pmm8155au_1.dtsi

  1// SPDX-License-Identifier: BSD-3-Clause
  2/*
  3 * Copyright (c) 2021, Linaro Limited
  4 */
  5
  6#include <dt-bindings/input/input.h>
  7#include <dt-bindings/interrupt-controller/irq.h>
  8#include <dt-bindings/spmi/spmi.h>
  9#include <dt-bindings/iio/qcom,spmi-vadc.h>
 10
 11/ {
 12	thermal-zones {
 13		pmm8155au-1-thermal {
 14			polling-delay-passive = <100>;
 15
 16			thermal-sensors = <&pmm8155au_1_temp>;
 17
 18			trips {
 19				trip0 {
 20					temperature = <95000>;
 21					hysteresis = <0>;
 22					type = "passive";
 23				};
 24
 25				trip1 {
 26					temperature = <115000>;
 27					hysteresis = <0>;
 28					type = "hot";
 29				};
 30
 31				trip2 {
 32					temperature = <145000>;
 33					hysteresis = <0>;
 34					type = "critical";
 35				};
 36			};
 37		};
 38	};
 39};
 40
 41&spmi_bus {
 42	pmic@0 {
 43		compatible = "qcom,pmm8155au", "qcom,spmi-pmic";
 44		reg = <0x0 SPMI_USID>;
 45		#address-cells = <1>;
 46		#size-cells = <0>;
 47
 48		pon: pon@800 {
 49			compatible = "qcom,pm8916-pon";
 50			reg = <0x0800>;
 51			pwrkey {
 52				compatible = "qcom,pm8941-pwrkey";
 53				interrupts = <0x0 0x8 0x0 IRQ_TYPE_EDGE_BOTH>;
 54				debounce = <15625>;
 55				bias-pull-up;
 56				linux,code = <KEY_POWER>;
 57
 58				status = "disabled";
 59			};
 60		};
 61
 62		pmm8155au_1_temp: temp-alarm@2400 {
 63			compatible = "qcom,spmi-temp-alarm";
 64			reg = <0x2400>;
 65			interrupts = <0x0 0x24 0x0 IRQ_TYPE_EDGE_BOTH>;
 66			io-channels = <&pmm8155au_1_adc ADC5_DIE_TEMP>;
 67			io-channel-names = "thermal";
 68			#thermal-sensor-cells = <0>;
 69		};
 70
 71		pmm8155au_1_adc: adc@3100 {
 72			compatible = "qcom,spmi-adc5";
 73			reg = <0x3100>;
 74			#address-cells = <1>;
 75			#size-cells = <0>;
 76			#io-channel-cells = <1>;
 77			interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
 78
 79			channel@0 {
 80				reg = <ADC5_REF_GND>;
 81				qcom,pre-scaling = <1 1>;
 82				label = "ref_gnd";
 83			};
 84
 85			channel@1 {
 86				reg = <ADC5_1P25VREF>;
 87				qcom,pre-scaling = <1 1>;
 88				label = "vref_1p25";
 89			};
 90
 91			channel@6 {
 92				reg = <ADC5_DIE_TEMP>;
 93				qcom,pre-scaling = <1 1>;
 94				label = "die_temp";
 95			};
 96		};
 97
 98		pmm8155au_1_adc_tm: adc-tm@3500 {
 99			compatible = "qcom,spmi-adc-tm5";
100			reg = <0x3500>;
101			interrupts = <0x0 0x35 0x0 IRQ_TYPE_EDGE_RISING>;
102			#thermal-sensor-cells = <1>;
103			#address-cells = <1>;
104			#size-cells = <0>;
105			status = "disabled";
106		};
107
108		pmm8155au_1_rtc: rtc@6000 {
109			compatible = "qcom,pm8941-rtc";
110			reg = <0x6000>, <0x6100>;
111			reg-names = "rtc", "alarm";
112			interrupts = <0x0 0x61 0x1 IRQ_TYPE_NONE>;
113
114			status = "disabled";
115		};
116
117		pmm8155au_1_gpios: gpio@c000 {
118			compatible = "qcom,pmm8155au-gpio", "qcom,spmi-gpio";
119			reg = <0xc000>;
120			gpio-controller;
121			#gpio-cells = <2>;
122			gpio-ranges = <&pmm8155au_1_gpios 0 0 10>;
123			interrupt-controller;
124			#interrupt-cells = <2>;
125		};
126	};
127
128	pmic@1 {
129		compatible = "qcom,pmm8155au", "qcom,spmi-pmic";
130		reg = <0x1 SPMI_USID>;
131		#address-cells = <1>;
132		#size-cells = <0>;
133	};
134};