rk3566-orangepi-3b.dtsi

  1// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
  2
  3#include <dt-bindings/gpio/gpio.h>
  4#include <dt-bindings/leds/common.h>
  5#include <dt-bindings/pinctrl/rockchip.h>
  6#include <dt-bindings/soc/rockchip,vop2.h>
  7#include "rk3566.dtsi"
  8
  9/ {
 10	model = "Xunlong Orange Pi 3B";
 11	compatible = "xunlong,orangepi-3b", "rockchip,rk3566";
 12
 13	aliases {
 14		ethernet0 = &gmac1;
 15		mmc0 = &sdhci;
 16		mmc1 = &sdmmc0;
 17		mmc2 = &sdmmc1;
 18	};
 19
 20	chosen {
 21		stdout-path = "serial2:1500000n8";
 22	};
 23
 24	hdmi-con {
 25		compatible = "hdmi-connector";
 26		type = "a";
 27
 28		port {
 29			hdmi_con_in: endpoint {
 30				remote-endpoint = <&hdmi_out_con>;
 31			};
 32		};
 33	};
 34
 35	leds {
 36		compatible = "gpio-leds";
 37		pinctrl-names = "default";
 38		pinctrl-0 = <&work_led>;
 39
 40		led-0 {
 41			color = <LED_COLOR_ID_GREEN>;
 42			default-state = "on";
 43			function = LED_FUNCTION_HEARTBEAT;
 44			gpios = <&gpio0 RK_PC0 GPIO_ACTIVE_HIGH>;
 45			linux,default-trigger = "heartbeat";
 46		};
 47	};
 48
 49	vcc3v3_pcie30: regulator-3v3-vcc-pcie30 {
 50		compatible = "regulator-fixed";
 51		enable-active-high;
 52		gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>;
 53		pinctrl-names = "default";
 54		pinctrl-0 = <&pcie20_pwren>;
 55		regulator-name = "vcc3v3_pcie30";
 56		regulator-min-microvolt = <3300000>;
 57		regulator-max-microvolt = <3300000>;
 58		vin-supply = <&vcc3v3_sys>;
 59	};
 60
 61	vcc3v3_sys: regulator-3v3-vcc-sys {
 62		compatible = "regulator-fixed";
 63		regulator-name = "vcc3v3_sys";
 64		regulator-always-on;
 65		regulator-boot-on;
 66		regulator-min-microvolt = <3300000>;
 67		regulator-max-microvolt = <3300000>;
 68		vin-supply = <&vcc5v0_sys>;
 69	};
 70
 71	vcc5v0_sys: regulator-5v0-vcc-sys {
 72		compatible = "regulator-fixed";
 73		regulator-name = "vcc5v0_sys";
 74		regulator-always-on;
 75		regulator-boot-on;
 76		regulator-min-microvolt = <5000000>;
 77		regulator-max-microvolt = <5000000>;
 78	};
 79
 80	vcc5v0_usb_host: regulator-5v0-vcc-usb-host {
 81		compatible = "regulator-fixed";
 82		enable-active-high;
 83		gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
 84		pinctrl-names = "default";
 85		pinctrl-0 = <&usb_host_pwren_h>;
 86		regulator-name = "vcc5v0_usb_host";
 87		regulator-min-microvolt = <5000000>;
 88		regulator-max-microvolt = <5000000>;
 89		vin-supply = <&vcc5v0_sys>;
 90	};
 91
 92	vcc5v0_usb_otg: regulator-5v0-vcc-usb-otg {
 93		compatible = "regulator-fixed";
 94		enable-active-high;
 95		gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
 96		pinctrl-names = "default";
 97		pinctrl-0 = <&usb_otg_pwren_h>;
 98		regulator-name = "vcc5v0_usb_otg";
 99		regulator-min-microvolt = <5000000>;
100		regulator-max-microvolt = <5000000>;
101		vin-supply = <&vcc5v0_sys>;
102	};
103
104	sdio_pwrseq: sdio-pwrseq {
105		compatible = "mmc-pwrseq-simple";
106		clocks = <&rk809 1>;
107		clock-names = "ext_clock";
108		pinctrl-names = "default";
109		pinctrl-0 = <&wifi_reg_on_h>;
110		post-power-on-delay-ms = <200>;
111		power-off-delay-us = <5000000>;
112		reset-gpios = <&gpio0 RK_PD3 GPIO_ACTIVE_LOW>;
113	};
114
115	sound {
