File Index
Files and directories
Sign in
FILE

x1e78100-lenovo-thinkpad-t14s.dtsi

File preview with syntax highlighting.

linux-6.19.14/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dtsi DEVICETREE 
   1// SPDX-License-Identifier: BSD-3-Clause
   2/*
   3 * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
   4 * Copyright (c) 2024, Linaro Limited
   5 */
   6
   7/dts-v1/;
   8
   9#include <dt-bindings/gpio/gpio.h>
  10#include <dt-bindings/input/gpio-keys.h>
  11#include <dt-bindings/input/input.h>
  12#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
  13#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
  14
  15#include "hamoa.dtsi"
  16#include "hamoa-pmics.dtsi"
  17
  18/ {
  19	model = "Lenovo ThinkPad T14s Gen 6";
  20	compatible = "lenovo,thinkpad-t14s", "qcom,x1e78100", "qcom,x1e80100";
  21	chassis-type = "laptop";
  22
  23	wcd938x: audio-codec {
  24		compatible = "qcom,wcd9385-codec";
  25
  26		pinctrl-0 = <&wcd_default>;
  27		pinctrl-names = "default";
  28
  29		qcom,micbias1-microvolt = <1800000>;
  30		qcom,micbias2-microvolt = <1800000>;
  31		qcom,micbias3-microvolt = <1800000>;
  32		qcom,micbias4-microvolt = <1800000>;
  33		qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>;
  34		qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
  35		qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
  36		qcom,rx-device = <&wcd_rx>;
  37		qcom,tx-device = <&wcd_tx>;
  38
  39		reset-gpios = <&tlmm 191 GPIO_ACTIVE_LOW>;
  40		mux-controls = <&us_euro_mux_ctrl>;
  41
  42		vdd-buck-supply = <&vreg_l15b_1p8>;
  43		vdd-rxtx-supply = <&vreg_l15b_1p8>;
  44		vdd-io-supply = <&vreg_l15b_1p8>;
  45		vdd-mic-bias-supply = <&vreg_bob1>;
  46
  47		#sound-dai-cells = <1>;
  48	};
  49
  50	gpio-keys {
  51		compatible = "gpio-keys";
  52
  53		pinctrl-0 = <&hall_int_n_default>;
  54		pinctrl-names = "default";
  55
  56		switch-lid {
  57			gpios = <&tlmm 92 GPIO_ACTIVE_LOW>;
  58			linux,input-type = <EV_SW>;
  59			linux,code = <SW_LID>;
  60			wakeup-source;
  61			wakeup-event-action = <EV_ACT_DEASSERTED>;
  62		};
  63	};
  64
  65	pmic-glink {
  66		compatible = "qcom,x1e80100-pmic-glink",
  67			     "qcom,sm8550-pmic-glink",
  68			     "qcom,pmic-glink";
  69		orientation-gpios = <&tlmm 121 GPIO_ACTIVE_HIGH>,
  70				    <&tlmm 123 GPIO_ACTIVE_HIGH>;
  71		#address-cells = <1>;
  72		#size-cells = <0>;
  73
  74		/* Display-adjacent port */
  75		connector@0 {
  76			compatible = "usb-c-connector";
  77			reg = <0>;
  78			power-role = "dual";
  79			data-role = "dual";
  80
  81			ports {
  82				#address-cells = <1>;
  83				#size-cells = <0>;
  84
  85				port@0 {
  86					reg = <0>;
  87
  88					pmic_glink_ss0_hs_in: endpoint {
  89						remote-endpoint = <&usb_1_ss0_dwc3_hs>;
  90					};
  91				};
  92
  93				port@1 {
  94					reg = <1>;
  95
  96					pmic_glink_ss0_ss_in: endpoint {
  97						remote-endpoint = <&retimer_ss0_ss_out>;
  98					};
  99				};
 100
 101				port@2 {
 102					reg = <2>;
 103
 104					pmic_glink_ss0_con_sbu_in: endpoint {
 105						remote-endpoint = <&retimer_ss0_con_sbu_out>;
 106					};
 107				};
 108			};
 109		};
 110
 111		/* User-adjacent port */
 112		connector@1 {
 113			compatible = "usb-c-connector";
 114			reg = <1>;
 115			power-role = "dual";
 116			data-role = "dual";
 117
 118			ports {
 119				#address-cells = <1>;
 120				#size-cells = <0>;
 121
 122				port@0 {
 123					reg = <0>;
 124
 125					pmic_glink_ss1_hs_in: endpoint {
 126						remote-endpoint = <&usb_1_ss1_dwc3_hs>;
 127					};
 128				};
 129
 130				port@1 {
 131					reg = <1>;
 132
 133					pmic_glink_ss1_ss_in: endpoint {
 134						remote-endpoint = <&retimer_ss1_ss_out>;
 135					};
 136				};
 137
 138				port@2 {
 139					reg = <2>;
 140
 141					pmic_glink_ss1_con_sbu_in: endpoint {
 142						remote-endpoint = <&retimer_ss1_con_sbu_out>;
 143					};
 144				};
 145			};
 146		};
 147	};
 148
 149	/* two muxes together support CTIA and OMTP switching */
 150	us_euro_mux_ctrl: mux-controller {
 151		compatible = "gpio-mux";
 152		pinctrl-0 = <&us_euro_hs_sel>;
 153		pinctrl-names = "default";
 154		mux-supply = <&vreg_l16b_2p5>;
 155		#mux-control-cells = <0>;
 156		mux-gpios = <&tlmm 68 GPIO_ACTIVE_HIGH>;
 157	};
 158
 159	reserved-memory {
 160		linux,cma {
 161			compatible = "shared-dma-pool";
 162			size = <0x0 0x8000000>;
 163			reusable;
 164			linux,cma-default;
 165		};
 166	};
 167
 168	vreg_edp_3p3: regulator-edp-3p3 {
 169		compatible = "regulator-fixed";
 170
 171		regulator-name = "VREG_EDP_3P3";
 172		regulator-min-microvolt = <3300000>;
 173		regulator-max-microvolt = <3300000>;
 174
 175		gpio = <&tlmm 70 GPIO_ACTIVE_HIGH>;
 176		enable-active-high;
 177
 178		pinctrl-0 = <&edp_reg_en>;
 179		pinctrl-names = "default";
 180
 181		regulator-boot-on;
