sm8750-pmics.dtsi

  1// SPDX-License-Identifier: BSD-3-Clause
  2/*
  3 * Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
  4 */
  5
  6/ {
  7	thermal-zones {
  8		pm8550ve-d-thermal {
  9			polling-delay-passive = <100>;
 10
 11			thermal-sensors = <&pm8550ve_d_temp_alarm>;
 12
 13			trips {
 14				trip0 {
 15					temperature = <95000>;
 16					hysteresis = <0>;
 17					type = "passive";
 18				};
 19
 20				trip1 {
 21					temperature = <115000>;
 22					hysteresis = <0>;
 23					type = "hot";
 24				};
 25			};
 26		};
 27
 28		pm8550ve-f-thermal {
 29			polling-delay-passive = <100>;
 30
 31			thermal-sensors = <&pm8550ve_f_temp_alarm>;
 32
 33			trips {
 34				trip0 {
 35					temperature = <95000>;
 36					hysteresis = <0>;
 37					type = "passive";
 38				};
 39
 40				trip1 {
 41					temperature = <115000>;
 42					hysteresis = <0>;
 43					type = "hot";
 44				};
 45			};
 46		};
 47
 48		pm8550ve-g-thermal {
 49			polling-delay-passive = <100>;
 50
 51			thermal-sensors = <&pm8550ve_g_temp_alarm>;
 52
 53			trips {
 54				trip0 {
 55					temperature = <95000>;
 56					hysteresis = <0>;
 57					type = "passive";
 58				};
 59
 60				trip1 {
 61					temperature = <115000>;
 62					hysteresis = <0>;
 63					type = "hot";
 64				};
 65			};
 66		};
 67
 68		pm8550vs-j-thermal {
 69			polling-delay-passive = <100>;
 70
 71			thermal-sensors = <&pm8550vs_j_temp_alarm>;
 72
 73			trips {
 74				trip0 {
 75					temperature = <95000>;
 76					hysteresis = <0>;
 77					type = "passive";
 78				};
 79
 80				trip1 {
 81					temperature = <115000>;
 82					hysteresis = <0>;
 83					type = "hot";
 84				};
 85			};
 86		};
 87	};
 88};
 89
 90&spmi_bus {
 91	/* PM8550VE */
 92	pm8550ve_d: pmic@3 {
 93		compatible = "qcom,pm8550ve", "qcom,spmi-pmic";
 94		reg = <0x3 SPMI_USID>;
 95		#address-cells = <1>;
 96		#size-cells = <0>;
 97
 98		pm8550ve_d_temp_alarm: temp-alarm@a00 {
 99			compatible = "qcom,spmi-temp-alarm";
100			reg = <0xa00>;
101			interrupts = <0x3 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
102			#thermal-sensor-cells = <0>;
103		};
104
105		pm8550ve_d_gpios: gpio@8800 {
106			compatible = "qcom,pm8550ve-gpio", "qcom,spmi-gpio";
107			reg = <0x8800>;
108			gpio-controller;
109			gpio-ranges = <&pm8550ve_d_gpios 0 0 8>;
110			#gpio-cells = <2>;
111			interrupt-controller;
112			#interrupt-cells = <2>;
113		};
114	};
115
116	pm8550ve_f: pmic@5 {
117		compatible = "qcom,pm8550ve", "qcom,spmi-pmic";
118		reg = <0x5 SPMI_USID>;
119		#address-cells = <1>;
120		#size-cells = <0>;
121
122		pm8550ve_f_temp_alarm: temp-alarm@a00 {
123			compatible = "qcom,spmi-temp-alarm";
124			reg = <0xa00>;
125			interrupts = <0x5 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
126			#thermal-sensor-cells = <0>;
127		};
128
129		pm8550ve_f_gpios: gpio@8800 {
130			compatible = "qcom,pm8550ve-gpio", "qcom,spmi-gpio";
131			reg = <0x8800>;
132			gpio-controller;
133			gpio-ranges = <&pm8550ve_f_gpios 0 0 6>;
134			#gpio-cells = <2>;
135			interrupt-controller;
136			#interrupt-cells = <2>;
137		};
138	};
139
140	pm8550ve_g: pmic@6 {
141		compatible = "qcom,pm8550ve", "qcom,spmi-pmic";
142		reg = <0x6 SPMI_USID>;
143		#address-cells = <1>;
144		#size-cells = <0>;
145
146		pm8550ve_g_temp_alarm: temp-alarm@a00 {
147			compatible = "qcom,spmi-temp-alarm";
148			reg = <0xa00>;
149			interrupts = <0x6 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
150			#thermal-sensor-cells = <0>;
151		};
152
153		pm8550ve_g_gpios: gpio@8800 {
154			compatible = "qcom,pm8550ve-gpio", "qcom,spmi-gpio";
155			reg = <0x8800>;
156			gpio-controller;
157			gpio-ranges = <&pm8550ve_g_gpios 0 0 8>;
158			#gpio-cells = <2>;
159			interrupt-controller;
160			#interrupt-cells = <2>;
161		};
162	};
163
164	/* PM8550VS */
165	pm8550vs_j: pmic@9 {
166		compatible = "qcom,pm8550vs", "qcom,spmi-pmic";
167		reg = <0x9 SPMI_USID>;
168		#address-cells = <1>;
169		#size-cells = <0>;
170
171		pm8550vs_j_temp_alarm: temp-alarm@a00 {
172			compatible = "qcom,spmi-temp-alarm";
173			reg = <0xa00>;
174			interrupts = <0x9 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
175			#thermal-sensor-cells = <0>;
176		};
177
178		pm8550vs_j_gpios: gpio@8800 {
179			compatible = "qcom,pm8550vs-gpio", "qcom,spmi-gpio";
180			reg = <0x8800>;
181			gpio-controller;
182			gpio-ranges = <&pm8550vs_j_gpios 0 0 6>;
183			#gpio-cells = <2>;
184			interrupt-controller;
185			#interrupt-cells = <2>;
186		};
187	};
188};