FILE
x1e80100-microsoft-romulus.dtsi
File preview with syntax highlighting.
linux-6.19.14/arch/arm64/boot/dts/qcom/x1e80100-microsoft-romulus.dtsi
1// SPDX-License-Identifier: BSD-3-Clause 2/* 3 * Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved. 4 */ 5 6#include <dt-bindings/gpio/gpio.h> 7#include <dt-bindings/input/gpio-keys.h> 8#include <dt-bindings/input/input.h> 9#include <dt-bindings/leds/common.h> 10#include <dt-bindings/regulator/qcom,rpmh-regulator.h> 11 12#include "hamoa.dtsi" 13#include "hamoa-pmics.dtsi" 14 15/ { 16 aliases { 17 serial0 = &uart2; 18 i2c0 = &i2c0; 19 i2c3 = &i2c3; 20 i2c4 = &i2c4; 21 i2c5 = &i2c5; 22 i2c7 = &i2c7; 23 }; 24 25 wcd938x: audio-codec { 26 compatible = "qcom,wcd9385-codec"; 27 28 reset-gpios = <&tlmm 191 GPIO_ACTIVE_LOW>; 29 30 qcom,micbias1-microvolt = <1800000>; 31 qcom,micbias2-microvolt = <1800000>; 32 qcom,micbias3-microvolt = <1800000>; 33 qcom,micbias4-microvolt = <1800000>; 34 qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>; 35 qcom,mbhc-headset-vthreshold-microvolt = <1700000>; 36 qcom,mbhc-headphone-vthreshold-microvolt = <50000>; 37 qcom,rx-device = <&wcd_rx>; 38 qcom,tx-device = <&wcd_tx>; 39 40 41 vdd-buck-supply = <&vreg_l15b>; 42 vdd-rxtx-supply = <&vreg_l15b>; 43 vdd-io-supply = <&vreg_l15b>; 44 vdd-mic-bias-supply = <&vreg_bob1>; 45 46 pinctrl-0 = <&wcd_default>; 47 pinctrl-names = "default"; 48 49 #sound-dai-cells = <1>; 50 }; 51 52 backlight: backlight { 53 compatible = "pwm-backlight"; 54 pwms = <&pmk8550_pwm 0 5000000>; 55 enable-gpios = <&pmc8380_3_gpios 4 GPIO_ACTIVE_HIGH>; 56 /* TODO: power-supply? */ 57 58 pinctrl-0 = <&edp_bl_en>, <&edp_bl_pwm>; 59 pinctrl-names = "default"; 60 }; 61 62 gpio-keys { 63 compatible = "gpio-keys"; 64 65 pinctrl-0 = <&hall_int_n_default>; 66 pinctrl-names = "default"; 67 68 switch-lid { 69 gpios = <&tlmm 2 GPIO_ACTIVE_LOW>; 70 linux,input-type = <EV_SW>; 71 linux,code = <SW_LID>; 72 wakeup-source; 73 wakeup-event-action = <EV_ACT_DEASSERTED>; 74 }; 75 }; 76 77 leds { 78 compatible = "gpio-leds"; 79 80 pinctrl-names = "default"; 81 pinctrl-0 = <&cam_indicator_en>; 82 83 led-camera-indicator { 84 label = "white:camera-indicator"; 85 function = LED_FUNCTION_INDICATOR; 86 color = <LED_COLOR_ID_WHITE>; 87 gpios = <&tlmm 225 GPIO_ACTIVE_HIGH>; 88 linux,default-trigger = "none"; 89 default-state = "off"; 90 /* Reuse as a panic indicator until we get a "camera on" trigger */ 91 panic-indicator; 92 }; 93 }; 94 95 pmic-glink { 96 compatible = "qcom,x1e80100-pmic-glink", 97 "qcom,sm8550-pmic-glink", 98 "qcom,pmic-glink"; 99 #address-cells = <1>; 100 #size-cells = <0>; 101 orientation-gpios = <&tlmm 121 GPIO_ACTIVE_HIGH>, 102 <&tlmm 123 GPIO_ACTIVE_HIGH>; 103 104 /* Left-side rear port */ 105 connector@0 { 106 compatible = "usb-c-connector"; 107 reg = <0>; 108 power-role = "dual"; 109 data-role = "dual"; 110 111 ports { 112 #address-cells = <1>; 113 #size-cells = <0>; 114 115 port@0 { 116 reg = <0>; 117 118 pmic_glink_ss0_hs_in: endpoint { 119 remote-endpoint = <&usb_1_ss0_dwc3_hs>; 120 }; 121 }; 122 123 port@1 { 124 reg = <1>; 125 126 pmic_glink_ss0_ss_in: endpoint { 127 remote-endpoint = <&retimer_ss0_ss_out>; 128 }; 129 }; 130 131 port@2 { 132 reg = <2>; 133 134 pmic_glink_ss0_con_sbu_in: endpoint { 135 remote-endpoint = <&retimer_ss0_con_sbu_out>; 136 }; 137 }; 138 }; 139 }; 140 141 /* Left-side front port */ 142 connector@1 { 143 compatible = "usb-c-connector"; 144 reg = <1>; 145 power-role = "dual"; 146 data-role = "dual"; 147 148 ports { 149 #address-cells = <1>; 150 #size-cells = <0>; 151 152 port@0 { 153 reg = <0>; 154 155 pmic_glink_ss1_hs_in: endpoint { 156 remote-endpoint = <&usb_1_ss1_dwc3_hs>; 157 }; 158 }; 159 160 port@1 { 161 reg = <1>; 162 163 pmic_glink_ss1_ss_in: endpoint { 164 remote-endpoint = <&retimer_ss1_ss_out>; 165 }; 166 }; 167 168 port@2 { 169 reg = <2>; 170 171 pmic_glink_ss1_con_sbu_in: endpoint { 172 remote-endpoint = <&retimer_ss1_con_sbu_out>; 173 }; 174 }; 175 }; 176 }; 177 }; 178 179 reserved-memory { 180 linux,cma { 181 compatible = "shared-dma-pool"; 182 size = <0x0 0x8000000>; 183 reusable; 184 linux,cma-default; 185 }; 186 }; 187 188 vreg_edp_3p3: regulator-edp-3p3 { 189 compatible = "regulator-fixed"; 190 191 regulator-name = "VREG_EDP_3P3"; 192 regulator-min-microvolt = <3300000>; 193 regulator-max-microvolt = <3300000>; 194 195 gpio = <&tlmm 70 GPIO_ACTIVE_HIGH>; 196 enable-active-high; 197 198 pinctrl-0 = <&edp_reg_en>; 199 pinctrl-names = "default"; 200 