pm8953.dtsi

  1// SPDX-License-Identifier: BSD-3-Clause
  2/* Copyright (c) 2022, The Linux Foundation. All rights reserved. */
  3
  4#include <dt-bindings/iio/qcom,spmi-vadc.h>
  5#include <dt-bindings/interrupt-controller/irq.h>
  6#include <dt-bindings/input/linux-event-codes.h>
  7#include <dt-bindings/spmi/spmi.h>
  8
  9/ {
 10	thermal-zones {
 11		pm8953-thermal {
 12			thermal-sensors = <&pm8953_temp>;
 13
 14			trips {
 15				trip0 {
 16					temperature = <105000>;
 17					hysteresis = <0>;
 18					type = "passive";
 19				};
 20
 21				trip1 {
 22					temperature = <125000>;
 23					hysteresis = <0>;
 24					type = "hot";
 25				};
 26
 27				trip2 {
 28					temperature = <145000>;
 29					hysteresis = <0>;
 30					type = "critical";
 31				};
 32			};
 33		};
 34	};
 35};
 36
 37&spmi_bus {
 38	pmic@0 {
 39		compatible = "qcom,pm8953", "qcom,spmi-pmic";
 40		reg = <0 SPMI_USID>;
 41		#address-cells = <1>;
 42		#size-cells = <0>;
 43
 44		pm8953_pon: pon@800 {
 45			compatible = "qcom,pm8916-pon";
 46			reg = <0x800>;
 47			mode-bootloader = <0x2>;
 48			mode-recovery = <0x1>;
 49
 50			pwrkey {
 51				compatible = "qcom,pm8941-pwrkey";
 52				interrupts = <0x00 0x08 0 IRQ_TYPE_EDGE_BOTH>;
 53				debounce = <15625>;
 54				bias-pull-up;
 55				linux,code = <KEY_POWER>;
 56			};
 57
 58			pm8953_resin: resin {
 59				compatible = "qcom,pm8941-resin";
 60				interrupts = <0x00 0x08 1 IRQ_TYPE_EDGE_BOTH>;
 61				debounce = <15625>;
 62				bias-pull-up;
 63				status = "disabled";
 64			};
 65		};
 66
 67		pm8953_temp: temp-alarm@2400 {
 68			compatible = "qcom,spmi-temp-alarm";
 69			reg = <0x2400>;
 70			interrupts = <0x0 0x24 0x0 IRQ_TYPE_EDGE_RISING>;
 71			io-channels = <&pm8953_vadc VADC_DIE_TEMP>;
 72			io-channel-names = "thermal";
 73			#thermal-sensor-cells = <0>;
 74		};
 75
 76		pm8953_vadc: adc@3100 {
 77			compatible = "qcom,spmi-vadc";
 78			reg = <0x3100>;
 79			interrupts = <0x00 0x31 0x00 0x01>;
 80			#address-cells = <1>;
 81			#size-cells = <0>;
 82			#io-channel-cells = <1>;
 83
 84			channel@8 {
 85				reg = <VADC_DIE_TEMP>;
 86			};
 87			channel@9 {
 88				reg = <VADC_REF_625MV>;
 89			};
 90			channel@a {
 91				reg = <VADC_REF_1250MV>;
 92			};
 93			channel@c {
 94				reg = <VADC_SPARE1>;
 95			};
 96			channel@e {
 97				reg = <VADC_GND_REF>;
 98			};
 99			channel@f {
100				reg = <VADC_VDD_VADC>;
101			};
102		};
103
104		rtc@6000 {
105			compatible = "qcom,pm8941-rtc";
106			reg = <0x6000>, <0x6100>;
107			reg-names = "rtc", "alarm";
108			interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
109		};
110
111		pm8953_gpios: gpio@c000 {
112			compatible = "qcom,pm8953-gpio", "qcom,spmi-gpio";
113			reg = <0xc000>;
114			gpio-controller;
115			gpio-ranges = <&pm8953_gpios 0 0 8>;
116			#gpio-cells = <2>;
117			interrupt-controller;
118			#interrupt-cells = <2>;
119		};
120	};
121
122	pmic@1 {
123		compatible = "qcom,pm8953", "qcom,spmi-pmic";
124		reg = <1 SPMI_USID>;
125		#address-cells = <1>;
126		#size-cells = <0>;
127	};
128};