rk3588-orangepi-5-compact.dtsi

  1// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
  2
  3/dts-v1/;
  4
  5#include <dt-bindings/gpio/gpio.h>
  6#include <dt-bindings/pinctrl/rockchip.h>
  7#include "rk3588-orangepi-5.dtsi"
  8
  9/ {
 10	vcc5v0_usb30_otg: vcc5v0-usb30-otg-regulator {
 11		compatible = "regulator-fixed";
 12		enable-active-high;
 13		/* USB_OTG_PWREN */
 14		gpios = <&gpio4 RK_PB3 GPIO_ACTIVE_HIGH>;
 15		pinctrl-names = "default";
 16		pinctrl-0 = <&usb_otg_pwren>;
 17		regulator-name = "vcc5v0_usb30_otg";
 18		regulator-min-microvolt = <5000000>;
 19		regulator-max-microvolt = <5000000>;
 20		vin-supply = <&vcc5v0_sys>;
 21	};
 22};
 23
 24&headphone_amp {
 25	/* PHONE_CTL */
 26	enable-gpios = <&gpio4 RK_PB0 GPIO_ACTIVE_HIGH>;
 27};
 28
 29&analog_sound {
 30	pinctrl-names = "default";
 31	pinctrl-0 = <&hp_detect>;
 32	simple-audio-card,aux-devs = <&headphone_amp>;
 33	simple-audio-card,hp-det-gpios = <&gpio3 RK_PD2 GPIO_ACTIVE_HIGH>;
 34
 35	simple-audio-card,routing =
 36		"Headphones", "LOUT1",
 37		"Headphones", "ROUT1",
 38		"LINPUT1", "Microphone Jack",
 39		"RINPUT1", "Microphone Jack",
 40		"LINPUT2", "Onboard Microphone",
 41		"RINPUT2", "Onboard Microphone";
 42	simple-audio-card,widgets =
 43		"Microphone", "Microphone Jack",
 44		"Microphone", "Onboard Microphone",
 45		"Headphone", "Headphones";
 46};
 47
 48&fan {
 49	/* FAN_CTL_H */
 50	pwms = <&pwm9 0 50000 0>;
 51};
 52
 53&hym8563 {
 54	interrupt-parent = <&gpio0>;
 55	interrupts = <RK_PC4 IRQ_TYPE_LEVEL_LOW>;
 56	pinctrl-names = "default";
 57	pinctrl-0 = <&rtc_int_l>;
 58};
 59
 60&led_blue_pwm {
 61	/* PWM_LED1 */
 62	status = "okay";
 63};
 64
 65/* phy2 */
 66&pcie2x1l1 {
 67	reset-gpios = <&gpio3 RK_PD4 GPIO_ACTIVE_HIGH>;
 68	vpcie3v3-supply = <&vcc3v3_pcie_eth>;
 69	status = "okay";
 70};
 71
 72&pinctrl {
 73	hym8563 {
 74		rtc_int_l: hym8563-int {
 75			rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>;
 76		};
 77	};
 78
 79	sound {
 80		hp_detect: hp-detect {
 81			rockchip,pins = <3 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
 82		};
 83	};
 84
 85	usb {
 86		usb_host_pwren: usb-host-pwren {
 87			rockchip,pins = <3 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
 88		};
 89	};
 90
 91	wireless-bluetooth {
 92		bt_reg_on: bt-reg-on {
 93			rockchip,pins = <4 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>;
 94		};
 95
 96		bt_wake_host: bt-wake-host {
 97			rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_down>;
 98		};
 99
100		host_wake_bt: host-wake-bt {
101			rockchip,pins = <4 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
102		};
103	};
104};
105
106&pwm4 {
107	pinctrl-names = "default";
108	pinctrl-0 = <&pwm4m0_pins>;
109	status = "okay";
110};
111
112&pwm5 {
113	pinctrl-names = "default";
114	pinctrl-0 = <&pwm5m1_pins>;
115	status = "okay";
116};
117
118&pwm9 {
119	pinctrl-names = "default";
120	pinctrl-0 = <&pwm9m2_pins>;
121	status = "okay";
122};
123
124&sfc {
125	pinctrl-names = "default";
126	pinctrl-0 = <&fspim2_pins>;
127};
128
129&u2phy0_otg {
130	phy-supply = <&vcc5v0_usb30_otg>;
131};
132
133&u2phy1_otg {
134	phy-supply = <&vcc5v0_usb20>;
135};
136
137&uart7 {
138	pinctrl-names = "default";
139	pinctrl-0 = <&uart7m0_xfer &uart7m0_ctsn &uart7m0_rtsn>;
140	uart-has-rtscts;
141	status = "okay";
142
143	bluetooth {
144		compatible = "brcm,bcm43438-bt";
145		clocks = <&hym8563>;
146		clock-names = "lpo";
147		device-wakeup-gpios = <&gpio4 RK_PC5 GPIO_ACTIVE_HIGH>;
148		interrupt-parent = <&gpio0>;
149		interrupts = <RK_PA0 IRQ_TYPE_EDGE_FALLING>;
150		interrupt-names = "host-wakeup";
151		pinctrl-names = "default";
152		pinctrl-0 = <&bt_reg_on>, <&host_wake_bt>, <&bt_wake_host>;
153		shutdown-gpios = <&gpio4 RK_PC4 GPIO_ACTIVE_HIGH>;
154		vbat-supply = <&vcc_3v3_s3>;
155		vddio-supply = <&vcc_1v8_s3>;
156	};
157};
158
159&usb_host0_xhci {
160	dr_mode = "host";
161};
162
163/* pcie eth. not a real regulator. 33VAUX */
164&vcc3v3_pcie_eth {
165	/* Ethernet_power_en */
166	gpios = <&gpio0 RK_PD3 GPIO_ACTIVE_LOW>;
167};
168
169/*
170 * Represents the vcc5v0_usb20 and vcc5v0_usb30 in the schematic,
171 * both regulators share the same enable gpio
172 */
173&vcc5v0_usb20 {
174	/* USB_HOST_PWREN */
175	gpios = <&gpio3 RK_PD5 GPIO_ACTIVE_HIGH>;
176	pinctrl-names = "default";
177	pinctrl-0 = <&usb_host_pwren>;
178};