 182	};
 183
 184	vreg_misc_3p3: regulator-misc-3p3 {
 185		compatible = "regulator-fixed";
 186
 187		regulator-name = "VCC3B";
 188		regulator-min-microvolt = <3300000>;
 189		regulator-max-microvolt = <3300000>;
 190
 191		gpio = <&pm8550ve_8_gpios 6 GPIO_ACTIVE_HIGH>;
 192		enable-active-high;
 193
 194		pinctrl-0 = <&misc_3p3_reg_en>;
 195		pinctrl-names = "default";
 196
 197		regulator-boot-on;
 198		regulator-always-on;
 199	};
 200
 201	vreg_nvme: regulator-nvme {
 202		compatible = "regulator-fixed";
 203
 204		regulator-name = "VREG_NVME_3P3";
 205		regulator-min-microvolt = <3300000>;
 206		regulator-max-microvolt = <3300000>;
 207
 208		gpio = <&tlmm 18 GPIO_ACTIVE_HIGH>;
 209		enable-active-high;
 210
 211		pinctrl-0 = <&nvme_reg_en>;
 212		pinctrl-names = "default";
 213
 214		regulator-boot-on;
 215	};
 216
 217	vreg_rtmr0_1p15: regulator-rtmr0-1p15 {
 218		compatible = "regulator-fixed";
 219
 220		regulator-name = "VREG_RTMR0_1P15";
 221		regulator-min-microvolt = <1150000>;
 222		regulator-max-microvolt = <1150000>;
 223
 224		gpio = <&pmc8380_5_gpios 8 GPIO_ACTIVE_HIGH>;
 225		enable-active-high;
 226
 227		pinctrl-0 = <&usb0_pwr_1p15_reg_en>;
 228		pinctrl-names = "default";
 229
 230		regulator-boot-on;
 231	};
 232
 233	vreg_rtmr0_1p8: regulator-rtmr0-1p8 {
 234		compatible = "regulator-fixed";
 235
 236		regulator-name = "VREG_RTMR0_1P8";
 237		regulator-min-microvolt = <1800000>;
 238		regulator-max-microvolt = <1800000>;
 239
 240		gpio = <&pm8550ve_9_gpios 8 GPIO_ACTIVE_HIGH>;
 241		enable-active-high;
 242
 243		pinctrl-0 = <&usb0_1p8_reg_en>;
 244		pinctrl-names = "default";
 245
 246		regulator-boot-on;
 247	};
 248
 249	vreg_rtmr0_3p3: regulator-rtmr0-3p3 {
 250		compatible = "regulator-fixed";
 251
 252		regulator-name = "VREG_RTMR0_3P3";
 253		regulator-min-microvolt = <3300000>;
 254		regulator-max-microvolt = <3300000>;
 255
 256		gpio = <&pm8550_gpios 11 GPIO_ACTIVE_HIGH>;
 257		enable-active-high;
 258
 259		pinctrl-0 = <&usb0_3p3_reg_en>;
 260		pinctrl-names = "default";
 261
 262		regulator-boot-on;
 263	};
 264
 265	vreg_rtmr1_1p15: regulator-rtmr1-1p15 {
 266		compatible = "regulator-fixed";
 267
 268		regulator-name = "VREG_RTMR1_1P15";
 269		regulator-min-microvolt = <1150000>;
 270		regulator-max-microvolt = <1150000>;
 271
 272		gpio = <&tlmm 188 GPIO_ACTIVE_HIGH>;
 273		enable-active-high;
 274
 275		pinctrl-0 = <&usb1_pwr_1p15_reg_en>;
 276		pinctrl-names = "default";
 277
 278		regulator-boot-on;
 279	};
 280
 281	vreg_rtmr1_1p8: regulator-rtmr1-1p8 {
 282		compatible = "regulator-fixed";
 283
 284		regulator-name = "VREG_RTMR1_1P8";
 285		regulator-min-microvolt = <1800000>;
 286		regulator-max-microvolt = <1800000>;
 287
 288		gpio = <&tlmm 175 GPIO_ACTIVE_HIGH>;
 289		enable-active-high;
 290
 291		pinctrl-0 = <&usb1_pwr_1p8_reg_en>;
 292		pinctrl-names = "default";
 293
 294		regulator-boot-on;
 295	};
 296
 297	vreg_rtmr1_3p3: regulator-rtmr1-3p3 {
 298		compatible = "regulator-fixed";
 299
 300		regulator-name = "VREG_RTMR1_3P3";
 301		regulator-min-microvolt = <3300000>;
 302		regulator-max-microvolt = <3300000>;
 303
 304		gpio = <&tlmm 186 GPIO_ACTIVE_HIGH>;
 305		enable-active-high;
 306
 307		pinctrl-0 = <&usb1_pwr_3p3_reg_en>;
 308		pinctrl-names = "default";
 309
 310		regulator-boot-on;
 311	};
 312
 313	vph_pwr: regulator-vph-pwr {
 314		compatible = "regulator-fixed";
 315
 316		regulator-name = "vph_pwr";
 317		regulator-min-microvolt = <3700000>;
 318		regulator-max-microvolt = <3700000>;
 319
 320		regulator-always-on;
 321		regulator-boot-on;
 322	};
 323
 324	vreg_wwan: regulator-wwan {
 325		compatible = "regulator-fixed";
 326
 327		regulator-name = "VCC3B_WAN_RCM";
 328		regulator-min-microvolt = <3300000>;
 329		regulator-max-microvolt = <3300000>;
 330
 331		gpio = <&tlmm 221 GPIO_ACTIVE_HIGH>;
 332		enable-active-high;
 333
 334		pinctrl-0 = <&wwan_sw_en>;
 335		pinctrl-names = "default";
 336
 337		regulator-boot-on;
 338	};
 339
 340	sound {
 341		compatible = "qcom,x1e80100-sndcard";
 342		model = "X1E80100-LENOVO-Thinkpad-T14s";
 343		audio-routing = "SpkrLeft IN", "WSA WSA_SPK1 OUT",
 344				"SpkrRight IN", "WSA WSA_SPK2 OUT",
 345				"IN1_HPHL", "HPHL_OUT",
 346				"IN2_HPHR", "HPHR_OUT",
 347				"AMIC2", "MIC BIAS2",
 348				"VA DMIC0", "MIC BIAS1",
 349				"VA DMIC1", "MIC BIAS1",
 350				"VA DMIC0", "VA MIC BIAS1",
 351				"VA DMIC1", "VA MIC BIAS1",
 352				"TX SWR_INPUT1", "ADC2_OUTPUT";
 353
 354		wcd-playback-dai-link {
 355			link-name = "WCD Playback";
 356
 357			cpu {
 358				sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>;
 359			};
 360
 361			codec {
 362				sound-dai = <&wcd938x 0>, <&swr1 0>, <&lpass_rxmacro 0>;
 363			};
 364
 365			platform {
 366				sound-dai = <&q6apm>;
 367			};
 368		};
 369
 370		wcd-capture-dai-link {
