pm8998.dtsi

  1// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
  2/* Copyright 2018 Google LLC. */
  3
  4#include <dt-bindings/iio/qcom,spmi-vadc.h>
  5#include <dt-bindings/input/linux-event-codes.h>
  6#include <dt-bindings/interrupt-controller/irq.h>
  7#include <dt-bindings/spmi/spmi.h>
  8#include <dt-bindings/thermal/thermal.h>
  9
 10/ {
 11	thermal-zones {
 12		pm8998-thermal {
 13			polling-delay-passive = <250>;
 14
 15			thermal-sensors = <&pm8998_temp>;
 16
 17			trips {
 18				pm8998_alert0: pm8998-alert0 {
 19					temperature = <105000>;
 20					hysteresis = <2000>;
 21					type = "passive";
 22				};
 23				pm8998_crit: pm8998-crit {
 24					temperature = <125000>;
 25					hysteresis = <2000>;
 26					type = "critical";
 27				};
 28			};
 29		};
 30	};
 31};
 32
 33&spmi_bus {
 34	pm8998_lsid0: pmic@0 {
 35		compatible = "qcom,pm8998", "qcom,spmi-pmic";
 36		reg = <0x0 SPMI_USID>;
 37		#address-cells = <1>;
 38		#size-cells = <0>;
 39
 40		pm8998_pon: pon@800 {
 41			compatible = "qcom,pm8998-pon";
 42
 43			reg = <0x800>;
 44			mode-bootloader = <0x2>;
 45			mode-recovery = <0x1>;
 46
 47			pm8998_pwrkey: pwrkey {
 48				compatible = "qcom,pm8941-pwrkey";
 49				interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
 50				debounce = <15625>;
 51				bias-pull-up;
 52				linux,code = <KEY_POWER>;
 53			};
 54
 55			pm8998_resin: resin {
 56				compatible = "qcom,pm8941-resin";
 57				interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
 58				debounce = <15625>;
 59				bias-pull-up;
 60				status = "disabled";
 61			};
 62		};
 63
 64		pm8998_temp: temp-alarm@2400 {
 65			compatible = "qcom,spmi-temp-alarm";
 66			reg = <0x2400>;
 67			interrupts = <0x0 0x24 0x0 IRQ_TYPE_EDGE_RISING>;
 68			io-channels = <&pm8998_adc ADC5_DIE_TEMP>;
 69			io-channel-names = "thermal";
 70			#thermal-sensor-cells = <0>;
 71		};
 72
 73		pm8998_coincell: charger@2800 {
 74			compatible = "qcom,pm8998-coincell", "qcom,pm8941-coincell";
 75			reg = <0x2800>;
 76
 77			status = "disabled";
 78		};
 79
 80		pm8998_adc: adc@3100 {
 81			compatible = "qcom,spmi-adc-rev2";
 82			reg = <0x3100>;
 83			interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
 84			#address-cells = <1>;
 85			#size-cells = <0>;
 86			#io-channel-cells = <1>;
 87
 88			channel@6 {
 89				reg = <ADC5_DIE_TEMP>;
 90				label = "die_temp";
 91			};
 92		};
 93
 94		pm8998_adc_tm: adc-tm@3400 {
 95			compatible = "qcom,spmi-adc-tm-hc";
 96			reg = <0x3400>;
 97			interrupts = <0x0 0x34 0x0 IRQ_TYPE_EDGE_RISING>;
 98			#thermal-sensor-cells = <1>;
 99			#address-cells = <1>;
100			#size-cells = <0>;
101			status = "disabled";
102		};
103
104		rtc@6000 {
105			compatible = "qcom,pm8941-rtc";
106			reg = <0x6000>, <0x6100>;
107			reg-names = "rtc", "alarm";
108			interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
109		};
110
111		pm8998_gpios: gpio@c000 {
112			compatible = "qcom,pm8998-gpio", "qcom,spmi-gpio";
113			reg = <0xc000>;
114			gpio-controller;
115			gpio-ranges = <&pm8998_gpios 0 0 26>;
116			#gpio-cells = <2>;
117			interrupt-controller;
118			#interrupt-cells = <2>;
119		};
120
121	};
122
123	pm8998_lsid1: pmic@1 {
124		compatible = "qcom,pm8998", "qcom,spmi-pmic";
125		reg = <0x1 SPMI_USID>;
126		#address-cells = <1>;
127		#size-cells = <0>;
128	};
129};