File Index
Files and directories
Sign in
FILE

exynos4212-tab3.dtsi

File preview with syntax highlighting.

linux-6.19.14/arch/arm/boot/dts/samsung/exynos4212-tab3.dtsi DEVICETREE 
   1// SPDX-License-Identifier: GPL-2.0
   2/*
   3 * Samsung's Exynos4212 based Galaxy Tab 3 board common source
   4 *
   5 * Copyright (c) 2013 Samsung Electronics Co., Ltd.
   6 *		http://www.samsung.com
   7 */
   8
   9/dts-v1/;
  10#include "exynos4212.dtsi"
  11#include "exynos4412-ppmu-common.dtsi"
  12#include "exynos-mfc-reserved-memory.dtsi"
  13#include <dt-bindings/clock/samsung,s2mps11.h>
  14#include <dt-bindings/gpio/gpio.h>
  15#include <dt-bindings/leds/common.h>
  16#include <dt-bindings/input/gpio-keys.h>
  17#include <dt-bindings/input/input.h>
  18#include <dt-bindings/interrupt-controller/irq.h>
  19#include "exynos-pinctrl.h"
  20
  21/ {
  22	compatible = "samsung,tab3", "samsung,exynos4212", "samsung,exynos4";
  23
  24	memory@40000000 {
  25		device_type = "memory";
  26
  27		/*
  28		 * Technically 1.5GB is available, but the latter 512MB is handled
  29		 * in a special way by downstream (every second page is skipped),
  30		 * and thus doesn't initialize correctly on mainline. Only 1020M is
  31		 * used for now.
  32		 */
  33		reg = <0x40000000 0x3fc00000>;
  34	};
  35
  36	aliases {
  37		mmc0 = &mshc_0;   /* Internal storage */
  38		mmc1 = &sdhci_2;  /* SD card */
  39		mmc2 = &sdhci_3;  /* WiFi */
  40	};
  41
  42	chosen {
  43		stdout-path = &serial_2;
  44
  45		/* Default S-BOOT bootloader loads initramfs here */
  46		linux,initrd-start = <0x42000000>;
  47		linux,initrd-end = <0x42800000>;
  48
  49		/*
  50		 * Stock bootloader provides incorrect memory size in ATAG_MEM;
  51		 * override it here
  52		 */
  53		linux,usable-memory-range = <0x40000000 0x3fc00000>;
  54	};
  55
  56	firmware@204f000 {
  57		compatible = "samsung,secure-firmware";
  58		reg = <0x0204F000 0x1000>;
  59	};
  60
  61	fixed-rate-clocks {
  62		xxti {
  63			compatible = "samsung,clock-xxti";
  64			clock-frequency = <0>;
  65		};
  66
  67		xusbxti {
  68			compatible = "samsung,clock-xusbxti";
  69			clock-frequency = <24000000>;
  70		};
  71	};
  72
  73	gpio-keys {
  74		compatible = "gpio-keys";
  75		pinctrl-names = "default";
  76		pinctrl-0 = <&gpio_keys>;
  77
  78		key-power {
  79			gpios = <&gpx2 7 GPIO_ACTIVE_LOW>;
  80			linux,code = <KEY_POWER>;
  81			label = "power";
  82			debounce-interval = <10>;
  83			wakeup-source;
  84		};
  85
  86		key-up {
  87			gpios = <&gpx2 2 GPIO_ACTIVE_LOW>;
  88			linux,code = <KEY_VOLUMEUP>;
  89			label = "volume down";
  90			debounce-interval = <10>;
  91		};
  92
  93		key-down {
  94			gpios = <&gpx3 3 GPIO_ACTIVE_LOW>;
  95			linux,code = <KEY_VOLUMEDOWN>;
  96			label = "volume up";
  97			debounce-interval = <10>;
  98		};
  99
 100		key-home {
 101			gpios = <&gpx1 2 GPIO_ACTIVE_LOW>;
 102			linux,code = <KEY_HOME>;
 103			label = "home";
 104			debounce-interval = <10>;
 105		};
 106
 107		switch-hall-sensor {
 108			gpios = <&gpx2 4 GPIO_ACTIVE_LOW>;
 109			linux,input-type = <EV_SW>;
 110			linux,code = <SW_LID>;
 111			linux,can-disable;
 112			label = "hall effect sensor";
 113			debounce-interval = <10>;
 114			wakeup-source;
 115		};
 116	};
 117
 118	led-touchkeys {
 119		compatible = "regulator-led";
 120		vled-supply = <&ldo20_reg>;
 121		default-state = "off";
 122		function = LED_FUNCTION_KBD_BACKLIGHT;
 123		color = <LED_COLOR_ID_WHITE>;
 124	};
 125
 126	i2c_max77693: i2c-9 {
 127		compatible = "i2c-gpio";
 128		sda-gpios = <&gpm2 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 129		scl-gpios = <&gpm2 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 130		i2c-gpio,delay-us = <2>;
 131		#address-cells = <1>;
 132		#size-cells = <0>;
 133
 134		pmic@66 {
 135			compatible = "maxim,max77693";
 136			reg = <0x66>;
 137			interrupt-parent = <&gpx1>;
 138			interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
 139			pinctrl-names = "default";
 140			pinctrl-0 = <&max77693_irq>;
 141
 142			regulators {
 143				esafeout1_reg: ESAFEOUT1 {
 144					regulator-name = "ESAFEOUT1";
 145					regulator-boot-on;
 146				};
 147
 148				esafeout2_reg: ESAFEOUT2 {
 149					regulator-name = "ESAFEOUT2";
 150				};
 151
 152				charger_reg: CHARGER {
 153					regulator-name = "CHARGER";
 154					regulator-min-microamp = <60000>;
 155					regulator-max-microamp = <2580000>;
 156					regulator-boot-on;
 157				};
 158			};
 159
 160			charger {
 161				compatible = "maxim,max77693-charger";
 162
 163				maxim,constant-microvolt = <4350000>;
 164				maxim,min-system-microvolt = <3600000>;
 165				maxim,thermal-regulation-celsius = <100>;
 166				maxim,battery-overcurrent-microamp = <3500000>;
