pm6150l.dtsi

  1// SPDX-License-Identifier: BSD-3-Clause
  2/*
  3 * Copyright (c) 2019, The Linux Foundation. All rights reserved.
  4 */
  5
  6#include <dt-bindings/iio/qcom,spmi-vadc.h>
  7#include <dt-bindings/interrupt-controller/irq.h>
  8#include <dt-bindings/spmi/spmi.h>
  9
 10/ {
 11	thermal-zones {
 12		pm6150l-thermal {
 13			thermal-sensors = <&pm6150l_temp>;
 14
 15			trips {
 16				trip0 {
 17					temperature = <95000>;
 18					hysteresis = <0>;
 19					type = "passive";
 20				};
 21
 22				trip1 {
 23					temperature = <115000>;
 24					hysteresis = <0>;
 25					type = "hot";
 26				};
 27
 28				trip2 {
 29					temperature = <125000>;
 30					hysteresis = <0>;
 31					type = "critical";
 32				};
 33			};
 34		};
 35	};
 36};
 37
 38&spmi_bus {
 39	pm6150l_lsid4: pmic@4 {
 40		compatible = "qcom,pm6150l", "qcom,spmi-pmic";
 41		reg = <0x4 SPMI_USID>;
 42		#address-cells = <1>;
 43		#size-cells = <0>;
 44
 45		pm6150l_temp: temp-alarm@2400 {
 46			compatible = "qcom,spmi-temp-alarm";
 47			reg = <0x2400>;
 48			interrupts = <0x4 0x24 0x0 IRQ_TYPE_EDGE_BOTH>;
 49			#thermal-sensor-cells = <0>;
 50		};
 51
 52		pm6150l_adc: adc@3100 {
 53			compatible = "qcom,spmi-adc5";
 54			reg = <0x3100>;
 55			interrupts = <0x4 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
 56			#address-cells = <1>;
 57			#size-cells = <0>;
 58			#io-channel-cells = <1>;
 59
 60			channel@0 {
 61				reg = <ADC5_REF_GND>;
 62				qcom,pre-scaling = <1 1>;
 63				label = "ref_gnd";
 64			};
 65
 66			channel@1 {
 67				reg = <ADC5_1P25VREF>;
 68				qcom,pre-scaling = <1 1>;
 69				label = "vref_1p25";
 70			};
 71
 72			channel@6 {
 73				reg = <ADC5_DIE_TEMP>;
 74				qcom,pre-scaling = <1 1>;
 75				label = "die_temp";
 76			};
 77
 78			channel@83 {
 79				reg = <ADC5_VPH_PWR>;
 80				qcom,pre-scaling = <1 3>;
 81				label = "vph_pwr";
 82			};
 83		};
 84
 85		pm6150l_adc_tm: adc-tm@3500 {
 86			compatible = "qcom,spmi-adc-tm5";
 87			reg = <0x3500>;
 88			interrupts = <0x4 0x35 0x0 IRQ_TYPE_EDGE_RISING>;
 89			#thermal-sensor-cells = <1>;
 90			#address-cells = <1>;
 91			#size-cells = <0>;
 92			status = "disabled";
 93		};
 94
 95		pm6150l_gpios: gpio@c000 {
 96			compatible = "qcom,pm6150l-gpio", "qcom,spmi-gpio";
 97			reg = <0xc000>;
 98			gpio-controller;
 99			gpio-ranges = <&pm6150l_gpios 0 0 12>;
100			#gpio-cells = <2>;
101			interrupt-controller;
102			#interrupt-cells = <2>;
103		};
104	};
105
106	pm6150l_lsid5: pmic@5 {
107		compatible = "qcom,pm6150l", "qcom,spmi-pmic";
108		reg = <0x5 SPMI_USID>;
109		#address-cells = <1>;
110		#size-cells = <0>;
111
112		pm6150l_flash: led-controller@d300 {
113			compatible = "qcom,pm6150l-flash-led", "qcom,spmi-flash-led";
114			reg = <0xd300>;
115			status = "disabled";
116		};
117
118		pm6150l_lpg: pwm {
119			compatible = "qcom,pm6150l-lpg", "qcom,pm8150l-lpg";
120
121			#address-cells = <1>;
122			#size-cells = <0>;
123			#pwm-cells = <2>;
124
125			status = "disabled";
126		};
127
128		pm6150l_wled: leds@d800 {
129			compatible = "qcom,pm6150l-wled";
130			reg = <0xd800>, <0xd900>;
131			interrupts = <0x5 0xd8 0x1 IRQ_TYPE_EDGE_RISING>,
132				     <0x5 0xd8 0x2 IRQ_TYPE_EDGE_RISING>;
133			interrupt-names = "ovp", "short";
134			label = "backlight";
135
136			status = "disabled";
137		};
138	};
139};