FILE
k3-am642-tqma64xxl.dtsi
File preview with syntax highlighting.
linux-6.19.14/arch/arm64/boot/dts/ti/k3-am642-tqma64xxl.dtsi
1// SPDX-License-Identifier: GPL-2.0-only OR MIT 2/* 3 * Copyright (C) 2021 Texas Instruments Incorporated - https://www.ti.com/ 4 * Copyright (c) 2022-2024 TQ-Systems GmbH <linux@ew.tq-group.com>, D-82229 Seefeld, Germany. 5 */ 6 7#include "k3-am642.dtsi" 8 9/ { 10 aliases { 11 i2c0 = &main_i2c0; 12 mmc0 = &sdhci0; 13 spi0 = &ospi0; 14 }; 15 16 memory@80000000 { 17 device_type = "memory"; 18 /* 1G RAM - default variant */ 19 reg = <0x00000000 0x80000000 0x00000000 0x40000000>; 20 bootph-pre-ram; 21 }; 22 23 reserved_memory: reserved-memory { 24 #address-cells = <2>; 25 #size-cells = <2>; 26 ranges; 27 28 secure_ddr: optee@9e800000 { 29 reg = <0x00 0x9e800000 0x00 0x01800000>; 30 alignment = <0x1000>; 31 no-map; 32 }; 33 34 main_r5fss0_core0_dma_memory_region: memory@a0000000 { 35 compatible = "shared-dma-pool"; 36 reg = <0x00 0xa0000000 0x00 0x100000>; 37 no-map; 38 }; 39 40 main_r5fss0_core0_memory_region: memory@a0100000 { 41 compatible = "shared-dma-pool"; 42 reg = <0x00 0xa0100000 0x00 0xf00000>; 43 no-map; 44 }; 45 }; 46 47 reg_1v8: regulator-1v8 { 48 compatible = "regulator-fixed"; 49 regulator-name = "V_1V8"; 50 regulator-min-microvolt = <1800000>; 51 regulator-max-microvolt = <1800000>; 52 regulator-always-on; 53 regulator-boot-on; 54 }; 55}; 56 57&fss { 58 bootph-all; 59}; 60 61&main_i2c0 { 62 pinctrl-names = "default"; 63 pinctrl-0 = <&main_i2c0_pins>; 64 clock-frequency = <400000>; 65 bootph-pre-ram; 66 status = "okay"; 67 68 tmp1075: temperature-sensor@4a { 69 compatible = "ti,tmp1075"; 70 reg = <0x4a>; 71 vs-supply = <®_1v8>; 72 }; 73 74 eeprom0: eeprom@50 { 75 compatible = "st,24c02", "atmel,24c02"; 76 reg = <0x50>; 77 vcc-supply = <®_1v8>; 78 pagesize = <16>; 79 read-only; 80 bootph-pre-ram; 81 }; 82 83 pcf85063: rtc@51 { 84 compatible = "nxp,pcf85063a"; 85 reg = <0x51>; 86 quartz-load-femtofarads = <12500>; 87 }; 88 89 eeprom1: eeprom@54 { 90 compatible = "st,24c64", "atmel,24c64"; 91 reg = <0x54>; 92 vcc-supply = <®_1v8>; 93 pagesize = <32>; 94 }; 95}; 96 97&ospi0 { 98 pinctrl-names = "default"; 99 pinctrl-0 = <&ospi0_pins>; 100 bootph-all; 101 status = "okay"; 102 103 flash@0 { 104 compatible = "jedec,spi-nor"; 105 reg = <0>; 106 spi-tx-bus-width = <8>; 107 spi-rx-bus-width = <8>; 108 spi-max-frequency = <84000000>; 109 bootph-all; 110 cdns,tshsl-ns = <60>; 111 cdns,tsd2d-ns = <60>; 112 cdns,tchsh-ns = <60>; 113 cdns,tslch-ns = <60>; 114 cdns,read-delay = <2>; 115 116 partitions { 117 compatible = "fixed-partitions"; 118 #address-cells = <1>; 119 #size-cells = <1>; 120 121 /* Filled by bootloader */ 122 }; 123 }; 124}; 125 126&sdhci0 { 127 status = "okay"; 128 non-removable; 129 disable-wp; 130 no-sdio; 131 no-sd; 132 bootph-all; 133 ti,driver-strength-ohm = <50>; 134}; 135 136&main_pmx0 { 137 main_i2c0_pins: main-i2c0-pins { 138 pinctrl-single,pins = < 139 /* (A18) I2C0_SCL */ 140 AM64X_IOPAD(0x0260, PIN_INPUT_PULLUP, 0) 141 /* (B18) I2C0_SDA */ 142 AM64X_IOPAD(0x0264, PIN_INPUT_PULLUP, 0) 143 >; 144 bootph-pre-ram; 145 }; 146 147 ospi0_pins: ospi0-pins { 148 pinctrl-single,pins = < 149 /* (N20) OSPI0_CLK */ 150 AM64X_IOPAD(0x0000, PIN_OUTPUT, 0) 151 /* (L19) OSPI0_CSn0 */ 152 AM64X_IOPAD(0x002c, PIN_OUTPUT, 0) 153 /* (M19) OSPI0_D0 */ 154 AM64X_IOPAD(0x000c, PIN_INPUT, 0) 155 /* (M18) OSPI0_D1 */ 156 AM64X_IOPAD(0x0010, PIN_INPUT, 0) 157 /* (M20) OSPI0_D2 */ 158 AM64X_IOPAD(0x0014, PIN_INPUT, 0) 159 /* (M21) OSPI0_D3 */ 160 AM64X_IOPAD(0x0018, PIN_INPUT, 0) 161 /* (P21) OSPI0_D4 */ 162 AM64X_IOPAD(0x001c, PIN_INPUT, 0) 163 /* (P20) OSPI0_D5 */ 164 AM64X_IOPAD(0x0020, PIN_INPUT, 0) 165 /* (N18) OSPI0_D6 */ 166 AM64X_IOPAD(0x0024, PIN_INPUT, 0) 167 /* (M17) OSPI0_D7 */ 168 AM64X_IOPAD(0x0028, PIN_INPUT, 0) 169 /* (N19) OSPI0_DQS */ 170 AM64X_IOPAD(0x0008, PIN_INPUT, 0) 171 >; 172 bootph-all; 173 }; 174}; 175 176#include "k3-am64-ti-ipc-firmware.dtsi"
~/
Read-only file preview.