 371			link-name = "WCD Capture";
 372
 373			cpu {
 374				sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>;
 375			};
 376
 377			codec {
 378				sound-dai = <&wcd938x 1>, <&swr2 1>, <&lpass_txmacro 0>;
 379			};
 380
 381			platform {
 382				sound-dai = <&q6apm>;
 383			};
 384		};
 385
 386		wsa-dai-link {
 387			link-name = "WSA Playback";
 388
 389			cpu {
 390				sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>;
 391			};
 392
 393			codec {
 394				sound-dai = <&left_spkr>, <&right_spkr>, <&swr0 0>, <&lpass_wsamacro 0>;
 395			};
 396
 397			platform {
 398				sound-dai = <&q6apm>;
 399			};
 400		};
 401
 402		va-dai-link {
 403			link-name = "VA Capture";
 404
 405			cpu {
 406				sound-dai = <&q6apmbedai VA_CODEC_DMA_TX_0>;
 407			};
 408
 409			codec {
 410				sound-dai = <&lpass_vamacro 0>;
 411			};
 412
 413			platform {
 414				sound-dai = <&q6apm>;
 415			};
 416		};
 417	};
 418};
 419
 420&apps_rsc {
 421	regulators-0 {
 422		compatible = "qcom,pm8550-rpmh-regulators";
 423		qcom,pmic-id = "b";
 424
 425		vdd-bob1-supply = <&vph_pwr>;
 426		vdd-bob2-supply = <&vph_pwr>;
 427		vdd-l1-l4-l10-supply = <&vreg_s4c_1p8>;
 428		vdd-l2-l13-l14-supply = <&vreg_bob1>;
 429		vdd-l5-l16-supply = <&vreg_bob1>;
 430		vdd-l6-l7-supply = <&vreg_bob2>;
 431		vdd-l8-l9-supply = <&vreg_bob1>;
 432		vdd-l12-supply = <&vreg_s5j_1p2>;
 433		vdd-l15-supply = <&vreg_s4c_1p8>;
 434		vdd-l17-supply = <&vreg_bob2>;
 435
 436		vreg_bob1: bob1 {
 437			regulator-name = "vreg_bob1";
 438			regulator-min-microvolt = <3008000>;
 439			regulator-max-microvolt = <3960000>;
 440			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 441		};
 442
 443		vreg_bob2: bob2 {
 444			regulator-name = "vreg_bob2";
 445			regulator-min-microvolt = <2504000>;
 446			regulator-max-microvolt = <3008000>;
 447			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 448		};
 449
 450		vreg_l1b_1p8: ldo1 {
 451			regulator-name = "vreg_l1b_1p8";
 452			regulator-min-microvolt = <1800000>;
 453			regulator-max-microvolt = <1800000>;
 454			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 455		};
 456
 457		vreg_l2b_3p0: ldo2 {
 458			regulator-name = "vreg_l2b_3p0";
 459			regulator-min-microvolt = <3072000>;
 460			regulator-max-microvolt = <3072000>;
 461			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 462		};
 463
 464		vreg_l4b_1p8: ldo4 {
 465			regulator-name = "vreg_l4b_1p8";
 466			regulator-min-microvolt = <1800000>;
 467			regulator-max-microvolt = <1800000>;
 468			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 469		};
 470
 471		vreg_l6b_1p8: ldo6 {
 472			regulator-name = "vreg_l6b_1p8";
 473			regulator-min-microvolt = <1800000>;
 474			regulator-max-microvolt = <2960000>;
 475			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 476		};
 477
 478		vreg_l8b_3p0: ldo8 {
 479			regulator-name = "vreg_l8b_3p0";
 480			regulator-min-microvolt = <3072000>;
 481			regulator-max-microvolt = <3072000>;
 482			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 483		};
 484
 485		vreg_l9b_2p9: ldo9 {
 486			regulator-name = "vreg_l9b_2p9";
 487			regulator-min-microvolt = <2960000>;
 488			regulator-max-microvolt = <2960000>;
 489			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 490		};
 491
 492		vreg_l10b_1p8: ldo10 {
 493			regulator-name = "vreg_l10b_1p8";
 494			regulator-min-microvolt = <1800000>;
 495			regulator-max-microvolt = <1800000>;
 496			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 497		};
 498
 499		vreg_l12b_1p2: ldo12 {
 500			regulator-name = "vreg_l12b_1p2";
 501			regulator-min-microvolt = <1200000>;
 502			regulator-max-microvolt = <1200000>;
 503			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 504			regulator-always-on;
 505		};
 506
 507		vreg_l13b_3p0: ldo13 {
 508			regulator-name = "vreg_l13b_3p0";
 509			regulator-min-microvolt = <3072000>;
 510			regulator-max-microvolt = <3072000>;
 511			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 512		};
 513
 514		vreg_l14b_3p0: ldo14 {
 515			regulator-name = "vreg_l14b_3p0";
 516			regulator-min-microvolt = <3072000>;
 517			regulator-max-microvolt = <3072000>;
 518			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 519		};
 520
 521		vreg_l15b_1p8: ldo15 {
 522			regulator-name = "vreg_l15b_1p8";
 523			regulator-min-microvolt = <1800000>;
 524			regulator-max-microvolt = <1800000>;
 525			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 526			regulator-always-on;
 527		};
 528
 529		vreg_l16b_2p5: ldo16 {
 530			regulator-name = "vreg_l16b_2p5";
 531			regulator-min-microvolt = <2504000>;
 532			regulator-max-microvolt = <2504000>;
 533			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 534		};
 535
 536		vreg_l17b_2p5: ldo17 {
 537			regulator-name = "vreg_l17b_2p5";
 538			regulator-min-microvolt = <2504000>;
