FILE
ipq8074.dtsi
File preview with syntax highlighting.
linux-6.19.14/arch/arm64/boot/dts/qcom/ipq8074.dtsi
1// SPDX-License-Identifier: GPL-2.0-only 2/* 3 * Copyright (c) 2017, The Linux Foundation. All rights reserved. 4 */ 5 6#include <dt-bindings/interrupt-controller/arm-gic.h> 7#include <dt-bindings/clock/qcom,gcc-ipq8074.h> 8 9/ { 10 #address-cells = <2>; 11 #size-cells = <2>; 12 13 model = "Qualcomm Technologies, Inc. IPQ8074"; 14 compatible = "qcom,ipq8074"; 15 interrupt-parent = <&intc>; 16 17 clocks { 18 sleep_clk: sleep_clk { 19 compatible = "fixed-clock"; 20 clock-frequency = <32768>; 21 #clock-cells = <0>; 22 }; 23 24 xo: xo { 25 compatible = "fixed-clock"; 26 clock-frequency = <19200000>; 27 #clock-cells = <0>; 28 }; 29 }; 30 31 cpus { 32 #address-cells = <1>; 33 #size-cells = <0>; 34 35 cpu0: cpu@0 { 36 device_type = "cpu"; 37 compatible = "arm,cortex-a53"; 38 reg = <0x0>; 39 next-level-cache = <&l2_0>; 40 enable-method = "psci"; 41 }; 42 43 cpu1: cpu@1 { 44 device_type = "cpu"; 45 compatible = "arm,cortex-a53"; 46 enable-method = "psci"; 47 reg = <0x1>; 48 next-level-cache = <&l2_0>; 49 }; 50 51 cpu2: cpu@2 { 52 device_type = "cpu"; 53 compatible = "arm,cortex-a53"; 54 enable-method = "psci"; 55 reg = <0x2>; 56 next-level-cache = <&l2_0>; 57 }; 58 59 cpu3: cpu@3 { 60 device_type = "cpu"; 61 compatible = "arm,cortex-a53"; 62 enable-method = "psci"; 63 reg = <0x3>; 64 next-level-cache = <&l2_0>; 65 }; 66 67 l2_0: l2-cache { 68 compatible = "cache"; 69 cache-level = <2>; 70 cache-unified; 71 }; 72 }; 73 74 pmu { 75 compatible = "arm,cortex-a53-pmu"; 76 interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; 77 }; 78 79 psci { 80 compatible = "arm,psci-1.0"; 81 method = "smc"; 82 }; 83 84 reserved-memory { 85 #address-cells = <2>; 86 #size-cells = <2>; 87 ranges; 88 89 bootloader@4a600000 { 90 reg = <0x0 0x4a600000 0x0 0x400000>; 91 no-map; 92 }; 93 94 sbl@4aa00000 { 95 reg = <0x0 0x4aa00000 0x0 0x100000>; 96 no-map; 97 }; 98 99 smem@4ab00000 { 100 compatible = "qcom,smem"; 101 reg = <0x0 0x4ab00000 0x0 0x100000>; 102 no-map; 103 104 hwlocks = <&tcsr_mutex 3>; 105 }; 106 107 memory@4ac00000 { 108 reg = <0x0 0x4ac00000 0x0 0x400000>; 109 no-map; 110 }; 111 }; 112 113 firmware { 114 scm { 115 compatible = "qcom,scm-ipq8074", "qcom,scm"; 116 qcom,dload-mode = <&tcsr 0x6100>; 117 }; 118 }; 119 120 soc: soc@0 { 121 #address-cells = <1>; 122 #size-cells = <1>; 123 ranges = <0 0 0 0xffffffff>; 124 compatible = "simple-bus"; 125 126 ssphy_1: phy@58000 { 127 compatible = "qcom,ipq8074-qmp-usb3-phy"; 128 reg = <0x00058000 0x1000>; 129 130 clocks = <&gcc GCC_USB1_AUX_CLK>, 131 <&xo>, 132 <&gcc GCC_USB1_PHY_CFG_AHB_CLK>, 133 <&gcc GCC_USB1_PIPE_CLK>; 134 clock-names = "aux", 135 "ref", 136 "cfg_ahb", 137 "pipe"; 138 clock-output-names = "usb3phy_1_cc_pipe_clk"; 139 #clock-cells = <0>; 140 #phy-cells = <0>; 141 142 resets = <&gcc GCC_USB1_PHY_BCR>, 143 <&gcc GCC_USB3PHY_1_PHY_BCR>; 144 reset-names = "phy", 145 "phy_phy"; 146 147 status = "disabled"; 148 }; 149 150 qusb_phy_1: phy@59000 { 151 compatible = "qcom,ipq8074-qusb2-phy"; 152 reg = <0x00059000 0x180>; 153 #phy-cells = <0>; 154 155 clocks = <&gcc GCC_USB1_PHY_CFG_AHB_CLK>, 156 <&xo>; 157 clock-names = "cfg_ahb", "ref"; 158 159 resets = <&gcc GCC_QUSB2_1_PHY_BCR>; 160 status = "disabled"; 161 }; 162 163 ssphy_0: phy@78000 { 164 compatible = "qcom,ipq8074-qmp-usb3-phy"; 165 reg = <0x00078000 0x1000>; 166 167 clocks = <&gcc GCC_USB0_AUX_CLK>, 168 <&xo>, 169 <&gcc GCC_USB0_PHY_CFG_AHB_CLK>, 170 <&gcc GCC_USB0_PIPE_CLK>; 171 clock-names = "aux", 172 "ref", 173 "cfg_ahb", 174 "pipe"; 175 clock-output-names = "usb3phy_0_cc_pipe_clk"; 176 #clock-cells = <0>; 177 #phy-cells = <0>; 178 179 resets = <&gcc GCC_USB0_PHY_BCR>, 180 <&gcc