 167				maxim,charge-input-threshold-microvolt = <4300000>;
 168			};
 169		};
 170	};
 171
 172	i2c_max77693_fuel: i2c-10 {
 173		compatible = "i2c-gpio";
 174		sda-gpios = <&gpy0 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 175		scl-gpios = <&gpy0 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 176		i2c-gpio,delay-us = <2>;
 177		#address-cells = <1>;
 178		#size-cells = <0>;
 179
 180		fuel-gauge@36 {
 181			compatible = "maxim,max17050";
 182			reg = <0x36>;
 183			interrupt-parent = <&gpx2>;
 184			interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
 185			pinctrl-names = "default";
 186			pinctrl-0 = <&max77693_fuel_irq>;
 187
 188			maxim,over-heat-temp = <500>;
 189			maxim,over-volt = <4500>;
 190		};
 191	};
 192
 193	i2c_magnetometer: i2c-11 {
 194		compatible = "i2c-gpio";
 195		sda-gpios = <&gpy2 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 196		scl-gpios = <&gpy2 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 197		i2c-gpio,delay-us = <2>;
 198		#address-cells = <1>;
 199		#size-cells = <0>;
 200
 201		magnetometer@2e {
 202			compatible = "yamaha,yas532";
 203			reg = <0x2e>;
 204			iovdd-supply = <&ldo3_reg>;
 205			mount-matrix = "-1", "0", "0",
 206					  "0", "1", "0",
 207					  "0", "0", "-1";
 208		};
 209	};
 210
 211	i2c_lightsensor: i2c-12 {
 212		compatible = "i2c-gpio";
 213		sda-gpios = <&gpl0 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 214		scl-gpios = <&gpl0 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 215		i2c-gpio,delay-us = <2>;
 216		#address-cells = <1>;
 217		#size-cells = <0>;
 218		status = "disabled";
 219
 220		/* WiFi model uses CM3323, 3G/LTE use CM36653 */
 221	};
 222
 223	i2c_bl: i2c-13 {
 224		compatible = "i2c-gpio";
 225		sda-gpios = <&gpm4 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 226		scl-gpios = <&gpm4 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 227		#address-cells = <1>;
 228		#size-cells = <0>;
 229
 230		backlight: backlight@2c {
 231			compatible = "ti,lp8556";
 232			reg = <0x2c>;
 233
 234			bl-name = "lcd-bl";
 235			dev-ctrl = /bits/ 8 <0x80>;
 236			init-brt = /bits/ 8 <0x78>; /* 120 */
 237
 238			power-supply = <&vbatt_reg>;
 239			enable-supply = <&backlight_reset_supply>;
 240
 241			pwms = <&pwm 1 78770 0>;
 242			pwm-names = "lp8556";
 243
 244			rom-a3h {
 245				rom-addr = /bits/ 8 <0xa3>;
 246				rom-val = /bits/ 8 <0x5e>;
 247			};
 248
 249			rom-a5h {
 250				rom-addr = /bits/ 8 <0xa5>;
 251				rom-val = /bits/ 8 <0x34>;
 252			};
 253
 254			rom-a7h {
 255				rom-addr = /bits/ 8 <0xa7>;
 256				rom-val = /bits/ 8 <0xfa>;
 257			};
 258		};
 259	};
 260
 261	vbatt_reg: voltage-regulator-1 {
 262		compatible = "regulator-fixed";
 263		regulator-name = "VBATT";
 264		regulator-min-microvolt = <5000000>;
 265		regulator-max-microvolt = <5000000>;
 266		regulator-always-on;
 267	};
 268
 269	backlight_reset_supply: voltage-regulator-2 {
 270		compatible = "regulator-fixed";
 271		regulator-name = "BACKLIGHT_ENVDDIO";
 272		pinctrl-names = "default";
 273		pinctrl-0 = <&backlight_reset>;
 274		gpio = <&gpm0 1 GPIO_ACTIVE_HIGH>;
 275		enable-active-high;
 276	};
 277
 278	display_3v3_supply: voltage-regulator-3 {
 279		compatible = "regulator-fixed";
 280		regulator-name = "DISPLAY_3.3V";
 281		regulator-min-microvolt = <3300000>;
 282		regulator-max-microvolt = <3300000>;
 283		pinctrl-names = "default";
 284		pinctrl-0 = <&lcd_en>;
 285		gpio = <&gpc0 1 GPIO_ACTIVE_HIGH>; /* LCD_EN */
 286		enable-active-high;
 287	};
 288
 289	mic_bias_reg: voltage-regulator-4 {
 290		compatible = "regulator-fixed";
 291		regulator-name = "MICBIAS_LDO_2.8V";
 292		regulator-min-microvolt = <2800000>;
 293		regulator-max-microvolt = <2800000>;
 294	};
 295
 296	submic_bias_reg: voltage-regulator-5 {
 297		compatible = "regulator-fixed";
 298		regulator-name = "SUB_MICBIAS_LDO_2.8V";
 299		regulator-min-microvolt = <2800000>;
 300		regulator-max-microvolt = <2800000>;
 301	};
 302
 303	earmic_bias_reg: voltage-regulator-6 {
 304		compatible = "regulator-fixed";
 305		regulator-name = "EAR_MICBIAS_LDO_2.8V";
 306		regulator-min-microvolt = <2800000>;
 307		regulator-max-microvolt = <2800000>;
 308		gpio = <&gpm0 0 GPIO_ACTIVE_HIGH>;
 309		enable-active-high;
 310	};
 311
 312	sound: sound {
 313		compatible = "samsung,midas-audio";
 314		model = "TAB3";
 315		mic-bias-supply = <&mic_bias_reg>;
 316		submic-bias-supply = <&submic_bias_reg>;
 317
 318		lineout-sel-gpios = <&gpj1 2 GPIO_ACTIVE_HIGH>;
 319
 320		headset-mic-bias-supply = <&earmic_bias_reg>;
 321		headset-detect-gpios = <&gpx0 4 GPIO_ACTIVE_LOW>;
 322		headset-key-gpios = <&gpx3 6 GPIO_ACTIVE_LOW>;
 323		samsung,headset-4pole-threshold-microvolt = <710 2000>;
