File Index
Files and directories
Sign in
FILE

stingray-fs4.dtsi

File preview with syntax highlighting.

linux-6.19.14/arch/arm64/boot/dts/broadcom/stingray/stingray-fs4.dtsi DEVICETREE
  1/*
  2 *  BSD LICENSE
  3 *
  4 *  Copyright(c) 2016-2017 Broadcom.  All rights reserved.
  5 *
  6 *  Redistribution and use in source and binary forms, with or without
  7 *  modification, are permitted provided that the following conditions
  8 *  are met:
  9 *
 10 *    * Redistributions of source code must retain the above copyright
 11 *      notice, this list of conditions and the following disclaimer.
 12 *    * Redistributions in binary form must reproduce the above copyright
 13 *      notice, this list of conditions and the following disclaimer in
 14 *      the documentation and/or other materials provided with the
 15 *      distribution.
 16 *    * Neither the name of Broadcom nor the names of its
 17 *      contributors may be used to endorse or promote products derived
 18 *      from this software without specific prior written permission.
 19 *
 20 *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 21 *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 22 *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
 23 *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
 24 *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
 25 *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
 26 *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 27 *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 28 *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 29 *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
 30 *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 31 */
 32
 33	fs4: fs4 {
 34		compatible = "simple-bus";
 35		#address-cells = <1>;
 36		#size-cells = <1>;
 37		ranges = <0x0 0x0 0x67000000 0x00800000>;
 38
 39		crypto_mbox: crypto_mbox@0 {
 40			compatible = "brcm,iproc-flexrm-mbox";
 41			reg = <0x00000000 0x200000>;
 42			msi-parent = <&gic_its 0x4100>;
 43			#mbox-cells = <3>;
 44			dma-coherent;
 45		};
 46
 47		raid_mbox: raid_mbox@400000 {
 48			compatible = "brcm,iproc-flexrm-mbox";
 49			reg = <0x00400000 0x200000>;
 50			dma-coherent;
 51			msi-parent = <&gic_its 0x4300>;
 52			#mbox-cells = <3>;
 53		};
 54
 55		raid0: raid@0 {
 56			compatible = "brcm,iproc-sba-v2";
 57			mboxes = <&raid_mbox 0 0x1 0xff00>,
 58				 <&raid_mbox 1 0x1 0xff00>,
 59				 <&raid_mbox 2 0x1 0xff00>,
 60				 <&raid_mbox 3 0x1 0xff00>;
 61		};
 62
 63		raid1: raid@1 {
 64			compatible = "brcm,iproc-sba-v2";
 65			mboxes = <&raid_mbox 4 0x1 0xff00>,
 66				 <&raid_mbox 5 0x1 0xff00>,
 67				 <&raid_mbox 6 0x1 0xff00>,
 68				 <&raid_mbox 7 0x1 0xff00>;
 69		};
 70
 71		raid2: raid@2 {
 72			compatible = "brcm,iproc-sba-v2";
 73			mboxes = <&raid_mbox 8 0x1 0xff00>,
 74				 <&raid_mbox 9 0x1 0xff00>,
 75				 <&raid_mbox 10 0x1 0xff00>,
 76				 <&raid_mbox 11 0x1 0xff00>;
 77		};
 78
 79		raid3: raid@3 {
 80			compatible = "brcm,iproc-sba-v2";
 81			mboxes = <&raid_mbox 12 0x1 0xff00>,
 82				 <&raid_mbox 13 0x1 0xff00>,
 83				 <&raid_mbox 14 0x1 0xff00>,
 84				 <&raid_mbox 15 0x1 0xff00>;
 85		};
 86
 87		raid4: raid@4 {
 88			compatible = "brcm,iproc-sba-v2";
 89			mboxes = <&raid_mbox 16 0x1 0xff00>,
 90				 <&raid_mbox 17 0x1 0xff00>,
 91				 <&raid_mbox 18 0x1 0xff00>,
 92				 <&raid_mbox 19 0x1 0xff00>;
 93		};
 94
 95		raid5: raid@5 {
 96			compatible = "brcm,iproc-sba-v2";
 97			mboxes = <&raid_mbox 20 0x1 0xff00>,
 98				 <&raid_mbox 21 0x1 0xff00>,
 99				 <&raid_mbox 22 0x1 0xff00>,
100				 <&raid_mbox 23 0x1 0xff00>;
101		};
102
103		raid6: raid@6 {
104			compatible = "brcm,iproc-sba-v2";
105			mboxes = <&raid_mbox 24 0x1 0xff00>,
106				 <&raid_mbox 25 0x1 0xff00>,
107				 <&raid_mbox 26 0x1 0xff00>,
108				 <&raid_mbox 27 0x1 0xff00>;
109		};
110
111		raid7: raid@7 {
112			compatible = "brcm,iproc-sba-v2";
113			mboxes = <&raid_mbox 28 0x1 0xff00>,
114				 <&raid_mbox 29 0x1 0xff00>,
115				 <&raid_mbox 30 0x1 0xff00>,
116				 <&raid_mbox 31 0x1 0xff00>;
117		};
118	};
~/ Read-only file preview.