H36) MCU_SPI0_D0 */ 817 J784S4_WKUP_IOPAD(0x040, PIN_OUTPUT, 0) /* (J38) MCU_SPI0_D1 */ 818 >; 819 }; 820 821 /* Aquila UART_4 (TX) */ 822 pinctrl_mcu_uart0_tx: mcu-uart0-tx-default-pins { 823 pinctrl-single,pins = < 824 J784S4_WKUP_IOPAD(0x080, PIN_OUTPUT, 2) /* (L33) WKUP_GPIO0_10.MCU_UART0_TXD */ /* AQUILA D22 */ 825 >; 826 }; 827 828 /* On-module Wi-Fi Power Enable */ 829 pinctrl_en_3v3_wifi: wkup-gpio0-57-default-pins { 830 pinctrl-single,pins = < 831 J784S4_WKUP_IOPAD(0x114, PIN_INPUT, 7) /* (M36) WKUP_GPIO0_57 */ 832 >; 833 }; 834 835 /* On-module TPM IRQ# */ 836 pinctrl_tpm_irq: wkup-gpio0-81-default-pins { 837 pinctrl-single,pins = < 838 J784S4_WKUP_IOPAD(0x0f4, PIN_INPUT, 7) /* (V34) MCU_ADC1_AIN2.WKUP_GPIO0_81 */ 839 >; 840 }; 841 842 /* On-module I2C - WKUP_I2C0 */ 843 pinctrl_wkup_i2c0: wkup-i2c0-default-pins { 844 pinctrl-single,pins = < 845 J784S4_WKUP_IOPAD(0x098, PIN_INPUT, 0) /* (N33) WKUP_I2C0_SCL */ 846 J784S4_WKUP_IOPAD(0x09c, PIN_INPUT, 0) /* (N35) WKUP_I2C0_SDA */ 847 >; 848 }; 849 850 /* Aquila UART_2 */ 851 pinctrl_wkup_uart0: wkup-uart0-default-pins { 852 pinctrl-single,pins = < 853 J784S4_WKUP_IOPAD(0x070, PIN_INPUT, 0) /* (L37) WKUP_GPIO0_6.WKUP_UART0_CTSn */ /* AQUILA B32 */ 854 J784S4_WKUP_IOPAD(0x074, PIN_OUTPUT, 0) /* (L36) WKUP_GPIO0_7.WKUP_UART0_RTSn */ /* AQUILA B34 */ 855 J784S4_WKUP_IOPAD(0x048, PIN_INPUT, 0) /* (K35) WKUP_UART0_RXD */ /* AQUILA B31 */ 856 J784S4_WKUP_IOPAD(0x04c, PIN_OUTPUT, 0) /* (K34) WKUP_UART0_TXD */ /* AQUILA B33 */ 857 >; 858 }; 859}; 860 861&wkup_pmx3 { 862 /* Aquila CTRL_WAKE1_MICO# */ 863 pinctrl_ctrl_wake1_mico: wkup-gpio0-49-default-pins { 864 pinctrl-single,pins = < 865 J784S4_WKUP_IOPAD(0x000, PIN_INPUT_PULLUP, 7) /* (M33) WKUP_GPIO0_49 */ /* AQUILA D6 */ 866 >; 867 }; 868}; 869 870/* Aquila I2S_1_MCLK */ 871&audio_refclk1 { 872 assigned-clock-rates = <24576000>; 873}; 874 875/* On-module ETH_1 MDIO */ 876&davinci_mdio { 877 pinctrl-names = "default"; 878 pinctrl-0 = <&pinctrl_mcu_mdio>; 879 status = "disabled"; 880 881 mcu_phy0: ethernet-phy@0 { 882 reg = <0>; 883 interrupt-parent = <&wkup_gpio0>; 884 interrupts = <79 IRQ_TYPE_EDGE_FALLING>; 885 ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; 886 ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; 887 }; 888}; 889 890&dss { 891 assigned-clocks = <&k3_clks 218 2>, 892 <&k3_clks 218 5>; 893 assigned-clock-parents = <&k3_clks 218 3>, 894 <&k3_clks 218 7>; 895 status = "disabled"; 896}; 897 898&dss_ports { 899 #address-cells = <1>; 900 #size-cells = <0>; 901 902 port@0 { 903 reg = <0>; 904 dpi0_out: endpoint { 905 remote-endpoint = <&dp0_in>; 906 }; 907 }; 908}; 909 910&dp0_ports { 911 #address-cells = <1>; 912 #size-cells = <0>; 913 914 port@0 { 915 reg = <0>; 916 dp0_in: endpoint { 917 remote-endpoint = <&dpi0_out>; 918 }; 919 }; 920}; 921 922&main0_crit { 923 temperature = <105000>; 924}; 925 926&main0_thermal { 927 trips { 928 main0_alert0: trip-point0 { 929 temperature = <70000>; 930 hysteresis = <2000>; 931 type = "active"; 932 }; 933 934 main0_alert1: trip-point1 { 935 temperature = <85000>; 936 hysteresis = <2000>; 937 type = "active"; 938 }; 939 }; 940}; 941 942&main1_crit { 943 temperature = <105000>; 944}; 945 946&main1_thermal { 947 trips { 948 main1_alert0: trip-point0 { 949 temperature = <70000>; 950 hysteresis = <2000>; 951 type = "active"; 952 }; 953 954 main1_alert1: trip-point1 { 955 temperature = <85000>; 956 hysteresis = <2000>; 957 type = "active"; 958 }; 959 }; 960}; 961 962&main2_crit { 963 temperature = <105000>; 964}; 965 966&main2_thermal { 967 trips { 968 main2_alert0: trip-point0 { 969 temperature = <70000>; 970 hysteresis = <2000>; 971 type = "active"; 972 }; 973 974 main2_alert1: trip-point1 { 975 temperature = <85000>; 976 hysteresis = <2000>; 977 type = "active"; 978 }; 979 }; 980}; 981 982&main3_crit { 983 temperature = <105000>; 984}; 985 986&main3_thermal { 987 trips { 988 main3_alert0: trip-point0 { 989 temperature = <70000>; 990 hysteresis = <2000>; 991 type = "active"; 992 }; 993 994 main3_alert1: trip-point1 { 995 temperature = <85000>; 996 hysteresis = <2000>; 997 type = "active"; 998 }; 999 }; 1000}; 1001 1002&main4_crit { 1003 temperature = <105000>; 1004}; 1005 1006&main4_thermal { 1007 trips { 1008 main4_alert0: trip-point0 { 1009 temperature = <70000>; 1010 hysteresis = <2000>; 1011 type = "active"; 1012 }; 1013 1014 main4_alert1: trip-point1 { 1015 temperature = <85000>; 1016 hysteresis = <2000>; 1017 type = "active"; 1018 }; 1019 }; 1020}; 1021 1022/* Aquila ETH_2 SGMII PHY */ 1023&main_cpsw0_port8 { 1024 phy-mode = "sgmii"; 1025 phys = <&cpsw0_phy_gmii_sel 8>, <&serdes2_sgmii_link>; 1026 phy-names = "mac", "serdes"; 1027 status = "disabled"; 1028}; 1029 1030/* Aquila ETH_2_XGMII_MDIO */ 1031&main_cpsw0_mdio { 1032 pinctrl-names = "default"; 1033 pinctrl-0 = <&pinctrl_main_mdio1>; 1034}; 1035 1036/* Aquila PWM_1 */ 1037&main_ehrpwm0 { 1038 pinctrl-names = "default"; 1039 pinctrl-0 = <&pinctrl_main_ehrpwm0_b>; 1040 status = "disabled"; 1041}; 1042 1043/* Aquila PWM_2 */ 1044&main_ehrpwm1 { 1045 pinctrl-names = "default"; 1046 pinctrl-0 = <&pinctrl_main_ehrpwm1_a>; 1047 status = "disabled"; 1048}; 1049 1050/* Aquila PWM_4_DP */ 1051&main_ehrpwm2 { 1052 pinctrl-names = "default"; 1053 pinctrl-0 = <&pinctrl_main_ehrpwm2_a>; 1054 status = "disabled"; 1055}; 1056 1057/* Aquila PWM_3_DSI */ 1058&main_ehrpwm5 { 1059 pinctrl-names = "default"; 1060 pinctrl-0 = <&pinctrl_main_ehrpwm5_a>; 1061 status = "disabled"; 1062}; 1063 1064&main_gpio0 { 1065 gpio-line-names = 1066 "", /* 0 */ 1067 "AQUILA_B17", 1068 "AQUILA_B18", 1069 "AQUILA_B53", 1070 "AQUILA_B54", 1071 "AQUILA_B59", 1072 "AQUILA_C18", 1073 "AQUILA_C19", 1074 "AQUILA_A13", 1075 "AQUILA_A12", 1076 "AQUILA_B75", /* 10 */ 1077 "AQUILA_B77", 1078 "AQUILA_B42", 1079 "AQUILA_B44", 1080 "AQUILA_D19", 1081 "AQUILA_D20", 1082 "AQUILA_B58", 1083 "AQUILA_D24", 1084 "AQUILA_B45", 