 324		samsung,headset-button-threshold-microvolt = <0 130 260>;
 325		io-channel-names = "headset-detect";
 326		io-channels = <&adc 0>;
 327
 328		audio-routing = "HP", "HPOUT1L",
 329				"HP", "HPOUT1R",
 330
 331				"SPK", "SPKOUTLN",
 332				"SPK", "SPKOUTLP",
 333				"SPK", "SPKOUTRN",
 334				"SPK", "SPKOUTRP",
 335
 336				"RCV", "HPOUT2N",
 337				"RCV", "HPOUT2P",
 338
 339				"LINE", "LINEOUT2N",
 340				"LINE", "LINEOUT2P",
 341
 342				"HDMI", "LINEOUT1N",
 343				"HDMI", "LINEOUT1P",
 344
 345				"IN2LP:VXRN", "MICBIAS1",
 346				"IN2LN", "MICBIAS1",
 347				"Main Mic", "MICBIAS1",
 348
 349				"IN1RP", "MICBIAS2",
 350				"IN1RN", "MICBIAS2",
 351				"Sub Mic", "MICBIAS2",
 352
 353				"IN1LP", "Headset Mic",
 354				"IN1LN", "Headset Mic";
 355
 356		cpu {
 357			sound-dai = <&i2s0 0>;
 358		};
 359
 360		codec {
 361			sound-dai = <&wm1811>;
 362		};
 363	};
 364
 365	wlan_pwrseq: sdhci3-pwrseq {
 366		compatible = "mmc-pwrseq-simple";
 367		reset-gpios = <&gpm3 5 GPIO_ACTIVE_LOW>;
 368		clocks = <&s5m8767_osc S2MPS11_CLK_BT>;
 369		clock-names = "ext_clock";
 370	};
 371};
 372
 373&adc {
 374	vdd-supply = <&ldo3_reg>;
 375	status = "okay";
 376};
 377
 378&bus_acp {
 379	devfreq = <&bus_dmc>;
 380	status = "okay";
 381};
 382
 383&bus_c2c {
 384	devfreq = <&bus_dmc>;
 385	status = "okay";
 386};
 387
 388&bus_display {
 389	devfreq = <&bus_leftbus>;
 390	status = "okay";
 391};
 392
 393&bus_dmc {
 394	devfreq-events = <&ppmu_dmc0_3>, <&ppmu_dmc1_3>;
 395	vdd-supply = <&buck1_reg>;
 396	status = "okay";
 397};
 398
 399&bus_fsys {
 400	devfreq = <&bus_leftbus>;
 401	status = "okay";
 402};
 403
 404&bus_leftbus {
 405	devfreq-events = <&ppmu_leftbus_3>, <&ppmu_rightbus_3>;
 406	vdd-supply = <&buck3_reg>;
 407	status = "okay";
 408};
 409
 410&bus_mfc {
 411	devfreq = <&bus_leftbus>;
 412	status = "okay";
 413};
 414
 415&bus_peri {
 416	devfreq = <&bus_leftbus>;
 417	status = "okay";
 418};
 419
 420&bus_rightbus {
 421	devfreq = <&bus_leftbus>;
 422	status = "okay";
 423};
 424
 425&cpu0 {
 426	cpu0-supply = <&buck2_reg>;
 427};
 428
 429&cpu_thermal {
 430	cooling-maps {
 431		map0 {
 432			/* Corresponds to 800MHz at freq_table */
 433			cooling-device = <&cpu0 7 7>, <&cpu1 7 7>;
 434		};
 435		map1 {
 436			/* Corresponds to 200MHz at freq_table */
 437			cooling-device = <&cpu0 13 13>, <&cpu1 13 13>;
 438		};
 439	};
 440};
 441
 442&dsi_0 {
 443	vddcore-supply = <&ldo8_reg>;
 444	vddio-supply = <&ldo10_reg>;
 445	samsung,burst-clock-frequency = <500000000>;
 446	samsung,esc-clock-frequency = <20000000>;
 447	samsung,pll-clock-frequency = <24000000>;
 448	status = "okay";
 449
 450	panel@0 {
 451		compatible = "samsung,lsl080al02", "samsung,s6d7aa0";
 452		reg = <0>;
 453		power-supply = <&display_3v3_supply>;
 454		pinctrl-names = "default";
 455		pinctrl-0 = <&lcd_nrst>;
 456		reset-gpios = <&gpf0 4 GPIO_ACTIVE_LOW>;
 457		backlight = <&backlight>;
 458	};
 459};
 460
 461&exynos_usbphy {
 462	vbus-supply = <&esafeout1_reg>;
 463	status = "okay";
 464};
 465
 466&fimd {
 467	samsung,invert-vclk;
 468	status = "okay";
 469};
 470
 471&gpu {
 472	mali-supply = <&buck4_reg>;
 473	status = "okay";
 474};
 475
 476&hsotg {
 477	vusb_d-supply = <&ldo15_reg>;
 478	vusb_a-supply = <&ldo12_reg>;
 479	dr_mode = "otg";
 480	status = "okay";
 481};
 482
 483&i2c_1 {
 484	pinctrl-0 = <&i2c1_bus>;
 485	pinctrl-names = "default";
 486	status = "okay";
 487
 488	lis3dh: accelerometer@19 {
 489		/* K2DH seems to be the same as lis2dh12 in terms of registers */
 490		compatible = "st,lis2dh12-accel";
 491		reg = <0x19>;
 492
 493		interrupt-parent = <&gpx0>;
 494		interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
 495
 496		vdd-supply = <&ldo17_reg>;
 497		vddio-supply = <&ldo3_reg>;
 498
 499		mount-matrix = "-1", "0", "0",
 500				  "0", "1", "0",
 501				  "0", "0", "-1";
 502	};
 503};
 504
 505&i2c_3 {
 506	samsung,i2c-sda-delay = <100>;
 507	samsung,i2c-slave-addr = <0x10>;
 508	samsung,i2c-max-bus-freq = <400000>;
 509	pinctrl-0 = <&i2c3_bus>;
 510	pinctrl-names = "default";
 511	status = "okay";
 512
 513	touchscreen@48 {
 514		/* MELFAS MMS252, using MMS114 compatible for now */
 515		compatible = "melfas,mms114";
 516		reg = <0x48>;
 517		interrupt-parent = <&gpb>;
 518		interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
 519		touchscreen-size-x = <800>;
 520		touchscreen-size-y = <1280>;
 521		avdd-supply = <&ldo21_reg>;
 522		vdd-supply = <&ldo25_reg>;
 523		linux,keycodes = <KEY_MENU KEY_BACK>;
 524	};
 525};
 526
 527&i2c_4 {
 528	samsung,i2c-sda-delay = <100>;
 529	samsung,i2c-slave-addr = <0x10>;
 530	samsung,i2c-max-bus-freq = <100000>;
 531	pinctrl-0 = <&i2c4_bus>;
 532	pinctrl-names = "default";
