vf-colibri-eval-v3.dtsi

  1// SPDX-License-Identifier: GPL-2.0+ OR MIT
  2/*
  3 * Copyright 2014-2020 Toradex
  4 */
  5
  6/ {
  7	chosen {
  8		stdout-path = "serial0:115200n8";
  9	};
 10
 11	clk16m: clk16m {
 12		compatible = "fixed-clock";
 13		#clock-cells = <0>;
 14		clock-frequency = <16000000>;
 15	};
 16
 17	panel: panel {
 18		compatible = "edt,et057090dhu";
 19		backlight = <&bl>;
 20		power-supply = <&reg_3v3>;
 21
 22		port {
 23			panel_in: endpoint {
 24				remote-endpoint = <&dcu_out>;
 25			};
 26		};
 27	};
 28
 29	reg_3v3: regulator-3v3 {
 30		compatible = "regulator-fixed";
 31		regulator-name = "3.3V";
 32		regulator-min-microvolt = <3300000>;
 33		regulator-max-microvolt = <3300000>;
 34	};
 35
 36	reg_5v0: regulator-5v0 {
 37		compatible = "regulator-fixed";
 38		regulator-name = "5V";
 39		regulator-min-microvolt = <5000000>;
 40		regulator-max-microvolt = <5000000>;
 41	};
 42
 43	reg_usbh_vbus: regulator-usbh-vbus {
 44		compatible = "regulator-fixed";
 45		pinctrl-names = "default";
 46		pinctrl-0 = <&pinctrl_usbh1_reg>;
 47		regulator-name = "VCC_USB[1-4]";
 48		regulator-min-microvolt = <5000000>;
 49		regulator-max-microvolt = <5000000>;
 50		gpio = <&gpio2 19 GPIO_ACTIVE_LOW>; /* USBH_PEN resp. USBH_P_EN */
 51		vin-supply = <&reg_5v0>;
 52	};
 53};
 54
 55&bl {
 56	brightness-levels = <0 4 8 16 32 64 128 255>;
 57	default-brightness-level = <6>;
 58	power-supply = <&reg_3v3>;
 59	status = "okay";
 60};
 61
 62&dcu0 {
 63	pinctrl-names = "default";
 64	pinctrl-0 = <&pinctrl_dcu0_1>;
 65	status = "okay";
 66
 67	port {
 68		dcu_out: endpoint {
 69			remote-endpoint = <&panel_in>;
 70		};
 71	};
 72};
 73
 74&dspi1 {
 75	status = "okay";
 76
 77	mcp2515can: can@0 {
 78		compatible = "microchip,mcp2515";
 79		pinctrl-names = "default";
 80		pinctrl-0 = <&pinctrl_can_int>;
 81		reg = <0>;
 82		clocks = <&clk16m>;
 83		spi-max-frequency = <10000000>;
 84		interrupt-parent = <&gpio1>;
 85		interrupts = <11 IRQ_TYPE_EDGE_RISING>;
 86	};
 87};
 88
 89&esdhc1 {
 90	pinctrl-names = "default";
 91	pinctrl-0 = <&pinctrl_esdhc1>;
 92	bus-width = <4>;
 93	status = "okay";
 94};
 95
 96&fec1 {
 97	phy-mode = "rmii";
 98	pinctrl-names = "default";
 99	pinctrl-0 = <&pinctrl_fec1>;
100	status = "okay";
101};
102
103&i2c0 {
104	status = "okay";
105
106	/* M41T0M6 real time clock on carrier board */
107	rtc: rtc@68 {
108		compatible = "st,m41t0";
109		reg = <0x68>;
110	};
111};
112
113&pwm0 {
114	status = "okay";
115};
116
117&pwm1 {
118	status = "okay";
119};
120
121&reg_module_3v3 {
122	vin-supply = <&reg_3v3>;
123};
124
125&tcon0 {
126	status = "okay";
127};
128
129&uart0 {
130	status = "okay";
131};
132
133&uart1 {
134	status = "okay";
135};
136
137&uart2 {
138	status = "okay";
139};
140
141&usbh1 {
142	vbus-supply = <&reg_usbh_vbus>;
143};
144
145&iomuxc {
146	pinctrl_can_int: can_intgrp {
147		fsl,pins = <
148			VF610_PAD_PTB21__GPIO_43	0x22ed
149		>;
150	};
151};