GCC_USB3PHY_0_PHY_BCR>; 181 reset-names = "phy", 182 "phy_phy"; 183 184 status = "disabled"; 185 }; 186 187 qusb_phy_0: phy@79000 { 188 compatible = "qcom,ipq8074-qusb2-phy"; 189 reg = <0x00079000 0x180>; 190 #phy-cells = <0>; 191 192 clocks = <&gcc GCC_USB0_PHY_CFG_AHB_CLK>, 193 <&xo>; 194 clock-names = "cfg_ahb", "ref"; 195 196 resets = <&gcc GCC_QUSB2_0_PHY_BCR>; 197 status = "disabled"; 198 }; 199 200 pcie_qmp0: phy@84000 { 201 compatible = "qcom,ipq8074-qmp-gen3-pcie-phy"; 202 reg = <0x00084000 0x1000>; 203 204 clocks = <&gcc GCC_PCIE0_AUX_CLK>, 205 <&gcc GCC_PCIE0_AHB_CLK>, 206 <&gcc GCC_PCIE0_PIPE_CLK>; 207 clock-names = "aux", 208 "cfg_ahb", 209 "pipe"; 210 211 clock-output-names = "pcie20_phy0_pipe_clk"; 212 #clock-cells = <0>; 213 214 #phy-cells = <0>; 215 216 resets = <&gcc GCC_PCIE0_PHY_BCR>, 217 <&gcc GCC_PCIE0PHY_PHY_BCR>; 218 reset-names = "phy", 219 "common"; 220 status = "disabled"; 221 }; 222 223 pcie_qmp1: phy@8e000 { 224 compatible = "qcom,ipq8074-qmp-pcie-phy"; 225 reg = <0x0008e000 0x1000>; 226 227 clocks = <&gcc GCC_PCIE1_AUX_CLK>, 228 <&gcc GCC_PCIE1_AHB_CLK>, 229 <&gcc GCC_PCIE1_PIPE_CLK>; 230 clock-names = "aux", 231 "cfg_ahb", 232 "pipe"; 233 234 clock-output-names = "pcie20_phy1_pipe_clk"; 235 #clock-cells = <0>; 236 237 #phy-cells = <0>; 238 239 resets = <&gcc GCC_PCIE1_PHY_BCR>, 240 <&gcc GCC_PCIE1PHY_PHY_BCR>; 241 reset-names = "phy", 242 "common"; 243 status = "disabled"; 244 }; 245 246 mdio: mdio@90000 { 247 compatible = "qcom,ipq8074-mdio", "qcom,ipq4019-mdio"; 248 reg = <0x00090000 0x64>; 249 #address-cells = <1>; 250 #size-cells = <0>; 251 252 clocks = <&gcc GCC_MDIO_AHB_CLK>; 253 clock-names = "gcc_mdio_ahb_clk"; 254 255 clock-frequency = <6250000>; 256 257 status = "disabled"; 258 }; 259 260 qfprom: efuse@a4000 { 261 compatible = "qcom,ipq8074-qfprom", "qcom,qfprom"; 262 reg = <0x000a4000 0x2000>; 263 #address-cells = <1>; 264 #size-cells = <1>; 265 }; 266 267 prng: rng@e3000 { 268 compatible = "qcom,prng-ee"; 269 reg = <0x000e3000 0x1000>; 270 clocks = <&gcc GCC_PRNG_AHB_CLK>; 271 clock-names = "core"; 272 status = "disabled"; 273 }; 274 275 tsens: thermal-sensor@4a9000 { 276 compatible = "qcom,ipq8074-tsens"; 277 reg = <0x4a9000 0x1000>, /* TM */ 278 <0x4a8000 0x1000>; /* SROT */ 279 interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; 280 interrupt-names = "combined"; 281 #qcom,sensors = <16>; 282 #thermal-sensor-cells = <1>; 283 }; 284 285 cryptobam: dma-controller@704000 { 286 compatible = "qcom,bam-v1.7.0"; 287 reg = <0x00704000 0x20000>; 288 interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>; 289 clocks = <&gcc GCC_CRYPTO_AHB_CLK>; 290 clock-names = "bam_clk"; 291 #dma-cells = <1>; 292 qcom,ee = <1>; 293 qcom,controlled-remotely; 294 status = "disabled"; 295 }; 296 297 crypto: crypto@73a000 { 298 compatible = "qcom,crypto-v5.1"; 299 reg = <0x0073a000 0x6000>; 300 clocks = <&gcc GCC_CRYPTO_AHB_CLK>, 301 <&gcc GCC_CRYPTO_AXI_CLK>, 302 <&gcc GCC_CRYPTO_CLK>; 303 clock-names = "iface", "bus", "core"; 304 dmas = <&cryptobam 2>, <&cryptobam 3>; 305 dma-names = "rx", "tx"; 306 status = "disabled"; 307 }; 308 309 tlmm: pinctrl@1000000 { 310 compatible = "qcom,ipq8074-pinctrl"; 311 reg = <0x01000000 0x300000>; 312 interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; 313 gpio-controller; 314 gpio-ranges = <&tlmm 0 0 70>; 315 #gpio-cells = <2>; 316 interrupt-controller; 317 #interrupt-cells = <2>; 318 319 serial_4_pins: serial4-state { 320 pins = "gpio23", "gpio24"; 321 function = "blsp4_uart1"; 322 drive-strength = <8>; 323 bias-disable; 324 }; 325 326 serial_5_pins: serial5-state { 327 pins = "gpio9", "gpio16"; 328 function = "blsp5_uart"; 329 drive-strength = <8>; 330 bias-disable; 331 }; 332 333 i2c_0_pins: i2c-0-state { 334 