 533	status = "okay";
 534
 535	wm1811: audio-codec@1a {
 536		compatible = "wlf,wm1811";
 537		reg = <0x1a>;
 538		clocks = <&pmu_system_controller 0>,
 539			 <&s5m8767_osc S2MPS11_CLK_BT>;
 540		clock-names = "MCLK1", "MCLK2";
 541		interrupt-controller;
 542		#interrupt-cells = <2>;
 543
 544		gpio-controller;
 545		#gpio-cells = <2>;
 546		#sound-dai-cells = <0>;
 547
 548		wlf,gpio-cfg = <0x3 0x0 0x0 0x0 0x0 0x0
 549			0x0 0x8000 0x0 0x0 0x0>;
 550		wlf,micbias-cfg = <0x25 0x2f>;
 551
 552		wlf,lineout1-feedback;
 553		wlf,lineout1-se;
 554		wlf,lineout2-se;
 555		wlf,ldoena-always-driven;
 556
 557		AVDD2-supply = <&ldo3_reg>;
 558		CPVDD-supply = <&ldo3_reg>;
 559		DBVDD1-supply = <&ldo3_reg>;
 560		DBVDD2-supply = <&ldo3_reg>;
 561		DBVDD3-supply = <&ldo3_reg>;
 562		SPKVDD1-supply = <&vbatt_reg>;
 563		SPKVDD2-supply = <&vbatt_reg>;
 564		wlf,ldo1ena-gpios = <&gpm4 4 GPIO_ACTIVE_HIGH>;
 565		wlf,ldo2ena-gpios = <&gpm4 4 GPIO_ACTIVE_HIGH>;
 566	};
 567};
 568
 569&i2c_7 {
 570	samsung,i2c-sda-delay = <100>;
 571	samsung,i2c-slave-addr = <0x10>;
 572	samsung,i2c-max-bus-freq = <100000>;
 573	pinctrl-0 = <&i2c7_bus>;
 574	pinctrl-names = "default";
 575	status = "okay";
 576
 577	s5m8767: pmic@66 {
 578		compatible = "samsung,s5m8767-pmic";
 579		reg = <0x66>;
 580		interrupt-parent = <&gpx0>;
 581		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
 582		pinctrl-names = "default";
 583		pinctrl-0 = <&s5m8767_irq &s5m8767_dvs &s5m8767_ds>;
 584		wakeup-source;
 585
 586		s5m8767,pmic-buck-default-dvs-idx = <1>;
 587
 588		s5m8767,pmic-buck-dvs-gpios = <&gpm3 0 GPIO_ACTIVE_HIGH>,
 589						 <&gpm3 1 GPIO_ACTIVE_HIGH>,
 590						 <&gpm3 2 GPIO_ACTIVE_HIGH>;
 591
 592		s5m8767,pmic-buck-ds-gpios = <&gpf3 1 GPIO_ACTIVE_HIGH>,
 593						 <&gpf3 2 GPIO_ACTIVE_HIGH>,
 594						 <&gpf3 3 GPIO_ACTIVE_HIGH>;
 595
 596		s5m8767,pmic-buck2-dvs-voltage = <1100000>, <1100000>,
 597						<1100000>, <1100000>,
 598						<1100000>, <1100000>,
 599						<1100000>, <1100000>;
 600
 601		s5m8767,pmic-buck3-dvs-voltage = <1100000>, <1100000>,
 602						<1100000>, <1100000>,
 603						<1100000>, <1100000>,
 604						<1100000>, <1100000>;
 605
 606		s5m8767,pmic-buck4-dvs-voltage = <1100000>, <1100000>,
 607						<1100000>, <1100000>,
 608						<1100000>, <1100000>,
 609						<1100000>, <1100000>;
 610
 611		regulators {
 612			ldo1_reg: LDO1 {
 613				regulator-name = "VALIVE_1.0V_AP";
 614				regulator-min-microvolt = <1000000>;
 615				regulator-max-microvolt = <1000000>;
 616				regulator-always-on;
 617				regulator-boot-on;
 618				op_mode = <1>;
 619			};
 620
 621			ldo2_reg: LDO2 {
 622				regulator-name = "VM1M2_1.2V_AP";
 623				regulator-min-microvolt = <1200000>;
 624				regulator-max-microvolt = <1200000>;
 625				regulator-always-on;
 626				regulator-boot-on;
 627				op_mode = <1>;
 628			};
 629
 630			ldo3_reg: LDO3 {
 631				regulator-name = "VCC_1.8V_AP";
 632				regulator-min-microvolt = <1800000>;
 633				regulator-max-microvolt = <1800000>;
 634				regulator-always-on;
 635				op_mode = <1>;
 636			};
 637
 638			ldo5_reg: LDO5 {
 639				regulator-name = "VCC_3.3V_MHL";
 640				regulator-min-microvolt = <3300000>;
 641				regulator-max-microvolt = <3300000>;
 642				op_mode = <1>;
 643			};
 644
 645			ldo8_reg: LDO8 {
 646				regulator-name = "VMIPI_1.0V";
 647				regulator-min-microvolt = <1000000>;
 648				regulator-max-microvolt = <1000000>;
 649				op_mode = <3>;
 650			};
 651
 652			ldo9_reg: LDO9 {
 653				regulator-name = "VSIL_1.2V";
 654				regulator-min-microvolt = <1200000>;
 655				regulator-max-microvolt = <1200000>;
 656				op_mode = <1>;
 657			};
 658
 659			ldo10_reg: LDO10 {
 660				regulator-name = "VMIPI_1.8V";
 661				regulator-min-microvolt = <1800000>;
 662				regulator-max-microvolt = <1800000>;
 663				op_mode = <3>;
 664			};
 665
 666			ldo12_reg: LDO12 {
 667				regulator-name = "VUOTG_3.0V";
 668				regulator-min-microvolt = <3000000>;
 669				regulator-max-microvolt = <3000000>;
 670				op_mode = <1>;
 671				regulator-state-mem {
 672					regulator-off-in-suspend;
 673				};
 674			};
 675
 676			ldo13_reg: LDO13 {
 677				regulator-name = "VCC_1.8V_MHL";
 678				regulator-min-microvolt = <1800000>;
 679				regulator-max-microvolt = <1800000>;
 680				op_mode = <1>;
 681			};
 682
 683			ldo15_reg: LDO15 {
 684				regulator-name = "VHSIC_1.0V";
 685				regulator-min-microvolt = <1000000>;
 686				regulator-max-microvolt = <1000000>;
 687				op_mode = <1>;
 688				regulator-state-mem {
 689					regulator-on-in-suspend;
 690				};
 691			};
 692
 693			ldo17_reg: LDO17 {
 694				regulator-name = "VCC_2.8V_AP";
 695				regulator-min-microvolt = <2800000>;
 696				regulator-max-microvolt = <2800000>;
 697				op_mode = <1>;
