msm8916-ufi.dtsi

  1// SPDX-License-Identifier: GPL-2.0-only
  2
  3#include "msm8916-pm8916.dtsi"
  4
  5#include <dt-bindings/gpio/gpio.h>
  6#include <dt-bindings/leds/common.h>
  7
  8/ {
  9	chassis-type = "embedded";
 10
 11	aliases {
 12		mmc0 = &sdhc_1; /* eMMC */
 13		serial0 = &blsp_uart2;
 14	};
 15
 16	chosen {
 17		stdout-path = "serial0";
 18	};
 19
 20	gpio-keys {
 21		compatible = "gpio-keys";
 22
 23		pinctrl-0 = <&button_default>;
 24		pinctrl-names = "default";
 25
 26		label = "GPIO Buttons";
 27
 28		/* GPIO is board-specific */
 29		button_restart: button-restart {
 30			label = "Restart";
 31			linux,code = <KEY_RESTART>;
 32		};
 33	};
 34
 35	leds {
 36		compatible = "gpio-leds";
 37
 38		pinctrl-0 = <&gpio_leds_default>;
 39		pinctrl-names = "default";
 40
 41		/*
 42		 * GPIOs are board-specific.
 43		 * Functions and default-states defined here are fallbacks.
 44		 * Feel free to override them if your board is different.
 45		 */
 46		led_r: led-r {
 47			color = <LED_COLOR_ID_RED>;
 48			default-state = "on";
 49			function = LED_FUNCTION_POWER;
 50		};
 51
 52		led_g: led-g {
 53			color = <LED_COLOR_ID_GREEN>;
 54			default-state = "off";
 55			function = LED_FUNCTION_WLAN;
 56		};
 57
 58		led_b: led-b {
 59			color = <LED_COLOR_ID_BLUE>;
 60			default-state = "off";
 61			function = LED_FUNCTION_WAN;
 62		};
 63	};
 64};
 65
 66&bam_dmux {
 67	status = "okay";
 68};
 69
 70&bam_dmux_dma {
 71	status = "okay";
 72};
 73
 74&blsp_uart2 {
 75	pinctrl-0 = <&blsp_uart2_console_default>;
 76	pinctrl-1 = <&blsp_uart2_console_sleep>;
 77	pinctrl-names = "default", "sleep";
 78	status = "okay";
 79};
 80
 81/* Remove &mdss_dsi0_phy from clocks to make sure that gcc probes with display disabled */
 82&gcc {
 83	clocks = <&xo_board>, <&sleep_clk>, <0>, <0>, <0>, <0>, <0>;
 84};
 85
 86&mba_mem {
 87	status = "okay";
 88};
 89
 90&mpss {
 91	status = "okay";
 92};
 93
 94&mpss_mem {
 95	reg = <0x0 0x86800000 0x0 0x5500000>;
 96	status = "okay";
 97};
 98
 99&pm8916_usbin {
100	status = "okay";
101};
102
103&sdhc_1 {
104	status = "okay";
105};
106
107&usb {
108	extcon = <&pm8916_usbin>;
109	usb-role-switch;
110
111	status = "okay";
112};
113
114&usb_hs_phy {
115	extcon = <&pm8916_usbin>;
116};
117
118&venus {
119	status = "okay";
120};
121
122&venus_mem {
123	status = "okay";
124};
125
126&wcnss {
127	status = "okay";
128};
129
130&wcnss_iris {
131	compatible = "qcom,wcn3620";
132};
133
134&wcnss_mem {
135	status = "okay";
136};
137
138&tlmm {
139	/* pins are board-specific */
140	button_default: button-default-state {
141		function = "gpio";
142		drive-strength = <2>;
143	};
144
145	gpio_leds_default: gpio-leds-default-state {
146		function = "gpio";
147		drive-strength = <2>;
148		bias-disable;
149	};
150};