201 regulator-boot-on; 202 }; 203 204 vreg_rtmr0_1p15: regulator-rtmr0-1p15 { 205 compatible = "regulator-fixed"; 206 207 regulator-name = "VREG_RTMR0_1P15"; 208 209 regulator-min-microvolt = <1150000>; 210 regulator-max-microvolt = <1150000>; 211 212 gpio = <&pmc8380_5_gpios 8 GPIO_ACTIVE_HIGH>; 213 enable-active-high; 214 215 pinctrl-0 = <&rtmr0_1p15_reg_en>; 216 pinctrl-names = "default"; 217 218 regulator-boot-on; 219 }; 220 221 vreg_rtmr0_1p8: regulator-rtmr0-1p8 { 222 compatible = "regulator-fixed"; 223 224 regulator-name = "VREG_RTMR0_1P8"; 225 226 regulator-min-microvolt = <1800000>; 227 regulator-max-microvolt = <1800000>; 228 229 gpio = <&pm8550ve_9_gpios 8 GPIO_ACTIVE_HIGH>; 230 enable-active-high; 231 232 pinctrl-0 = <&rtmr0_1p8_reg_en>; 233 pinctrl-names = "default"; 234 235 regulator-boot-on; 236 }; 237 238 vreg_rtmr0_3p3: regulator-rtmr0-3p3 { 239 compatible = "regulator-fixed"; 240 241 regulator-name = "VREG_RTMR0_3P3"; 242 243 regulator-min-microvolt = <3300000>; 244 regulator-max-microvolt = <3300000>; 245 246 gpio = <&pm8550_gpios 11 GPIO_ACTIVE_HIGH>; 247 enable-active-high; 248 249 pinctrl-0 = <&rtmr0_3p3_reg_en>; 250 pinctrl-names = "default"; 251 252 regulator-boot-on; 253 }; 254 255 vreg_rtmr1_1p15: regulator-rtmr1-1p15 { 256 compatible = "regulator-fixed"; 257 258 regulator-name = "VREG_RTMR1_1P15"; 259 260 regulator-min-microvolt = <1150000>; 261 regulator-max-microvolt = <1150000>; 262 263 gpio = <&tlmm 188 GPIO_ACTIVE_HIGH>; 264 enable-active-high; 265 266 pinctrl-0 = <&rtmr1_1p15_reg_en>; 267 pinctrl-names = "default"; 268 269 regulator-boot-on; 270 }; 271 272 vreg_rtmr1_1p8: regulator-rtmr1-1p8 { 273 compatible = "regulator-fixed"; 274 275 regulator-name = "VREG_RTMR1_1P8"; 276 277 regulator-min-microvolt = <1800000>; 278 regulator-max-microvolt = <1800000>; 279 280 gpio = <&tlmm 175 GPIO_ACTIVE_HIGH>; 281 enable-active-high; 282 283 pinctrl-0 = <&rtmr1_1p8_reg_en>; 284 pinctrl-names = "default"; 285 286 regulator-boot-on; 287 }; 288 289 vreg_rtmr1_3p3: regulator-rtmr1-3p3 { 290 compatible = "regulator-fixed"; 291 292 regulator-name = "VREG_RTMR1_3P3"; 293 294 regulator-min-microvolt = <3300000>; 295 regulator-max-microvolt = <3300000>; 296 297 gpio = <&tlmm 186 GPIO_ACTIVE_HIGH>; 298 enable-active-high; 299 300 pinctrl-0 = <&rtmr1_3p3_reg_en>; 301 pinctrl-names = "default"; 302 303 regulator-boot-on; 304 }; 305 306 307 vreg_nvme: regulator-nvme { 308 compatible = "regulator-fixed"; 309 310 regulator-name = "VREG_NVME_3P3"; 311 regulator-min-microvolt = <3300000>; 312 regulator-max-microvolt = <3300000>; 313 314 gpio = <&tlmm 18 GPIO_ACTIVE_HIGH>; 315 enable-active-high; 316 317 pinctrl-0 = <&nvme_reg_en>; 318 pinctrl-names = "default"; 319 320 regulator-boot-on; 321 }; 322 323 vph_pwr: regulator-vph-pwr { 324 compatible = "regulator-fixed"; 325 326 regulator-name = "vph_pwr"; 327 regulator-min-microvolt = <3700000>; 328 regulator-max-microvolt = <3700000>; 329 330 regulator-always-on; 331 regulator-boot-on; 332 }; 333 334 vreg_wcn_0p95: regulator-wcn-0p95 { 335 compatible = "regulator-fixed"; 336 337 regulator-name = "VREG_WCN_0P95"; 338 regulator-min-microvolt = <950000>; 339 regulator-max-microvolt = <950000>; 340 341 vin-supply = <&vreg_wcn_3p3>; 342 }; 343 344 vreg_wcn_1p9: regulator-wcn-1p9 { 345 compatible = "regulator-fixed"; 346 347 regulator-name = "VREG_WCN_1P9"; 348 regulator-min-microvolt = <1900000>; 349 regulator-max-microvolt = <1900000>; 350 351 vin-supply = <&vreg_wcn_3p3>; 352 }; 353 354 vreg_wcn_3p3: regulator-wcn-3p3 { 355 compatible = "regulator-fixed"; 356 357 regulator-name = "VREG_WCN_3P3"; 358 regulator-min-microvolt = <3300000>; 359 regulator-max-microvolt = <3300000>; 360 361 gpio = <&tlmm 214 GPIO_ACTIVE_HIGH>; 362 enable-active-high; 363 364 pinctrl-0 = <&wcn_sw_en>; 365 pinctrl-names = "default"; 366 367 regulator-boot-on; 368 }; 369 370 sound { 371 compatible = "qcom,x1e80100-sndcard"; 372 model = "X1E80100-Romulus"; 373 audio-routing = "SpkrLeft IN", "WSA WSA_SPK1 OUT", 374 "SpkrRight IN", "WSA WSA_SPK2 OUT", 375 "IN1_HPHL", "HPHL_OUT", 376 "IN2_HPHR", "HPHR_OUT", 377 "AMIC2", "MIC BIAS2", 378 "VA DMIC0", "MIC BIAS3", 379 "VA DMIC1", "MIC BIAS3", 380 "VA DMIC0", "VA MIC BIAS3", 381 "VA DMIC1", "VA MIC BIAS3", 382 "TX SWR_INPUT1", "ADC2_OUTPUT"; 383 384 va-dai-link { 385 link-name = "VA Capture"; 386 387 cpu { 388 sound-dai = <&q6apmbedai VA_CODEC_DMA_TX_0>; 389 }; 390 391 codec { 392 sound-dai = <&lpass_vamacro 0>; 393 }; 394 395 