 698				regulator-always-on;
 699			};
 700
 701			ldo19_reg: LDO19 {
 702				regulator-name = "VLED_IC_1.9V";
 703				regulator-min-microvolt = <1900000>;
 704				regulator-max-microvolt = <1900000>;
 705				op_mode = <1>;
 706				regulator-always-on;
 707			};
 708
 709			ldo20_reg: LDO20 {
 710				regulator-name = "VTOUCH_3.3V";
 711				regulator-min-microvolt = <3300000>;
 712				regulator-max-microvolt = <3300000>;
 713				op_mode = <1>;
 714			};
 715
 716			ldo21_reg: LDO21 {
 717				regulator-name = "TSP_VDD_3.3V";
 718				regulator-min-microvolt = <3300000>;
 719				regulator-max-microvolt = <3300000>;
 720				op_mode = <1>;
 721			};
 722
 723			ldo22_reg: LDO22 {
 724				regulator-name = "5M_AF_2.8V";
 725				regulator-min-microvolt = <2800000>;
 726				regulator-max-microvolt = <2800000>;
 727				op_mode = <1>;
 728			};
 729
 730			ldo23_reg: LDO23 {
 731				regulator-name = "VTF_2.8V";
 732				regulator-min-microvolt = <2800000>;
 733				regulator-max-microvolt = <2800000>;
 734				op_mode = <3>;
 735			};
 736
 737			ldo24_reg: LDO24 {
 738				regulator-name = "LEDA_2.8V";
 739				regulator-min-microvolt = <2800000>;
 740				regulator-max-microvolt = <2800000>;
 741				op_mode = <1>;
 742			};
 743
 744			ldo25_reg: LDO25 {
 745				regulator-name = "TSP_VDD_1.8V";
 746				regulator-min-microvolt = <1800000>;
 747				regulator-max-microvolt = <1800000>;
 748				op_mode = <1>;
 749			};
 750
 751			ldo26_reg: LDO26 {
 752				regulator-name = "CAM_IO_1.8V";
 753				regulator-min-microvolt = <1800000>;
 754				regulator-max-microvolt = <1800000>;
 755				op_mode = <1>;
 756			};
 757
 758			ldo27_reg: LDO27 {
 759				regulator-name = "VTCAM_1.8V";
 760				regulator-min-microvolt = <1800000>;
 761				regulator-max-microvolt = <1800000>;
 762				op_mode = <1>;
 763			};
 764
 765			buck1_reg: BUCK1 {
 766				regulator-name = "VDD_MIF";
 767				regulator-min-microvolt = <850000>;
 768				regulator-max-microvolt = <1100000>;
 769				regulator-always-on;
 770				regulator-boot-on;
 771				op_mode = <3>;
 772			};
 773
 774			buck2_reg: BUCK2 {
 775				regulator-name = "VDD_ARM";
 776				regulator-min-microvolt = <850000>;
 777				regulator-max-microvolt = <1500000>;
 778				regulator-always-on;
 779				regulator-boot-on;
 780				op_mode = <3>;
 781			};
 782
 783			buck3_reg: BUCK3 {
 784				regulator-name = "VDD_INT";
 785				regulator-min-microvolt = <850000>;
 786				regulator-max-microvolt = <1300000>;
 787				regulator-always-on;
 788				regulator-boot-on;
 789				op_mode = <3>;
 790			};
 791
 792			buck4_reg: BUCK4 {
 793				regulator-name = "VDD_G3D";
 794				regulator-min-microvolt = <850000>;
 795				regulator-max-microvolt = <1150000>;
 796				regulator-boot-on;
 797				op_mode = <3>;
 798			};
 799
 800			buck5_reg: BUCK5 {
 801				regulator-name = "VMEM_1.2V_AP";
 802				regulator-min-microvolt = <1200000>;
 803				regulator-max-microvolt	= <1200000>;
 804				regulator-always-on;
 805				regulator-boot-on;
 806				op_mode = <1>;
 807			};
 808
 809			buck6_reg: BUCK6 {
 810				regulator-name = "CAM_ISP_CORE_1.2V";
 811				regulator-min-microvolt = <1200000>;
 812				regulator-max-microvolt = <1200000>;
 813				op_mode = <1>;
 814
 815				regulator-state-mem {
 816					regulator-off-in-suspend;
 817				};
 818			};
 819		};
 820
 821		s5m8767_osc: clocks {
 822			compatible = "samsung,s5m8767-clk";
 823			#clock-cells = <1>;
 824			clock-output-names = "en32khz_ap",
 825					     "en32khz_cp",
 826					     "en32khz_bt";
 827		};
 828	};
 829};
 830
 831&i2s0 {
 832	pinctrl-0 = <&i2s0_bus>;
 833	pinctrl-names = "default";
 834	status = "okay";
 835};
 836
 837&mshc_0 {
 838	broken-cd;
 839	non-removable;
 840	card-detect-delay = <200>;
 841	vmmc-supply = <&ldo22_reg>;
 842	clock-frequency = <400000000>;
 843	samsung,dw-mshc-ciu-div = <0>;
 844	samsung,dw-mshc-sdr-timing = <2 3>;
 845	samsung,dw-mshc-ddr-timing = <1 2>;
 846	pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>;
 847	pinctrl-names = "default";
 848	bus-width = <8>;
 849	cap-mmc-highspeed;
 850	mmc-ddr-1_8v;
 851	status = "okay";
 852};
 853
 854&pinctrl_0 {
 855	pinctrl-names = "default";
 856	pinctrl-0 = <&sleep0>;
 857
 858	lcd_en: lcd-en-pins {
 859		samsung,pins = "gpc0-1";
 860		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 861		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 862	};
 863
 864	lcd_nrst: lcd-nrst-pins {
 865		samsung,pins = "gpf0-4";
 866		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 867		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 868	};
 869
 870	s5m8767_ds: s5m8767-ds-pins {
 871		samsung,pins = "gpf3-1", "gpf3-2", "gpf3-3";
 872		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 873		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