 539			regulator-max-microvolt = <2504000>;
 540			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 541		};
 542	};
 543
 544	regulators-1 {
 545		compatible = "qcom,pm8550ve-rpmh-regulators";
 546		qcom,pmic-id = "c";
 547
 548		vdd-l1-supply = <&vreg_s5j_1p2>;
 549		vdd-l2-supply = <&vreg_s1f_0p7>;
 550		vdd-l3-supply = <&vreg_s1f_0p7>;
 551		vdd-s4-supply = <&vph_pwr>;
 552
 553		vreg_s4c_1p8: smps4 {
 554			regulator-name = "vreg_s4c_1p8";
 555			regulator-min-microvolt = <1856000>;
 556			regulator-max-microvolt = <2000000>;
 557			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 558		};
 559
 560		vreg_l1c_1p2: ldo1 {
 561			regulator-name = "vreg_l1c_1p2";
 562			regulator-min-microvolt = <1200000>;
 563			regulator-max-microvolt = <1200000>;
 564			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 565		};
 566
 567		vreg_l2c_0p8: ldo2 {
 568			regulator-name = "vreg_l2c_0p8";
 569			regulator-min-microvolt = <880000>;
 570			regulator-max-microvolt = <880000>;
 571			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 572		};
 573
 574		vreg_l3c_0p8: ldo3 {
 575			regulator-name = "vreg_l3c_0p8";
 576			regulator-min-microvolt = <912000>;
 577			regulator-max-microvolt = <912000>;
 578			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 579		};
 580	};
 581
 582	regulators-2 {
 583		compatible = "qcom,pmc8380-rpmh-regulators";
 584		qcom,pmic-id = "d";
 585
 586		vdd-l1-supply = <&vreg_s1f_0p7>;
 587		vdd-l2-supply = <&vreg_s1f_0p7>;
 588		vdd-l3-supply = <&vreg_s4c_1p8>;
 589		vdd-s1-supply = <&vph_pwr>;
 590
 591		vreg_l1d_0p8: ldo1 {
 592			regulator-name = "vreg_l1d_0p8";
 593			regulator-min-microvolt = <880000>;
 594			regulator-max-microvolt = <880000>;
 595			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 596		};
 597
 598		vreg_l2d_0p9: ldo2 {
 599			regulator-name = "vreg_l2d_0p9";
 600			regulator-min-microvolt = <912000>;
 601			regulator-max-microvolt = <912000>;
 602			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 603		};
 604
 605		vreg_l3d_1p8: ldo3 {
 606			regulator-name = "vreg_l3d_1p8";
 607			regulator-min-microvolt = <1800000>;
 608			regulator-max-microvolt = <1800000>;
 609			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 610		};
 611	};
 612
 613	regulators-3 {
 614		compatible = "qcom,pmc8380-rpmh-regulators";
 615		qcom,pmic-id = "e";
 616
 617		vdd-l2-supply = <&vreg_s1f_0p7>;
 618		vdd-l3-supply = <&vreg_s5j_1p2>;
 619
 620		vreg_l2e_0p8: ldo2 {
 621			regulator-name = "vreg_l2e_0p8";
 622			regulator-min-microvolt = <880000>;
 623			regulator-max-microvolt = <880000>;
 624			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 625		};
 626
 627		vreg_l3e_1p2: ldo3 {
 628			regulator-name = "vreg_l3e_1p2";
 629			regulator-min-microvolt = <1200000>;
 630			regulator-max-microvolt = <1200000>;
 631			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 632		};
 633	};
 634
 635	regulators-4 {
 636		compatible = "qcom,pmc8380-rpmh-regulators";
 637		qcom,pmic-id = "f";
 638
 639		vdd-l1-supply = <&vreg_s5j_1p2>;
 640		vdd-l2-supply = <&vreg_s5j_1p2>;
 641		vdd-l3-supply = <&vreg_s5j_1p2>;
 642		vdd-s1-supply = <&vph_pwr>;
 643
 644		vreg_s1f_0p7: smps1 {
 645			regulator-name = "vreg_s1f_0p7";
 646			regulator-min-microvolt = <700000>;
 647			regulator-max-microvolt = <1100000>;
 648			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 649		};
 650	};
 651
 652	regulators-6 {
 653		compatible = "qcom,pm8550ve-rpmh-regulators";
 654		qcom,pmic-id = "i";
 655
 656		vdd-l1-supply = <&vreg_s4c_1p8>;
 657		vdd-l2-supply = <&vreg_s5j_1p2>;
 658		vdd-l3-supply = <&vreg_s1f_0p7>;
 659		vdd-s1-supply = <&vph_pwr>;
 660		vdd-s2-supply = <&vph_pwr>;
 661
 662		vreg_l1i_1p8: ldo1 {
 663			regulator-name = "vreg_l1i_1p8";
 664			regulator-min-microvolt = <1800000>;
 665			regulator-max-microvolt = <1800000>;
 666			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 667		};
 668
 669		vreg_l2i_1p2: ldo2 {
 670			regulator-name = "vreg_l2i_1p2";
 671			regulator-min-microvolt = <1200000>;
 672			regulator-max-microvolt = <1200000>;
 673			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 674		};
 675
 676		vreg_l3i_0p8: ldo3 {
 677			regulator-name = "vreg_l3i_0p8";
 678			regulator-min-microvolt = <880000>;
 679			regulator-max-microvolt = <880000>;
 680			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 681		};
 682	};
 683
 684	regulators-7 {
 685		compatible = "qcom,pm8550ve-rpmh-regulators";
 686		qcom,pmic-id = "j";
 687
 688		vdd-l1-supply = <&vreg_s1f_0p7>;
 689		vdd-l2-supply = <&vreg_s5j_1p2>;
 690		vdd-l3-supply = <&vreg_s1f_0p7>;
 691		vdd-s5-supply = <&vph_pwr>;
 692
 693		vreg_s5j_1p2: smps5 {
 694			regulator-name = "vreg_s5j_1p2";
 695			regulator-min-microvolt = <1256000>;
 696			regulator-max-microvolt = <1304000>;
