fsl-lx2160a-cex7.dtsi

  1// SPDX-License-Identifier: (GPL-2.0 OR MIT)
  2//
  3// Device Tree file for LX2160A-CEx7
  4//
  5// Copyright 2019 SolidRun Ltd.
  6
  7/dts-v1/;
  8
  9#include "fsl-lx2160a.dtsi"
 10
 11/ {
 12	model = "SolidRun LX2160A COM Express Type 7 module";
 13	compatible = "solidrun,lx2160a-cex7", "fsl,lx2160a";
 14
 15	aliases {
 16		crypto = &crypto;
 17	};
 18
 19	sb_3v3: regulator-sb3v3 {
 20		compatible = "regulator-fixed";
 21		regulator-name = "RT7290";
 22		regulator-min-microvolt = <3300000>;
 23		regulator-max-microvolt = <3300000>;
 24		regulator-boot-on;
 25		regulator-always-on;
 26	};
 27};
 28
 29&crypto {
 30	status = "okay";
 31};
 32
 33&dpmac17 {
 34	phy-handle = <&rgmii_phy1>;
 35	phy-connection-type = "rgmii-id";
 36};
 37
 38&emdio1 {
 39	status = "okay";
 40
 41	rgmii_phy1: ethernet-phy@1 {
 42		reg = <1>;
 43		qca,smarteee-tw-us-1g = <24>;
 44		interrupts-extended = <&gpio2 4 IRQ_TYPE_EDGE_FALLING>;
 45	};
 46};
 47
 48&esdhc1 {
 49	mmc-hs200-1_8v;
 50	mmc-hs400-1_8v;
 51	bus-width = <8>;
 52	status = "okay";
 53};
 54
 55&i2c0 {
 56	status = "okay";
 57
 58	i2c-mux@77 {
 59		compatible = "nxp,pca9547";
 60		#address-cells = <1>;
 61		#size-cells = <0>;
 62		reg = <0x77>;
 63
 64		i2c@0 {
 65			#address-cells = <1>;
 66			#size-cells = <0>;
 67			reg = <0>;
 68
 69			eeprom@50 {
 70				compatible = "atmel,24c512";
 71				reg = <0x50>;
 72			};
 73
 74			eeprom@51 {
 75				compatible = "atmel,spd";
 76				reg = <0x51>;
 77			};
 78
 79			eeprom@53 {
 80				compatible = "atmel,spd";
 81				reg = <0x53>;
 82			};
 83
 84			eeprom@57 {
 85				compatible = "atmel,24c02";
 86				reg = <0x57>;
 87			};
 88		};
 89
 90		i2c@1 {
 91			#address-cells = <1>;
 92			#size-cells = <0>;
 93			reg = <1>;
 94
 95			fan-temperature-ctrlr@18 {
 96				compatible = "ti,amc6821";
 97				reg = <0x18>;
 98			};
 99		};
100
101		i2c@2 {
102			#address-cells = <1>;
103			#size-cells = <0>;
104			reg = <2>;
105
106			regulator@5c {
107				compatible = "lltc,ltc3882";
108				reg = <0x5c>;
109			};
110		};
111
112		i2c@3 {
113			#address-cells = <1>;
114			#size-cells = <0>;
115			reg = <3>;
116
117			temperature-sensor@48 {
118				compatible = "nxp,sa56004";
119				reg = <0x48>;
120				vcc-supply = <&sb_3v3>;
121			};
122		};
123
124		sfp0_i2c: i2c@4 {
125			#address-cells = <1>;
126			#size-cells = <0>;
127			reg = <4>;
128		};
129
130		sfp1_i2c: i2c@5 {
131			#address-cells = <1>;
132			#size-cells = <0>;
133			reg = <5>;
134		};
135
136		sfp2_i2c: i2c@6 {
137			#address-cells = <1>;
138			#size-cells = <0>;
139			reg = <6>;
140		};
141
142		sfp3_i2c: i2c@7 {
143			#address-cells = <1>;
144			#size-cells = <0>;
145			reg = <7>;
146		};
147	};
148};
149
150&i2c2 {
151	status = "okay";
152};
153
154&i2c4 {
155	status = "okay";
156
157	rtc@51 {
158		compatible = "nxp,pcf2129";
159		reg = <0x51>;
160		interrupts-extended = <&gpio2 8 IRQ_TYPE_LEVEL_LOW>;
161	};
162};
163
164&fspi {
165	status = "okay";
166
167	flash@0 {
168		#address-cells = <1>;
169		#size-cells = <1>;
170		compatible = "micron,m25p80";
171		m25p,fast-read;
172		spi-max-frequency = <50000000>;
173		reg = <0>;
174		/* The following setting enables 1-1-8 (CMD-ADDR-DATA) mode */
175		spi-rx-bus-width = <8>;
176		spi-tx-bus-width = <1>;
177	};
178};
179
180&usb0 {
181	status = "okay";
182};
183
184&usb1 {
185	status = "okay";
186};