pins = "gpio42", "gpio43"; 335 function = "blsp1_i2c"; 336 drive-strength = <8>; 337 bias-disable; 338 }; 339 340 spi_0_pins: spi-0-state { 341 pins = "gpio38", "gpio39", "gpio40", "gpio41"; 342 function = "blsp0_spi"; 343 drive-strength = <8>; 344 bias-disable; 345 }; 346 347 hsuart_pins: hsuart-state { 348 pins = "gpio46", "gpio47", "gpio48", "gpio49"; 349 function = "blsp2_uart"; 350 drive-strength = <8>; 351 bias-disable; 352 }; 353 354 qpic_pins: qpic-state { 355 pins = "gpio1", "gpio3", "gpio4", 356 "gpio5", "gpio6", "gpio7", 357 "gpio8", "gpio10", "gpio11", 358 "gpio12", "gpio13", "gpio14", 359 "gpio15", "gpio17"; 360 function = "qpic"; 361 drive-strength = <8>; 362 bias-disable; 363 }; 364 }; 365 366 gcc: clock-controller@1800000 { 367 compatible = "qcom,gcc-ipq8074"; 368 reg = <0x01800000 0x80000>; 369 clocks = <&xo>, 370 <&sleep_clk>, 371 <&pcie_qmp0>, 372 <&pcie_qmp1>; 373 clock-names = "xo", 374 "sleep_clk", 375 "pcie0_pipe", 376 "pcie1_pipe"; 377 #clock-cells = <1>; 378 #power-domain-cells = <1>; 379 #reset-cells = <1>; 380 }; 381 382 tcsr_mutex: hwlock@1905000 { 383 compatible = "qcom,tcsr-mutex"; 384 reg = <0x01905000 0x20000>; 385 #hwlock-cells = <1>; 386 }; 387 388 tcsr: syscon@1937000 { 389 compatible = "qcom,tcsr-ipq8074", "syscon"; 390 reg = <0x01937000 0x21000>; 391 }; 392 393 spmi_bus: spmi@200f000 { 394 compatible = "qcom,spmi-pmic-arb"; 395 reg = <0x0200f000 0x001000>, 396 <0x02400000 0x800000>, 397 <0x02c00000 0x800000>, 398 <0x03800000 0x200000>, 399 <0x0200a000 0x000700>; 400 reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; 401 interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; 402 interrupt-names = "periph_irq"; 403 qcom,ee = <0>; 404 qcom,channel = <0>; 405 #address-cells = <2>; 406 #size-cells = <0>; 407 interrupt-controller; 408 #interrupt-cells = <4>; 409 }; 410 411 sdhc_1: mmc@7824900 { 412 compatible = "qcom,ipq8074-sdhci", "qcom,sdhci-msm-v4"; 413 reg = <0x7824900 0x500>, <0x7824000 0x800>; 414 reg-names = "hc", "core"; 415 416 interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, 417 <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; 418 interrupt-names = "hc_irq", "pwr_irq"; 419 420 clocks = <&gcc GCC_SDCC1_AHB_CLK>, 421 <&gcc GCC_SDCC1_APPS_CLK>, 422 <&xo>; 423 clock-names = "iface", "core", "xo"; 424 resets = <&gcc GCC_SDCC1_BCR>; 425 max-frequency = <384000000>; 426 mmc-ddr-1_8v; 427 mmc-hs200-1_8v; 428 mmc-hs400-1_8v; 429 bus-width = <8>; 430 431 status = "disabled"; 432 }; 433 434 blsp_dma: dma-controller@7884000 { 435 compatible = "qcom,bam-v1.7.0"; 436 reg = <0x07884000 0x2b000>; 437 interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>; 438 clocks = <&gcc GCC_BLSP1_AHB_CLK>; 439 clock-names = "bam_clk"; 440 #dma-cells = <1>; 441 qcom,ee = <0>; 442 }; 443 444 blsp1_uart1: serial@78af000 { 445 compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; 446 reg = <0x078af000 0x200>; 447 interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; 448 clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, 449 <&gcc GCC_BLSP1_AHB_CLK>; 450 clock-names = "core", "iface"; 451 status = "disabled"; 452 }; 453 454 blsp1_uart3: serial@78b1000 { 455 compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; 456 reg = <0x078b1000 0x200>; 457 interrupts = <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>; 458 clocks = <&gcc GCC_BLSP1_UART3_APPS_CLK>, 459 <&gcc GCC_BLSP1_AHB_CLK>; 460 clock-names = "core", "iface"; 461 dmas = <&blsp_dma 4>, 462 <&blsp_dma 5>; 463 dma-names = "tx", "rx"; 464 pinctrl-0 = <&hsuart_pins>; 465 pinctrl-names = "default"; 466 status = "disabled"; 467 }; 468 469 blsp1_uart5: serial@78b3000 { 470 compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; 471 reg = <0x078b3000 0x200>; 472 