armada-8040-mcbin.dtsi

  1// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
  2/*
  3 * Copyright (C) 2016 Marvell Technology Group Ltd.
  4 *
  5 * Device Tree file for MACCHIATOBin Armada 8040 community board platform
  6 */
  7
  8#include "armada-8040.dtsi"
  9
 10#include <dt-bindings/gpio/gpio.h>
 11
 12/ {
 13	model = "Marvell 8040 MACCHIATOBin";
 14	compatible = "marvell,armada8040-mcbin", "marvell,armada8040",
 15			"marvell,armada-ap806-quad", "marvell,armada-ap806";
 16
 17	chosen {
 18		stdout-path = "serial0:115200n8";
 19	};
 20
 21	memory@0 {
 22		device_type = "memory";
 23		reg = <0x0 0x0 0x0 0x80000000>;
 24	};
 25
 26	aliases {
 27		ethernet0 = &cp0_eth0;
 28		ethernet1 = &cp1_eth0;
 29		ethernet2 = &cp1_eth1;
 30		ethernet3 = &cp1_eth2;
 31	};
 32
 33	/* Regulator labels correspond with schematics */
 34	v_3_3: regulator-3-3v {
 35		compatible = "regulator-fixed";
 36		regulator-name = "v_3_3";
 37		regulator-min-microvolt = <3300000>;
 38		regulator-max-microvolt = <3300000>;
 39		regulator-always-on;
 40		status = "okay";
 41	};
 42
 43	v_vddo_h: regulator-1-8v {
 44		compatible = "regulator-fixed";
 45		regulator-name = "v_vddo_h";
 46		regulator-min-microvolt = <1800000>;
 47		regulator-max-microvolt = <1800000>;
 48		regulator-always-on;
 49		status = "okay";
 50	};
 51
 52	v_5v0_usb3_hst_vbus: regulator-usb3-vbus0 {
 53		compatible = "regulator-fixed";
 54		enable-active-high;
 55		gpio = <&cp0_gpio2 15 GPIO_ACTIVE_HIGH>;
 56		pinctrl-names = "default";
 57		pinctrl-0 = <&cp0_xhci_vbus_pins>;
 58		regulator-name = "v_5v0_usb3_hst_vbus";
 59		regulator-min-microvolt = <5000000>;
 60		regulator-max-microvolt = <5000000>;
 61		status = "okay";
 62	};
 63
 64	sfp_eth0: sfp-eth0 {
 65		/* CON15,16 - CPM lane 4 */
 66		compatible = "sff,sfp";
 67		i2c-bus = <&sfpp0_i2c>;
 68		los-gpios = <&cp1_gpio1 28 GPIO_ACTIVE_HIGH>;
 69		mod-def0-gpios = <&cp1_gpio1 27 GPIO_ACTIVE_LOW>;
 70		tx-disable-gpios = <&cp1_gpio1 29 GPIO_ACTIVE_HIGH>;
 71		tx-fault-gpios = <&cp1_gpio1 26 GPIO_ACTIVE_HIGH>;
 72		pinctrl-names = "default";
 73		pinctrl-0 = <&cp1_sfpp0_pins>;
 74		maximum-power-milliwatt = <2000>;
 75	};
 76
 77	sfp_eth1: sfp-eth1 {
 78		/* CON17,18 - CPS lane 4 */
 79		compatible = "sff,sfp";
 80		i2c-bus = <&sfpp1_i2c>;
 81		los-gpios = <&cp1_gpio1 8 GPIO_ACTIVE_HIGH>;
 82		mod-def0-gpios = <&cp1_gpio1 11 GPIO_ACTIVE_LOW>;
 83		tx-disable-gpios = <&cp1_gpio1 10 GPIO_ACTIVE_HIGH>;
 84		tx-fault-gpios = <&cp0_gpio2 30 GPIO_ACTIVE_HIGH>;
 85		pinctrl-names = "default";
 86		pinctrl-0 = <&cp1_sfpp1_pins &cp0_sfpp1_pins>;
 87		maximum-power-milliwatt = <2000>;
 88	};
 89
 90	sfp_eth3: sfp-eth3 {
 91		/* CON13,14 - CPS lane 5 */
 92		compatible = "sff,sfp";
 93		i2c-bus = <&sfp_1g_i2c>;
 94		los-gpios = <&cp0_gpio2 22 GPIO_ACTIVE_HIGH>;
 95		mod-def0-gpios = <&cp0_gpio2 21 GPIO_ACTIVE_LOW>;
 96		tx-disable-gpios = <&cp1_gpio1 24 GPIO_ACTIVE_HIGH>;
 97		tx-fault-gpios = <&cp0_gpio2 19 GPIO_ACTIVE_HIGH>;
 98		pinctrl-names = "default";
 99		pinctrl-0 = <&cp0_sfp_1g_pins &cp1_sfp_1g_pins>;
100		maximum-power-milliwatt = <2000>;
101	};
102};
103
104&uart0 {
105	status = "okay";
106	pinctrl-0 = <&uart0_pins>;
107	pinctrl-names = "default";
108};
109
110&ap_sdhci0 {
111	bus-width = <8>;
112	/*
113	 * Not stable in HS modes - phy needs "more calibration", so add
114	 * the "slow-mode" and disable SDR104, SDR50 and DDR50 modes.