116		compatible = "simple-audio-card";
117		simple-audio-card,format = "i2s";
118		simple-audio-card,name = "Analog RK809";
119		simple-audio-card,mclk-fs = <256>;
120
121		simple-audio-card,cpu {
122			sound-dai = <&i2s1_8ch>;
123		};
124
125		simple-audio-card,codec {
126			sound-dai = <&rk809>;
127		};
128	};
129};
130
131&combphy1 {
132	status = "okay";
133};
134
135&combphy2 {
136	status = "okay";
137};
138
139&cpu0 {
140	cpu-supply = <&vdd_cpu>;
141};
142
143&cpu1 {
144	cpu-supply = <&vdd_cpu>;
145};
146
147&cpu2 {
148	cpu-supply = <&vdd_cpu>;
149};
150
151&cpu3 {
152	cpu-supply = <&vdd_cpu>;
153};
154
155&gmac1 {
156	assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>;
157	assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru CLK_MAC1_2TOP>;
158	clock_in_out = "input";
159	phy-mode = "rgmii-id";
160	phy-supply = <&vcc_3v3>;
161	pinctrl-names = "default";
162	pinctrl-0 = <&gmac1m0_miim
163		     &gmac1m0_tx_bus2
164		     &gmac1m0_rx_bus2
165		     &gmac1m0_rgmii_clk
166		     &gmac1m0_rgmii_bus
167		     &gmac1m0_clkinout>;
168};
169
170&gpu {
171	mali-supply = <&vdd_gpu>;
172	status = "okay";
173};
174
175&hdmi {
176	avdd-0v9-supply = <&vdda0v9_image>;
177	avdd-1v8-supply = <&vcca1v8_image>;
178	status = "okay";
179};
180
181&hdmi_in {
182	hdmi_in_vp0: endpoint {
183		remote-endpoint = <&vp0_out_hdmi>;
184	};
185};
186
187&hdmi_out {
188	hdmi_out_con: endpoint {
189		remote-endpoint = <&hdmi_con_in>;
190	};
191};
192
193&hdmi_sound {
194	status = "okay";
195};
196
197&i2c0 {
198	status = "okay";
199
200	rk809: pmic@20 {
201		compatible = "rockchip,rk809";
202		reg = <0x20>;
203		assigned-clocks = <&cru I2S1_MCLKOUT_TX>;
204		assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>;
205		#clock-cells = <1>;
206		clocks = <&cru I2S1_MCLKOUT_TX>;
207		clock-names = "mclk";
208		clock-output-names = "rk809-clkout1", "rk809-clkout2";
209		interrupt-parent = <&gpio0>;
210		interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
211		pinctrl-names = "default";
212		pinctrl-0 = <&pmic_int_l>, <&i2s1m0_mclk>;
213		#sound-dai-cells = <0>;
214		system-power-controller;
215		wakeup-source;
216
217		vcc1-supply = <&vcc3v3_sys>;
218		vcc2-supply = <&vcc3v3_sys>;
219		vcc3-supply = <&vcc3v3_sys>;
220		vcc4-supply = <&vcc3v3_sys>;
221		vcc5-supply = <&vcc3v3_sys>;
222		vcc6-supply = <&vcc3v3_sys>;
223		vcc7-supply = <&vcc3v3_sys>;
224		vcc8-supply = <&vcc3v3_sys>;
225		vcc9-supply = <&vcc3v3_sys>;
226
227		regulators {
228			vdd_logic: DCDC_REG1 {
229				regulator-name = "vdd_logic";
230				regulator-always-on;
231				regulator-boot-on;
232				regulator-initial-mode = <0x2>;
233				regulator-min-microvolt = <500000>;
234				regulator-max-microvolt = <1350000>;
235				regulator-ramp-delay = <6001>;
236
237				regulator-state-mem {
238					regulator-off-in-suspend;
239				};
240			};
241
242			vdd_gpu: DCDC_REG2 {
243				regulator-name = "vdd_gpu";
244				regulator-always-on;
245				regulator-boot-on;
246				regulator-initial-mode = <0x2>;
247				regulator-min-microvolt = <500000>;
248				regulator-max-microvolt = <1350000>;
249				regulator-ramp-delay = <6001>;
250
251				regulator-state-mem {
252					regulator-off-in-suspend;
253				};