interrupts = <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>; 473 clocks = <&gcc GCC_BLSP1_UART5_APPS_CLK>, 474 <&gcc GCC_BLSP1_AHB_CLK>; 475 clock-names = "core", "iface"; 476 pinctrl-0 = <&serial_4_pins>; 477 pinctrl-names = "default"; 478 status = "disabled"; 479 }; 480 481 blsp1_uart6: serial@78b4000 { 482 compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; 483 reg = <0x078b4000 0x200>; 484 interrupts = <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>; 485 clocks = <&gcc GCC_BLSP1_UART6_APPS_CLK>, 486 <&gcc GCC_BLSP1_AHB_CLK>; 487 clock-names = "core", "iface"; 488 pinctrl-0 = <&serial_5_pins>; 489 pinctrl-names = "default"; 490 status = "disabled"; 491 }; 492 493 blsp1_spi1: spi@78b5000 { 494 compatible = "qcom,spi-qup-v2.2.1"; 495 #address-cells = <1>; 496 #size-cells = <0>; 497 reg = <0x078b5000 0x600>; 498 interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; 499 clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>, 500 <&gcc GCC_BLSP1_AHB_CLK>; 501 clock-names = "core", "iface"; 502 dmas = <&blsp_dma 12>, <&blsp_dma 13>; 503 dma-names = "tx", "rx"; 504 pinctrl-0 = <&spi_0_pins>; 505 pinctrl-names = "default"; 506 status = "disabled"; 507 }; 508 509 blsp1_i2c2: i2c@78b6000 { 510 compatible = "qcom,i2c-qup-v2.2.1"; 511 #address-cells = <1>; 512 #size-cells = <0>; 513 reg = <0x078b6000 0x600>; 514 interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; 515 clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, 516 <&gcc GCC_BLSP1_AHB_CLK>; 517 clock-names = "core", "iface"; 518 clock-frequency = <400000>; 519 dmas = <&blsp_dma 14>, <&blsp_dma 15>; 520 dma-names = "tx", "rx"; 521 pinctrl-0 = <&i2c_0_pins>; 522 pinctrl-names = "default"; 523 status = "disabled"; 524 }; 525 526 blsp1_i2c3: i2c@78b7000 { 527 compatible = "qcom,i2c-qup-v2.2.1"; 528 #address-cells = <1>; 529 #size-cells = <0>; 530 reg = <0x078b7000 0x600>; 531 interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; 532 clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>, 533 <&gcc GCC_BLSP1_AHB_CLK>; 534 clock-names = "core", "iface"; 535 clock-frequency = <100000>; 536 dmas = <&blsp_dma 16>, <&blsp_dma 17>; 537 dma-names = "tx", "rx"; 538 status = "disabled"; 539 }; 540 541 blsp1_spi4: spi@78b8000 { 542 compatible = "qcom,spi-qup-v2.2.1"; 543 #address-cells = <1>; 544 #size-cells = <0>; 545 reg = <0x78b8000 0x600>; 546 interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; 547 clocks = <&gcc GCC_BLSP1_QUP4_SPI_APPS_CLK>, 548 <&gcc GCC_BLSP1_AHB_CLK>; 549 clock-names = "core", "iface"; 550 dmas = <&blsp_dma 18>, <&blsp_dma 19>; 551 dma-names = "tx", "rx"; 552 status = "disabled"; 553 }; 554 555 blsp1_i2c5: i2c@78b9000 { 556 compatible = "qcom,i2c-qup-v2.2.1"; 557 #address-cells = <1>; 558 #size-cells = <0>; 559 reg = <0x78b9000 0x600>; 560 interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>; 561 clocks = <&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>, 562 <&gcc GCC_BLSP1_AHB_CLK>; 563 clock-names = "core", "iface"; 564 clock-frequency = <400000>; 565 dmas = <&blsp_dma 20>, <&blsp_dma 21>; 566 dma-names = "tx", "rx"; 567 status = "disabled"; 568 }; 569 570 blsp1_spi5: spi@78b9000 { 571 compatible = "qcom,spi-qup-v2.2.1"; 572 #address-cells = <1>; 573 #size-cells = <0>; 574 reg = <0x78b9000 0x600>; 575 interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>; 576 clocks = <&gcc GCC_BLSP1_QUP5_SPI_APPS_CLK>, 577 <&gcc GCC_BLSP1_AHB_CLK>; 578 clock-names = "core", "iface"; 579 dmas = <&blsp_dma 20>, <&blsp_dma 21>; 580 dma-names = "tx", "rx"; 581 status = "disabled"; 582 }; 583 584 blsp1_i2c6: i2c@78ba000 { 585 compatible = "qcom,i2c-qup-v2.2.1"; 586 #address-cells = <1>; 587 #size-cells = <0>; 588 reg = <0x078ba000 0x600>; 589 interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>; 590 clocks = <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>, 591 <&gcc GCC_BLSP1_AHB_CLK>; 592 clock-names = "core", "iface"; 593 clock-frequency = <100000>; 594 dmas = <&blsp_dma 22>, <&blsp_dma 23>; 595 dma-names = "tx", "rx"; 596 status = "disabled"; 597 }; 598 599 qpic_bam: dma-controller@7984000 { 600 compatible = "qcom,bam-v1.7.0"; 601 reg = <0x07984000 0x1a000>; 602 interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>; 603 clocks = <&gcc GCC_QPIC_AHB_CLK>; 604 clock-names = "bam_clk"; 605 #dma-cells = <1>; 606 qcom,ee = <0>; 607 status = "disabled"; 608 }; 609 610 qpic_nand: nand-controller@79b0000 { 611 compatible = "qcom,ipq8074-nand"; 612 reg = <0x079b0000 0x10000>; 613 #address-cells = <1>; 614 #size-cells = <0>; 615 clocks = <&gcc GCC_QPIC_CLK>, 616 <&gcc GCC_QPIC_AHB_CLK>; 617 clock-names = "core", "aon"; 618 619 dmas = <&qpic_bam 0>, 620 <&qpic_bam 1>, 621 <&qpic_bam 2>; 622 dma-names = "tx", "rx", "cmd"; 623 pinctrl-0 = <&qpic_pins>; 624 pinctrl-names = "default"; 625 status = "disabled"; 626 }; 627 628 usb_0: usb@8af8800 { 629 compatible = "qcom,ipq8074-dwc3", "qcom,dwc3"; 630 reg = <0x08af8800 0x400>; 631 #address-cells = <1>; 632 #size-cells = <1>; 633 ranges; 634 635 clocks = <&gcc GCC_SYS_NOC_USB0_AXI_CLK>, 636 <&gcc GCC_USB0_MASTER_CLK>, 637 <&gcc GCC_USB0_SLEEP_CLK>, 638 <&gcc GCC_USB0_MOCK_UTMI_CLK>; 639 clock-names = "cfg_noc", 640 "core", 641 "sleep", 642 "mock_utmi"; 643 644 assigned-clocks = <&gcc GCC_SYS_NOC_USB0_AXI_CLK>, 645 <&gcc GCC_USB0_MASTER_CLK>, 646 <&gcc GCC_USB0_MOCK_UTMI_CLK>; 647 assigned-clock-rates = <133330000>, 648 <133330000>, 649 <19200000>; 650 651 interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>, 652 <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, 653 <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>; 654 interrupt-names = "pwr_event", 655 "qusb2_phy", 656 "ss_phy_irq"; 657 658 power-domains = <&gcc USB0_GDSC>; 659 660 resets = <&gcc GCC_USB0_BCR>; 661 status = "disabled"; 662 663 dwc_0: usb@8a00000 { 664 compatible = "snps,dwc3"; 665 reg = <0x8a00000 0xcd00>; 666 interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; 667 phys = <&qusb_phy_0>, <&ssphy_0>; 668 phy-names = "usb2-phy", "usb3-phy"; 669 snps,parkmode-disable-ss-quirk; 670 snps,is-utmi-l1-suspend; 671 snps,hird-threshold = /bits/ 8 <0x0>; 672 snps,dis_u2_susphy_quirk; 673 snps,dis_u3_susphy_quirk; 674 dr_mode = "host"; 675 }; 676 }; 677 678 usb_1: usb@8cf8800 { 679 compatible = "qcom,ipq8074-dwc3", "qcom,dwc3"; 680 reg = <0x08cf8800 0x400>; 681 #address-cells = <1>; 682 #size-cells = <1>; 683 ranges; 684 685 clocks = <&gcc GCC_SYS_NOC_USB1_AXI_CLK>, 686 <&gcc GCC_USB1_MASTER_CLK>, 687 <&gcc GCC_USB1_SLEEP_CLK>, 688 <&gcc GCC_USB1_MOCK_UTMI_CLK>; 689 clock-names = "cfg_noc", 690 "core", 691 "sleep", 692 "mock_utmi"; 693 694 assigned-clocks = <&gcc GCC_SYS_NOC_USB1_AXI_CLK>, 695 <&gcc GCC_USB1_MASTER_CLK>, 696 <&gcc GCC_USB1_MOCK_UTMI_CLK>; 697 assigned-clock-rates = <133330000>, 698 <133330000>, 699 <19200000>; 700 701 interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, 702 <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, 703 <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>; 704 interrupt-names = "pwr_event", 705 "qusb2_phy", 706 "ss_phy_irq"; 707 708 power-domains = <&gcc USB1_GDSC>; 709 710 resets = <&gcc GCC_USB1_BCR>; 711 status = "disabled"; 712 713 dwc_1: usb@8c00000 { 714 compatible = "snps,dwc3"; 715 reg = <0x8c00000 0xcd00>; 716 interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; 717 phys = <&qusb_phy_1>, <&ssphy_1>; 718 phy-names = "usb2-phy", "usb3-phy"; 719 snps,parkmode-disable-ss-quirk; 720 snps,is-utmi-l1-suspend; 721 snps,hird-threshold = /bits/ 8 <0x0>; 