115	 */
116	marvell,xenon-phy-slow-mode;
117	no-1-8-v;
118	no-sd;
119	no-sdio;
120	non-removable;
121	status = "okay";
122	vqmmc-supply = <&v_vddo_h>;
123};
124
125&cp0_i2c0 {
126	clock-frequency = <100000>;
127	pinctrl-names = "default";
128	pinctrl-0 = <&cp0_i2c0_pins>;
129	status = "okay";
130};
131
132&cp0_i2c1 {
133	clock-frequency = <100000>;
134	pinctrl-names = "default";
135	pinctrl-0 = <&cp0_i2c1_pins>;
136	status = "okay";
137
138	i2c-mux@70 {
139		compatible = "nxp,pca9548";
140		#address-cells = <1>;
141		#size-cells = <0>;
142		reg = <0x70>;
143
144		sfpp0_i2c: i2c@0 {
145			#address-cells = <1>;
146			#size-cells = <0>;
147			reg = <0>;
148		};
149		sfpp1_i2c: i2c@1 {
150			#address-cells = <1>;
151			#size-cells = <0>;
152			reg = <1>;
153		};
154		sfp_1g_i2c: i2c@2 {
155			#address-cells = <1>;
156			#size-cells = <0>;
157			reg = <2>;
158		};
159	};
160};
161
162/* J25 UART header */
163&cp0_uart1 {
164	pinctrl-names = "default";
165	pinctrl-0 = <&cp0_uart1_pins>;
166	status = "okay";
167};
168
169&cp0_mdio {
170	pinctrl-names = "default";
171	pinctrl-0 = <&cp0_ge_mdio_pins>;
172	status = "okay";
173
174	ge_phy: ethernet-phy@0 {
175		reg = <0>;
176	};
177};
178
179&cp0_pcie0 {
180	pinctrl-names = "default";
181	pinctrl-0 = <&cp0_pcie_pins>;
182	num-lanes = <4>;
183	num-viewport = <8>;
184	reset-gpios = <&cp0_gpio2 20 GPIO_ACTIVE_LOW>;
185	ranges = <0x82000000 0x0 0xc0000000 0x0 0xc0000000 0x0 0x20000000>;
186	phys = <&cp0_comphy0 0>, <&cp0_comphy1 0>,
187	       <&cp0_comphy2 0>, <&cp0_comphy3 0>;
188	phy-names = "cp0-pcie0-x4-lane0-phy", "cp0-pcie0-x4-lane1-phy",
189		    "cp0-pcie0-x4-lane2-phy", "cp0-pcie0-x4-lane3-phy";
190	status = "okay";
191};
192
193&cp0_pinctrl {
194	cp0_ge_mdio_pins: ge-mdio-pins {
195		marvell,pins = "mpp32", "mpp34";
196		marvell,function = "ge";
197	};
198	cp0_i2c1_pins: i2c1-pins {
199		marvell,pins = "mpp35", "mpp36";
200		marvell,function = "i2c1";
201	};
202	cp0_i2c0_pins: i2c0-pins {
203		marvell,pins = "mpp37", "mpp38";
204		marvell,function = "i2c0";
205	};
206	cp0_uart1_pins: uart1-pins {
207		marvell,pins = "mpp40", "mpp41";
208		marvell,function = "uart1";
209	};
210	cp0_xhci_vbus_pins: xhci0-vbus-pins {
211		marvell,pins = "mpp47";
212		marvell,function = "gpio";
213	};
214	cp0_sfp_1g_pins: sfp-1g-pins {
215		marvell,pins = "mpp51", "mpp53", "mpp54";
216		marvell,function = "gpio";
217	};
218	cp0_pcie_pins: pcie-pins {
219		marvell,pins = "mpp52";
220		marvell,function = "gpio";
221	};
222	cp0_sdhci_pins: sdhci-pins {
223		marvell,pins = "mpp55", "mpp56", "mpp57", "mpp58", "mpp59",
224			       "mpp60", "mpp61";
225		marvell,function = "sdio";
226	};
227	cp0_sfpp1_pins: sfpp1-pins {
228		marvell,pins = "mpp62";
229		marvell,function = "gpio";
230	};
231};
232
233&cp0_ethernet {
234	status = "okay";
235};
236
237&cp0_eth0 {
238	/* Generic PHY, providing serdes lanes */
239	phys = <&cp0_comphy4 0>;
240};
241