254			};
255
256			vcc_ddr: DCDC_REG3 {
257				regulator-name = "vcc_ddr";
258				regulator-always-on;
259				regulator-boot-on;
260				regulator-initial-mode = <0x2>;
261
262				regulator-state-mem {
263					regulator-on-in-suspend;
264				};
265			};
266
267			vdd_npu: DCDC_REG4 {
268				regulator-name = "vdd_npu";
269				regulator-initial-mode = <0x2>;
270				regulator-min-microvolt = <500000>;
271				regulator-max-microvolt = <1350000>;
272				regulator-ramp-delay = <6001>;
273
274				regulator-state-mem {
275					regulator-off-in-suspend;
276				};
277			};
278
279			vcc_1v8: DCDC_REG5 {
280				regulator-name = "vcc_1v8";
281				regulator-always-on;
282				regulator-boot-on;
283				regulator-min-microvolt = <1800000>;
284				regulator-max-microvolt = <1800000>;
285
286				regulator-state-mem {
287					regulator-off-in-suspend;
288				};
289			};
290
291			vdda0v9_image: LDO_REG1 {
292				regulator-name = "vdda0v9_image";
293				regulator-min-microvolt = <900000>;
294				regulator-max-microvolt = <900000>;
295
296				regulator-state-mem {
297					regulator-off-in-suspend;
298				};
299			};
300
301			vdda_0v9: LDO_REG2 {
302				regulator-name = "vdda_0v9";
303				regulator-always-on;
304				regulator-boot-on;
305				regulator-min-microvolt = <900000>;
306				regulator-max-microvolt = <900000>;
307
308				regulator-state-mem {
309					regulator-off-in-suspend;
310				};
311			};
312
313			vdda0v9_pmu: LDO_REG3 {
314				regulator-name = "vdda0v9_pmu";
315				regulator-always-on;
316				regulator-boot-on;
317				regulator-min-microvolt = <900000>;
318				regulator-max-microvolt = <900000>;
319
320				regulator-state-mem {
321					regulator-on-in-suspend;
322					regulator-suspend-microvolt = <900000>;
323				};
324			};
325
326			vccio_acodec: LDO_REG4 {
327				regulator-name = "vccio_acodec";
328				regulator-always-on;
329				regulator-boot-on;
330				regulator-min-microvolt = <3300000>;
331				regulator-max-microvolt = <3300000>;
332
333				regulator-state-mem {
334					regulator-off-in-suspend;
335				};
336			};
337
338			vccio_sd: LDO_REG5 {
339				regulator-name = "vccio_sd";
340				regulator-always-on;
341				regulator-boot-on;
342				regulator-min-microvolt = <1800000>;
343				regulator-max-microvolt = <3300000>;
344
345				regulator-state-mem {
346					regulator-off-in-suspend;
347				};
348			};
349
350			vcc3v3_pmu: LDO_REG6 {
351				regulator-name = "vcc3v3_pmu";
352				regulator-always-on;
353				regulator-boot-on;
354				regulator-min-microvolt = <3300000>;
355				regulator-max-microvolt = <3300000>;
356
357				regulator-state-mem {
358					regulator-on-in-suspend;
359					regulator-suspend-microvolt = <3300000>;
360				};
361			};
362
363			vcca_1v8: LDO_REG7 {
364				regulator-name = "vcca_1v8";
365				regulator-always-on;
366				regulator-boot-on;
367				regulator-min-microvolt = <1800000>;
368				regulator-max-microvolt = <1800000>;
369
370				regulator-state-mem {
371					regulator-off-in-suspend;
372				};
373			};
374
375			vcca1v8_pmu: LDO_REG8 {
376				regulator-name = "vcca1v8_pmu";
377				regulator-always-on;
378				regulator-boot-on;
379				regulator-min-microvolt = <1800000>;
380				regulator-max-microvolt = <1800000>;