 874		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 875	};
 876
 877	sleep0: sleep-state {
 878		PIN_SLP(gpa0-0, INPUT, NONE);
 879		PIN_SLP(gpa0-1, OUT0, NONE);
 880		PIN_SLP(gpa0-2, INPUT, NONE);
 881		PIN_SLP(gpa0-3, INPUT, UP);
 882		PIN_SLP(gpa0-4, INPUT, DOWN);
 883		PIN_SLP(gpa0-5, INPUT, DOWN);
 884		PIN_SLP(gpa0-6, INPUT, DOWN);
 885		PIN_SLP(gpa0-7, INPUT, DOWN);
 886
 887		PIN_SLP(gpa1-0, INPUT, DOWN);
 888		PIN_SLP(gpa1-1, INPUT, DOWN);
 889		PIN_SLP(gpa1-2, INPUT, DOWN);
 890		PIN_SLP(gpa1-3, INPUT, DOWN);
 891		PIN_SLP(gpa1-4, INPUT, DOWN);
 892		PIN_SLP(gpa1-5, INPUT, DOWN);
 893
 894		PIN_SLP(gpb-0, INPUT, NONE);
 895		PIN_SLP(gpb-1, INPUT, NONE);
 896		PIN_SLP(gpb-2, INPUT, NONE);
 897		PIN_SLP(gpb-3, INPUT, NONE);
 898		PIN_SLP(gpb-4, INPUT, DOWN);
 899		PIN_SLP(gpb-5, INPUT, DOWN);
 900		PIN_SLP(gpb-6, INPUT, DOWN);
 901		PIN_SLP(gpb-7, INPUT, DOWN);
 902
 903		PIN_SLP(gpc0-0, INPUT, DOWN);
 904		PIN_SLP(gpc0-1, INPUT, DOWN);
 905		PIN_SLP(gpc0-2, INPUT, NONE);
 906		PIN_SLP(gpc0-3, INPUT, NONE);
 907		PIN_SLP(gpc0-4, INPUT, NONE);
 908
 909		PIN_SLP(gpc1-0, INPUT, DOWN);
 910		PIN_SLP(gpc1-1, INPUT, DOWN);
 911		PIN_SLP(gpc1-2, INPUT, DOWN);
 912		PIN_SLP(gpc1-3, INPUT, DOWN);
 913		PIN_SLP(gpc1-4, INPUT, DOWN);
 914
 915		PIN_SLP(gpd0-0, INPUT, DOWN);
 916		PIN_SLP(gpd0-1, OUT0, NONE);
 917		PIN_SLP(gpd0-2, INPUT, NONE);
 918		PIN_SLP(gpd0-3, INPUT, NONE);
 919
 920		PIN_SLP(gpd1-0, INPUT, DOWN);
 921		PIN_SLP(gpd1-1, INPUT, DOWN);
 922		PIN_SLP(gpd1-2, INPUT, NONE);
 923		PIN_SLP(gpd1-3, INPUT, NONE);
 924
 925		PIN_SLP(gpf0-0, INPUT, DOWN);
 926		PIN_SLP(gpf0-1, INPUT, DOWN);
 927		PIN_SLP(gpf0-2, INPUT, DOWN);
 928		PIN_SLP(gpf0-3, INPUT, DOWN);
 929		PIN_SLP(gpf0-4, OUT0, NONE);
 930		PIN_SLP(gpf0-5, OUT0, NONE);
 931		PIN_SLP(gpf0-6, INPUT, DOWN);
 932		PIN_SLP(gpf0-7, INPUT, DOWN);
 933
 934		PIN_SLP(gpf1-0, INPUT, DOWN);
 935		PIN_SLP(gpf1-1, INPUT, DOWN);
 936		PIN_SLP(gpf1-2, INPUT, DOWN);
 937		PIN_SLP(gpf1-3, INPUT, DOWN);
 938		PIN_SLP(gpf1-4, INPUT, DOWN);
 939		PIN_SLP(gpf1-5, INPUT, DOWN);
 940		PIN_SLP(gpf1-6, INPUT, DOWN);
 941		PIN_SLP(gpf1-7, INPUT, DOWN);
 942
 943		PIN_SLP(gpf2-0, INPUT, DOWN);
 944		PIN_SLP(gpf2-1, INPUT, DOWN);
 945		PIN_SLP(gpf2-2, INPUT, DOWN);
 946		PIN_SLP(gpf2-3, INPUT, DOWN);
 947		PIN_SLP(gpf2-4, INPUT, DOWN);
 948		PIN_SLP(gpf2-5, INPUT, DOWN);
 949		PIN_SLP(gpf2-6, INPUT, DOWN);
 950		PIN_SLP(gpf2-7, INPUT, DOWN);
 951
 952		PIN_SLP(gpf3-0, INPUT, DOWN);
 953		PIN_SLP(gpf3-1, INPUT, DOWN);
 954		PIN_SLP(gpf3-2, INPUT, DOWN);
 955		PIN_SLP(gpf3-3, INPUT, DOWN);
 956		PIN_SLP(gpf3-4, PREV, NONE);
 957		PIN_SLP(gpf3-5, OUT0, DOWN);
 958
 959		PIN_SLP(gpj0-0, INPUT, DOWN);
 960		PIN_SLP(gpj0-1, INPUT, DOWN);
 961		PIN_SLP(gpj0-2, INPUT, DOWN);
 962		PIN_SLP(gpj0-3, OUT0, NONE);
 963		PIN_SLP(gpj0-4, INPUT, DOWN);
 964		PIN_SLP(gpj0-5, INPUT, DOWN);
 965		PIN_SLP(gpj0-6, OUT0, NONE);
 966		PIN_SLP(gpj0-7, OUT0, NONE);
 967
 968		PIN_SLP(gpj1-0, OUT0, NONE);
 969		PIN_SLP(gpj1-1, INPUT, DOWN);
 970		PIN_SLP(gpj1-2, PREV, NONE);
 971		PIN_SLP(gpj1-3, INPUT, DOWN);
 972		PIN_SLP(gpj1-4, INPUT, DOWN);
 973	};
 974};
 975
 976&pinctrl_1 {
 977	pinctrl-names = "default";
 978	pinctrl-0 = <&sleep1>;
 979
 980	bt_shutdown: bt-shutdown-pins {
 981		samsung,pins = "gpl0-6";
 982		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 983	};
 984
 985	bt_host_wakeup: bt-host-wakeup-pins {
 986		samsung,pins = "gpx2-6";
 987		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 988	};
 989
 990	bt_device_wakeup: bt-device-wakeup-pins {
 991		samsung,pins = "gpx3-1";
 992		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 993	};
 994
 995	backlight_reset: backlight-reset-pins {
 996		samsung,pins = "gpm0-1";
 997		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 998		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 999	};
1000
1001	gpio_keys: gpio-keys-pins {
1002		samsung,pins = "gpx1-2", "gpx2-2", "gpx2-4", "gpx2-7", "gpx3-3";
1003		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
1004	};
1005
1006	max77693_irq: max77693-irq-pins {
1007		samsung,pins = "gpx1-5";
1008		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
1009		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
1010		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
1011	};
1012
1013	max77693_fuel_irq: max77693-fuel-irq-pins {
1014		samsung,pins = "gpx2-3";
1015		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
1016		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
1017		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
1018	};
1019
1020	sdhci2_cd: sdhci2-cd-irq-pins {
1021		samsung,pins = "gpx3-4";
1022		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
