pm660.dtsi

  1// SPDX-License-Identifier: BSD-3-Clause
  2/*
  3 * Copyright (c) 2020, Konrad Dybcio
  4 */
  5
  6#include <dt-bindings/iio/qcom,spmi-vadc.h>
  7#include <dt-bindings/input/linux-event-codes.h>
  8#include <dt-bindings/interrupt-controller/irq.h>
  9#include <dt-bindings/spmi/spmi.h>
 10#include <dt-bindings/thermal/thermal.h>
 11
 12/ {
 13	thermal-zones {
 14		pm660-thermal {
 15			polling-delay-passive = <250>;
 16
 17			thermal-sensors = <&pm660_temp>;
 18
 19			trips {
 20				pm660_alert0: pm660-alert0 {
 21					temperature = <95000>;
 22					hysteresis = <2000>;
 23					type = "passive";
 24				};
 25				pm660_crit: pm660-crit {
 26					temperature = <125000>;
 27					hysteresis = <2000>;
 28					type = "critical";
 29				};
 30			};
 31		};
 32	};
 33};
 34
 35&spmi_bus {
 36
 37	pmic@0 {
 38		compatible = "qcom,pm660", "qcom,spmi-pmic";
 39		reg = <0x0 SPMI_USID>;
 40		#address-cells = <1>;
 41		#size-cells = <0>;
 42
 43		rtc@6000 {
 44			compatible = "qcom,pm8941-rtc";
 45			reg = <0x6000>, <0x6100>;
 46			reg-names = "rtc", "alarm";
 47			interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
 48		};
 49
 50		pon: pon@800 {
 51			compatible = "qcom,pm8998-pon";
 52			reg = <0x800>;
 53			mode-bootloader = <0x2>;
 54			mode-recovery = <0x1>;
 55
 56			pon_pwrkey: pwrkey {
 57				compatible = "qcom,pm8941-pwrkey";
 58				interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
 59				debounce = <15625>;
 60				bias-pull-up;
 61				linux,code = <KEY_POWER>;
 62
 63				status = "disabled";
 64			};
 65
 66			pon_resin: resin {
 67				compatible = "qcom,pm8941-resin";
 68				interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
 69				debounce = <15625>;
 70				bias-pull-up;
 71
 72				status = "disabled";
 73			};
 74		};
 75
 76		pm660_charger: charger@1000 {
 77			compatible = "qcom,pm660-charger";
 78			reg = <0x1000>;
 79
 80			interrupts = <0x0 0x13 0x4 IRQ_TYPE_EDGE_BOTH>,
 81				     <0x0 0x12 0x2 IRQ_TYPE_EDGE_BOTH>,
 82				     <0x0 0x16 0x1 IRQ_TYPE_EDGE_RISING>,
 83				     <0x0 0x13 0x6 IRQ_TYPE_EDGE_RISING>;
 84			interrupt-names = "usb-plugin", "bat-ov", "wdog-bark", "usbin-icl-change";
 85
 86			io-channels = <&pm660_rradc 3>,
 87				      <&pm660_rradc 4>;
 88			io-channel-names = "usbin_i", "usbin_v";
 89
 90			status = "disabled";
 91		};
 92
 93		pm660_temp: temp-alarm@2400 {
 94			compatible = "qcom,spmi-temp-alarm";
 95			reg = <0x2400>;
 96			interrupts = <0x0 0x24 0x0 IRQ_TYPE_EDGE_RISING>;
 97			io-channels = <&pm660_adc ADC5_DIE_TEMP>;
 98			io-channel-names = "thermal";
 99			#thermal-sensor-cells = <0>;
100		};
101
102		pm660_adc: adc@3100 {
103			compatible = "qcom,spmi-adc-rev2";
104			reg = <0x3100>;
105			interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
106			#address-cells = <1>;
107			#size-cells = <0>;