1085 "AQUILA_C06", 1086 "AQUILA_C05", /* 20 */ 1087 "AQUILA_B57", 1088 "AQUILA_B90", 1089 "AQUILA_B89", 1090 "AQUILA_C26", 1091 "AQUILA_C25", 1092 "AQUILA_B22", 1093 "AQUILA_B21", 1094 "AQUILA_B74", 1095 "AQUILA_D25", 1096 "AQUILA_B24", /* 30 */ 1097 "AQUILA_B43", 1098 "AQUILA_C38", 1099 "AQUILA_B46", 1100 "AQUILA_D23", 1101 "AQUILA_B35", 1102 "AQUILA_B37", 1103 "AQUILA_B36", 1104 "AQUILA_B38", 1105 "AQUILA_D09", 1106 "AQUILA_D12", /* 40 */ 1107 "AQUILA_C35", 1108 "AQUILA_D10", 1109 "AQUILA_D11", 1110 "AQUILA_B81", 1111 "AQUILA_B48", 1112 "AQUILA_B49", 1113 "AQUILA_A11", 1114 "AQUILA_B19", 1115 "AQUILA_B23", 1116 "AQUILA_B20", /* 50 */ 1117 "AQUILA_D16", 1118 "AQUILA_A06", 1119 "AQUILA_D14", 1120 "AQUILA_D15", 1121 "AQUILA_D17", 1122 "AQUILA_B41", 1123 "AQUILA_B40", 1124 "AQUILA_A01", 1125 "", 1126 "AQUILA_A08", /* 60 */ 1127 "AQUILA_A10", 1128 "AQUILA_A02", 1129 "AQUILA_A03", 1130 "AQUILA_A05", 1131 "AQUILA_A07"; 1132 1133 status = "okay"; 1134}; 1135 1136/* Aquila I2C_3_DSI1 */ 1137&main_i2c0 { 1138 pinctrl-names = "default"; 1139 pinctrl-0 = <&pinctrl_main_i2c0>; 1140 clock-frequency = <100000>; 1141 status = "disabled"; 1142}; 1143 1144/* Aquila I2C_4_CSI1 */ 1145&main_i2c1 { 1146 pinctrl-names = "default"; 1147 pinctrl-0 = <&pinctrl_main_i2c1>; 1148 clock-frequency = <400000>; 1149 status = "disabled"; 1150}; 1151 1152/* Aquila I2C_5_CSI2 */ 1153&main_i2c2 { 1154 pinctrl-names = "default"; 1155 pinctrl-0 = <&pinctrl_main_i2c2>; 1156 clock-frequency = <400000>; 1157 status = "disabled"; 1158}; 1159 1160/* Aquila I2C_6 */ 1161&main_i2c5 { 1162 pinctrl-names = "default"; 1163 pinctrl-0 = <&pinctrl_main_i2c5>; 1164 clock-frequency = <400000>; 1165 status = "disabled"; 1166}; 1167 1168/* Aquila CAN_1 */ 1169&main_mcan10 { 1170 pinctrl-names = "default"; 1171 pinctrl-0 = <&pinctrl_main_mcan10>; 1172 status = "disabled"; 1173}; 1174 1175/* Aquila CAN_3 */ 1176&main_mcan13 { 1177 pinctrl-names = "default"; 1178 pinctrl-0 = <&pinctrl_main_mcan13>; 1179 status = "disabled"; 1180}; 1181 1182/* On-module eMMC */ 1183&main_sdhci0 { 1184 disable-wp; 1185 non-removable; 1186 ti,driver-strength-ohm = <50>; 1187 status = "okay"; 1188}; 1189 1190/* Aquila SD_1 */ 1191&main_sdhci1 { 1192 pinctrl-names = "default"; 1193 pinctrl-0 = <&pinctrl_main_mmc1>, <&pinctrl_sd1_cd_gpio>; 1194 cd-gpios = <&main_gpio0 58 GPIO_ACTIVE_LOW>; 1195 disable-wp; 1196 vmmc-supply = <®_sdhc1_vmmc>; 1197 vqmmc-supply = <®_sdhc1_vqmmc>; 1198 ti,driver-strength-ohm = <50>; 1199 ti,fails-without-test-cd; 1200 status = "disabled"; 1201}; 1202 1203/* Aquila SPI_2 */ 1204&main_spi0 { 1205 pinctrl-names = "default"; 1206 pinctrl-0 = <&pinctrl_main_spi0>, <&pinctrl_main_spi0_cs0>; 1207 cs-gpios = <&main_gpio0 51 GPIO_ACTIVE_LOW>; 1208 status = "disabled"; 1209}; 1210 1211/* Aquila SPI_1 */ 1212&main_spi2 { 1213 pinctrl-names = "default"; 1214 pinctrl-0 = <&pinctrl_main_spi2>, <&pinctrl_main_spi2_cs0>; 1215 cs-gpios = <&main_gpio0 