FILE
tegra194-p3668.dtsi
File preview with syntax highlighting.
linux-6.19.14/arch/arm64/boot/dts/nvidia/tegra194-p3668.dtsi
1// SPDX-License-Identifier: GPL-2.0 2#include "tegra194.dtsi" 3 4#include <dt-bindings/mfd/max77620.h> 5 6/ { 7 aliases { 8 ethernet0 = "/bus@0/ethernet@2490000"; 9 i2c0 = "/bpmp/i2c"; 10 i2c1 = "/bus@0/i2c@3160000"; 11 i2c2 = "/bus@0/i2c@c240000"; 12 i2c3 = "/bus@0/i2c@3180000"; 13 i2c4 = "/bus@0/i2c@3190000"; 14 i2c5 = "/bus@0/i2c@31c0000"; 15 i2c6 = "/bus@0/i2c@c250000"; 16 i2c7 = "/bus@0/i2c@31e0000"; 17 rtc0 = "/bpmp/i2c/pmic@3c"; 18 rtc1 = "/bus@0/rtc@c2a0000"; 19 serial0 = &tcu; 20 }; 21 22 chosen { 23 bootargs = "console=ttyTCU0,115200n8"; 24 stdout-path = "serial0:115200n8"; 25 }; 26 27 bus@0 { 28 ethernet@2490000 { 29 status = "okay"; 30 31 phy-reset-gpios = <&gpio TEGRA194_MAIN_GPIO(R, 1) GPIO_ACTIVE_LOW>; 32 phy-handle = <&phy>; 33 phy-mode = "rgmii-id"; 34 35 mdio { 36 #address-cells = <1>; 37 #size-cells = <0>; 38 39 phy: ethernet-phy@0 { 40 compatible = "ethernet-phy-ieee802.3-c22"; 41 reg = <0x0>; 42 interrupt-parent = <&gpio>; 43 interrupts = <TEGRA194_MAIN_GPIO(G, 4) IRQ_TYPE_LEVEL_LOW>; 44 #phy-cells = <0>; 45 wakeup-source; 46 }; 47 }; 48 }; 49 50 memory-controller@2c00000 { 51 status = "okay"; 52 }; 53 54 i2c@c250000 { 55 status = "okay"; 56 57 power-sensor@40 { 58 compatible = "ti,ina3221"; 59 reg = <0x40>; 60 #address-cells = <1>; 61 #size-cells = <0>; 62 63 input@0 { 64 reg = <0x0>; 65 label = "VDD_IN"; 66 shunt-resistor-micro-ohms = <5000>; 67 }; 68 input@1 { 69 reg = <0x1>; 70 label = "VDD_CPU_GPU_CV"; 71 shunt-resistor-micro-ohms = <5000>; 72 }; 73 input@2 { 74 reg = <0x2>; 75 label = "VDD_SOC"; 76 shunt-resistor-micro-ohms = <5000>; 77 }; 78 }; 79 }; 80 81 serial@3100000 { 82 /delete-property/ dmas; 83 /delete-property/ dma-names; 84 status = "okay"; 85 }; 86 87 i2c@3160000 { 88 status = "okay"; 89 90 eeprom@50 { 91 compatible = "atmel,24c02"; 92 reg = <0x50>; 93 94 label = "module"; 95 vcc-supply = <&vdd_1v8ls>; 96 address-width = <8>; 97 pagesize = <8>; 98 size = <256>; 99 read-only; 100 }; 101 }; 102 103 padctl@3520000 { 104 avdd-usb-supply = <&vdd_usb_3v3>; 105 vclamp-usb-supply = <&vdd_1v8ao>; 106 107 ports { 108 usb2-1 { 109 vbus-supply = <&vdd_5v0_sys>; 110 }; 111 112 usb2-3 { 113 vbus-supply = <&vdd_5v0_sys>; 114 }; 115 116 usb3-0 { 117 vbus-supply = <&vdd_5v0_sys>; 118 }; 119 120 usb3-3 { 121 vbus-supply = <&vdd_5v0_sys>; 122 }; 123 }; 124 }; 125 126 rtc@c2a0000 { 127 status = "okay"; 128 }; 129 130 pmc@c360000 { 131 nvidia,invert-interrupt; 132 }; 133 }; 134 135 bpmp { 136 i2c { 137 status = "okay"; 138 139 pmic: pmic@3c { 140 compatible = "maxim,max20024"; 141 reg = <0x3c>; 142 143 interrupt-parent = <&pmc>; 144 interrupts = <24 IRQ_TYPE_LEVEL_LOW>; 145 #interrupt-cells = <2>; 146 interrupt-controller; 147 148 #gpio-cells = <2>; 149 gpio-controller; 150 151 pinctrl-names = "default"; 152 pinctrl-0 = <&max20024_default>; 153 154 fps { 155 fps0 { 156 maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>; 157 maxim,shutdown-fps-time-period-us = <640>; 158 }; 159 160 fps1 { 161 maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN1>; 162 maxim,shutdown-fps-time-period-us = <640>; 163 maxim,device-state-on-disabled-event = <MAX77620_FPS_INACTIVE_STATE_SLEEP>; 164 }; 165 166 fps2 { 167 maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>; 168 maxim,shutdown-fps-time-period-us = <640>; 169 }; 170 }; 171 172 max20024_default: pinmux { 173 gpio0 { 174 pins = "gpio0"; 175 function = "gpio"; 176 }; 177 178 gpio1 { 179 pins = "gpio1"; 180 function = "fps-out"; 181 maxim,active-fps-source = <MAX77620_FPS_SRC_DEF>; 182 }; 183 184 gpio2 { 185 pins = "gpio2"; 186 function = "fps-out"; 187 maxim,active-fps-source = <MAX77620_FPS_SRC_DEF>; 188 }; 189 190 gpio3 { 191 pins = "gpio3"; 192 function = "fps-out"; 193 maxim,active-fps-source = <MAX77620_FPS_SRC_DEF>; 194 }; 195 196 gpio4 { 197 pins = "gpio4"; 198 function = "32k-out1"; 199 drive-push-pull = <1>; 200 }; 201 202 gpio6 { 203 pins = "gpio6"; 204 function = "gpio"; 205 drive-push-pull = <1>; 206 }; 207 208 gpio7 { 209 pins = "gpio7"; 210 function = "gpio"; 211 drive-push-pull = <0>; 212 }; 213 }; 214 215 regulators { 216 in-sd0-supply = <&vdd_5v0_sys>; 217 in-sd1-supply = <&vdd_5v0_sys>; 218 in-sd2-supply = <&vdd_5v0_sys>; 219 in-sd3-supply = <&vdd_5v0_sys>; 220 in-sd4-supply = <&vdd_5v0_sys>; 221 222 in-ldo0-1-supply = <&vdd_5v0_sys>; 223 in-ldo2-supply = <&vdd_5v0_sys>; 224 in-ldo3-5-supply = <&vdd_5v0_sys>; 225 in-ldo4-6-supply = <&vdd_5v0_sys>; 226 in-ldo7-8-supply = <&vdd_1v8ls>; 227 228 vdd_1v0: sd0 { 229 regulator-name = "VDDIO_SYS_1V0"; 230 regulator-min-microvolt = <1000000>; 231 regulator-max-microvolt = <1000000>; 232 regulator-always-on; 233 regulator-boot-on; 234 }; 235 236 vdd_1v8hs: sd1 { 237 regulator-name = "VDDIO_SYS_1V8HS"; 238 regulator-min-microvolt = <1800000>; 239 regulator-max-microvolt = <1800000>; 240 regulator-always-on; 241 regulator-boot-on; 242 }; 243 244 vdd_1v8ls: sd2 { 245 regulator-name = "VDDIO_SYS_1V8LS"; 246 regulator-min-microvolt = <1800000>; 247 regulator-max-microvolt = <1800000>; 248 regulator-always-on; 249 regulator-boot-on; 250 }; 251 252 vdd_1v8ao: sd3 { 253 regulator-name = "VDDIO_AO_1V8"; 254 regulator-min-microvolt = <1800000>; 255 regulator-max-microvolt = <1800000>; 256 regulator-always-on; 257 regulator-boot-on; 258 }; 259 260 sd4 { 261 regulator-name = "VDD_DDR_1V1"; 262 regulator-min-microvolt = <1100000>; 263 regulator-max-microvolt = <1100000>; 264 regulator-always-on; 265 regulator-boot-on; 266 }; 267 268 ldo0 { 269 regulator-name = "VDD_RTC"; 270 regulator-min-microvolt = <800000>; 271 regulator-max-microvolt = <800000>; 272 regulator-always-on; 273 regulator-boot-on; 274 }; 275 276 ldo2 { 277 regulator-name = "VDDIO_AO_3V3"; 278 regulator-min-microvolt = <3300000>; 279 regulator-max-microvolt = <3300000>; 280 regulator-always-on; 281 regulator-boot-on; 282 }; 283 284 vdd_emmc_3v3: ldo3 { 285 regulator-name = "VDD_EMMC_3V3"; 286 regulator-min-microvolt = <3300000>; 287 regulator-max-microvolt = <3300000>; 288 }; 289 290 vdd_usb_3v3: ldo5 { 291 regulator-name = "VDD_USB_3V3"; 292 regulator-min-microvolt = <3300000>; 293 regulator-max-microvolt = <3300000>; 294 regulator-always-on; 295 regulator-boot-on; 296 }; 297 298 ldo6 { 299 regulator-name = "VDD_SDIO_3V3"; 300 regulator-min-microvolt = <3300000>; 301 regulator-max-microvolt = <3300000>; 302 }; 303 304 ldo7 { 305 regulator-name = "AVDD_CSI_1V2"; 306 regulator-min-microvolt = <1200000>; 307 regulator-max-microvolt = <1200000>; 308 }; 309 }; 310 }; 311 }; 312 }; 313};
~/
Read-only file preview.