108			#io-channel-cells = <1>;
109
110			channel@0 {
111				reg = <ADC5_REF_GND>;
112				qcom,decimation = <1024>;
113				qcom,pre-scaling = <1 1>;
114				label = "ref_gnd";
115			};
116
117			channel@1 {
118				reg = <ADC5_1P25VREF>;
119				qcom,decimation = <1024>;
120				qcom,pre-scaling = <1 1>;
121				label = "vref_1p25";
122			};
123
124			channel@6 {
125				reg = <ADC5_DIE_TEMP>;
126				qcom,decimation = <1024>;
127				qcom,pre-scaling = <1 1>;
128				label = "die_temp";
129			};
130
131			channel@4c {
132				reg = <ADC5_XO_THERM_100K_PU>;
133				qcom,pre-scaling = <1 1>;
134				qcom,decimation = <1024>;
135				qcom,hw-settle-time = <200>;
136				qcom,ratiometric;
137				label = "xo_therm";
138			};
139
140			channel@4d {
141				reg = <ADC5_AMUX_THM1_100K_PU>;
142				qcom,pre-scaling = <1 1>;
143				qcom,decimation = <1024>;
144				qcom,hw-settle-time = <200>;
145				qcom,ratiometric;
146				label = "msm_therm";
147			};
148
149			channel@4e {
150				reg = <ADC5_AMUX_THM2_100K_PU>;
151				qcom,pre-scaling = <1 1>;
152				qcom,decimation = <1024>;
153				qcom,hw-settle-time = <200>;
154				qcom,ratiometric;
155				label = "emmc_therm";
156			};
157
158			channel@4f {
159				reg = <ADC5_AMUX_THM3_100K_PU>;
160				qcom,pre-scaling = <1 1>;
161				qcom,decimation = <1024>;
162				qcom,hw-settle-time = <200>;
163				qcom,ratiometric;
164				label = "pa_therm0";
165			};
166
167			channel@50 {
168				reg = <ADC5_AMUX_THM4_100K_PU>;
169				qcom,pre-scaling = <1 1>;
170				qcom,decimation = <1024>;
171				qcom,hw-settle-time = <200>;
172				qcom,ratiometric;
173				label = "pa_therm1";
174			};
175
176			channel@51 {
177				reg = <ADC5_AMUX_THM5_100K_PU>;
178				qcom,pre-scaling = <1 1>;
179				qcom,decimation = <1024>;
180				qcom,hw-settle-time = <200>;
181				qcom,ratiometric;
182				label = "quiet_therm";
183			};
184
185			channel@83 {
186				reg = <ADC5_VPH_PWR>;
187				qcom,decimation = <1024>;
188				qcom,pre-scaling = <1 3>;
189				label = "vph_pwr";
190			};
191
192			channel@85 {
193				reg = <ADC5_VCOIN>;
194				qcom,decimation = <1024>;
195				qcom,pre-scaling = <1 3>;
196				label = "vcoin";
197			};
198		};
199
200		pm660_rradc: adc@4500 {
201			compatible = "qcom,pm660-rradc";
202			reg = <0x4500>;
203			#io-channel-cells = <1>;
204
205			status = "disabled";
206		};
207
208		pm660_gpios: gpio@c000 {
209			compatible = "qcom,pm660-gpio", "qcom,spmi-gpio";
210			reg = <0xc000>;
211			gpio-controller;
212			gpio-ranges = <&pm660_gpios 0 0 13>;
213			#gpio-cells = <2>;
214			interrupt-controller;
215			#interrupt-cells = <2>;
216		};
217	};
218
219	pmic@1 {
220		compatible = "qcom,pm660", "qcom,spmi-pmic";
221		reg = <0x1 SPMI_USID>;
222		#address-cells = <1>;
223		#size-cells = <0>;
224
225		pm660_spmi_regulators: regulators {
226			compatible = "qcom,pm660-regulators";
227		};
228	};
229};