39 GPIO_ACTIVE_LOW>; 1216 status = "disabled"; 1217}; 1218 1219/* Aquila UART_1 */ 1220&main_uart4 { 1221 pinctrl-names = "default"; 1222 pinctrl-0 = <&pinctrl_main_uart4>; 1223 status = "disabled"; 1224}; 1225 1226/* Aquila UART_3, used as the Linux console */ 1227&main_uart8 { 1228 pinctrl-names = "default"; 1229 pinctrl-0 = <&pinctrl_main_uart8>; 1230 status = "disabled"; 1231}; 1232 1233/* Aquila I2S_1 */ 1234&mcasp4 { 1235 pinctrl-names = "default"; 1236 pinctrl-0 = <&pinctrl_main_mcasp4>; 1237 op-mode = <0>; /* MCASP_I2S_MODE */ 1238 serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */ 1239 0 1 2 0 1240 0 0 0 0 1241 0 0 0 0 1242 0 0 0 0 1243 >; 1244 tdm-slots = <2>; 1245 #sound-dai-cells = <0>; 1246 status = "disabled"; 1247}; 1248 1249&mcu_cpsw { 1250 pinctrl-names = "default"; 1251 pinctrl-0 = <&pinctrl_mcu_rgmii1>; 1252 status = "disabled"; 1253}; 1254 1255/* On-module ETH_1 RGMII */ 1256&mcu_cpsw_port1 { 1257 phy-handle = <&mcu_phy0>; 1258 phy-mode = "rgmii-id"; 1259 status = "disabled"; 1260}; 1261 1262/* Aquila I2C_1 */ 1263&mcu_i2c0 { 1264 pinctrl-names = "default"; 1265 pinctrl-0 = <&pinctrl_mcu_i2c0>; 1266 clock-frequency = <400000>; 1267 status = "disabled"; 1268}; 1269 1270/* Aquila I2C_2 */ 1271&mcu_i2c1 { 1272 pinctrl-names = "default"; 1273 pinctrl-0 = <&pinctrl_mcu_i2c1>; 1274 clock-frequency = <400000>; 1275 status = "disabled"; 1276}; 1277 1278/* Aquila CAN_2 */ 1279&mcu_mcan0 { 1280 pinctrl-names = "default"; 1281 pinctrl-0 = <&pinctrl_mcu_mcan0>; 1282 status = "disabled"; 1283}; 1284 1285/* Aquila CAN_4 */ 1286&mcu_mcan1 { 1287 pinctrl-names = "default"; 1288 pinctrl-0 = <&pinctrl_mcu_mcan1>; 1289 status = "disabled"; 1290}; 1291 1292/* On-module SPI (TPM_SPI) */ 1293&mcu_spi0 { 1294 pinctrl-names = "default"; 1295 pinctrl-0 = <&pinctrl_mcu_spi0>; 1296 status = "okay"; 1297 1298 tpm@0 { 1299 compatible = "st,st33htpm-spi", "tcg,tpm_tis-spi"; 1300 reg = <0>; 1301 pinctrl-names = "default"; 1302 pinctrl-0 = <&pinctrl_tpm_irq>; 1303 interrupt-parent = <&wkup_gpio0>; 1304 interrupts = <81 IRQ_TYPE_EDGE_FALLING>; 1305 spi-max-frequency = <33000000>; 1306 }; 1307}; 1308 1309/* Aquila UART_4 */ 1310&mcu_uart0 { 1311 pinctrl-names = "default"; 1312 pinctrl-0 = <&pinctrl_mcu_uart0_rx>, <&pinctrl_mcu_uart0_tx>; 1313 status = "disabled"; 1314}; 1315 1316&mhdp { 1317 pinctrl-names = "default"; 1318 pinctrl-0 = <&pinctrl_main_dp0_hpd>; 1319 phy-names = "dpphy"; 1320 phys = <&serdes4_dp0_link>; 1321 status = "disabled"; 1322}; 1323 1324/* Aquila QSPI_1 */ 1325&ospi0 { 1326 pinctrl-names = "default"; 1327 pinctrl-0 = <&pinctrl_mcu_ospi0_8bit>, <&pinctrl_mcu_ospi0_cs0>; 1328 status = "disabled"; 1329}; 1330 1331/* Aquila PCIE_1 */ 1332&pcie0_rc { 1333 pinctrl-names = "default"; 1334 pinctrl-0 = <&pinctrl_pcie0_reset>; 1335 clocks = <&k3_clks 332 0>, <&serdes1 CDNS_TORRENT_REFCLK_DRIVER>; 1336 clock-names = "fck", "pcie_refclk"; 1337 num-lanes = <2>; 1338 phy-names = "pcie-phy"; 