FILE
x1-asus-zenbook-a14.dtsi
File preview with syntax highlighting.
linux-6.19.14/arch/arm64/boot/dts/qcom/x1-asus-zenbook-a14.dtsi
1// SPDX-License-Identifier: BSD-3-Clause 2/* 3 * Copyright (c) 2025 Qualcomm Innovation Center, Inc. All rights reserved. 4 * Copyright (c) 2025 Aleksandrs Vinarskis <alex.vinarskis@gmail.com> 5 */ 6 7#include <dt-bindings/gpio/gpio.h> 8#include <dt-bindings/input/gpio-keys.h> 9#include <dt-bindings/input/input.h> 10#include <dt-bindings/leds/common.h> 11#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> 12#include <dt-bindings/regulator/qcom,rpmh-regulator.h> 13 14#include "hamoa-pmics.dtsi" 15 16/ { 17 chassis-type = "laptop"; 18 19 aliases { 20 serial0 = &uart21; 21 serial1 = &uart14; 22 }; 23 24 wcd938x: audio-codec { 25 compatible = "qcom,wcd9385-codec"; 26 27 pinctrl-0 = <&wcd_default>; 28 pinctrl-names = "default"; 29 30 qcom,micbias1-microvolt = <1800000>; 31 qcom,micbias2-microvolt = <1800000>; 32 qcom,micbias3-microvolt = <1800000>; 33 qcom,micbias4-microvolt = <1800000>; 34 qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>; 35 qcom,mbhc-headset-vthreshold-microvolt = <1700000>; 36 qcom,mbhc-headphone-vthreshold-microvolt = <50000>; 37 qcom,rx-device = <&wcd_rx>; 38 qcom,tx-device = <&wcd_tx>; 39 40 reset-gpios = <&tlmm 191 GPIO_ACTIVE_LOW>; 41 42 vdd-buck-supply = <&vreg_l15b_1p8>; 43 vdd-rxtx-supply = <&vreg_l15b_1p8>; 44 vdd-io-supply = <&vreg_l15b_1p8>; 45 vdd-mic-bias-supply = <&vreg_bob1>; 46 47 #sound-dai-cells = <1>; 48 }; 49 50 gpio-keys { 51 compatible = "gpio-keys"; 52 53 pinctrl-0 = <&hall_int_n_default>; 54 pinctrl-names = "default"; 55 56 switch-lid { 57 label = "lid"; 58 gpios = <&tlmm 92 GPIO_ACTIVE_LOW>; 59 linux,input-type = <EV_SW>; 60 linux,code = <SW_LID>; 61 wakeup-source; 62 wakeup-event-action = <EV_ACT_DEASSERTED>; 63 }; 64 }; 65 66 leds { 67 compatible = "gpio-leds"; 68 69 pinctrl-0 = <&cam_indicator_en>; 70 pinctrl-names = "default"; 71 72 led-camera-indicator { 73 label = "white:camera-indicator"; 74 function = LED_FUNCTION_INDICATOR; 75 color = <LED_COLOR_ID_WHITE>; 76 gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>; 77 linux,default-trigger = "none"; 78 default-state = "off"; 79 /* Reuse as a panic indicator until we get a "camera on" trigger */ 80 panic-indicator; 81 }; 82 }; 83 84 pmic-glink { 85 compatible = "qcom,x1e80100-pmic-glink", 86 "qcom,sm8550-pmic-glink", 87 "qcom,pmic-glink"; 88 orientation-gpios = <&tlmm 121 GPIO_ACTIVE_HIGH>, 89 <&tlmm 123 GPIO_ACTIVE_HIGH>; 90 #address-cells = <1>; 91 #size-cells = <0>; 92 93 /* Left-side display-adjacent port */ 94 connector@0 { 95 compatible = "usb-c-connector"; 96 reg = <0>; 97 power-role = "dual"; 98 data-role = "dual"; 99 100 ports { 101 #address-cells = <1>; 102 #size-cells = <0>; 103 104 port@0 { 105 reg = <0>; 106 107 pmic_glink_ss0_hs_in: endpoint { 108 remote-endpoint = <&usb_1_ss0_dwc3_hs>; 109 }; 110 }; 111 112 port@1 { 113 reg = <1>; 114 115 pmic_glink_ss0_ss_in: endpoint { 116 remote-endpoint = <&retimer_ss0_ss_out>; 117 }; 118 }; 119 120 port@2 { 121 reg = <2>; 122 123 pmic_glink_ss0_con_sbu_in: endpoint { 124 remote-endpoint = <&retimer_ss0_con_sbu_out>; 125 }; 126 }; 127 }; 128 }; 129 130 /* Left-side user-adjacent port */ 131 connector@1 { 132 compatible = "usb-c-connector"; 133 reg = <1>; 134 power-role = "dual"; 135 data-role = "dual"; 136 137 ports { 138 #address-cells = <1>; 139 #size-cells = <0>; 140 141 port@0 { 142 reg = <0>; 143 144 pmic_glink_ss1_hs_in: endpoint { 145 remote-endpoint = <&usb_1_ss1_dwc3_hs>; 146 }; 147 }; 148 149 port@1 { 150 reg = <1>; 151 152 pmic_glink_ss1_ss_in: endpoint { 153 remote-endpoint = <&retimer_ss1_ss_out>; 154 }; 155 }; 156 157 port@2 { 158 reg = <2>; 159 160 pmic_glink_ss1_con_sbu_in: endpoint { 161 remote-endpoint = <&retimer_ss1_con_sbu_out>; 162 }; 163 }; 164 }; 165 }; 166 }; 167 168 reserved-memory { 169 linux,cma { 170 compatible = "shared-dma-pool"; 171 size = <0x0 0x8000000>; 172 reusable; 173 linux,cma-default; 174 }; 175 }; 176 177 sound { 178 compatible = "qcom,x1e80100-sndcard"; 179 model = "X1E80100-ASUS-Zenbook-A14"; 180 audio-routing = "SpkrLeft IN", "WSA WSA_SPK1 OUT", 181 "SpkrRight IN", "WSA WSA_SPK2 OUT", 182 "IN1_HPHL", "HPHL_OUT", 183 "IN2_HPHR", "HPHR_OUT", 184 "AMIC2", "MIC BIAS2", 185 "VA DMIC0", "MIC BIAS1", 186 "VA DMIC1", "MIC BIAS1", 187 "VA DMIC0", "VA MIC BIAS1", 188 "VA DMIC1", "VA MIC BIAS1", 189 "TX SWR_INPUT1", "ADC2_OUTPUT"; 190 191 va-dai-link { 192 link-name = "VA Capture"; 193 194 codec { 195 sound-dai = <&lpass_vamacro 0>; 196 }; 197 198 cpu { 199 sound-dai = <&q6apmbedai VA_CODEC_DMA_TX_0>; 200 }; 201 202 platform { 203 sound-dai = <&q6apm>; 204 }; 205 }; 206 207 wcd-capture-dai-link { 208 link-name = "WCD Capture"; 209 210 codec { 211 sound-dai = <&wcd938x 1>, <&swr2 1>, 212 <&lpass_txmacro 0>; 213 }; 214 215 cpu { 216 sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>; 217 }; 218 219 platform { 220 sound-dai = <&q6apm>; 221 }; 222 }; 223 224 wcd-playback-dai-link { 225 link-name = "WCD Playback"; 226 227 codec { 228 sound-dai = <&wcd938x 0>, <&swr1 0>, 229 <&lpass_rxmacro 0>; 230 }; 231 232 cpu { 233 sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>; 234 }; 235 236 platform { 237 sound-dai = <&q6apm>; 238 }; 239 }; 240 241 wsa-dai-link { 242 link-name = "WSA Playback"; 243 244 codec { 245 sound-dai = <&left_spkr>, <&right_spkr>, 246 <&swr0 0>, <&lpass_wsamacro 0>; 247 }; 248 249 cpu { 250 sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>; 251 }; 252 253 platform { 254 sound-dai = <&q6apm>; 255 }; 256 }; 257 }; 258 259 vreg_edp_3p3: regulator-edp-3p3 { 260 compatible = "regulator-fixed"; 261 262 regulator-name = "VREG_EDP_3P3"; 263 regulator-min-microvolt = <3300000>; 264 regulator-max-microvolt = <3300000>; 265 266 gpio = <&tlmm 70 GPIO_ACTIVE_HIGH>; 267 enable-active-high; 268 269 pinctrl-0 = <&edp_reg_en>; 270 pinctrl-names = "default"; 271 272 regulator-boot-on; 273 }; 274 275 vreg_misc_3p3: regulator-misc-3p3 { 276 compatible = "regulator-fixed"; 277 278 regulator-name = "VREG_MISC_3P3"; 279 regulator-min-microvolt = <3300000>; 280 regulator-max-microvolt = <3300000>; 281 282 gpio = <&pm8550ve_8_gpios 6 GPIO_ACTIVE_HIGH>; 283 enable-active-high; 284 285 pinctrl-0 = <&misc_3p3_reg_en>; 286 pinctrl-names = "default"; 287 288 regulator-boot-on; 289 regulator-always-on; 290 }; 291 292 vreg_nvme: regulator-nvme { 293 compatible = "regulator-fixed"; 294 295 regulator-name = "VREG_NVME_3P3"; 296 regulator-min-microvolt = <3300000>; 297 regulator-max-microvolt = <3300000>; 298 299 gpio = <&tlmm 18 GPIO_ACTIVE_HIGH>; 300 enable-active-high; 301 302 pinctrl-0 = <&nvme_reg_en>; 303 pinctrl-names = "default"; 304 305 regulator-boot-on; 306 }; 307 308 vreg_rtmr0_1p15: regulator-rtmr0-1p15 { 309 compatible = "regulator-fixed"; 310 311 regulator-name = "VREG_RTMR0_1P15"; 312 regulator-min-microvolt = <1150000>; 313 regulator-max-microvolt = <1150000>; 314 315 gpio = <&pmc8380_5_gpios 8 GPIO_ACTIVE_HIGH>; 316 enable-active-high; 317 318 pinctrl-0 = <&usb0_pwr_1p15_reg_en>; 319 pinctrl-names = "default"; 320 321 regulator-boot-on; 322 }; 323 324 vreg_rtmr0_1p8: regulator-rtmr0-1p8 { 325 compatible = "regulator-fixed"; 326 327 regulator-name = "VREG_RTMR0_1P8"; 328 regulator-min-microvolt = <1800000>; 329 regulator-max-microvolt = <1800000>; 330 331 gpio = <&pm8550ve_9_gpios 8 GPIO_ACTIVE_HIGH>; 332 enable-active-high; 333 334 pinctrl-0 = <&usb0_1p8_reg_en>; 335 pinctrl-names = "default"; 336 337 regulator-boot-on; 338 }; 339 340 vreg_rtmr0_3p3: regulator-rtmr0-3p3 { 341 compatible = "regulator-fixed"; 342 343 regulator-name = "VREG_RTMR0_3P3"; 344 regulator-min-microvolt = <3300000>; 345 regulator-max-microvolt = <3300000>; 346 347 gpio = <&pm8550_gpios 11 GPIO_ACTIVE_HIGH>; 348 enable-active-high; 349 350 pinctrl-0 = <&usb0_3p3_reg_en>; 351 pinctrl-names = "default"; 352 353 regulator-boot-on; 354 }; 355 356 vreg_rtmr1_1p15: regulator-rtmr1-1p15 { 357 compatible = "regulator-fixed"; 358 359 regulator-name = "VREG_RTMR1_1P15"; 360 regulator-min-microvolt = <1150000>; 361 regulator-max-microvolt = <1150000>; 362 363 gpio = <&tlmm 188 GPIO_ACTIVE_HIGH>; 364 enable-active-high; 365 366 pinctrl-0 = <&usb1_pwr_1p15_reg_en>; 367 pinctrl-names = "default"; 368 369 regulator-boot-on; 370 }; 371 372 vreg_rtmr1_1p8: regulator-rtmr1-1p8 { 373 compatible = "regulator-fixed"; 374 375 regulator-name = "VREG_RTMR1_1P8"; 376 