242&cp0_sata0 {
243	status = "okay";
244
245	/* CPM Lane 5 - U29 */
246	sata-port@1 {
247		phys = <&cp0_comphy5 1>;
248		status = "okay";
249	};
250};
251
252&cp0_sdhci0 {
253	/* U6 */
254	broken-cd;
255	bus-width = <4>;
256	pinctrl-names = "default";
257	pinctrl-0 = <&cp0_sdhci_pins>;
258	status = "okay";
259	vqmmc-supply = <&v_3_3>;
260};
261
262&cp0_utmi {
263	status = "okay";
264};
265
266&cp0_usb3_0 {
267	/* J38? - USB2.0 only */
268	phys = <&cp0_utmi0>;
269	phy-names = "utmi";
270	dr_mode = "host";
271	status = "okay";
272};
273
274&cp0_usb3_1 {
275	/* J38? - USB2.0 only */
276	phys = <&cp0_utmi1>;
277	phy-names = "utmi";
278	dr_mode = "host";
279	status = "okay";
280};
281
282&cp1_ethernet {
283	status = "okay";
284};
285
286&cp1_eth0 {
287	/* Generic PHY, providing serdes lanes */
288	phys = <&cp1_comphy4 0>;
289};
290
291&cp1_eth1 {
292	/* CPS Lane 0 - J5 (Gigabit RJ45) */
293	status = "okay";
294	/* Network PHY */
295	phy = <&ge_phy>;
296	phy-mode = "sgmii";
297	/* Generic PHY, providing serdes lanes */
298	phys = <&cp1_comphy0 1>;
299};
300
301&cp1_eth2 {
302	/* CPS Lane 5 */
303	status = "okay";
304	/* Network PHY */
305	phy-mode = "2500base-x";
306	managed = "in-band-status";
307	/* Generic PHY, providing serdes lanes */
308	phys = <&cp1_comphy5 2>;
309	sfp = <&sfp_eth3>;
310};
311
312&cp1_pinctrl {
313	cp1_sfpp1_pins: sfpp1-pins {
314		marvell,pins = "mpp8", "mpp10", "mpp11";
315		marvell,function = "gpio";
316	};
317	cp1_spi1_pins: spi1-pins {
318		marvell,pins = "mpp12", "mpp13", "mpp14", "mpp15", "mpp16";
319		marvell,function = "spi1";
320	};
321	cp1_uart0_pins: uart0-pins {
322		marvell,pins = "mpp6", "mpp7";
323		marvell,function = "uart0";
324	};
325	cp1_sfp_1g_pins: sfp-1g-pins {
326		marvell,pins = "mpp24";
327		marvell,function = "gpio";
328	};
329	cp1_sfpp0_pins: sfpp0-pins {
330		marvell,pins = "mpp26", "mpp27", "mpp28", "mpp29";
331		marvell,function = "gpio";
332	};
333};
334
335/* J27 UART header */
336&cp1_uart0 {
337	pinctrl-names = "default";
338	pinctrl-0 = <&cp1_uart0_pins>;
339	status = "okay";
340};
341
342&cp1_sata0 {
343	status = "okay";
344
345	/* CPS Lane 1 - U32 */
346	sata-port@0 {
347		phys = <&cp1_comphy1 0>;
348		status = "okay";
349	};
350
351	/* CPS Lane 3 - U31 */
352	sata-port@1 {
353		phys = <&cp1_comphy3 1>;
354		status = "okay";
355	};
356};
357
358&cp1_spi1 {
359	pinctrl-names = "default";
360	pinctrl-0 = <&cp1_spi1_pins>;
361	status = "okay";
362
363	flash@0 {
364		compatible = "st,w25q32";
365		spi-max-frequency = <50000000>;
366		reg = <0>;
367	};
368};
369
370&cp1_comphy2 {
371	cp1_usbh0_con: connector {
372		compatible = "usb-a-connector";
373		phy-supply = <&v_5v0_usb3_hst_vbus>;
374	};
375};
376
377&cp1_utmi {
378	status = "okay";
379};
380
381&cp1_usb3_0 {
382	/* CPS Lane 2 - CON7 */
383	phys = <&cp1_comphy2 0>, <&cp1_utmi0>;
384	phy-names = "cp1-usb3h0-comphy", "utmi";
385	dr_mode = "host";
386	status = "okay";
387};