1339 phys = <&serdes1_pcie0_2l_link>; 1340 reset-gpios = <&main_gpio0 32 GPIO_ACTIVE_HIGH>; 1341 ti,syscon-acspcie-proxy-ctrl = <&acspcie1_proxy_ctrl 0x3>; 1342 status = "disabled"; 1343}; 1344 1345/* Aquila PCIE_2 */ 1346&pcie1_rc { 1347 pinctrl-names = "default"; 1348 pinctrl-0 = <&pinctrl_pcie1_reset>; 1349 clocks = <&k3_clks 333 0>, <&serdes0 CDNS_TORRENT_REFCLK_DRIVER>; 1350 clock-names = "fck", "pcie_refclk"; 1351 num-lanes = <2>; 1352 phy-names = "pcie-phy"; 1353 phys = <&serdes0_pcie1_2l_link>; 1354 reset-gpios = <&main_gpio0 41 GPIO_ACTIVE_HIGH>; 1355 ti,syscon-acspcie-proxy-ctrl = <&acspcie0_proxy_ctrl 0x3>; 1356 status = "disabled"; 1357}; 1358 1359/* On-module PCIe USB Bridge */ 1360&pcie2_rc { 1361 clocks = <&k3_clks 334 0>, <&serdes1 CDNS_TORRENT_REFCLK_DRIVER>; 1362 clock-names = "fck", "pcie_refclk"; 1363 num-lanes = <1>; 1364 phy-names = "pcie-phy"; 1365 phys = <&serdes1_pcie2_1l_link>; 1366 reset-gpios = <&som_gpio_expander 3 GPIO_ACTIVE_HIGH>; 1367 ti,syscon-acspcie-proxy-ctrl = <&acspcie1_proxy_ctrl 0x3>; 1368 status = "okay"; 1369 1370 pci@0,0 { 1371 device_type = "pci"; 1372 reg = <0x0 0x0 0x0 0x0 0x0>; 1373 1374 #address-cells = <3>; 1375 #size-cells = <2>; 1376 ranges; 1377 1378 usb@0 { 1379 compatible = "pci104c,8241"; 1380 reg = <0x0 0x0 0x0 0x0 0x0>; 1381 ti,pwron-active-high; 1382 }; 1383 }; 1384}; 1385 1386/* PCIE for On-module Wi-Fi */ 1387&pcie3_rc { 1388 clocks = <&k3_clks 335 0>, <&serdes0 CDNS_TORRENT_REFCLK_DRIVER>; 1389 clock-names = "fck", "pcie_refclk"; 1390 num-lanes = <1>; 1391 phy-names = "pcie-phy"; 1392 phys = <&serdes0_pcie3_1l_link>; 1393 reset-gpios = <&som_gpio_expander 4 GPIO_ACTIVE_HIGH>; 1394 ti,syscon-acspcie-proxy-ctrl = <&acspcie0_proxy_ctrl 0x3>; 1395 status = "okay"; 1396}; 1397 1398&serdes0 { 1399 status = "okay"; 1400 1401 /* Aquila PCIE_2 */ 1402 serdes0_pcie1_2l_link: phy@0 { 1403 reg = <0>; 1404 #phy-cells = <0>; 1405 resets = <&serdes_wiz0 1>, <&serdes_wiz0 2>; 1406 cdns,num-lanes = <2>; 1407 cdns,phy-type = <PHY_TYPE_PCIE>; 1408 }; 1409 1410 /* On-module PCIe Wi-Fi */ 1411 serdes0_pcie3_1l_link: phy@2 { 1412 reg = <2>; 1413 #phy-cells = <0>; 1414 resets = <&serdes_wiz0 3>; 1415 cdns,num-lanes = <1>; 1416 cdns,phy-type = <PHY_TYPE_PCIE>; 1417 }; 1418 1419 /* Aquila USB0 SS */ 1420 serdes0_usb0_ss_link: phy@3 { 1421 reg = <3>; 1422 #phy-cells = <0>; 1423 resets = <&serdes_wiz0 4>; 1424 cdns,num-lanes = <1>; 1425 cdns,phy-type = <PHY_TYPE_USB3>; 1426 }; 1427}; 1428 1429&serdes1 { 1430 status = "okay"; 1431 1432 /* Aquila PCIE_1 */ 1433 serdes1_pcie0_2l_link: phy@0 { 1434 reg = <0>; 1435 #phy-cells = <0>; 1436 resets = <&serdes_wiz1 1>, <&serdes_wiz1 2>; 1437 cdns,num-lanes = <2>; 1438 cdns,phy-type = <PHY_TYPE_PCIE>; 1439 }; 1440 1441 /* On-module PCIe USB Bridge */ 1442 serdes1_pcie2_1l_link: phy@2 { 1443 reg = <2>; 1444 #phy-cells = <0>; 1445 resets = <&serdes_wiz1 3>; 1446 cdns,num-lanes = <1>; 1447 cdns,phy-type = <PHY_TYPE_PCIE>; 