regulator-min-microvolt = <1800000>; 377 regulator-max-microvolt = <1800000>; 378 379 gpio = <&tlmm 175 GPIO_ACTIVE_HIGH>; 380 enable-active-high; 381 382 pinctrl-0 = <&usb1_pwr_1p8_reg_en>; 383 pinctrl-names = "default"; 384 385 regulator-boot-on; 386 }; 387 388 vreg_rtmr1_3p3: regulator-rtmr1-3p3 { 389 compatible = "regulator-fixed"; 390 391 regulator-name = "VREG_RTMR1_3P3"; 392 regulator-min-microvolt = <3300000>; 393 regulator-max-microvolt = <3300000>; 394 395 gpio = <&tlmm 186 GPIO_ACTIVE_HIGH>; 396 enable-active-high; 397 398 pinctrl-0 = <&usb1_pwr_3p3_reg_en>; 399 pinctrl-names = "default"; 400 401 regulator-boot-on; 402 }; 403 404 vreg_vph_pwr: regulator-vph-pwr { 405 compatible = "regulator-fixed"; 406 407 regulator-name = "vph_pwr"; 408 regulator-min-microvolt = <3700000>; 409 regulator-max-microvolt = <3700000>; 410 411 regulator-always-on; 412 regulator-boot-on; 413 }; 414 415 vreg_wcn_0p95: regulator-wcn-0p95 { 416 compatible = "regulator-fixed"; 417 418 regulator-name = "VREG_WCN_0P95"; 419 regulator-min-microvolt = <950000>; 420 regulator-max-microvolt = <950000>; 421 422 vin-supply = <&vreg_wcn_3p3>; 423 }; 424 425 vreg_wcn_1p9: regulator-wcn-1p9 { 426 compatible = "regulator-fixed"; 427 428 regulator-name = "VREG_WCN_1P9"; 429 regulator-min-microvolt = <1900000>; 430 regulator-max-microvolt = <1900000>; 431 432 vin-supply = <&vreg_wcn_3p3>; 433 }; 434 435 vreg_wcn_3p3: regulator-wcn-3p3 { 436 compatible = "regulator-fixed"; 437 438 regulator-name = "VREG_WCN_3P3"; 439 regulator-min-microvolt = <3300000>; 440 regulator-max-microvolt = <3300000>; 441 442 gpio = <&tlmm 214 GPIO_ACTIVE_HIGH>; 443 enable-active-high; 444 445 pinctrl-0 = <&wcn_sw_en>; 446 pinctrl-names = "default"; 447 448 regulator-boot-on; 449 }; 450}; 451 452&apps_rsc { 453 regulators-0 { 454 compatible = "qcom,pm8550-rpmh-regulators"; 455 qcom,pmic-id = "b"; 456 457 vdd-bob1-supply = <&vreg_vph_pwr>; 458 vdd-bob2-supply = <&vreg_vph_pwr>; 459 vdd-l1-l4-l10-supply = <&vreg_s4c_1p8>; 460 vdd-l2-l13-l14-supply = <&vreg_bob1>; 461 vdd-l5-l16-supply = <&vreg_bob1>; 462 vdd-l6-l7-supply = <&vreg_bob2>; 463 vdd-l8-l9-supply = <&vreg_bob1>; 464 vdd-l12-supply = <&vreg_s5j_1p2>; 465 vdd-l15-supply = <&vreg_s4c_1p8>; 466 vdd-l17-supply = <&vreg_bob2>; 467 468 vreg_bob1: bob1 { 469 regulator-name = "vreg_bob1"; 470 regulator-min-microvolt = <3008000>; 471 regulator-max-microvolt = <3960000>; 472 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 473 }; 474 475 vreg_bob2: bob2 { 476 regulator-name = "vreg_bob2"; 477 regulator-min-microvolt = <2504000>; 478 regulator-max-microvolt = <3008000>; 479 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 480 }; 481 482 vreg_l1b_1p8: ldo1 { 483 regulator-name = "vreg_l1b_1p8"; 484 regulator-min-microvolt = <1800000>; 485 regulator-max-microvolt = <1800000>; 486 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 487 }; 488 489 vreg_l2b_3p0: ldo2 { 490 regulator-name = "vreg_l2b_3p0"; 491 regulator-min-microvolt = <3072000>; 492 regulator-max-microvolt = <3072000>; 493 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 494 }; 495 496 vreg_l4b_1p8: ldo4 { 497 regulator-name = "vreg_l4b_1p8"; 498 regulator-min-microvolt = <1800000>; 499 regulator-max-microvolt = <1800000>; 500 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 501 }; 502 503 vreg_l6b_1p8: ldo6 { 504 regulator-name = "vreg_l6b_1p8"; 505 regulator-min-microvolt = <1800000>; 506 regulator-max-microvolt = <2960000>; 507 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 508 }; 509 510 vreg_l8b_3p0: ldo8 { 511 regulator-name = "vreg_l8b_3p0"; 512 regulator-min-microvolt = <3072000>; 513 regulator-max-microvolt = <3072000>; 514 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 515 }; 516 517 vreg_l9b_2p9: ldo9 { 518 regulator-name = "vreg_l9b_2p9"; 519 regulator-min-microvolt = <2960000>; 520 regulator-max-microvolt = <2960000>; 521 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 522 }; 523 524 vreg_l10b_1p8: ldo10 { 525 regulator-name = "vreg_l10b_1p8"; 526 regulator-min-microvolt = <1800000>; 527 regulator-max-microvolt = <1800000>; 528 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 529 }; 530 531 vreg_l12b_1p2: ldo12 { 532 regulator-name = "vreg_l12b_1p2"; 533 regulator-min-microvolt = <1200000>; 534 regulator-max-microvolt = <1200000>; 535 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 536 regulator-always-on; 537 }; 538 539 vreg_l13b_3p0: ldo13 { 540 regulator-name = "vreg_l13b_3p0"; 541 regulator-min-microvolt = <3072000>; 542 regulator-max-microvolt = <3072000>; 543 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 544 }; 545 546 vreg_l14b_3p0: ldo14 { 547 regulator-name = "vreg_l14b_3p0"; 548 regulator-min-microvolt = <3072000>; 549 regulator-max-microvolt = <3072000>; 550 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 551 }; 552 553 vreg_l15b_1p8: ldo15 { 554 regulator-name = "vreg_l15b_1p8"; 555 regulator-min-microvolt = <1800000>; 556 regulator-max-microvolt = <1800000>; 557 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 558 regulator-always-on; 559 }; 560 561 vreg_l17b_2p5: ldo17 { 562 regulator-name = "vreg_l17b_2p5"; 563 regulator-min-microvolt = <2504000>; 564 regulator-max-microvolt = <2504000>; 565 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 566 }; 567 }; 568 569 regulators-1 { 570 compatible = "qcom,pm8550ve-rpmh-regulators"; 571 qcom,pmic-id = "c"; 572 573 vdd-l1-supply = <&vreg_s5j_1p2>; 574 vdd-l2-supply = <&vreg_s1f_0p7>; 575 vdd-l3-supply = <&vreg_s1f_0p7>; 576 vdd-s4-supply = <&vreg_vph_pwr>; 577 578 vreg_s4c_1p8: smps4 { 579 regulator-name = "vreg_s4c_1p8"; 580 regulator-min-microvolt = <1856000>; 581 regulator-max-microvolt = <2000000>; 582 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 583 }; 584 585 vreg_l1c_1p2: ldo1 { 586 regulator-name = "vreg_l1c_1p2"; 587 regulator-min-microvolt = <1200000>; 588 regulator-max-microvolt = <1200000>; 589 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 590 }; 591 592 vreg_l2c_0p8: ldo2 { 593 regulator-name = "vreg_l2c_0p8"; 594 regulator-min-microvolt = <880000>; 595 regulator-max-microvolt = <880000>; 596 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 597 }; 598 599 vreg_l3c_0p9: ldo3 { 600 regulator-name = "vreg_l3c_0p9"; 601 regulator-min-microvolt = <912000>; 602 regulator-max-microvolt = <912000>; 603 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 604 }; 605 }; 606 607 regulators-2 { 608 compatible = "qcom,pmc8380-rpmh-regulators"; 609 qcom,pmic-id = "d"; 610 611 vdd-l1-supply = <&vreg_s1f_0p7>; 612 vdd-l2-supply = <&vreg_s1f_0p7>; 613 vdd-l3-supply = <&vreg_s4c_1p8>; 614 vdd-s1-supply = <&vreg_vph_pwr>; 615 616 vreg_l1d_0p8: ldo1 { 617 regulator-name = "vreg_l1d_0p8"; 618 regulator-min-microvolt = <880000>; 619 regulator-max-microvolt = <880000>; 620 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 621 }; 622 623 vreg_l2d_0p9: ldo2 { 624 regulator-name = "vreg_l2d_0p9"; 625 regulator-min-microvolt = <912000>; 626 regulator-max-microvolt = <912000>; 627 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 628 }; 629 630 vreg_l3d_1p8: ldo3 { 631 regulator-name = "vreg_l3d_1p8"; 632 regulator-min-microvolt = <1800000>; 633 regulator-max-microvolt = <1800000>; 634 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 635 }; 636 }; 637 638 regulators-3 { 639 compatible = "qcom,pmc8380-rpmh-regulators"; 640 qcom,pmic-id = "e"; 641 642 vdd-l2-supply = <&vreg_s1f_0p7>; 643 vdd-l3-supply = <&vreg_s5j_1p2>; 644 645 vreg_l2e_0p8: ldo2 { 646 regulator-name = "vreg_l2e_0p8"; 647 regulator-min-microvolt = <880000>; 648 regulator-max-microvolt = <880000>; 649 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 650 }; 651 652 vreg_l3e_1p2: ldo3 { 653 regulator-name = "vreg_l3e_1p2"; 654 regulator-min-microvolt = <1200000>; 655 regulator-max-microvolt = <1200000>; 656 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 657 }; 658 }; 659 660 regulators-4 { 661 compatible = "qcom,pmc8380-rpmh-regulators"; 662 qcom,pmic-id = "f"; 663 664 vdd-l1-supply = <&vreg_s5j_1p2>; 665 vdd-l2-supply = <&vreg_s5j_1p2>; 666 vdd-l3-supply = <&vreg_s5j_1p2>; 667 vdd-s1-supply = <&vreg_vph_pwr>; 668 669 vreg_s1f_0p7: smps1 { 670 regulator-name = "vreg_s1f_0p7"; 671 regulator-min-microvolt = <700000>; 672 regulator-max-microvolt = <1100000>; 673 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 674 }; 675 }; 676 677 regulators-6 { 678 compatible = "qcom,pm8550ve-rpmh-regulators"; 679 qcom,pmic-id = "i"; 680 681 vdd-l1-supply = <&vreg_s4c_1p8>; 682 vdd-l2-supply = <&vreg_s5j_1p2>; 683 vdd-l3-supply = <&vreg_s1f_0p7>; 684 vdd-s1-supply = <&vreg_vph_pwr>; 685 vdd-s2-supply = <&vreg_vph_pwr>; 686 687 vreg_s1i_0p9: smps1 { 688 regulator-name = "vreg_s1i_0p9"; 689 regulator-min-microvolt = <900000>; 690 regulator-max-microvolt = <920000>; 691 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 692 }; 693 694 vreg_s2i_1p0: smps2 { 695 regulator-name = "vreg_s2i_1p0"; 696 regulator-min-microvolt = <1000000>; 697 regulator-max-microvolt = <1100000>; 698 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 699 }; 700 701 vreg_l1i_1p8: ldo1 { 702 regulator-name = "vreg_l1i_1p8"; 703 regulator-min-microvolt = <1800000>; 704 regulator-max-microvolt = <1800000>; 705 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 706 }; 707 708 vreg_l2i_1p2: ldo2 { 709 regulator-name = "vreg_l2i_1p2"; 710 regulator-min-microvolt = <1200000>; 711 regulator-max-microvolt = <1200000>; 712 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 713 }; 714 715 vreg_l3i_0p8: ldo3 { 716 regulator-name = "vreg_l3i_0p8"; 717 regulator-min-microvolt = <880000>; 718 regulator-max-microvolt = <880000>; 719 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 720 }; 721 }; 722 723 regulators-7 { 724 compatible = "qcom,pm8550ve-rpmh-regulators"; 725 qcom,pmic-id = "j"; 726 727 vdd-l1-supply = <&vreg_s1f_0p7>; 728 vdd-l2-supply = <&vreg_s5j_1p2>; 729 vdd-l3-supply = <&vreg_s1f_0p7>; 730 vdd-s5-supply = <&vreg_vph_pwr>; 731 732 vreg_s5j_1p2: smps5 { 733 regulator-name = "vreg_s5j_1p2"; 734 regulator-min-microvolt = <1256000>; 735 regulator-max-microvolt = <1304000>; 736 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 737 }; 738 739 vreg_l1j_0p9: ldo1 { 740 regulator-name = "vreg_l1j_0p9"; 741 regulator-min-microvolt = <912000>; 742 regulator-max-microvolt = <912000>; 743 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 744 }; 745 746 vreg_l2j_1p2: ldo2 { 747 regulator-name = "vreg_l2j_1p2"; 748 regulator-min-microvolt = <1256000>; 749 regulator-max-microvolt = <1256000>; 750 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 751 }; 752 753 vreg_l3j_0p8: ldo3 { 754 regulator-name = "vreg_l3j_0p8"; 755 regulator-min-microvolt = <880000>; 756 regulator-max-microvolt = <880000>; 757 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 758 }; 759 }; 760}; 761 762&i2c0 { 763 clock-frequency = <400000>; 764 765 status = "okay"; 766 767 /* ELAN, 04F3:3315 */ 768 touchpad@15 { 769 compatible = "hid-over-i2c"; 770 reg = <0x15>; 771 772 hid-descr-addr = <0x1>; 773 interrupts-extended = <&tlmm 3 IRQ_TYPE_LEVEL_LOW>; 774 775 pinctrl-0 = <&tpad_default>; 776 pinctrl-names = "default"; 777 778 wakeup-source; 779 }; 780}; 781 782&i2c3 { 783 clock-frequency = <400000>; 784 785 status = "okay"; 786 787 /* Left-side display-adjacent port */ 788 typec-mux@8 { 789 compatible = "parade,ps8833", "parade,ps8830"; 790 reg = <0x08>; 791 792 clocks = <&rpmhcc RPMH_RF_CLK3>; 793 794 vdd-supply = <&vreg_rtmr0_1p15>; 795 vdd33-supply = <&vreg_rtmr0_3p3>; 796 vdd33-cap-supply = <&vreg_rtmr0_3p3>; 797 vddar-supply = <&vreg_rtmr0_1p15>; 798 vddat-supply = <&vreg_rtmr0_1p15>; 799 vddio-supply = <&vreg_rtmr0_1p8>; 800 801 reset-gpios = <&pm8550_gpios 10 GPIO_ACTIVE_LOW>; 802 803 pinctrl-0 = <&rtmr0_default>; 804 pinctrl-names = "default"; 805 806 retimer-switch; 807 orientation-switch; 808 809 ports { 810 #address-cells = <1>; 811 #size-cells = <0>; 812 813 port@0 { 814 reg = <0>; 815 816 retimer_ss0_ss_out: endpoint { 817 remote-endpoint = <&pmic_glink_ss0_ss_in>; 818 }; 819 }; 820 821 port@1 { 822 reg = <1>; 823 824 retimer_ss0_ss_in: endpoint { 825 remote-endpoint = <&usb_1_ss0_qmpphy_out>; 826 }; 827 }; 828 829 port@2 { 830 reg = <2>; 831 832 retimer_ss0_con_sbu_out: endpoint { 833 remote-endpoint = <&pmic_glink_ss0_con_sbu_in>; 834 }; 835 }; 836 }; 837 }; 838}; 839 840&i2c4 { 841 clock-frequency = <400000>; 842 843 status = "okay"; 844 845 /* ASUSTeK, 0B05:4543 */ 846 hdtl@17 { 847 compatible = "hid-over-i2c"; 848 reg = <0x17>; 849 850 hid-descr-addr = <0x1>; 851 interrupts-extended = <&tlmm 95 IRQ_TYPE_LEVEL_LOW>; 852 853 pinctrl-0 = <&hdtl_default>; 854 pinctrl-names = "default"; 855 856 wakeup-source; 857 }; 858}; 859 860&i2c5 { 861 clock-frequency = <400000>; 862 863 status = "okay"; 864 865 eusb6_repeater: redriver@4f { 866 compatible = "nxp,ptn3222"; 867 reg = <0x4f>; 868 #phy-cells = <0>; 869 870 vdd3v3-supply = <&vreg_l13b_3p0>; 871 vdd1v8-supply = <&vreg_l4b_1p8>; 872 873 reset-gpios = <&tlmm 184 GPIO_ACTIVE_LOW>; 874 875 pinctrl-0 = <&eusb6_reset_n>; 876 pinctrl-names = "default"; 877 }; 878 879 /* EC @0x5b */ 880}; 881 882&i2c7 { 883 clock-frequency = <400000>; 884 885 status = "okay"; 886 887 /* Left-side user-adjacent port */ 888 typec-mux@8 { 889 compatible = "parade,ps8833", "parade,ps8830"; 890 reg = <0x08>; 891 892 clocks = <&rpmhcc RPMH_RF_CLK4>; 893 894 vdd-supply = <&vreg_rtmr1_1p15>; 895 vdd33-supply = <&vreg_rtmr1_3p3>; 896 vdd33-cap-supply = <&vreg_rtmr1_3p3>; 897 vddar-supply = <&vreg_rtmr1_1p15>; 898 vddat-supply = <&vreg_rtmr1_1p15>; 899 vddio-supply = <&vreg_rtmr1_1p8>; 900 901 reset-gpios = <&tlmm 176 GPIO_ACTIVE_LOW>; 902 903 pinctrl-0 = <&rtmr1_default>; 904 pinctrl-names = "default"; 905 906 retimer-switch; 907 orientation-switch; 908 909 ports { 910 #address-cells = <1>; 911 #size-cells = <0>; 912 913 port@0 { 914 reg = <0>; 915 916 retimer_ss1_ss_out: endpoint { 917 remote-endpoint = <&pmic_glink_ss1_ss_in>; 918 }; 919 }; 920 921 port@1 { 922 reg = <1>; 923 924 retimer_ss1_ss_in: endpoint { 925 remote-endpoint = <&usb_1_ss1_qmpphy_out>; 926 }; 927 }; 928 929 port@2 { 930 reg = <2>; 931 932 retimer_ss1_con_sbu_out: endpoint { 933 remote-endpoint = <&pmic_glink_ss1_con_sbu_in>; 934 }; 935 }; 936 }; 937 }; 938}; 939 940&i2c8 { 941 clock-frequency = <400000>; 942 943 status = "okay"; 944 945 /* ASUSTeK, 0B05:0220 */ 946 keyboard@15 { 947 compatible = "hid-over-i2c"; 948 reg = <0x15>; 949 950 hid-descr-addr = <0x1>; 951 interrupts-extended = <&tlmm 67 IRQ_TYPE_LEVEL_LOW>; 952 953 pinctrl-0 = <&kybd_default>; 954 pinctrl-names = "default"; 955 956 wakeup-source; 957 }; 958}; 959 960&lpass_tlmm { 961 spkr_01_sd_n_active: spkr-01-sd-n-active-state { 962 pins = "gpio12"; 963 function = "gpio"; 964 drive-strength = <16>; 965 bias-disable; 966 output-low; 967 }; 968}; 969 970&lpass_vamacro { 971 pinctrl-0 = <&dmic01_default>; 972 pinctrl-names = "default"; 973 974 vdd-micb-supply = <&vreg_l1b_1p8>; 975 qcom,dmic-sample-rate = <4800000>; 976}; 977 978&mdss { 979 status = "okay"; 980}; 981 982&mdss_dp0 { 983 status = "okay"; 984}; 985 986&mdss_dp0_out { 987 link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>; 988}; 989 990&mdss_dp1 { 991 status = "okay"; 992}; 993 994&mdss_dp1_out { 995 link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>; 996}; 997 998&mdss_dp3 { 999 /delete-property/ #sound-dai-cells; 1000 1001 pinctrl-0 = <&edp0_hpd_default>; 1002 pinctrl-names = "default"; 1003 1004 status = "okay"; 1005 1006 aux-bus { 1007 panel: panel { 1008 compatible = "edp-panel"; 1009 power-supply = <&vreg_edp_3p3>; 1010 1011 port { 1012 edp_panel_in: endpoint { 1013 remote-endpoint = <&mdss_dp3_out>; 1014 }; 1015 }; 1016 }; 1017 }; 1018}; 1019 1020&mdss_dp3_out { 1021 data-lanes = <0 1 2 3>; 1022 link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>; 1023 1024 remote-endpoint = <&edp_panel_in>; 1025}; 1026 1027&mdss_dp3_phy { 1028 vdda-phy-supply = <&vreg_l3j_0p8>; 1029 vdda-pll-supply = <&vreg_l2j_1p2>; 1030 1031 status = "okay"; 1032}; 1033 1034&pcie4 { 1035 perst-gpios = <&tlmm 146 GPIO_ACTIVE_LOW>; 1036 wake-gpios = <&tlmm 148 GPIO_ACTIVE_LOW>; 1037 1038 pinctrl-0 = <&pcie4_default>; 1039 pinctrl-names = "default"; 1040 1041 status = "okay"; 1042}; 1043 1044&pcie4_phy { 1045 vdda-phy-supply = <&vreg_l3i_0p8>; 1046 vdda-pll-supply = <&vreg_l3e_1p2>; 1047 1048 status = "okay"; 1049}; 1050 1051&pcie6a { 1052 perst-gpios = <&tlmm 152 GPIO_ACTIVE_LOW>; 1053 wake-gpios = <&tlmm 154 GPIO_ACTIVE_LOW>; 1054 1055 vddpe-3v3-supply = <&vreg_nvme>; 1056 1057 pinctrl-0 = <&pcie6a_default>; 1058 pinctrl-names = "default"; 1059 1060 status = "okay"; 1061}; 1062 1063&pcie6a_phy { 1064 vdda-phy-supply = <&vreg_l1d_0p8>; 1065 vdda-pll-supply = <&vreg_l2j_1p2>; 1066 1067 status = "okay"; 1068}; 1069 1070&pm8550_gpios { 1071 rtmr0_default: rtmr0-reset-n-active-state { 1072 pins = "gpio10"; 1073 function = "normal"; 1074 power-source = <1>; 1075 bias-disable; 1076 input-disable; 1077 output-enable; 1078 }; 1079 1080 usb0_3p3_reg_en: usb0-3p3-reg-en-state { 1081 pins = "gpio11"; 1082 function = "normal"; 1083 power-source = <1>; 1084 bias-disable; 1085 input-disable; 1086 output-enable; 1087 }; 1088}; 1089 1090&pm8550ve_8_gpios { 1091 misc_3p3_reg_en: misc-3p3-reg-en-state { 1092 pins = "gpio6"; 1093 function = "normal"; 1094 power-source = <1>; 1095 bias-disable; 1096 input-disable; 1097 output-enable; 1098 drive-push-pull; 1099 qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; 1100 }; 1101}; 1102 1103&pm8550ve_9_gpios { 1104 usb0_1p8_reg_en: usb0-1p8-reg-en-state { 1105 pins = "gpio8"; 1106 function = "normal"; 1107 power-source = <1>; 1108 bias-disable; 1109 input-disable; 1110 output-enable; 1111 }; 1112}; 1113 1114&pmc8380_3_gpios { 1115 edp_bl_en: edp-bl-en-state { 1116 pins = "gpio4"; 1117 function = "normal"; 1118 power-source = <1>; 1119 input-disable; 1120 output-enable; 1121 }; 1122}; 1123 1124&pmc8380_5_gpios { 1125 usb0_pwr_1p15_reg_en: usb0-pwr-1p15-reg-en-state { 1126 pins = "gpio8"; 1127 function = "normal"; 1128 power-source = <1>; 1129 bias-disable; 1130 input-disable; 1131 output-enable; 1132 }; 1133}; 1134 1135&qupv3_0 { 1136 status = "okay"; 1137}; 1138 1139&qupv3_1 { 1140 status = "okay"; 1141}; 1142 1143&qupv3_2 { 1144 status = "okay"; 1145}; 1146 1147&smb2360_0 { 1148 status = "okay"; 1149}; 1150 1151&smb2360_0_eusb2_repeater { 1152 vdd18-supply = <&vreg_l3d_1p8>; 1153 vdd3-supply = <&vreg_l2b_3p0>; 1154}; 1155 1156&smb2360_1 { 1157 status = "okay"; 1158}; 1159 1160&smb2360_1_eusb2_repeater { 1161 vdd18-supply = <&vreg_l3d_1p8>; 1162 vdd3-supply = <&vreg_l14b_3p0>; 1163}; 1164 1165&spi10 { 1166 status = "disabled"; 1167 1168 /* Unknown device */ 1169}; 1170 1171&swr0 { 1172 status = "okay"; 1173 1174 pinctrl-0 = <&wsa_swr_active>, <&spkr_01_sd_n_active>; 1175 pinctrl-names = "default"; 1176 1177 /* WSA8845, Left Speaker */ 1178 left_spkr: speaker@0,0 { 1179 compatible = "sdw20217020400"; 1180 reg = <0 0>; 1181 reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>; 1182 #sound-dai-cells = <0>; 1183 sound-name-prefix = "SpkrLeft"; 1184 vdd-1p8-supply = <&vreg_l15b_1p8>; 1185 vdd-io-supply = <&vreg_l12b_1p2>; 1186 qcom,port-mapping = <1 2 3 7 10 13>; 1187 }; 1188 1189 /* WSA8845, Right Speaker */ 1190 right_spkr: speaker@0,1 { 1191 compatible = "sdw20217020400"; 1192 reg = <0 1>; 1193 reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>; 1194 #sound-dai-cells = <0>; 1195 sound-name-prefix = "SpkrRight"; 1196 vdd-1p8-supply = <&vreg_l15b_1p8>; 1197 vdd-io-supply = <&vreg_l12b_1p2>; 1198 qcom,port-mapping = <4 5 6 7 11 13>; 1199 }; 1200}; 1201 1202&swr1 { 1203 status = "okay"; 1204 1205 /* WCD9385 RX */ 1206 wcd_rx: codec@0,4 { 1207 compatible = "sdw20217010d00"; 1208 reg = <0 4>; 1209 qcom,rx-port-mapping = <1 2 3 4 5>; 1210 }; 1211}; 1212 1213&swr2 { 1214 status = "okay"; 1215 1216 /* WCD9385 TX */ 1217 wcd_tx: codec@0,3 { 1218 compatible = "sdw20217010d00"; 1219 reg = <0 3>; 1220 qcom,tx-port-mapping = <2 2 3 4>; 1221 }; 1222}; 1223 1224&tlmm { 1225 gpio-reserved-ranges = <44 4>, /* SPI11, TZ Protected */ 1226 <90 1>; /* Unknown, TZ Protected */ 1227 1228 cam_indicator_en: cam-indicator-en-state { 1229 pins = "gpio110"; 1230 function = "gpio"; 1231 drive-strength = <2>; 1232 bias-disable; 1233 }; 1234 1235 edp_reg_en: edp-reg-en-state { 1236 pins = "gpio70"; 1237 function = "gpio"; 1238 drive-strength = <16>; 1239 bias-disable; 1240 }; 1241 1242 eusb6_reset_n: eusb6-reset-n-state { 1243 pins = "gpio184"; 1244 function = "gpio"; 1245 drive-strength = <2>; 1246 bias-disable; 1247 output-low; 1248 }; 1249 1250 hall_int_n_default: hall-int-n-state { 1251 pins = "gpio92"; 1252 function = "gpio"; 1253 bias-disable; 1254 }; 1255 1256 hdtl_default: hdtl-default-state { 1257 pins = "gpio95"; 1258 function = "gpio"; 1259 }; 1260 1261 kybd_default: kybd-default-state { 1262 pins = "gpio67"; 1263 function = "gpio"; 1264 bias-pull-up; 1265 }; 1266 1267 nvme_reg_en: nvme-reg-en-state { 1268 pins = "gpio18"; 1269 function = "gpio"; 1270 drive-strength = <2>; 