381
382				regulator-state-mem {
383					regulator-on-in-suspend;
384					regulator-suspend-microvolt = <1800000>;
385				};
386			};
387
388			vcca1v8_image: LDO_REG9 {
389				regulator-name = "vcca1v8_image";
390				regulator-min-microvolt = <1800000>;
391				regulator-max-microvolt = <1800000>;
392
393				regulator-state-mem {
394					regulator-off-in-suspend;
395				};
396			};
397
398			vcc_3v3: SWITCH_REG1 {
399				regulator-name = "vcc_3v3";
400				regulator-always-on;
401				regulator-boot-on;
402
403				regulator-state-mem {
404					regulator-off-in-suspend;
405				};
406			};
407
408			vcc3v3_sd: SWITCH_REG2 {
409				regulator-name = "vcc3v3_sd";
410				regulator-always-on;
411				regulator-boot-on;
412
413				regulator-state-mem {
414					regulator-off-in-suspend;
415				};
416			};
417		};
418	};
419
420	vdd_cpu: regulator@40 {
421		compatible = "silergy,syr827";
422		reg = <0x40>;
423		fcs,suspend-voltage-selector = <1>;
424		regulator-name = "vdd_cpu";
425		regulator-always-on;
426		regulator-boot-on;
427		regulator-min-microvolt = <830000>;
428		regulator-max-microvolt = <1200000>;
429		regulator-ramp-delay = <2300>;
430		vin-supply = <&vcc3v3_sys>;
431
432		regulator-state-mem {
433			regulator-off-in-suspend;
434		};
435	};
436};
437
438&i2c2 {
439	pinctrl-0 = <&i2c2m1_xfer>;
440	status = "okay";
441};
442
443&i2s0_8ch {
444	status = "okay";
445};
446
447&i2s1_8ch {
448	pinctrl-names = "default";
449	pinctrl-0 = <&i2s1m0_sclktx
450		     &i2s1m0_lrcktx
451		     &i2s1m0_sdi0
452		     &i2s1m0_sdo0>;
453	rockchip,trcm-sync-tx-only;
454	status = "okay";
455};
456
457&pcie2x1 {
458	pinctrl-names = "default";
459	pinctrl-0 = <&pcie20_pins>;
460	reset-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
461	vpcie3v3-supply = <&vcc3v3_pcie30>;
462	status = "okay";
463};
464
465&pinctrl {
466	bluetooth {
467		bt_reg_on_h: bt-reg-on-h {
468			rockchip,pins = <2 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
469		};
470
471		bt_wake_host_h: bt-wake-host-h {
472			rockchip,pins = <2 RK_PC0 RK_FUNC_GPIO &pcfg_pull_down>;
473		};
474
475		host_wake_bt_h: host-wake-bt-h {
476			rockchip,pins = <2 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
477		};
478	};
479
480	leds {
481		work_led: work-led {
482			rockchip,pins = <0 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>;
483		};
484	};
485
486	pcie {
487		pcie20_pins: pcie20-pins {
488			rockchip,pins =
489				<1 RK_PB0 4 &pcfg_pull_none>,
490				<0 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>,
491				<1 RK_PB1 4 &pcfg_pull_none>;
492		};
493
494		pcie20_pwren: pcie20-pwren {
495			rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
496		};
497	};
498
499	pmic {
500		pmic_int_l: pmic-int-l {
501			rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
502		};
503	};
504
505	usb {
506		usb_host_pwren_h: usb-host-pwren-h {
507			rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
508		};
509
510		usb_otg_pwren_h: usb-otg-pwren-h {
511			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
512		};
513	};
514
515	wifi {
516		wifi_reg_on_h: wifi-reg-on-h {
517			rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
518		};
519