1448 }; 1449}; 1450 1451&serdes2 { 1452 status = "disabled"; 1453 1454 /* Aquila ETH_2 xGMII */ 1455 serdes2_sgmii_link: phy@3 { 1456 reg = <3>; 1457 #phy-cells = <0>; 1458 resets = <&serdes_wiz2 4>; 1459 cdns,num-lanes = <1>; 1460 cdns,phy-type = <PHY_TYPE_SGMII>; 1461 }; 1462}; 1463 1464&serdes4 { 1465 status = "disabled"; 1466 1467 /* Aquila DP_1 */ 1468 serdes4_dp0_link: phy@0 { 1469 reg = <0>; 1470 #phy-cells = <0>; 1471 resets = <&serdes_wiz4 1>, <&serdes_wiz4 2>, 1472 <&serdes_wiz4 3>, <&serdes_wiz4 4>; 1473 cdns,max-bit-rate = <5400>; 1474 cdns,num-lanes = <4>; 1475 cdns,phy-type = <PHY_TYPE_DP>; 1476 }; 1477}; 1478 1479&serdes_refclk { 1480 clock-frequency = <100000000>; 1481 status = "okay"; 1482}; 1483 1484&serdes_ln_ctrl { 1485 idle-states = <J784S4_SERDES0_LANE0_PCIE1_LANE0>, /* Aquila PCIE_2 L0 */ 1486 <J784S4_SERDES0_LANE1_PCIE1_LANE1>, /* Aquila PCIE_2 L1 */ 1487 <J784S4_SERDES0_LANE2_PCIE3_LANE0>, /* On-module PCIe Wi-Fi */ 1488 <J784S4_SERDES0_LANE3_USB>, /* Aquila USB0 SS */ 1489 <J784S4_SERDES1_LANE0_PCIE0_LANE0>, /* Aquila PCIE_1 L0 */ 1490 <J784S4_SERDES1_LANE1_PCIE0_LANE1>, /* Aquila PCIE_1 L1 */ 1491 <J784S4_SERDES1_LANE2_PCIE2_LANE0>, /* On-module PCIe USB Bridge */ 1492 <J784S4_SERDES1_LANE3_QSGMII_LANE2>, /* Aquila SGMII MSP_9 */ 1493 <J784S4_SERDES2_LANE0_QSGMII_LANE5>, /* Aquila SGMII MSP_6 */ 1494 <J784S4_SERDES2_LANE1_QSGMII_LANE6>, /* Aquila SGMII MSP_7 */ 1495 <J784S4_SERDES2_LANE2_QSGMII_LANE7>, /* Aquila SGMII MSP_8 */ 1496 <J784S4_SERDES2_LANE3_QSGMII_LANE8>, /* Aquila ETH_2 xGMII */ 1497 <J784S4_SERDES4_LANE0_EDP_LANE0>, /* Aquila DP L0 */ 1498 <J784S4_SERDES4_LANE1_EDP_LANE1>, /* Aquila DP L1 */ 1499 <J784S4_SERDES4_LANE2_EDP_LANE2>, /* Aquila DP L2 */ 1500 <J784S4_SERDES4_LANE3_EDP_LANE3>; /* Aquila DP L3 */ 1501}; 1502 1503&serdes_wiz0 { 1504 status = "okay"; 1505}; 1506 1507&serdes_wiz1 { 1508 status = "okay"; 1509}; 1510 1511&serdes_wiz2 { 1512 status = "disabled"; 1513}; 1514 1515&serdes_wiz4 { 1516 status = "disabled"; 1517}; 1518 1519/* Aquila ADC_[1-4] */ 1520&tscadc0 { 1521 pinctrl-names = "default"; 1522 pinctrl-0 = <&pinctrl_mcu_adc0>; 1523 status = "disabled"; 1524 1525 adc { 1526 ti,adc-channels = <0 1 2 3>; 1527 }; 1528}; 1529 1530&usb0 { 1531 phys = <&serdes0_usb0_ss_link>; 1532 phy-names = "cdns3,usb3-phy"; 1533 dr_mode = "otg"; 1534 maximum-speed = "super-speed"; 1535 usb-role-switch; 1536 status = "disabled"; 1537}; 1538 1539&usb_serdes_mux { 1540 idle-states = <0>; /* USB0 to SERDES lane 3 */ 1541}; 1542 1543&usbss0 { 1544 ti,vbus-divider; 1545 status = "disabled"; 1546}; 1547 1548&wkup_gpio0 { 1549 gpio-line-names = 1550 "", /* 0 */ 1551 "", 1552 "", 1553 "AQUILA_C53", 1554 "AQUILA_B55", 1555 "AQUILA_B56", 1556 "AQUILA_B32", 1557 "AQUILA_B34", 1558 "AQUILA_C17", 1559 "AQUILA_C16", 1560 "AQUILA_D22", /* 10 */ 1561 "", 1562 "", 1563 "", 1564 "", 1565 "", 1566 "AQUILA_B65", 1567 "AQUILA_C20", 1568 "AQUILA_B63", 1569 "AQUILA_B68", 1570 "AQUILA_B67", /* 20 */ 1571 "AQUILA_B61", 1572 "AQUILA_B60", 1573 "AQUILA_B70", 1574 "AQUILA_B71", 1575 "AQUILA_B72", 1576 "AQUILC_B73", 1577 "AQUILA_B66", 1578 "AQUILA_B62", 1579 "AQUILA_C21", 1580 "AQUILA_C22", /* 30 */ 1581 "AQUILA_C23", 1582 "AQUILA_C01", 1583 "AQUILA_C02", 1584 "", 1585 "AQUILA_D21", 1586 "", 1587 "AQUILA_C03", 1588 "AQUILA_C24", 1589 "AQUILA_C04", 1590 "AQUILA_B84", /* 40 */ 1591 "", 1592 "AQUILA_B86", 1593 "AQUILA_B87", 1594 "", 1595 "", 1596 "AQUILA_B83", 1597 "", 1598 "", 1599 "", 1600 "", /* 50 */ 1601 "", 1602 "", 1603 "", 1604 "", 1605 "", 1606 "", 1607 "", 1608 "AQUILA_B31", 1609 "AQUILA_B33", 1610 "AQUILA_B50", /* 60 */ 1611 "AQUILA_B51", 1612 "", 1613 "", 1614 "", 1615 "AQUILA_D08", 1616 "", 1617 "", 1618 "", 1619 "", 1620 "", /* 70 */ 1621 "AQUILA_D01", 1622 "AQUILA_D02", 1623 "AQUILA_D03", 1624 "AQUILA_D04", 1625 "AQUILA_D54", 1626 "AQUILA_D55", 1627 "AQUILA_C55", 1628 "AQUILA_C56", 1629 "", 1630 "AQUILA_C36", /* 80 */ 1631 "", 1632 "", 1633 "", 1634 "", 1635 "", 1636 "", 1637 "AQUILA_D07", 1638 ""; 1639 1640 status = "okay"; 1641}; 1642 1643/* On-module I2C - WKUP_I2C0 */ 1644&wkup_i2c0 { 1645 pinctrl-names = "default"; 1646 pinctrl-0 = <&pinctrl_wkup_i2c0>; 1647 clock-frequency = <400000>; 1648 status = "okay"; 1649 1650 som_gpio_expander: gpio@21 { 1651 compatible = "ti,tca6408"; 1652 reg = <0x21>; 1653 #gpio-cells = <2>; 1654 gpio-controller; 1655 gpio-line-names = 1656 "USB_MUX_SEL", 1657 "COLD_RESET_REQ", 1658 "PWR_DOWN_REQ", 1659 "PCIE_3_RESET#", 1660 "PCIE_4_RESET#", 1661 "WIFI_DISABLE", 1662 "BT_DISABLE", 1663 "SDIO_PWR_SEL_3.3V"; 1664 }; 1665 1666 rtc_i2c: rtc@32 { 1667 compatible = "epson,rx8130"; 1668 reg = <0x32>; 1669 }; 1670 1671 tps62873a: regulator@40 { 1672 compatible = "ti,tps62873"; 1673 reg = <0x40>; 1674 regulator-always-on; 1675 regulator-boot-on; 1676 regulator-max-microvolt = <900000>; 1677 regulator-min-microvolt = <600000>; 1678 regulator-name = "+VDD_CPU_AVS"; 1679 }; 1680 1681 tps62873b: regulator@43 { 1682 compatible = "ti,tps62873"; 1683 reg = <0x43>; 1684 regulator-always-on; 1685 regulator-boot-on; 1686 regulator-max-microvolt = <840000>; 1687 regulator-min-microvolt = <760000>; 1688 regulator-name = "+V0.8_VDD_CORE"; 1689 }; 1690 1691 pmic_tps6594: pmic@48 { 1692 compatible = "ti,tps6594-q1"; 1693 reg = <0x48>; 1694 pinctrl-names = "default"; 1695 pinctrl-0 = <&pinctrl_pmic_int>; 1696 interrupt-parent = <&main_gpio0>; 1697 interrupts = <0 IRQ_TYPE_EDGE_FALLING>; 1698 #gpio-cells = <2>; 1699 gpio-controller; 1700 buck12-supply = <®_vin>; 1701 buck3-supply = <®_vin>; 1702 buck4-supply = <®_vin>; 1703 buck5-supply = <®_vin>; 1704 ldo1-supply = <®_vin>; 1705 ldo2-supply = <®_vin>; 1706 ldo3-supply = <®_vin>; 1707 ldo4-supply = <®_vin>; 1708 system-power-controller; 1709 ti,primary-pmic; 1710 1711 regulators { 1712 reg_vdd_ddr: buck12 { 1713 regulator-always-on; 1714 regulator-boot-on; 1715 regulator-max-microvolt = <1100000>; 1716 