 697			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 698		};
 699
 700		vreg_l1j_0p8: ldo1 {
 701			regulator-name = "vreg_l1j_0p8";
 702			regulator-min-microvolt = <912000>;
 703			regulator-max-microvolt = <912000>;
 704			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 705		};
 706
 707		vreg_l2j_1p2: ldo2 {
 708			regulator-name = "vreg_l2j_1p2";
 709			regulator-min-microvolt = <1256000>;
 710			regulator-max-microvolt = <1256000>;
 711			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 712		};
 713
 714		vreg_l3j_0p8: ldo3 {
 715			regulator-name = "vreg_l3j_0p8";
 716			regulator-min-microvolt = <880000>;
 717			regulator-max-microvolt = <880000>;
 718			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 719		};
 720	};
 721};
 722
 723&gpu {
 724	status = "okay";
 725};
 726
 727&gpu_zap_shader {
 728	firmware-name = "qcom/x1e80100/LENOVO/21N1/qcdxkmsuc8380.mbn";
 729};
 730
 731&i2c0 {
 732	clock-frequency = <400000>;
 733
 734	pinctrl-0 = <&qup_i2c0_data_clk>, <&tpad_default>;
 735	pinctrl-names = "default";
 736
 737	status = "okay";
 738
 739	/* ELAN06E2 or ELAN06E3 */
 740	touchpad@15 {
 741		compatible = "hid-over-i2c";
 742		reg = <0x15>;
 743
 744		hid-descr-addr = <0x1>;
 745		interrupts-extended = <&tlmm 3 IRQ_TYPE_LEVEL_LOW>;
 746
 747		vdd-supply = <&vreg_misc_3p3>;
 748		vddl-supply = <&vreg_l12b_1p2>;
 749
 750		wakeup-source;
 751	};
 752
 753	/* SYNA8022 or SYNA8024 */
 754	touchpad@2c {
 755		compatible = "hid-over-i2c";
 756		reg = <0x2c>;
 757
 758		hid-descr-addr = <0x20>;
 759		interrupts-extended = <&tlmm 3 IRQ_TYPE_LEVEL_LOW>;
 760
 761		vdd-supply = <&vreg_misc_3p3>;
 762		vddl-supply = <&vreg_l12b_1p2>;
 763
 764		wakeup-source;
 765	};
 766
 767	/* ELAN06F1 or SYNA06F2 */
 768	keyboard@3a {
 769		compatible = "hid-over-i2c";
 770		reg = <0x3a>;
 771
 772		hid-descr-addr = <0x1>;
 773		interrupts-extended = <&tlmm 67 IRQ_TYPE_LEVEL_LOW>;
 774
 775		vdd-supply = <&vreg_misc_3p3>;
 776		vddl-supply = <&vreg_l15b_1p8>;
 777
 778		pinctrl-0 = <&kybd_default>;
 779		pinctrl-names = "default";
 780
 781		wakeup-source;
 782	};
 783};
 784
 785&i2c3 {
 786	clock-frequency = <400000>;
 787
 788	status = "okay";
 789
 790	typec-mux@8 {
 791		compatible = "parade,ps8830";
 792		reg = <0x08>;
 793
 794		clocks = <&rpmhcc RPMH_RF_CLK3>;
 795
 796		vdd-supply = <&vreg_rtmr0_1p15>;
 797		vdd33-supply = <&vreg_rtmr0_3p3>;
 798		vdd33-cap-supply = <&vreg_rtmr0_3p3>;
 799		vddar-supply = <&vreg_rtmr0_1p15>;
 800		vddat-supply = <&vreg_rtmr0_1p15>;
 801		vddio-supply = <&vreg_rtmr0_1p8>;
 802
 803		reset-gpios = <&pm8550_gpios 10 GPIO_ACTIVE_LOW>;
 804
 805		pinctrl-0 = <&rtmr0_default>;
 806		pinctrl-names = "default";
 807
 808		orientation-switch;
 809		retimer-switch;
 810
 811		ports {
 812			#address-cells = <1>;
 813			#size-cells = <0>;
 814
 815			port@0 {
 816				reg = <0>;
 817
 818				retimer_ss0_ss_out: endpoint {
 819					remote-endpoint = <&pmic_glink_ss0_ss_in>;
 820				};
 821			};
 822
 823			port@1 {
 824				reg = <1>;
 825
 826				retimer_ss0_ss_in: endpoint {
 827					remote-endpoint = <&usb_1_ss0_qmpphy_out>;
 828				};
 829			};
 830
 831			port@2 {
 832				reg = <2>;
 833
 834				retimer_ss0_con_sbu_out: endpoint {
 835					remote-endpoint = <&pmic_glink_ss0_con_sbu_in>;
 836				};
 837			};
 838		};
 839	};
 840};
 841
 842&i2c5 {
 843	clock-frequency = <400000>;
 844
 845	status = "okay";
 846
 847	eusb5_repeater: redriver@43 {
 848		compatible = "nxp,ptn3222";
 849		reg = <0x43>;
 850		#phy-cells = <0>;
 851
 852		vdd3v3-supply = <&vreg_l13b_3p0>;
 853		vdd1v8-supply = <&vreg_l4b_1p8>;
 854
 855		reset-gpios = <&tlmm 7 GPIO_ACTIVE_LOW>;
 856
 857		pinctrl-0 = <&eusb5_reset_n>;
 858		pinctrl-names = "default";
 859	};
 860
 861	eusb3_repeater: redriver@47 {
 862		compatible = "nxp,ptn3222";
 863		reg = <0x47>;
 864		#phy-cells = <0>;
 865
 866		vdd3v3-supply = <&vreg_l13b_3p0>;
 867		vdd1v8-supply = <&vreg_l4b_1p8>;
 868
 869		reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>;
 870
 871		pinctrl-0 = <&eusb3_reset_n>;
 872		pinctrl-names = "default";
 873	};
 874
 875	eusb6_repeater: redriver@4f {
 876		compatible = "nxp,ptn3222";
 877		reg = <0x4f>;
 878		#phy-cells = <0>;
 879
 880		vdd3v3-supply = <&vreg_l13b_3p0>;
 881		vdd1v8-supply = <&vreg_l4b_1p8>;
 882
 883		reset-gpios = <&tlmm 184 GPIO_ACTIVE_LOW>;
 884
 885		pinctrl-0 = <&eusb6_reset_n>;
 886		pinctrl-names = "default";
 887	};
 888};
 889
 890&i2c6 {
 891	clock-frequency = <400000>;
 892
 893	status = "okay";
 894
 895	embedded-controller@28 {
 896		compatible = "lenovo,thinkpad-t14s-ec";
 897		reg = <0x28>;
 898
 899		interrupts-extended = <&tlmm 66 IRQ_TYPE_LEVEL_LOW>;
 900
 901		pinctrl-0 = <&ec_int_n_default>;
 902		pinctrl-names = "default";
 903
 904		wakeup-source;
 905	};
 906};
 907
 908&i2c7 {
