lemans-evk-camera.dtso

  1// SPDX-License-Identifier: BSD-3-Clause
  2/*
  3 * Copyright (c) 2024-2025 Qualcomm Innovation Center, Inc. All rights reserved.
  4 */
  5
  6/*
  7 * Camera Sensor overlay on top of leman evk core kit.
  8 */
  9
 10/dts-v1/;
 11/plugin/;
 12
 13#include <dt-bindings/clock/qcom,sa8775p-camcc.h>
 14#include <dt-bindings/gpio/gpio.h>
 15
 16&{/} {
 17	vreg_cam1_1p8: vreg_cam1_1p8 {
 18		compatible = "regulator-fixed";
 19		regulator-name = "vreg_cam1_1p8";
 20		startup-delay-us = <10000>;
 21		enable-active-high;
 22		gpio = <&pmm8654au_0_gpios 8 GPIO_ACTIVE_HIGH>;
 23	};
 24};
 25
 26&camcc {
 27	status = "okay";
 28};
 29
 30&camss {
 31	vdda-pll-supply = <&vreg_l1c>;
 32	vdda-phy-supply = <&vreg_l4a>;
 33
 34	status = "okay";
 35
 36	ports {
 37		#address-cells = <1>;
 38		#size-cells = <0>;
 39
 40		port@1 {
 41			reg = <1>;
 42
 43			csiphy1_ep: endpoint {
 44				clock-lanes = <7>;
 45				data-lanes = <0 1 2 3>;
 46				remote-endpoint = <&imx577_ep1>;
 47			};
 48		};
 49	};
 50};
 51
 52&cci1 {
 53	pinctrl-0 = <&cci1_0_default>;
 54	pinctrl-1 = <&cci1_0_sleep>;
 55
 56	status = "okay";
 57};
 58
 59&cci1_i2c0 {
 60	#address-cells = <1>;
 61	#size-cells = <0>;
 62
 63	camera@1a {
 64		compatible = "sony,imx577";
 65		reg = <0x1a>;
 66
 67		reset-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>;
 68		pinctrl-0 = <&cam1_default>;
 69		pinctrl-names = "default";
 70
 71		clocks = <&camcc CAM_CC_MCLK1_CLK>;
 72		assigned-clocks = <&camcc CAM_CC_MCLK1_CLK>;
 73		assigned-clock-rates = <24000000>;
 74
 75		dovdd-supply = <&vreg_s4a>;
 76		avdd-supply = <&vreg_cam1_1p8>;
 77
 78		port {
 79			imx577_ep1: endpoint {
 80				clock-lanes = <7>;
 81				link-frequencies = /bits/ 64 <600000000>;
 82				data-lanes = <0 1 2 3>;
 83				remote-endpoint = <&csiphy1_ep>;
 84			};
 85		};
 86	};
 87};
 88
 89&tlmm {
 90	cam1_default: cam1-default-state {
 91		mclk-pins {
 92			pins = "gpio73";
 93			function = "cam_mclk";
 94			drive-strength = <2>;
 95			bias-disable;
 96		};
 97
 98		rst-pins {
 99			pins = "gpio133";
100			function = "gpio";
101			drive-strength = <2>;
102			bias-disable;
103		};
104	};
105};