722 snps,dis_u2_susphy_quirk; 723 snps,dis_u3_susphy_quirk; 724 dr_mode = "host"; 725 }; 726 }; 727 728 intc: interrupt-controller@b000000 { 729 compatible = "qcom,msm-qgic2"; 730 #address-cells = <1>; 731 #size-cells = <1>; 732 interrupt-controller; 733 #interrupt-cells = <3>; 734 reg = <0x0b000000 0x1000>, <0x0b002000 0x1000>; 735 ranges = <0 0xb00a000 0xffd>; 736 737 v2m@0 { 738 compatible = "arm,gic-v2m-frame"; 739 msi-controller; 740 reg = <0x0 0xffd>; 741 }; 742 }; 743 744 watchdog: watchdog@b017000 { 745 compatible = "qcom,kpss-wdt"; 746 reg = <0xb017000 0x1000>; 747 interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>; 748 clocks = <&sleep_clk>; 749 timeout-sec = <30>; 750 }; 751 752 apcs_glb: mailbox@b111000 { 753 compatible = "qcom,ipq8074-apcs-apps-global", 754 "qcom,ipq6018-apcs-apps-global"; 755 reg = <0x0b111000 0x1000>; 756 clocks = <&a53pll>, <&xo>, <&gcc GPLL0>; 757 clock-names = "pll", "xo", "gpll0"; 758 759 #clock-cells = <1>; 760 #mbox-cells = <1>; 761 }; 762 763 a53pll: clock@b116000 { 764 compatible = "qcom,ipq8074-a53pll"; 765 reg = <0x0b116000 0x40>; 766 #clock-cells = <0>; 767 clocks = <&xo>; 768 clock-names = "xo"; 769 }; 770 771 timer@b120000 { 772 #address-cells = <1>; 773 #size-cells = <1>; 774 ranges; 775 compatible = "arm,armv7-timer-mem"; 776 reg = <0x0b120000 0x1000>; 777 778 frame@b120000 { 779 frame-number = <0>; 780 interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, 781 <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; 782 reg = <0x0b121000 0x1000>, 783 <0x0b122000 0x1000>; 784 }; 785 786 frame@b123000 { 787 frame-number = <1>; 788 interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; 789 reg = <0x0b123000 0x1000>; 790 status = "disabled"; 791 }; 792 793 frame@b124000 { 794 frame-number = <2>; 795 interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; 796 reg = <0x0b124000 0x1000>; 797 status = "disabled"; 798 }; 799 800 frame@b125000 { 801 frame-number = <3>; 802 interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; 803 reg = <0x0b125000 0x1000>; 804 status = "disabled"; 805 }; 806 807 frame@b126000 { 808 frame-number = <4>; 809 interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; 810 reg = <0x0b126000 0x1000>; 811 status = "disabled"; 812 }; 813 814 frame@b127000 { 815 frame-number = <5>; 816 interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; 817 reg = <0x0b127000 0x1000>; 818 status = "disabled"; 819 }; 820 821 frame@b128000 { 822 frame-number = <6>; 823 interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; 824 reg = <0x0b128000 0x1000>; 825 status = "disabled"; 826 }; 827 }; 828 829 pcie1: pcie@10000000 { 830 compatible = "qcom,pcie-ipq8074"; 831 reg = <0x10000000 0xf1d>, 832 <0x10000f20 0xa8>, 833 <0x00088000 0x2000>, 834 <0x10100000 0x1000>; 835 reg-names = "dbi", "elbi", "parf", "config"; 836 device_type = "pci"; 837 linux,pci-domain = <1>; 838 bus-range = <0x00 0xff>; 839 num-lanes = <1>; 840 max-link-speed = <2>; 841 #address-cells = <3>; 842 #size-cells = <2>; 843 844 phys = <&pcie_qmp1>; 845 phy-names = "pciephy"; 846 847 ranges = <0x81000000 0x0 0x00000000 0x10200000 0x0 0x10000>, /* I/O */ 848 <0x82000000 0x0 0x10220000 0x10220000 0x0 0xfde0000>; /* MEM */ 849 850 interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>, 851 <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>, 852 <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>, 853 <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, 854 <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>, 855 <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>, 856 <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>, 857 <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>, 858 <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; 