520		wifi_wake_host_h: wifi-wake-host-h {
521			rockchip,pins = <0 RK_PD6 RK_FUNC_GPIO &pcfg_pull_down>;
522		};
523	};
524};
525
526&pmu_io_domains {
527	pmuio1-supply = <&vcc3v3_pmu>;
528	pmuio2-supply = <&vcc3v3_pmu>;
529	vccio1-supply = <&vccio_acodec>;
530	vccio2-supply = <&vcc_1v8>;
531	vccio3-supply = <&vccio_sd>;
532	vccio4-supply = <&vcc_1v8>;
533	vccio6-supply = <&vcc_3v3>;
534	vccio7-supply = <&vcc_3v3>;
535	status = "okay";
536};
537
538&saradc {
539	vref-supply = <&vcca_1v8>;
540	status = "okay";
541};
542
543&sdhci {
544	bus-width = <8>;
545	cap-mmc-highspeed;
546	max-frequency = <200000000>;
547	mmc-hs200-1_8v;
548	non-removable;
549	pinctrl-names = "default";
550	pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>;
551	vmmc-supply = <&vcc_3v3>;
552	vqmmc-supply = <&vcc_1v8>;
553	status = "okay";
554};
555
556&sdmmc0 {
557	bus-width = <4>;
558	cap-sd-highspeed;
559	disable-wp;
560	pinctrl-names = "default";
561	pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
562	vmmc-supply = <&vcc3v3_sd>;
563	vqmmc-supply = <&vccio_sd>;
564	status = "okay";
565};
566
567&sdmmc1 {
568	bus-width = <4>;
569	cap-sd-highspeed;
570	cap-sdio-irq;
571	keep-power-in-suspend;
572	mmc-pwrseq = <&sdio_pwrseq>;
573	no-mmc;
574	no-sd;
575	non-removable;
576	pinctrl-names = "default";
577	pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_clk &sdmmc1_cmd>;
578	sd-uhs-sdr104;
579	vmmc-supply = <&vcc_3v3>;
580	vqmmc-supply = <&vcc_1v8>;
581	status = "okay";
582};
583
584&sfc {
585	#address-cells = <1>;
586	#size-cells = <0>;
587	status = "okay";
588
589	flash@0 {
590		compatible = "jedec,spi-nor";
591		reg = <0>;
592		spi-max-frequency = <104000000>;
593		spi-rx-bus-width = <4>;
594		spi-tx-bus-width = <1>;
595	};
596};
597
598&tsadc {
599	rockchip,hw-tshut-mode = <1>;
600	rockchip,hw-tshut-polarity = <0>;
601	status = "okay";
602};
603
604&uart1 {
605	pinctrl-names = "default";
606	pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn &uart1m0_rtsn>;
607	uart-has-rtscts;
608	status = "okay";
609};
610
611&uart2 {
612	status = "okay";
613};
614
615&usb_host0_ehci {
616	status = "okay";
617};
618
619&usb_host0_ohci {
620	status = "okay";
621};
622
623&usb_host0_xhci {
624	dr_mode = "host";
625	status = "okay";
626};
627
628&usb_host1_ehci {
629	status = "okay";
630};
631
632&usb_host1_ohci {
633	status = "okay";
634};
635
636&usb_host1_xhci {
637	status = "okay";
638};
639
640&usb2phy0 {
641	status = "okay";
642};
643
644&usb2phy0_host {
645	phy-supply = <&vcc5v0_usb_host>;
646	status = "okay";
647};
648
649&usb2phy0_otg {
650	phy-supply = <&vcc5v0_usb_otg>;
651	status = "okay";
652};
653
654&usb2phy1 {
655	status = "okay";
656};
657
658&usb2phy1_host {
659	phy-supply = <&vcc5v0_usb_host>;
660	status = "okay";
661};
662
663&usb2phy1_otg {
664	phy-supply = <&vcc5v0_usb_host>;
665	status = "okay";
666};
667
668&vop {
669	assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
670	assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
671	status = "okay";
672};
673
674&vop_mmu {
675	status = "okay";
676};
677
678&vp0 {
679	vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
680		reg = <ROCKCHIP_VOP2_EP_HDMI0>;
681		remote-endpoint = <&hdmi_in_vp0>;
682	};
683};