1023		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
1024		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
1025	};
1026
1027	s5m8767_dvs: s5m8767-dvs-pins {
1028		samsung,pins = "gpm3-0", "gpm3-1", "gpm3-2";
1029		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
1030		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
1031		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
1032	};
1033
1034	s5m8767_irq: s5m8767-irq-pins {
1035		samsung,pins = "gpx0-7";
1036		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
1037		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
1038		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
1039	};
1040
1041	sleep1: sleep-state {
1042		PIN_SLP(gpk0-0, PREV, NONE);
1043		PIN_SLP(gpk0-1, PREV, NONE);
1044		PIN_SLP(gpk0-2, PREV, NONE);
1045		PIN_SLP(gpk0-3, PREV, NONE);
1046		PIN_SLP(gpk0-4, PREV, NONE);
1047		PIN_SLP(gpk0-5, PREV, NONE);
1048		PIN_SLP(gpk0-6, PREV, NONE);
1049
1050		PIN_SLP(gpk1-0, INPUT, DOWN);
1051		PIN_SLP(gpk1-1, INPUT, DOWN);
1052		PIN_SLP(gpk1-2, INPUT, DOWN);
1053		PIN_SLP(gpk1-3, PREV, NONE);
1054		PIN_SLP(gpk1-4, PREV, NONE);
1055		PIN_SLP(gpk1-5, PREV, NONE);
1056		PIN_SLP(gpk1-6, PREV, NONE);
1057
1058		PIN_SLP(gpk2-0, INPUT, DOWN);
1059		PIN_SLP(gpk2-1, INPUT, DOWN);
1060		PIN_SLP(gpk2-2, INPUT, DOWN);
1061		PIN_SLP(gpk2-3, INPUT, DOWN);
1062		PIN_SLP(gpk2-4, INPUT, DOWN);
1063		PIN_SLP(gpk2-5, INPUT, DOWN);
1064		PIN_SLP(gpk2-6, INPUT, DOWN);
1065
1066		PIN_SLP(gpk3-0, OUT0, NONE);
1067		PIN_SLP(gpk3-1, INPUT, NONE);
1068		PIN_SLP(gpk3-2, INPUT, DOWN);
1069		PIN_SLP(gpk3-3, INPUT, NONE);
1070		PIN_SLP(gpk3-4, INPUT, NONE);
1071		PIN_SLP(gpk3-5, INPUT, NONE);
1072		PIN_SLP(gpk3-6, INPUT, NONE);
1073
1074		PIN_SLP(gpl0-0, INPUT, DOWN);
1075		PIN_SLP(gpl0-1, INPUT, NONE);
1076		PIN_SLP(gpl0-2, INPUT, NONE);
1077		PIN_SLP(gpl0-3, INPUT, DOWN);
1078		PIN_SLP(gpl0-4, INPUT, DOWN);
1079		PIN_SLP(gpl0-6, PREV, NONE);
1080
1081		PIN_SLP(gpl1-0, INPUT, DOWN);
1082		PIN_SLP(gpl1-1, OUT0, NONE);
1083		PIN_SLP(gpl2-0, INPUT, DOWN);
1084		PIN_SLP(gpl2-1, PREV, NONE);
1085		PIN_SLP(gpl2-2, PREV, NONE);
1086		PIN_SLP(gpl2-3, INPUT, DOWN);
1087		PIN_SLP(gpl2-4, INPUT, DOWN);
1088		PIN_SLP(gpl2-5, INPUT, DOWN);
1089		PIN_SLP(gpl2-6, INPUT, DOWN);
1090		PIN_SLP(gpl2-7, INPUT, DOWN);
1091
1092		PIN_SLP(gpm0-0, PREV, NONE);
1093		PIN_SLP(gpm0-1, OUT0, NONE);
1094		PIN_SLP(gpm0-2, INPUT, DOWN);
1095		PIN_SLP(gpm0-3, INPUT, DOWN);
1096		PIN_SLP(gpm0-4, INPUT, DOWN);
1097		PIN_SLP(gpm0-5, INPUT, DOWN);
1098		PIN_SLP(gpm0-6, INPUT, DOWN);
1099		PIN_SLP(gpm0-7, INPUT, DOWN);
1100
1101		PIN_SLP(gpm1-0, INPUT, DOWN);
1102		PIN_SLP(gpm1-1, INPUT, DOWN);
1103		PIN_SLP(gpm1-2, INPUT, NONE);
1104		PIN_SLP(gpm1-3, INPUT, NONE);
1105		PIN_SLP(gpm1-4, INPUT, NONE);
1106		PIN_SLP(gpm1-5, INPUT, NONE);
1107		PIN_SLP(gpm1-6, OUT0, NONE);
1108
1109		PIN_SLP(gpm2-0, INPUT, NONE);
1110		PIN_SLP(gpm2-1, INPUT, NONE);
1111		PIN_SLP(gpm2-2, OUT0, NONE);
1112		PIN_SLP(gpm2-3, INPUT, DOWN);
1113		PIN_SLP(gpm2-4, INPUT, DOWN);
1114
1115		PIN_SLP(gpm3-0, PREV, NONE);
1116		PIN_SLP(gpm3-1, PREV, NONE);
1117		PIN_SLP(gpm3-2, PREV, NONE);
1118		PIN_SLP(gpm3-3, INPUT, DOWN);
1119		PIN_SLP(gpm3-4, INPUT, DOWN);
1120		PIN_SLP(gpm3-5, PREV, NONE);
1121		PIN_SLP(gpm3-6, INPUT, DOWN);
1122		PIN_SLP(gpm3-7, OUT0, NONE);
1123
1124		PIN_SLP(gpm4-0, INPUT, DOWN);
1125		PIN_SLP(gpm4-1, INPUT, DOWN);
1126		PIN_SLP(gpm4-2, INPUT, DOWN);
1127		PIN_SLP(gpm4-3, INPUT, DOWN);
1128		PIN_SLP(gpm4-4, PREV, NONE);
1129		PIN_SLP(gpm4-5, INPUT, NONE);
1130		PIN_SLP(gpm4-6, INPUT, DOWN);
1131		PIN_SLP(gpm4-7, INPUT, DOWN);
1132
1133		PIN_SLP(gpy0-0, INPUT, DOWN);
1134		PIN_SLP(gpy0-1, INPUT, DOWN);
1135		PIN_SLP(gpy0-2, INPUT, NONE);
1136		PIN_SLP(gpy0-3, INPUT, NONE);
1137		PIN_SLP(gpy0-4, INPUT, DOWN);
1138		PIN_SLP(gpy0-5, INPUT, DOWN);
1139
1140		PIN_SLP(gpy1-0, INPUT, DOWN);
1141		PIN_SLP(gpy1-1, INPUT, DOWN);
1142		PIN_SLP(gpy1-2, INPUT, DOWN);
1143		PIN_SLP(gpy1-3, INPUT, DOWN);
1144
1145		PIN_SLP(gpy2-0, PREV, NONE);
1146		PIN_SLP(gpy2-1, INPUT, DOWN);
1147		PIN_SLP(gpy2-2, INPUT, NONE);
1148		PIN_SLP(gpy2-3, INPUT, NONE);
1149		PIN_SLP(gpy2-4, INPUT, NONE);
1150		PIN_SLP(gpy2-5, INPUT, NONE);
1151
1152		PIN_SLP(gpy3-0, INPUT, DOWN);
1153		PIN_SLP(gpy3-1, INPUT, DOWN);
1154		PIN_SLP(gpy3-2, INPUT, DOWN);
1155		PIN_SLP(gpy3-3, INPUT, DOWN);
1156		PIN_SLP(gpy3-4, INPUT, DOWN);
1157		PIN_SLP(gpy3-5, INPUT, DOWN);
1158		PIN_SLP(gpy3-6, INPUT, DOWN);
1159		PIN_SLP(gpy3-7, INPUT, DOWN);
1160
1161		PIN_SLP(gpy4-0, INPUT, DOWN);
1162		PIN_SLP(gpy4-1, INPUT, DOWN);
1163		PIN_SLP(gpy4-2, INPUT, DOWN);
1164		PIN_SLP(gpy4-3, INPUT, DOWN);
1165		PIN_SLP(gpy4-4, INPUT, DOWN);
1166		PIN_SLP(gpy4-5, INPUT, DOWN);
1167		PIN_SLP(gpy4-6, INPUT, DOWN);