platform { 396 sound-dai = <&q6apm>; 397 }; 398 }; 399 400 wcd-capture-dai-link { 401 link-name = "WCD Capture"; 402 403 cpu { 404 sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>; 405 }; 406 407 codec { 408 sound-dai = <&wcd938x 1>, <&swr2 1>, <&lpass_txmacro 0>; 409 }; 410 411 platform { 412 sound-dai = <&q6apm>; 413 }; 414 }; 415 416 wcd-playback-dai-link { 417 link-name = "WCD Playback"; 418 419 cpu { 420 sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>; 421 }; 422 423 codec { 424 sound-dai = <&wcd938x 0>, <&swr1 0>, <&lpass_rxmacro 0>; 425 }; 426 427 platform { 428 sound-dai = <&q6apm>; 429 }; 430 }; 431 432 wsa-dai-link { 433 link-name = "WSA Playback"; 434 435 cpu { 436 sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>; 437 }; 438 439 codec { 440 sound-dai = <&left_spkr>, <&right_spkr>, 441 <&swr0 0>, <&lpass_wsamacro 0>; 442 }; 443 444 platform { 445 sound-dai = <&q6apm>; 446 }; 447 }; 448 }; 449 450 wcn7850-pmu { 451 compatible = "qcom,wcn7850-pmu"; 452 453 vdd-supply = <&vreg_wcn_0p95>; 454 vddio-supply = <&vreg_l15b>; 455 vddaon-supply = <&vreg_wcn_0p95>; 456 vdddig-supply = <&vreg_wcn_0p95>; 457 vddrfa1p2-supply = <&vreg_wcn_1p9>; 458 vddrfa1p8-supply = <&vreg_wcn_1p9>; 459 460 wlan-enable-gpios = <&tlmm 117 GPIO_ACTIVE_HIGH>; 461 bt-enable-gpios = <&tlmm 116 GPIO_ACTIVE_HIGH>; 462 463 pinctrl-0 = <&wcn_wlan_bt_en>; 464 pinctrl-names = "default"; 465 466 regulators { 467 vreg_pmu_rfa_cmn: ldo0 { 468 regulator-name = "vreg_pmu_rfa_cmn"; 469 }; 470 471 vreg_pmu_aon_0p59: ldo1 { 472 regulator-name = "vreg_pmu_aon_0p59"; 473 }; 474 475 vreg_pmu_wlcx_0p8: ldo2 { 476 regulator-name = "vreg_pmu_wlcx_0p8"; 477 }; 478 479 vreg_pmu_wlmx_0p85: ldo3 { 480 regulator-name = "vreg_pmu_wlmx_0p85"; 481 }; 482 483 vreg_pmu_btcmx_0p85: ldo4 { 484 regulator-name = "vreg_pmu_btcmx_0p85"; 485 }; 486 487 vreg_pmu_rfa_0p8: ldo5 { 488 regulator-name = "vreg_pmu_rfa_0p8"; 489 }; 490 491 vreg_pmu_rfa_1p2: ldo6 { 492 regulator-name = "vreg_pmu_rfa_1p2"; 493 }; 494 495 vreg_pmu_rfa_1p8: ldo7 { 496 regulator-name = "vreg_pmu_rfa_1p8"; 497 }; 498 499 vreg_pmu_pcie_0p9: ldo8 { 500 regulator-name = "vreg_pmu_pcie_0p9"; 501 }; 502 503 vreg_pmu_pcie_1p8: ldo9 { 504 regulator-name = "vreg_pmu_pcie_1p8"; 505 }; 506 }; 507 }; 508}; 509 510&apps_rsc { 511 regulators-0 { 512 compatible = "qcom,pm8550-rpmh-regulators"; 513 qcom,pmic-id = "b"; 514 515 vdd-bob1-supply = <&vph_pwr>; 516 vdd-bob2-supply = <&vph_pwr>; 517 vdd-l1-l4-l10-supply = <&vreg_s4c>; 518 vdd-l2-l13-l14-supply = <&vreg_bob1>; 519 vdd-l5-l16-supply = <&vreg_bob1>; 520 vdd-l6-l7-supply = <&vreg_bob2>; 521 vdd-l8-l9-supply = <&vreg_bob1>; 522 vdd-l12-supply = <&vreg_s5j>; 523 vdd-l15-supply = <&vreg_s4c>; 524 vdd-l17-supply = <&vreg_bob2>; 525 526 vreg_bob1: bob1 { 527 regulator-name = "vreg_bob1"; 528 regulator-min-microvolt = <3008000>; 529 regulator-max-microvolt = <3960000>; 530 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 531 }; 532 533 vreg_bob2: bob2 { 534 regulator-name = "vreg_bob2"; 535 regulator-min-microvolt = <2504000>; 536 regulator-max-microvolt = <3008000>; 537 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 538 }; 539 540 vreg_l1b: ldo1 { 541 regulator-name = "vreg_l1b"; 542 regulator-min-microvolt = <1800000>; 543 regulator-max-microvolt = <1800000>; 544 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 545 }; 546 547 vreg_l2b: ldo2 { 548 regulator-name = "vreg_l2b"; 549 regulator-min-microvolt = <3072000>; 550 regulator-max-microvolt = <3072000>; 551 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 552 }; 553 554 vreg_l4b: ldo4 { 555 regulator-name = "vreg_l4b"; 556 regulator-min-microvolt = <1800000>; 557 regulator-max-microvolt = <1800000>; 558 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 559 }; 560 561 vreg_l5b: ldo5 { 562 regulator-name = "vreg_l5b"; 563 regulator-min-microvolt = <3000000>; 564 regulator-max-microvolt = <3000000>; 565 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 566 }; 567 568 vreg_l6b: ldo6 { 569 regulator-name = "vreg_l6b"; 570 regulator-min-microvolt = <1800000>; 571 regulator-max-microvolt = <2960000>; 572 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 573 }; 574 575 vreg_l7b: ldo7 { 576 regulator-name = "vreg_l7b"; 577 regulator-min-microvolt = <2800000>; 578 regulator-max-microvolt = <2800000>; 579 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 580 }; 581 582 vreg_l8b: ldo8 { 583 regulator-name = "vreg_l8b"; 584 regulator-min-microvolt = <3072000>; 585 regulator-max-microvolt = <3072000>; 586 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 587 }; 588 589 vreg_l9b: ldo9 { 590 regulator-name = "vreg_l9b"; 591 regulator-min-microvolt = <2960000>; 592 regulator-max-microvolt = <2960000>; 593 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 594 }; 595 596 vreg_l10b: ldo10 { 597 regulator-name = "vreg_l10b"; 598 regulator-min-microvolt = <1800000>; 599 regulator-max-microvolt = <1800000>; 600 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 601 }; 602 603 vreg_l12b: ldo12 { 604 regulator-name = "vreg_l12b"; 605 regulator-min-microvolt = <1200000>; 606 regulator-max-microvolt = <1200000>; 607 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 608 regulator-always-on; 609 }; 610 611 vreg_l13b: ldo13 { 612 regulator-name = "vreg_l13b"; 613 regulator-min-microvolt = <3072000>; 614 regulator-max-microvolt = <3072000>; 615 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 616 }; 617 618 vreg_l14b: ldo14 { 619 regulator-name = "vreg_l14b"; 620 regulator-min-microvolt = <3072000>; 621 regulator-max-microvolt = <3072000>; 622 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 623 }; 624 625 vreg_l15b: ldo15 { 626 regulator-name = "vreg_l15b"; 627 regulator-min-microvolt = <1800000>; 628 regulator-max-microvolt = <1800000>; 629 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 630 regulator-always-on; 631 }; 632 633 vreg_l16b: ldo16 { 634 regulator-name = "vreg_l16b"; 635 regulator-min-microvolt = <2912000>; 636 regulator-max-microvolt = <2912000>; 637 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 638 }; 639 640 vreg_l17b: ldo17 { 641 regulator-name = "vreg_l17b"; 642 regulator-min-microvolt = <2504000>; 643 regulator-max-microvolt = <2504000>; 644 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 645 }; 646 }; 647 648 regulators-1 { 649 compatible = "qcom,pm8550ve-rpmh-regulators"; 650 qcom,pmic-id = "c"; 651 652 vdd-l1-supply = <&vreg_s5j>; 653 vdd-l2-supply = <&vreg_s1f>; 654 vdd-l3-supply = <&vreg_s1f>; 655 vdd-s4-supply = <&vph_pwr>; 656 657 vreg_s4c: smps4 { 658 regulator-name = "vreg_s4c"; 659 regulator-min-microvolt = <1856000>; 660 regulator-max-microvolt = <2000000>; 661 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 662 }; 663 664 vreg_l1c: ldo1 { 665 regulator-name = "vreg_l1c"; 666 regulator-min-microvolt = <1200000>; 667 regulator-max-microvolt = <1200000>; 668 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 669 }; 670 671 vreg_l2c: ldo2 { 672 regulator-name = "vreg_l2c"; 673 regulator-min-microvolt = <880000>; 674 regulator-max-microvolt = <920000>; 675 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 676 }; 677 678 vreg_l3c: ldo3 { 679 regulator-name = "vreg_l3c"; 680 regulator-min-microvolt = <912000>; 681 regulator-max-microvolt = <920000>; 682 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 683 }; 684 }; 685 686 regulators-2 { 687 compatible = "qcom,pmc8380-rpmh-regulators"; 688 qcom,pmic-id = "d"; 689 690 vdd-l1-supply = <&vreg_s1f>; 691 vdd-l2-supply = <&vreg_s1f>; 692 vdd-l3-supply = <&vreg_s4c>; 693 vdd-s1-supply = <&vph_pwr>; 694 695 vreg_l1d: ldo1 { 696 regulator-name = "vreg_l1d"; 697 regulator-min-microvolt = <880000>; 698 regulator-max-microvolt = <920000>; 699 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 700 }; 701 702 vreg_l2d: ldo2 { 703 regulator-name = "vreg_l2d"; 704 regulator-min-microvolt = <912000>; 705 regulator-max-microvolt = <920000>; 706 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 707 }; 708 709 vreg_l3d: ldo3 { 710 regulator-name = "vreg_l3d"; 711 regulator-min-microvolt = <1800000>; 712 regulator-max-microvolt = <1800000>; 713 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 714 }; 715 }; 716 717 regulators-3 { 718 compatible = "qcom,pmc8380-rpmh-regulators"; 719 qcom,pmic-id = "e"; 720 721 vdd-l2-supply = <&vreg_s1f>; 722 vdd-l3-supply = <&vreg_s5j>; 723 724 vreg_l2e: ldo2 { 725 regulator-name = "vreg_l2e"; 726 regulator-min-microvolt = <880000>; 727 regulator-max-microvolt = <920000>; 728 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 729 }; 730 731 vreg_l3e: ldo3 { 732 regulator-name = "vreg_l3e"; 733 regulator-min-microvolt = <1200000>; 734 regulator-max-microvolt = <1200000>; 735 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 736 }; 737 }; 738 739 regulators-4 { 740 compatible = "qcom,pmc8380-rpmh-regulators"; 741 qcom,pmic-id = "f"; 742 743 vdd-l1-supply = <&vreg_s5j>; 744 vdd-l2-supply = <&vreg_s5j>; 745 vdd-l3-supply = <&vreg_s5j>; 746 vdd-s1-supply = <&vph_pwr>; 747 748 vreg_s1f: smps1 { 749 regulator-name = "vreg_s1f"; 750 regulator-min-microvolt = <700000>; 751 regulator-max-microvolt = <1100000>; 752 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 753 }; 754 755 vreg_l1f: ldo1 { 756 regulator-name = "vreg_l1f"; 757 regulator-min-microvolt = <1024000>; 758 regulator-max-microvolt = <1024000>; 759 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 760 }; 761 762 vreg_l2f: ldo2 { 763 regulator-name = "vreg_l2f"; 764 regulator-min-microvolt = <1024000>; 765 regulator-max-microvolt = <1024000>; 766 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 767 }; 768 769 vreg_l3f: ldo3 { 770 regulator-name = "vreg_l3f"; 771 regulator-min-microvolt = <1024000>; 772 regulator-max-microvolt = <1024000>; 773 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 774 }; 775 }; 776 777 regulators-6 { 778 compatible = "qcom,pm8550ve-rpmh-regulators"; 779 qcom,pmic-id = "i"; 780 781 vdd-l1-supply = <&vreg_s4c>; 782 vdd-l2-supply = <&vreg_s5j>; 783 vdd-l3-supply = <&vreg_s1f>; 784 vdd-s1-supply = <&vph_pwr>; 785 vdd-s2-supply = <&vph_pwr>; 786 787 vreg_s1i: smps1 { 788 regulator-name = "vreg_s1i"; 789 regulator-min-microvolt = <900000>; 790 regulator-max-microvolt = <920000>; 791 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 792 }; 793 794 vreg_s2i: smps2 { 795 regulator-name = "vreg_s2i"; 796 regulator-min-microvolt = <1000000>; 797 regulator-max-microvolt = <1100000>; 798 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 799 }; 800 801 vreg_l1i: ldo1 { 802 regulator-name = "vreg_l1i"; 803 regulator-min-microvolt = <1800000>; 804 regulator-max-microvolt = <1800000>; 805 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 806 }; 807 808 vreg_l2i: ldo2 { 809 regulator-name = "vreg_l2i"; 810 regulator-min-microvolt = <1200000>; 811 regulator-max-microvolt = <1200000>; 812 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 813 }; 814 815 vreg_l3i: ldo3 { 816 regulator-name = "vreg_l3i"; 817 regulator-min-microvolt = <880000>; 818 regulator-max-microvolt = <920000>; 819 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 820 }; 821 }; 822 823 regulators-7 { 824 compatible = "qcom,pm8550ve-rpmh-regulators"; 825 qcom,pmic-id = "j"; 826 827 vdd-l1-supply = <&vreg_s1f>; 828 vdd-l2-supply = <&vreg_s5j>; 829 vdd-l3-supply = <&vreg_s1f>; 830 vdd-s5-supply = <&vph_pwr>; 831 832 vreg_s5j: smps5 { 833 regulator-name = "vreg_s5j"; 834 regulator-min-microvolt = <1256000>; 835 regulator-max-microvolt = <1304000>; 836 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 837 }; 838 839 vreg_l1j: ldo1 { 840 regulator-name = "vreg_l1j"; 841 regulator-min-microvolt = <912000>; 842 regulator-max-microvolt = <920000>; 843 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 844 }; 845 846 vreg_l2j: ldo2 { 847 regulator-name = "vreg_l2j"; 848 regulator-min-microvolt = <1256000>; 849 regulator-max-microvolt = <1256000>; 850 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 851 }; 852 853 vreg_l3j: ldo3 { 854 regulator-name = "vreg_l3j"; 855 regulator-min-microvolt = <880000>; 856 regulator-max-microvolt = <920000>; 857 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 858 }; 859 }; 860}; 861 862&gpu { 863 status = "okay"; 864}; 865 866&gpu_zap_shader { 867 memory-region = <&gpu_microcode_mem>; 868 firmware-name = "qcom/x1e80100/microsoft/qcdxkmsuc8380.mbn"; 869}; 870 871&i2c0 { 872 clock-frequency = <100000>; 873 874 status = "okay"; 875 876 /* Something @39, @3e, @44 */ 877}; 878 879&i2c3 { 880 clock-frequency = <400000>; 881 882 status = "okay"; 883 884 /* Left-side rear port */ 885 typec-mux@8 { 886 compatible = "parade,ps8830"; 887 reg = <0x8>; 888 889 reset-gpios = <&pm8550_gpios 10 GPIO_ACTIVE_LOW>; 890 891 clocks = <&rpmhcc RPMH_RF_CLK3>; 892 893 vdd-supply = <&vreg_rtmr0_1p15>; 894 vdd33-supply = <&vreg_rtmr0_3p3>; 895 vdd33-cap-supply = <&vreg_rtmr0_3p3>; 896 vddar-supply = <&vreg_rtmr0_1p15>; 897 vddat-supply = <&vreg_rtmr0_1p15>; 898 vddio-supply = <&vreg_rtmr0_1p8>; 899 900 pinctrl-0 = <&rtmr0_default>; 901 pinctrl-names = "default"; 902 903 retimer-switch; 904 orientation-switch; 905 906 ports { 907 #address-cells = <1>; 908 #size-cells = <0>; 909 910 port@0 { 911 reg = <0>; 912 913 retimer_ss0_ss_out: endpoint { 914 remote-endpoint = <&pmic_glink_ss0_ss_in>; 915 }; 916 }; 917 918 port@1 { 919 reg = <1>; 920 921 retimer_ss0_ss_in: endpoint { 922 remote-endpoint = <&usb_1_ss0_qmpphy_out>; 923 }; 924 }; 925 926 port@2 { 927 reg = <2>; 928 929 retimer_ss0_con_sbu_out: endpoint { 930 remote-endpoint = <&pmic_glink_ss0_con_sbu_in>; 931 }; 932 }; 933 }; 934 }; 935 936}; 937 938&i2c4 { 939 clock-frequency = <400000>; 940 941 status = "okay"; 942 943 /* Something @18, @2c, @2e */ 944}; 945 946&i2c5 { 947 clock-frequency = <400000>; 948 949 status = "okay"; 950 951 ptn3222: redriver@4f { 952 compatible = "nxp,ptn3222"; 953 reg = <0x4f>; 954 955 reset-gpios = <&tlmm 7 GPIO_ACTIVE_LOW>; 956 957 vdd3v3-supply = <&vreg_l13b>; 958 vdd1v8-supply = <&vreg_l4b>; 959 960 #phy-cells = <0>; 961 }; 962}; 963 964&i2c7 { 965 clock-frequency = <400000>; 966 967 status = "okay"; 968 969 /* Left-side front port */ 970 typec-mux@8 { 971 compatible = "parade,ps8830"; 972 reg = <0x8>; 973 974 reset-gpios = <&tlmm 176 GPIO_ACTIVE_LOW>; 975 976 clocks = <&rpmhcc RPMH_RF_CLK4>; 977 978 vdd-supply = <&vreg_rtmr1_1p15>; 979 vdd33-supply = <&vreg_rtmr1_3p3>; 980 vdd33-cap-supply = <&vreg_rtmr1_3p3>; 981 vddar-supply = <&vreg_rtmr1_1p15>; 982 vddat-supply = <&vreg_rtmr1_1p15>; 983 vddio-supply = <&vreg_rtmr1_1p8>; 984 985 retimer-switch; 986 orientation-switch; 987 988 ports { 989 #address-cells = <1>; 990 #size-cells = <0>; 991 992 port@0 { 993 reg = <0>; 994 995 retimer_ss1_ss_out: endpoint { 996 remote-endpoint = <&pmic_glink_ss1_ss_in>; 997 }; 998 }; 999 1000 port@1 { 1001 reg = <1>; 1002 1003 retimer_ss1_ss_in: endpoint { 1004 remote-endpoint = <&usb_1_ss1_qmpphy_out>; 1005 }; 1006 }; 1007 1008 port@2 { 1009 reg = <2>; 1010 1011 retimer_ss1_con_sbu_out: endpoint { 1012 remote-endpoint = <&pmic_glink_ss1_con_sbu_in>; 1013 }; 1014 }; 1015 }; 1016 }; 1017}; 1018 1019&lpass_tlmm { 1020 spkr_01_sd_n_active: spkr-01-sd-n-active-state { 1021 pins = "gpio12"; 1022 function = "gpio"; 1023 drive-strength = <16>; 1024 bias-disable; 1025 output-low; 1026 }; 1027}; 1028 1029&lpass_vamacro { 1030 qcom,dmic-sample-rate = <4800000>; 1031 1032 vdd-micb-supply = <&vreg_l1b>; 1033 1034 pinctrl-0 = <&dmic01_default>; 1035 pinctrl-names = "default"; 1036}; 1037 1038&mdss { 1039 status = "okay"; 1040}; 1041 1042&mdss_dp0 { 1043 status = "okay"; 1044}; 1045 1046&mdss_dp0_out { 1047 link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>; 1048}; 1049 1050&mdss_dp1 { 1051 status = "okay"; 1052}; 1053 1054&mdss_dp1_out { 1055 link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>; 1056}; 1057 1058&mdss_dp3 { 1059 /delete-property/ #sound-dai-cells; 1060 1061 pinctrl-0 = <&edp0_hpd_default>; 1062 pinctrl-names = "default"; 1063 1064 status = "okay"; 1065 1066 aux-bus { 1067 panel { 1068 compatible = "edp-panel"; 1069 1070 backlight = <&backlight>; 1071 power-supply = <&vreg_edp_3p3>; 1072 1073 port { 1074 edp_panel_in: endpoint { 1075 remote-endpoint = <&mdss_dp3_out>; 1076 }; 1077 }; 1078 }; 1079 }; 1080}; 1081 1082&mdss_dp3_out { 1083 data-lanes = <0 1 2 3>; 1084 link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>; 1085 1086 remote-endpoint = <&edp_panel_in>; 1087}; 1088 1089&mdss_dp3_phy { 1090 vdda-phy-supply = <&vreg_l3j>; 1091 vdda-pll-supply = <&vreg_l2j>; 1092 1093 status = "okay"; 1094}; 1095 1096&pcie3 { 1097 perst-gpios = <&tlmm 143 GPIO_ACTIVE_LOW>; 1098 wake-gpios = <&tlmm 145 GPIO_ACTIVE_HIGH>; 1099 1100 pinctrl-0 = <&pcie3_default>; 1101 pinctrl-names = "default"; 1102 1103 /* The RTS5261 chip on the other side only does Gen1x1 anyway */ 1104 max-link-speed = <1>; 1105 status = "okay"; 1106}; 1107 1108&pcie3_phy { 1109 vdda-phy-supply = <&vreg_l3c>; 1110 vdda-pll-supply = <&vreg_l3e>; 1111 1112 status = "okay"; 1113}; 1114 1115&pcie4 { 1116 status = "okay"; 1117}; 1118 1119&pcie4_phy { 1120 vdda-phy-supply = <&vreg_l3i>; 1121 vdda-pll-supply = <&vreg_l3e>; 1122 1123 status = "okay"; 1124}; 1125 1126&pcie4_port0 { 1127 wifi@0 { 1128 compatible = "pci17cb,1107"; 1129 reg = <0x10000 0x0 0x0 0x0 0x0>; 1130 1131 vddaon-supply = <&vreg_pmu_aon_0p59>; 1132 vddwlcx-supply = <&vreg_pmu_wlcx_0p8>; 1133 vddwlmx-supply = <&vreg_pmu_wlmx_0p85>; 1134 vddrfacmn-supply = <&vreg_pmu_rfa_cmn>; 1135 vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>; 1136 vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>; 1137 vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>; 1138 vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>; 1139 vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>; 1140 }; 1141}; 1142 1143&pcie6a { 1144 perst-gpios = <&tlmm 152 GPIO_ACTIVE_LOW>; 1145 wake-gpios = <&tlmm 154 GPIO_ACTIVE_LOW>; 1146 1147 vddpe-3v3-supply = <&vreg_nvme>; 1148 1149 pinctrl-0 = <&pcie6a_default>; 1150 pinctrl-names = "default"; 1151 1152 status = "okay"; 1153}; 1154 1155&pcie6a_phy { 1156 vdda-phy-supply = <&vreg_l1d>; 1157 vdda-pll-supply = <&vreg_l2j>; 1158 1159 status = "okay"; 1160}; 1161 1162&pm8550_gpios { 1163 rtmr0_default: rtmr0-reset-n-active-state { 1164 pins = "gpio10"; 1165 function = "normal"; 1166 power-source = <1>; /* 1.8V */ 1167 }; 1168 1169 rtmr0_3p3_reg_en: rtmr0-3p3-reg-en-state { 1170 pins = "gpio11"; 1171 function = "normal"; 1172 power-source = <1>; /* 1.8V */ 1173 }; 1174}; 1175 1176&pm8550ve_9_gpios { 1177 rtmr0_1p8_reg_en: rtmr0-1p8-reg-en-state { 1178 pins = "gpio8"; 1179 function = "normal"; 1180 power-source = <1>; /* 1.8V */ 1181 }; 1182}; 1183 1184&pmc8380_3_gpios { 1185 edp_bl_en: edp-bl-en-state { 1186 pins = "gpio4"; 1187 function = "normal"; 1188 power-source = <1>; /* 1.8V */ 1189 input-disable; 1190 output-enable; 1191 }; 1192}; 1193 1194&pmc8380_5_gpios { 1195 rtmr0_1p15_reg_en: rtmr0-1p15-reg-en-state { 1196 pins = "gpio8"; 1197 function = "normal"; 1198 power-source = <1>; /* 1.8V */ 1199 }; 1200}; 1201 1202&pmk8550_pwm { 1203 status = "okay"; 1204}; 1205 1206&pmk8550_gpios { 1207 edp_bl_pwm: edp-bl-pwm-state { 1208 pins = "gpio5"; 1209 function = "func3"; 1210 }; 1211}; 1212 1213&qupv3_0 { 1214 status = "okay"; 1215}; 1216 1217&qupv3_1 { 1218 status = "okay"; 1219}; 1220 1221&qupv3_2 { 1222 status = "okay"; 1223}; 1224 1225&remoteproc_adsp { 1226 firmware-name = "qcom/x1e80100/microsoft/Romulus/qcadsp8380.mbn", 1227 "qcom/x1e80100/microsoft/Romulus/adsp_dtbs.elf"; 1228 1229 status = "okay"; 1230}; 1231 1232&remoteproc_cdsp { 1233 firmware-name = "qcom/x1e80100/microsoft/Romulus/qccdsp8380.mbn", 1234 "qcom/x1e80100/microsoft/Romulus/cdsp_dtbs.elf"; 1235 1236 status = "okay"; 1237}; 1238 1239&smb2360_0 { 1240 status = "okay"; 1241}; 1242 1243&smb2360_0_eusb2_repeater { 1244 vdd18-supply = <&vreg_l3d>; 1245 vdd3-supply = <&vreg_l2b>; 1246}; 1247 1248&smb2360_1 { 1249 status = "okay"; 1250}; 1251 1252&smb2360_1_eusb2_repeater { 1253 vdd18-supply = <&vreg_l3d>; 1254 vdd3-supply = <&vreg_l14b>; 1255}; 1256 1257&smb2360_2 { 1258 status = "okay"; 1259}; 1260 1261&smb2360_2_eusb2_repeater { 1262 vdd18-supply = <&vreg_l3d>; 1263 vdd3-supply = <&vreg_l8b>; 1264}; 1265 1266&swr0 { 1267 pinctrl-0 = <&wsa_swr_active>, <&spkr_01_sd_n_active>; 1268 pinctrl-names = "default"; 1269 1270 status = "okay"; 1271 1272 /* WSA8845, Left speaker */ 1273 left_spkr: speaker@0,0 { 1274 compatible = "sdw20217020400"; 1275 reg = <0 0>; 1276 reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>; 1277 #sound-dai-cells = <0>; 1278 sound-name-prefix = "SpkrLeft"; 1279 vdd-1p8-supply = <&vreg_l15b>; 1280 vdd-io-supply = <&vreg_l12b>; 1281 qcom,port-mapping = <1 2 3 7 10 13>; 1282 }; 1283 1284 /* WSA8845, Right speaker */ 1285 right_spkr: speaker@0,1 { 1286 compatible = "sdw20217020400"; 1287 reg = <0 1>; 1288 reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>; 1289 #sound-dai-cells = <0>; 1290 sound-name-prefix = "SpkrRight"; 1291 vdd-1p8-supply = <&vreg_l15b>; 1292 vdd-io-supply = <&vreg_l12b>; 1293 qcom,port-mapping = <4 5 6 7 11 13>; 1294 }; 1295}; 1296 1297&swr1 { 1298 status = "okay"; 1299 1300 /* WCD9385 RX */ 1301 wcd_rx: codec@0,4 { 1302 compatible = "sdw20217010d00"; 1303 reg = <0 4>; 1304 qcom,rx-port-mapping = <1 2 3 4 5>; 1305 }; 1306}; 1307 1308&swr2 { 1309 status = "okay"; 1310 1311 /* WCD9385 TX */ 1312 wcd_tx: codec@0,3 { 1313 compatible = "sdw20217010d00"; 1314 reg = <0 3>; 1315 qcom,tx-port-mapping = <2 2 3 4>; 1316 }; 1317}; 1318 1319&tlmm { 1320 gpio-reserved-ranges = <44 4>, /* SPI (TPM) */ 1321 <238 1>; /* UFS Reset */ 1322 1323 hall_int_n_default: hall-int-n-state { 1324 pins = "gpio2"; 1325 function = "gpio"; 1326 bias-disable; 1327 }; 1328 1329 nvme_reg_en: nvme-reg-en-state { 1330 pins = "gpio18"; 1331 function = "gpio"; 1332 drive-strength = <2>; 1333 bias-disable; 1334 }; 1335 1336 edp_reg_en: edp-reg-en-state { 1337 pins = "gpio70"; 1338 function = "gpio"; 1339 drive-strength = <16>; 1340 bias-disable; 1341 }; 1342 1343 ssam_state: ssam-state-state { 1344 pins = "gpio91"; 1345 function = "gpio"; 1346 bias-disable; 1347 }; 1348 1349 wcn_wlan_bt_en: wcn-wlan-bt-en-state { 1350 pins = "gpio116", "gpio117"; 1351 function = "gpio"; 1352 drive-strength = <2>; 1353 bias-disable; 1354 }; 1355 1356 pcie3_default: pcie3-default-state { 