sun50i-h6-tanix.dtsi

  1// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
  2// Copyright (c) 2019 Jernej Skrabec <jernej.skrabec@siol.net>
  3
  4/dts-v1/;
  5
  6#include "sun50i-h6.dtsi"
  7#include "sun50i-h6-cpu-opp.dtsi"
  8
  9#include <dt-bindings/gpio/gpio.h>
 10
 11/ {
 12	aliases {
 13		serial0 = &uart0;
 14	};
 15
 16	chosen {
 17		stdout-path = "serial0:115200n8";
 18	};
 19
 20	connector {
 21		compatible = "hdmi-connector";
 22		ddc-en-gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */
 23		type = "a";
 24
 25		port {
 26			hdmi_con_in: endpoint {
 27				remote-endpoint = <&hdmi_out_con>;
 28			};
 29		};
 30	};
 31
 32	/* used for FD650 LED display driver */
 33	i2c {
 34		compatible = "i2c-gpio";
 35		sda-gpios = <&pio 7 6 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; /* PH6 */
 36		scl-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; /* PH5 */
 37		i2c-gpio,delay-us = <5>;
 38	};
 39
 40	reg_vcc1v8: regulator-vcc1v8 {
 41		compatible = "regulator-fixed";
 42		regulator-name = "vcc1v8";
 43		regulator-min-microvolt = <1800000>;
 44		regulator-max-microvolt = <1800000>;
 45	};
 46
 47	reg_vcc3v3: regulator-vcc3v3 {
 48		compatible = "regulator-fixed";
 49		regulator-name = "vcc3v3";
 50		regulator-min-microvolt = <3300000>;
 51		regulator-max-microvolt = <3300000>;
 52	};
 53
 54	reg_vdd_cpu_gpu: regulator-vdd-cpu-gpu {
 55		compatible = "regulator-fixed";
 56		regulator-name = "vdd-cpu-gpu";
 57		regulator-min-microvolt = <1135000>;
 58		regulator-max-microvolt = <1135000>;
 59	};
 60
 61	sound-spdif {
 62		compatible = "simple-audio-card";
 63		simple-audio-card,name = "sun50i-h6-spdif";
 64
 65		simple-audio-card,cpu {
 66			sound-dai = <&spdif>;
 67		};
 68
 69		simple-audio-card,codec {
 70			sound-dai = <&spdif_out>;
 71		};
 72	};
 73
 74	spdif_out: spdif-out {
 75		#sound-dai-cells = <0>;
 76		compatible = "linux,spdif-dit";
 77	};
 78
 79	wifi_pwrseq: wifi-pwrseq {
 80		compatible = "mmc-pwrseq-simple";
 81		clocks = <&rtc CLK_OSC32K_FANOUT>;
 82		clock-names = "ext_clock";
 83		reset-gpios = <&r_pio 1 3 GPIO_ACTIVE_LOW>; /* PM3 */
 84	};
 85};
 86
 87&cpu0 {
 88	cpu-supply = <&reg_vdd_cpu_gpu>;
 89};
 90
 91&de {
 92	status = "okay";
 93};
 94
 95&dwc3 {
 96	status = "okay";
 97};
 98
 99&ehci0 {
100	status = "okay";
101};
102
103&ehci3 {
104	status = "okay";
105};
106
107&gpu {
108	mali-supply = <&reg_vdd_cpu_gpu>;
109	status = "okay";
110};
111
112&hdmi {
113	status = "okay";
114};
115
116&hdmi_out {
117	hdmi_out_con: endpoint {
118		remote-endpoint = <&hdmi_con_in>;
119	};
120};
121
122&mmc0 {
123	pinctrl-names = "default";
124	pinctrl-0 = <&mmc0_pins>;
125	vmmc-supply = <&reg_vcc3v3>;
126	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
127	disable-wp;
128	bus-width = <4>;
129	status = "okay";
130};
131
132&mmc1 {
133	vmmc-supply = <&reg_vcc3v3>;
134	vqmmc-supply = <&reg_vcc1v8>;
135	mmc-pwrseq = <&wifi_pwrseq>;
136	bus-width = <4>;
137	non-removable;
138	status = "okay";
139};
140
141&mmc2 {
142	vmmc-supply = <&reg_vcc3v3>;
143	vqmmc-supply = <&reg_vcc1v8>;
144	bus-width = <8>;
145	non-removable;
146	cap-mmc-hw-reset;
147	mmc-hs200-1_8v;
148	status = "okay";
149};
150
151&ohci0 {
152	status = "okay";
153};
154
155&ohci3 {
156	status = "okay";
157};
158
159&pio {
160	vcc-pc-supply = <&reg_vcc1v8>;
161	vcc-pd-supply = <&reg_vcc3v3>;
162	vcc-pg-supply = <&reg_vcc1v8>;
163};
164
165&r_ir {
166	status = "okay";
167};
168
169&spdif {
170	pinctrl-names = "default";
171	pinctrl-0 = <&spdif_tx_pin>;
172	status = "okay";
173};
174
175&uart0 {
176	pinctrl-names = "default";
177	pinctrl-0 = <&uart0_ph_pins>;
178	status = "okay";
179};
180
181&usb2otg {
182	dr_mode = "host";
183	status = "okay";
184};
185
186&usb2phy {
187	status = "okay";
188};
189
190&usb3phy {
191	status = "okay";
192};