 909	clock-frequency = <400000>;
 910
 911	status = "okay";
 912
 913	typec-mux@8 {
 914		compatible = "parade,ps8830";
 915		reg = <0x8>;
 916
 917		clocks = <&rpmhcc RPMH_RF_CLK4>;
 918
 919		vdd-supply = <&vreg_rtmr1_1p15>;
 920		vdd33-supply = <&vreg_rtmr1_3p3>;
 921		vdd33-cap-supply = <&vreg_rtmr1_3p3>;
 922		vddar-supply = <&vreg_rtmr1_1p15>;
 923		vddat-supply = <&vreg_rtmr1_1p15>;
 924		vddio-supply = <&vreg_rtmr1_1p8>;
 925
 926		reset-gpios = <&tlmm 176 GPIO_ACTIVE_LOW>;
 927
 928		pinctrl-0 = <&rtmr1_default>;
 929		pinctrl-names = "default";
 930
 931		retimer-switch;
 932		orientation-switch;
 933
 934		ports {
 935			#address-cells = <1>;
 936			#size-cells = <0>;
 937
 938			port@0 {
 939				reg = <0>;
 940
 941				retimer_ss1_ss_out: endpoint {
 942					remote-endpoint = <&pmic_glink_ss1_ss_in>;
 943				};
 944			};
 945
 946			port@1 {
 947				reg = <1>;
 948
 949				retimer_ss1_ss_in: endpoint {
 950					remote-endpoint = <&usb_1_ss1_qmpphy_out>;
 951				};
 952			};
 953
 954			port@2 {
 955				reg = <2>;
 956
 957				retimer_ss1_con_sbu_out: endpoint {
 958					remote-endpoint = <&pmic_glink_ss1_con_sbu_in>;
 959				};
 960			};
 961		};
 962	};
 963};
 964
 965&i2c8 {
 966	clock-frequency = <400000>;
 967
 968	status = "okay";
 969
 970	/* ILIT2911 or GTCH1563 */
 971	touchscreen@10 {
 972		compatible = "hid-over-i2c";
 973		reg = <0x10>;
 974
 975		hid-descr-addr = <0x1>;
 976		interrupts-extended = <&tlmm 51 IRQ_TYPE_LEVEL_LOW>;
 977
 978		vdd-supply = <&vreg_misc_3p3>;
 979		vddl-supply = <&vreg_l15b_1p8>;
 980
 981		pinctrl-0 = <&ts0_default>;
 982		pinctrl-names = "default";
 983	};
 984
 985	/* TODO: second-sourced touchscreen @ 0x41 */
 986};
 987
 988&iris {
 989	firmware-name = "qcom/x1e80100/LENOVO/21N1/qcvss8380.mbn";
 990	status = "okay";
 991};
 992
 993&lpass_tlmm {
 994	spkr_01_sd_n_active: spkr-01-sd-n-active-state {
 995		pins = "gpio12";
 996		function = "gpio";
 997		drive-strength = <16>;
 998		bias-disable;
 999		output-low;
1000	};
1001};
1002
1003&lpass_vamacro {
1004	pinctrl-0 = <&dmic01_default>;
1005	pinctrl-names = "default";
1006
1007	vdd-micb-supply = <&vreg_l1b_1p8>;
1008	qcom,dmic-sample-rate = <4800000>;
1009};
1010
1011&mdss {
1012	status = "okay";
1013};
1014
1015&mdss_dp0 {
1016	status = "okay";
1017};
1018
1019&mdss_dp0_out {
1020	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
1021};
1022
1023&mdss_dp1 {
1024	status = "okay";
1025};
1026
1027&mdss_dp1_out {
1028	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
1029};
1030
1031&mdss_dp3 {
1032	/delete-property/ #sound-dai-cells;
1033
1034	pinctrl-0 = <&edp0_hpd_default>;
1035	pinctrl-names = "default";
1036
1037	status = "okay";
1038
1039	aux-bus {
1040		panel: panel {
1041			compatible = "edp-panel";
1042			power-supply = <&vreg_edp_3p3>;
1043
1044			port {
1045				edp_panel_in: endpoint {
1046					remote-endpoint = <&mdss_dp3_out>;
1047				};
1048			};
1049		};
1050	};
1051};
1052
1053&mdss_dp3_out {
1054	data-lanes = <0 1 2 3>;
1055	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
1056
1057	remote-endpoint = <&edp_panel_in>;
1058};
1059
1060&mdss_dp3_phy {
1061	vdda-phy-supply = <&vreg_l3j_0p8>;
1062	vdda-pll-supply = <&vreg_l2j_1p2>;
1063
1064	status = "okay";
1065};
1066
1067&pcie4 {
1068	perst-gpios = <&tlmm 146 GPIO_ACTIVE_LOW>;
1069	wake-gpios = <&tlmm 148 GPIO_ACTIVE_LOW>;
1070
1071	pinctrl-0 = <&pcie4_default>;
1072	pinctrl-names = "default";
1073
1074	status = "okay";
1075};
1076
1077&pcie4_phy {
1078	vdda-phy-supply = <&vreg_l3i_0p8>;
1079	vdda-pll-supply = <&vreg_l3e_1p2>;
1080
1081	status = "okay";
1082};
1083
1084&pcie5 {
1085	perst-gpios = <&tlmm 149 GPIO_ACTIVE_LOW>;
1086	wake-gpios = <&tlmm 151 GPIO_ACTIVE_LOW>;
1087
1088	vddpe-3v3-supply = <&vreg_wwan>;
1089
1090	pinctrl-0 = <&pcie5_default>;
1091	pinctrl-names = "default";
1092
1093	status = "okay";
1094};
1095
1096&pcie5_phy {
1097	vdda-phy-supply = <&vreg_l3i_0p8>;
1098	vdda-pll-supply = <&vreg_l3e_1p2>;
1099
1100	status = "okay";
1101};
1102
1103&pcie6a {
1104	perst-gpios = <&tlmm 152 GPIO_ACTIVE_LOW>;
1105	wake-gpios = <&tlmm 154 GPIO_ACTIVE_LOW>;
1106
1107	vddpe-3v3-supply = <&vreg_nvme>;
1108
1109	pinctrl-0 = <&pcie6a_default>;
1110	pinctrl-names = "default";
1111
1112	status = "okay";
1113};
1114
1115&pcie6a_phy {
1116	vdda-phy-supply = <&vreg_l1d_0p8>;
1117	vdda-pll-supply = <&vreg_l2j_1p2>;
1118
1119	status = "okay";
1120};
1121
1122&pm8550_gpios {
1123	rtmr0_default: rtmr0-reset-n-active-state {
1124		pins = "gpio10";
1125		function = "normal";
1126		power-source = <1>; /* 1.8V */
1127		bias-disable;
1128		input-disable;
1129		output-enable;
1130	};
1131
1132	usb0_3p3_reg_en: usb0-3p3-reg-en-state {
1133		pins = "gpio11";
1134		function = "normal";
1135		power-source = <1>; /* 1.8V */
1136		bias-disable;
1137		input-disable;
1138		output-enable;