regulator-min-microvolt = <1100000>; 1717 regulator-name = "+V1.1_VDD_DDR (PMIC BUCK12)"; 1718 }; 1719 1720 reg_vdd_ram: buck3 { 1721 regulator-always-on; 1722 regulator-boot-on; 1723 regulator-max-microvolt = <850000>; 1724 regulator-min-microvolt = <850000>; 1725 regulator-name = "+V0.85_VDD_RAM (PMIC BUCK3)"; 1726 }; 1727 1728 reg_vdd_io: buck4 { 1729 regulator-always-on; 1730 regulator-boot-on; 1731 regulator-max-microvolt = <1800000>; 1732 regulator-min-microvolt = <1800000>; 1733 regulator-name = "+V1.8_VDD_IO (PMIC BUCK4)"; 1734 }; 1735 1736 reg_3v3_vio: buck5 { 1737 regulator-always-on; 1738 regulator-boot-on; 1739 regulator-max-microvolt = <3300000>; 1740 regulator-min-microvolt = <3300000>; 1741 regulator-name = "+V3.3_VIO (PMIC BUCK5)"; 1742 }; 1743 1744 reg_vda_phy: ldo1 { 1745 regulator-always-on; 1746 regulator-boot-on; 1747 regulator-max-microvolt = <1800000>; 1748 regulator-min-microvolt = <1800000>; 1749 regulator-name = "+V1.8_VDA_PHY (PMIC LDO1)"; 1750 }; 1751 1752 reg_2v5_eth: ldo2 { 1753 regulator-always-on; 1754 regulator-boot-on; 1755 regulator-max-microvolt = <2500000>; 1756 regulator-min-microvolt = <2500000>; 1757 regulator-name = "+V2.5_ETH (PMIC LDO2)"; 1758 }; 1759 1760 reg_vda_dll: ldo3 { 1761 regulator-always-on; 1762 regulator-boot-on; 1763 regulator-max-microvolt = <800000>; 1764 regulator-min-microvolt = <800000>; 1765 regulator-name = "+V0.8_VDA_DLL (PMIC LDO3)"; 1766 }; 1767 1768 reg_vda_pll: ldo4 { 1769 regulator-always-on; 1770 regulator-boot-on; 1771 regulator-max-microvolt = <1800000>; 1772 regulator-min-microvolt = <1800000>; 1773 regulator-name = "+V0.8_VDA_PLL (PMIC LDO4)"; 1774 }; 1775 }; 1776 }; 1777 1778 temperature-sensor@4f { 1779 compatible = "ti,tmp1075"; 1780 reg = <0x4f>; 1781 }; 1782 1783 som_eeprom: eeprom@50 { 1784 compatible = "st,24c02", "atmel,24c02"; 1785 reg = <0x50>; 1786 pagesize = <16>; 1787 }; 1788}; 1789 1790&wkup0_crit { 1791 temperature = <105000>; 1792}; 1793 1794&wkup0_thermal { 1795 trips { 1796 wkup0_alert0: trip-point0 { 1797 temperature = <70000>; 1798 hysteresis = <2000>; 1799 type = "active"; 1800 }; 1801 1802 wkup0_alert1: trip-point1 { 1803 temperature = <85000>; 1804 hysteresis = <2000>; 1805 type = "active"; 1806 }; 1807 }; 1808}; 1809 1810&wkup1_crit { 1811 temperature = <105000>; 1812}; 1813 1814&wkup1_thermal { 1815 trips { 1816 wkup1_alert0: trip-point0 { 1817 temperature = <70000>; 1818 hysteresis = <2000>; 1819 type = "active"; 1820 }; 1821 1822 wkup1_alert1: trip-point1 { 1823 temperature = <85000>; 1824 hysteresis = <2000>; 1825 type = "active"; 1826 }; 1827 }; 1828}; 1829 1830&wkup_gpio_intr { 1831 status = "okay"; 1832}; 1833 1834/* Aquila UART_2 */ 1835&wkup_uart0 { 1836 pinctrl-names = "default"; 1837 pinctrl-0 = <&pinctrl_wkup_uart0>; 1838 status = "disabled"; 1839}; 1840 1841#include "k3-j784s4-j742s2-ti-ipc-firmware-common.dtsi" 1842#include "k3-j784s4-ti-ipc-firmware.dtsi"
~/
Read-only file preview.