imx8x-colibri-eval-v3.dtsi

  1// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
  2/*
  3 * Copyright 2019 Toradex
  4 */
  5
  6#include <dt-bindings/input/linux-event-codes.h>
  7
  8/ {
  9	aliases {
 10		rtc0 = &rtc_i2c;
 11		rtc1 = &rtc;
 12	};
 13
 14	/* fixed crystal dedicated to mcp25xx */
 15	clk16m: clock-16mhz {
 16		compatible = "fixed-clock";
 17		#clock-cells = <0>;
 18		clock-frequency = <16000000>;
 19	};
 20};
 21
 22/* Colibri Analogue Inputs */
 23&adc0 {
 24	status = "okay";
 25};
 26
 27/* Colibri PWM_A */
 28&adma_pwm {
 29	status = "okay";
 30};
 31
 32&colibri_gpio_keys {
 33	status = "okay";
 34};
 35
 36&extcon_usbc_det {
 37	status = "okay";
 38};
 39
 40&i2c1 {
 41	status = "okay";
 42
 43	/* M41T0M6 real time clock on carrier board */
 44	rtc_i2c: rtc@68 {
 45		compatible = "st,m41t0";
 46		reg = <0x68>;
 47	};
 48};
 49
 50&iomuxc {
 51	pinctrl-names = "default";
 52	pinctrl-0 = <&pinctrl_ext_io0>, <&pinctrl_hog0>, <&pinctrl_hog1>,
 53		    <&pinctrl_lpspi2_cs2>;
 54};
 55
 56/* Colibri SPI */
 57&lpspi2 {
 58	status = "okay";
 59
 60	mcp2515: can@0 {
 61		compatible = "microchip,mcp2515";
 62		reg = <0>;
 63		interrupt-parent = <&lsio_gpio3>;
 64		interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
 65		pinctrl-0 = <&pinctrl_can_int>;
 66		pinctrl-names = "default";
 67		clocks = <&clk16m>;
 68		spi-max-frequency = <10000000>;
 69	};
 70};
 71
 72/* Colibri UART_B */
 73&lpuart0 {
 74	status = "okay";
 75};
 76
 77/* Colibri UART_C */
 78&lpuart2 {
 79	status = "okay";
 80};
 81
 82/* Colibri PWM_B */
 83&lsio_pwm0 {
 84	status = "okay";
 85};
 86
 87/* Colibri PWM_C */
 88&lsio_pwm1 {
 89	status = "okay";
 90};
 91
 92/* Colibri PWM_D */
 93&lsio_pwm2 {
 94	status = "okay";
 95};
 96
 97/* Colibri UART_A */
 98&lpuart3 {
 99	status = "okay";
100};
101
102/* Colibri FastEthernet */
103&fec1 {
104	status = "okay";
105};
106
107/* USB PHY for usbotg3 */
108&usb3_phy {
109	status = "okay";
110};
111
112&usbotg1 {
113	status = "okay";
114};
115
116&usbotg3 {
117	status = "okay";
118};
119
120&usbotg3_cdns3 {
121	status = "okay";
122};
123
124/* USB PHY for usbotg1 */
125&usbphy1 {
126	status = "okay";
127};
128
129/* Colibri SD/MMC Card */
130&usdhc2 {
131	status = "okay";
132};