859 interrupt-names = "msi0", 860 "msi1", 861 "msi2", 862 "msi3", 863 "msi4", 864 "msi5", 865 "msi6", 866 "msi7", 867 "global"; 868 #interrupt-cells = <1>; 869 interrupt-map-mask = <0 0 0 0x7>; 870 interrupt-map = <0 0 0 1 &intc 0 GIC_SPI 142 871 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ 872 <0 0 0 2 &intc 0 GIC_SPI 143 873 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ 874 <0 0 0 3 &intc 0 GIC_SPI 144 875 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ 876 <0 0 0 4 &intc 0 GIC_SPI 145 877 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ 878 879 clocks = <&gcc GCC_SYS_NOC_PCIE1_AXI_CLK>, 880 <&gcc GCC_PCIE1_AXI_M_CLK>, 881 <&gcc GCC_PCIE1_AXI_S_CLK>, 882 <&gcc GCC_PCIE1_AHB_CLK>, 883 <&gcc GCC_PCIE1_AUX_CLK>; 884 clock-names = "iface", 885 "axi_m", 886 "axi_s", 887 "ahb", 888 "aux"; 889 resets = <&gcc GCC_PCIE1_PIPE_ARES>, 890 <&gcc GCC_PCIE1_SLEEP_ARES>, 891 <&gcc GCC_PCIE1_CORE_STICKY_ARES>, 892 <&gcc GCC_PCIE1_AXI_MASTER_ARES>, 893 <&gcc GCC_PCIE1_AXI_SLAVE_ARES>, 894 <&gcc GCC_PCIE1_AHB_ARES>, 895 <&gcc GCC_PCIE1_AXI_MASTER_STICKY_ARES>; 896 reset-names = "pipe", 897 "sleep", 898 "sticky", 899 "axi_m", 900 "axi_s", 901 "ahb", 902 "axi_m_sticky"; 903 status = "disabled"; 904 905 pcie@0 { 906 device_type = "pci"; 907 reg = <0x0 0x0 0x0 0x0 0x0>; 908 bus-range = <0x01 0xff>; 909 910 #address-cells = <3>; 911 #size-cells = <2>; 912 ranges; 913 }; 914 }; 915 916 pcie0: pcie@20000000 { 917 compatible = "qcom,pcie-ipq8074-gen3"; 918 reg = <0x20000000 0xf1d>, 919 <0x20000f20 0xa8>, 920 <0x20001000 0x1000>, 921 <0x00080000 0x4000>, 922 <0x20100000 0x1000>; 923 reg-names = "dbi", "elbi", "atu", "parf", "config"; 924 device_type = "pci"; 925 linux,pci-domain = <0>; 926 bus-range = <0x00 0xff>; 927 num-lanes = <1>; 928 max-link-speed = <3>; 929 #address-cells = <3>; 930 #size-cells = <2>; 931 932 phys = <&pcie_qmp0>; 933 phy-names = "pciephy"; 934 935 ranges = <0x81000000 0x0 0x00000000 0x20200000 0x0 0x10000>, /* I/O */ 936 <0x82000000 0x0 0x20220000 0x20220000 0x0 0xfde0000>; /* MEM */ 937 938 interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>, 939 <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>, 940 <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>, 941 <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>, 942 <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>, 943 <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>, 944 <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, 945 <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, 946 <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; 947 interrupt-names = "msi0", 948 "msi1", 949 "msi2", 950 "msi3", 951 "msi4", 952 "msi5", 953 "msi6", 954 "msi7", 955 "global"; 956 #interrupt-cells = <1>; 957 interrupt-map-mask = <0 0 0 0x7>; 958 interrupt-map = <0 0 0 1 &intc 0 GIC_SPI 75 959 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ 960 <0 0 0 2 &intc 0 GIC_SPI 78 961 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ 962 <0 0 0 3 &intc 0 GIC_SPI 79 963 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ 964 <0 0 0 4 &intc 0 GIC_SPI 83 965 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ 966 967 clocks = <&gcc GCC_SYS_NOC_PCIE0_AXI_CLK>, 968 <&gcc GCC_PCIE0_AXI_M_CLK>, 969 <&gcc GCC_PCIE0_AXI_S_CLK>, 970 <&gcc GCC_PCIE0_AXI_S_BRIDGE_CLK>, 971 <&gcc GCC_PCIE0_RCHNG_CLK>; 972 clock-names = "iface", 973 "axi_m", 974 "axi_s", 975 "axi_bridge", 976 "rchng"; 977 978 resets = <&gcc GCC_PCIE0_PIPE_ARES>, 979 <&gcc GCC_PCIE0_SLEEP_ARES>, 980 <&gcc GCC_PCIE0_CORE_STICKY_ARES>, 981 <&gcc GCC_PCIE0_AXI_MASTER_ARES>, 982 <&gcc GCC_PCIE0_AXI_SLAVE_ARES>, 983 <&gcc GCC_PCIE0_AHB_ARES>, 984 <&gcc GCC_PCIE0_AXI_MASTER_STICKY_ARES>, 985 <&gcc