k3-am62-verdin-yavia.dtsi

  1// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
  2/*
  3 * Copyright 2023 Toradex
  4 *
  5 * Common dtsi for Verdin AM62 SoM on Yavia carrier board
  6 *
  7 * https://www.toradex.com/computer-on-modules/verdin-arm-family/ti-am62
  8 * https://www.toradex.com/products/carrier-board/yavia
  9 */
 10
 11#include <dt-bindings/leds/common.h>
 12
 13/ {
 14	leds {
 15		compatible = "gpio-leds";
 16		pinctrl-names = "default";
 17		pinctrl-0 = <&pinctrl_qspi1_clk_gpio>,
 18			    <&pinctrl_qspi1_cs_gpio>,
 19			    <&pinctrl_qspi1_io0_gpio>,
 20			    <&pinctrl_qspi1_io1_gpio>,
 21			    <&pinctrl_qspi1_io2_gpio>,
 22			    <&pinctrl_qspi1_io3_gpio>;
 23
 24		/* SODIMM 52 - LD1_RED */
 25		led-0 {
 26			color = <LED_COLOR_ID_RED>;
 27			function = LED_FUNCTION_DEBUG;
 28			function-enumerator = <1>;
 29			gpios = <&main_gpio0 0 GPIO_ACTIVE_HIGH>;
 30		};
 31		/* SODIMM 54 - LD1_GREEN */
 32		led-1 {
 33			color = <LED_COLOR_ID_GREEN>;
 34			function = LED_FUNCTION_DEBUG;
 35			function-enumerator = <1>;
 36			gpios = <&main_gpio0 11 GPIO_ACTIVE_HIGH>;
 37		};
 38		/* SODIMM 56 - LD1_BLUE */
 39		led-2 {
 40			color = <LED_COLOR_ID_BLUE>;
 41			function = LED_FUNCTION_DEBUG;
 42			function-enumerator = <1>;
 43			gpios = <&main_gpio0 3 GPIO_ACTIVE_HIGH>;
 44		};
 45		/* SODIMM 58 - LD2_RED */
 46		led-3 {
 47			color = <LED_COLOR_ID_RED>;
 48			function = LED_FUNCTION_DEBUG;
 49			function-enumerator = <2>;
 50			gpios = <&main_gpio0 4 GPIO_ACTIVE_HIGH>;
 51		};
 52		/* SODIMM 60 - LD2_GREEN */
 53		led-4 {
 54			color = <LED_COLOR_ID_GREEN>;
 55			function = LED_FUNCTION_DEBUG;
 56			function-enumerator = <2>;
 57			gpios = <&main_gpio0 5 GPIO_ACTIVE_HIGH>;
 58		};
 59		/* SODIMM 62 - LD2_BLUE */
 60		led-5 {
 61			color = <LED_COLOR_ID_BLUE>;
 62			function = LED_FUNCTION_DEBUG;
 63			function-enumerator = <2>;
 64			gpios = <&main_gpio0 6 GPIO_ACTIVE_HIGH>;
 65		};
 66	};
 67};
 68
 69/* Verdin ETHs */
 70&cpsw3g {
 71	status = "okay";
 72};
 73
 74/* MDIO, shared by Verdin ETH_1 (On-module PHY) and Verdin ETH_2_RGMII */
 75&cpsw3g_mdio {
 76	status = "okay";
 77};
 78
 79/* Verdin ETH_1 (On-module PHY) */
 80&cpsw_port1 {
 81	status = "okay";
 82};
 83
 84/* Verdin PWM_1, PWM_2 */
 85&epwm0 {
 86	status = "okay";
 87};
 88
 89/* Verdin PWM_3_DSI */
 90&epwm1 {
 91	status = "okay";
 92};
 93
 94&main_gpio0 {
 95	pinctrl-names = "default";
 96	pinctrl-0 = <&pinctrl_ctrl_sleep_moci>,
 97		    <&pinctrl_gpio_5>,
 98		    <&pinctrl_gpio_6>,
 99		    <&pinctrl_gpio_7>,
100		    <&pinctrl_gpio_8>,
101		    <&pinctrl_qspi1_cs2_gpio>;
102};
103
104&main_gpio1 {
105	pinctrl-names = "default";
106	pinctrl-0 = <&pinctrl_qspi1_dqs_gpio>;
107};
108
109/* Verdin I2C_1 */
110&main_i2c1 {
111	status = "okay";
112
113	/* Temperature sensor */
114	sensor@4f {
115		compatible = "ti,tmp75c";
116		reg = <0x4f>;
117	};
118
119	/* EEPROM */
120	eeprom@57 {
121		compatible = "st,24c02", "atmel,24c02";
122		reg = <0x57>;
123		pagesize = <16>;
124	};
125};
126
127/* Verdin I2C_2_DSI */
128&main_i2c2 {
129	status = "okay";
130};
131
132/* Verdin I2C_4_CSI */
133&main_i2c3 {
134	status = "okay";
135};
136
137/* Verdin CAN_1 */
138&main_mcan0 {
139	status = "okay";
140};
141
142/* Verdin SPI_1 */
143&main_spi1 {
144	status = "okay";
145};
146
147/* Verdin UART_3 */
148&main_uart0 {
149	status = "okay";
150};
151
152/* Verdin UART_1 */
153&main_uart1 {
154	status = "okay";
155};
156
157&mcu_gpio0 {
158	pinctrl-names = "default";
159	pinctrl-0 = <&pinctrl_gpio_1>,
160		    <&pinctrl_gpio_2>,
161		    <&pinctrl_gpio_3>,
162		    <&pinctrl_gpio_4>,
163		    <&pinctrl_pcie_1_reset>;
164};
165
166/* Verdin I2C_3_HDMI */
167&mcu_i2c0 {
168	status = "okay";
169};
170
171/* Verdin CAN_2 */
172&mcu_mcan0 {
173	status = "okay";
174};
175
176/* Verdin UART_4 */
177&mcu_uart0 {
178	status = "okay";
179};
180
181/* Verdin SD_1 */
182&sdhci1 {
183	status = "okay";
184};
185
186/* Verdin USB_1 */
187&usbss0 {
188	status = "okay";
189};
190
191&usb0 {
192	status = "okay";
193};
194
195/* Verdin USB_2 */
196&usbss1 {
197	status = "okay";
198};
199
200&usb1 {
201	status = "okay";
202};
203
204/* Verdin CTRL_WAKE1_MICO# */
205&verdin_gpio_keys {
206	status = "okay";
207};
208
209/* Verdin PCIE_1_RESET# */
210&verdin_pcie_1_reset_hog {
211	status = "okay";
212};
213
214/* Verdin UART_2 */
215&wkup_uart0 {
216	status = "okay";
217};