1139	};
1140};
1141
1142&pm8550ve_8_gpios {
1143	misc_3p3_reg_en: misc-3p3-reg-en-state {
1144		pins = "gpio6";
1145		function = "normal";
1146		bias-disable;
1147		drive-push-pull;
1148		input-disable;
1149		output-enable;
1150		power-source = <1>; /* 1.8 V */
1151		qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
1152	};
1153};
1154
1155&pm8550ve_9_gpios {
1156	usb0_1p8_reg_en: usb0-1p8-reg-en-state {
1157		pins = "gpio8";
1158		function = "normal";
1159		power-source = <1>; /* 1.8V */
1160		bias-disable;
1161		input-disable;
1162		output-enable;
1163	};
1164};
1165
1166&pmc8380_3_gpios {
1167	edp_bl_en: edp-bl-en-state {
1168		pins = "gpio4";
1169		function = "normal";
1170		power-source = <1>;
1171		input-disable;
1172		output-enable;
1173	};
1174};
1175
1176&pmc8380_5_gpios {
1177	usb0_pwr_1p15_reg_en: usb0-pwr-1p15-reg-en-state {
1178		pins = "gpio8";
1179		function = "normal";
1180		power-source = <1>; /* 1.8V */
1181		bias-disable;
1182		input-disable;
1183		output-enable;
1184	};
1185};
1186
1187&qupv3_0 {
1188	status = "okay";
1189};
1190
1191&qupv3_1 {
1192	status = "okay";
1193};
1194
1195&qupv3_2 {
1196	status = "okay";
1197};
1198
1199&remoteproc_adsp {
1200	firmware-name = "qcom/x1e80100/LENOVO/21N1/qcadsp8380.mbn",
1201			"qcom/x1e80100/LENOVO/21N1/adsp_dtbs.elf";
1202
1203	status = "okay";
1204};
1205
1206&remoteproc_cdsp {
1207	firmware-name = "qcom/x1e80100/LENOVO/21N1/qccdsp8380.mbn",
1208			"qcom/x1e80100/LENOVO/21N1/cdsp_dtbs.elf";
1209
1210	status = "okay";
1211};
1212
1213&smb2360_0 {
1214	status = "okay";
1215};
1216
1217&smb2360_0_eusb2_repeater {
1218	vdd18-supply = <&vreg_l3d_1p8>;
1219	vdd3-supply = <&vreg_l2b_3p0>;
1220};
1221
1222&smb2360_1 {
1223	status = "okay";
1224};
1225
1226&smb2360_1_eusb2_repeater {
1227	vdd18-supply = <&vreg_l3d_1p8>;
1228	vdd3-supply = <&vreg_l14b_3p0>;
1229};
1230
1231&swr0 {
1232	status = "okay";
1233
1234	pinctrl-0 = <&wsa_swr_active>, <&spkr_01_sd_n_active>;
1235	pinctrl-names = "default";
1236
1237	/* WSA8845, Left Speaker */
1238	left_spkr: speaker@0,0 {
1239		compatible = "sdw20217020400";
1240		reg = <0 0>;
1241		reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>;
1242		#sound-dai-cells = <0>;
1243		sound-name-prefix = "SpkrLeft";
1244		vdd-1p8-supply = <&vreg_l15b_1p8>;
1245		vdd-io-supply = <&vreg_l12b_1p2>;
1246		qcom,port-mapping = <1 2 3 7 10 13>;
1247	};
1248
1249	/* WSA8845, Right Speaker */
1250	right_spkr: speaker@0,1 {
1251		compatible = "sdw20217020400";
1252		reg = <0 1>;
1253		reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>;
1254		#sound-dai-cells = <0>;
1255		sound-name-prefix = "SpkrRight";
1256		vdd-1p8-supply = <&vreg_l15b_1p8>;
1257		vdd-io-supply = <&vreg_l12b_1p2>;
1258		qcom,port-mapping = <4 5 6 7 11 13>;
1259	};
1260};
1261
1262&swr1 {
1263	status = "okay";
1264
1265	/* WCD9385 RX */
1266	wcd_rx: codec@0,4 {
1267		compatible = "sdw20217010d00";
1268		reg = <0 4>;
1269		qcom,rx-port-mapping = <1 2 3 4 5>;
1270	};
1271};
1272
1273&swr2 {
1274	status = "okay";
1275
1276	/* WCD9385 TX */
1277	wcd_tx: codec@0,3 {
1278		compatible = "sdw20217010d00";
1279		reg = <0 3>;
1280		qcom,tx-port-mapping = <2 2 3 4>;
1281	};
1282};
1283
1284&tlmm {
1285	gpio-reserved-ranges = <34 2>, /* Unused */
1286			       <44 4>, /* SPI (TPM) */
1287			       <72 2>, /* Secure EC I2C connection (?) */
1288			       <238 1>; /* UFS Reset */
1289
1290	ec_int_n_default: ec-int-n-state {
1291		pins = "gpio66";
1292		function = "gpio";
1293		bias-disable;
1294	};
1295
1296	eusb3_reset_n: eusb3-reset-n-state {
1297		pins = "gpio6";
1298		function = "gpio";
1299		drive-strength = <2>;
1300		bias-disable;
1301		output-low;
1302	};
1303
1304	eusb5_reset_n: eusb5-reset-n-state {
1305		pins = "gpio7";
1306		function = "gpio";
1307		drive-strength = <2>;
1308		bias-disable;
1309		output-low;
1310	};
1311
1312	eusb6_reset_n: eusb6-reset-n-state {
1313		pins = "gpio184";
1314		function = "gpio";
1315		drive-strength = <2>;
1316		bias-disable;
1317		output-low;
1318	};
1319
1320	tpad_default: tpad-default-state {
1321		pins = "gpio3";
1322		function = "gpio";
1323		bias-pull-up;
1324	};
1325
1326	nvme_reg_en: nvme-reg-en-state {
1327		pins = "gpio18";
1328		function = "gpio";
1329		drive-strength = <2>;
1330		bias-disable;
1331	};
1332
1333	ts0_default: ts0-default-state {
1334		reset-n-pins {
1335			pins = "gpio48";
1336			function = "gpio";
1337			output-high;
1338			drive-strength = <16>;
1339		};
1340
1341		int-n-pins {
1342			pins = "gpio51";
1343			function = "gpio";
1344			bias-disable;
1345		};
1346	};
1347
1348	kybd_default: kybd-default-state {
1349		pins = "gpio67";
1350		function = "gpio";
1351		bias-disable;
1352	};
1353
1354	edp_reg_en: edp-reg-en-state {
1355		pins = "gpio70";
1356		function = "gpio";
1357		drive-strength = <16>;
1358		bias-disable;