GCC_PCIE0_AXI_SLAVE_STICKY_ARES>; 986 reset-names = "pipe", 987 "sleep", 988 "sticky", 989 "axi_m", 990 "axi_s", 991 "ahb", 992 "axi_m_sticky", 993 "axi_s_sticky"; 994 status = "disabled"; 995 996 pcie@0 { 997 device_type = "pci"; 998 reg = <0x0 0x0 0x0 0x0 0x0>; 999 bus-range = <0x01 0xff>; 1000 1001 #address-cells = <3>; 1002 #size-cells = <2>; 1003 ranges; 1004 }; 1005 }; 1006 }; 1007 1008 timer { 1009 compatible = "arm,armv8-timer"; 1010 interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, 1011 <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, 1012 <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, 1013 <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; 1014 }; 1015 1016 thermal-zones { 1017 nss-top-thermal { 1018 polling-delay-passive = <250>; 1019 1020 thermal-sensors = <&tsens 4>; 1021 1022 trips { 1023 nss-top-crit { 1024 temperature = <110000>; 1025 hysteresis = <1000>; 1026 type = "critical"; 1027 }; 1028 }; 1029 }; 1030 1031 nss0-thermal { 1032 polling-delay-passive = <250>; 1033 1034 thermal-sensors = <&tsens 5>; 1035 1036 trips { 1037 nss-0-crit { 1038 temperature = <110000>; 1039 hysteresis = <1000>; 1040 type = "critical"; 1041 }; 1042 }; 1043 }; 1044 1045 nss1-thermal { 1046 polling-delay-passive = <250>; 1047 1048 thermal-sensors = <&tsens 6>; 1049 1050 trips { 1051 nss-1-crit { 1052 temperature = <110000>; 1053 hysteresis = <1000>; 1054 type = "critical"; 1055 }; 1056 }; 1057 }; 1058 1059 wcss-phya0-thermal { 1060 polling-delay-passive = <250>; 1061 1062 thermal-sensors = <&tsens 7>; 1063 1064 trips { 1065 wcss-phya0-crit { 1066 temperature = <110000>; 1067 hysteresis = <1000>; 1068 type = "critical"; 1069 }; 1070 }; 1071 }; 1072 1073 wcss-phya1-thermal { 1074 polling-delay-passive = <250>; 1075 1076 thermal-sensors = <&tsens 8>; 1077 1078 trips { 1079 wcss-phya1-crit { 1080 temperature = <110000>; 1081 hysteresis = <1000>; 1082 type = "critical"; 1083 }; 1084 }; 1085 }; 1086 1087 cpu0_thermal: cpu0-thermal { 1088 polling-delay-passive = <250>; 1089 1090 thermal-sensors = <&tsens 9>; 1091 1092 trips { 1093 cpu0-crit { 1094 temperature = <110000>; 1095 hysteresis = <1000>; 1096 type = "critical"; 1097 }; 1098 }; 1099 }; 1100 1101 cpu1_thermal: cpu1-thermal { 1102 polling-delay-passive = <250>; 1103 1104 thermal-sensors = <&tsens 10>; 1105 1106 trips { 1107 cpu1-crit { 1108 temperature = <110000>; 1109 hysteresis = <1000>; 1110 type = "critical"; 1111 }; 1112 }; 1113 }; 1114 1115 cpu2_thermal: cpu2-thermal { 1116 polling-delay-passive = <250>; 1117 1118 thermal-sensors = <&tsens 11>; 1119 1120 trips { 1121 cpu2-crit { 1122 temperature = <110000>; 1123 hysteresis = <1000>; 1124 type = "critical"; 1125 }; 1126 }; 1127 }; 1128 1129 cpu3_thermal: cpu3-thermal { 1130 polling-delay-passive = <250>; 1131 1132 thermal-sensors = <&tsens 12>; 1133 1134 trips { 1135 cpu3-crit { 1136 temperature = <110000>; 1137 hysteresis = <1000>; 1138 type = "critical"; 1139 }; 1140 }; 1141 }; 1142 1143 cluster_thermal: cluster-thermal { 1144 polling-delay-passive = <250>; 1145 1146 thermal-sensors = <&tsens 13>; 1147 1148 trips { 1149 cluster-crit { 1150 temperature = <110000>; 1151 hysteresis = <1000>; 1152 type = "critical"; 1153 }; 1154 }; 1155 }; 1156 1157 wcss-phyb0-thermal { 1158 polling-delay-passive = <250>; 1159 1160 thermal-sensors = <&tsens 14>; 1161 1162 trips { 1163 wcss-phyb0-crit { 1164 temperature = <110000>; 1165 hysteresis = <1000>; 1166 type = "critical"; 1167 }; 1168 }; 1169 }; 1170 1171 wcss-phyb1-thermal { 1172 polling-delay-passive = <250>; 1173 1174 thermal-sensors = <&tsens 15>; 1175 1176 trips { 1177 wcss-phyb1-crit { 1178 temperature = <110000>; 1179 hysteresis = <1000>; 1180 type = "critical"; 1181 }; 1182 }; 1183 }; 1184 }; 1185};
~/
Read-only file preview.