msm8916-samsung-j5-common.dtsi

  1// SPDX-License-Identifier: GPL-2.0-only
  2
  3#include "msm8916-pm8916.dtsi"
  4#include "msm8916-modem-qdsp6.dtsi"
  5
  6#include <dt-bindings/gpio/gpio.h>
  7#include <dt-bindings/input/input.h>
  8#include <dt-bindings/interrupt-controller/irq.h>
  9
 10/ {
 11	aliases {
 12		mmc0 = &sdhc_1; /* eMMC */
 13		mmc1 = &sdhc_2; /* SD card */
 14		serial0 = &blsp_uart2;
 15	};
 16
 17	chosen {
 18		stdout-path = "serial0";
 19	};
 20
 21	reserved-memory {
 22		/* Additional memory used by Samsung firmware modifications */
 23		tz-apps@85500000 {
 24			reg = <0x0 0x85500000 0x0 0xb00000>;
 25			no-map;
 26		};
 27	};
 28
 29	gpio_hall_sensor: gpio-hall-sensor {
 30		compatible = "gpio-keys";
 31
 32		pinctrl-names = "default";
 33		pinctrl-0 = <&gpio_hall_sensor_default>;
 34
 35		label = "GPIO Hall Effect Sensor";
 36
 37		event-hall-sensor {
 38			label = "Hall Effect Sensor";
 39			gpios = <&tlmm 52 GPIO_ACTIVE_LOW>;
 40			linux,input-type = <EV_SW>;
 41			linux,code = <SW_LID>;
 42			linux,can-disable;
 43		};
 44	};
 45
 46	gpio-keys {
 47		compatible = "gpio-keys";
 48
 49		pinctrl-names = "default";
 50		pinctrl-0 = <&gpio_keys_default>;
 51
 52		label = "GPIO Buttons";
 53
 54		button-volume-up {
 55			label = "Volume Up";
 56			gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
 57			linux,code = <KEY_VOLUMEUP>;
 58		};
 59
 60		button-home {
 61			label = "Home Key";
 62			gpios = <&tlmm 109 GPIO_ACTIVE_LOW>;
 63			linux,code = <KEY_HOMEPAGE>;
 64		};
 65	};
 66
 67	i2c_muic: i2c-muic {
 68		compatible = "i2c-gpio";
 69		sda-gpios = <&tlmm 105 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
 70		scl-gpios = <&tlmm 106 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
 71
 72		pinctrl-names = "default";
 73		pinctrl-0 = <&muic_i2c_default>;
 74
 75		#address-cells = <1>;
 76		#size-cells = <0>;
 77
 78		muic: extcon@25 {
 79			compatible = "siliconmitus,sm5703-muic";
 80			reg = <0x25>;
 81
 82			interrupt-parent = <&tlmm>;
 83			interrupts = <12 IRQ_TYPE_EDGE_FALLING>;
 84
 85			pinctrl-names = "default";
 86			pinctrl-0 = <&muic_int_default>;
 87		};
 88	};
 89
 90	i2c_sensors: i2c-sensors {
 91		compatible = "i2c-gpio";
 92
 93		sda-gpios = <&tlmm 31 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
 94		scl-gpios = <&tlmm 32 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
 95
 96		pinctrl-0 = <&sensors_i2c_default>;
 97		pinctrl-names = "default";
 98
 99		#address-cells = <1>;
100		#size-cells = <0>;
101
102		accelerometer: accelerometer@1d {
103			compatible = "st,lis2hh12";
104			reg = <0x1d>;
105
106			interrupts-extended = <&tlmm 115 IRQ_TYPE_LEVEL_HIGH>;
107
108			pinctrl-0 = <&accel_int_default>;
109			pinctrl-names = "default";
110
111			st,drdy-int-pin = <1>;
112		};
113	};
114};
115
116&blsp_i2c5 {
117	status = "okay";
118
119	touchscreen: touchscreen@50 {
120		compatible = "imagis,ist3038c";
121		reg = <0x50>;
122
123		interrupt-parent = <&tlmm>;
124		interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
125
126		touchscreen-size-x = <720>;
127		touchscreen-size-y = <1280>;
128
129		vddio-supply = <&pm8916_l6>;
130
131		pinctrl-0 = <&tsp_int_default>;
132		pinctrl-names = "default";
133	};
134};
135
136&blsp_uart2 {
137	status = "okay";
138	pinctrl-0 = <&blsp_uart2_console_default>;
139	pinctrl-1 = <&blsp_uart2_console_sleep>;
140	pinctrl-names = "default", "sleep";
141};
142
143&mpss_mem {
144	reg = <0x0 0x86800000 0x0 0x5800000>;
145};
146
147&pm8916_resin {
148	status = "okay";
149	linux,code = <KEY_VOLUMEDOWN>;
150};
151
152&sdhc_1 {
153	status = "okay";
154};
155
156&sdhc_2 {
157	status = "okay";
158
159	pinctrl-names = "default", "sleep";
160	pinctrl-0 = <&sdc2_default &sdc2_cd_default>;
161	pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>;
162
163	cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
164};
165
166&sound {
167	model = "msm8916-1mic";
168	audio-routing =
169		"AMIC1", "MIC BIAS External1",
170		"AMIC2", "MIC BIAS Internal2",
171		"AMIC3", "MIC BIAS External1";
172};
173
174&usb {
175	extcon = <&muic>, <&muic>;
176	status = "okay";
177};
178
179&usb_hs_phy {
180	extcon = <&muic>;
181};
182
183&venus {
184	status = "okay";
185};
186
187&venus_mem {
188	status = "okay";
189};
190
191&wcnss {
192	status = "okay";
193};
194
195&wcnss_iris {
196	compatible = "qcom,wcn3620";
197};
198
199&wcnss_mem {
200	status = "okay";
201};
202
203&tlmm {
204	accel_int_default: accel-int-default-state {
205		pins = "gpio115";
206		function = "gpio";
207		drive-strength = <2>;
208		bias-disable;
209	};
210
211	gpio_hall_sensor_default: gpio-hall-sensor-default-state {
212		pins = "gpio52";
213		function = "gpio";
214
215		drive-strength = <2>;
216		bias-disable;
217	};
218
219	gpio_keys_default: gpio-keys-default-state {
220		pins = "gpio107", "gpio109";
221		function = "gpio";
222
223		drive-strength = <2>;
224		bias-pull-up;
225	};
226
227	muic_i2c_default: muic-i2c-default-state {
228		pins = "gpio105", "gpio106";
229		function = "gpio";
230
231		drive-strength = <2>;
232		bias-disable;
233	};
234
235	muic_int_default: muic-int-default-state {
236		pins = "gpio12";
237		function = "gpio";
238
239		drive-strength = <2>;
240		bias-disable;
241	};
242
243	sdc2_cd_default: sdc2-cd-default-state {
244		pins = "gpio38";
245		function = "gpio";
246
247		drive-strength = <2>;
248		bias-disable;
249	};
250
251	sensors_i2c_default: sensors-i2c-default-state {
252		pins = "gpio31", "gpio32";
253		function = "gpio";
254		drive-strength = <2>;
255		bias-disable;
256	};
257
258	tsp_int_default: tsp-int-default-state {
259		pins = "gpio13";
260		function = "gpio";
261
262		drive-strength = <2>;
263		bias-disable;
264	};
265};