1357 perst-n-pins { 1358 pins = "gpio143"; 1359 function = "gpio"; 1360 drive-strength = <2>; 1361 bias-disable; 1362 }; 1363 1364 clkreq-n-pins { 1365 pins = "gpio144"; 1366 function = "pcie3_clk"; 1367 drive-strength = <2>; 1368 bias-pull-up; 1369 }; 1370 1371 wake-n-pins { 1372 pins = "gpio145"; 1373 function = "gpio"; 1374 drive-strength = <2>; 1375 bias-pull-up; 1376 }; 1377 }; 1378 1379 pcie6a_default: pcie6a-default-state { 1380 perst-n-pins { 1381 pins = "gpio152"; 1382 function = "gpio"; 1383 drive-strength = <2>; 1384 bias-disable; 1385 }; 1386 1387 clkreq-n-pins { 1388 pins = "gpio153"; 1389 function = "pcie6a_clk"; 1390 drive-strength = <2>; 1391 bias-pull-up; 1392 }; 1393 1394 wake-n-pins { 1395 pins = "gpio154"; 1396 function = "gpio"; 1397 drive-strength = <2>; 1398 bias-pull-up; 1399 }; 1400 }; 1401 1402 rtmr1_1p8_reg_en: rtmr1-1p8-reg-en-state { 1403 pins = "gpio175"; 1404 function = "gpio"; 1405 drive-strength = <2>; 1406 bias-disable; 1407 }; 1408 1409 rtmr1_3p3_reg_en: rtmr1-3p3-reg-en-state { 1410 pins = "gpio186"; 1411 function = "gpio"; 1412 drive-strength = <2>; 1413 bias-disable; 1414 }; 1415 1416 rtmr1_1p15_reg_en: rtmr1-1p15-reg-en-state { 1417 pins = "gpio188"; 1418 function = "gpio"; 1419 drive-strength = <2>; 1420 bias-disable; 1421 }; 1422 1423 wcd_default: wcd-reset-n-active-state { 1424 pins = "gpio191"; 1425 function = "gpio"; 1426 drive-strength = <16>; 1427 bias-disable; 1428 output-low; 1429 }; 1430 1431 wcn_sw_en: wcn-sw-en-state { 1432 pins = "gpio214"; 1433 function = "gpio"; 1434 drive-strength = <2>; 1435 bias-disable; 1436 }; 1437 1438 cam_indicator_en: cam-indicator-en-state { 1439 pins = "gpio225"; 1440 function = "gpio"; 1441 drive-strength = <2>; 1442 bias-disable; 1443 }; 1444}; 1445 1446&uart2 { 1447 status = "okay"; 1448 1449 embedded-controller { 1450 compatible = "microsoft,surface-sam"; 1451 1452 interrupts-extended = <&tlmm 91 IRQ_TYPE_EDGE_RISING>; 1453 1454 current-speed = <4000000>; 1455 1456 pinctrl-0 = <&ssam_state>; 1457 pinctrl-names = "default"; 1458 }; 1459}; 1460 1461&uart14 { 1462 status = "okay"; 1463 1464 bluetooth { 1465 compatible = "qcom,wcn7850-bt"; 1466 max-speed = <3200000>; 1467 1468 vddaon-supply = <&vreg_pmu_aon_0p59>; 1469 vddwlcx-supply = <&vreg_pmu_wlcx_0p8>; 1470 vddwlmx-supply = <&vreg_pmu_wlmx_0p85>; 1471 vddrfacmn-supply = <&vreg_pmu_rfa_cmn>; 1472 vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>; 1473 vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>; 1474 vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>; 1475 }; 1476}; 1477 1478&usb_1_ss0_hsphy { 1479 vdd-supply = <&vreg_l3j>; 1480 vdda12-supply = <&vreg_l2j>; 1481 1482 phys = <&smb2360_0_eusb2_repeater>; 1483 1484 status = "okay"; 1485}; 1486 1487&usb_1_ss0_qmpphy { 1488 vdda-phy-supply = <&vreg_l2j>; 1489 vdda-pll-supply = <&vreg_l1j>; 1490 1491 status = "okay"; 1492}; 1493 1494&usb_1_ss0 { 1495 status = "okay"; 1496}; 1497 1498&usb_1_ss0_dwc3 { 1499 dr_mode = "host"; 1500}; 1501 1502&usb_1_ss0_dwc3_hs { 1503 remote-endpoint = <&pmic_glink_ss0_hs_in>; 1504}; 1505 1506&usb_1_ss0_qmpphy_out { 1507 remote-endpoint = <&retimer_ss0_ss_in>; 1508}; 1509 1510&usb_1_ss1_hsphy { 1511 vdd-supply = <&vreg_l3j>; 1512 vdda12-supply = <&vreg_l2j>; 1513 1514 phys = <&smb2360_1_eusb2_repeater>; 1515 1516 status = "okay"; 1517}; 1518 1519&usb_1_ss1_qmpphy { 1520 vdda-phy-supply = <&vreg_l2j>; 1521 vdda-pll-supply = <&vreg_l2d>; 1522 1523 status = "okay"; 1524}; 1525 1526&usb_1_ss1 { 1527 status = "okay"; 1528}; 1529 1530&usb_1_ss1_dwc3 { 1531 dr_mode = "host"; 1532}; 1533 1534&usb_1_ss1_dwc3_hs { 1535 remote-endpoint = <&pmic_glink_ss1_hs_in>; 1536}; 1537 1538&usb_1_ss1_qmpphy_out { 1539 remote-endpoint = <&retimer_ss1_ss_in>; 1540}; 1541 1542/* MP0 goes to the Surface Connector, MP1 goes to the USB-A port */ 1543&usb_mp { 1544 status = "okay"; 1545}; 1546 1547&usb_mp_hsphy0 { 1548 vdd-supply = <&vreg_l2e>; 1549 vdda12-supply = <&vreg_l2j>; 1550 1551 phys = <&smb2360_2_eusb2_repeater>; 1552 1553 status = "okay"; 1554}; 1555 1556&usb_mp_hsphy1 { 1557 vdd-supply = <&vreg_l2e>; 1558 vdda12-supply = <&vreg_l2j>; 1559 1560 phys = <&ptn3222>; 1561 1562 status = "okay"; 1563}; 1564 1565&usb_mp_qmpphy0 { 1566 vdda-phy-supply = <&vreg_l3e>; 1567 vdda-pll-supply = <&vreg_l3c>; 1568 1569 status = "okay"; 1570}; 1571 1572&usb_mp_qmpphy1 { 1573 vdda-phy-supply = <&vreg_l3e>; 1574 vdda-pll-supply = <&vreg_l3c>; 1575 1576 status = "okay"; 1577};
~/
Read-only file preview.