stm32mp157f-dk2-scmi.dtsi

  1// SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause)
  2/*
  3 * Copyright (C) STMicroelectronics 2025 - All Rights Reserved
  4 * Author: Amelie Delaunay <amelie.delaunay@foss.st.com> for STMicroelectronics.
  5 */
  6
  7#include "stm32mp15-scmi.dtsi"
  8
  9/ {
 10	reserved-memory {
 11		optee@de000000 {
 12			reg = <0xde000000 0x2000000>;
 13			no-map;
 14		};
 15	};
 16
 17	arm_wdt: watchdog {
 18		compatible = "arm,smc-wdt";
 19		arm,smc-id = <0xbc000000>;
 20		status = "disabled";
 21	};
 22
 23};
 24
 25&adc {
 26	vdd-supply = <&scmi_vdd>;
 27	vdda-supply = <&scmi_vdd>;
 28};
 29
 30&cpu0 {
 31	clocks = <&scmi_clk CK_SCMI_MPU>;
 32};
 33
 34&cpu1 {
 35	clocks = <&scmi_clk CK_SCMI_MPU>;
 36};
 37
 38&cryp1 {
 39	clocks = <&scmi_clk CK_SCMI_CRYP1>;
 40	resets = <&scmi_reset RST_SCMI_CRYP1>;
 41};
 42
 43&cs42l51 {
 44	VL-supply = <&scmi_v3v3>;
 45	VD-supply = <&scmi_v1v8_audio>;
 46	VA-supply = <&scmi_v1v8_audio>;
 47	VAHP-supply = <&scmi_v1v8_audio>;
 48};
 49
 50&dsi {
 51	phy-dsi-supply = <&scmi_reg18>;
 52	clocks = <&rcc DSI>, <&scmi_clk CK_SCMI_HSE>, <&rcc DSI_PX>;
 53};
 54
 55&gpioz {
 56	clocks = <&scmi_clk CK_SCMI_GPIOZ>;
 57};
 58
 59&hash1 {
 60	clocks = <&scmi_clk CK_SCMI_HASH1>;
 61	resets = <&scmi_reset RST_SCMI_HASH1>;
 62};
 63
 64&i2c1 {
 65	hdmi-transmitter@39 {
 66		iovcc-supply = <&scmi_v3v3_hdmi>;
 67		cvcc12-supply = <&scmi_v1v2_hdmi>;
 68	};
 69};
 70
 71&iwdg2 {
 72	clocks = <&rcc IWDG2>, <&scmi_clk CK_SCMI_LSI>;
 73	status = "disabled";
 74};
 75
 76&m4_rproc {
 77	/delete-property/ st,syscfg-holdboot;
 78	resets = <&scmi_reset RST_SCMI_MCU>,
 79		 <&scmi_reset RST_SCMI_MCU_HOLD_BOOT>;
 80	reset-names = "mcu_rst", "hold_boot";
 81};
 82
 83&mdma1 {
 84	resets = <&scmi_reset RST_SCMI_MDMA>;
 85};
 86
 87&optee {
 88	interrupt-parent = <&intc>;
 89	interrupts = <GIC_PPI 15 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
 90};
 91
 92&pwr_regulators {
 93	vdd-supply = <&scmi_vdd>;
 94	vdd_3v3_usbfs-supply = <&scmi_vdd_usb>;
 95	status = "disabled";
 96};
 97
 98&rcc {
 99	compatible = "st,stm32mp1-rcc-secure", "syscon";
100	clock-names = "hse", "hsi", "csi", "lse", "lsi";
101	clocks = <&scmi_clk CK_SCMI_HSE>,
102		 <&scmi_clk CK_SCMI_HSI>,
103		 <&scmi_clk CK_SCMI_CSI>,
104		 <&scmi_clk CK_SCMI_LSE>,
105		 <&scmi_clk CK_SCMI_LSI>;
106};
107
108&rng1 {
109	clocks = <&scmi_clk CK_SCMI_RNG1>;
110	resets = <&scmi_reset RST_SCMI_RNG1>;
111};
112
113&rtc {
114	clocks = <&scmi_clk CK_SCMI_RTCAPB>, <&scmi_clk CK_SCMI_RTC>;
115};
116
117&scmi_reguls {
118	scmi_vddcore: regulator@3 {
119		reg = <VOLTD_SCMI_STPMIC1_BUCK1>;
120		regulator-name = "vddcore";
121	};
122
123	scmi_vdd: regulator@5 {
124		reg = <VOLTD_SCMI_STPMIC1_BUCK3>;
125		regulator-name = "vdd";
126	};
127
128	scmi_v3v3: regulator@6 {
129		reg = <VOLTD_SCMI_STPMIC1_BUCK4>;
130		regulator-name = "v3v3";
131	};
132
133	scmi_v1v8_audio: regulator@7 {
134		reg = <VOLTD_SCMI_STPMIC1_LDO1>;
135		regulator-name = "v1v8_audio";
136	};
137
138	scmi_v3v3_hdmi: regulator@8 {
139		reg = <VOLTD_SCMI_STPMIC1_LDO2>;
140		regulator-name = "v3v3_hdmi";
141	};
142
143	scmi_vdd_usb: regulator@a {
144		reg = <VOLTD_SCMI_STPMIC1_LDO4>;
145		regulator-name = "vdd_usb";
146	};
147
148	scmi_vdda: regulator@b {
149		reg = <VOLTD_SCMI_STPMIC1_LDO5>;
150		regulator-name = "vdda";
151	};
152
153	scmi_v1v2_hdmi: regulator@c {
154		reg = <VOLTD_SCMI_STPMIC1_LDO6>;
155		regulator-name = "v1v2_hdmi";
156		regulator-min-microvolt = <1200000>;
157		regulator-max-microvolt = <1200000>;
158		regulator-always-on;
159	};
160
161	scmi_vbus_otg: regulator@f {
162		reg = <VOLTD_SCMI_STPMIC1_PWR_SW1>;
163		regulator-name = "vbus_otg";
164	 };
165
166	 scmi_vbus_sw: regulator@10 {
167		reg = <VOLTD_SCMI_STPMIC1_PWR_SW2>;
168		regulator-name = "vbus_sw";
169	 };
170};
171
172&sdmmc1 {
173	vmmc-supply = <&scmi_v3v3>;
174};
175
176&sdmmc3 {
177	vmmc-supply = <&scmi_v3v3>;
178};
179
180&usbh_ehci {
181	hub@1 {
182		vdd-supply = <&scmi_v3v3>;
183	};
184};
185
186&usbphyc_port0 {
187	phy-supply = <&scmi_vdd_usb>;
188};
189
190&usbphyc_port1 {
191	phy-supply = <&scmi_vdd_usb>;
192};
193
194&vrefbuf {
195	vdda-supply = <&scmi_vdd>;
196};