pmi8950.dtsi

  1// SPDX-License-Identifier: GPL-2.0
  2// Copyright (c) 2019, AngeloGioacchino Del Regno <kholk11@gmail.com>
  3
  4#include <dt-bindings/iio/qcom,spmi-vadc.h>
  5#include <dt-bindings/interrupt-controller/irq.h>
  6#include <dt-bindings/spmi/spmi.h>
  7
  8&spmi_bus {
  9	pmic@2 {
 10		compatible = "qcom,pmi8950", "qcom,spmi-pmic";
 11		reg = <0x2 SPMI_USID>;
 12		#address-cells = <1>;
 13		#size-cells = <0>;
 14
 15		pmi8950_vadc: adc@3100 {
 16			compatible = "qcom,spmi-vadc";
 17			reg = <0x3100>;
 18			interrupts = <0x2 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
 19			#address-cells = <1>;
 20			#size-cells = <0>;
 21			#io-channel-cells = <1>;
 22
 23			channel@0 {
 24				reg = <VADC_USBIN>;
 25				qcom,pre-scaling = <1 20>;
 26				label = "usbin";
 27			};
 28
 29			channel@1 {
 30				reg = <VADC_DCIN>;
 31				qcom,pre-scaling = <1 20>;
 32				label = "dcin";
 33			};
 34
 35			channel@2 {
 36				reg = <VADC_VCHG_SNS>;
 37				qcom,pre-scaling = <1 3>;
 38				label = "vchg_sns";
 39			};
 40
 41			channel@9 {
 42				reg = <VADC_REF_625MV>;
 43				qcom,pre-scaling = <1 1>;
 44				label = "ref_625mv";
 45			};
 46
 47			channel@a {
 48				reg = <VADC_REF_1250MV>;
 49				qcom,pre-scaling = <1 1>;
 50				label = "ref_1250mv";
 51			};
 52
 53			channel@d {
 54				reg = <VADC_SPARE2>;
 55				qcom,pre-scaling = <1 1>;
 56				label = "chg_temp";
 57			};
 58
 59			channel@e {
 60				reg = <VADC_GND_REF>;
 61			};
 62
 63			channel@f {
 64				reg = <VADC_VDD_VADC>;
 65			};
 66		};
 67
 68		pmi8950_mpps: mpps@a000 {
 69			compatible = "qcom,pmi8950-mpp", "qcom,spmi-mpp";
 70			reg = <0xa000>;
 71			gpio-controller;
 72			gpio-ranges = <&pmi8950_mpps 0 0 4>;
 73			#gpio-cells = <2>;
 74			interrupt-controller;
 75			#interrupt-cells = <2>;
 76		};
 77
 78		pmi8950_gpios: gpio@c000 {
 79			compatible = "qcom,pmi8950-gpio", "qcom,spmi-gpio";
 80			reg = <0xc000>;
 81			gpio-controller;
 82			gpio-ranges = <&pmi8950_gpios 0 0 2>;
 83			#gpio-cells = <2>;
 84			interrupt-controller;
 85			#interrupt-cells = <2>;
 86		};
 87	};
 88
 89	pmic@3 {
 90		compatible = "qcom,pmi8950", "qcom,spmi-pmic";
 91		reg = <0x3 SPMI_USID>;
 92		#address-cells = <1>;
 93		#size-cells = <0>;
 94
 95		labibb {
 96			compatible = "qcom,pmi8950-lab-ibb",
 97				     "qcom,pmi8998-lab-ibb";
 98
 99			ibb: ibb {
100				interrupts = <0x3 0xdc 0x2 IRQ_TYPE_EDGE_RISING>,
101					     <0x3 0xdc 0x0 IRQ_TYPE_LEVEL_LOW>;
102				interrupt-names = "sc-err", "ocp";
103			};
104
105			lab: lab {
106				interrupts = <0x3 0xde 0x1 IRQ_TYPE_EDGE_RISING>,
107					     <0x3 0xde 0x0 IRQ_TYPE_LEVEL_LOW>;
108				interrupt-names = "sc-err", "ocp";
109			};
110		};
111
112		pmi8950_pwm: pwm {
113			compatible = "qcom,pmi8950-pwm";
114			#pwm-cells = <2>;
115
116			status = "disabled";
117		};
118
119		pmi8950_wled: leds@d800 {
120			compatible = "qcom,pmi8950-wled";
121			reg = <0xd800>, <0xd900>;
122			interrupts = <0x3 0xd8 0x1 IRQ_TYPE_EDGE_RISING>,
123				     <0x3 0xd8 0x2 IRQ_TYPE_EDGE_RISING>;
124			interrupt-names = "ovp", "short";
125			label = "backlight";
126
127			status = "disabled";
128		};
129	};
130};