1168		PIN_SLP(gpy4-7, INPUT, DOWN);
1169
1170		PIN_SLP(gpy5-0, INPUT, DOWN);
1171		PIN_SLP(gpy5-1, INPUT, DOWN);
1172		PIN_SLP(gpy5-2, INPUT, DOWN);
1173		PIN_SLP(gpy5-3, INPUT, DOWN);
1174		PIN_SLP(gpy5-4, INPUT, DOWN);
1175		PIN_SLP(gpy5-5, INPUT, DOWN);
1176		PIN_SLP(gpy5-6, INPUT, DOWN);
1177		PIN_SLP(gpy5-7, INPUT, DOWN);
1178
1179		PIN_SLP(gpy6-0, INPUT, DOWN);
1180		PIN_SLP(gpy6-1, INPUT, DOWN);
1181		PIN_SLP(gpy6-2, INPUT, DOWN);
1182		PIN_SLP(gpy6-3, INPUT, DOWN);
1183		PIN_SLP(gpy6-4, INPUT, DOWN);
1184		PIN_SLP(gpy6-5, INPUT, DOWN);
1185		PIN_SLP(gpy6-6, INPUT, DOWN);
1186		PIN_SLP(gpy6-7, INPUT, DOWN);
1187	};
1188};
1189
1190&pinctrl_2 {
1191	pinctrl-names = "default";
1192	pinctrl-0 = <&sleep2>;
1193
1194	sleep2: sleep-state {
1195		PIN_SLP(gpz-0, INPUT, DOWN);
1196		PIN_SLP(gpz-1, INPUT, DOWN);
1197		PIN_SLP(gpz-2, INPUT, DOWN);
1198		PIN_SLP(gpz-3, INPUT, DOWN);
1199		PIN_SLP(gpz-4, INPUT, DOWN);
1200		PIN_SLP(gpz-5, INPUT, DOWN);
1201		PIN_SLP(gpz-6, INPUT, DOWN);
1202	};
1203};
1204
1205&pinctrl_3 {
1206	pinctrl-names = "default";
1207	pinctrl-0 = <&sleep3>;
1208
1209	sleep3: sleep-state {
1210		PIN_SLP(gpv0-0, INPUT, DOWN);
1211		PIN_SLP(gpv0-1, INPUT, DOWN);
1212		PIN_SLP(gpv0-2, INPUT, DOWN);
1213		PIN_SLP(gpv0-3, INPUT, DOWN);
1214		PIN_SLP(gpv0-4, INPUT, DOWN);
1215		PIN_SLP(gpv0-5, INPUT, DOWN);
1216		PIN_SLP(gpv0-6, INPUT, DOWN);
1217		PIN_SLP(gpv0-7, INPUT, DOWN);
1218
1219		PIN_SLP(gpv1-0, INPUT, DOWN);
1220		PIN_SLP(gpv1-1, INPUT, DOWN);
1221		PIN_SLP(gpv1-2, INPUT, DOWN);
1222		PIN_SLP(gpv1-3, INPUT, DOWN);
1223		PIN_SLP(gpv1-4, INPUT, DOWN);
1224		PIN_SLP(gpv1-5, INPUT, DOWN);
1225		PIN_SLP(gpv1-6, INPUT, DOWN);
1226		PIN_SLP(gpv1-7, INPUT, DOWN);
1227
1228		PIN_SLP(gpv2-0, INPUT, DOWN);
1229		PIN_SLP(gpv2-1, INPUT, DOWN);
1230		PIN_SLP(gpv2-2, INPUT, DOWN);
1231		PIN_SLP(gpv2-3, INPUT, DOWN);
1232		PIN_SLP(gpv2-4, INPUT, DOWN);
1233		PIN_SLP(gpv2-5, INPUT, DOWN);
1234		PIN_SLP(gpv2-6, INPUT, DOWN);
1235		PIN_SLP(gpv2-7, INPUT, DOWN);
1236
1237		PIN_SLP(gpv3-0, INPUT, DOWN);
1238		PIN_SLP(gpv3-1, INPUT, DOWN);
1239		PIN_SLP(gpv3-2, INPUT, DOWN);
1240		PIN_SLP(gpv3-3, INPUT, DOWN);
1241		PIN_SLP(gpv3-4, INPUT, DOWN);
1242		PIN_SLP(gpv3-5, INPUT, DOWN);
1243		PIN_SLP(gpv3-6, INPUT, DOWN);
1244		PIN_SLP(gpv3-7, INPUT, DOWN);
1245
1246		PIN_SLP(gpv4-0, INPUT, DOWN);
1247		PIN_SLP(gpv4-1, INPUT, DOWN);
1248	};
1249};
1250
1251&pmu_system_controller {
1252	assigned-clocks = <&pmu_system_controller 0>;
1253	assigned-clock-parents = <&clock CLK_XUSBXTI>;
1254};
1255
1256&pwm {
1257	pinctrl-0 = <&pwm1_out>;
1258	pinctrl-names = "default";
1259	samsung,pwm-outputs = <1>;
1260	status = "okay";
1261};
1262
1263/*
1264 * The internal RTC does not work; instead, the RTC provided by the
1265 * S5M8766 PMIC is used. Disable the RTC to make sure the working
1266 * one gets used.
1267 *
1268 * We add this node to avoid DTB check warnings, as the Exynos4 RTC
1269 * requires two clocks, and only one is set up by default.
1270 */
1271&rtc {
1272	clocks = <&clock CLK_RTC>, <&s5m8767_osc S2MPS11_CLK_AP>;
1273	clock-names = "rtc", "rtc_src";
1274	status = "disabled";
1275};
1276
1277&sdhci_2 {
1278	bus-width = <4>;
1279	cd-gpios = <&gpx3 4 GPIO_ACTIVE_LOW>;
1280	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &sdhci2_cd>;
1281	pinctrl-names = "default";
1282	vmmc-supply = <&ldo23_reg>;
1283	status = "okay";
1284};
1285
1286&sdhci_3 {
1287	#address-cells = <1>;
1288	#size-cells = <0>;
1289	non-removable;
1290	bus-width = <4>;
1291
1292	mmc-pwrseq = <&wlan_pwrseq>;
1293	pinctrl-names = "default";
1294	pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_bus4>;
1295	status = "okay";
1296
1297	brcmf: wifi@1 {
1298		compatible = "brcm,bcm4334-fmac", "brcm,bcm4329-fmac";
1299		reg = <1>;
1300
1301		interrupt-parent = <&gpx2>;
1302		interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
1303		interrupt-names = "host-wake";
1304	};
1305};
1306
1307&serial_0 {
1308	pinctrl-0 = <&uart0_data &uart0_fctl>;
1309	pinctrl-names = "default";
1310	status = "okay";
1311
1312	bluetooth {
1313		compatible = "brcm,bcm4330-bt"; /* BCM4334B0 */
1314		pinctrl-0 = <&bt_shutdown &bt_device_wakeup &bt_host_wakeup>;
1315		pinctrl-names = "default";
1316		max-speed = <3000000>;
1317		shutdown-gpios = <&gpl0 6 GPIO_ACTIVE_HIGH>;
1318		device-wakeup-gpios = <&gpx3 1 GPIO_ACTIVE_HIGH>;
1319		host-wakeup-gpios = <&gpx2 6 GPIO_ACTIVE_HIGH>;
1320		clocks = <&s5m8767_osc S2MPS11_CLK_BT>;
1321	};
1322};
1323
1324&serial_1 {
1325	status = "okay";
1326};
1327
1328&serial_2 {
1329	status = "okay";
1330};
1331
1332&serial_3 {
1333	status = "okay";
1334};
1335
1336&tmu {
1337	vtmu-supply = <&ldo10_reg>;
1338	status = "okay";
1339};
~/ Read-only file preview.