1271 bias-disable; 1272 }; 1273 1274 pcie4_default: pcie4-default-state { 1275 clkreq-n-pins { 1276 pins = "gpio147"; 1277 function = "pcie4_clk"; 1278 drive-strength = <2>; 1279 bias-pull-up; 1280 }; 1281 1282 perst-n-pins { 1283 pins = "gpio146"; 1284 function = "gpio"; 1285 drive-strength = <2>; 1286 bias-disable; 1287 }; 1288 1289 wake-n-pins { 1290 pins = "gpio148"; 1291 function = "gpio"; 1292 drive-strength = <2>; 1293 bias-pull-up; 1294 }; 1295 }; 1296 1297 pcie6a_default: pcie6a-default-state { 1298 clkreq-n-pins { 1299 pins = "gpio153"; 1300 function = "pcie6a_clk"; 1301 drive-strength = <2>; 1302 bias-pull-up; 1303 }; 1304 1305 perst-n-pins { 1306 pins = "gpio152"; 1307 function = "gpio"; 1308 drive-strength = <2>; 1309 bias-disable; 1310 }; 1311 1312 wake-n-pins { 1313 pins = "gpio154"; 1314 function = "gpio"; 1315 drive-strength = <2>; 1316 bias-pull-up; 1317 }; 1318 }; 1319 1320 rtmr1_default: rtmr1-reset-n-active-state { 1321 pins = "gpio176"; 1322 function = "gpio"; 1323 drive-strength = <2>; 1324 bias-disable; 1325 }; 1326 1327 tpad_default: tpad-default-state { 1328 pins = "gpio3"; 1329 function = "gpio"; 1330 bias-disable; 1331 }; 1332 1333 usb1_pwr_1p15_reg_en: usb1-pwr-1p15-reg-en-state { 1334 pins = "gpio188"; 1335 function = "gpio"; 1336 drive-strength = <2>; 1337 bias-disable; 1338 }; 1339 1340 usb1_pwr_1p8_reg_en: usb1-pwr-1p8-reg-en-state { 1341 pins = "gpio175"; 1342 function = "gpio"; 1343 drive-strength = <2>; 1344 bias-disable; 1345 }; 1346 1347 usb1_pwr_3p3_reg_en: usb1-pwr-3p3-reg-en-state { 1348 pins = "gpio186"; 1349 function = "gpio"; 1350 drive-strength = <2>; 1351 bias-disable; 1352 }; 1353 1354 wcd_default: wcd-reset-n-active-state { 1355 pins = "gpio191"; 1356 function = "gpio"; 1357 drive-strength = <16>; 1358 bias-disable; 1359 output-low; 1360 }; 1361 1362 wcn_bt_en: wcn-bt-en-state { 1363 pins = "gpio116"; 1364 function = "gpio"; 1365 drive-strength = <16>; 1366 bias-disable; 1367 }; 1368 1369 wcn_sw_en: wcn-sw-en-state { 1370 pins = "gpio214"; 1371 function = "gpio"; 1372 drive-strength = <2>; 1373 bias-disable; 1374 }; 1375 1376 wcn_wlan_en: wcn-wlan-en-state { 1377 pins = "gpio117"; 1378 function = "gpio"; 1379 drive-strength = <8>; 1380 bias-disable; 1381 }; 1382}; 1383 1384&uart21 { 1385 compatible = "qcom,geni-debug-uart"; 1386 1387 status = "okay"; 1388}; 1389 1390&usb_1_ss0_hsphy { 1391 vdd-supply = <&vreg_l3j_0p8>; 1392 vdda12-supply = <&vreg_l2j_1p2>; 1393 1394 phys = <&smb2360_0_eusb2_repeater>; 1395 1396 status = "okay"; 1397}; 1398 1399&usb_1_ss0_qmpphy { 1400 vdda-phy-supply = <&vreg_l2j_1p2>; 1401 vdda-pll-supply = <&vreg_l1j_0p9>; 1402 1403 status = "okay"; 1404}; 1405 1406&usb_1_ss0 { 1407 status = "okay"; 1408}; 1409 1410&usb_1_ss0_dwc3 { 1411 dr_mode = "host"; 1412}; 1413 1414&usb_1_ss0_dwc3_hs { 1415 remote-endpoint = <&pmic_glink_ss0_hs_in>; 1416}; 1417 1418&usb_1_ss0_qmpphy_out { 1419 remote-endpoint = <&retimer_ss0_ss_in>; 1420}; 1421 1422&usb_1_ss1_hsphy { 1423 vdd-supply = <&vreg_l3j_0p8>; 1424 vdda12-supply = <&vreg_l2j_1p2>; 1425 1426 phys = <&smb2360_1_eusb2_repeater>; 1427 1428 status = "okay"; 1429}; 1430 1431&usb_1_ss1_qmpphy { 1432 vdda-phy-supply = <&vreg_l2j_1p2>; 1433 vdda-pll-supply = <&vreg_l2d_0p9>; 1434 1435 status = "okay"; 1436}; 1437 1438&usb_1_ss1 { 1439 status = "okay"; 1440}; 1441 1442&usb_1_ss1_dwc3 { 1443 dr_mode = "host"; 1444}; 1445 1446&usb_1_ss1_dwc3_hs { 1447 remote-endpoint = <&pmic_glink_ss1_hs_in>; 1448}; 1449 1450&usb_1_ss1_qmpphy_out { 1451 remote-endpoint = <&retimer_ss1_ss_in>; 1452}; 1453 1454&usb_mp { 1455 status = "okay"; 1456}; 1457 1458&usb_mp_hsphy0 { 1459 vdd-supply = <&vreg_l2e_0p8>; 1460 vdda12-supply = <&vreg_l3e_1p2>; 1461 1462 status = "okay"; 1463}; 1464 1465&usb_mp_hsphy1 { 1466 vdd-supply = <&vreg_l2e_0p8>; 1467 vdda12-supply = <&vreg_l3e_1p2>; 1468 1469 phys = <&eusb6_repeater>; 1470 1471 status = "okay"; 1472}; 1473 1474&usb_mp_qmpphy0 { 1475 vdda-phy-supply = <&vreg_l3e_1p2>; 1476 vdda-pll-supply = <&vreg_l3c_0p9>; 1477 1478 status = "okay"; 1479}; 1480 1481&usb_mp_qmpphy1 { 1482 vdda-phy-supply = <&vreg_l3e_1p2>; 1483 vdda-pll-supply = <&vreg_l3c_0p9>; 1484 1485 status = "okay"; 1486};
~/
Read-only file preview.