1359	};
1360
1361	hall_int_n_default: hall-int-n-state {
1362		pins = "gpio92";
1363		function = "gpio";
1364		bias-disable;
1365	};
1366
1367	pcie4_default: pcie4-default-state {
1368		clkreq-n-pins {
1369			pins = "gpio147";
1370			function = "pcie4_clk";
1371			drive-strength = <2>;
1372			bias-pull-up;
1373		};
1374
1375		perst-n-pins {
1376			pins = "gpio146";
1377			function = "gpio";
1378			drive-strength = <2>;
1379			bias-disable;
1380		};
1381
1382		wake-n-pins {
1383			pins = "gpio148";
1384			function = "gpio";
1385			drive-strength = <2>;
1386			bias-pull-up;
1387		};
1388	};
1389
1390	pcie5_default: pcie5-default-state {
1391		clkreq-n-pins {
1392			pins = "gpio150";
1393			function = "pcie5_clk";
1394			drive-strength = <2>;
1395			bias-pull-up;
1396		};
1397
1398		perst-n-pins {
1399			pins = "gpio149";
1400			function = "gpio";
1401			drive-strength = <2>;
1402			bias-disable;
1403		};
1404
1405		wake-n-pins {
1406			pins = "gpio151";
1407			function = "gpio";
1408			drive-strength = <2>;
1409			bias-pull-up;
1410		};
1411	};
1412
1413	pcie6a_default: pcie6a-default-state {
1414		clkreq-n-pins {
1415			pins = "gpio153";
1416			function = "pcie6a_clk";
1417			drive-strength = <2>;
1418			bias-pull-up;
1419		};
1420
1421		perst-n-pins {
1422			pins = "gpio152";
1423			function = "gpio";
1424			drive-strength = <2>;
1425			bias-disable;
1426		};
1427
1428		wake-n-pins {
1429			pins = "gpio154";
1430			function = "gpio";
1431			drive-strength = <2>;
1432			bias-pull-up;
1433		};
1434	};
1435
1436	rtmr1_default: rtmr1-reset-n-active-state {
1437		pins = "gpio176";
1438		function = "gpio";
1439		drive-strength = <2>;
1440		bias-disable;
1441	};
1442
1443	us_euro_hs_sel: us-euro-hs-sel-state {
1444		pins = "gpio68";
1445		function = "gpio";
1446		bias-pull-down;
1447		drive-strength = <2>;
1448	};
1449
1450	usb1_pwr_1p15_reg_en: usb1-pwr-1p15-reg-en-state {
1451		pins = "gpio188";
1452		function = "gpio";
1453		drive-strength = <2>;
1454		bias-disable;
1455	};
1456
1457	usb1_pwr_1p8_reg_en: usb1-pwr-1p8-reg-en-state {
1458		pins = "gpio175";
1459		function = "gpio";
1460		drive-strength = <2>;
1461		bias-disable;
1462	};
1463
1464	usb1_pwr_3p3_reg_en: usb1-pwr-3p3-reg-en-state {
1465		pins = "gpio186";
1466		function = "gpio";
1467		drive-strength = <2>;
1468		bias-disable;
1469	};
1470
1471	wcd_default: wcd-reset-n-active-state {
1472		pins = "gpio191";
1473		function = "gpio";
1474		drive-strength = <16>;
1475		bias-disable;
1476		output-low;
1477	};
1478
1479	wwan_sw_en: wwan-sw-en-state {
1480		pins = "gpio221";
1481		function = "gpio";
1482		drive-strength = <4>;
1483		bias-disable;
1484	};
1485};
1486
1487&usb_1_ss0_hsphy {
1488	vdd-supply = <&vreg_l3j_0p8>;
1489	vdda12-supply = <&vreg_l2j_1p2>;
1490
1491	phys = <&smb2360_0_eusb2_repeater>;
1492
1493	status = "okay";
1494};
1495
1496&usb_1_ss0_qmpphy {
1497	vdda-phy-supply = <&vreg_l2j_1p2>;
1498	vdda-pll-supply = <&vreg_l1j_0p8>;
1499
1500	status = "okay";
1501};
1502
1503&usb_1_ss0 {
1504	status = "okay";
1505};
1506
1507&usb_1_ss0_dwc3 {
1508	dr_mode = "host";
1509};
1510
1511&usb_1_ss0_dwc3_hs {
1512	remote-endpoint = <&pmic_glink_ss0_hs_in>;
1513};
1514
1515&usb_1_ss0_qmpphy_out {
1516	remote-endpoint = <&retimer_ss0_ss_in>;
1517};
1518
1519&usb_1_ss1_hsphy {
1520	vdd-supply = <&vreg_l3j_0p8>;
1521	vdda12-supply = <&vreg_l2j_1p2>;
1522
1523	phys = <&smb2360_1_eusb2_repeater>;
1524
1525	status = "okay";
1526};
1527
1528&usb_1_ss1_qmpphy {
1529	vdda-phy-supply = <&vreg_l2j_1p2>;
1530	vdda-pll-supply = <&vreg_l2d_0p9>;
1531
1532	status = "okay";
1533};
1534
1535&usb_1_ss1 {
1536	status = "okay";
1537};
1538
1539&usb_1_ss1_dwc3 {
1540	dr_mode = "host";
1541};
1542
1543&usb_1_ss1_dwc3_hs {
1544	remote-endpoint = <&pmic_glink_ss1_hs_in>;
1545};
1546
1547&usb_1_ss1_qmpphy_out {
1548	remote-endpoint = <&retimer_ss1_ss_in>;
1549};
1550
1551&usb_2 {
1552	status = "okay";
1553};
1554
1555&usb_2_dwc3 {
1556	dr_mode = "host";
1557};
1558
1559&usb_2_hsphy {
1560	vdd-supply = <&vreg_l2e_0p8>;
1561	vdda12-supply = <&vreg_l3e_1p2>;
1562
1563	phys = <&eusb5_repeater>;
1564
1565	status = "okay";
1566};
1567
1568&usb_mp {
1569	status = "okay";
1570};
1571
1572&usb_mp_hsphy0 {
1573	vdd-supply = <&vreg_l2e_0p8>;
1574	vdda12-supply = <&vreg_l3e_1p2>;
1575
1576	phys = <&eusb3_repeater>;
1577
1578	status = "okay";
1579};
1580
1581&usb_mp_hsphy1 {
1582	vdd-supply = <&vreg_l2e_0p8>;
1583	vdda12-supply = <&vreg_l3e_1p2>;
1584
1585	phys = <&eusb6_repeater>;
1586
1587	status = "okay";
1588};
1589
1590&usb_mp_qmpphy0 {
1591	vdda-phy-supply = <&vreg_l3e_1p2>;
1592	vdda-pll-supply = <&vreg_l3c_0p8>;
1593
1594	status = "okay";
1595};
1596
1597&usb_mp_qmpphy1 {
1598	vdda-phy-supply = <&vreg_l3e_1p2>;
1599	vdda-pll-supply = <&vreg_l3c_0p8>;
1600
1601	status = "okay";
1602};
~/ Read-only file preview.